[ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 4cac926..98ded45 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -269,46 +269,9 @@
*/
/*
- * Serial Audio Controller
+ * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
*/
-#define SACR0 __REG(0x40400000) /* Global Control Register */
-#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
-#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
-#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
-#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
-#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
-
-#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
-#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
-#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
-#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
-#define SACR0_ENB (1 << 0) /* Enable I2S Link */
-#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
-#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
-#define SACR1_DREC (1 << 3) /* Disable Recording Function */
-#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
-
-#define SASR0_I2SOFF (1 << 7) /* Controller Status */
-#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
-#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
-#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
-#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
-#define SASR0_BSY (1 << 2) /* I2S Busy */
-#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
-#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
-
-#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
-#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
-
-#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
-#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
-#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
-#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
-
/*
* AC97 Controller registers
*/
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 2dbe612..ad4c31dd 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -30,6 +30,46 @@
#include "pxa2xx-pcm.h"
#include "pxa2xx-i2s.h"
+/*
+ * I2S Controller Register and Bit Definitions
+ */
+#define SACR0 __REG(0x40400000) /* Global Control Register */
+#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
+#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
+#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
+#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
+#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
+#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
+#define SACR0_ENB (1 << 0) /* Enable I2S Link */
+#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
+#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
+#define SACR1_DREC (1 << 3) /* Disable Recording Function */
+#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
+
+#define SASR0_I2SOFF (1 << 7) /* Controller Status */
+#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
+#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
+#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
+#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
+#define SASR0_BSY (1 << 2) /* I2S Busy */
+#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
+#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
+
+#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
+
struct pxa_i2s_port {
u32 sadiv;
u32 sacr0;