| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/ioport.h> |
| #include <linux/wait.h> |
| |
| #include "pci.h" |
| |
| /* |
| * This interrupt-safe spinlock protects all accesses to PCI |
| * configuration space. |
| */ |
| |
| DEFINE_RAW_SPINLOCK(pci_lock); |
| |
| /* |
| * Wrappers for all PCI configuration access functions. They just check |
| * alignment, do locking and call the low-level functions pointed to |
| * by pci_dev->ops. |
| */ |
| |
| #define PCI_byte_BAD 0 |
| #define PCI_word_BAD (pos & 1) |
| #define PCI_dword_BAD (pos & 3) |
| |
| #define PCI_OP_READ(size, type, len) \ |
| int pci_bus_read_config_##size \ |
| (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ |
| { \ |
| int res; \ |
| unsigned long flags; \ |
| u32 data = 0; \ |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ |
| raw_spin_lock_irqsave(&pci_lock, flags); \ |
| res = bus->ops->read(bus, devfn, pos, len, &data); \ |
| *value = (type)data; \ |
| raw_spin_unlock_irqrestore(&pci_lock, flags); \ |
| return res; \ |
| } |
| |
| #define PCI_OP_WRITE(size, type, len) \ |
| int pci_bus_write_config_##size \ |
| (struct pci_bus *bus, unsigned int devfn, int pos, type value) \ |
| { \ |
| int res; \ |
| unsigned long flags; \ |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ |
| raw_spin_lock_irqsave(&pci_lock, flags); \ |
| res = bus->ops->write(bus, devfn, pos, len, value); \ |
| raw_spin_unlock_irqrestore(&pci_lock, flags); \ |
| return res; \ |
| } |
| |
| PCI_OP_READ(byte, u8, 1) |
| PCI_OP_READ(word, u16, 2) |
| PCI_OP_READ(dword, u32, 4) |
| PCI_OP_WRITE(byte, u8, 1) |
| PCI_OP_WRITE(word, u16, 2) |
| PCI_OP_WRITE(dword, u32, 4) |
| |
| EXPORT_SYMBOL(pci_bus_read_config_byte); |
| EXPORT_SYMBOL(pci_bus_read_config_word); |
| EXPORT_SYMBOL(pci_bus_read_config_dword); |
| EXPORT_SYMBOL(pci_bus_write_config_byte); |
| EXPORT_SYMBOL(pci_bus_write_config_word); |
| EXPORT_SYMBOL(pci_bus_write_config_dword); |
| |
| int pci_generic_config_read(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| void __iomem *addr; |
| |
| addr = bus->ops->map_bus(bus, devfn, where); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| if (size == 1) |
| *val = readb(addr); |
| else if (size == 2) |
| *val = readw(addr); |
| else |
| *val = readl(addr); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| EXPORT_SYMBOL_GPL(pci_generic_config_read); |
| |
| int pci_generic_config_write(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| void __iomem *addr; |
| |
| addr = bus->ops->map_bus(bus, devfn, where); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (size == 1) |
| writeb(val, addr); |
| else if (size == 2) |
| writew(val, addr); |
| else |
| writel(val, addr); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| EXPORT_SYMBOL_GPL(pci_generic_config_write); |
| |
| int pci_generic_config_read32(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| void __iomem *addr; |
| |
| addr = bus->ops->map_bus(bus, devfn, where & ~0x3); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| *val = readl(addr); |
| |
| if (size <= 2) |
| *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| EXPORT_SYMBOL_GPL(pci_generic_config_read32); |
| |
| int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| void __iomem *addr; |
| u32 mask, tmp; |
| |
