| /* |
| * This file is part of the Chelsio T4 Ethernet driver for Linux. |
| * |
| * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/bitmap.h> |
| #include <linux/crc32.h> |
| #include <linux/ctype.h> |
| #include <linux/debugfs.h> |
| #include <linux/err.h> |
| #include <linux/etherdevice.h> |
| #include <linux/firmware.h> |
| #include <linux/if.h> |
| #include <linux/if_vlan.h> |
| #include <linux/init.h> |
| #include <linux/log2.h> |
| #include <linux/mdio.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/mutex.h> |
| #include <linux/netdevice.h> |
| #include <linux/pci.h> |
| #include <linux/aer.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/sched.h> |
| #include <linux/seq_file.h> |
| #include <linux/sockios.h> |
| #include <linux/vmalloc.h> |
| #include <linux/workqueue.h> |
| #include <net/neighbour.h> |
| #include <net/netevent.h> |
| #include <asm/uaccess.h> |
| |
| #include "cxgb4.h" |
| #include "t4_regs.h" |
| #include "t4_msg.h" |
| #include "t4fw_api.h" |
| #include "l2t.h" |
| |
| #define DRV_VERSION "1.3.0-ko" |
| #define DRV_DESC "Chelsio T4 Network Driver" |
| |
| /* |
| * Max interrupt hold-off timer value in us. Queues fall back to this value |
| * under extreme memory pressure so it's largish to give the system time to |
| * recover. |
| */ |
| #define MAX_SGE_TIMERVAL 200U |
| |
| #ifdef CONFIG_PCI_IOV |
| /* |
| * Virtual Function provisioning constants. We need two extra Ingress Queues |
| * with Interrupt capability to serve as the VF's Firmware Event Queue and |
| * Forwarded Interrupt Queue (when using MSI mode) -- neither will have Free |
| * Lists associated with them). For each Ethernet/Control Egress Queue and |
| * for each Free List, we need an Egress Context. |
| */ |
| enum { |
| VFRES_NPORTS = 1, /* # of "ports" per VF */ |
| VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */ |
| |
| VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */ |
| VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */ |
| VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */ |
| VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ |
| VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */ |
| VFRES_TC = 0, /* PCI-E traffic class */ |
| VFRES_NEXACTF = 16, /* # of exact MPS filters */ |
| |
| VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT, |
| VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF, |
| }; |
| |
| /* |
| * Provide a Port Access Rights Mask for the specified PF/VF. This is very |
| * static and likely not to be useful in the long run. We really need to |
| * implement some form of persistent configuration which the firmware |
| * controls. |
| */ |
| static unsigned int pfvfres_pmask(struct adapter *adapter, |
| unsigned int pf, unsigned int vf) |
| { |
| unsigned int portn, portvec; |
| |
| /* |
| * Give PF's access to all of the ports. |
| */ |
| if (vf == 0) |
| return FW_PFVF_CMD_PMASK_MASK; |
| |
| /* |
| * For VFs, we'll assign them access to the ports based purely on the |
| * PF. We assign active ports in order, wrapping around if there are |
| * fewer active ports than PFs: e.g. active port[pf % nports]. |
| * Unfortunately the adapter's port_info structs haven't been |
| * initialized yet so we have to compute this. |
| */ |
| if (adapter->params.nports == 0) |
| return 0; |
| |
| portn = pf % adapter->params.nports; |
| portvec = adapter->params.portvec; |
| for (;;) { |
| /* |
| * Isolate the lowest set bit in the port vector. If we're at |
| * the port number that we want, return that as the pmask. |
| * otherwise mask that bit out of the port vector and |
| * decrement our port number ... |
| */ |
| unsigned int pmask = portvec ^ (portvec & (portvec-1)); |
| if (portn == 0) |
| return pmask; |
| portn--; |
| portvec &= ~pmask; |
| } |
| /*NOTREACHED*/ |
| } |
| #endif |
| |
| enum { |
| MEMWIN0_APERTURE = 65536, |
| MEMWIN0_BASE = 0x30000, |
| MEMWIN1_APERTURE = 32768, |
| MEMWIN1_BASE = 0x28000, |
| MEMWIN2_APERTURE = 2048, |
| MEMWIN2_BASE = 0x1b800, |
| }; |
| |
| enum { |
| MAX_TXQ_ENTRIES = 16384, |
| MAX_CTRL_TXQ_ENTRIES = 1024, |
| MAX_RSPQ_ENTRIES = 16384, |
| MAX_RX_BUFFERS = 16384, |
| MIN_TXQ_ENTRIES = 32, |
| MIN_CTRL_TXQ_ENTRIES = 32, |
| MIN_RSPQ_ENTRIES = 128, |
| MIN_FL_ENTRIES = 16 |
| }; |
| |
| #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ |
| NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ |
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) |
| |
| #define CH_DEVICE(devid, data) { PCI_VDEVICE(CHELSIO, devid), (data) } |
| |
| static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { |
| CH_DEVICE(0xa000, 0), /* PE10K */ |
| CH_DEVICE(0x4001, -1), |
| CH_DEVICE(0x4002, -1), |
| CH_DEVICE(0x4003, -1), |
| CH_DEVICE(0x4004, -1), |
| CH_DEVICE(0x4005, -1), |
| CH_DEVICE(0x4006, -1), |
| CH_DEVICE(0x4007, -1), |
| CH_DEVICE(0x4008, -1), |
| CH_DEVICE(0x4009, -1), |
| CH_DEVICE(0x400a, -1), |
| CH_DEVICE(0x4401, 4), |
| CH_DEVICE(0x4402, 4), |
| CH_DEVICE(0x4403, 4), |
| CH_DEVICE(0x4404, 4), |
| CH_DEVICE(0x4405, 4), |
| CH_DEVICE(0x4406, 4), |
| CH_DEVICE(0x4407, 4), |
| CH_DEVICE(0x4408, 4), |
| CH_DEVICE(0x4409, 4), |
| CH_DEVICE(0x440a, 4), |
| { 0, } |
| }; |
| |
| #define FW_FNAME "cxgb4/t4fw.bin" |
| |
| MODULE_DESCRIPTION(DRV_DESC); |
| MODULE_AUTHOR("Chelsio Communications"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl); |
| MODULE_FIRMWARE(FW_FNAME); |
| |
| static int dflt_msg_enable = DFLT_MSG_ENABLE; |
| |
| module_param(dflt_msg_enable, int, 0644); |
| MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T4 default message enable bitmap"); |
| |
| /* |
| * The driver uses the best interrupt scheme available on a platform in the |
| * order MSI-X, MSI, legacy INTx interrupts. This parameter determines which |
| * of these schemes the driver may consider as follows: |
| * |
| * msi = 2: choose from among all three options |
| * msi = 1: only consider MSI and INTx interrupts |
| * msi = 0: force INTx interrupts |
| */ |
| static int msi = 2; |
| |
| module_param(msi, int, 0644); |
| MODULE_PARM_DESC(msi, "whether to use INTx (0), MSI (1) or MSI-X (2)"); |
| |
| /* |
| * Queue interrupt hold-off timer values. Queues default to the first of these |
| * upon creation. |
| */ |
| static unsigned int intr_holdoff[SGE_NTIMERS - 1] = { 5, 10, 20, 50, 100 }; |
| |
| module_param_array(intr_holdoff, uint, NULL, 0644); |
| MODULE_PARM_DESC(intr_holdoff, "values for queue interrupt hold-off timers " |
| "0..4 in microseconds"); |
| |
| static unsigned int intr_cnt[SGE_NCOUNTERS - 1] = { 4, 8, 16 }; |
| |
| module_param_array(intr_cnt, uint, NULL, 0644); |
| MODULE_PARM_DESC(intr_cnt, |
| "thresholds 1..3 for queue interrupt packet counters"); |
| |
| static bool vf_acls; |
| |
| #ifdef CONFIG_PCI_IOV |
| module_param(vf_acls, bool, 0644); |
| MODULE_PARM_DESC(vf_acls, "if set enable virtualization L2 ACL enforcement"); |
| |
| static unsigned int num_vf[4]; |
| |
| module_param_array(num_vf, uint, NULL, 0644); |
| MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3"); |
| #endif |
| |
| static struct dentry *cxgb4_debugfs_root; |
| |
| static LIST_HEAD(adapter_list); |
| static DEFINE_MUTEX(uld_mutex); |
| static struct cxgb4_uld_info ulds[CXGB4_ULD_MAX]; |
| static const char *uld_str[] = { "RDMA", "iSCSI" }; |
| |
| static void link_report(struct net_device *dev) |
| { |
| if (!netif_carrier_ok(dev)) |
| netdev_info(dev, "link down\n"); |
| else { |
| static const char *fc[] = { "no", "Rx", "Tx", "Tx/Rx" }; |
| |
| const char *s = "10Mbps"; |
| const struct port_info *p = netdev_priv(dev); |
| |
| switch (p->link_cfg.speed) { |
| case SPEED_10000: |
| s = "10Gbps"; |
| break; |
| case SPEED_1000: |
| s = "1000Mbps"; |
| break; |
| case SPEED_100: |
| s = "100Mbps"; |
| break; |
| } |
| |
| netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s, |
| fc[p->link_cfg.fc]); |
| } |
| } |
| |
| void t4_os_link_changed(struct adapter *adapter, int port_id, int link_stat) |
| { |
| struct net_device *dev = adapter->port[port_id]; |
| |
| /* Skip changes from disabled ports. */ |
| if (netif_running(dev) && link_stat != netif_carrier_ok(dev)) { |
| if (link_stat) |
| netif_carrier_on(dev); |
| else |
| netif_carrier_off(dev); |
| |
| link_report(dev); |
| } |
| } |
| |
| void t4_os_portmod_changed(const struct adapter *adap, int port_id) |
| { |
| static const char *mod_str[] = { |
| NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM" |
| }; |
| |
| const struct net_device *dev = adap->port[port_id]; |
| const struct port_info *pi = netdev_priv(dev); |
| |
| if (pi->mod_type == FW_PORT_MOD_TYPE_NONE) |
| netdev_info(dev, "port module unplugged\n"); |
| else if (pi->mod_type < ARRAY_SIZE(mod_str)) |
| netdev_info(dev, "%s module inserted\n", mod_str[pi->mod_type]); |
| } |
| |
| /* |
| * Configure the exact and hash address filters to handle a port's multicast |
| * and secondary unicast MAC addresses. |
| */ |
| static int set_addr_filters(const struct net_device *dev, bool sleep) |
| { |
| u64 mhash = 0; |
| u64 uhash = 0; |
| bool free = true; |
| u16 filt_idx[7]; |
| const u8 *addr[7]; |
| int ret, naddr = 0; |
| const struct netdev_hw_addr *ha; |
| int uc_cnt = netdev_uc_count(dev); |
| int mc_cnt = netdev_mc_count(dev); |
| const struct port_info *pi = netdev_priv(dev); |
| unsigned int mb = pi->adapter->fn; |
| |
| /* first do the secondary unicast addresses */ |
| netdev_for_each_uc_addr(ha, dev) { |
| addr[naddr++] = ha->addr; |
| if (--uc_cnt == 0 || naddr >= ARRAY_SIZE(addr)) { |
| ret = t4_alloc_mac_filt(pi->adapter, mb, pi->viid, free, |
| naddr, addr, filt_idx, &uhash, sleep); |
| if (ret < 0) |
| return ret; |
| |
| free = false; |
| naddr = 0; |
| } |
| } |
| |
| /* next set up the multicast addresses */ |
| netdev_for_each_mc_addr(ha, dev) { |
| addr[naddr++] = ha->addr; |
| if (--mc_cnt == 0 || naddr >= ARRAY_SIZE(addr)) { |
| ret = t4_alloc_mac_filt(pi->adapter, mb, pi->viid, free, |
| naddr, addr, filt_idx, &mhash, sleep); |
| if (ret < 0) |
| return ret; |
| |
| free = false; |
| naddr = 0; |
| } |
| } |
| |
| return t4_set_addr_hash(pi->adapter, mb, pi->viid, uhash != 0, |
| uhash | mhash, sleep); |
| } |
| |
| /* |
| * Set Rx properties of a port, such as promiscruity, address filters, and MTU. |
| * If @mtu is -1 it is left unchanged. |
| */ |
| static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) |
| { |
| int ret; |
| struct port_info *pi = netdev_priv(dev); |
| |
| ret = set_addr_filters(dev, sleep_ok); |
| if (ret == 0) |
| ret = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, mtu, |
| (dev->flags & IFF_PROMISC) ? 1 : 0, |
| (dev->flags & IFF_ALLMULTI) ? 1 : 0, 1, -1, |
| sleep_ok); |
| return ret; |
| } |
| |
| /** |
| * link_start - enable a port |
| * @dev: the port to enable |
| * |
| * Performs the MAC and PHY actions needed to enable a port. |
| */ |
| static int link_start(struct net_device *dev) |
| { |
| int ret; |
| struct port_info *pi = netdev_priv(dev); |
| unsigned int mb = pi->adapter->fn; |
| |
| /* |
| * We do not set address filters and promiscuity here, the stack does |
| * that step explicitly. |
| */ |
| ret = t4_set_rxmode(pi->adapter, mb, pi->viid, dev->mtu, -1, -1, -1, |
| !!(dev->features & NETIF_F_HW_VLAN_RX), true); |
| if (ret == 0) { |
| ret = t4_change_mac(pi->adapter, mb, pi->viid, |
| pi->xact_addr_filt, dev->dev_addr, true, |
| true); |
| if (ret >= 0) { |
| pi->xact_addr_filt = ret; |
| ret = 0; |
| } |
| } |
| if (ret == 0) |
| ret = t4_link_start(pi->adapter, mb, pi->tx_chan, |
| &pi->link_cfg); |
| if (ret == 0) |
| ret = t4_enable_vi(pi->adapter, mb, pi->viid, true, true); |
| return ret; |
| } |
| |
| /* |
| * Response queue handler for the FW event queue. |
| */ |
| static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp, |
| const struct pkt_gl *gl) |
| { |
| u8 opcode = ((const struct rss_header *)rsp)->opcode; |
| |
| rsp++; /* skip RSS header */ |
| if (likely(opcode == CPL_SGE_EGR_UPDATE)) { |
| const struct cpl_sge_egr_update *p = (void *)rsp; |
| unsigned int qid = EGR_QID(ntohl(p->opcode_qid)); |
| struct sge_txq *txq; |
| |
| txq = q->adap->sge.egr_map[qid - q->adap->sge.egr_start]; |
| txq->restarts++; |
| if ((u8 *)txq < (u8 *)q->adap->sge.ofldtxq) { |
| struct sge_eth_txq *eq; |
| |
| eq = container_of(txq, struct sge_eth_txq, q); |
| netif_tx_wake_queue(eq->txq); |
| } else { |
| struct sge_ofld_txq *oq; |
| |
| oq = container_of(txq, struct sge_ofld_txq, q); |
| tasklet_schedule(&oq->qresume_tsk); |
| } |
| } else if (opcode == CPL_FW6_MSG || opcode == CPL_FW4_MSG) { |
| const struct cpl_fw6_msg *p = (void *)rsp; |
| |
| if (p->type == 0) |
| t4_handle_fw_rpl(q->adap, p->data); |
| } else if (opcode == CPL_L2T_WRITE_RPL) { |
| const struct cpl_l2t_write_rpl *p = (void *)rsp; |
| |
| do_l2t_write_rpl(q->adap, p); |
| } else |
| dev_err(q->adap->pdev_dev, |
| "unexpected CPL %#x on FW event queue\n", opcode); |
| return 0; |
| } |
| |
| /** |
| * uldrx_handler - response queue handler for ULD queues |
| * @q: the response queue that received the packet |
| * @rsp: the response queue descriptor holding the offload message |
| * @gl: the gather list of packet fragments |
| * |
| * Deliver an ingress offload packet to a ULD. All processing is done by |
