| /* |
| * Maple (970 eval board) setup code |
| * |
| * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), |
| * IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/user.h> |
| #include <linux/tty.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/ioport.h> |
| #include <linux/major.h> |
| #include <linux/initrd.h> |
| #include <linux/vt_kern.h> |
| #include <linux/console.h> |
| #include <linux/pci.h> |
| #include <linux/adb.h> |
| #include <linux/cuda.h> |
| #include <linux/pmu.h> |
| #include <linux/irq.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| #include <linux/serial.h> |
| #include <linux/smp.h> |
| #include <linux/bitops.h> |
| #include <linux/of_device.h> |
| #include <linux/lmb.h> |
| |
| #include <asm/processor.h> |
| #include <asm/sections.h> |
| #include <asm/prom.h> |
| #include <asm/system.h> |
| #include <asm/pgtable.h> |
| #include <asm/io.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/iommu.h> |
| #include <asm/machdep.h> |
| #include <asm/dma.h> |
| #include <asm/cputable.h> |
| #include <asm/time.h> |
| #include <asm/mpic.h> |
| #include <asm/rtas.h> |
| #include <asm/udbg.h> |
| #include <asm/nvram.h> |
| |
| #include "maple.h" |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| static unsigned long maple_find_nvram_base(void) |
| { |
| struct device_node *rtcs; |
| unsigned long result = 0; |
| |
| /* find NVRAM device */ |
| rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111"); |
| if (rtcs) { |
| struct resource r; |
| if (of_address_to_resource(rtcs, 0, &r)) { |
| printk(KERN_EMERG "Maple: Unable to translate NVRAM" |
| " address\n"); |
| goto bail; |
| } |
| if (!(r.flags & IORESOURCE_IO)) { |
| printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n"); |
| goto bail; |
| } |
| result = r.start; |
| } else |
| printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); |
| bail: |
| of_node_put(rtcs); |
| return result; |
| } |
| |
| static void maple_restart(char *cmd) |
| { |
| unsigned int maple_nvram_base; |
| const unsigned int *maple_nvram_offset, *maple_nvram_command; |
| struct device_node *sp; |
| |
| maple_nvram_base = maple_find_nvram_base(); |
| if (maple_nvram_base == 0) |
| goto fail; |
| |
| /* find service processor device */ |
| sp = of_find_node_by_name(NULL, "service-processor"); |
| if (!sp) { |
| printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); |
| goto fail; |
| } |
| maple_nvram_offset = of_get_property(sp, "restart-addr", NULL); |
| maple_nvram_command = of_get_property(sp, "restart-value", NULL); |
| of_node_put(sp); |
| |
| /* send command */ |
| outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset); |
| for (;;) ; |
| fail: |
| printk(KERN_EMERG "Maple: Manual Restart Required\n"); |
| } |
| |
| static void maple_power_off(void) |
| { |
| unsigned int maple_nvram_base; |
| const unsigned int *maple_nvram_offset, *maple_nvram_command; |
| struct device_node *sp; |
| |
| maple_nvram_base = maple_find_nvram_base(); |
| if (maple_nvram_base == 0) |
| goto fail; |
| |
| /* find service processor device */ |
| sp = of_find_node_by_name(NULL, "service-processor"); |
| if (!sp) { |
| printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); |
| goto fail; |
| } |
| maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL); |
| maple_nvram_command = of_get_property(sp, "power-off-value", NULL); |
| of_node_put(sp); |
| |
| /* send command */ |
| outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset); |
| for (;;) ; |
| fail: |
| printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); |
| } |
| |
| static void maple_halt(void) |
| { |
| maple_power_off(); |
| } |
| |
| #ifdef CONFIG_SMP |
| struct smp_ops_t maple_smp_ops = { |
| .probe = smp_mpic_probe, |
| .message_pass = smp_mpic_message_pass, |
| .kick_cpu = smp_generic_kick_cpu, |
| .setup_cpu = smp_mpic_setup_cpu, |
| .give_timebase = smp_generic_give_timebase, |
| .take_timebase = smp_generic_take_timebase, |
| }; |
| #endif /* CONFIG_SMP */ |
| |
| static void __init maple_use_rtas_reboot_and_halt_if_present(void) |
| { |
| if (rtas_service_present("system-reboot") && |
| rtas_service_present("power-off")) { |
| ppc_md.restart = rtas_restart; |
| ppc_md.power_off = rtas_power_off; |
| ppc_md.halt = rtas_halt; |
| } |
| } |
| |
| void __init maple_setup_arch(void) |
| { |
| /* init to some ~sane value until calibrate_delay() runs */ |
| loops_per_jiffy = 50000000; |
