| /* |
| * Memory subsystem support |
| * |
| * Written by Matt Tolentino <matthew.e.tolentino@intel.com> |
| * Dave Hansen <haveblue@us.ibm.com> |
| * |
| * This file provides the necessary infrastructure to represent |
| * a SPARSEMEM-memory-model system's physical memory in /sysfs. |
| * All arch-independent code that assumes MEMORY_HOTPLUG requires |
| * SPARSEMEM should be contained here, or in mm/memory_hotplug.c. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/topology.h> |
| #include <linux/capability.h> |
| #include <linux/device.h> |
| #include <linux/memory.h> |
| #include <linux/memory_hotplug.h> |
| #include <linux/mm.h> |
| #include <linux/mutex.h> |
| #include <linux/stat.h> |
| #include <linux/slab.h> |
| |
| #include <linux/atomic.h> |
| #include <linux/uaccess.h> |
| |
| static DEFINE_MUTEX(mem_sysfs_mutex); |
| |
| #define MEMORY_CLASS_NAME "memory" |
| |
| #define to_memory_block(dev) container_of(dev, struct memory_block, dev) |
| |
| static int sections_per_block; |
| |
| static inline int base_memory_block_id(int section_nr) |
| { |
| return section_nr / sections_per_block; |
| } |
| |
| static int memory_subsys_online(struct device *dev); |
| static int memory_subsys_offline(struct device *dev); |
| |
| static struct bus_type memory_subsys = { |
| .name = MEMORY_CLASS_NAME, |
| .dev_name = MEMORY_CLASS_NAME, |
| .online = memory_subsys_online, |
| .offline = memory_subsys_offline, |
| }; |
| |
| static BLOCKING_NOTIFIER_HEAD(memory_chain); |
| |
| int register_memory_notifier(struct notifier_block *nb) |
| { |
| return blocking_notifier_chain_register(&memory_chain, nb); |
| } |
| EXPORT_SYMBOL(register_memory_notifier); |
| |
| void unregister_memory_notifier(struct notifier_block *nb) |
| { |
| blocking_notifier_chain_unregister(&memory_chain, nb); |
| } |
| EXPORT_SYMBOL(unregister_memory_notifier); |
| |
| static ATOMIC_NOTIFIER_HEAD(memory_isolate_chain); |
| |
| int register_memory_isolate_notifier(struct notifier_block *nb) |
| { |
| return atomic_notifier_chain_register(&memory_isolate_chain, nb); |
| } |
| EXPORT_SYMBOL(register_memory_isolate_notifier); |
| |
| void unregister_memory_isolate_notifier(struct notifier_block *nb) |
| { |
| atomic_notifier_chain_unregister(&memory_isolate_chain, nb); |
| } |
| EXPORT_SYMBOL(unregister_memory_isolate_notifier); |
| |
| static void memory_block_release(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| |
| kfree(mem); |
| } |
| |
| unsigned long __weak memory_block_size_bytes(void) |
| { |
| return MIN_MEMORY_BLOCK_SIZE; |
| } |
| |
| static unsigned long get_memory_block_size(void) |
| { |
| unsigned long block_sz; |
| |
| block_sz = memory_block_size_bytes(); |
| |
| /* Validate blk_sz is a power of 2 and not less than section size */ |
| if ((block_sz & (block_sz - 1)) || (block_sz < MIN_MEMORY_BLOCK_SIZE)) { |
| WARN_ON(1); |
| block_sz = MIN_MEMORY_BLOCK_SIZE; |
| } |
| |
| return block_sz; |
| } |
| |
| /* |
| * use this as the physical section index that this memsection |
| * uses. |
| */ |
| |
| static ssize_t show_mem_start_phys_index(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| unsigned long phys_index; |
| |
| phys_index = mem->start_section_nr / sections_per_block; |
| return sprintf(buf, "%08lx\n", phys_index); |
| } |
| |
| /* |
| * Show whether the section of memory is likely to be hot-removable |
| */ |
| static ssize_t show_mem_removable(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned long i, pfn; |
| int ret = 1; |
| struct memory_block *mem = to_memory_block(dev); |
| |
| if (mem->state != MEM_ONLINE) |
| goto out; |
| |
| for (i = 0; i < sections_per_block; i++) { |
| if (!present_section_nr(mem->start_section_nr + i)) |
| continue; |
| pfn = section_nr_to_pfn(mem->start_section_nr + i); |
| ret &= is_mem_section_removable(pfn, PAGES_PER_SECTION); |
| } |
| |
| out: |
| return sprintf(buf, "%d\n", ret); |
| } |
| |
| /* |
| * online, offline, going offline, etc. |
