drivers/i2c/busses/i2c-prosavage.c - kernel/msm-4.19 - Gitiles

 /*
  *    kernel/busses/i2c-prosavage.c
  *
  *    i2c bus driver for S3/VIA 8365/8375 graphics processor.
  *    Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org>
  *    Based on code written by:
  *	Frodo Looijaard <frodol@dds.nl>,
  *	Philip Edelbrock <phil@netroedge.com>,
  *	Ralph Metzler <rjkm@thp.uni-koeln.de>, and
  *	Mark D. Studebaker <mdsxyz123@yahoo.com>
  *	Simon Vogl
  *	and others
  *
  *    Please read the lm_sensors documentation for details on use.
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
  *    the Free Software Foundation; either version 2 of the License, or
  *    (at your option) any later version.
  *
  *    This program is distributed in the hope that it will be useful,
  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *    GNU General Public License for more details.
  *
  *    You should have received a copy of the GNU General Public License
  *    along with this program; if not, write to the Free Software
  *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
 /*  18-05-2003 HVE - created
  *  14-06-2003 HVE - adapted for lm_sensors2
  *  17-06-2003 HVE - linux 2.5.xx compatible
  *  18-06-2003 HVE - codingstyle
  *  21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
  *		     codingstyle, mmio enabled
  *
  *  This driver interfaces to the I2C bus of the VIA north bridge embedded
  *  ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
  *
  *  Graphics cores:
  *   S3/VIA KM266/VT8375 aka ProSavage8
  *   S3/VIA KM133/VT8365 aka Savage4
  *
  *  Two serial busses are implemented:
  *   SERIAL1 - I2C serial communications interface
  *   SERIAL2 - DDC2 monitor communications interface
  *
  *  Tested on a FX41 mainboard, see http://www.shuttle.com
  *
  *
  *  TODO:
  *  - integration with prosavage framebuffer device
  *    (Additional documentation needed :(
  */

 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <asm/io.h>

 /*
  * driver configuration
  */
 #define MAX_BUSSES	2

 struct s_i2c_bus {
 	void __iomem *mmvga;
 	int	i2c_reg;
 	int	adap_ok;
 	struct i2c_adapter		adap;
 	struct i2c_algo_bit_data	algo;
 };

 struct s_i2c_chip {
 	void __iomem *mmio;
 	struct s_i2c_bus	i2c_bus[MAX_BUSSES];
 };


 /*
  * i2c configuration
  */
 #ifndef I2C_HW_B_S3VIA
 #define I2C_HW_B_S3VIA	0x18	/* S3VIA ProSavage adapter		*/
 #endif

 /* delays */
 #define CYCLE_DELAY	10
 #define TIMEOUT		(HZ / 2)


 /*
  * S3/VIA 8365/8375 registers
  */
 #define VGA_CR_IX	0x3d4
 #define VGA_CR_DATA	0x3d5

 #define CR_SERIAL1	0xa0	/* I2C serial communications interface */
 #define MM_SERIAL1	0xff20
 #define CR_SERIAL2	0xb1	/* DDC2 monitor communications interface */

 /* based on vt8365 documentation */
 #define I2C_ENAB	0x10
 #define I2C_SCL_OUT	0x01
 #define I2C_SDA_OUT	0x02
 #define I2C_SCL_IN	0x04
 #define I2C_SDA_IN	0x08

 #define SET_CR_IX(p, val)	writeb((val), (p)->mmvga + VGA_CR_IX)
 #define SET_CR_DATA(p, val)	writeb((val), (p)->mmvga + VGA_CR_DATA)
 #define GET_CR_DATA(p)		readb((p)->mmvga + VGA_CR_DATA)


 /*
  * Serial bus line handling
  *
  * serial communications register as parameter in private data
  *
  * TODO: locks with other code sections accessing video registers?
  */
 static void bit_s3via_setscl(void *bus, int val)
 {
 	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
 	unsigned int r;

 	SET_CR_IX(p, p->i2c_reg);
 	r = GET_CR_DATA(p);
 	r |= I2C_ENAB;
 	if (val) {
 		r |= I2C_SCL_OUT;
 	} else {
 		r &= ~I2C_SCL_OUT;
 	}
 	SET_CR_DATA(p, r);
 }

 static void bit_s3via_setsda(void *bus, int val)
 {
 	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
 	unsigned int r;

