arch/xtensa/Kconfig - kernel/msm-4.19 - Gitiles

 config ZONE_DMA
 	def_bool y

 config XTENSA
 	def_bool y
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select HAVE_FUNCTION_TRACER
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
 	select VIRT_TO_BUS
 	help
 	  Xtensa processors are 32-bit RISC machines designed by Tensilica
 	  primarily for embedded systems.  These processors are both
 	  configurable and extensible.  The Linux port to the Xtensa
 	  architecture supports all processor configurations and extensions,
 	  with reasonable minimum requirements.  The Xtensa Linux project has
 	  a home page at <http://www.linux-xtensa.org/>.

 config RWSEM_XCHGADD_ALGORITHM
 	def_bool y

 config GENERIC_HWEIGHT
 	def_bool y

 config ARCH_HAS_ILOG2_U32
 	def_bool n

 config ARCH_HAS_ILOG2_U64
 	def_bool n

 config NO_IOPORT_MAP
 	def_bool n

 config HZ
 	int
 	default 100

 source "init/Kconfig"
 source "kernel/Kconfig.freezer"

 config LOCKDEP_SUPPORT
 	def_bool y

 config STACKTRACE_SUPPORT
 	def_bool y

 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y

 config MMU
 	bool
 	default n if !XTENSA_VARIANT_CUSTOM
 	default XTENSA_VARIANT_MMU if XTENSA_VARIANT_CUSTOM

 config VARIANT_IRQ_SWITCH
 	def_bool n

 config HAVE_XTENSA_GPIO32
 	def_bool n

 config MAY_HAVE_SMP
 	def_bool n

 menu "Processor type and features"

 choice
 	prompt "Xtensa Processor Configuration"
 	default XTENSA_VARIANT_FSF

 config XTENSA_VARIANT_FSF
 	bool "fsf - default (not generic) configuration"
 	select MMU

 config XTENSA_VARIANT_DC232B
 	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
 	select MMU
 	select HAVE_XTENSA_GPIO32
 	help
 	  This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).

 config XTENSA_VARIANT_DC233C
 	bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
 	select MMU
 	select HAVE_XTENSA_GPIO32
 	help
 	  This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).

 config XTENSA_VARIANT_S6000
 	bool "s6000 - Stretch software configurable processor"
 	select VARIANT_IRQ_SWITCH
 	select ARCH_REQUIRE_GPIOLIB
 	select XTENSA_CALIBRATE_CCOUNT

 config XTENSA_VARIANT_CUSTOM
 	bool "Custom Xtensa processor configuration"
 	select MAY_HAVE_SMP
 	select HAVE_XTENSA_GPIO32
 	help
 	  Select this variant to use a custom Xtensa processor configuration.
 	  You will be prompted for a processor variant CORENAME.
 endchoice

 config XTENSA_VARIANT_CUSTOM_NAME
 	string "Xtensa Processor Custom Core Variant Name"
 	depends on XTENSA_VARIANT_CUSTOM
 	help
 	  Provide the name of a custom Xtensa processor variant.
 	  This CORENAME selects arch/xtensa/variant/CORENAME.
 	  Dont forget you have to select MMU if you have one.

 config XTENSA_VARIANT_NAME
 	string
 	default "dc232b"			if XTENSA_VARIANT_DC232B
 	default "dc233c"			if XTENSA_VARIANT_DC233C
 	default "fsf"				if XTENSA_VARIANT_FSF
 	default "s6000"				if XTENSA_VARIANT_S6000
 	default XTENSA_VARIANT_CUSTOM_NAME	if XTENSA_VARIANT_CUSTOM

 config XTENSA_VARIANT_MMU
 	bool "Core variant has a Full MMU (TLB, Pages, Protection, etc)"
 	depends on XTENSA_VARIANT_CUSTOM
 	default y
 	help
 	  Build a Conventional Kernel with full MMU support,
 	  ie: it supports a TLB with auto-loading, page protection.

 config XTENSA_UNALIGNED_USER
 	bool "Unaligned memory access in use space"
 	help
 	  The Xtensa architecture currently does not handle unaligned
 	  memory accesses in hardware but through an exception handler.
 	  Per default, unaligned memory accesses are disabled in user space.