| * the ULD, we just maintain statistics. |
| */ |
| static int uldrx_handler(struct sge_rspq *q, const __be64 *rsp, |
| const struct pkt_gl *gl) |
| { |
| struct sge_ofld_rxq *rxq = container_of(q, struct sge_ofld_rxq, rspq); |
| |
| if (ulds[q->uld].rx_handler(q->adap->uld_handle[q->uld], rsp, gl)) { |
| rxq->stats.nomem++; |
| return -1; |
| } |
| if (gl == NULL) |
| rxq->stats.imm++; |
| else if (gl == CXGB4_MSG_AN) |
| rxq->stats.an++; |
| else |
| rxq->stats.pkts++; |
| return 0; |
| } |
| |
| static void disable_msi(struct adapter *adapter) |
| { |
| if (adapter->flags & USING_MSIX) { |
| pci_disable_msix(adapter->pdev); |
| adapter->flags &= ~USING_MSIX; |
| } else if (adapter->flags & USING_MSI) { |
| pci_disable_msi(adapter->pdev); |
| adapter->flags &= ~USING_MSI; |
| } |
| } |
| |
| /* |
| * Interrupt handler for non-data events used with MSI-X. |
| */ |
| static irqreturn_t t4_nondata_intr(int irq, void *cookie) |
| { |
| struct adapter *adap = cookie; |
| |
| u32 v = t4_read_reg(adap, MYPF_REG(PL_PF_INT_CAUSE)); |
| if (v & PFSW) { |
| adap->swintr = 1; |
| t4_write_reg(adap, MYPF_REG(PL_PF_INT_CAUSE), v); |
| } |
| t4_slow_intr_handler(adap); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Name the MSI-X interrupts. |
| */ |
| static void name_msix_vecs(struct adapter *adap) |
| { |
| int i, j, msi_idx = 2, n = sizeof(adap->msix_info[0].desc); |
| |
| /* non-data interrupts */ |
| snprintf(adap->msix_info[0].desc, n, "%s", adap->port[0]->name); |
| |
| /* FW events */ |
| snprintf(adap->msix_info[1].desc, n, "%s-FWeventq", |
| adap->port[0]->name); |
| |
| /* Ethernet queues */ |
| for_each_port(adap, j) { |
| struct net_device *d = adap->port[j]; |
| const struct port_info *pi = netdev_priv(d); |
| |
| for (i = 0; i < pi->nqsets; i++, msi_idx++) |
| snprintf(adap->msix_info[msi_idx].desc, n, "%s-Rx%d", |
| d->name, i); |
| } |
| |
| /* offload queues */ |
| for_each_ofldrxq(&adap->sge, i) |
| snprintf(adap->msix_info[msi_idx++].desc, n, "%s-ofld%d", |
| adap->port[0]->name, i); |
| |
| for_each_rdmarxq(&adap->sge, i) |
| snprintf(adap->msix_info[msi_idx++].desc, n, "%s-rdma%d", |
| adap->port[0]->name, i); |
| } |
| |
| static int request_msix_queue_irqs(struct adapter *adap) |
| { |
| struct sge *s = &adap->sge; |
| int err, ethqidx, ofldqidx = 0, rdmaqidx = 0, msi = 2; |
| |
| err = request_irq(adap->msix_info[1].vec, t4_sge_intr_msix, 0, |
| adap->msix_info[1].desc, &s->fw_evtq); |
| if (err) |
| return err; |
| |
| for_each_ethrxq(s, ethqidx) { |
| err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0, |
| adap->msix_info[msi].desc, |
| &s->ethrxq[ethqidx].rspq); |
| if (err) |
| goto unwind; |
| msi++; |
| } |
| for_each_ofldrxq(s, ofldqidx) { |
| err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0, |
| adap->msix_info[msi].desc, |
| &s->ofldrxq[ofldqidx].rspq); |
| if (err) |
| goto unwind; |
| msi++; |
| } |
| for_each_rdmarxq(s, rdmaqidx) { |
| err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0, |
| adap->msix_info[msi].desc, |
| &s->rdmarxq[rdmaqidx].rspq); |
| if (err) |
| goto unwind; |
| msi++; |
| } |
| return 0; |
| |
| unwind: |
| while (--rdmaqidx >= 0) |
| free_irq(adap->msix_info[--msi].vec, |
| &s->rdmarxq[rdmaqidx].rspq); |
| while (--ofldqidx >= 0) |
| free_irq(adap->msix_info[--msi].vec, |
| &s->ofldrxq[ofldqidx].rspq); |
| while (--ethqidx >= 0) |
| free_irq(adap->msix_info[--msi].vec, &s->ethrxq[ethqidx].rspq); |
| free_irq(adap->msix_info[1].vec, &s->fw_evtq); |
| return err; |
| } |
| |
| static void free_msix_queue_irqs(struct adapter *adap) |
| { |
| int i, msi = 2; |
| struct sge *s = &adap->sge; |
| |
| free_irq(adap->msix_info[1].vec, &s->fw_evtq); |
| for_each_ethrxq(s, i) |
| free_irq(adap->msix_info[msi++].vec, &s->ethrxq[i].rspq); |
| for_each_ofldrxq(s, i) |
| free_irq(adap->msix_info[msi++].vec, &s->ofldrxq[i].rspq); |
| for_each_rdmarxq(s, i) |
| free_irq(adap->msix_info[msi++].vec, &s->rdmarxq[i].rspq); |
| } |
| |
| /** |
| * write_rss - write the RSS table for a given port |
| * @pi: the port |
| * @queues: array of queue indices for RSS |
| * |
| * Sets up the portion of the HW RSS table for the port's VI to distribute |
| * packets to the Rx queues in @queues. |
| */ |
| static int write_rss(const struct port_info *pi, const u16 *queues) |
| { |
| u16 *rss; |
| int i, err; |
| const struct sge_eth_rxq *q = &pi->adapter->sge.ethrxq[pi->first_qset]; |
| |
| rss = kmalloc(pi->rss_size * sizeof(u16), GFP_KERNEL); |
| if (!rss) |
| return -ENOMEM; |
| |
| /* map the queue indices to queue ids */ |
| for (i = 0; i < pi->rss_size; i++, queues++) |
| rss[i] = q[*queues].rspq.abs_id; |
| |
| err = t4_config_rss_range(pi->adapter, pi->adapter->fn, pi->viid, 0, |
| pi->rss_size, rss, pi->rss_size); |
| kfree(rss); |
| return err; |
| } |
| |
| /** |
| * setup_rss - configure RSS |
| * @adap: the adapter |
| * |
| * Sets up RSS for each port. |
| */ |
| static int setup_rss(struct adapter *adap) |
| { |
| int i, err; |
| |
| for_each_port(adap, i) { |
| const struct port_info *pi = adap2pinfo(adap, i); |
| |
| err = write_rss(pi, pi->rss); |
| if (err) |
| return err; |
| } |
| return 0; |
| } |
| |
| /* |
| * Return the channel of the ingress queue with the given qid. |
| */ |
| static unsigned int rxq_to_chan(const struct sge *p, unsigned int qid) |
| { |
| qid -= p->ingr_start; |
| return netdev2pinfo(p->ingr_map[qid]->netdev)->tx_chan; |
| } |
| |
| /* |
| * Wait until all NAPI handlers are descheduled. |
| */ |
| static void quiesce_rx(struct adapter *adap) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) { |
| struct sge_rspq *q = adap->sge.ingr_map[i]; |
| |
| if (q && q->handler) |
| napi_disable(&q->napi); |
| } |
| } |
| |
| /* |
| * Enable NAPI scheduling and interrupt generation for all Rx queues. |
| */ |
| static void enable_rx(struct adapter *adap) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) { |
| struct sge_rspq *q = adap->sge.ingr_map[i]; |
| |
| if (!q) |
| continue; |
| if (q->handler) |
| napi_enable(&q->napi); |
| /* 0-increment GTS to start the timer and enable interrupts */ |
| t4_write_reg(adap, MYPF_REG(SGE_PF_GTS), |
| SEINTARM(q->intr_params) | |
| INGRESSQID(q->cntxt_id)); |
| } |
| } |
| |
| /** |
| * setup_sge_queues - configure SGE Tx/Rx/response queues |
| * @adap: the adapter |
| * |
| * Determines how many sets of SGE queues to use and initializes them. |
| * We support multiple queue sets per port if we have MSI-X, otherwise |
| * just one queue set per port. |
| */ |
| static int setup_sge_queues(struct adapter *adap) |
| { |
| int err, msi_idx, i, j; |
| struct sge *s = &adap->sge; |
| |
| bitmap_zero(s->starving_fl, MAX_EGRQ); |
| bitmap_zero(s->txq_maperr, MAX_EGRQ); |
| |
| if (adap->flags & USING_MSIX) |
| msi_idx = 1; /* vector 0 is for non-queue interrupts */ |
| else { |
| err = t4_sge_alloc_rxq(adap, &s->intrq, false, adap->port[0], 0, |
| NULL, NULL); |
| if (err) |
| return err; |
| msi_idx = -((int)s->intrq.abs_id + 1); |
| } |
| |
| err = t4_sge_alloc_rxq(adap, &s->fw_evtq, true, adap->port[0], |
| msi_idx, NULL, fwevtq_handler); |
| if (err) { |
| freeout: t4_free_sge_resources(adap); |
| return err; |
| } |
| |
| for_each_port(adap, i) { |
| struct net_device *dev = adap->port[i]; |
| struct port_info *pi = netdev_priv(dev); |
| struct sge_eth_rxq *q = &s->ethrxq[pi->first_qset]; |
| struct sge_eth_txq *t = &s->ethtxq[pi->first_qset]; |
| |
| for (j = 0; j < pi->nqsets; j++, q++) { |
| if (msi_idx > 0) |
| msi_idx++; |
| err = t4_sge_alloc_rxq(adap, &q->rspq, false, dev, |
| msi_idx, &q->fl, |
| t4_ethrx_handler); |
| if (err) |
| goto freeout; |
| q->rspq.idx = j; |
| memset(&q->stats, 0, sizeof(q->stats)); |
| } |
| for (j = 0; j < pi->nqsets; j++, t++) { |
| err = t4_sge_alloc_eth_txq(adap, t, dev, |
| netdev_get_tx_queue(dev, j), |
| s->fw_evtq.cntxt_id); |
| if (err) |
| goto freeout; |
| } |
| } |
| |
| j = s->ofldqsets / adap->params.nports; /* ofld queues per channel */ |
| for_each_ofldrxq(s, i) { |
| struct sge_ofld_rxq *q = &s->ofldrxq[i]; |
| struct net_device *dev = adap->port[i / j]; |
| |
| if (msi_idx > 0) |
| msi_idx++; |
| err = t4_sge_alloc_rxq(adap, &q->rspq, false, dev, msi_idx, |
| &q->fl, uldrx_handler); |
| if (err) |
| goto freeout; |
| memset(&q->stats, 0, sizeof(q->stats)); |
| s->ofld_rxq[i] = q->rspq.abs_id; |
| err = t4_sge_alloc_ofld_txq(adap, &s->ofldtxq[i], dev, |
| s->fw_evtq.cntxt_id); |
| if (err) |
| goto freeout; |
| } |
| |
| for_each_rdmarxq(s, i) { |
| struct sge_ofld_rxq *q = &s->rdmarxq[i]; |
| |
| if (msi_idx > 0) |
| msi_idx++; |
| err = t4_sge_alloc_rxq(adap, &q->rspq, false, adap->port[i], |
| msi_idx, &q->fl, uldrx_handler); |
| if (err) |
| goto freeout; |
| memset(&q->stats, 0, sizeof(q->stats)); |
| s->rdma_rxq[i] = q->rspq.abs_id; |
| } |
| |
| for_each_port(adap, i) { |
| /* |
| * Note that ->rdmarxq[i].rspq.cntxt_id below is 0 if we don't |
| * have RDMA queues, and that's the right value. |
| */ |
| err = t4_sge_alloc_ctrl_txq(adap, &s->ctrlq[i], adap->port[i], |
| s->fw_evtq.cntxt_id, |
| s->rdmarxq[i].rspq.cntxt_id); |
| if (err) |
| goto freeout; |
| } |
| |
| t4_write_reg(adap, MPS_TRC_RSS_CONTROL, |
| RSSCONTROL(netdev2pinfo(adap->port[0])->tx_chan) | |
| QUEUENUMBER(s->ethrxq[0].rspq.abs_id)); |
| return 0; |
| } |
| |
| /* |
| * Returns 0 if new FW was successfully loaded, a positive errno if a load was |
| * started but failed, and a negative errno if flash load couldn't start. |
| */ |
| static int upgrade_fw(struct adapter *adap) |
| { |
| int ret; |
| u32 vers; |
| const struct fw_hdr *hdr; |
| const struct firmware *fw; |
| struct device *dev = adap->pdev_dev; |
| |
| ret = request_firmware(&fw, FW_FNAME, dev); |
| if (ret < 0) { |
| dev_err(dev, "unable to load firmware image " FW_FNAME |
| ", error %d\n", ret); |
| return ret; |
| } |
| |
| hdr = (const struct fw_hdr *)fw->data; |
| vers = ntohl(hdr->fw_ver); |
| if (FW_HDR_FW_VER_MAJOR_GET(vers) != FW_VERSION_MAJOR) { |
| ret = -EINVAL; /* wrong major version, won't do */ |
| goto out; |
| } |
| |
| /* |
| * If the flash FW is unusable or we found something newer, load it. |
| */ |
| if (FW_HDR_FW_VER_MAJOR_GET(adap->params.fw_vers) != FW_VERSION_MAJOR || |
| vers > adap->params.fw_vers) { |
| ret = -t4_load_fw(adap, fw->data, fw->size); |
| if (!ret) |
| dev_info(dev, "firmware upgraded to version %pI4 from " |
| FW_FNAME "\n", &hdr->fw_ver); |
| } |
| out: release_firmware(fw); |
| return ret; |
| } |
| |
| /* |
| * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc. |
| * The allocated memory is cleared. |
| */ |
| void *t4_alloc_mem(size_t size) |
| { |
| void *p = kzalloc(size, GFP_KERNEL); |
| |
| if (!p) |
| p = vzalloc(size); |
| return p; |
| } |
| |
| /* |
| * Free memory allocated through alloc_mem(). |
| */ |
| static void t4_free_mem(void *addr) |
| { |
| if (is_vmalloc_addr(addr)) |
| vfree(addr); |
| else |
| kfree(addr); |
| } |
| |
| static inline int is_offload(const struct adapter *adap) |
| { |
| return adap->params.offload; |
| } |
| |
| /* |
| * Implementation of ethtool operations. |
| */ |
| |
| static u32 get_msglevel(struct net_device *dev) |
| { |
| return netdev2adap(dev)->msg_enable; |
| } |
| |
| static void set_msglevel(struct net_device *dev, u32 val) |
| { |
| netdev2adap(dev)->msg_enable = val; |
| } |
| |
| static char stats_strings[][ETH_GSTRING_LEN] = { |
| "TxOctetsOK ", |
| "TxFramesOK ", |
| "TxBroadcastFrames ", |
| "TxMulticastFrames ", |
| "TxUnicastFrames ", |
| "TxErrorFrames ", |
| |
| "TxFrames64 ", |
| "TxFrames65To127 ", |
| "TxFrames128To255 ", |
| "TxFrames256To511 ", |
| "TxFrames512To1023 ", |
| "TxFrames1024To1518 ", |
| "TxFrames1519ToMax ", |
| |
| "TxFramesDropped ", |
| "TxPauseFrames ", |
| "TxPPP0Frames ", |
| "TxPPP1Frames ", |
| "TxPPP2Frames ", |
| "TxPPP3Frames ", |
| "TxPPP4Frames ", |
| "TxPPP5Frames ", |
| "TxPPP6Frames ", |
| "TxPPP7Frames ", |
| |
| "RxOctetsOK ", |
| "RxFramesOK ", |
| "RxBroadcastFrames ", |
| "RxMulticastFrames ", |
| "RxUnicastFrames ", |
| |
| "RxFramesTooLong ", |
| "RxJabberErrors ", |
| "RxFCSErrors ", |
| "RxLengthErrors ", |
| "RxSymbolErrors ", |
| "RxRuntFrames ", |
| |
| "RxFrames64 ", |
| "RxFrames65To127 ", |
| "RxFrames128To255 ", |
| "RxFrames256To511 ", |
| "RxFrames512To1023 ", |
| "RxFrames1024To1518 ", |
| "RxFrames1519ToMax ", |
| |
| "RxPauseFrames ", |
| "RxPPP0Frames ", |
| "RxPPP1Frames ", |
| "RxPPP2Frames ", |
| "RxPPP3Frames ", |
| "RxPPP4Frames ", |
| "RxPPP5Frames ", |
| "RxPPP6Frames ", |
| "RxPPP7Frames ", |
| |
| "RxBG0FramesDropped ", |
| "RxBG1FramesDropped ", |
| "RxBG2FramesDropped ", |
| "RxBG3FramesDropped ", |
| "RxBG0FramesTrunc ", |
| "RxBG1FramesTrunc ", |
| "RxBG2FramesTrunc ", |
| "RxBG3FramesTrunc ", |
| |
| "TSO ", |
| "TxCsumOffload ", |
| "RxCsumGood ", |
| "VLANextractions ", |
| "VLANinsertions ", |
| "GROpackets ", |
| "GROmerged ", |
| }; |
| |
| static int get_sset_count(struct net_device *dev, int sset) |
| { |
| switch (sset) { |
| case ETH_SS_STATS: |
| return ARRAY_SIZE(stats_strings); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| #define T4_REGMAP_SIZE (160 * 1024) |
| |
| static int get_regs_len(struct net_device *dev) |
| { |
| return T4_REGMAP_SIZE; |
| } |
| |
| static int get_eeprom_len(struct net_device *dev) |
