| /* |
| * xHCI host controller driver |
| * |
| * Copyright (C) 2008 Intel Corp. |
| * |
| * Author: Sarah Sharp |
| * Some code borrowed from the Linux EHCI driver. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| /* Up to 16 ms to halt an HC */ |
| #define XHCI_MAX_HALT_USEC (16*1000) |
| /* HC not running - set to 1 when run/stop bit is cleared. */ |
| #define XHCI_STS_HALT (1<<0) |
| |
| /* HCCPARAMS offset from PCI base address */ |
| #define XHCI_HCC_PARAMS_OFFSET 0x10 |
| /* HCCPARAMS contains the first extended capability pointer */ |
| #define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff) |
| |
| /* Command and Status registers offset from the Operational Registers address */ |
| #define XHCI_CMD_OFFSET 0x00 |
| #define XHCI_STS_OFFSET 0x04 |
| |
| #define XHCI_MAX_EXT_CAPS 50 |
| |
| /* Capability Register */ |
| /* bits 7:0 - how long is the Capabilities register */ |
| #define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff) |
| |
| /* Extended capability register fields */ |
| #define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff) |
| #define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff) |
| #define XHCI_EXT_CAPS_VAL(p) ((p)>>16) |
| /* Extended capability IDs - ID 0 reserved */ |
| #define XHCI_EXT_CAPS_LEGACY 1 |
| #define XHCI_EXT_CAPS_PROTOCOL 2 |
| #define XHCI_EXT_CAPS_PM 3 |
| #define XHCI_EXT_CAPS_VIRT 4 |
| #define XHCI_EXT_CAPS_ROUTE 5 |
| /* IDs 6-9 reserved */ |
| #define XHCI_EXT_CAPS_DEBUG 10 |
| /* USB Legacy Support Capability - section 7.1.1 */ |
| #define XHCI_HC_BIOS_OWNED (1 << 16) |
| #define XHCI_HC_OS_OWNED (1 << 24) |
| |
| /* USB Legacy Support Capability - section 7.1.1 */ |
| /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ |
| #define XHCI_LEGACY_SUPPORT_OFFSET (0x00) |
| |
| /* USB Legacy Support Control and Status Register - section 7.1.2 */ |
| /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ |
| #define XHCI_LEGACY_CONTROL_OFFSET (0x04) |
| /* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ |
| #define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17)) |
| |
| /* command register values to disable interrupts and halt the HC */ |
| /* start/stop HC execution - do not write unless HC is halted*/ |
| #define XHCI_CMD_RUN (1 << 0) |
| /* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */ |
| #define XHCI_CMD_EIE (1 << 2) |
| /* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */ |
| #define XHCI_CMD_HSEIE (1 << 3) |
| /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */ |
| #define XHCI_CMD_EWE (1 << 10) |
| |
| #define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE) |
| |
| /* true: Controller Not Ready to accept doorbell or op reg writes after reset */ |
| #define XHCI_STS_CNR (1 << 11) |
| |
| #include <linux/io.h> |
| |
| /** |
| * Return the next extended capability pointer register. |
| * |
| * @base PCI register base address. |
| * |
| * @ext_offset Offset of the 32-bit register that contains the extended |
| * capabilites pointer. If searching for the first extended capability, pass |
| * in XHCI_HCC_PARAMS_OFFSET. If searching for the next extended capability, |
| * pass in the offset of the current extended capability register. |
| * |
| * Returns 0 if there is no next extended capability register or returns the register offset |
| * from the PCI registers base address. |
| */ |
| static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset) |
| { |
| u32 next; |
| |
| next = readl(base + ext_offset); |
| |
| if (ext_offset == XHCI_HCC_PARAMS_OFFSET) { |
| /* Find the first extended capability */ |
| next = XHCI_HCC_EXT_CAPS(next); |
| ext_offset = 0; |
| } else { |
| /* Find the next extended capability */ |
| next = XHCI_EXT_CAPS_NEXT(next); |
| } |
| |
| if (!next) |
| return 0; |
| /* |
| * Address calculation from offset of extended capabilities |
| * (or HCCPARAMS) register - see section 5.3.6 and section 7. |
| */ |
| return ext_offset + (next << 2); |
| } |
| |
| /** |
| * Find the offset of the extended capabilities with capability ID id. |
| * |
| * @base PCI MMIO registers base address. |
| * @ext_offset Offset from base of the first extended capability to look at, |
| * or the address of HCCPARAMS. |
| * @id Extended capability ID to search for. |
| * |
| * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities |
| * to make sure that the list doesn't contain a loop. |
| */ |
| static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id) |
| { |
| u32 val; |
| int limit = XHCI_MAX_EXT_CAPS; |
| |
| while (ext_offset && limit > 0) { |
| val = readl(base + ext_offset); |
| if (XHCI_EXT_CAPS_ID(val) == id) |
| break; |
| ext_offset = xhci_find_next_cap_offset(base, ext_offset); |
| limit--; |
| } |
| if (limit > 0) |
| return ext_offset; |
| return 0; |
| } |