| */ |
| static ssize_t show_mem_state(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| ssize_t len = 0; |
| |
| /* |
| * We can probably put these states in a nice little array |
| * so that they're not open-coded |
| */ |
| switch (mem->state) { |
| case MEM_ONLINE: |
| len = sprintf(buf, "online\n"); |
| break; |
| case MEM_OFFLINE: |
| len = sprintf(buf, "offline\n"); |
| break; |
| case MEM_GOING_OFFLINE: |
| len = sprintf(buf, "going-offline\n"); |
| break; |
| default: |
| len = sprintf(buf, "ERROR-UNKNOWN-%ld\n", |
| mem->state); |
| WARN_ON(1); |
| break; |
| } |
| |
| return len; |
| } |
| |
| int memory_notify(unsigned long val, void *v) |
| { |
| return blocking_notifier_call_chain(&memory_chain, val, v); |
| } |
| |
| int memory_isolate_notify(unsigned long val, void *v) |
| { |
| return atomic_notifier_call_chain(&memory_isolate_chain, val, v); |
| } |
| |
| /* |
| * The probe routines leave the pages reserved, just as the bootmem code does. |
| * Make sure they're still that way. |
| */ |
| static bool pages_correctly_reserved(unsigned long start_pfn) |
| { |
| int i, j; |
| struct page *page; |
| unsigned long pfn = start_pfn; |
| |
| /* |
| * memmap between sections is not contiguous except with |
| * SPARSEMEM_VMEMMAP. We lookup the page once per section |
| * and assume memmap is contiguous within each section |
| */ |
| for (i = 0; i < sections_per_block; i++, pfn += PAGES_PER_SECTION) { |
| if (WARN_ON_ONCE(!pfn_valid(pfn))) |
| return false; |
| page = pfn_to_page(pfn); |
| |
| for (j = 0; j < PAGES_PER_SECTION; j++) { |
| if (PageReserved(page + j)) |
| continue; |
| |
| printk(KERN_WARNING "section number %ld page number %d " |
| "not reserved, was it already online?\n", |
| pfn_to_section_nr(pfn), j); |
| |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| /* |
| * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is |
| * OK to have direct references to sparsemem variables in here. |
| * Must already be protected by mem_hotplug_begin(). |
| */ |
| static int |
| memory_block_action(unsigned long phys_index, unsigned long action, int online_type) |
| { |
| unsigned long start_pfn; |
| unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; |
| int ret; |
| |
| start_pfn = section_nr_to_pfn(phys_index); |
| |
| switch (action) { |
| case MEM_ONLINE: |
| if (!pages_correctly_reserved(start_pfn)) |
| return -EBUSY; |
| |
| ret = online_pages(start_pfn, nr_pages, online_type); |
| break; |
| case MEM_OFFLINE: |
| ret = offline_pages(start_pfn, nr_pages); |
| break; |
| default: |
| WARN(1, KERN_WARNING "%s(%ld, %ld) unknown action: " |
| "%ld\n", __func__, phys_index, action, action); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int memory_block_change_state(struct memory_block *mem, |
| unsigned long to_state, unsigned long from_state_req) |
| { |
| int ret = 0; |
| |
| if (mem->state != from_state_req) |
| return -EINVAL; |
| |
| if (to_state == MEM_OFFLINE) |
| mem->state = MEM_GOING_OFFLINE; |
| |
| ret = memory_block_action(mem->start_section_nr, to_state, |
| mem->online_type); |
| |
| mem->state = ret ? from_state_req : to_state; |
| |
| return ret; |
| } |
| |
| /* The device lock serializes operations on memory_subsys_[online|offline] */ |
| static int memory_subsys_online(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| int ret; |
| |
| if (mem->state == MEM_ONLINE) |
| return 0; |
| |
| /* |
| * If we are called from store_mem_state(), online_type will be |
| * set >= 0 Otherwise we were called from the device online |
| * attribute and need to set the online_type. |
| */ |
| if (mem->online_type < 0) |
| mem->online_type = MMOP_ONLINE_KEEP; |
| |
| /* Already under protection of mem_hotplug_begin() */ |
| ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE); |
| |
| /* clear online_type */ |
| mem->online_type = -1; |
| |
| return ret; |
| } |
| |
| static int memory_subsys_offline(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| |