| { |
| return EEPROMSIZE; |
| } |
| |
| static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| struct adapter *adapter = netdev2adap(dev); |
| |
| strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
| strlcpy(info->bus_info, pci_name(adapter->pdev), |
| sizeof(info->bus_info)); |
| |
| if (adapter->params.fw_vers) |
| snprintf(info->fw_version, sizeof(info->fw_version), |
| "%u.%u.%u.%u, TP %u.%u.%u.%u", |
| FW_HDR_FW_VER_MAJOR_GET(adapter->params.fw_vers), |
| FW_HDR_FW_VER_MINOR_GET(adapter->params.fw_vers), |
| FW_HDR_FW_VER_MICRO_GET(adapter->params.fw_vers), |
| FW_HDR_FW_VER_BUILD_GET(adapter->params.fw_vers), |
| FW_HDR_FW_VER_MAJOR_GET(adapter->params.tp_vers), |
| FW_HDR_FW_VER_MINOR_GET(adapter->params.tp_vers), |
| FW_HDR_FW_VER_MICRO_GET(adapter->params.tp_vers), |
| FW_HDR_FW_VER_BUILD_GET(adapter->params.tp_vers)); |
| } |
| |
| static void get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| { |
| if (stringset == ETH_SS_STATS) |
| memcpy(data, stats_strings, sizeof(stats_strings)); |
| } |
| |
| /* |
| * port stats maintained per queue of the port. They should be in the same |
| * order as in stats_strings above. |
| */ |
| struct queue_port_stats { |
| u64 tso; |
| u64 tx_csum; |
| u64 rx_csum; |
| u64 vlan_ex; |
| u64 vlan_ins; |
| u64 gro_pkts; |
| u64 gro_merged; |
| }; |
| |
| static void collect_sge_port_stats(const struct adapter *adap, |
| const struct port_info *p, struct queue_port_stats *s) |
| { |
| int i; |
| const struct sge_eth_txq *tx = &adap->sge.ethtxq[p->first_qset]; |
| const struct sge_eth_rxq *rx = &adap->sge.ethrxq[p->first_qset]; |
| |
| memset(s, 0, sizeof(*s)); |
| for (i = 0; i < p->nqsets; i++, rx++, tx++) { |
| s->tso += tx->tso; |
| s->tx_csum += tx->tx_cso; |
| s->rx_csum += rx->stats.rx_cso; |
| s->vlan_ex += rx->stats.vlan_ex; |
| s->vlan_ins += tx->vlan_ins; |
| s->gro_pkts += rx->stats.lro_pkts; |
| s->gro_merged += rx->stats.lro_merged; |
| } |
| } |
| |
| static void get_stats(struct net_device *dev, struct ethtool_stats *stats, |
| u64 *data) |
| { |
| struct port_info *pi = netdev_priv(dev); |
| struct adapter *adapter = pi->adapter; |
| |
| t4_get_port_stats(adapter, pi->tx_chan, (struct port_stats *)data); |
| |
| data += sizeof(struct port_stats) / sizeof(u64); |
| collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data); |
| } |
| |
| /* |
| * Return a version number to identify the type of adapter. The scheme is: |
| * - bits 0..9: chip version |
| * - bits 10..15: chip revision |
| * - bits 16..23: register dump version |
| */ |
| static inline unsigned int mk_adap_vers(const struct adapter *ap) |
| { |
| return 4 | (ap->params.rev << 10) | (1 << 16); |
| } |
| |
| static void reg_block_dump(struct adapter *ap, void *buf, unsigned int start, |
| unsigned int end) |
| { |
| u32 *p = buf + start; |
| |
| for ( ; start <= end; start += sizeof(u32)) |
| *p++ = t4_read_reg(ap, start); |
| } |
| |
| static void get_regs(struct net_device *dev, struct ethtool_regs *regs, |
| void *buf) |
| { |
| static const unsigned int reg_ranges[] = { |
| 0x1008, 0x1108, |
| 0x1180, 0x11b4, |
| 0x11fc, 0x123c, |
| 0x1300, 0x173c, |
| 0x1800, 0x18fc, |
| 0x3000, 0x30d8, |
| 0x30e0, 0x5924, |
| 0x5960, 0x59d4, |
| 0x5a00, 0x5af8, |
| 0x6000, 0x6098, |
| 0x6100, 0x6150, |
| 0x6200, 0x6208, |
| 0x6240, 0x6248, |
| 0x6280, 0x6338, |
| 0x6370, 0x638c, |
| 0x6400, 0x643c, |
| 0x6500, 0x6524, |
| 0x6a00, 0x6a38, |
| 0x6a60, 0x6a78, |
| 0x6b00, 0x6b84, |
| 0x6bf0, 0x6c84, |
| 0x6cf0, 0x6d84, |
| 0x6df0, 0x6e84, |
| 0x6ef0, 0x6f84, |
| 0x6ff0, 0x7084, |
| 0x70f0, 0x7184, |
| 0x71f0, 0x7284, |
| 0x72f0, 0x7384, |
| 0x73f0, 0x7450, |
| 0x7500, 0x7530, |
| 0x7600, 0x761c, |
| 0x7680, 0x76cc, |
| 0x7700, 0x7798, |
| 0x77c0, 0x77fc, |
| 0x7900, 0x79fc, |
| 0x7b00, 0x7c38, |
| 0x7d00, 0x7efc, |
| 0x8dc0, 0x8e1c, |
| 0x8e30, 0x8e78, |
| 0x8ea0, 0x8f6c, |
| 0x8fc0, 0x9074, |
| 0x90fc, 0x90fc, |
| 0x9400, 0x9458, |
| 0x9600, 0x96bc, |
| 0x9800, 0x9808, |
| 0x9820, 0x983c, |
| 0x9850, 0x9864, |
| 0x9c00, 0x9c6c, |
| 0x9c80, 0x9cec, |
| 0x9d00, 0x9d6c, |
| 0x9d80, 0x9dec, |
| 0x9e00, 0x9e6c, |
| 0x9e80, 0x9eec, |
| 0x9f00, 0x9f6c, |
| 0x9f80, 0x9fec, |
| 0xd004, 0xd03c, |
| 0xdfc0, 0xdfe0, |
| 0xe000, 0xea7c, |
| 0xf000, 0x11190, |
| 0x19040, 0x1906c, |
| 0x19078, 0x19080, |
| 0x1908c, 0x19124, |
| 0x19150, 0x191b0, |
| 0x191d0, 0x191e8, |
| 0x19238, 0x1924c, |
| 0x193f8, 0x19474, |
| 0x19490, 0x194f8, |
| 0x19800, 0x19f30, |
| 0x1a000, 0x1a06c, |
| 0x1a0b0, 0x1a120, |
| 0x1a128, 0x1a138, |
| 0x1a190, 0x1a1c4, |
| 0x1a1fc, 0x1a1fc, |
| 0x1e040, 0x1e04c, |
| 0x1e284, 0x1e28c, |
| 0x1e2c0, 0x1e2c0, |
| 0x1e2e0, 0x1e2e0, |
| 0x1e300, 0x1e384, |
| 0x1e3c0, 0x1e3c8, |
| 0x1e440, 0x1e44c, |
| 0x1e684, 0x1e68c, |
| 0x1e6c0, 0x1e6c0, |
| 0x1e6e0, 0x1e6e0, |
| 0x1e700, 0x1e784, |
| 0x1e7c0, 0x1e7c8, |
| 0x1e840, 0x1e84c, |
| 0x1ea84, 0x1ea8c, |
| 0x1eac0, 0x1eac0, |
| 0x1eae0, 0x1eae0, |
| 0x1eb00, 0x1eb84, |
| 0x1ebc0, 0x1ebc8, |
| 0x1ec40, 0x1ec4c, |
| 0x1ee84, 0x1ee8c, |
| 0x1eec0, 0x1eec0, |
| 0x1eee0, 0x1eee0, |
| 0x1ef00, 0x1ef84, |
| 0x1efc0, 0x1efc8, |
| 0x1f040, 0x1f04c, |
| 0x1f284, 0x1f28c, |
| 0x1f2c0, 0x1f2c0, |
| 0x1f2e0, 0x1f2e0, |
| 0x1f300, 0x1f384, |
| 0x1f3c0, 0x1f3c8, |
| 0x1f440, 0x1f44c, |
| 0x1f684, 0x1f68c, |
| 0x1f6c0, 0x1f6c0, |
| 0x1f6e0, 0x1f6e0, |
| 0x1f700, 0x1f784, |
| 0x1f7c0, 0x1f7c8, |
| 0x1f840, 0x1f84c, |
| 0x1fa84, 0x1fa8c, |
| 0x1fac0, 0x1fac0, |
| 0x1fae0, 0x1fae0, |
| 0x1fb00, 0x1fb84, |
| 0x1fbc0, 0x1fbc8, |
| 0x1fc40, 0x1fc4c, |
| 0x1fe84, 0x1fe8c, |
| 0x1fec0, 0x1fec0, |
| 0x1fee0, 0x1fee0, |
| 0x1ff00, 0x1ff84, |
| 0x1ffc0, 0x1ffc8, |
| 0x20000, 0x2002c, |
| 0x20100, 0x2013c, |
| 0x20190, 0x201c8, |
| 0x20200, 0x20318, |
| 0x20400, 0x20528, |
| 0x20540, 0x20614, |
| 0x21000, 0x21040, |
| 0x2104c, 0x21060, |
| 0x210c0, 0x210ec, |
| 0x21200, 0x21268, |
| 0x21270, 0x21284, |
| 0x212fc, 0x21388, |
| 0x21400, 0x21404, |
| 0x21500, 0x21518, |
| 0x2152c, 0x2153c, |
| 0x21550, 0x21554, |
| 0x21600, 0x21600, |
| 0x21608, 0x21628, |
| 0x21630, 0x2163c, |
| 0x21700, 0x2171c, |
| 0x21780, 0x2178c, |
| 0x21800, 0x21c38, |
| 0x21c80, 0x21d7c, |
| 0x21e00, 0x21e04, |
| 0x22000, 0x2202c, |
| 0x22100, 0x2213c, |
| 0x22190, 0x221c8, |
| 0x22200, 0x22318, |
| 0x22400, 0x22528, |
| 0x22540, 0x22614, |
| 0x23000, 0x23040, |
| 0x2304c, 0x23060, |
| 0x230c0, 0x230ec, |
| 0x23200, 0x23268, |
| 0x23270, 0x23284, |
| 0x232fc, 0x23388, |
| 0x23400, 0x23404, |
| 0x23500, 0x23518, |
| 0x2352c, 0x2353c, |
| 0x23550, 0x23554, |
| 0x23600, 0x23600, |
| 0x23608, 0x23628, |
| 0x23630, 0x2363c, |
| 0x23700, 0x2371c, |
| 0x23780, 0x2378c, |
| 0x23800, 0x23c38, |
| 0x23c80, 0x23d7c, |
| 0x23e00, 0x23e04, |
| 0x24000, 0x2402c, |
| 0x24100, 0x2413c, |
| 0x24190, 0x241c8, |
| 0x24200, 0x24318, |
| 0x24400, 0x24528, |
| 0x24540, 0x24614, |
| 0x25000, 0x25040, |
| 0x2504c, 0x25060, |
| 0x250c0, 0x250ec, |
| 0x25200, 0x25268, |
| 0x25270, 0x25284, |
| 0x252fc, 0x25388, |
| 0x25400, 0x25404, |
| 0x25500, 0x25518, |
| 0x2552c, 0x2553c, |
| 0x25550, 0x25554, |
| 0x25600, 0x25600, |
| 0x25608, 0x25628, |
| 0x25630, 0x2563c, |
| 0x25700, 0x2571c, |
| 0x25780, 0x2578c, |
| 0x25800, 0x25c38, |
| 0x25c80, 0x25d7c, |
| 0x25e00, 0x25e04, |
| 0x26000, 0x2602c, |
| 0x26100, 0x2613c, |
| 0x26190, 0x261c8, |
| 0x26200, 0x26318, |
| 0x26400, 0x26528, |
| 0x26540, 0x26614, |
| 0x27000, 0x27040, |
| 0x2704c, 0x27060, |
| 0x270c0, 0x270ec, |
| 0x27200, 0x27268, |
| 0x27270, 0x27284, |
| 0x272fc, 0x27388, |
| 0x27400, 0x27404, |
| 0x27500, 0x27518, |
| 0x2752c, 0x2753c, |
| 0x27550, 0x27554, |
| 0x27600, 0x27600, |
| 0x27608, 0x27628, |
| 0x27630, 0x2763c, |
| 0x27700, 0x2771c, |
| 0x27780, 0x2778c, |
| 0x27800, 0x27c38, |
| 0x27c80, 0x27d7c, |
| 0x27e00, 0x27e04 |
| }; |
| |
| int i; |
| struct adapter *ap = netdev2adap(dev); |
| |
| regs->version = mk_adap_vers(ap); |
| |
| memset(buf, 0, T4_REGMAP_SIZE); |
| for (i = 0; i < ARRAY_SIZE(reg_ranges); i += 2) |
| reg_block_dump(ap, buf, reg_ranges[i], reg_ranges[i + 1]); |
| } |
| |
| static int restart_autoneg(struct net_device *dev) |
| { |
| struct port_info *p = netdev_priv(dev); |
| |
| if (!netif_running(dev)) |
| return -EAGAIN; |
| if (p->link_cfg.autoneg != AUTONEG_ENABLE) |
| return -EINVAL; |
| t4_restart_aneg(p->adapter, p->adapter->fn, p->tx_chan); |
| return 0; |
| } |
| |
| static int identify_port(struct net_device *dev, |
| enum ethtool_phys_id_state state) |
| { |
| unsigned int val; |
| struct adapter *adap = netdev2adap(dev); |
| |
| if (state == ETHTOOL_ID_ACTIVE) |
| val = 0xffff; |
| else if (state == ETHTOOL_ID_INACTIVE) |
| val = 0; |
| else |
| return -EINVAL; |
| |
| return t4_identify_port(adap, adap->fn, netdev2pinfo(dev)->viid, val); |
| } |
| |
| static unsigned int from_fw_linkcaps(unsigned int type, unsigned int caps) |
| { |
| unsigned int v = 0; |
| |
| if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI || |
| type == FW_PORT_TYPE_BT_XAUI) { |
| v |= SUPPORTED_TP; |
| if (caps & FW_PORT_CAP_SPEED_100M) |
| v |= SUPPORTED_100baseT_Full; |
| if (caps & FW_PORT_CAP_SPEED_1G) |
| v |= SUPPORTED_1000baseT_Full; |
| if (caps & FW_PORT_CAP_SPEED_10G) |
| v |= SUPPORTED_10000baseT_Full; |
| } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) { |
| v |= SUPPORTED_Backplane; |
| if (caps & FW_PORT_CAP_SPEED_1G) |
| v |= SUPPORTED_1000baseKX_Full; |
| if (caps & FW_PORT_CAP_SPEED_10G) |
| v |= SUPPORTED_10000baseKX4_Full; |
| } else if (type == FW_PORT_TYPE_KR) |
| v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full; |
| else if (type == FW_PORT_TYPE_BP_AP) |
| v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | |
| SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full; |
| else if (type == FW_PORT_TYPE_BP4_AP) |
| v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | |
| SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full | |
| SUPPORTED_10000baseKX4_Full; |
| else if (type == FW_PORT_TYPE_FIBER_XFI || |
| type == FW_PORT_TYPE_FIBER_XAUI || type == FW_PORT_TYPE_SFP) |
| v |= SUPPORTED_FIBRE; |
| |
| if (caps & FW_PORT_CAP_ANEG) |
| v |= SUPPORTED_Autoneg; |
| return v; |
| } |
| |
| static unsigned int to_fw_linkcaps(unsigned int caps) |
| { |
| unsigned int v = 0; |
| |
| if (caps & ADVERTISED_100baseT_Full) |
| v |= FW_PORT_CAP_SPEED_100M; |
| if (caps & ADVERTISED_1000baseT_Full) |
| v |= FW_PORT_CAP_SPEED_1G; |
| if (caps & ADVERTISED_10000baseT_Full) |
| v |= FW_PORT_CAP_SPEED_10G; |
| return v; |
| } |
| |
| static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| const struct port_info *p = netdev_priv(dev); |
| |
| if (p->port_type == FW_PORT_TYPE_BT_SGMII || |
| p->port_type == FW_PORT_TYPE_BT_XFI || |
| p->port_type == FW_PORT_TYPE_BT_XAUI) |
| cmd->port = PORT_TP; |
| else if (p->port_type == FW_PORT_TYPE_FIBER_XFI || |
| p->port_type == FW_PORT_TYPE_FIBER_XAUI) |
| cmd->port = PORT_FIBRE; |
| else if (p->port_type == FW_PORT_TYPE_SFP) { |
| if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || |
| p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) |
| cmd->port = PORT_DA; |
| else |
| cmd->port = PORT_FIBRE; |
| } else |
| cmd->port = PORT_OTHER; |
| |
| if (p->mdio_addr >= 0) { |
| cmd->phy_address = p->mdio_addr; |
| cmd->transceiver = XCVR_EXTERNAL; |
| cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ? |
| MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45; |
| } else { |
| cmd->phy_address = 0; /* not really, but no better option */ |
| cmd->transceiver = XCVR_INTERNAL; |
| cmd->mdio_support = 0; |
| } |
| |
| cmd->supported = from_fw_linkcaps(p->port_type, p->link_cfg.supported); |
| cmd->advertising = from_fw_linkcaps(p->port_type, |
| p->link_cfg.advertising); |
| ethtool_cmd_speed_set(cmd, |
| netif_carrier_ok(dev) ? p->link_cfg.speed : 0); |
| cmd->duplex = DUPLEX_FULL; |
| cmd->autoneg = p->link_cfg.autoneg; |
| cmd->maxtxpkt = 0; |
| cmd->maxrxpkt = 0; |
| return 0; |
| } |
| |
| static unsigned int speed_to_caps(int speed) |
| { |
| if (speed == SPEED_100) |
| return FW_PORT_CAP_SPEED_100M; |
| if (speed == SPEED_1000) |
| return FW_PORT_CAP_SPEED_1G; |
| if (speed == SPEED_10000) |
| return FW_PORT_CAP_SPEED_10G; |
| return 0; |
| } |
| |
| static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| unsigned int cap; |
| struct port_info *p = netdev_priv(dev); |
| struct link_config *lc = &p->link_cfg; |
| u32 speed = ethtool_cmd_speed(cmd); |
| |
| if (cmd->duplex != DUPLEX_FULL) /* only full-duplex supported */ |
| return -EINVAL; |
| |
| if (!(lc->supported & FW_PORT_CAP_ANEG)) { |
| /* |
| * PHY offers a single speed. See if that's what's |
| * being requested. |
| */ |
| if (cmd->autoneg == AUTONEG_DISABLE && |
| (lc->supported & speed_to_caps(speed))) |
| return 0; |
| return -EINVAL; |
| } |
| |
| if (cmd->autoneg == AUTONEG_DISABLE) { |
| cap = speed_to_caps(speed); |
| |
| if (!(lc->supported & cap) || (speed == SPEED_1000) || |
| (speed == SPEED_10000)) |
| return -EINVAL; |
| lc->requested_speed = cap; |
| lc->advertising = 0; |
| } else { |
| cap = to_fw_linkcaps(cmd->advertising); |
| if (!(lc->supported & cap)) |
| return -EINVAL; |
| lc->requested_speed = 0; |
| lc->advertising = cap | FW_PORT_CAP_ANEG; |
| } |
| lc->autoneg = cmd->autoneg; |
| |
| if (netif_running(dev)) |
