| /* |
| * coretemp.c - Linux kernel module for hardware monitoring |
| * |
| * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> |
| * |
| * Inspired from many hwmon drivers |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301 USA. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/hwmon.h> |
| #include <linux/sysfs.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/list.h> |
| #include <linux/platform_device.h> |
| #include <linux/cpu.h> |
| #include <linux/pci.h> |
| #include <linux/smp.h> |
| #include <asm/msr.h> |
| #include <asm/processor.h> |
| |
| #define DRVNAME "coretemp" |
| |
| #define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */ |
| #define NUM_REAL_CORES 16 /* Number of Real cores per cpu */ |
| #define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */ |
| #define MAX_ATTRS 5 /* Maximum no of per-core attrs */ |
| #define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO) |
| |
| #ifdef CONFIG_SMP |
| #define TO_PHYS_ID(cpu) cpu_data(cpu).phys_proc_id |
| #define TO_CORE_ID(cpu) cpu_data(cpu).cpu_core_id |
| #define TO_ATTR_NO(cpu) (TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO) |
| #define for_each_sibling(i, cpu) for_each_cpu(i, cpu_sibling_mask(cpu)) |
| #else |
| #define TO_PHYS_ID(cpu) (cpu) |
| #define TO_CORE_ID(cpu) (cpu) |
| #define TO_ATTR_NO(cpu) (cpu) |
| #define for_each_sibling(i, cpu) for (i = 0; false; ) |
| #endif |
| |
| /* |
| * Per-Core Temperature Data |
| * @last_updated: The time when the current temperature value was updated |
| * earlier (in jiffies). |
| * @cpu_core_id: The CPU Core from which temperature values should be read |
| * This value is passed as "id" field to rdmsr/wrmsr functions. |
| * @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS, |
| * from where the temperature values should be read. |
| * @is_pkg_data: If this is 1, the temp_data holds pkgtemp data. |
| * Otherwise, temp_data holds coretemp data. |
| * @valid: If this is 1, the current temperature is valid. |
| */ |
| struct temp_data { |
| int temp; |
| int ttarget; |
| int tjmax; |
| unsigned long last_updated; |
| unsigned int cpu; |
| u32 cpu_core_id; |
| u32 status_reg; |
| bool is_pkg_data; |
| bool valid; |
| struct sensor_device_attribute sd_attrs[MAX_ATTRS]; |
| char attr_name[MAX_ATTRS][CORETEMP_NAME_LENGTH]; |
| struct mutex update_lock; |
| }; |
| |
| /* Platform Data per Physical CPU */ |
| struct platform_data { |
| struct device *hwmon_dev; |
| u16 phys_proc_id; |
| struct temp_data *core_data[MAX_CORE_DATA]; |
| struct device_attribute name_attr; |
| }; |
| |
| struct pdev_entry { |
| struct list_head list; |
| struct platform_device *pdev; |
| unsigned int cpu; |
| u16 phys_proc_id; |
| u16 cpu_core_id; |
| }; |
| |
| static LIST_HEAD(pdev_list); |
| static DEFINE_MUTEX(pdev_list_mutex); |
| |
| static ssize_t show_name(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| return sprintf(buf, "%s\n", DRVNAME); |
| } |
| |
| static ssize_t show_label(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| struct temp_data *tdata = pdata->core_data[attr->index]; |
| |
| if (tdata->is_pkg_data) |
| return sprintf(buf, "Physical id %u\n", pdata->phys_proc_id); |
| |
| return sprintf(buf, "Core %u\n", tdata->cpu_core_id); |
| } |
| |
| static ssize_t show_crit_alarm(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| u32 eax, edx; |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| struct temp_data *tdata = pdata->core_data[attr->index]; |
| |
| rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx); |
| |
| return sprintf(buf, "%d\n", (eax >> 5) & 1); |
| } |
| |
| static ssize_t show_tjmax(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tjmax); |
| } |
| |
| static ssize_t show_ttarget(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget); |