| addr = bus->ops->map_bus(bus, devfn, where & ~0x3); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (size == 4) { |
| writel(val, addr); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| /* |
| * In general, hardware that supports only 32-bit writes on PCI is |
| * not spec-compliant. For example, software may perform a 16-bit |
| * write. If the hardware only supports 32-bit accesses, we must |
| * do a 32-bit read, merge in the 16 bits we intend to write, |
| * followed by a 32-bit write. If the 16 bits we *don't* intend to |
| * write happen to have any RW1C (write-one-to-clear) bits set, we |
| * just inadvertently cleared something we shouldn't have. |
| */ |
| dev_warn_ratelimited(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n", |
| size, pci_domain_nr(bus), bus->number, |
| PCI_SLOT(devfn), PCI_FUNC(devfn), where); |
| |
| mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8)); |
| tmp = readl(addr) & mask; |
| tmp |= val << ((where & 0x3) * 8); |
| writel(tmp, addr); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| EXPORT_SYMBOL_GPL(pci_generic_config_write32); |
| |
| /** |
| * pci_bus_set_ops - Set raw operations of pci bus |
| * @bus: pci bus struct |
| * @ops: new raw operations |
| * |
| * Return previous raw operations |
| */ |
| struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops) |
| { |
| struct pci_ops *old_ops; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&pci_lock, flags); |
| old_ops = bus->ops; |
| bus->ops = ops; |
| raw_spin_unlock_irqrestore(&pci_lock, flags); |
| return old_ops; |
| } |
| EXPORT_SYMBOL(pci_bus_set_ops); |
| |
| /* |
| * The following routines are to prevent the user from accessing PCI config |
| * space when it's unsafe to do so. Some devices require this during BIST and |
| * we're required to prevent it during D-state transitions. |
| * |
| * We have a bit per device to indicate it's blocked and a global wait queue |
| * for callers to sleep on until devices are unblocked. |
| */ |
| static DECLARE_WAIT_QUEUE_HEAD(pci_cfg_wait); |
| |
| static noinline void pci_wait_cfg(struct pci_dev *dev) |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| |
| __add_wait_queue(&pci_cfg_wait, &wait); |
| do { |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| raw_spin_unlock_irq(&pci_lock); |
| schedule(); |
| raw_spin_lock_irq(&pci_lock); |
| } while (dev->block_cfg_access); |
| __remove_wait_queue(&pci_cfg_wait, &wait); |
| } |
| |
| /* Returns 0 on success, negative values indicate error. */ |
| #define PCI_USER_READ_CONFIG(size, type) \ |
| int pci_user_read_config_##size \ |
| (struct pci_dev *dev, int pos, type *val) \ |
| { \ |
| int ret = PCIBIOS_SUCCESSFUL; \ |
| u32 data = -1; \ |
| if (PCI_##size##_BAD) \ |
| return -EINVAL; \ |
| raw_spin_lock_irq(&pci_lock); \ |
| if (unlikely(dev->block_cfg_access)) \ |
| pci_wait_cfg(dev); \ |
| ret = dev->bus->ops->read(dev->bus, dev->devfn, \ |
| pos, sizeof(type), &data); \ |
| raw_spin_unlock_irq(&pci_lock); \ |
| *val = (type)data; \ |
| return pcibios_err_to_errno(ret); \ |
| } \ |
| EXPORT_SYMBOL_GPL(pci_user_read_config_##size); |
| |
| /* Returns 0 on success, negative values indicate error. */ |
| #define PCI_USER_WRITE_CONFIG(size, type) \ |
| int pci_user_write_config_##size \ |