| if (mem->state == MEM_OFFLINE) |
| return 0; |
| |
| /* Can't offline block with non-present sections */ |
| if (mem->section_count != sections_per_block) |
| return -EINVAL; |
| |
| return memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE); |
| } |
| |
| static ssize_t |
| store_mem_state(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| int ret, online_type; |
| |
| ret = lock_device_hotplug_sysfs(); |
| if (ret) |
| return ret; |
| |
| if (sysfs_streq(buf, "online_kernel")) |
| online_type = MMOP_ONLINE_KERNEL; |
| else if (sysfs_streq(buf, "online_movable")) |
| online_type = MMOP_ONLINE_MOVABLE; |
| else if (sysfs_streq(buf, "online")) |
| online_type = MMOP_ONLINE_KEEP; |
| else if (sysfs_streq(buf, "offline")) |
| online_type = MMOP_OFFLINE; |
| else { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* |
| * Memory hotplug needs to hold mem_hotplug_begin() for probe to find |
| * the correct memory block to online before doing device_online(dev), |
| * which will take dev->mutex. Take the lock early to prevent an |
| * inversion, memory_subsys_online() callbacks will be implemented by |
| * assuming it's already protected. |
| */ |
| mem_hotplug_begin(); |
| |
| switch (online_type) { |
| case MMOP_ONLINE_KERNEL: |
| case MMOP_ONLINE_MOVABLE: |
| case MMOP_ONLINE_KEEP: |
| mem->online_type = online_type; |
| ret = device_online(&mem->dev); |
| break; |
| case MMOP_OFFLINE: |
| ret = device_offline(&mem->dev); |
| break; |
| default: |
| ret = -EINVAL; /* should never happen */ |
| } |
| |
| mem_hotplug_done(); |
| err: |
| unlock_device_hotplug(); |
| |
| if (ret < 0) |
| return ret; |
| if (ret) |
| return -EINVAL; |
| |
| return count; |
| } |
| |
| /* |
| * phys_device is a bad name for this. What I really want |
| * is a way to differentiate between memory ranges that |
| * are part of physical devices that constitute |
| * a complete removable unit or fru. |
| * i.e. do these ranges belong to the same physical device, |
| * s.t. if I offline all of these sections I can then |
| * remove the physical device? |
| */ |
| static ssize_t show_phys_device(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| return sprintf(buf, "%d\n", mem->phys_device); |
| } |
| |
| #ifdef CONFIG_MEMORY_HOTREMOVE |
| static ssize_t show_valid_zones(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; |
| unsigned long valid_start_pfn, valid_end_pfn; |
| bool append = false; |
| int nid; |
| |
| /* |
| * The block contains more than one zone can not be offlined. |
| * This can happen e.g. for ZONE_DMA and ZONE_DMA32 |
| */ |
| if (!test_pages_in_a_zone(start_pfn, start_pfn + nr_pages, &valid_start_pfn, &valid_end_pfn)) |
| return sprintf(buf, "none\n"); |
| |
| start_pfn = valid_start_pfn; |
| nr_pages = valid_end_pfn - start_pfn; |
| |
| /* |
| * Check the existing zone. Make sure that we do that only on the |
| * online nodes otherwise the page_zone is not reliable |
| */ |
| if (mem->state == MEM_ONLINE) { |
| strcat(buf, page_zone(pfn_to_page(start_pfn))->name); |
| goto out; |
| } |
| |
| nid = pfn_to_nid(start_pfn); |
| if (allow_online_pfn_range(nid, start_pfn, nr_pages, MMOP_ONLINE_KERNEL)) { |
| strcat(buf, default_zone_for_pfn(nid, start_pfn, nr_pages)->name); |
| append = true; |
| } |
| |
| if (allow_online_pfn_range(nid, start_pfn, nr_pages, MMOP_ONLINE_MOVABLE)) { |
| if (append) |
| strcat(buf, " "); |
| strcat(buf, NODE_DATA(nid)->node_zones[ZONE_MOVABLE].name); |
| } |
| out: |
| strcat(buf, "\n"); |
| |
| return strlen(buf); |
| } |
| static DEVICE_ATTR(valid_zones, 0444, show_valid_zones, NULL); |
| #endif |
| |
| static DEVICE_ATTR(phys_index, 0444, show_mem_start_phys_index, NULL); |
| static DEVICE_ATTR(state, 0644, show_mem_state, store_mem_state); |
| static DEVICE_ATTR(phys_device, 0444, show_phys_device, NULL); |
| static DEVICE_ATTR(removable, 0444, show_mem_removable, NULL); |
| |
| /* |
| * Block size attribute stuff |