| } |
| |
| static ssize_t show_temp(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| u32 eax, edx; |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| struct temp_data *tdata = pdata->core_data[attr->index]; |
| |
| mutex_lock(&tdata->update_lock); |
| |
| /* Check whether the time interval has elapsed */ |
| if (!tdata->valid || time_after(jiffies, tdata->last_updated + HZ)) { |
| rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx); |
| tdata->valid = 0; |
| /* Check whether the data is valid */ |
| if (eax & 0x80000000) { |
| tdata->temp = tdata->tjmax - |
| ((eax >> 16) & 0x7f) * 1000; |
| tdata->valid = 1; |
| } |
| tdata->last_updated = jiffies; |
| } |
| |
| mutex_unlock(&tdata->update_lock); |
| return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN; |
| } |
| |
| static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) |
| { |
| /* The 100C is default for both mobile and non mobile CPUs */ |
| |
| int tjmax = 100000; |
| int tjmax_ee = 85000; |
| int usemsr_ee = 1; |
| int err; |
| u32 eax, edx; |
| struct pci_dev *host_bridge; |
| |
| /* Early chips have no MSR for TjMax */ |
| |
| if (c->x86_model == 0xf && c->x86_mask < 4) |
| usemsr_ee = 0; |
| |
| /* Atom CPUs */ |
| |
| if (c->x86_model == 0x1c) { |
| usemsr_ee = 0; |
| |
| host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); |
| |
| if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL |
| && (host_bridge->device == 0xa000 /* NM10 based nettop */ |
| || host_bridge->device == 0xa010)) /* NM10 based netbook */ |
| tjmax = 100000; |
| else |
| tjmax = 90000; |
| |
| pci_dev_put(host_bridge); |
| } |
| |
| if (c->x86_model > 0xe && usemsr_ee) { |
| u8 platform_id; |
| |
| /* |
| * Now we can detect the mobile CPU using Intel provided table |
| * http://softwarecommunity.intel.com/Wiki/Mobility/720.htm |
| * For Core2 cores, check MSR 0x17, bit 28 1 = Mobile CPU |
| */ |
| err = rdmsr_safe_on_cpu(id, 0x17, &eax, &edx); |
| if (err) { |
| dev_warn(dev, |
| "Unable to access MSR 0x17, assuming desktop" |
| " CPU\n"); |
| usemsr_ee = 0; |
| } else if (c->x86_model < 0x17 && !(eax & 0x10000000)) { |
| /* |
| * Trust bit 28 up to Penryn, I could not find any |
| * documentation on that; if you happen to know |
| * someone at Intel please ask |
| */ |
| usemsr_ee = 0; |
| } else { |
| /* Platform ID bits 52:50 (EDX starts at bit 32) */ |
| platform_id = (edx >> 18) & 0x7; |
| |
| /* |
| * Mobile Penryn CPU seems to be platform ID 7 or 5 |
| * (guesswork) |
| */ |
| if (c->x86_model == 0x17 && |
| (platform_id == 5 || platform_id == 7)) { |
| /* |
| * If MSR EE bit is set, set it to 90 degrees C, |
| * otherwise 105 degrees C |
| */ |
| tjmax_ee = 90000; |
| tjmax = 105000; |
| } |
| } |
| } |
| |
| if (usemsr_ee) { |
| err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx); |
| if (err) { |
| dev_warn(dev, |
| "Unable to access MSR 0xEE, for Tjmax, left" |
| " at default\n"); |
| } else if (eax & 0x40000000) { |
| tjmax = tjmax_ee; |
| } |
| } else if (tjmax == 100000) { |
| /* |
| * If we don't use msr EE it means we are desktop CPU |
| * (with exeception of Atom) |
| */ |
| dev_warn(dev, "Using relative temperature scale!\n"); |
| } |
| |
| return tjmax; |
| } |
| |
| static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) |
| { |
| /* The 100C is default for both mobile and non mobile CPUs */ |
| int err; |
| u32 eax, edx; |
| u32 val; |
| |
| /* |
| * A new feature of current Intel(R) processors, the |
| * IA32_TEMPERATURE_TARGET contains the TjMax value |
| */ |
| err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); |
| if (err) { |
| dev_warn(dev, "Unable to read TjMax from CPU.\n"); |
| } else { |
| val = (eax >> 16) & 0xff; |
| /* |
| * If the TjMax is not plausible, an assumption |