| (struct pci_dev *dev, int pos, type val) \ |
| { \ |
| int ret = PCIBIOS_SUCCESSFUL; \ |
| if (PCI_##size##_BAD) \ |
| return -EINVAL; \ |
| raw_spin_lock_irq(&pci_lock); \ |
| if (unlikely(dev->block_cfg_access)) \ |
| pci_wait_cfg(dev); \ |
| ret = dev->bus->ops->write(dev->bus, dev->devfn, \ |
| pos, sizeof(type), val); \ |
| raw_spin_unlock_irq(&pci_lock); \ |
| return pcibios_err_to_errno(ret); \ |
| } \ |
| EXPORT_SYMBOL_GPL(pci_user_write_config_##size); |
| |
| PCI_USER_READ_CONFIG(byte, u8) |
| PCI_USER_READ_CONFIG(word, u16) |
| PCI_USER_READ_CONFIG(dword, u32) |
| PCI_USER_WRITE_CONFIG(byte, u8) |
| PCI_USER_WRITE_CONFIG(word, u16) |
| PCI_USER_WRITE_CONFIG(dword, u32) |
| |
| /* VPD access through PCI 2.2+ VPD capability */ |
| |
| /** |
| * pci_read_vpd - Read one entry from Vital Product Data |
| * @dev: pci device struct |
| * @pos: offset in vpd space |
| * @count: number of bytes to read |
| * @buf: pointer to where to store result |
| */ |
| ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf) |
| { |
| if (!dev->vpd || !dev->vpd->ops) |
| return -ENODEV; |
| return dev->vpd->ops->read(dev, pos, count, buf); |
| } |
| EXPORT_SYMBOL(pci_read_vpd); |
| |
| /** |
| * pci_write_vpd - Write entry to Vital Product Data |
| * @dev: pci device struct |
| * @pos: offset in vpd space |
| * @count: number of bytes to write |
| * @buf: buffer containing write data |
| */ |
| ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf) |
| { |
| if (!dev->vpd || !dev->vpd->ops) |
| return -ENODEV; |
| return dev->vpd->ops->write(dev, pos, count, buf); |
| } |
| EXPORT_SYMBOL(pci_write_vpd); |
| |
| /** |
| * pci_set_vpd_size - Set size of Vital Product Data space |
| * @dev: pci device struct |
| * @len: size of vpd space |
| */ |
| int pci_set_vpd_size(struct pci_dev *dev, size_t len) |
| { |
| if (!dev->vpd || !dev->vpd->ops) |
| return -ENODEV; |
| return dev->vpd->ops->set_size(dev, len); |
| } |
| EXPORT_SYMBOL(pci_set_vpd_size); |
| |
| #define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1) |
| |
| /** |
| * pci_vpd_size - determine actual size of Vital Product Data |
| * @dev: pci device struct |
| * @old_size: current assumed size, also maximum allowed size |
| */ |
| static size_t pci_vpd_size(struct pci_dev *dev, size_t old_size) |
| { |
| size_t off = 0; |
| unsigned char header[1+2]; /* 1 byte tag, 2 bytes length */ |
| |
| while (off < old_size && |
| pci_read_vpd(dev, off, 1, header) == 1) { |
| unsigned char tag; |
| |
| if (header[0] & PCI_VPD_LRDT) { |
| /* Large Resource Data Type Tag */ |
| tag = pci_vpd_lrdt_tag(header); |
| /* Only read length from known tag items */ |
| if ((tag == PCI_VPD_LTIN_ID_STRING) || |
| (tag == PCI_VPD_LTIN_RO_DATA) || |
| (tag == PCI_VPD_LTIN_RW_DATA)) { |
| if (pci_read_vpd(dev, off+1, 2, |
| &header[1]) != 2) { |
| dev_warn(&dev->dev, |
| "invalid large VPD tag %02x size at offset %zu", |
| tag, off + 1); |
| return 0; |
| } |
| off += PCI_VPD_LRDT_TAG_SIZE + |
| pci_vpd_lrdt_size(header); |
| } |
| } else { |
| /* Short Resource Data Type Tag */ |
| off += PCI_VPD_SRDT_TAG_SIZE + |
| pci_vpd_srdt_size(header); |
| tag = pci_vpd_srdt_tag(header); |
| } |
| |
| if (tag == PCI_VPD_STIN_END) /* End tag descriptor */ |
| return off; |
| |
| if ((tag != PCI_VPD_LTIN_ID_STRING) && |
