MSM: Add USB support for MSM7x30
Add USB OTG, peripheral and host devices. This patch also adds
usb_phy_clk which is required for resetting the PHY. VBUS power up
and shutdown routines depends on PMIC module. As PMIC driver is
unavailable, configure USB in peripheral only mode.
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 05241df..6f3b973 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/usb/msm_hsusb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,11 +40,26 @@
extern struct sys_timer msm_timer;
+static int hsusb_phy_init_seq[] = {
+ 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
+ 0x02, 0x36, /* Disable CDR Auto Reset feature */
+ -1
+};
+
+static struct msm_otg_platform_data msm_otg_pdata = {
+ .phy_init_seq = hsusb_phy_init_seq,
+ .mode = USB_PERIPHERAL,
+ .otg_control = OTG_PHY_CONTROL,
+};
+
static struct platform_device *devices[] __initdata = {
#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
&msm_device_uart2,
#endif
&msm_device_smd,
+ &msm_device_otg,
+ &msm_device_hsusb,
+ &msm_device_hsusb_host,
};
static void __init msm7x30_init_irq(void)
@@ -53,6 +69,10 @@
static void __init msm7x30_init(void)
{
+ msm_device_otg.dev.platform_data = &msm_otg_pdata;
+ msm_device_hsusb.dev.parent = &msm_device_otg.dev;
+ msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index 7fcf2e3..4e9a0ab 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -56,6 +56,77 @@
.id = -1,
};
+static struct resource resources_otg[] = {
+ {
+ .start = MSM_HSUSB_PHYS,
+ .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_USB_HS,
+ .end = INT_USB_HS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device msm_device_otg = {
+ .name = "msm_otg",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resources_otg),
+ .resource = resources_otg,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static struct resource resources_hsusb[] = {
+ {
+ .start = MSM_HSUSB_PHYS,
+ .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_USB_HS,
+ .end = INT_USB_HS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device msm_device_hsusb = {
+ .name = "msm_hsusb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resources_hsusb),
+ .resource = resources_hsusb,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static u64 dma_mask = 0xffffffffULL;
+static struct resource resources_hsusb_host[] = {
+ {
+ .start = MSM_HSUSB_PHYS,
+ .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_USB_HS,
+ .end = INT_USB_HS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device msm_device_hsusb_host = {
+ .name = "msm_hsusb_host",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resources_hsusb_host),
+ .resource = resources_hsusb_host,
+ .dev = {
+ .dma_mask = &dma_mask,
+ .coherent_dma_mask = 0xffffffffULL,
+ },
+};
+
struct clk msm_clocks_7x30[] = {
CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0),
@@ -107,6 +178,7 @@
CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0),
CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0),
CLK_PCOM("uart_clk", UART2_CLK, &msm_device_uart2.dev, 0),
+ CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0),
CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF),
CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF),
CLK_PCOM("usb_hs_core_clk", USB_HS_CORE_CLK, NULL, OFF),
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
index 8a00c2d..0fd7b68 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -119,4 +119,7 @@
#define MSM_AD5_PHYS 0xA7000000
#define MSM_AD5_SIZE (SZ_1M*13)
+#define MSM_HSUSB_PHYS 0xA3600000
+#define MSM_HSUSB_SIZE SZ_1K
+
#endif