| * will be used |
| */ |
| if (val >= 70 && val <= 125) { |
| dev_info(dev, "TjMax is %d C.\n", val); |
| return val * 1000; |
| } |
| } |
| |
| /* |
| * An assumption is made for early CPUs and unreadable MSR. |
| * NOTE: the calculated value may not be correct. |
| */ |
| return adjust_tjmax(c, id, dev); |
| } |
| |
| static void __devinit get_ucode_rev_on_cpu(void *edx) |
| { |
| u32 eax; |
| |
| wrmsr(MSR_IA32_UCODE_REV, 0, 0); |
| sync_core(); |
| rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx); |
| } |
| |
| static int get_pkg_tjmax(unsigned int cpu, struct device *dev) |
| { |
| int err; |
| u32 eax, edx, val; |
| |
| err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); |
| if (!err) { |
| val = (eax >> 16) & 0xff; |
| if (val > 80 && val < 120) |
| return val * 1000; |
| } |
| dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu); |
| return 100000; /* Default TjMax: 100 degree celsius */ |
| } |
| |
| static int create_name_attr(struct platform_data *pdata, struct device *dev) |
| { |
| sysfs_attr_init(&pdata->name_attr.attr); |
| pdata->name_attr.attr.name = "name"; |
| pdata->name_attr.attr.mode = S_IRUGO; |
| pdata->name_attr.show = show_name; |
| return device_create_file(dev, &pdata->name_attr); |
| } |
| |
| static int create_core_attrs(struct temp_data *tdata, struct device *dev, |
| int attr_no) |
| { |
| int err, i; |
| static ssize_t (*rd_ptr[MAX_ATTRS]) (struct device *dev, |
| struct device_attribute *devattr, char *buf) = { |
| show_label, show_crit_alarm, show_ttarget, |
| show_temp, show_tjmax }; |
| static const char *names[MAX_ATTRS] = { |
| "temp%d_label", "temp%d_crit_alarm", |
| "temp%d_max", "temp%d_input", |
| "temp%d_crit" }; |
| |
| for (i = 0; i < MAX_ATTRS; i++) { |
| snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i], |
| attr_no); |
| sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr); |
| tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i]; |
| tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO; |
| tdata->sd_attrs[i].dev_attr.show = rd_ptr[i]; |
| tdata->sd_attrs[i].dev_attr.store = NULL; |
| tdata->sd_attrs[i].index = attr_no; |
| err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr); |
| if (err) |
| goto exit_free; |
| } |
| return 0; |
| |
| exit_free: |
| while (--i >= 0) |
| device_remove_file(dev, &tdata->sd_attrs[i].dev_attr); |
| return err; |
| } |
| |
| static void update_ttarget(__u8 cpu_model, struct temp_data *tdata, |
| struct device *dev) |
| { |
| int err; |
| u32 eax, edx; |
| |
| /* |
| * Initialize ttarget value. Eventually this will be |
| * initialized with the value from MSR_IA32_THERM_INTERRUPT |
| * register. If IA32_TEMPERATURE_TARGET is supported, this |
| * value will be over written below. |
| * To Do: Patch to initialize ttarget from MSR_IA32_THERM_INTERRUPT |
| */ |
| tdata->ttarget = tdata->tjmax - 20000; |
| |
| /* |
| * Read the still undocumented IA32_TEMPERATURE_TARGET. It exists |
| * on older CPUs but not in this register, |
| * Atoms don't have it either. |
| */ |
| if (cpu_model > 0xe && cpu_model != 0x1c) { |
| err = rdmsr_safe_on_cpu(tdata->cpu, |
| MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); |
| if (err) { |
| dev_warn(dev, |
| "Unable to read IA32_TEMPERATURE_TARGET MSR\n"); |
| } else { |
| tdata->ttarget = tdata->tjmax - |
| ((eax >> 8) & 0xff) * 1000; |
| } |
| } |
| } |
| |
| static int __devinit chk_ucode_version(struct platform_device *pdev) |
| { |
| struct cpuinfo_x86 *c = &cpu_data(pdev->id); |
| int err; |
| u32 edx; |
| |
| /* |
| * Check if we have problem with errata AE18 of Core processors: |
| * Readings might stop update when processor visited too deep sleep, |
| * fixed for stepping D0 (6EC). |
| */ |
| if (c->x86_model == 0xe && c->x86_mask < 0xc) { |