 	  Say Y here to enable unaligned memory access in user space.

 source "kernel/Kconfig.preempt"

 config HAVE_SMP
 	bool "System Supports SMP (MX)"
 	depends on MAY_HAVE_SMP
 	select XTENSA_MX
 	help
 	  This option is use to indicate that the system-on-a-chip (SOC)
 	  supports Multiprocessing. Multiprocessor support implemented above
 	  the CPU core definition and currently needs to be selected manually.

 	  Multiprocessor support in implemented with external cache and
 	  interrupt controlers.

 	  The MX interrupt distributer adds Interprocessor Interrupts
 	  and causes the IRQ numbers to be increased by 4 for devices
 	  like the open cores ethernet driver and the serial interface.

 	  You still have to select "Enable SMP" to enable SMP on this SOC.

 config SMP
 	bool "Enable Symmetric multi-processing support"
 	depends on HAVE_SMP
 	select GENERIC_SMP_IDLE_THREAD
 	help
 	  Enabled SMP Software; allows more than one CPU/CORE
 	  to be activated during startup.

 config NR_CPUS
 	depends on SMP
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
 	default "4"

 config HOTPLUG_CPU
 	bool "Enable CPU hotplug support"
 	depends on SMP
 	help
 	  Say Y here to allow turning CPUs off and on. CPUs can be
 	  controlled through /sys/devices/system/cpu.

 	  Say N if you want to disable CPU hotplug.

 config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 	bool "Initialize Xtensa MMU inside the Linux kernel code"
 	depends on MMU
 	default y
 	help
 	  Earlier version initialized the MMU in the exception vector
 	  before jumping to _startup in head.S and had an advantage that
 	  it was possible to place a software breakpoint at 'reset' and
 	  then enter your normal kernel breakpoints once the MMU was mapped
 	  to the kernel mappings (0XC0000000).

 	  This unfortunately doesn't work for U-Boot and likley also wont
 	  work for using KEXEC to have a hot kernel ready for doing a
 	  KDUMP.

 	  So now the MMU is initialized in head.S but it's necessary to
 	  use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup.
 	  xt-gdb can't place a Software Breakpoint in the  0XD region prior
 	  to mapping the MMU and after mapping even if the area of low memory
 	  was mapped gdb wouldn't remove the breakpoint on hitting it as the
 	  PC wouldn't match. Since Hardware Breakpoints are recommended for
 	  Linux configurations it seems reasonable to just assume they exist
 	  and leave this older mechanism for unfortunate souls that choose
 	  not to follow Tensilica's recommendation.

 	  Selecting this will cause U-Boot to set the KERNEL Load and Entry
 	  address at 0x00003000 instead of the mapped std of 0xD0003000.

 	  If in doubt, say Y.

 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
 	help
 	  Linux can use the full amount of RAM in the system by
 	  default. However, the default MMUv2 setup only maps the
 	  lowermost 128 MB of memory linearly to the areas starting
 	  at 0xd0000000 (cached) and 0xd8000000 (uncached).
 	  When there are more than 128 MB memory in the system not
 	  all of it can be "permanently mapped" by the kernel.
 	  The physical memory that's not permanently mapped is called
 	  "high memory".

 	  If you are compiling a kernel which will never run on a
 	  machine with more than 128 MB total physical RAM, answer
 	  N here.

 	  If unsure, say Y.

 config FAST_SYSCALL_XTENSA
 	bool "Enable fast atomic syscalls"
 	default n
 	help
 	  fast_syscall_xtensa is a syscall that can make atomic operations
 	  on UP kernel when processor has no s32c1i support.

 	  This syscall is deprecated. It may have issues when called with
 	  invalid arguments. It is provided only for backwards compatibility.
 	  Only enable it if your userspace software requires it.

 	  If unsure, say N.

 config FAST_SYSCALL_SPILL_REGISTERS
 	bool "Enable spill registers syscall"
 	default n
 	help
 	  fast_syscall_spill_registers is a syscall that spills all active
 	  register windows of a calling userspace task onto its stack.

 	  This syscall is deprecated. It may have issues when called with
 	  invalid arguments. It is provided only for backwards compatibility.
 	  Only enable it if your userspace software requires it.