| return t4_link_start(p->adapter, p->adapter->fn, p->tx_chan, |
| lc); |
| return 0; |
| } |
| |
| static void get_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct port_info *p = netdev_priv(dev); |
| |
| epause->autoneg = (p->link_cfg.requested_fc & PAUSE_AUTONEG) != 0; |
| epause->rx_pause = (p->link_cfg.fc & PAUSE_RX) != 0; |
| epause->tx_pause = (p->link_cfg.fc & PAUSE_TX) != 0; |
| } |
| |
| static int set_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct port_info *p = netdev_priv(dev); |
| struct link_config *lc = &p->link_cfg; |
| |
| if (epause->autoneg == AUTONEG_DISABLE) |
| lc->requested_fc = 0; |
| else if (lc->supported & FW_PORT_CAP_ANEG) |
| lc->requested_fc = PAUSE_AUTONEG; |
| else |
| return -EINVAL; |
| |
| if (epause->rx_pause) |
| lc->requested_fc |= PAUSE_RX; |
| if (epause->tx_pause) |
| lc->requested_fc |= PAUSE_TX; |
| if (netif_running(dev)) |
| return t4_link_start(p->adapter, p->adapter->fn, p->tx_chan, |
| lc); |
| return 0; |
| } |
| |
| static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) |
| { |
| const struct port_info *pi = netdev_priv(dev); |
| const struct sge *s = &pi->adapter->sge; |
| |
| e->rx_max_pending = MAX_RX_BUFFERS; |
| e->rx_mini_max_pending = MAX_RSPQ_ENTRIES; |
| e->rx_jumbo_max_pending = 0; |
| e->tx_max_pending = MAX_TXQ_ENTRIES; |
| |
| e->rx_pending = s->ethrxq[pi->first_qset].fl.size - 8; |
| e->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size; |
| e->rx_jumbo_pending = 0; |
| e->tx_pending = s->ethtxq[pi->first_qset].q.size; |
| } |
| |
| static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) |
| { |
| int i; |
| const struct port_info *pi = netdev_priv(dev); |
| struct adapter *adapter = pi->adapter; |
| struct sge *s = &adapter->sge; |
| |
| if (e->rx_pending > MAX_RX_BUFFERS || e->rx_jumbo_pending || |
| e->tx_pending > MAX_TXQ_ENTRIES || |
| e->rx_mini_pending > MAX_RSPQ_ENTRIES || |
| e->rx_mini_pending < MIN_RSPQ_ENTRIES || |
| e->rx_pending < MIN_FL_ENTRIES || e->tx_pending < MIN_TXQ_ENTRIES) |
| return -EINVAL; |
| |
| if (adapter->flags & FULL_INIT_DONE) |
| return -EBUSY; |
| |
| for (i = 0; i < pi->nqsets; ++i) { |
| s->ethtxq[pi->first_qset + i].q.size = e->tx_pending; |
| s->ethrxq[pi->first_qset + i].fl.size = e->rx_pending + 8; |
| s->ethrxq[pi->first_qset + i].rspq.size = e->rx_mini_pending; |
| } |
| return 0; |
| } |
| |
| static int closest_timer(const struct sge *s, int time) |
| { |
| int i, delta, match = 0, min_delta = INT_MAX; |
| |
| for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) { |
| delta = time - s->timer_val[i]; |
| if (delta < 0) |
| delta = -delta; |
| if (delta < min_delta) { |
| min_delta = delta; |
| match = i; |
| } |
| } |
| return match; |
| } |
| |
| static int closest_thres(const struct sge *s, int thres) |
| { |
| int i, delta, match = 0, min_delta = INT_MAX; |
| |
| for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) { |
| delta = thres - s->counter_val[i]; |
| if (delta < 0) |
| delta = -delta; |
| if (delta < min_delta) { |
| min_delta = delta; |
| match = i; |
| } |
| } |
| return match; |
| } |
| |
| /* |
| * Return a queue's interrupt hold-off time in us. 0 means no timer. |
| */ |
| static unsigned int qtimer_val(const struct adapter *adap, |
| const struct sge_rspq *q) |
| { |
| unsigned int idx = q->intr_params >> 1; |
| |
| return idx < SGE_NTIMERS ? adap->sge.timer_val[idx] : 0; |
| } |
| |
| /** |
| * set_rxq_intr_params - set a queue's interrupt holdoff parameters |
| * @adap: the adapter |
| * @q: the Rx queue |
| * @us: the hold-off time in us, or 0 to disable timer |
| * @cnt: the hold-off packet count, or 0 to disable counter |
| * |
| * Sets an Rx queue's interrupt hold-off time and packet count. At least |
| * one of the two needs to be enabled for the queue to generate interrupts. |
| */ |
| static int set_rxq_intr_params(struct adapter *adap, struct sge_rspq *q, |
| unsigned int us, unsigned int cnt) |
| { |
| if ((us | cnt) == 0) |
| cnt = 1; |
| |
| if (cnt) { |
| int err; |
| u32 v, new_idx; |
| |
| new_idx = closest_thres(&adap->sge, cnt); |
| if (q->desc && q->pktcnt_idx != new_idx) { |
| /* the queue has already been created, update it */ |
| v = FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) | |
| FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) | |
| FW_PARAMS_PARAM_YZ(q->cntxt_id); |
| err = t4_set_params(adap, adap->fn, adap->fn, 0, 1, &v, |
| &new_idx); |
| if (err) |
| return err; |
| } |
| q->pktcnt_idx = new_idx; |
| } |
| |
| us = us == 0 ? 6 : closest_timer(&adap->sge, us); |
| q->intr_params = QINTR_TIMER_IDX(us) | (cnt > 0 ? QINTR_CNT_EN : 0); |
| return 0; |
| } |
| |
| static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) |
| { |
| const struct port_info *pi = netdev_priv(dev); |
| struct adapter *adap = pi->adapter; |
| |
| return set_rxq_intr_params(adap, &adap->sge.ethrxq[pi->first_qset].rspq, |
| c->rx_coalesce_usecs, c->rx_max_coalesced_frames); |
| } |
| |
| static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) |
| { |
| const struct port_info *pi = netdev_priv(dev); |
| const struct adapter *adap = pi->adapter; |
| const struct sge_rspq *rq = &adap->sge.ethrxq[pi->first_qset].rspq; |
| |
| c->rx_coalesce_usecs = qtimer_val(adap, rq); |
| c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN) ? |
| adap->sge.counter_val[rq->pktcnt_idx] : 0; |
| return 0; |
| } |
| |
| /** |
| * eeprom_ptov - translate a physical EEPROM address to virtual |
| * @phys_addr: the physical EEPROM address |
| * @fn: the PCI function number |
| * @sz: size of function-specific area |
| * |
| * Translate a physical EEPROM address to virtual. The first 1K is |
| * accessed through virtual addresses starting at 31K, the rest is |
| * accessed through virtual addresses starting at 0. |
| * |
| * The mapping is as follows: |
| * [0..1K) -> [31K..32K) |
| * [1K..1K+A) -> [31K-A..31K) |
| * [1K+A..ES) -> [0..ES-A-1K) |
| * |
| * where A = @fn * @sz, and ES = EEPROM size. |
| */ |
| static int eeprom_ptov(unsigned int phys_addr, unsigned int fn, unsigned int sz) |
| { |
| fn *= sz; |
| if (phys_addr < 1024) |
| return phys_addr + (31 << 10); |
| if (phys_addr < 1024 + fn) |
| return 31744 - fn + phys_addr - 1024; |
| if (phys_addr < EEPROMSIZE) |
| return phys_addr - 1024 - fn; |
| return -EINVAL; |
| } |
| |
| /* |
| * The next two routines implement eeprom read/write from physical addresses. |
| */ |
| static int eeprom_rd_phys(struct adapter *adap, unsigned int phys_addr, u32 *v) |
| { |
| int vaddr = eeprom_ptov(phys_addr, adap->fn, EEPROMPFSIZE); |
| |
| if (vaddr >= 0) |
| vaddr = pci_read_vpd(adap->pdev, vaddr, sizeof(u32), v); |
| return vaddr < 0 ? vaddr : 0; |
| } |
| |
| static int eeprom_wr_phys(struct adapter *adap, unsigned int phys_addr, u32 v) |
| { |
| int vaddr = eeprom_ptov(phys_addr, adap->fn, EEPROMPFSIZE); |
| |
| if (vaddr >= 0) |
| vaddr = pci_write_vpd(adap->pdev, vaddr, sizeof(u32), &v); |
| return vaddr < 0 ? vaddr : 0; |
| } |
| |
| #define EEPROM_MAGIC 0x38E2F10C |
| |
| static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, |
| u8 *data) |
| { |
| int i, err = 0; |
| struct adapter *adapter = netdev2adap(dev); |
| |
| u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| e->magic = EEPROM_MAGIC; |
| for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4) |
| err = eeprom_rd_phys(adapter, i, (u32 *)&buf[i]); |
| |
| if (!err) |
| memcpy(data, buf + e->offset, e->len); |
| kfree(buf); |
| return err; |
| } |
| |
| static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, |
| u8 *data) |
| { |
| u8 *buf; |
| int err = 0; |
| u32 aligned_offset, aligned_len, *p; |
| struct adapter *adapter = netdev2adap(dev); |
| |
| if (eeprom->magic != EEPROM_MAGIC) |
| return -EINVAL; |
| |
| aligned_offset = eeprom->offset & ~3; |
| aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3; |
| |
| if (adapter->fn > 0) { |
| u32 start = 1024 + adapter->fn * EEPROMPFSIZE; |
| |
| if (aligned_offset < start || |
| aligned_offset + aligned_len > start + EEPROMPFSIZE) |
| return -EPERM; |
| } |
| |
| if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) { |
| /* |
| * RMW possibly needed for first or last words. |
| */ |
| buf = kmalloc(aligned_len, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| err = eeprom_rd_phys(adapter, aligned_offset, (u32 *)buf); |
| if (!err && aligned_len > 4) |
| err = eeprom_rd_phys(adapter, |
| aligned_offset + aligned_len - 4, |
| (u32 *)&buf[aligned_len - 4]); |
| if (err) |
| goto out; |
| memcpy(buf + (eeprom->offset & 3), data, eeprom->len); |
| } else |
| buf = data; |
| |
| err = t4_seeprom_wp(adapter, false); |
| if (err) |
| goto out; |
| |
| for (p = (u32 *)buf; !err && aligned_len; aligned_len -= 4, p++) { |
| err = eeprom_wr_phys(adapter, aligned_offset, *p); |
| aligned_offset += 4; |
| } |
| |
| if (!err) |
| err = t4_seeprom_wp(adapter, true); |
| out: |
| if (buf != data) |
| kfree(buf); |
| return err; |
| } |
| |
| static int set_flash(struct net_device *netdev, struct ethtool_flash *ef) |
| { |
| int ret; |
| const struct firmware *fw; |
| struct adapter *adap = netdev2adap(netdev); |
| |
| ef->data[sizeof(ef->data) - 1] = '\0'; |
| ret = request_firmware(&fw, ef->data, adap->pdev_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = t4_load_fw(adap, fw->data, fw->size); |
| release_firmware(fw); |
| if (!ret) |
| dev_info(adap->pdev_dev, "loaded firmware %s\n", ef->data); |
| return ret; |
| } |
| |
| #define WOL_SUPPORTED (WAKE_BCAST | WAKE_MAGIC) |
| #define BCAST_CRC 0xa0ccc1a6 |
| |
| static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
| { |
| wol->supported = WAKE_BCAST | WAKE_MAGIC; |
| wol->wolopts = netdev2adap(dev)->wol; |
| memset(&wol->sopass, 0, sizeof(wol->sopass)); |
| } |
| |
| static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
| { |
| int err = 0; |
| struct port_info *pi = netdev_priv(dev); |
| |
| if (wol->wolopts & ~WOL_SUPPORTED) |
| return -EINVAL; |
| t4_wol_magic_enable(pi->adapter, pi->tx_chan, |
| (wol->wolopts & WAKE_MAGIC) ? dev->dev_addr : NULL); |
| if (wol->wolopts & WAKE_BCAST) { |
| err = t4_wol_pat_enable(pi->adapter, pi->tx_chan, 0xfe, ~0ULL, |
| ~0ULL, 0, false); |
| if (!err) |
| err = t4_wol_pat_enable(pi->adapter, pi->tx_chan, 1, |
| ~6ULL, ~0ULL, BCAST_CRC, true); |
| } else |
| t4_wol_pat_enable(pi->adapter, pi->tx_chan, 0, 0, 0, 0, false); |
| return err; |
| } |
| |
| static int cxgb_set_features(struct net_device *dev, netdev_features_t features) |
| { |
| const struct port_info *pi = netdev_priv(dev); |
| netdev_features_t changed = dev->features ^ features; |
| int err; |
| |
| if (!(changed & NETIF_F_HW_VLAN_RX)) |
| return 0; |
| |
| err = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, -1, |
| -1, -1, -1, |
| !!(features & NETIF_F_HW_VLAN_RX), true); |
| if (unlikely(err)) |
| dev->features = features ^ NETIF_F_HW_VLAN_RX; |
| return err; |
| } |
| |
| static u32 get_rss_table_size(struct net_device *dev) |
| { |
| const struct port_info *pi = netdev_priv(dev); |
| |
| return pi->rss_size; |
| } |
| |
| static int get_rss_table(struct net_device *dev, u32 *p) |
| { |
| const struct port_info *pi = netdev_priv(dev); |
| unsigned int n = pi->rss_size; |
| |
| while (n--) |
| p[n] = pi->rss[n]; |
| return 0; |
| } |
| |
| static int set_rss_table(struct net_device *dev, const u32 *p) |
| { |
| unsigned int i; |
| struct port_info *pi = netdev_priv(dev); |
| |
| for (i = 0; i < pi->rss_size; i++) |
| pi->rss[i] = p[i]; |
| if (pi->adapter->flags & FULL_INIT_DONE) |
| return write_rss(pi, pi->rss); |
| return 0; |
| } |
| |
| static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, |
| u32 *rules) |
| { |
| const struct port_info *pi = netdev_priv(dev); |
| |
| switch (info->cmd) { |
| case ETHTOOL_GRXFH: { |
| unsigned int v = pi->rss_mode; |
| |
| info->data = 0; |
| switch (info->flow_type) { |
| case TCP_V4_FLOW: |
| if (v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN) |
| info->data = RXH_IP_SRC | RXH_IP_DST | |
| RXH_L4_B_0_1 | RXH_L4_B_2_3; |
| else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) |
| info->data = RXH_IP_SRC | RXH_IP_DST; |
| break; |
| case UDP_V4_FLOW: |
| if ((v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN) && |
| (v & FW_RSS_VI_CONFIG_CMD_UDPEN)) |
| info->data = RXH_IP_SRC | RXH_IP_DST | |
| RXH_L4_B_0_1 | RXH_L4_B_2_3; |
| else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) |
| info->data = RXH_IP_SRC | RXH_IP_DST; |
| break; |
| case SCTP_V4_FLOW: |
| case AH_ESP_V4_FLOW: |
| case IPV4_FLOW: |
| if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) |
| info->data = RXH_IP_SRC | RXH_IP_DST; |
| break; |
| case TCP_V6_FLOW: |
| if (v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN) |
| info->data = RXH_IP_SRC | RXH_IP_DST | |
| RXH_L4_B_0_1 | RXH_L4_B_2_3; |
| else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) |
| info->data = RXH_IP_SRC | RXH_IP_DST; |
| break; |
| case UDP_V6_FLOW: |
| if ((v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN) && |
| (v & FW_RSS_VI_CONFIG_CMD_UDPEN)) |
| info->data = RXH_IP_SRC | RXH_IP_DST | |
| RXH_L4_B_0_1 | RXH_L4_B_2_3; |
| else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) |
| info->data = RXH_IP_SRC | RXH_IP_DST; |
| break; |