 	SET_CR_IX(p, p->i2c_reg);
 	r = GET_CR_DATA(p);
 	r |= I2C_ENAB;
 	if (val) {
 		r |= I2C_SDA_OUT;
 	} else {
 		r &= ~I2C_SDA_OUT;
 	}
 	SET_CR_DATA(p, r);
 }

 static int bit_s3via_getscl(void *bus)
 {
 	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;

 	SET_CR_IX(p, p->i2c_reg);
 	return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
 }

 static int bit_s3via_getsda(void *bus)
 {
 	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;

 	SET_CR_IX(p, p->i2c_reg);
 	return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
 }


 /*
  * adapter initialisation
  */
 static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg)
 {
 	int ret;
 	p->adap.owner	  = THIS_MODULE;
 	p->adap.id	  = I2C_HW_B_S3VIA;
 	p->adap.algo_data = &p->algo;
 	p->adap.dev.parent = &dev->dev;
 	p->algo.setsda	  = bit_s3via_setsda;
 	p->algo.setscl	  = bit_s3via_setscl;
 	p->algo.getsda	  = bit_s3via_getsda;
 	p->algo.getscl	  = bit_s3via_getscl;
 	p->algo.udelay	  = CYCLE_DELAY;
 	p->algo.mdelay	  = CYCLE_DELAY;
 	p->algo.timeout	  = TIMEOUT;
 	p->algo.data	  = p;
 	p->mmvga	  = mmvga;
 	p->i2c_reg	  = i2c_reg;

 	ret = i2c_bit_add_bus(&p->adap);
 	if (ret) {
 		return ret;
 	}

 	p->adap_ok = 1;
 	return 0;
 }


 /*
  * Cleanup stuff
  */
 static void prosavage_remove(struct pci_dev *dev)
 {
 	struct s_i2c_chip *chip;
 	int i, ret;

 	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);

 	if (!chip) {
 		return;
 	}
 	for (i = MAX_BUSSES - 1; i >= 0; i--) {
 		if (chip->i2c_bus[i].adap_ok == 0)
 			continue;

 		ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
 	        if (ret) {
 			dev_err(&dev->dev, "%s not removed\n",
 				chip->i2c_bus[i].adap.name);
 		}
 	}
 	if (chip->mmio) {
 		iounmap(chip->mmio);
 	}
 	kfree(chip);
 }


 /*
  * Detect chip and initialize it
  */
 static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	int ret;
 	unsigned long base, len;
 	struct s_i2c_chip *chip;
 	struct s_i2c_bus  *bus;

 	pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
 	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
 	if (chip == NULL) {
 		return -ENOMEM;
 	}

 	base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
 	len  = dev->resource[0].end - base + 1;
 	chip->mmio = ioremap_nocache(base, len);

 	if (chip->mmio == NULL) {
 		dev_err(&dev->dev, "ioremap failed\n");
 		prosavage_remove(dev);
 		return -ENODEV;
 	}


 	/*
 	 * Chip initialisation
 	 */
 	/* Unlock Extended IO Space ??? */


 	/*
 	 * i2c bus registration
 	 */
 	bus = &chip->i2c_bus[0];
 	snprintf(bus->adap.name, sizeof(bus->adap.name),
 		"ProSavage I2C bus at %02x:%02x.%x",
 		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
 	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
 	if (ret) {
 		goto err_adap;
 	}
 	/*
 	 * ddc bus registration
 	 */
 	bus = &chip->i2c_bus[1];
 	snprintf(bus->adap.name, sizeof(bus->adap.name),
 		"ProSavage DDC bus at %02x:%02x.%x",
 		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
 	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
 	if (ret) {
 		goto err_adap;
 	}
 	return 0;
 err_adap:
 	dev_err(&dev->dev, "%s failed\n", bus->adap.name);
 	prosavage_remove(dev);
 	return ret;
 }


 /*
  * Data for PCI driver interface
  */
 static struct pci_device_id prosavage_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) },
 	{ 0, },
 };

 MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);

 static struct pci_driver prosavage_driver = {
 	.owner		=	THIS_MODULE,
 	.name		=	"prosavage_smbus",
 	.id_table	=	prosavage_pci_tbl,
 	.probe		=	prosavage_probe,
 	.remove		=	prosavage_remove,
 };

 static int __init i2c_prosavage_init(void)
 {
 	return pci_register_driver(&prosavage_driver);
 }

 static void __exit i2c_prosavage_exit(void)
 {
 	pci_unregister_driver(&prosavage_driver);
 }

 MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
 MODULE_AUTHOR("Henk Vergonet");
 MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
 MODULE_LICENSE("GPL");

 module_init (i2c_prosavage_init);
 module_exit (i2c_prosavage_exit);
	/*
	* kernel/busses/i2c-prosavage.c
	*
	* i2c bus driver for S3/VIA 8365/8375 graphics processor.
	* Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org>
	* Based on code written by:
	* Frodo Looijaard <frodol@dds.nl>,
	* Philip Edelbrock <phil@netroedge.com>,
	* Ralph Metzler <rjkm@thp.uni-koeln.de>, and
	* Mark D. Studebaker <mdsxyz123@yahoo.com>
	* Simon Vogl
	* and others
	*
	* Please read the lm_sensors documentation for details on use.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*
	*/
	/* 18-05-2003 HVE - created
	* 14-06-2003 HVE - adapted for lm_sensors2
	* 17-06-2003 HVE - linux 2.5.xx compatible
	* 18-06-2003 HVE - codingstyle
	* 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
	* codingstyle, mmio enabled
	*
	* This driver interfaces to the I2C bus of the VIA north bridge embedded
	* ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
	*
	* Graphics cores:
	* S3/VIA KM266/VT8375 aka ProSavage8
	* S3/VIA KM133/VT8365 aka Savage4
	*
	* Two serial busses are implemented:
	* SERIAL1 - I2C serial communications interface
	* SERIAL2 - DDC2 monitor communications interface
	*
	* Tested on a FX41 mainboard, see http://www.shuttle.com
	*
	*
	* TODO:
	* - integration with prosavage framebuffer device
	* (Additional documentation needed :(
	*/

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/pci.h>
	#include <linux/i2c.h>
	#include <linux/i2c-algo-bit.h>
	#include <asm/io.h>

	/*
	* driver configuration
	*/
	#define MAX_BUSSES 2

	struct s_i2c_bus {
	void __iomem *mmvga;
	int i2c_reg;
	int adap_ok;
	struct i2c_adapter adap;
	struct i2c_algo_bit_data algo;
	};

	struct s_i2c_chip {
	void __iomem *mmio;
	struct s_i2c_bus i2c_bus[MAX_BUSSES];
	};


	/*
	* i2c configuration
	*/
	#ifndef I2C_HW_B_S3VIA
	#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */
	#endif

	/* delays */
	#define CYCLE_DELAY 10
	#define TIMEOUT (HZ / 2)


	/*
	* S3/VIA 8365/8375 registers
	*/
	#define VGA_CR_IX 0x3d4
	#define VGA_CR_DATA 0x3d5

	#define CR_SERIAL1 0xa0 /* I2C serial communications interface */
	#define MM_SERIAL1 0xff20
	#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */

	/* based on vt8365 documentation */
	#define I2C_ENAB 0x10
	#define I2C_SCL_OUT 0x01
	#define I2C_SDA_OUT 0x02
	#define I2C_SCL_IN 0x04
	#define I2C_SDA_IN 0x08

	#define SET_CR_IX(p, val) writeb((val), (p)->mmvga + VGA_CR_IX)
	#define SET_CR_DATA(p, val) writeb((val), (p)->mmvga + VGA_CR_DATA)
	#define GET_CR_DATA(p) readb((p)->mmvga + VGA_CR_DATA)


	/*
	* Serial bus line handling
	*
	* serial communications register as parameter in private data
	*
	* TODO: locks with other code sections accessing video registers?
	*/
	static void bit_s3via_setscl(void *bus, int val)
	{
	struct s_i2c_bus p = (struct s_i2c_bus )bus;
	unsigned int r;

	SET_CR_IX(p, p->i2c_reg);
	r = GET_CR_DATA(p);
	r \|= I2C_ENAB;
	if (val) {
	r \|= I2C_SCL_OUT;
	} else {
	r &= ~I2C_SCL_OUT;
	}
	SET_CR_DATA(p, r);
	}

	static void bit_s3via_setsda(void *bus, int val)
	{
	struct s_i2c_bus p = (struct s_i2c_bus )bus;
	unsigned int r;

	SET_CR_IX(p, p->i2c_reg);
	r = GET_CR_DATA(p);
	r \|= I2C_ENAB;
	if (val) {
	r \|= I2C_SDA_OUT;
	} else {
	r &= ~I2C_SDA_OUT;
	}
	SET_CR_DATA(p, r);
	}

	static int bit_s3via_getscl(void *bus)
	{
	struct s_i2c_bus p = (struct s_i2c_bus )bus;