| (tag != PCI_VPD_LTIN_RO_DATA) && |
| (tag != PCI_VPD_LTIN_RW_DATA)) { |
| dev_warn(&dev->dev, |
| "invalid %s VPD tag %02x at offset %zu", |
| (header[0] & PCI_VPD_LRDT) ? "large" : "short", |
| tag, off); |
| return 0; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * Wait for last operation to complete. |
| * This code has to spin since there is no other notification from the PCI |
| * hardware. Since the VPD is often implemented by serial attachment to an |
| * EEPROM, it may take many milliseconds to complete. |
| * |
| * Returns 0 on success, negative values indicate error. |
| */ |
| static int pci_vpd_wait(struct pci_dev *dev) |
| { |
| struct pci_vpd *vpd = dev->vpd; |
| unsigned long timeout = jiffies + msecs_to_jiffies(125); |
| unsigned long max_sleep = 16; |
| u16 status; |
| int ret; |
| |
| if (!vpd->busy) |
| return 0; |
| |
| while (time_before(jiffies, timeout)) { |
| ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR, |
| &status); |
| if (ret < 0) |
| return ret; |
| |
| if ((status & PCI_VPD_ADDR_F) == vpd->flag) { |
| vpd->busy = 0; |
| return 0; |
| } |
| |
| if (fatal_signal_pending(current)) |
| return -EINTR; |
| |
| usleep_range(10, max_sleep); |
| if (max_sleep < 1024) |
| max_sleep *= 2; |
| } |
| |
| dev_warn(&dev->dev, "VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n"); |
| return -ETIMEDOUT; |
| } |
| |
| static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count, |
| void *arg) |
| { |
| struct pci_vpd *vpd = dev->vpd; |
| int ret; |
| loff_t end = pos + count; |
| u8 *buf = arg; |
| |
| if (pos < 0) |
| return -EINVAL; |
| |
| if (!vpd->valid) { |
| vpd->valid = 1; |
| vpd->len = pci_vpd_size(dev, vpd->len); |
| } |
| |
| if (vpd->len == 0) |
| return -EIO; |
| |
| if (pos > vpd->len) |
| return 0; |
| |
| if (end > vpd->len) { |
| end = vpd->len; |
| count = end - pos; |
| } |
| |
| if (mutex_lock_killable(&vpd->lock)) |
| return -EINTR; |
| |
| ret = pci_vpd_wait(dev); |
| if (ret < 0) |
| goto out; |
| |
| while (pos < end) { |
| u32 val; |
| unsigned int i, skip; |
| |
| ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, |
| pos & ~3); |
| if (ret < 0) |
| break; |
| vpd->busy = 1; |
| vpd->flag = PCI_VPD_ADDR_F; |
| ret = pci_vpd_wait(dev); |
| if (ret < 0) |
| break; |
| |
| ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val); |
| if (ret < 0) |
| break; |
| |
| skip = pos & 3; |
| for (i = 0; i < sizeof(u32); i++) { |
| if (i >= skip) { |
| *buf++ = val; |
| if (++pos == end) |
| break; |
| } |
| val >>= 8; |
| } |
| } |
| out: |
| mutex_unlock(&vpd->lock); |
| return ret ? ret : count; |
| } |
| |
| static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count, |
| const void *arg) |
| { |
| struct pci_vpd *vpd = dev->vpd; |
| const u8 *buf = arg; |
| loff_t end = pos + count; |
| int ret = 0; |
| |
| if (pos < 0 || (pos & 3) || (count & 3)) |
| return -EINVAL; |
| |
| if (!vpd->valid) { |
| vpd->valid = 1; |
| vpd->len = pci_vpd_size(dev, vpd->len); |
| } |
| |
| if (vpd->len == 0) |
| return -EIO; |
| |
| if (end > vpd->len) |
| return -EINVAL; |
| |
| if (mutex_lock_killable(&vpd->lock)) |
| return -EINTR; |
| |
| ret = pci_vpd_wait(dev); |
| if (ret < 0) |
| goto out; |
| |
| while (pos < end) { |
| u32 val; |
| |
| val = *buf++; |
| val |= *buf++ << 8; |