| case SCTP_V6_FLOW: |
| case AH_ESP_V6_FLOW: |
| case IPV6_FLOW: |
| if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) |
| info->data = RXH_IP_SRC | RXH_IP_DST; |
| break; |
| } |
| return 0; |
| } |
| case ETHTOOL_GRXRINGS: |
| info->data = pi->nqsets; |
| return 0; |
| } |
| return -EOPNOTSUPP; |
| } |
| |
| static const struct ethtool_ops cxgb_ethtool_ops = { |
| .get_settings = get_settings, |
| .set_settings = set_settings, |
| .get_drvinfo = get_drvinfo, |
| .get_msglevel = get_msglevel, |
| .set_msglevel = set_msglevel, |
| .get_ringparam = get_sge_param, |
| .set_ringparam = set_sge_param, |
| .get_coalesce = get_coalesce, |
| .set_coalesce = set_coalesce, |
| .get_eeprom_len = get_eeprom_len, |
| .get_eeprom = get_eeprom, |
| .set_eeprom = set_eeprom, |
| .get_pauseparam = get_pauseparam, |
| .set_pauseparam = set_pauseparam, |
| .get_link = ethtool_op_get_link, |
| .get_strings = get_strings, |
| .set_phys_id = identify_port, |
| .nway_reset = restart_autoneg, |
| .get_sset_count = get_sset_count, |
| .get_ethtool_stats = get_stats, |
| .get_regs_len = get_regs_len, |
| .get_regs = get_regs, |
| .get_wol = get_wol, |
| .set_wol = set_wol, |
| .get_rxnfc = get_rxnfc, |
| .get_rxfh_indir_size = get_rss_table_size, |
| .get_rxfh_indir = get_rss_table, |
| .set_rxfh_indir = set_rss_table, |
| .flash_device = set_flash, |
| }; |
| |
| /* |
| * debugfs support |
| */ |
| |
| static int mem_open(struct inode *inode, struct file *file) |
| { |
| file->private_data = inode->i_private; |
| return 0; |
| } |
| |
| static ssize_t mem_read(struct file *file, char __user *buf, size_t count, |
| loff_t *ppos) |
| { |
| loff_t pos = *ppos; |
| loff_t avail = file->f_path.dentry->d_inode->i_size; |
| unsigned int mem = (uintptr_t)file->private_data & 3; |
| struct adapter *adap = file->private_data - mem; |
| |
| if (pos < 0) |
| return -EINVAL; |
| if (pos >= avail) |
| return 0; |
| if (count > avail - pos) |
| count = avail - pos; |
| |
| while (count) { |
| size_t len; |
| int ret, ofst; |
| __be32 data[16]; |
| |
| if (mem == MEM_MC) |
| ret = t4_mc_read(adap, pos, data, NULL); |
| else |
| ret = t4_edc_read(adap, mem, pos, data, NULL); |
| if (ret) |
| return ret; |
| |
| ofst = pos % sizeof(data); |
| len = min(count, sizeof(data) - ofst); |
| if (copy_to_user(buf, (u8 *)data + ofst, len)) |
| return -EFAULT; |
| |
| buf += len; |
| pos += len; |
| count -= len; |
| } |
| count = pos - *ppos; |
| *ppos = pos; |
| return count; |
| } |
| |
| static const struct file_operations mem_debugfs_fops = { |
| .owner = THIS_MODULE, |
| .open = mem_open, |
| .read = mem_read, |
| .llseek = default_llseek, |
| }; |
| |
| static void __devinit add_debugfs_mem(struct adapter *adap, const char *name, |
| unsigned int idx, unsigned int size_mb) |
| { |
| struct dentry *de; |
| |
| de = debugfs_create_file(name, S_IRUSR, adap->debugfs_root, |
| (void *)adap + idx, &mem_debugfs_fops); |
| if (de && de->d_inode) |
| de->d_inode->i_size = size_mb << 20; |
| } |
| |
| static int __devinit setup_debugfs(struct adapter *adap) |
| { |
| int i; |
| |
| if (IS_ERR_OR_NULL(adap->debugfs_root)) |
| return -1; |
| |
| i = t4_read_reg(adap, MA_TARGET_MEM_ENABLE); |
| if (i & EDRAM0_ENABLE) |
| add_debugfs_mem(adap, "edc0", MEM_EDC0, 5); |
| if (i & EDRAM1_ENABLE) |
| add_debugfs_mem(adap, "edc1", MEM_EDC1, 5); |
| if (i & EXT_MEM_ENABLE) |
| add_debugfs_mem(adap, "mc", MEM_MC, |
| EXT_MEM_SIZE_GET(t4_read_reg(adap, MA_EXT_MEMORY_BAR))); |
| if (adap->l2t) |
| debugfs_create_file("l2t", S_IRUSR, adap->debugfs_root, adap, |
| &t4_l2t_fops); |
| return 0; |
| } |
| |
| /* |
| * upper-layer driver support |
| */ |
| |
| /* |
| * Allocate an active-open TID and set it to the supplied value. |
| */ |
| int cxgb4_alloc_atid(struct tid_info *t, void *data) |
| { |
| int atid = -1; |
| |
| spin_lock_bh(&t->atid_lock); |
| if (t->afree) { |
| union aopen_entry *p = t->afree; |
| |
| atid = p - t->atid_tab; |
| t->afree = p->next; |
| p->data = data; |
| t->atids_in_use++; |
| } |
| spin_unlock_bh(&t->atid_lock); |
| return atid; |
| } |
| EXPORT_SYMBOL(cxgb4_alloc_atid); |
| |
| /* |
| * Release an active-open TID. |
| */ |
| void cxgb4_free_atid(struct tid_info *t, unsigned int atid) |
| { |
| union aopen_entry *p = &t->atid_tab[atid]; |
| |
| spin_lock_bh(&t->atid_lock); |
| p->next = t->afree; |
| t->afree = p; |
| t->atids_in_use--; |
| spin_unlock_bh(&t->atid_lock); |
| } |
| EXPORT_SYMBOL(cxgb4_free_atid); |
| |
| /* |
| * Allocate a server TID and set it to the supplied value. |
| */ |
| int cxgb4_alloc_stid(struct tid_info *t, int family, void *data) |
| { |
| int stid; |
| |
| spin_lock_bh(&t->stid_lock); |
| if (family == PF_INET) { |
| stid = find_first_zero_bit(t->stid_bmap, t->nstids); |
| if (stid < t->nstids) |
| __set_bit(stid, t->stid_bmap); |
| else |
| stid = -1; |
| } else { |
| stid = bitmap_find_free_region(t->stid_bmap, t->nstids, 2); |
| if (stid < 0) |
| stid = -1; |
| } |
| if (stid >= 0) { |
| t->stid_tab[stid].data = data; |
| stid += t->stid_base; |
| t->stids_in_use++; |
| } |
| spin_unlock_bh(&t->stid_lock); |
| return stid; |
| } |
| EXPORT_SYMBOL(cxgb4_alloc_stid); |
| |
| /* |
| * Release a server TID. |
| */ |
| void cxgb4_free_stid(struct tid_info *t, unsigned int stid, int family) |
| { |
| stid -= t->stid_base; |
| spin_lock_bh(&t->stid_lock); |
| if (family == PF_INET) |
| __clear_bit(stid, t->stid_bmap); |
| else |
| bitmap_release_region(t->stid_bmap, stid, 2); |
| t->stid_tab[stid].data = NULL; |
| t->stids_in_use--; |
| spin_unlock_bh(&t->stid_lock); |
| } |
| EXPORT_SYMBOL(cxgb4_free_stid); |
| |
| /* |
| * Populate a TID_RELEASE WR. Caller must properly size the skb. |
| */ |
| static void mk_tid_release(struct sk_buff *skb, unsigned int chan, |
| unsigned int tid) |
| { |
| struct cpl_tid_release *req; |
| |
| set_wr_txq(skb, CPL_PRIORITY_SETUP, chan); |
| req = (struct cpl_tid_release *)__skb_put(skb, sizeof(*req)); |
| INIT_TP_WR(req, tid); |
| OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, tid)); |
| } |
| |
| /* |
| * Queue a TID release request and if necessary schedule a work queue to |
| * process it. |
| */ |
| static void cxgb4_queue_tid_release(struct tid_info *t, unsigned int chan, |
| unsigned int tid) |
| { |
| void **p = &t->tid_tab[tid]; |
| struct adapter *adap = container_of(t, struct adapter, tids); |
| |
| spin_lock_bh(&adap->tid_release_lock); |
| *p = adap->tid_release_head; |
| /* Low 2 bits encode the Tx channel number */ |
| adap->tid_release_head = (void **)((uintptr_t)p | chan); |
| if (!adap->tid_release_task_busy) { |
| adap->tid_release_task_busy = true; |
| schedule_work(&adap->tid_release_task); |
| } |
| spin_unlock_bh(&adap->tid_release_lock); |
| } |
| |
| /* |
| * Process the list of pending TID release requests. |
| */ |
| static void process_tid_release_list(struct work_struct *work) |
| { |
| struct sk_buff *skb; |
| struct adapter *adap; |
| |
| adap = container_of(work, struct adapter, tid_release_task); |
| |
| spin_lock_bh(&adap->tid_release_lock); |
| while (adap->tid_release_head) { |
| void **p = adap->tid_release_head; |
| unsigned int chan = (uintptr_t)p & 3; |
| p = (void *)p - chan; |
| |
| adap->tid_release_head = *p; |
| *p = NULL; |
| spin_unlock_bh(&adap->tid_release_lock); |
| |
| while (!(skb = alloc_skb(sizeof(struct cpl_tid_release), |
| GFP_KERNEL))) |
| schedule_timeout_uninterruptible(1); |
| |
| mk_tid_release(skb, chan, p - adap->tids.tid_tab); |
| t4_ofld_send(adap, skb); |
| spin_lock_bh(&adap->tid_release_lock); |
| } |
| adap->tid_release_task_busy = false; |
| spin_unlock_bh(&adap->tid_release_lock); |
| } |
| |
| /* |
| * Release a TID and inform HW. If we are unable to allocate the release |
| * message we defer to a work queue. |
| */ |
| void cxgb4_remove_tid(struct tid_info *t, unsigned int chan, unsigned int tid) |
| { |
| void *old; |
| struct sk_buff *skb; |
| struct adapter *adap = container_of(t, struct adapter, tids); |
| |
| old = t->tid_tab[tid]; |
| skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC); |
| if (likely(skb)) { |
| t->tid_tab[tid] = NULL; |
| mk_tid_release(skb, chan, tid); |
| t4_ofld_send(adap, skb); |
| } else |
| cxgb4_queue_tid_release(t, chan, tid); |
| if (old) |
| atomic_dec(&t->tids_in_use); |
| } |
| EXPORT_SYMBOL(cxgb4_remove_tid); |
| |
| /* |
| * Allocate and initialize the TID tables. Returns 0 on success. |
| */ |
| static int tid_init(struct tid_info *t) |
| { |
| size_t size; |
| unsigned int natids = t->natids; |
| |
| size = t->ntids * sizeof(*t->tid_tab) + natids * sizeof(*t->atid_tab) + |
| t->nstids * sizeof(*t->stid_tab) + |
| BITS_TO_LONGS(t->nstids) * sizeof(long); |
| t->tid_tab = t4_alloc_mem(size); |
| if (!t->tid_tab) |
| return -ENOMEM; |
| |
| t->atid_tab = (union aopen_entry *)&t->tid_tab[t->ntids]; |
| t->stid_tab = (struct serv_entry *)&t->atid_tab[natids]; |
| t->stid_bmap = (unsigned long *)&t->stid_tab[t->nstids]; |
| spin_lock_init(&t->stid_lock); |
| spin_lock_init(&t->atid_lock); |
| |
| t->stids_in_use = 0; |
| t->afree = NULL; |
| t->atids_in_use = 0; |
| atomic_set(&t->tids_in_use, 0); |
| |
| /* Setup the free list for atid_tab and clear the stid bitmap. */ |
| if (natids) { |
| while (--natids) |
| t->atid_tab[natids - 1].next = &t->atid_tab[natids]; |
| t->afree = t->atid_tab; |
| } |
| bitmap_zero(t->stid_bmap, t->nstids); |
| return 0; |
| } |
| |
| /** |
| * cxgb4_create_server - create an IP server |
| * @dev: the device |
| * @stid: the server TID |
| * @sip: local IP address to bind server to |
| * @sport: the server's TCP port |
| * @queue: queue to direct messages from this server to |
| * |
| * Create an IP server for the given port and address. |
| * Returns <0 on error and one of the %NET_XMIT_* values on success. |
| */ |
| int cxgb4_create_server(const struct net_device *dev, unsigned int stid, |
| __be32 sip, __be16 sport, unsigned int queue) |
| { |
| unsigned int chan; |
| struct sk_buff *skb; |
| struct adapter *adap; |
| struct cpl_pass_open_req *req; |
| |
| skb = alloc_skb(sizeof(*req), GFP_KERNEL); |
| if (!skb) |
| return -ENOMEM; |
| |
| adap = netdev2adap(dev); |
| req = (struct cpl_pass_open_req *)__skb_put(skb, sizeof(*req)); |
| INIT_TP_WR(req, 0); |
| OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ, stid)); |
| req->local_port = sport; |
| req->peer_port = htons(0); |
| req->local_ip = sip; |
| req->peer_ip = htonl(0); |
| chan = rxq_to_chan(&adap->sge, queue); |
| req->opt0 = cpu_to_be64(TX_CHAN(chan)); |
| req->opt1 = cpu_to_be64(CONN_POLICY_ASK | |
| SYN_RSS_ENABLE | SYN_RSS_QUEUE(queue)); |
| return t4_mgmt_tx(adap, skb); |
| } |
| EXPORT_SYMBOL(cxgb4_create_server); |
| |
| /** |
| * cxgb4_best_mtu - find the entry in the MTU table closest to an MTU |
| * @mtus: the HW MTU table |
| * @mtu: the target MTU |
| * @idx: index of selected entry in the MTU table |
| * |
| * Returns the index and the value in the HW MTU table that is closest to |
| * but does not exceed @mtu, unless @mtu is smaller than any value in the |
| * table, in which case that smallest available value is selected. |
| */ |
| unsigned int cxgb4_best_mtu(const unsigned short *mtus, unsigned short mtu, |
| unsigned int *idx) |
| { |
| unsigned int i = 0; |
| |
| while (i < NMTUS - 1 && mtus[i + 1] <= mtu) |
| ++i; |
| if (idx) |
| *idx = i; |
| return mtus[i]; |
| } |
| EXPORT_SYMBOL(cxgb4_best_mtu); |
| |
| /** |
| * cxgb4_port_chan - get the HW channel of a port |
| * @dev: the net device for the port |
| * |
| * Return the HW Tx channel of the given port. |
| */ |
| unsigned int cxgb4_port_chan(const struct net_device *dev) |
| { |
| return netdev2pinfo(dev)->tx_chan; |
| } |
| EXPORT_SYMBOL(cxgb4_port_chan); |
| |
| /** |
| * cxgb4_port_viid - get the VI id of a port |
| * @dev: the net device for the port |
| * |
| * Return the VI id of the given port. |
| */ |
| unsigned int cxgb4_port_viid(const struct net_device *dev) |
| { |
| return netdev2pinfo(dev)->viid; |
| } |
| EXPORT_SYMBOL(cxgb4_port_viid); |
| |
| /** |
| * cxgb4_port_idx - get the index of a port |
| * @dev: the net device for the port |
| * |
| * Return the index of the given port. |
| */ |
| unsigned int cxgb4_port_idx(const struct net_device *dev) |
| { |
| return netdev2pinfo(dev)->port_id; |
| } |
| EXPORT_SYMBOL(cxgb4_port_idx); |
| |
| void cxgb4_get_tcp_stats(struct pci_dev *pdev, struct tp_tcp_stats *v4, |
| struct tp_tcp_stats *v6) |
| { |
| struct adapter *adap = pci_get_drvdata(pdev); |
| |
| spin_lock(&adap->stats_lock); |
| t4_tp_get_tcp_stats(adap, v4, v6); |
| spin_unlock(&adap->stats_lock); |
| } |
| EXPORT_SYMBOL(cxgb4_get_tcp_stats); |
| |
| void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask, |
| const unsigned int *pgsz_order) |
| { |
| struct adapter *adap = netdev2adap(dev); |
| |
| t4_write_reg(adap, ULP_RX_ISCSI_TAGMASK, tag_mask); |
| t4_write_reg(adap, ULP_RX_ISCSI_PSZ, HPZ0(pgsz_order[0]) | |
| HPZ1(pgsz_order[1]) | HPZ2(pgsz_order[2]) | |
| HPZ3(pgsz_order[3])); |
| } |
| EXPORT_SYMBOL(cxgb4_iscsi_init); |
| |
| static struct pci_driver cxgb4_driver; |
| |
| static void check_neigh_update(struct neighbour *neigh) |
| { |
| const struct device *parent; |
| const struct net_device *netdev = neigh->dev; |
| |