	SET_CR_IX(p, p->i2c_reg);
	return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
	}

	static int bit_s3via_getsda(void *bus)
	{
	struct s_i2c_bus p = (struct s_i2c_bus )bus;

	SET_CR_IX(p, p->i2c_reg);
	return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
	}


	/*
	* adapter initialisation
	*/
	static int i2c_register_bus(struct pci_dev dev, struct s_i2c_bus p, void __iomem *mmvga, u32 i2c_reg)
	{
	int ret;
	p->adap.owner = THIS_MODULE;
	p->adap.id = I2C_HW_B_S3VIA;
	p->adap.algo_data = &p->algo;
	p->adap.dev.parent = &dev->dev;
	p->algo.setsda = bit_s3via_setsda;
	p->algo.setscl = bit_s3via_setscl;
	p->algo.getsda = bit_s3via_getsda;
	p->algo.getscl = bit_s3via_getscl;
	p->algo.udelay = CYCLE_DELAY;
	p->algo.mdelay = CYCLE_DELAY;
	p->algo.timeout = TIMEOUT;
	p->algo.data = p;
	p->mmvga = mmvga;
	p->i2c_reg = i2c_reg;

	ret = i2c_bit_add_bus(&p->adap);
	if (ret) {
	return ret;
	}

	p->adap_ok = 1;
	return 0;
	}


	/*
	* Cleanup stuff
	*/
	static void prosavage_remove(struct pci_dev *dev)
	{
	struct s_i2c_chip *chip;
	int i, ret;

	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);

	if (!chip) {
	return;
	}
	for (i = MAX_BUSSES - 1; i >= 0; i--) {
	if (chip->i2c_bus[i].adap_ok == 0)
	continue;

	ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
	if (ret) {
	dev_err(&dev->dev, "%s not removed\n",
	chip->i2c_bus[i].adap.name);
	}
	}
	if (chip->mmio) {
	iounmap(chip->mmio);
	}
	kfree(chip);
	}


	/*
	* Detect chip and initialize it
	*/
	static int __devinit prosavage_probe(struct pci_dev dev, const struct pci_device_id id)
	{
	int ret;
	unsigned long base, len;
	struct s_i2c_chip *chip;
	struct s_i2c_bus *bus;

	pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
	if (chip == NULL) {
	return -ENOMEM;
	}

	base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
	len = dev->resource[0].end - base + 1;
	chip->mmio = ioremap_nocache(base, len);

	if (chip->mmio == NULL) {
	dev_err(&dev->dev, "ioremap failed\n");
	prosavage_remove(dev);
	return -ENODEV;
	}


	/*
	* Chip initialisation
	*/
	/* Unlock Extended IO Space ??? */


	/*
	* i2c bus registration
	*/
	bus = &chip->i2c_bus[0];
	snprintf(bus->adap.name, sizeof(bus->adap.name),
	"ProSavage I2C bus at %02x:%02x.%x",
	dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
	if (ret) {
	goto err_adap;
	}
	/*
	* ddc bus registration
	*/
	bus = &chip->i2c_bus[1];
	snprintf(bus->adap.name, sizeof(bus->adap.name),
	"ProSavage DDC bus at %02x:%02x.%x",
	dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
	if (ret) {
	goto err_adap;
	}
	return 0;
	err_adap:
	dev_err(&dev->dev, "%s failed\n", bus->adap.name);
	prosavage_remove(dev);
	return ret;
	}


	/*
	* Data for PCI driver interface
	*/
	static struct pci_device_id prosavage_pci_tbl[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) },
	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) },
	{ 0, },
	};

	MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);

	static struct pci_driver prosavage_driver = {
	.owner = THIS_MODULE,
	.name = "prosavage_smbus",
	.id_table = prosavage_pci_tbl,
	.probe = prosavage_probe,
	.remove = prosavage_remove,
	};

	static int __init i2c_prosavage_init(void)
	{
	return pci_register_driver(&prosavage_driver);
	}

	static void __exit i2c_prosavage_exit(void)
	{
	pci_unregister_driver(&prosavage_driver);
	}

	MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
	MODULE_AUTHOR("Henk Vergonet");
	MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
	MODULE_LICENSE("GPL");

	module_init (i2c_prosavage_init);
	module_exit (i2c_prosavage_exit);