| val |= *buf++ << 16; |
| val |= *buf++ << 24; |
| |
| ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val); |
| if (ret < 0) |
| break; |
| ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, |
| pos | PCI_VPD_ADDR_F); |
| if (ret < 0) |
| break; |
| |
| vpd->busy = 1; |
| vpd->flag = 0; |
| ret = pci_vpd_wait(dev); |
| if (ret < 0) |
| break; |
| |
| pos += sizeof(u32); |
| } |
| out: |
| mutex_unlock(&vpd->lock); |
| return ret ? ret : count; |
| } |
| |
| static int pci_vpd_set_size(struct pci_dev *dev, size_t len) |
| { |
| struct pci_vpd *vpd = dev->vpd; |
| |
| if (len == 0 || len > PCI_VPD_MAX_SIZE) |
| return -EIO; |
| |
| vpd->valid = 1; |
| vpd->len = len; |
| |
| return 0; |
| } |
| |
| static const struct pci_vpd_ops pci_vpd_ops = { |
| .read = pci_vpd_read, |
| .write = pci_vpd_write, |
| .set_size = pci_vpd_set_size, |
| }; |
| |
| static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count, |
| void *arg) |
| { |
| struct pci_dev *tdev = pci_get_slot(dev->bus, |
| PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); |
| ssize_t ret; |
| |
| if (!tdev) |
| return -ENODEV; |
| |
| ret = pci_read_vpd(tdev, pos, count, arg); |
| pci_dev_put(tdev); |
| return ret; |
| } |
| |
| static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count, |
| const void *arg) |
| { |
| struct pci_dev *tdev = pci_get_slot(dev->bus, |
| PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); |
| ssize_t ret; |
| |
| if (!tdev) |
| return -ENODEV; |
| |
| ret = pci_write_vpd(tdev, pos, count, arg); |
| pci_dev_put(tdev); |
| return ret; |
| } |
| |
| static int pci_vpd_f0_set_size(struct pci_dev *dev, size_t len) |
| { |
| struct pci_dev *tdev = pci_get_slot(dev->bus, |
| PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); |
| int ret; |
| |
| if (!tdev) |
| return -ENODEV; |
| |
| ret = pci_set_vpd_size(tdev, len); |
| pci_dev_put(tdev); |
| return ret; |
| } |
| |
| static const struct pci_vpd_ops pci_vpd_f0_ops = { |
| .read = pci_vpd_f0_read, |
| .write = pci_vpd_f0_write, |
| .set_size = pci_vpd_f0_set_size, |
| }; |
| |
| int pci_vpd_init(struct pci_dev *dev) |
| { |
| struct pci_vpd *vpd; |
| u8 cap; |
| |
| cap = pci_find_capability(dev, PCI_CAP_ID_VPD); |
| if (!cap) |
| return -ENODEV; |
| |
| vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC); |
| if (!vpd) |
| return -ENOMEM; |
| |
| vpd->len = PCI_VPD_MAX_SIZE; |
| if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0) |
| vpd->ops = &pci_vpd_f0_ops; |
| else |
| vpd->ops = &pci_vpd_ops; |
| mutex_init(&vpd->lock); |
| vpd->cap = cap; |
| vpd->busy = 0; |
| vpd->valid = 0; |
| dev->vpd = vpd; |
| return 0; |
| } |
| |
| void pci_vpd_release(struct pci_dev *dev) |
| { |
| kfree(dev->vpd); |
| } |
| |
| /** |
| * pci_cfg_access_lock - Lock PCI config reads/writes |
| * @dev: pci device struct |
| * |
| * When access is locked, any userspace reads or writes to config |
| * space and concurrent lock requests will sleep until access is |
| * allowed via pci_cfg_access_unlocked again. |
| */ |
| void pci_cfg_access_lock(struct pci_dev *dev) |
| { |
| might_sleep(); |
| |
| raw_spin_lock_irq(&pci_lock); |
| if (dev->block_cfg_access) |
| pci_wait_cfg(dev); |
| dev->block_cfg_access = 1; |
| raw_spin_unlock_irq(&pci_lock); |
| } |
| EXPORT_SYMBOL_GPL(pci_cfg_access_lock); |
