| /* |
| * ths7303/53- THS7303/53 Video Amplifier driver |
| * |
| * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ |
| * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. |
| * |
| * Author: Chaithrika U S <chaithrika@ti.com> |
| * |
| * Contributors: |
| * Hans Verkuil <hans.verkuil@cisco.com> |
| * Lad, Prabhakar <prabhakar.lad@ti.com> |
| * Martin Bugge <marbugge@cisco.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed .as is. WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include <media/i2c/ths7303.h> |
| #include <media/v4l2-device.h> |
| |
| #define THS7303_CHANNEL_1 1 |
| #define THS7303_CHANNEL_2 2 |
| #define THS7303_CHANNEL_3 3 |
| |
| struct ths7303_state { |
| struct v4l2_subdev sd; |
| const struct ths7303_platform_data *pdata; |
| struct v4l2_bt_timings bt; |
| int std_id; |
| int stream_on; |
| }; |
| |
| enum ths7303_filter_mode { |
| THS7303_FILTER_MODE_480I_576I, |
| THS7303_FILTER_MODE_480P_576P, |
| THS7303_FILTER_MODE_720P_1080I, |
| THS7303_FILTER_MODE_1080P, |
| THS7303_FILTER_MODE_DISABLE |
| }; |
| |
| MODULE_DESCRIPTION("TI THS7303 video amplifier driver"); |
| MODULE_AUTHOR("Chaithrika U S"); |
| MODULE_LICENSE("GPL"); |
| |
| static inline struct ths7303_state *to_state(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct ths7303_state, sd); |
| } |
| |
| static int ths7303_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| static int ths7303_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret; |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| ret = i2c_smbus_write_byte_data(client, reg, val); |
| if (ret == 0) |
| return 0; |
| } |
| return ret; |
| } |
| |
| /* following function is used to set ths7303 */ |
| static int ths7303_setval(struct v4l2_subdev *sd, |
| enum ths7303_filter_mode mode) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ths7303_state *state = to_state(sd); |
| const struct ths7303_platform_data *pdata = state->pdata; |
| u8 val, sel = 0; |
| int err, disable = 0; |
| |
| if (!client) |
| return -EINVAL; |
| |
| switch (mode) { |
| case THS7303_FILTER_MODE_1080P: |
| sel = 0x3; /*1080p and SXGA/UXGA */ |
| break; |
| case THS7303_FILTER_MODE_720P_1080I: |
| sel = 0x2; /*720p, 1080i and SVGA/XGA */ |
| break; |
| case THS7303_FILTER_MODE_480P_576P: |
| sel = 0x1; /* EDTV 480p/576p and VGA */ |
| break; |
| case THS7303_FILTER_MODE_480I_576I: |
| sel = 0x0; /* SDTV, S-Video, 480i/576i */ |
| break; |
| default: |
| /* disable all channels */ |
| disable = 1; |
| } |
| |
| val = (sel << 6) | (sel << 3); |
| if (!disable) |
| val |= (pdata->ch_1 & 0x27); |
| err = ths7303_write(sd, THS7303_CHANNEL_1, val); |
| if (err) |
| goto out; |
| |
| val = (sel << 6) | (sel << 3); |
| if (!disable) |
| val |= (pdata->ch_2 & 0x27); |
| err = ths7303_write(sd, THS7303_CHANNEL_2, val); |
| if (err) |
| goto out; |
| |
| val = (sel << 6) | (sel << 3); |
| if (!disable) |
| val |= (pdata->ch_3 & 0x27); |
| err = ths7303_write(sd, THS7303_CHANNEL_3, val); |
| if (err) |
| goto out; |
| |
| return 0; |
| out: |
| pr_info("write byte data failed\n"); |
| return err; |
| } |
| |
| static int ths7303_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) |
| { |
| struct ths7303_state *state = to_state(sd); |