| /* check for microcode update */ |
| err = smp_call_function_single(pdev->id, get_ucode_rev_on_cpu, |
| &edx, 1); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Cannot determine microcode revision of " |
| "CPU#%u (%d)!\n", pdev->id, err); |
| return -ENODEV; |
| } else if (edx < 0x39) { |
| dev_err(&pdev->dev, |
| "Errata AE18 not fixed, update BIOS or " |
| "microcode of the CPU!\n"); |
| return -ENODEV; |
| } |
| } |
| return 0; |
| } |
| |
| static struct platform_device *coretemp_get_pdev(unsigned int cpu) |
| { |
| u16 phys_proc_id = TO_PHYS_ID(cpu); |
| struct pdev_entry *p; |
| |
| mutex_lock(&pdev_list_mutex); |
| |
| list_for_each_entry(p, &pdev_list, list) |
| if (p->phys_proc_id == phys_proc_id) { |
| mutex_unlock(&pdev_list_mutex); |
| return p->pdev; |
| } |
| |
| mutex_unlock(&pdev_list_mutex); |
| return NULL; |
| } |
| |
| static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag) |
| { |
| struct temp_data *tdata; |
| |
| tdata = kzalloc(sizeof(struct temp_data), GFP_KERNEL); |
| if (!tdata) |
| return NULL; |
| |
| tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS : |
| MSR_IA32_THERM_STATUS; |
| tdata->is_pkg_data = pkg_flag; |
| tdata->cpu = cpu; |
| tdata->cpu_core_id = TO_CORE_ID(cpu); |
| mutex_init(&tdata->update_lock); |
| return tdata; |
| } |
| |
| static int create_core_data(struct platform_data *pdata, |
| struct platform_device *pdev, |
| unsigned int cpu, int pkg_flag) |
| { |
| struct temp_data *tdata; |
| struct cpuinfo_x86 *c = &cpu_data(cpu); |
| u32 eax, edx; |
| int err, attr_no; |
| |
| /* |
| * Find attr number for sysfs: |
| * We map the attr number to core id of the CPU |
| * The attr number is always core id + 2 |
| * The Pkgtemp will always show up as temp1_*, if available |
| */ |
| attr_no = pkg_flag ? 1 : TO_ATTR_NO(cpu); |
| |
| if (attr_no > MAX_CORE_DATA - 1) |
| return -ERANGE; |
| |
| /* |
| * Provide a single set of attributes for all HT siblings of a core |
| * to avoid duplicate sensors (the processor ID and core ID of all |
| * HT siblings of a core are the same). |
| * Skip if a HT sibling of this core is already registered. |
| * This is not an error. |
| */ |
| if (pdata->core_data[attr_no] != NULL) |
| return 0; |
| |
| tdata = init_temp_data(cpu, pkg_flag); |
| if (!tdata) |
| return -ENOMEM; |
| |
| /* Test if we can access the status register */ |
| err = rdmsr_safe_on_cpu(cpu, tdata->status_reg, &eax, &edx); |
| if (err) |
| goto exit_free; |
| |
| /* We can access status register. Get Critical Temperature */ |
| if (pkg_flag) |
| tdata->tjmax = get_pkg_tjmax(pdev->id, &pdev->dev); |
| else |
| tdata->tjmax = get_tjmax(c, cpu, &pdev->dev); |
| |
| update_ttarget(c->x86_model, tdata, &pdev->dev); |
| pdata->core_data[attr_no] = tdata; |
| |
| /* Create sysfs interfaces */ |
| err = create_core_attrs(tdata, &pdev->dev, attr_no); |
| if (err) |
| goto exit_free; |
| |
| return 0; |
| exit_free: |
| kfree(tdata); |
| return err; |
| } |
| |
| static void coretemp_add_core(unsigned int cpu, int pkg_flag) |
| { |
| struct platform_data *pdata; |
| struct platform_device *pdev = coretemp_get_pdev(cpu); |
| int err; |
| |
| if (!pdev) |
| return; |
| |
| pdata = platform_get_drvdata(pdev); |
| |
| err = create_core_data(pdata, pdev, cpu, pkg_flag); |
| if (err) |
| dev_err(&pdev->dev, "Adding Core %u failed\n", cpu); |
| } |
| |
| static void coretemp_remove_core(struct platform_data *pdata, |
| struct device *dev, int indx) |
| { |
| int i; |
| struct temp_data *tdata = pdata->core_data[indx]; |
| |
| /* Remove the sysfs attributes */ |
| for (i = 0; i < MAX_ATTRS; i++) |
| device_remove_file(dev, &tdata->sd_attrs[i].dev_attr); |
| |
| kfree(pdata->core_data[indx]); |
| pdata->core_data[indx] = NULL; |
| } |
| |