| |
| /** |
| * pci_cfg_access_trylock - try to lock PCI config reads/writes |
| * @dev: pci device struct |
| * |
| * Same as pci_cfg_access_lock, but will return 0 if access is |
| * already locked, 1 otherwise. This function can be used from |
| * atomic contexts. |
| */ |
| bool pci_cfg_access_trylock(struct pci_dev *dev) |
| { |
| unsigned long flags; |
| bool locked = true; |
| |
| raw_spin_lock_irqsave(&pci_lock, flags); |
| if (dev->block_cfg_access) |
| locked = false; |
| else |
| dev->block_cfg_access = 1; |
| raw_spin_unlock_irqrestore(&pci_lock, flags); |
| |
| return locked; |
| } |
| EXPORT_SYMBOL_GPL(pci_cfg_access_trylock); |
| |
| /** |
| * pci_cfg_access_unlock - Unlock PCI config reads/writes |
| * @dev: pci device struct |
| * |
| * This function allows PCI config accesses to resume. |
| */ |
| void pci_cfg_access_unlock(struct pci_dev *dev) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&pci_lock, flags); |
| |
| /* This indicates a problem in the caller, but we don't need |
| * to kill them, unlike a double-block above. */ |
| WARN_ON(!dev->block_cfg_access); |
| |
| dev->block_cfg_access = 0; |
| wake_up_all(&pci_cfg_wait); |
| raw_spin_unlock_irqrestore(&pci_lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(pci_cfg_access_unlock); |
| |
| static inline int pcie_cap_version(const struct pci_dev *dev) |
| { |
| return pcie_caps_reg(dev) & PCI_EXP_FLAGS_VERS; |
| } |
| |
| static bool pcie_downstream_port(const struct pci_dev *dev) |
| { |
| int type = pci_pcie_type(dev); |
| |
| return type == PCI_EXP_TYPE_ROOT_PORT || |
| type == PCI_EXP_TYPE_DOWNSTREAM; |
| } |
| |
| bool pcie_cap_has_lnkctl(const struct pci_dev *dev) |
| { |
| int type = pci_pcie_type(dev); |
| |
| return type == PCI_EXP_TYPE_ENDPOINT || |
| type == PCI_EXP_TYPE_LEG_END || |
| type == PCI_EXP_TYPE_ROOT_PORT || |
| type == PCI_EXP_TYPE_UPSTREAM || |
| type == PCI_EXP_TYPE_DOWNSTREAM || |
| type == PCI_EXP_TYPE_PCI_BRIDGE || |
| type == PCI_EXP_TYPE_PCIE_BRIDGE; |
| } |
| |
| static inline bool pcie_cap_has_sltctl(const struct pci_dev *dev) |
| { |
| return pcie_downstream_port(dev) && |
| pcie_caps_reg(dev) & PCI_EXP_FLAGS_SLOT; |
| } |
| |
| static inline bool pcie_cap_has_rtctl(const struct pci_dev *dev) |
| { |
| int type = pci_pcie_type(dev); |
| |
| return type == PCI_EXP_TYPE_ROOT_PORT || |
| type == PCI_EXP_TYPE_RC_EC; |
| } |
| |
| static bool pcie_capability_reg_implemented(struct pci_dev *dev, int pos) |
| { |
| if (!pci_is_pcie(dev)) |
| return false; |
| |
| switch (pos) { |
| case PCI_EXP_FLAGS: |
| return true; |
| case PCI_EXP_DEVCAP: |
| case PCI_EXP_DEVCTL: |
| case PCI_EXP_DEVSTA: |
| return true; |
| case PCI_EXP_LNKCAP: |
| case PCI_EXP_LNKCTL: |
| case PCI_EXP_LNKSTA: |
| return pcie_cap_has_lnkctl(dev); |
| case PCI_EXP_SLTCAP: |
| case PCI_EXP_SLTCTL: |
| case PCI_EXP_SLTSTA: |
| return pcie_cap_has_sltctl(dev); |
| case PCI_EXP_RTCTL: |
| case PCI_EXP_RTCAP: |
| case PCI_EXP_RTSTA: |
| return pcie_cap_has_rtctl(dev); |
| case PCI_EXP_DEVCAP2: |
| case PCI_EXP_DEVCTL2: |
| case PCI_EXP_LNKCAP2: |
| case PCI_EXP_LNKCTL2: |
| case PCI_EXP_LNKSTA2: |
| return pcie_cap_version(dev) > 1; |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * Note that these accessor functions are only for the "PCI Express |