| |
| if (norm & (V4L2_STD_ALL & ~V4L2_STD_SECAM)) { |
| state->std_id = 1; |
| state->bt.pixelclock = 0; |
| return ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I); |
| } |
| |
| return ths7303_setval(sd, THS7303_FILTER_MODE_DISABLE); |
| } |
| |
| static int ths7303_config(struct v4l2_subdev *sd) |
| { |
| struct ths7303_state *state = to_state(sd); |
| int res; |
| |
| if (!state->stream_on) { |
| ths7303_write(sd, THS7303_CHANNEL_1, |
| (ths7303_read(sd, THS7303_CHANNEL_1) & 0xf8) | |
| 0x00); |
| ths7303_write(sd, THS7303_CHANNEL_2, |
| (ths7303_read(sd, THS7303_CHANNEL_2) & 0xf8) | |
| 0x00); |
| ths7303_write(sd, THS7303_CHANNEL_3, |
| (ths7303_read(sd, THS7303_CHANNEL_3) & 0xf8) | |
| 0x00); |
| return 0; |
| } |
| |
| if (state->bt.pixelclock > 120000000) |
| res = ths7303_setval(sd, THS7303_FILTER_MODE_1080P); |
| else if (state->bt.pixelclock > 70000000) |
| res = ths7303_setval(sd, THS7303_FILTER_MODE_720P_1080I); |
| else if (state->bt.pixelclock > 20000000) |
| res = ths7303_setval(sd, THS7303_FILTER_MODE_480P_576P); |
| else if (state->std_id) |
| res = ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I); |
| else |
| /* disable all channels */ |
| res = ths7303_setval(sd, THS7303_FILTER_MODE_DISABLE); |
| |
| return res; |
| |
| } |
| |
| static int ths7303_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct ths7303_state *state = to_state(sd); |
| |
| state->stream_on = enable; |
| |
| return ths7303_config(sd); |
| } |
| |
| /* for setting filter for HD output */ |
| static int ths7303_s_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *dv_timings) |
| { |
| struct ths7303_state *state = to_state(sd); |
| |
| if (!dv_timings || dv_timings->type != V4L2_DV_BT_656_1120) |
| return -EINVAL; |
| |
| state->bt = dv_timings->bt; |
| state->std_id = 0; |
| |
| return ths7303_config(sd); |
| } |
| |
| static const struct v4l2_subdev_video_ops ths7303_video_ops = { |
| .s_stream = ths7303_s_stream, |
| .s_std_output = ths7303_s_std_output, |
| .s_dv_timings = ths7303_s_dv_timings, |
| }; |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| |
| static int ths7303_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| reg->size = 1; |
| reg->val = ths7303_read(sd, reg->reg); |
| return 0; |
| } |
| |
| static int ths7303_s_register(struct v4l2_subdev *sd, |
| const struct v4l2_dbg_register *reg) |
| { |
| ths7303_write(sd, reg->reg, reg->val); |
| return 0; |
| } |
| #endif |
| |
| static const char * const stc_lpf_sel_txt[4] = { |
| "500-kHz Filter", |
| "2.5-MHz Filter", |
| "5-MHz Filter", |
| "5-MHz Filter", |
| }; |
| |
| static const char * const in_mux_sel_txt[2] = { |
| "Input A Select", |
| "Input B Select", |
| }; |
| |
| static const char * const lpf_freq_sel_txt[4] = { |
| "9-MHz LPF", |
| "16-MHz LPF", |
| "35-MHz LPF", |
| "Bypass LPF", |
| }; |
| |
| static const char * const in_bias_sel_dis_cont_txt[8] = { |
| "Disable Channel", |
| "Mute Function - No Output", |
| "DC Bias Select", |
| "DC Bias + 250 mV Offset Select", |
| "AC Bias Select", |
| "Sync Tip Clamp with low bias", |
| "Sync Tip Clamp with mid bias", |
| "Sync Tip Clamp with high bias", |
| }; |
| |
| static void ths7303_log_channel_status(struct v4l2_subdev *sd, u8 reg) |