| if (netdev->priv_flags & IFF_802_1Q_VLAN) |
| netdev = vlan_dev_real_dev(netdev); |
| parent = netdev->dev.parent; |
| if (parent && parent->driver == &cxgb4_driver.driver) |
| t4_l2t_update(dev_get_drvdata(parent), neigh); |
| } |
| |
| static int netevent_cb(struct notifier_block *nb, unsigned long event, |
| void *data) |
| { |
| switch (event) { |
| case NETEVENT_NEIGH_UPDATE: |
| check_neigh_update(data); |
| break; |
| case NETEVENT_REDIRECT: |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| static bool netevent_registered; |
| static struct notifier_block cxgb4_netevent_nb = { |
| .notifier_call = netevent_cb |
| }; |
| |
| static void uld_attach(struct adapter *adap, unsigned int uld) |
| { |
| void *handle; |
| struct cxgb4_lld_info lli; |
| |
| lli.pdev = adap->pdev; |
| lli.l2t = adap->l2t; |
| lli.tids = &adap->tids; |
| lli.ports = adap->port; |
| lli.vr = &adap->vres; |
| lli.mtus = adap->params.mtus; |
| if (uld == CXGB4_ULD_RDMA) { |
| lli.rxq_ids = adap->sge.rdma_rxq; |
| lli.nrxq = adap->sge.rdmaqs; |
| } else if (uld == CXGB4_ULD_ISCSI) { |
| lli.rxq_ids = adap->sge.ofld_rxq; |
| lli.nrxq = adap->sge.ofldqsets; |
| } |
| lli.ntxq = adap->sge.ofldqsets; |
| lli.nchan = adap->params.nports; |
| lli.nports = adap->params.nports; |
| lli.wr_cred = adap->params.ofldq_wr_cred; |
| lli.adapter_type = adap->params.rev; |
| lli.iscsi_iolen = MAXRXDATA_GET(t4_read_reg(adap, TP_PARA_REG2)); |
| lli.udb_density = 1 << QUEUESPERPAGEPF0_GET( |
| t4_read_reg(adap, SGE_EGRESS_QUEUES_PER_PAGE_PF) >> |
| (adap->fn * 4)); |
| lli.ucq_density = 1 << QUEUESPERPAGEPF0_GET( |
| t4_read_reg(adap, SGE_INGRESS_QUEUES_PER_PAGE_PF) >> |
| (adap->fn * 4)); |
| lli.gts_reg = adap->regs + MYPF_REG(SGE_PF_GTS); |
| lli.db_reg = adap->regs + MYPF_REG(SGE_PF_KDOORBELL); |
| lli.fw_vers = adap->params.fw_vers; |
| |
| handle = ulds[uld].add(&lli); |
| if (IS_ERR(handle)) { |
| dev_warn(adap->pdev_dev, |
| "could not attach to the %s driver, error %ld\n", |
| uld_str[uld], PTR_ERR(handle)); |
| return; |
| } |
| |
| adap->uld_handle[uld] = handle; |
| |
| if (!netevent_registered) { |
| register_netevent_notifier(&cxgb4_netevent_nb); |
| netevent_registered = true; |
| } |
| |
| if (adap->flags & FULL_INIT_DONE) |
| ulds[uld].state_change(handle, CXGB4_STATE_UP); |
| } |
| |
| static void attach_ulds(struct adapter *adap) |
| { |
| unsigned int i; |
| |
| mutex_lock(&uld_mutex); |
| list_add_tail(&adap->list_node, &adapter_list); |
| for (i = 0; i < CXGB4_ULD_MAX; i++) |
| if (ulds[i].add) |
| uld_attach(adap, i); |
| mutex_unlock(&uld_mutex); |
| } |
| |
| static void detach_ulds(struct adapter *adap) |
| { |
| unsigned int i; |
| |
| mutex_lock(&uld_mutex); |
| list_del(&adap->list_node); |
| for (i = 0; i < CXGB4_ULD_MAX; i++) |
| if (adap->uld_handle[i]) { |
| ulds[i].state_change(adap->uld_handle[i], |
| CXGB4_STATE_DETACH); |
| adap->uld_handle[i] = NULL; |
| } |
| if (netevent_registered && list_empty(&adapter_list)) { |
| unregister_netevent_notifier(&cxgb4_netevent_nb); |
| netevent_registered = false; |
| } |
| mutex_unlock(&uld_mutex); |
| } |
| |
| static void notify_ulds(struct adapter *adap, enum cxgb4_state new_state) |
| { |
| unsigned int i; |
| |
| mutex_lock(&uld_mutex); |
| for (i = 0; i < CXGB4_ULD_MAX; i++) |
| if (adap->uld_handle[i]) |
| ulds[i].state_change(adap->uld_handle[i], new_state); |
| mutex_unlock(&uld_mutex); |
| } |
| |
| /** |
| * cxgb4_register_uld - register an upper-layer driver |
| * @type: the ULD type |
| * @p: the ULD methods |
| * |
| * Registers an upper-layer driver with this driver and notifies the ULD |
| * about any presently available devices that support its type. Returns |
| * %-EBUSY if a ULD of the same type is already registered. |
| */ |
| int cxgb4_register_uld(enum cxgb4_uld type, const struct cxgb4_uld_info *p) |
| { |
| int ret = 0; |
| struct adapter *adap; |
| |
| if (type >= CXGB4_ULD_MAX) |
| return -EINVAL; |
| mutex_lock(&uld_mutex); |
| if (ulds[type].add) { |
| ret = -EBUSY; |
| goto out; |
| } |
| ulds[type] = *p; |
| list_for_each_entry(adap, &adapter_list, list_node) |
| uld_attach(adap, type); |
| out: mutex_unlock(&uld_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(cxgb4_register_uld); |
| |
| /** |
| * cxgb4_unregister_uld - unregister an upper-layer driver |
| * @type: the ULD type |
| * |
| * Unregisters an existing upper-layer driver. |
| */ |
| int cxgb4_unregister_uld(enum cxgb4_uld type) |
| { |
| struct adapter *adap; |
| |
| if (type >= CXGB4_ULD_MAX) |
| return -EINVAL; |
| mutex_lock(&uld_mutex); |
| list_for_each_entry(adap, &adapter_list, list_node) |
| adap->uld_handle[type] = NULL; |
| ulds[type].add = NULL; |
| mutex_unlock(&uld_mutex); |
| return 0; |
| } |
| EXPORT_SYMBOL(cxgb4_unregister_uld); |
| |
| /** |
| * cxgb_up - enable the adapter |
| * @adap: adapter being enabled |
| * |
| * Called when the first port is enabled, this function performs the |
| * actions necessary to make an adapter operational, such as completing |
| * the initialization of HW modules, and enabling interrupts. |
| * |
| * Must be called with the rtnl lock held. |
| */ |
| static int cxgb_up(struct adapter *adap) |
| { |
| int err; |
| |
| err = setup_sge_queues(adap); |
| if (err) |
| goto out; |
| err = setup_rss(adap); |
| if (err) |
| goto freeq; |
| |
| if (adap->flags & USING_MSIX) { |
| name_msix_vecs(adap); |
| err = request_irq(adap->msix_info[0].vec, t4_nondata_intr, 0, |
| adap->msix_info[0].desc, adap); |
| if (err) |
| goto irq_err; |
| |
| err = request_msix_queue_irqs(adap); |
| if (err) { |
| free_irq(adap->msix_info[0].vec, adap); |
| goto irq_err; |
| } |
| } else { |
| err = request_irq(adap->pdev->irq, t4_intr_handler(adap), |
| (adap->flags & USING_MSI) ? 0 : IRQF_SHARED, |
| adap->port[0]->name, adap); |
| if (err) |
| goto irq_err; |
| } |
| enable_rx(adap); |
| t4_sge_start(adap); |
| t4_intr_enable(adap); |
| adap->flags |= FULL_INIT_DONE; |
| notify_ulds(adap, CXGB4_STATE_UP); |
| out: |
| return err; |
| irq_err: |
| dev_err(adap->pdev_dev, "request_irq failed, err %d\n", err); |
| freeq: |
| t4_free_sge_resources(adap); |
| goto out; |
| } |
| |
| static void cxgb_down(struct adapter *adapter) |
| { |
| t4_intr_disable(adapter); |
| cancel_work_sync(&adapter->tid_release_task); |
| adapter->tid_release_task_busy = false; |
| adapter->tid_release_head = NULL; |
| |
| if (adapter->flags & USING_MSIX) { |
| free_msix_queue_irqs(adapter); |
| free_irq(adapter->msix_info[0].vec, adapter); |
| } else |
| free_irq(adapter->pdev->irq, adapter); |
| quiesce_rx(adapter); |
| t4_sge_stop(adapter); |
| t4_free_sge_resources(adapter); |
| adapter->flags &= ~FULL_INIT_DONE; |
| } |
| |
| /* |
| * net_device operations |
| */ |
| static int cxgb_open(struct net_device *dev) |
| { |
| int err; |
| struct port_info *pi = netdev_priv(dev); |
| struct adapter *adapter = pi->adapter; |
| |
| netif_carrier_off(dev); |
| |
| if (!(adapter->flags & FULL_INIT_DONE)) { |
| err = cxgb_up(adapter); |
| if (err < 0) |
| return err; |
| } |
| |
| err = link_start(dev); |
| if (!err) |
| netif_tx_start_all_queues(dev); |
| return err; |
| } |
| |
| static int cxgb_close(struct net_device *dev) |
| { |
| struct port_info *pi = netdev_priv(dev); |
| struct adapter *adapter = pi->adapter; |
| |
| netif_tx_stop_all_queues(dev); |
| netif_carrier_off(dev); |
| return t4_enable_vi(adapter, adapter->fn, pi->viid, false, false); |
| } |
| |
| static struct rtnl_link_stats64 *cxgb_get_stats(struct net_device *dev, |
| struct rtnl_link_stats64 *ns) |
| { |
| struct port_stats stats; |
| struct port_info *p = netdev_priv(dev); |
| struct adapter *adapter = p->adapter; |
| |
| spin_lock(&adapter->stats_lock); |
| t4_get_port_stats(adapter, p->tx_chan, &stats); |
| spin_unlock(&adapter->stats_lock); |
| |
| ns->tx_bytes = stats.tx_octets; |
| ns->tx_packets = stats.tx_frames; |
| ns->rx_bytes = stats.rx_octets; |
| ns->rx_packets = stats.rx_frames; |
| ns->multicast = stats.rx_mcast_frames; |
| |
| /* detailed rx_errors */ |
| ns->rx_length_errors = stats.rx_jabber + stats.rx_too_long + |
| stats.rx_runt; |
| ns->rx_over_errors = 0; |
| ns->rx_crc_errors = stats.rx_fcs_err; |
| ns->rx_frame_errors = stats.rx_symbol_err; |
| ns->rx_fifo_errors = stats.rx_ovflow0 + stats.rx_ovflow1 + |
| stats.rx_ovflow2 + stats.rx_ovflow3 + |
| stats.rx_trunc0 + stats.rx_trunc1 + |
| stats.rx_trunc2 + stats.rx_trunc3; |
| ns->rx_missed_errors = 0; |
| |
| /* detailed tx_errors */ |
| ns->tx_aborted_errors = 0; |
| ns->tx_carrier_errors = 0; |
| ns->tx_fifo_errors = 0; |
| ns->tx_heartbeat_errors = 0; |
| ns->tx_window_errors = 0; |
| |
| ns->tx_errors = stats.tx_error_frames; |
| ns->rx_errors = stats.rx_symbol_err + stats.rx_fcs_err + |
| ns->rx_length_errors + stats.rx_len_err + ns->rx_fifo_errors; |
| return ns; |
| } |
| |
| static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd) |
| { |
| unsigned int mbox; |
| int ret = 0, prtad, devad; |
| struct port_info *pi = netdev_priv(dev); |
| struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; |
| |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| if (pi->mdio_addr < 0) |
| return -EOPNOTSUPP; |
| data->phy_id = pi->mdio_addr; |
| break; |
| case SIOCGMIIREG: |
| case SIOCSMIIREG: |
| if (mdio_phy_id_is_c45(data->phy_id)) { |
| prtad = mdio_phy_id_prtad(data->phy_id); |
| devad = mdio_phy_id_devad(data->phy_id); |
| } else if (data->phy_id < 32) { |
| prtad = data->phy_id; |
| devad = 0; |
| data->reg_num &= 0x1f; |
| } else |
| return -EINVAL; |
| |
| mbox = pi->adapter->fn; |
| if (cmd == SIOCGMIIREG) |
| ret = t4_mdio_rd(pi->adapter, mbox, prtad, devad, |
| data->reg_num, &data->val_out); |
| else |
| ret = t4_mdio_wr(pi->adapter, mbox, prtad, devad, |
| data->reg_num, data->val_in); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return ret; |
| } |
| |
| static void cxgb_set_rxmode(struct net_device *dev) |
| { |
| /* unfortunately we can't return errors to the stack */ |
| set_rxmode(dev, -1, false); |
| } |
| |
| static int cxgb_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| int ret; |
| struct port_info *pi = netdev_priv(dev); |
| |
| if (new_mtu < 81 || new_mtu > MAX_MTU) /* accommodate SACK */ |
| return -EINVAL; |
| ret = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, new_mtu, -1, |
| -1, -1, -1, true); |
| if (!ret) |
| dev->mtu = new_mtu; |
| return ret; |
| } |
| |
| static int cxgb_set_mac_addr(struct net_device *dev, void *p) |
| { |
| int ret; |
| struct sockaddr *addr = p; |
| struct port_info *pi = netdev_priv(dev); |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| ret = t4_change_mac(pi->adapter, pi->adapter->fn, pi->viid, |
| pi->xact_addr_filt, addr->sa_data, true, true); |
| if (ret < 0) |
| return ret; |
| |
| memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); |
| pi->xact_addr_filt = ret; |
| return 0; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void cxgb_netpoll(struct net_device *dev) |
| { |
| struct port_info *pi = netdev_priv(dev); |
| struct adapter *adap = pi->adapter; |
| |
| if (adap->flags & USING_MSIX) { |
| int i; |
| struct sge_eth_rxq *rx = &adap->sge.ethrxq[pi->first_qset]; |
| |
| for (i = pi->nqsets; i; i--, rx++) |
| t4_sge_intr_msix(0, &rx->rspq); |
| } else |
| t4_intr_handler(adap)(0, adap); |
| } |
| #endif |
| |
| static const struct net_device_ops cxgb4_netdev_ops = { |
| .ndo_open = cxgb_open, |
| .ndo_stop = cxgb_close, |
| .ndo_start_xmit = t4_eth_xmit, |
| .ndo_get_stats64 = cxgb_get_stats, |
| .ndo_set_rx_mode = cxgb_set_rxmode, |
| .ndo_set_mac_address = cxgb_set_mac_addr, |
| .ndo_set_features = cxgb_set_features, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_do_ioctl = cxgb_ioctl, |
| .ndo_change_mtu = cxgb_change_mtu, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = cxgb_netpoll, |
| #endif |
| }; |
| |
| void t4_fatal_err(struct adapter *adap) |
| { |
| t4_set_reg_field(adap, SGE_CONTROL, GLOBALENABLE, 0); |
| t4_intr_disable(adap); |
| dev_alert(adap->pdev_dev, "encountered fatal error, adapter stopped\n"); |
| } |
| |
| static void setup_memwin(struct adapter *adap) |
| { |
| u32 bar0; |
| |
| bar0 = pci_resource_start(adap->pdev, 0); /* truncation intentional */ |
| t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 0), |
| (bar0 + MEMWIN0_BASE) | BIR(0) | |
| WINDOW(ilog2(MEMWIN0_APERTURE) - 10)); |
| t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 1), |
| (bar0 + MEMWIN1_BASE) | BIR(0) | |
| WINDOW(ilog2(MEMWIN1_APERTURE) - 10)); |
| t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2), |
| (bar0 + MEMWIN2_BASE) | BIR(0) | |
| WINDOW(ilog2(MEMWIN2_APERTURE) - 10)); |
| if (adap->vres.ocq.size) { |
| unsigned int start, sz_kb; |
| |
| start = pci_resource_start(adap->pdev, 2) + |
| OCQ_WIN_OFFSET(adap->pdev, &adap->vres); |
| sz_kb = roundup_pow_of_two(adap->vres.ocq.size) >> 10; |
| t4_write_reg(adap, |
| PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 3), |
| start | BIR(1) | WINDOW(ilog2(sz_kb))); |
| t4_write_reg(adap, |
| PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, 3), |
| adap->vres.ocq.start); |
| t4_read_reg(adap, |
| PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, 3)); |
| } |
| } |
| |
| static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c) |