 	  If unsure, say N.

 endmenu

 config XTENSA_CALIBRATE_CCOUNT
 	def_bool n
 	help
 	  On some platforms (XT2000, for example), the CPU clock rate can
 	  vary.  The frequency can be determined, however, by measuring
 	  against a well known, fixed frequency, such as an UART oscillator.

 config SERIAL_CONSOLE
 	def_bool n

 menu "Bus options"

 config PCI
 	bool "PCI support"
 	default y
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 	  VESA. If you have PCI, say Y, otherwise N.

 source "drivers/pci/Kconfig"

 endmenu

 menu "Platform options"

 choice
 	prompt "Xtensa System Type"
 	default XTENSA_PLATFORM_ISS

 config XTENSA_PLATFORM_ISS
 	bool "ISS"
 	select XTENSA_CALIBRATE_CCOUNT
 	select SERIAL_CONSOLE
 	help
 	  ISS is an acronym for Tensilica's Instruction Set Simulator.

 config XTENSA_PLATFORM_XT2000
 	bool "XT2000"
 	select HAVE_IDE
 	help
 	  XT2000 is the name of Tensilica's feature-rich emulation platform.
 	  This hardware is capable of running a full Linux distribution.

 config XTENSA_PLATFORM_S6105
 	bool "S6105"
 	select HAVE_IDE
 	select SERIAL_CONSOLE
 	select NO_IOPORT_MAP

 config XTENSA_PLATFORM_XTFPGA
 	bool "XTFPGA"
 	select ETHOC if ETHERNET
 	select SERIAL_CONSOLE
 	select XTENSA_CALIBRATE_CCOUNT
 	help
 	  XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
 	  This hardware is capable of running a full Linux distribution.

 endchoice


 config XTENSA_CPU_CLOCK
 	int "CPU clock rate [MHz]"
 	depends on !XTENSA_CALIBRATE_CCOUNT
 	default 16

 config GENERIC_CALIBRATE_DELAY
 	bool "Auto calibration of the BogoMIPS value"
 	help
 	  The BogoMIPS value can easily be derived from the CPU frequency.

 config CMDLINE_BOOL
 	bool "Default bootloader kernel arguments"

 config CMDLINE
 	string "Initial kernel command string"
 	depends on CMDLINE_BOOL
 	default "console=ttyS0,38400 root=/dev/ram"
 	help
 	  On some architectures (EBSA110 and CATS), there is currently no way
 	  for the boot loader to pass arguments to the kernel. For these
 	  architectures, you should supply some command-line options at build
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).

 config USE_OF
 	bool "Flattened Device Tree support"
 	select OF
 	select OF_EARLY_FLATTREE
 	help
 	  Include support for flattened device tree machine descriptions.

 config BUILTIN_DTB
 	string "DTB to build into the kernel image"
 	depends on OF

 config BLK_DEV_SIMDISK
 	tristate "Host file-based simulated block device support"
 	default n
 	depends on XTENSA_PLATFORM_ISS && BLOCK
 	help
 	  Create block devices that map to files in the host file system.
 	  Device binding to host file may be changed at runtime via proc
 	  interface provided the device is not in use.

 config BLK_DEV_SIMDISK_COUNT
 	int "Number of host file-based simulated block devices"
 	range 1 10
 	depends on BLK_DEV_SIMDISK
 	default 2
 	help
 	  This is the default minimal number of created block devices.
 	  Kernel/module parameter 'simdisk_count' may be used to change this
 	  value at runtime. More file names (but no more than 10) may be
 	  specified as parameters, simdisk_count grows accordingly.

 config SIMDISK0_FILENAME
 	string "Host filename for the first simulated device"
 	depends on BLK_DEV_SIMDISK = y
 	default ""
 	help
 	  Attach a first simdisk to a host file. Conventionally, this file
 	  contains a root file system.

 config SIMDISK1_FILENAME
 	string "Host filename for the second simulated device"
 	depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1
 	default ""
 	help
 	  Another simulated disk in a host file for a buildroot-independent
 	  storage.

