[media] saa7134: use pr_warn() on some places where no KERN_foo were used
On a few places, mostly during board detection, some printk()
macros were called without especifying any message level.
Those are actually warnings. So, use pr_warn() for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c
index 5b81157..abbeeb9 100644
--- a/drivers/media/pci/saa7134/saa7134-cards.c
+++ b/drivers/media/pci/saa7134/saa7134-cards.c
@@ -7159,10 +7159,10 @@
static void board_flyvideo(struct saa7134_dev *dev)
{
- printk("%s: there are different flyvideo cards with different tuners\n"
- "%s: out there, you might have to use the tuner=<nr> insmod\n"
- "%s: option to override the default value.\n",
- dev->name, dev->name, dev->name);
+ pr_warn("%s: there are different flyvideo cards with different tuners\n"
+ "%s: out there, you might have to use the tuner=<nr> insmod\n"
+ "%s: option to override the default value.\n",
+ dev->name, dev->name, dev->name);
}
static int saa7134_xc2028_callback(struct saa7134_dev *dev,
@@ -7513,10 +7513,10 @@
dev->has_remote = SAA7134_REMOTE_GPIO;
break;
case SAA7134_BOARD_MD5044:
- printk("%s: seems there are two different versions of the MD5044\n"
- "%s: (with the same ID) out there. If sound doesn't work for\n"
- "%s: you try the audio_clock_override=0x200000 insmod option.\n",
- dev->name,dev->name,dev->name);
+ pr_warn("%s: seems there are two different versions of the MD5044\n"
+ "%s: (with the same ID) out there. If sound doesn't work for\n"
+ "%s: you try the audio_clock_override=0x200000 insmod option.\n",
+ dev->name,dev->name,dev->name);
break;
case SAA7134_BOARD_CINERGY400_CARDBUS:
/* power-up tuner chip */
@@ -7641,10 +7641,10 @@
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_A169_B:
- printk("%s: %s: dual saa713x broadcast decoders\n"
- "%s: Sorry, none of the inputs to this chip are supported yet.\n"
- "%s: Dual decoder functionality is disabled for now, use the other chip.\n",
- dev->name,card(dev).name,dev->name,dev->name);
+ pr_warn("%s: %s: dual saa713x broadcast decoders\n"
+ "%s: Sorry, none of the inputs to this chip are supported yet.\n"
+ "%s: Dual decoder functionality is disabled for now, use the other chip.\n",
+ dev->name,card(dev).name,dev->name,dev->name);
break;
case SAA7134_BOARD_AVERMEDIA_M102:
/* enable tuner */
@@ -7790,7 +7790,7 @@
if (board == dev->board)
break;
dev->board = board;
- printk("%s: board type fixup: %s\n", dev->name,
+ pr_warn("%s: board type fixup: %s\n", dev->name,
saa7134_boards[dev->board].name);
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
@@ -8047,7 +8047,7 @@
msg.len = ARRAY_SIZE(buffer[0]);
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
pr_warn("%s: Unable to enable tuner(%i).\n",
- dev->name, i);
+ dev->name, i);
}
break;
}
diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c
index c206148..83dbb44 100644
--- a/drivers/media/pci/saa7134/saa7134-core.c
+++ b/drivers/media/pci/saa7134/saa7134-core.c
@@ -947,7 +947,7 @@
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
pci_set_master(pci_dev);
if (!pci_dma_supported(pci_dev, DMA_BIT_MASK(32))) {
- printk("%s: Oops: no 32bit PCI DMA ???\n",dev->name);
+ pr_warn("%s: Oops: no 32bit PCI DMA ???\n", dev->name);
err = -EIO;
goto fail1;
}