| { |
| u32 v; |
| int ret; |
| |
| /* get device capabilities */ |
| memset(c, 0, sizeof(*c)); |
| c->op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | |
| FW_CMD_REQUEST | FW_CMD_READ); |
| c->retval_len16 = htonl(FW_LEN16(*c)); |
| ret = t4_wr_mbox(adap, adap->fn, c, sizeof(*c), c); |
| if (ret < 0) |
| return ret; |
| |
| /* select capabilities we'll be using */ |
| if (c->niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) { |
| if (!vf_acls) |
| c->niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM); |
| else |
| c->niccaps = htons(FW_CAPS_CONFIG_NIC_VM); |
| } else if (vf_acls) { |
| dev_err(adap->pdev_dev, "virtualization ACLs not supported"); |
| return ret; |
| } |
| c->op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | |
| FW_CMD_REQUEST | FW_CMD_WRITE); |
| ret = t4_wr_mbox(adap, adap->fn, c, sizeof(*c), NULL); |
| if (ret < 0) |
| return ret; |
| |
| ret = t4_config_glbl_rss(adap, adap->fn, |
| FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL, |
| FW_RSS_GLB_CONFIG_CMD_TNLMAPEN | |
| FW_RSS_GLB_CONFIG_CMD_TNLALLLKP); |
| if (ret < 0) |
| return ret; |
| |
| ret = t4_cfg_pfvf(adap, adap->fn, adap->fn, 0, MAX_EGRQ, 64, MAX_INGQ, |
| 0, 0, 4, 0xf, 0xf, 16, FW_CMD_CAP_PF, FW_CMD_CAP_PF); |
| if (ret < 0) |
| return ret; |
| |
| t4_sge_init(adap); |
| |
| /* tweak some settings */ |
| t4_write_reg(adap, TP_SHIFT_CNT, 0x64f8849); |
| t4_write_reg(adap, ULP_RX_TDDP_PSZ, HPZ0(PAGE_SHIFT - 12)); |
| t4_write_reg(adap, TP_PIO_ADDR, TP_INGRESS_CONFIG); |
| v = t4_read_reg(adap, TP_PIO_DATA); |
| t4_write_reg(adap, TP_PIO_DATA, v & ~CSUM_HAS_PSEUDO_HDR); |
| |
| /* get basic stuff going */ |
| return t4_early_init(adap, adap->fn); |
| } |
| |
| /* |
| * Max # of ATIDs. The absolute HW max is 16K but we keep it lower. |
| */ |
| #define MAX_ATIDS 8192U |
| |
| /* |
| * Phase 0 of initialization: contact FW, obtain config, perform basic init. |
| */ |
| static int adap_init0(struct adapter *adap) |
| { |
| int ret; |
| u32 v, port_vec; |
| enum dev_state state; |
| u32 params[7], val[7]; |
| struct fw_caps_config_cmd c; |
| |
| ret = t4_check_fw_version(adap); |
| if (ret == -EINVAL || ret > 0) { |
| if (upgrade_fw(adap) >= 0) /* recache FW version */ |
| ret = t4_check_fw_version(adap); |
| } |
| if (ret < 0) |
| return ret; |
| |
| /* contact FW, request master */ |
| ret = t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, &state); |
| if (ret < 0) { |
| dev_err(adap->pdev_dev, "could not connect to FW, error %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* reset device */ |
| ret = t4_fw_reset(adap, adap->fn, PIORSTMODE | PIORST); |
| if (ret < 0) |
| goto bye; |
| |
| for (v = 0; v < SGE_NTIMERS - 1; v++) |
| adap->sge.timer_val[v] = min(intr_holdoff[v], MAX_SGE_TIMERVAL); |
| adap->sge.timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; |
| adap->sge.counter_val[0] = 1; |
| for (v = 1; v < SGE_NCOUNTERS; v++) |
| adap->sge.counter_val[v] = min(intr_cnt[v - 1], |
| THRESHOLD_3_MASK); |
| #define FW_PARAM_DEV(param) \ |
| (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ |
| FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) |
| |
| params[0] = FW_PARAM_DEV(CCLK); |
| ret = t4_query_params(adap, adap->fn, adap->fn, 0, 1, params, val); |
| if (ret < 0) |
| goto bye; |
| adap->params.vpd.cclk = val[0]; |
| |
| ret = adap_init1(adap, &c); |
| if (ret < 0) |
| goto bye; |
| |
| #define FW_PARAM_PFVF(param) \ |
| (FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ |
| FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) | \ |
| FW_PARAMS_PARAM_Y(adap->fn)) |
| |
| params[0] = FW_PARAM_DEV(PORTVEC); |
| params[1] = FW_PARAM_PFVF(L2T_START); |
| params[2] = FW_PARAM_PFVF(L2T_END); |
| params[3] = FW_PARAM_PFVF(FILTER_START); |
| params[4] = FW_PARAM_PFVF(FILTER_END); |
| params[5] = FW_PARAM_PFVF(IQFLINT_START); |
| params[6] = FW_PARAM_PFVF(EQ_START); |
| ret = t4_query_params(adap, adap->fn, adap->fn, 0, 7, params, val); |
| if (ret < 0) |
| goto bye; |
| port_vec = val[0]; |
| adap->tids.ftid_base = val[3]; |
| adap->tids.nftids = val[4] - val[3] + 1; |
| adap->sge.ingr_start = val[5]; |
| adap->sge.egr_start = val[6]; |
| |
| if (c.ofldcaps) { |
| /* query offload-related parameters */ |
| params[0] = FW_PARAM_DEV(NTID); |
| params[1] = FW_PARAM_PFVF(SERVER_START); |
| params[2] = FW_PARAM_PFVF(SERVER_END); |
| params[3] = FW_PARAM_PFVF(TDDP_START); |
| params[4] = FW_PARAM_PFVF(TDDP_END); |
| params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ); |
| ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, |
| val); |
| if (ret < 0) |
| goto bye; |
| adap->tids.ntids = val[0]; |
| adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS); |
| adap->tids.stid_base = val[1]; |
| adap->tids.nstids = val[2] - val[1] + 1; |
| adap->vres.ddp.start = val[3]; |
| adap->vres.ddp.size = val[4] - val[3] + 1; |
| adap->params.ofldq_wr_cred = val[5]; |
| adap->params.offload = 1; |
| } |
| if (c.rdmacaps) { |
| params[0] = FW_PARAM_PFVF(STAG_START); |
| params[1] = FW_PARAM_PFVF(STAG_END); |
| params[2] = FW_PARAM_PFVF(RQ_START); |
| params[3] = FW_PARAM_PFVF(RQ_END); |
| params[4] = FW_PARAM_PFVF(PBL_START); |
| params[5] = FW_PARAM_PFVF(PBL_END); |
| ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, |
| val); |
| if (ret < 0) |
| goto bye; |
| adap->vres.stag.start = val[0]; |
| adap->vres.stag.size = val[1] - val[0] + 1; |
| adap->vres.rq.start = val[2]; |
| adap->vres.rq.size = val[3] - val[2] + 1; |
| adap->vres.pbl.start = val[4]; |
| adap->vres.pbl.size = val[5] - val[4] + 1; |
| |
| params[0] = FW_PARAM_PFVF(SQRQ_START); |
| params[1] = FW_PARAM_PFVF(SQRQ_END); |
| params[2] = FW_PARAM_PFVF(CQ_START); |
| params[3] = FW_PARAM_PFVF(CQ_END); |
| params[4] = FW_PARAM_PFVF(OCQ_START); |
| params[5] = FW_PARAM_PFVF(OCQ_END); |
| ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, |
| val); |
| if (ret < 0) |
| goto bye; |
| adap->vres.qp.start = val[0]; |
| adap->vres.qp.size = val[1] - val[0] + 1; |
| adap->vres.cq.start = val[2]; |
| adap->vres.cq.size = val[3] - val[2] + 1; |
| adap->vres.ocq.start = val[4]; |
| adap->vres.ocq.size = val[5] - val[4] + 1; |
| } |
| if (c.iscsicaps) { |
| params[0] = FW_PARAM_PFVF(ISCSI_START); |
| params[1] = FW_PARAM_PFVF(ISCSI_END); |
| ret = t4_query_params(adap, adap->fn, adap->fn, 0, 2, params, |
| val); |
| if (ret < 0) |
| goto bye; |
| adap->vres.iscsi.start = val[0]; |
| adap->vres.iscsi.size = val[1] - val[0] + 1; |
| } |
| #undef FW_PARAM_PFVF |
| #undef FW_PARAM_DEV |
| |
| adap->params.nports = hweight32(port_vec); |
| adap->params.portvec = port_vec; |
| adap->flags |= FW_OK; |
| |
| /* These are finalized by FW initialization, load their values now */ |
| v = t4_read_reg(adap, TP_TIMER_RESOLUTION); |
| adap->params.tp.tre = TIMERRESOLUTION_GET(v); |
| t4_read_mtu_tbl(adap, adap->params.mtus, NULL); |
| t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, |
| adap->params.b_wnd); |
| |
| #ifdef CONFIG_PCI_IOV |
| /* |
| * Provision resource limits for Virtual Functions. We currently |
| * grant them all the same static resource limits except for the Port |
| * Access Rights Mask which we're assigning based on the PF. All of |
| * the static provisioning stuff for both the PF and VF really needs |
| * to be managed in a persistent manner for each device which the |
| * firmware controls. |
| */ |
| { |
| int pf, vf; |
| |
| for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { |
| if (num_vf[pf] <= 0) |
| continue; |
| |
| /* VF numbering starts at 1! */ |
| for (vf = 1; vf <= num_vf[pf]; vf++) { |
| ret = t4_cfg_pfvf(adap, adap->fn, pf, vf, |
| VFRES_NEQ, VFRES_NETHCTRL, |
| VFRES_NIQFLINT, VFRES_NIQ, |
| VFRES_TC, VFRES_NVI, |
| FW_PFVF_CMD_CMASK_MASK, |
| pfvfres_pmask(adap, pf, vf), |
| VFRES_NEXACTF, |
| VFRES_R_CAPS, VFRES_WX_CAPS); |
| if (ret < 0) |
| dev_warn(adap->pdev_dev, "failed to " |
| "provision pf/vf=%d/%d; " |
| "err=%d\n", pf, vf, ret); |
| } |
| } |
| } |
| #endif |
| |
| setup_memwin(adap); |
| return 0; |
| |
| /* |
| * If a command timed out or failed with EIO FW does not operate within |
| * its spec or something catastrophic happened to HW/FW, stop issuing |
| * commands. |
| */ |
| bye: if (ret != -ETIMEDOUT && ret != -EIO) |
| t4_fw_bye(adap, adap->fn); |
| return ret; |
| } |
| |
| /* EEH callbacks */ |
| |
| static pci_ers_result_t eeh_err_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| int i; |
| struct adapter *adap = pci_get_drvdata(pdev); |
| |
| if (!adap) |
| goto out; |
| |
| rtnl_lock(); |
| adap->flags &= ~FW_OK; |
| notify_ulds(adap, CXGB4_STATE_START_RECOVERY); |
| for_each_port(adap, i) { |
| struct net_device *dev = adap->port[i]; |
| |
| netif_device_detach(dev); |
| netif_carrier_off(dev); |
| } |
| if (adap->flags & FULL_INIT_DONE) |
| cxgb_down(adap); |
| rtnl_unlock(); |
| pci_disable_device(pdev); |
| out: return state == pci_channel_io_perm_failure ? |
| PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| static pci_ers_result_t eeh_slot_reset(struct pci_dev *pdev) |
| { |
| int i, ret; |
| struct fw_caps_config_cmd c; |
| struct adapter *adap = pci_get_drvdata(pdev); |
| |
| if (!adap) { |
| pci_restore_state(pdev); |
| pci_save_state(pdev); |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| if (pci_enable_device(pdev)) { |
| dev_err(&pdev->dev, "cannot reenable PCI device after reset\n"); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| pci_set_master(pdev); |
| pci_restore_state(pdev); |
| pci_save_state(pdev); |
| pci_cleanup_aer_uncorrect_error_status(pdev); |
| |
| if (t4_wait_dev_ready(adap) < 0) |
| return PCI_ERS_RESULT_DISCONNECT; |
| if (t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, NULL)) |
| return PCI_ERS_RESULT_DISCONNECT; |
| adap->flags |= FW_OK; |
| if (adap_init1(adap, &c)) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| for_each_port(adap, i) { |
| struct port_info *p = adap2pinfo(adap, i); |
| |
| ret = t4_alloc_vi(adap, adap->fn, p->tx_chan, adap->fn, 0, 1, |
| NULL, NULL); |
| if (ret < 0) |
| return PCI_ERS_RESULT_DISCONNECT; |
| p->viid = ret; |
| p->xact_addr_filt = -1; |
| } |
| |
| t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, |
| adap->params.b_wnd); |
| setup_memwin(adap); |
| if (cxgb_up(adap)) |
| return PCI_ERS_RESULT_DISCONNECT; |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static void eeh_resume(struct pci_dev *pdev) |
| { |
| int i; |
| struct adapter *adap = pci_get_drvdata(pdev); |
| |
| if (!adap) |
| return; |
| |
| rtnl_lock(); |
| for_each_port(adap, i) { |
| struct net_device *dev = adap->port[i]; |
| |
| if (netif_running(dev)) { |
| link_start(dev); |
| cxgb_set_rxmode(dev); |
| } |
| netif_device_attach(dev); |
| } |
| rtnl_unlock(); |
| } |
| |
| static struct pci_error_handlers cxgb4_eeh = { |
| .error_detected = eeh_err_detected, |
| .slot_reset = eeh_slot_reset, |
| .resume = eeh_resume, |
| }; |
| |
| static inline bool is_10g_port(const struct link_config *lc) |
| { |
| return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0; |
| } |
| |
| static inline void init_rspq(struct sge_rspq *q, u8 timer_idx, u8 pkt_cnt_idx, |
| unsigned int size, unsigned int iqe_size) |
| { |
| q->intr_params = QINTR_TIMER_IDX(timer_idx) | |
| (pkt_cnt_idx < SGE_NCOUNTERS ? QINTR_CNT_EN : 0); |
| q->pktcnt_idx = pkt_cnt_idx < SGE_NCOUNTERS ? pkt_cnt_idx : 0; |
| q->iqe_len = iqe_size; |
| q->size = size; |
| } |
| |
| /* |
| * Perform default configuration of DMA queues depending on the number and type |
| * of ports we found and the number of available CPUs. Most settings can be |
| * modified by the admin prior to actual use. |
| */ |
| static void __devinit cfg_queues(struct adapter *adap) |
| { |
| struct sge *s = &adap->sge; |
| int i, q10g = 0, n10g = 0, qidx = 0; |
| |
| for_each_port(adap, i) |
| n10g += is_10g_port(&adap2pinfo(adap, i)->link_cfg); |
| |
| /* |
| * We default to 1 queue per non-10G port and up to # of cores queues |
| * per 10G port. |
| */ |
| if (n10g) |
| q10g = (MAX_ETH_QSETS - (adap->params.nports - n10g)) / n10g; |
| if (q10g > num_online_cpus()) |
| q10g = num_online_cpus(); |
| |
| for_each_port(adap, i) { |
| struct port_info *pi = adap2pinfo(adap, i); |
| |
| pi->first_qset = qidx; |
| pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1; |
| qidx += pi->nqsets; |
| } |
| |
| s->ethqsets = qidx; |
| s->max_ethqsets = qidx; /* MSI-X may lower it later */ |
| |
| if (is_offload(adap)) { |
| /* |
| * For offload we use 1 queue/channel if all ports are up to 1G, |
| * otherwise we divide all available queues amongst the channels |
| * capped by the number of available cores. |
| */ |
| if (n10g) { |
| i = min_t(int, ARRAY_SIZE(s->ofldrxq), |
| num_online_cpus()); |
| s->ofldqsets = roundup(i, adap->params.nports); |
| } else |
| s->ofldqsets = adap->params.nports; |
| /* For RDMA one Rx queue per channel suffices */ |
| s->rdmaqs = adap->params.nports; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(s->ethrxq); i++) { |
| struct sge_eth_rxq *r = &s->ethrxq[i]; |
| |
| init_rspq(&r->rspq, 0, 0, 1024, 64); |
| r->fl.size = 72; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(s->ethtxq); i++) |
| s->ethtxq[i].q.size = 1024; |
| |
| for (i = 0; i < ARRAY_SIZE(s->ctrlq); i++) |