 source "mm/Kconfig"

 source "drivers/pcmcia/Kconfig"

 source "drivers/pci/hotplug/Kconfig"

 endmenu

 menu "Executable file formats"

 source "fs/Kconfig.binfmt"

 endmenu

 source "net/Kconfig"

 source "drivers/Kconfig"

 source "fs/Kconfig"

 source "arch/xtensa/Kconfig.debug"

 source "security/Kconfig"

 source "crypto/Kconfig"

 source "lib/Kconfig"
	config ZONE_DMA
	def_bool y

	config XTENSA
	def_bool y
	select ARCH_WANT_FRAME_POINTERS
	select ARCH_WANT_IPC_PARSE_VERSION
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select BUILDTIME_EXTABLE_SORT
	select CLONE_BACKWARDS
	select COMMON_CLK
	select GENERIC_ATOMIC64
	select GENERIC_CLOCKEVENTS
	select GENERIC_IRQ_SHOW
	select GENERIC_PCI_IOMAP
	select GENERIC_SCHED_CLOCK
	select HAVE_FUNCTION_TRACER
	select HAVE_IRQ_TIME_ACCOUNTING
	select HAVE_OPROFILE
	select HAVE_PERF_EVENTS
	select IRQ_DOMAIN
	select MODULES_USE_ELF_RELA
	select VIRT_TO_BUS
	help
	Xtensa processors are 32-bit RISC machines designed by Tensilica
	primarily for embedded systems. These processors are both
	configurable and extensible. The Linux port to the Xtensa
	architecture supports all processor configurations and extensions,
	with reasonable minimum requirements. The Xtensa Linux project has
	a home page at <http://www.linux-xtensa.org/>.

	config RWSEM_XCHGADD_ALGORITHM
	def_bool y

	config GENERIC_HWEIGHT
	def_bool y

	config ARCH_HAS_ILOG2_U32
	def_bool n

	config ARCH_HAS_ILOG2_U64
	def_bool n

	config NO_IOPORT_MAP
	def_bool n

	config HZ
	int
	default 100

	source "init/Kconfig"
	source "kernel/Kconfig.freezer"

	config LOCKDEP_SUPPORT
	def_bool y

	config STACKTRACE_SUPPORT
	def_bool y

	config TRACE_IRQFLAGS_SUPPORT
	def_bool y

	config MMU
	bool
	default n if !XTENSA_VARIANT_CUSTOM
	default XTENSA_VARIANT_MMU if XTENSA_VARIANT_CUSTOM

	config VARIANT_IRQ_SWITCH
	def_bool n

	config HAVE_XTENSA_GPIO32
	def_bool n

	config MAY_HAVE_SMP
	def_bool n

	menu "Processor type and features"

	choice
	prompt "Xtensa Processor Configuration"
	default XTENSA_VARIANT_FSF

	config XTENSA_VARIANT_FSF
	bool "fsf - default (not generic) configuration"
	select MMU

	config XTENSA_VARIANT_DC232B
	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
	select MMU
	select HAVE_XTENSA_GPIO32
	help
	This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).

	config XTENSA_VARIANT_DC233C
	bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
	select MMU
	select HAVE_XTENSA_GPIO32
	help
	This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).

	config XTENSA_VARIANT_S6000
	bool "s6000 - Stretch software configurable processor"
	select VARIANT_IRQ_SWITCH
	select ARCH_REQUIRE_GPIOLIB
	select XTENSA_CALIBRATE_CCOUNT

	config XTENSA_VARIANT_CUSTOM
	bool "Custom Xtensa processor configuration"
	select MAY_HAVE_SMP
	select HAVE_XTENSA_GPIO32
	help
	Select this variant to use a custom Xtensa processor configuration.
	You will be prompted for a processor variant CORENAME.
	endchoice

	config XTENSA_VARIANT_CUSTOM_NAME
	string "Xtensa Processor Custom Core Variant Name"
	depends on XTENSA_VARIANT_CUSTOM
	help
	Provide the name of a custom Xtensa processor variant.
	This CORENAME selects arch/xtensa/variant/CORENAME.
	Dont forget you have to select MMU if you have one.

	config XTENSA_VARIANT_NAME
	string
	default "dc232b" if XTENSA_VARIANT_DC232B
	default "dc233c" if XTENSA_VARIANT_DC233C
	default "fsf" if XTENSA_VARIANT_FSF
	default "s6000" if XTENSA_VARIANT_S6000
	default XTENSA_VARIANT_CUSTOM_NAME if XTENSA_VARIANT_CUSTOM

	config XTENSA_VARIANT_MMU
	bool "Core variant has a Full MMU (TLB, Pages, Protection, etc)"
	depends on XTENSA_VARIANT_CUSTOM
	default y
	help
	Build a Conventional Kernel with full MMU support,
	ie: it supports a TLB with auto-loading, page protection.

	config XTENSA_UNALIGNED_USER
	bool "Unaligned memory access in use space"
	help
	The Xtensa architecture currently does not handle unaligned
	memory accesses in hardware but through an exception handler.
	Per default, unaligned memory accesses are disabled in user space.