| * Capability" (see PCIe spec r3.0, sec 7.8). They do not apply to the |
| * other "PCI Express Extended Capabilities" (AER, VC, ACS, MFVC, etc.) |
| */ |
| int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val) |
| { |
| int ret; |
| |
| *val = 0; |
| if (pos & 1) |
| return -EINVAL; |
| |
| if (pcie_capability_reg_implemented(dev, pos)) { |
| ret = pci_read_config_word(dev, pci_pcie_cap(dev) + pos, val); |
| /* |
| * Reset *val to 0 if pci_read_config_word() fails, it may |
| * have been written as 0xFFFF if hardware error happens |
| * during pci_read_config_word(). |
| */ |
| if (ret) |
| *val = 0; |
| return ret; |
| } |
| |
| /* |
| * For Functions that do not implement the Slot Capabilities, |
| * Slot Status, and Slot Control registers, these spaces must |
| * be hardwired to 0b, with the exception of the Presence Detect |
| * State bit in the Slot Status register of Downstream Ports, |
| * which must be hardwired to 1b. (PCIe Base Spec 3.0, sec 7.8) |
| */ |
| if (pci_is_pcie(dev) && pcie_downstream_port(dev) && |
| pos == PCI_EXP_SLTSTA) |
| *val = PCI_EXP_SLTSTA_PDS; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pcie_capability_read_word); |
| |
| int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val) |
| { |
| int ret; |
| |
| *val = 0; |
| if (pos & 3) |
| return -EINVAL; |
| |
| if (pcie_capability_reg_implemented(dev, pos)) { |
| ret = pci_read_config_dword(dev, pci_pcie_cap(dev) + pos, val); |
| /* |
| * Reset *val to 0 if pci_read_config_dword() fails, it may |
| * have been written as 0xFFFFFFFF if hardware error happens |
| * during pci_read_config_dword(). |
| */ |
| if (ret) |
| *val = 0; |
| return ret; |
| } |
| |
| if (pci_is_pcie(dev) && pcie_downstream_port(dev) && |
| pos == PCI_EXP_SLTSTA) |
| *val = PCI_EXP_SLTSTA_PDS; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pcie_capability_read_dword); |
| |
| int pcie_capability_write_word(struct pci_dev *dev, int pos, u16 val) |
| { |
| if (pos & 1) |
| return -EINVAL; |
| |
| if (!pcie_capability_reg_implemented(dev, pos)) |
| return 0; |
| |
| return pci_write_config_word(dev, pci_pcie_cap(dev) + pos, val); |
| } |
| EXPORT_SYMBOL(pcie_capability_write_word); |
| |
| int pcie_capability_write_dword(struct pci_dev *dev, int pos, u32 val) |
| { |
| if (pos & 3) |
| return -EINVAL; |
| |
| if (!pcie_capability_reg_implemented(dev, pos)) |
| return 0; |
| |
| return pci_write_config_dword(dev, pci_pcie_cap(dev) + pos, val); |
| } |
| EXPORT_SYMBOL(pcie_capability_write_dword); |
| |
| int pcie_capability_clear_and_set_word(struct pci_dev *dev, int pos, |
| u16 clear, u16 set) |
| { |
| int ret; |
| u16 val; |
| |
| ret = pcie_capability_read_word(dev, pos, &val); |
| if (!ret) { |
| val &= ~clear; |
| val |= set; |
| ret = pcie_capability_write_word(dev, pos, val); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pcie_capability_clear_and_set_word); |
| |
| int pcie_capability_clear_and_set_dword(struct pci_dev *dev, int pos, |
| u32 clear, u32 set) |
| { |
| int ret; |
| u32 val; |
| |
| ret = pcie_capability_read_dword(dev, pos, &val); |
| if (!ret) { |
| val &= ~clear; |
| val |= set; |
| ret = pcie_capability_write_dword(dev, pos, val); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pcie_capability_clear_and_set_dword); |