| static int __devinit coretemp_probe(struct platform_device *pdev) |
| { |
| struct platform_data *pdata; |
| int err; |
| |
| /* Check the microcode version of the CPU */ |
| err = chk_ucode_version(pdev); |
| if (err) |
| return err; |
| |
| /* Initialize the per-package data structures */ |
| pdata = kzalloc(sizeof(struct platform_data), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| err = create_name_attr(pdata, &pdev->dev); |
| if (err) |
| goto exit_free; |
| |
| pdata->phys_proc_id = TO_PHYS_ID(pdev->id); |
| platform_set_drvdata(pdev, pdata); |
| |
| pdata->hwmon_dev = hwmon_device_register(&pdev->dev); |
| if (IS_ERR(pdata->hwmon_dev)) { |
| err = PTR_ERR(pdata->hwmon_dev); |
| dev_err(&pdev->dev, "Class registration failed (%d)\n", err); |
| goto exit_name; |
| } |
| return 0; |
| |
| exit_name: |
| device_remove_file(&pdev->dev, &pdata->name_attr); |
| platform_set_drvdata(pdev, NULL); |
| exit_free: |
| kfree(pdata); |
| return err; |
| } |
| |
| static int __devexit coretemp_remove(struct platform_device *pdev) |
| { |
| struct platform_data *pdata = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = MAX_CORE_DATA - 1; i >= 0; --i) |
| if (pdata->core_data[i]) |
| coretemp_remove_core(pdata, &pdev->dev, i); |
| |
| device_remove_file(&pdev->dev, &pdata->name_attr); |
| hwmon_device_unregister(pdata->hwmon_dev); |
| platform_set_drvdata(pdev, NULL); |
| kfree(pdata); |
| return 0; |
| } |
| |
| static struct platform_driver coretemp_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = DRVNAME, |
| }, |
| .probe = coretemp_probe, |
| .remove = __devexit_p(coretemp_remove), |
| }; |
| |
| static int __cpuinit coretemp_device_add(unsigned int cpu) |
| { |
| int err; |
| struct platform_device *pdev; |
| struct pdev_entry *pdev_entry; |
| |
| mutex_lock(&pdev_list_mutex); |
| |
| pdev = platform_device_alloc(DRVNAME, cpu); |
| if (!pdev) { |
| err = -ENOMEM; |
| pr_err("Device allocation failed\n"); |
| goto exit; |
| } |
| |
| pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); |
| if (!pdev_entry) { |
| err = -ENOMEM; |
| goto exit_device_put; |
| } |
| |
| err = platform_device_add(pdev); |
| if (err) { |
| pr_err("Device addition failed (%d)\n", err); |
| goto exit_device_free; |
| } |
| |
| pdev_entry->pdev = pdev; |
| pdev_entry->cpu = cpu; |
| pdev_entry->phys_proc_id = TO_PHYS_ID(cpu); |
| pdev_entry->cpu_core_id = TO_CORE_ID(cpu); |
| |
| list_add_tail(&pdev_entry->list, &pdev_list); |
| mutex_unlock(&pdev_list_mutex); |
| |
| return 0; |
| |
| exit_device_free: |
| kfree(pdev_entry); |
| exit_device_put: |
| platform_device_put(pdev); |
| exit: |
| mutex_unlock(&pdev_list_mutex); |
| return err; |
| } |
| |
| static void coretemp_device_remove(unsigned int cpu) |
| { |
| struct pdev_entry *p, *n; |
| u16 phys_proc_id = TO_PHYS_ID(cpu); |
| |
| mutex_lock(&pdev_list_mutex); |
| list_for_each_entry_safe(p, n, &pdev_list, list) { |
| if (p->phys_proc_id != phys_proc_id) |
| continue; |
| platform_device_unregister(p->pdev); |
| list_del(&p->list); |
| kfree(p); |
| } |
| mutex_unlock(&pdev_list_mutex); |
| } |
| |
| static bool is_any_core_online(struct platform_data *pdata) |
| { |
| int i; |
| |
| /* Find online cores, except pkgtemp data */ |
| for (i = MAX_CORE_DATA - 1; i >= 0; --i) { |
| if (pdata->core_data[i] && |
| !pdata->core_data[i]->is_pkg_data) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static void __cpuinit get_core_online(unsigned int cpu) |
| { |
| struct cpuinfo_x86 *c = &cpu_data(cpu); |
| struct platform_device *pdev = coretemp_get_pdev(cpu); |
| int err; |
| |
| /* |
| * CPUID.06H.EAX[0] indicates whether the CPU has thermal |
| * sensors. We check this bit only, all the early CPUs |
| * without thermal sensors will be filtered out. |
| */ |