| { |
| u8 val = ths7303_read(sd, reg); |
| |
| if ((val & 0x7) == 0) { |
| v4l2_info(sd, "Channel %d Off\n", reg); |
| return; |
| } |
| |
| v4l2_info(sd, "Channel %d On\n", reg); |
| v4l2_info(sd, " value 0x%x\n", val); |
| v4l2_info(sd, " %s\n", stc_lpf_sel_txt[(val >> 6) & 0x3]); |
| v4l2_info(sd, " %s\n", in_mux_sel_txt[(val >> 5) & 0x1]); |
| v4l2_info(sd, " %s\n", lpf_freq_sel_txt[(val >> 3) & 0x3]); |
| v4l2_info(sd, " %s\n", in_bias_sel_dis_cont_txt[(val >> 0) & 0x7]); |
| } |
| |
| static int ths7303_log_status(struct v4l2_subdev *sd) |
| { |
| struct ths7303_state *state = to_state(sd); |
| |
| v4l2_info(sd, "stream %s\n", state->stream_on ? "On" : "Off"); |
| |
| if (state->bt.pixelclock) { |
| struct v4l2_bt_timings *bt = bt = &state->bt; |
| u32 frame_width, frame_height; |
| |
| frame_width = V4L2_DV_BT_FRAME_WIDTH(bt); |
| frame_height = V4L2_DV_BT_FRAME_HEIGHT(bt); |
| v4l2_info(sd, |
| "timings: %dx%d%s%d (%dx%d). Pix freq. = %d Hz. Polarities = 0x%x\n", |
| bt->width, bt->height, bt->interlaced ? "i" : "p", |
| (frame_height * frame_width) > 0 ? |
| (int)bt->pixelclock / |
| (frame_height * frame_width) : 0, |
| frame_width, frame_height, |
| (int)bt->pixelclock, bt->polarities); |
| } else { |
| v4l2_info(sd, "no timings set\n"); |
| } |
| |
| ths7303_log_channel_status(sd, THS7303_CHANNEL_1); |
| ths7303_log_channel_status(sd, THS7303_CHANNEL_2); |
| ths7303_log_channel_status(sd, THS7303_CHANNEL_3); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops ths7303_core_ops = { |
| .log_status = ths7303_log_status, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = ths7303_g_register, |
| .s_register = ths7303_s_register, |
| #endif |
| }; |
| |
| static const struct v4l2_subdev_ops ths7303_ops = { |
| .core = &ths7303_core_ops, |
| .video = &ths7303_video_ops, |
| }; |
| |
| static int ths7303_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct ths7303_platform_data *pdata = client->dev.platform_data; |
| struct ths7303_state *state; |
| struct v4l2_subdev *sd; |
| |
| if (pdata == NULL) { |
| dev_err(&client->dev, "No platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| v4l_info(client, "chip found @ 0x%x (%s)\n", |
| client->addr << 1, client->adapter->name); |
| |
| state = devm_kzalloc(&client->dev, sizeof(struct ths7303_state), |
| GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| state->pdata = pdata; |
| sd = &state->sd; |
| v4l2_i2c_subdev_init(sd, client, &ths7303_ops); |
| |
| /* set to default 480I_576I filter mode */ |
| if (ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I) < 0) { |
| v4l_err(client, "Setting to 480I_576I filter mode failed!\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int ths7303_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| |
| v4l2_device_unregister_subdev(sd); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id ths7303_id[] = { |
| {"ths7303", 0}, |
| {"ths7353", 0}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, ths7303_id); |
| |
| static struct i2c_driver ths7303_driver = { |
| .driver = { |
| .name = "ths73x3", |
| }, |
| .probe = ths7303_probe, |
| .remove = ths7303_remove, |
| .id_table = ths7303_id, |
| }; |
| |
| module_i2c_driver(ths7303_driver); |