	Say Y here to enable unaligned memory access in user space.

	source "kernel/Kconfig.preempt"

	config HAVE_SMP
	bool "System Supports SMP (MX)"
	depends on MAY_HAVE_SMP
	select XTENSA_MX
	help
	This option is use to indicate that the system-on-a-chip (SOC)
	supports Multiprocessing. Multiprocessor support implemented above
	the CPU core definition and currently needs to be selected manually.

	Multiprocessor support in implemented with external cache and
	interrupt controlers.

	The MX interrupt distributer adds Interprocessor Interrupts
	and causes the IRQ numbers to be increased by 4 for devices
	like the open cores ethernet driver and the serial interface.

	You still have to select "Enable SMP" to enable SMP on this SOC.

	config SMP
	bool "Enable Symmetric multi-processing support"
	depends on HAVE_SMP
	select GENERIC_SMP_IDLE_THREAD
	help
	Enabled SMP Software; allows more than one CPU/CORE
	to be activated during startup.

	config NR_CPUS
	depends on SMP
	int "Maximum number of CPUs (2-32)"
	range 2 32
	default "4"

	config HOTPLUG_CPU
	bool "Enable CPU hotplug support"
	depends on SMP
	help
	Say Y here to allow turning CPUs off and on. CPUs can be
	controlled through /sys/devices/system/cpu.

	Say N if you want to disable CPU hotplug.

	config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
	bool "Initialize Xtensa MMU inside the Linux kernel code"
	depends on MMU
	default y
	help
	Earlier version initialized the MMU in the exception vector
	before jumping to _startup in head.S and had an advantage that
	it was possible to place a software breakpoint at 'reset' and
	then enter your normal kernel breakpoints once the MMU was mapped
	to the kernel mappings (0XC0000000).

	This unfortunately doesn't work for U-Boot and likley also wont
	work for using KEXEC to have a hot kernel ready for doing a
	KDUMP.

	So now the MMU is initialized in head.S but it's necessary to
	use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup.
	xt-gdb can't place a Software Breakpoint in the 0XD region prior
	to mapping the MMU and after mapping even if the area of low memory
	was mapped gdb wouldn't remove the breakpoint on hitting it as the
	PC wouldn't match. Since Hardware Breakpoints are recommended for
	Linux configurations it seems reasonable to just assume they exist
	and leave this older mechanism for unfortunate souls that choose
	not to follow Tensilica's recommendation.

	Selecting this will cause U-Boot to set the KERNEL Load and Entry
	address at 0x00003000 instead of the mapped std of 0xD0003000.

	If in doubt, say Y.

	config HIGHMEM
	bool "High Memory Support"
	depends on MMU
	help
	Linux can use the full amount of RAM in the system by
	default. However, the default MMUv2 setup only maps the
	lowermost 128 MB of memory linearly to the areas starting
	at 0xd0000000 (cached) and 0xd8000000 (uncached).
	When there are more than 128 MB memory in the system not
	all of it can be "permanently mapped" by the kernel.
	The physical memory that's not permanently mapped is called
	"high memory".

	If you are compiling a kernel which will never run on a
	machine with more than 128 MB total physical RAM, answer
	N here.

	If unsure, say Y.

	config FAST_SYSCALL_XTENSA
	bool "Enable fast atomic syscalls"
	default n
	help
	fast_syscall_xtensa is a syscall that can make atomic operations
	on UP kernel when processor has no s32c1i support.

	This syscall is deprecated. It may have issues when called with
	invalid arguments. It is provided only for backwards compatibility.
	Only enable it if your userspace software requires it.

	If unsure, say N.

	config FAST_SYSCALL_SPILL_REGISTERS
	bool "Enable spill registers syscall"
	default n
	help
	fast_syscall_spill_registers is a syscall that spills all active
	register windows of a calling userspace task onto its stack.

	This syscall is deprecated. It may have issues when called with
	invalid arguments. It is provided only for backwards compatibility.
	Only enable it if your userspace software requires it.