| |
| /* Setup SMP callback */ |
| #ifdef CONFIG_SMP |
| smp_ops = &maple_smp_ops; |
| #endif |
| /* Lookup PCI hosts */ |
| maple_pci_init(); |
| |
| #ifdef CONFIG_DUMMY_CONSOLE |
| conswitchp = &dummy_con; |
| #endif |
| maple_use_rtas_reboot_and_halt_if_present(); |
| |
| printk(KERN_DEBUG "Using native/NAP idle loop\n"); |
| |
| mmio_nvram_init(); |
| } |
| |
| /* |
| * Early initialization. |
| */ |
| static void __init maple_init_early(void) |
| { |
| DBG(" -> maple_init_early\n"); |
| |
| iommu_init_early_dart(); |
| |
| DBG(" <- maple_init_early\n"); |
| } |
| |
| /* |
| * This is almost identical to pSeries and CHRP. We need to make that |
| * code generic at one point, with appropriate bits in the device-tree to |
| * identify the presence of an HT APIC |
| */ |
| static void __init maple_init_IRQ(void) |
| { |
| struct device_node *root, *np, *mpic_node = NULL; |
| const unsigned int *opprop; |
| unsigned long openpic_addr = 0; |
| int naddr, n, i, opplen, has_isus = 0; |
| struct mpic *mpic; |
| unsigned int flags = MPIC_PRIMARY; |
| |
| /* Locate MPIC in the device-tree. Note that there is a bug |
| * in Maple device-tree where the type of the controller is |
| * open-pic and not interrupt-controller |
| */ |
| |
| for_each_node_by_type(np, "interrupt-controller") |
| if (of_device_is_compatible(np, "open-pic")) { |
| mpic_node = np; |
| break; |
| } |
| if (mpic_node == NULL) |
| for_each_node_by_type(np, "open-pic") { |
| mpic_node = np; |
| break; |
| } |
| if (mpic_node == NULL) { |
| printk(KERN_ERR |
| "Failed to locate the MPIC interrupt controller\n"); |
| return; |
| } |
| |
| /* Find address list in /platform-open-pic */ |
| root = of_find_node_by_path("/"); |
| naddr = of_n_addr_cells(root); |
| opprop = of_get_property(root, "platform-open-pic", &opplen); |
| if (opprop != 0) { |
| openpic_addr = of_read_number(opprop, naddr); |
| has_isus = (opplen > naddr); |
| printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n", |
| openpic_addr, has_isus); |
| } |
| |
| BUG_ON(openpic_addr == 0); |
| |
| /* Check for a big endian MPIC */ |
| if (of_get_property(np, "big-endian", NULL) != NULL) |
| flags |= MPIC_BIG_ENDIAN; |
| |
| /* XXX Maple specific bits */ |
| flags |= MPIC_U3_HT_IRQS | MPIC_WANTS_RESET; |
| /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */ |
| flags |= MPIC_BIG_ENDIAN; |
| |
| /* Setup the openpic driver. More device-tree junks, we hard code no |
| * ISUs for now. I'll have to revisit some stuffs with the folks doing |
| * the firmware for those |
| */ |
| mpic = mpic_alloc(mpic_node, openpic_addr, flags, |
| /*has_isus ? 16 :*/ 0, 0, " MPIC "); |
| BUG_ON(mpic == NULL); |
| |
| /* Add ISUs */ |
| opplen /= sizeof(u32); |
| for (n = 0, i = naddr; i < opplen; i += naddr, n++) { |
| unsigned long isuaddr = of_read_number(opprop + i, naddr); |
| mpic_assign_isu(mpic, n, isuaddr); |
| } |
| |
| /* All ISUs are setup, complete initialization */ |
| mpic_init(mpic); |
| ppc_md.get_irq = mpic_get_irq; |
| of_node_put(mpic_node); |
| of_node_put(root); |
| } |
| |
| static void __init maple_progress(char *s, unsigned short hex) |
| { |
| printk("*** %04x : %s\n", hex, s ? s : ""); |
| } |
| |
| |
| /* |
| * Called very early, MMU is off, device-tree isn't unflattened |
| */ |
| static int __init maple_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| if (!of_flat_dt_is_compatible(root, "Momentum,Maple") && |
| !of_flat_dt_is_compatible(root, "Momentum,Apache")) |
| return 0; |
| /* |
| * On U3, the DART (iommu) must be allocated now since it |
| * has an impact on htab_initialize (due to the large page it |
| * occupies having to be broken up so the DART itself is not |
| * part of the cacheable linar mapping |
| */ |
| alloc_dart_table(); |
| |
| hpte_init_native(); |
| |
| return 1; |
| } |
| |
| define_machine(maple) { |
| .name = "Maple", |
| .probe = maple_probe, |
| .setup_arch = maple_setup_arch, |
| .init_early = maple_init_early, |
| .init_IRQ = maple_init_IRQ, |
| .pci_irq_fixup = maple_pci_irq_fixup, |
| .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, |
| .restart = maple_restart, |
| .power_off = maple_power_off, |
| .halt = maple_halt, |
| .get_boot_time = maple_get_boot_time, |
| .set_rtc_time = maple_set_rtc_time, |
| .get_rtc_time = maple_get_rtc_time, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = maple_progress, |
| .power_save = power4_idle, |
| }; |