| if (!cpu_has(c, X86_FEATURE_DTS)) |
| return; |
| |
| if (!pdev) { |
| /* |
| * Alright, we have DTS support. |
| * We are bringing the _first_ core in this pkg |
| * online. So, initialize per-pkg data structures and |
| * then bring this core online. |
| */ |
| err = coretemp_device_add(cpu); |
| if (err) |
| return; |
| /* |
| * Check whether pkgtemp support is available. |
| * If so, add interfaces for pkgtemp. |
| */ |
| if (cpu_has(c, X86_FEATURE_PTS)) |
| coretemp_add_core(cpu, 1); |
| } |
| /* |
| * Physical CPU device already exists. |
| * So, just add interfaces for this core. |
| */ |
| coretemp_add_core(cpu, 0); |
| } |
| |
| static void __cpuinit put_core_offline(unsigned int cpu) |
| { |
| int i, indx; |
| struct platform_data *pdata; |
| struct platform_device *pdev = coretemp_get_pdev(cpu); |
| |
| /* If the physical CPU device does not exist, just return */ |
| if (!pdev) |
| return; |
| |
| pdata = platform_get_drvdata(pdev); |
| |
| indx = TO_ATTR_NO(cpu); |
| |
| if (pdata->core_data[indx] && pdata->core_data[indx]->cpu == cpu) |
| coretemp_remove_core(pdata, &pdev->dev, indx); |
| |
| /* |
| * If a HT sibling of a core is taken offline, but another HT sibling |
| * of the same core is still online, register the alternate sibling. |
| * This ensures that exactly one set of attributes is provided as long |
| * as at least one HT sibling of a core is online. |
| */ |
| for_each_sibling(i, cpu) { |
| if (i != cpu) { |
| get_core_online(i); |
| /* |
| * Display temperature sensor data for one HT sibling |
| * per core only, so abort the loop after one such |
| * sibling has been found. |
| */ |
| break; |
| } |
| } |
| /* |
| * If all cores in this pkg are offline, remove the device. |
| * coretemp_device_remove calls unregister_platform_device, |
| * which in turn calls coretemp_remove. This removes the |
| * pkgtemp entry and does other clean ups. |
| */ |
| if (!is_any_core_online(pdata)) |
| coretemp_device_remove(cpu); |
| } |
| |
| static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb, |
| unsigned long action, void *hcpu) |
| { |
| unsigned int cpu = (unsigned long) hcpu; |
| |
| switch (action) { |
| case CPU_ONLINE: |
| case CPU_DOWN_FAILED: |
| get_core_online(cpu); |
| break; |
| case CPU_DOWN_PREPARE: |
| put_core_offline(cpu); |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block coretemp_cpu_notifier __refdata = { |
| .notifier_call = coretemp_cpu_callback, |
| }; |
| |
| static int __init coretemp_init(void) |
| { |
| int i, err = -ENODEV; |
| |
| /* quick check if we run Intel */ |
| if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL) |
| goto exit; |
| |
| err = platform_driver_register(&coretemp_driver); |
| if (err) |
| goto exit; |
| |
| for_each_online_cpu(i) |
| get_core_online(i); |
| |
| #ifndef CONFIG_HOTPLUG_CPU |
| if (list_empty(&pdev_list)) { |
| err = -ENODEV; |
| goto exit_driver_unreg; |
| } |
| #endif |
| |
| register_hotcpu_notifier(&coretemp_cpu_notifier); |
| return 0; |
| |
| #ifndef CONFIG_HOTPLUG_CPU |
| exit_driver_unreg: |
| platform_driver_unregister(&coretemp_driver); |
| #endif |
| exit: |
| return err; |
| } |
| |
| static void __exit coretemp_exit(void) |
| { |
| struct pdev_entry *p, *n; |
| |
| unregister_hotcpu_notifier(&coretemp_cpu_notifier); |
| mutex_lock(&pdev_list_mutex); |
| list_for_each_entry_safe(p, n, &pdev_list, list) { |
| platform_device_unregister(p->pdev); |
| list_del(&p->list); |
| kfree(p); |
| } |
| mutex_unlock(&pdev_list_mutex); |
| platform_driver_unregister(&coretemp_driver); |
| } |
| |
| MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>"); |
| MODULE_DESCRIPTION("Intel Core temperature monitor"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(coretemp_init) |
| module_exit(coretemp_exit) |