	If unsure, say N.

	endmenu

	config XTENSA_CALIBRATE_CCOUNT
	def_bool n
	help
	On some platforms (XT2000, for example), the CPU clock rate can
	vary. The frequency can be determined, however, by measuring
	against a well known, fixed frequency, such as an UART oscillator.

	config SERIAL_CONSOLE
	def_bool n

	menu "Bus options"

	config PCI
	bool "PCI support"
	default y
	help
	Find out whether you have a PCI motherboard. PCI is the name of a
	bus system, i.e. the way the CPU talks to the other stuff inside
	your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	VESA. If you have PCI, say Y, otherwise N.

	source "drivers/pci/Kconfig"

	endmenu

	menu "Platform options"

	choice
	prompt "Xtensa System Type"
	default XTENSA_PLATFORM_ISS

	config XTENSA_PLATFORM_ISS
	bool "ISS"
	select XTENSA_CALIBRATE_CCOUNT
	select SERIAL_CONSOLE
	help
	ISS is an acronym for Tensilica's Instruction Set Simulator.

	config XTENSA_PLATFORM_XT2000
	bool "XT2000"
	select HAVE_IDE
	help
	XT2000 is the name of Tensilica's feature-rich emulation platform.
	This hardware is capable of running a full Linux distribution.

	config XTENSA_PLATFORM_S6105
	bool "S6105"
	select HAVE_IDE
	select SERIAL_CONSOLE
	select NO_IOPORT_MAP

	config XTENSA_PLATFORM_XTFPGA
	bool "XTFPGA"
	select ETHOC if ETHERNET
	select SERIAL_CONSOLE
	select XTENSA_CALIBRATE_CCOUNT
	help
	XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
	This hardware is capable of running a full Linux distribution.

	endchoice


	config XTENSA_CPU_CLOCK
	int "CPU clock rate [MHz]"
	depends on !XTENSA_CALIBRATE_CCOUNT
	default 16

	config GENERIC_CALIBRATE_DELAY
	bool "Auto calibration of the BogoMIPS value"
	help
	The BogoMIPS value can easily be derived from the CPU frequency.

	config CMDLINE_BOOL
	bool "Default bootloader kernel arguments"

	config CMDLINE
	string "Initial kernel command string"
	depends on CMDLINE_BOOL
	default "console=ttyS0,38400 root=/dev/ram"
	help
	On some architectures (EBSA110 and CATS), there is currently no way
	for the boot loader to pass arguments to the kernel. For these
	architectures, you should supply some command-line options at build
	time by entering them here. As a minimum, you should specify the
	memory size and the root device (e.g., mem=64M root=/dev/nfs).

	config USE_OF
	bool "Flattened Device Tree support"
	select OF
	select OF_EARLY_FLATTREE
	help
	Include support for flattened device tree machine descriptions.

	config BUILTIN_DTB
	string "DTB to build into the kernel image"
	depends on OF

	config BLK_DEV_SIMDISK
	tristate "Host file-based simulated block device support"
	default n
	depends on XTENSA_PLATFORM_ISS && BLOCK
	help
	Create block devices that map to files in the host file system.
	Device binding to host file may be changed at runtime via proc
	interface provided the device is not in use.

	config BLK_DEV_SIMDISK_COUNT
	int "Number of host file-based simulated block devices"
	range 1 10
	depends on BLK_DEV_SIMDISK
	default 2
	help
	This is the default minimal number of created block devices.
	Kernel/module parameter 'simdisk_count' may be used to change this
	value at runtime. More file names (but no more than 10) may be
	specified as parameters, simdisk_count grows accordingly.

	config SIMDISK0_FILENAME
	string "Host filename for the first simulated device"
	depends on BLK_DEV_SIMDISK = y
	default ""
	help
	Attach a first simdisk to a host file. Conventionally, this file
	contains a root file system.

	config SIMDISK1_FILENAME
	string "Host filename for the second simulated device"
	depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1
	default ""
	help
	Another simulated disk in a host file for a buildroot-independent
	storage.

	source "mm/Kconfig"

	source "drivers/pcmcia/Kconfig"

	source "drivers/pci/hotplug/Kconfig"

	endmenu

	menu "Executable file formats"

	source "fs/Kconfig.binfmt"

	endmenu

	source "net/Kconfig"

	source "drivers/Kconfig"

	source "fs/Kconfig"

	source "arch/xtensa/Kconfig.debug"

	source "security/Kconfig"

	source "crypto/Kconfig"

	source "lib/Kconfig"