| s->ctrlq[i].q.size = 512; |
| |
| for (i = 0; i < ARRAY_SIZE(s->ofldtxq); i++) |
| s->ofldtxq[i].q.size = 1024; |
| |
| for (i = 0; i < ARRAY_SIZE(s->ofldrxq); i++) { |
| struct sge_ofld_rxq *r = &s->ofldrxq[i]; |
| |
| init_rspq(&r->rspq, 0, 0, 1024, 64); |
| r->rspq.uld = CXGB4_ULD_ISCSI; |
| r->fl.size = 72; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(s->rdmarxq); i++) { |
| struct sge_ofld_rxq *r = &s->rdmarxq[i]; |
| |
| init_rspq(&r->rspq, 0, 0, 511, 64); |
| r->rspq.uld = CXGB4_ULD_RDMA; |
| r->fl.size = 72; |
| } |
| |
| init_rspq(&s->fw_evtq, 6, 0, 512, 64); |
| init_rspq(&s->intrq, 6, 0, 2 * MAX_INGQ, 64); |
| } |
| |
| /* |
| * Reduce the number of Ethernet queues across all ports to at most n. |
| * n provides at least one queue per port. |
| */ |
| static void __devinit reduce_ethqs(struct adapter *adap, int n) |
| { |
| int i; |
| struct port_info *pi; |
| |
| while (n < adap->sge.ethqsets) |
| for_each_port(adap, i) { |
| pi = adap2pinfo(adap, i); |
| if (pi->nqsets > 1) { |
| pi->nqsets--; |
| adap->sge.ethqsets--; |
| if (adap->sge.ethqsets <= n) |
| break; |
| } |
| } |
| |
| n = 0; |
| for_each_port(adap, i) { |
| pi = adap2pinfo(adap, i); |
| pi->first_qset = n; |
| n += pi->nqsets; |
| } |
| } |
| |
| /* 2 MSI-X vectors needed for the FW queue and non-data interrupts */ |
| #define EXTRA_VECS 2 |
| |
| static int __devinit enable_msix(struct adapter *adap) |
| { |
| int ofld_need = 0; |
| int i, err, want, need; |
| struct sge *s = &adap->sge; |
| unsigned int nchan = adap->params.nports; |
| struct msix_entry entries[MAX_INGQ + 1]; |
| |
| for (i = 0; i < ARRAY_SIZE(entries); ++i) |
| entries[i].entry = i; |
| |
| want = s->max_ethqsets + EXTRA_VECS; |
| if (is_offload(adap)) { |
| want += s->rdmaqs + s->ofldqsets; |
| /* need nchan for each possible ULD */ |
| ofld_need = 2 * nchan; |
| } |
| need = adap->params.nports + EXTRA_VECS + ofld_need; |
| |
| while ((err = pci_enable_msix(adap->pdev, entries, want)) >= need) |
| want = err; |
| |
| if (!err) { |
| /* |
| * Distribute available vectors to the various queue groups. |
| * Every group gets its minimum requirement and NIC gets top |
| * priority for leftovers. |
| */ |
| i = want - EXTRA_VECS - ofld_need; |
| if (i < s->max_ethqsets) { |
| s->max_ethqsets = i; |
| if (i < s->ethqsets) |
| reduce_ethqs(adap, i); |
| } |
| if (is_offload(adap)) { |
| i = want - EXTRA_VECS - s->max_ethqsets; |
| i -= ofld_need - nchan; |
| s->ofldqsets = (i / nchan) * nchan; /* round down */ |
| } |
| for (i = 0; i < want; ++i) |
| adap->msix_info[i].vec = entries[i].vector; |
| } else if (err > 0) |
| dev_info(adap->pdev_dev, |
| "only %d MSI-X vectors left, not using MSI-X\n", err); |
| return err; |
| } |
| |
| #undef EXTRA_VECS |
| |
| static int __devinit init_rss(struct adapter *adap) |
| { |
| unsigned int i, j; |
| |
| for_each_port(adap, i) { |
| struct port_info *pi = adap2pinfo(adap, i); |
| |
| pi->rss = kcalloc(pi->rss_size, sizeof(u16), GFP_KERNEL); |
| if (!pi->rss) |
| return -ENOMEM; |
| for (j = 0; j < pi->rss_size; j++) |
| pi->rss[j] = ethtool_rxfh_indir_default(j, pi->nqsets); |
| } |
| return 0; |
| } |
| |
| static void __devinit print_port_info(const struct net_device *dev) |
| { |
| static const char *base[] = { |
| "R XFI", "R XAUI", "T SGMII", "T XFI", "T XAUI", "KX4", "CX4", |
| "KX", "KR", "R SFP+", "KR/KX", "KR/KX/KX4" |
| }; |
| |
| char buf[80]; |
| char *bufp = buf; |
| const char *spd = ""; |
| const struct port_info *pi = netdev_priv(dev); |
| const struct adapter *adap = pi->adapter; |
| |
| if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_2_5GB) |
| spd = " 2.5 GT/s"; |
| else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_5_0GB) |
| spd = " 5 GT/s"; |
| |
| if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M) |
| bufp += sprintf(bufp, "100/"); |
| if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G) |
| bufp += sprintf(bufp, "1000/"); |
| if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G) |
| bufp += sprintf(bufp, "10G/"); |
| if (bufp != buf) |
| --bufp; |
| sprintf(bufp, "BASE-%s", base[pi->port_type]); |
| |
| netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s%s\n", |
| adap->params.vpd.id, adap->params.rev, buf, |
| is_offload(adap) ? "R" : "", adap->params.pci.width, spd, |
| (adap->flags & USING_MSIX) ? " MSI-X" : |
| (adap->flags & USING_MSI) ? " MSI" : ""); |
| netdev_info(dev, "S/N: %s, E/C: %s\n", |
| adap->params.vpd.sn, adap->params.vpd.ec); |
| } |
| |
| static void __devinit enable_pcie_relaxed_ordering(struct pci_dev *dev) |
| { |
| u16 v; |
| int pos; |
| |
| pos = pci_pcie_cap(dev); |
| if (pos > 0) { |
| pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &v); |
| v |= PCI_EXP_DEVCTL_RELAX_EN; |
| pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, v); |
| } |
| } |
| |
| /* |
| * Free the following resources: |
| * - memory used for tables |
| * - MSI/MSI-X |
| * - net devices |
| * - resources FW is holding for us |
| */ |
| static void free_some_resources(struct adapter *adapter) |
| { |
| unsigned int i; |
| |
| t4_free_mem(adapter->l2t); |
| t4_free_mem(adapter->tids.tid_tab); |
| disable_msi(adapter); |
| |
| for_each_port(adapter, i) |
| if (adapter->port[i]) { |
| kfree(adap2pinfo(adapter, i)->rss); |
| free_netdev(adapter->port[i]); |
| } |
| if (adapter->flags & FW_OK) |
| t4_fw_bye(adapter, adapter->fn); |
| } |
| |
| #define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN) |
| #define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | TSO_FLAGS | \ |
| NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA) |
| |
| static int __devinit init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| int func, i, err; |
| struct port_info *pi; |
| bool highdma = false; |
| struct adapter *adapter = NULL; |
| |
| printk_once(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); |
| |
| err = pci_request_regions(pdev, KBUILD_MODNAME); |
| if (err) { |
| /* Just info, some other driver may have claimed the device. */ |
| dev_info(&pdev->dev, "cannot obtain PCI resources\n"); |
| return err; |
| } |
| |
| /* We control everything through one PF */ |
| func = PCI_FUNC(pdev->devfn); |
| if (func != ent->driver_data) { |
| pci_save_state(pdev); /* to restore SR-IOV later */ |
| goto sriov; |
| } |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "cannot enable PCI device\n"); |
| goto out_release_regions; |
| } |
| |
| if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { |
| highdma = true; |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); |
| if (err) { |
| dev_err(&pdev->dev, "unable to obtain 64-bit DMA for " |
| "coherent allocations\n"); |
| goto out_disable_device; |
| } |
| } else { |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, "no usable DMA configuration\n"); |
| goto out_disable_device; |
| } |
| } |
| |
| pci_enable_pcie_error_reporting(pdev); |
| enable_pcie_relaxed_ordering(pdev); |
| pci_set_master(pdev); |
| pci_save_state(pdev); |
| |
| adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); |
| if (!adapter) { |
| err = -ENOMEM; |
| goto out_disable_device; |
| } |
| |
| adapter->regs = pci_ioremap_bar(pdev, 0); |
| if (!adapter->regs) { |
| dev_err(&pdev->dev, "cannot map device registers\n"); |
| err = -ENOMEM; |
| goto out_free_adapter; |
| } |
| |
| adapter->pdev = pdev; |
| adapter->pdev_dev = &pdev->dev; |
| adapter->fn = func; |
| adapter->msg_enable = dflt_msg_enable; |
| memset(adapter->chan_map, 0xff, sizeof(adapter->chan_map)); |
| |
| spin_lock_init(&adapter->stats_lock); |
| spin_lock_init(&adapter->tid_release_lock); |
| |
| INIT_WORK(&adapter->tid_release_task, process_tid_release_list); |
| |
| err = t4_prep_adapter(adapter); |
| if (err) |
| goto out_unmap_bar; |
| err = adap_init0(adapter); |
| if (err) |
| goto out_unmap_bar; |
| |
| for_each_port(adapter, i) { |
| struct net_device *netdev; |
| |
| netdev = alloc_etherdev_mq(sizeof(struct port_info), |
| MAX_ETH_QSETS); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto out_free_dev; |
| } |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| adapter->port[i] = netdev; |
| pi = netdev_priv(netdev); |
| pi->adapter = adapter; |
| pi->xact_addr_filt = -1; |
| pi->port_id = i; |
| netdev->irq = pdev->irq; |
| |
| netdev->hw_features = NETIF_F_SG | TSO_FLAGS | |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | |
| NETIF_F_RXCSUM | NETIF_F_RXHASH | |
| NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; |
| if (highdma) |
| netdev->hw_features |= NETIF_F_HIGHDMA; |
| netdev->features |= netdev->hw_features; |
| netdev->vlan_features = netdev->features & VLAN_FEAT; |
| |
| netdev->priv_flags |= IFF_UNICAST_FLT; |
| |
| netdev->netdev_ops = &cxgb4_netdev_ops; |
| SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops); |
| } |
| |
| pci_set_drvdata(pdev, adapter); |
| |
| if (adapter->flags & FW_OK) { |
| err = t4_port_init(adapter, func, func, 0); |
| if (err) |
| goto out_free_dev; |
| } |
| |
| /* |
| * Configure queues and allocate tables now, they can be needed as |
| * soon as the first register_netdev completes. |
| */ |
| cfg_queues(adapter); |
| |
| adapter->l2t = t4_init_l2t(); |
| if (!adapter->l2t) { |
| /* We tolerate a lack of L2T, giving up some functionality */ |
| dev_warn(&pdev->dev, "could not allocate L2T, continuing\n"); |
| adapter->params.offload = 0; |
| } |
| |
| if (is_offload(adapter) && tid_init(&adapter->tids) < 0) { |
| dev_warn(&pdev->dev, "could not allocate TID table, " |
| "continuing\n"); |
| adapter->params.offload = 0; |
| } |
| |
| /* See what interrupts we'll be using */ |
| if (msi > 1 && enable_msix(adapter) == 0) |
| adapter->flags |= USING_MSIX; |
| else if (msi > 0 && pci_enable_msi(pdev) == 0) |
| adapter->flags |= USING_MSI; |
| |
| err = init_rss(adapter); |
| if (err) |
| goto out_free_dev; |
| |
| /* |
| * The card is now ready to go. If any errors occur during device |
| * registration we do not fail the whole card but rather proceed only |
| * with the ports we manage to register successfully. However we must |
| * register at least one net device. |
| */ |
| for_each_port(adapter, i) { |
| pi = adap2pinfo(adapter, i); |
| netif_set_real_num_tx_queues(adapter->port[i], pi->nqsets); |
| netif_set_real_num_rx_queues(adapter->port[i], pi->nqsets); |
| |
| err = register_netdev(adapter->port[i]); |
| if (err) |
| break; |
| adapter->chan_map[pi->tx_chan] = i; |
| print_port_info(adapter->port[i]); |
| } |
| if (i == 0) { |
| dev_err(&pdev->dev, "could not register any net devices\n"); |
| goto out_free_dev; |
| } |
| if (err) { |
| dev_warn(&pdev->dev, "only %d net devices registered\n", i); |
| err = 0; |
| } |
| |
| if (cxgb4_debugfs_root) { |
| adapter->debugfs_root = debugfs_create_dir(pci_name(pdev), |
| cxgb4_debugfs_root); |
| setup_debugfs(adapter); |
| } |
| |
| /* PCIe EEH recovery on powerpc platforms needs fundamental reset */ |
| pdev->needs_freset = 1; |
| |
| if (is_offload(adapter)) |
| attach_ulds(adapter); |
| |
| sriov: |
| #ifdef CONFIG_PCI_IOV |
| if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0) |
| if (pci_enable_sriov(pdev, num_vf[func]) == 0) |
| dev_info(&pdev->dev, |
| "instantiated %u virtual functions\n", |
| num_vf[func]); |
| #endif |
| return 0; |
| |
| out_free_dev: |
| free_some_resources(adapter); |
| out_unmap_bar: |
| iounmap(adapter->regs); |
| out_free_adapter: |
| kfree(adapter); |
| out_disable_device: |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| out_release_regions: |
| pci_release_regions(pdev); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| static void __devexit remove_one(struct pci_dev *pdev) |
| { |
| struct adapter *adapter = pci_get_drvdata(pdev); |
| |
| pci_disable_sriov(pdev); |
| |
| if (adapter) { |
| int i; |
| |
| if (is_offload(adapter)) |
| detach_ulds(adapter); |
| |
| for_each_port(adapter, i) |
| if (adapter->port[i]->reg_state == NETREG_REGISTERED) |
| unregister_netdev(adapter->port[i]); |
| |
| if (adapter->debugfs_root) |
| debugfs_remove_recursive(adapter->debugfs_root); |
| |
| if (adapter->flags & FULL_INIT_DONE) |
| cxgb_down(adapter); |
| |
| free_some_resources(adapter); |
| iounmap(adapter->regs); |
| kfree(adapter); |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| pci_release_regions(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } else |
| pci_release_regions(pdev); |
| } |
| |
| static struct pci_driver cxgb4_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = cxgb4_pci_tbl, |
| .probe = init_one, |
| .remove = __devexit_p(remove_one), |
| .err_handler = &cxgb4_eeh, |
| }; |
| |
| static int __init cxgb4_init_module(void) |
| { |
| int ret; |
| |
| /* Debugfs support is optional, just warn if this fails */ |
| cxgb4_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); |
| if (!cxgb4_debugfs_root) |
| pr_warning("could not create debugfs entry, continuing\n"); |
| |
| ret = pci_register_driver(&cxgb4_driver); |
| if (ret < 0) |
| debugfs_remove(cxgb4_debugfs_root); |
| return ret; |
| } |
| |
| static void __exit cxgb4_cleanup_module(void) |
| { |
| pci_unregister_driver(&cxgb4_driver); |
| debugfs_remove(cxgb4_debugfs_root); /* NULL ok */ |
| } |
| |
| module_init(cxgb4_init_module); |
| module_exit(cxgb4_cleanup_module); |