| */ |
| static ssize_t |
| print_block_size(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%lx\n", get_memory_block_size()); |
| } |
| |
| static DEVICE_ATTR(block_size_bytes, 0444, print_block_size, NULL); |
| |
| /* |
| * Memory auto online policy. |
| */ |
| |
| static ssize_t |
| show_auto_online_blocks(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| if (memhp_auto_online) |
| return sprintf(buf, "online\n"); |
| else |
| return sprintf(buf, "offline\n"); |
| } |
| |
| static ssize_t |
| store_auto_online_blocks(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| if (sysfs_streq(buf, "online")) |
| memhp_auto_online = true; |
| else if (sysfs_streq(buf, "offline")) |
| memhp_auto_online = false; |
| else |
| return -EINVAL; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(auto_online_blocks, 0644, show_auto_online_blocks, |
| store_auto_online_blocks); |
| |
| /* |
| * Some architectures will have custom drivers to do this, and |
| * will not need to do it from userspace. The fake hot-add code |
| * as well as ppc64 will do all of their discovery in userspace |
| * and will require this interface. |
| */ |
| #ifdef CONFIG_ARCH_MEMORY_PROBE |
| static ssize_t |
| memory_probe_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| u64 phys_addr; |
| int nid, ret; |
| unsigned long pages_per_block = PAGES_PER_SECTION * sections_per_block; |
| |
| ret = kstrtoull(buf, 0, &phys_addr); |
| if (ret) |
| return ret; |
| |
| if (phys_addr & ((pages_per_block << PAGE_SHIFT) - 1)) |
| return -EINVAL; |
| |
| nid = memory_add_physaddr_to_nid(phys_addr); |
| ret = add_memory(nid, phys_addr, |
| MIN_MEMORY_BLOCK_SIZE * sections_per_block); |
| |
| if (ret) |
| goto out; |
| |
| ret = count; |
| out: |
| return ret; |
| } |
| |
| static DEVICE_ATTR(probe, S_IWUSR, NULL, memory_probe_store); |
| #endif |
| |
| #ifdef CONFIG_MEMORY_FAILURE |
| /* |
| * Support for offlining pages of memory |
| */ |
| |
| /* Soft offline a page */ |
| static ssize_t |
| store_soft_offline_page(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| u64 pfn; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (kstrtoull(buf, 0, &pfn) < 0) |
| return -EINVAL; |
| pfn >>= PAGE_SHIFT; |
| if (!pfn_valid(pfn)) |
| return -ENXIO; |
| ret = soft_offline_page(pfn_to_page(pfn), 0); |
| return ret == 0 ? count : ret; |
| } |
| |
| /* Forcibly offline a page, including killing processes. */ |
| static ssize_t |
| store_hard_offline_page(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| u64 pfn; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (kstrtoull(buf, 0, &pfn) < 0) |
| return -EINVAL; |
| pfn >>= PAGE_SHIFT; |
| ret = memory_failure(pfn, 0, 0); |
| return ret ? ret : count; |
| } |
| |
| static DEVICE_ATTR(soft_offline_page, S_IWUSR, NULL, store_soft_offline_page); |
| static DEVICE_ATTR(hard_offline_page, S_IWUSR, NULL, store_hard_offline_page); |
| #endif |
| |
| /* |
| * Note that phys_device is optional. It is here to allow for |
| * differentiation between which *physical* devices each |
| * section belongs to... |
| */ |
| int __weak arch_get_memory_phys_device(unsigned long start_pfn) |
| { |
| return 0; |
| } |
| |
| /* |
| * A reference for the returned object is held and the reference for the |
| * hinted object is released. |
| */ |
| struct memory_block *find_memory_block_hinted(struct mem_section *section, |
| struct memory_block *hint) |
| { |
| int block_id = base_memory_block_id(__section_nr(section)); |
| struct device *hintdev = hint ? &hint->dev : NULL; |
| struct device *dev; |
| |
| dev = subsys_find_device_by_id(&memory_subsys, block_id, hintdev); |
| if (hint) |
| put_device(&hint->dev); |
| if (!dev) |
| return NULL; |
| return to_memory_block(dev); |
| } |
| |
| /* |
| * For now, we have a linear search to go find the appropriate |
| * memory_block corresponding to a particular phys_index. If |
| * this gets to be a real problem, we can always use a radix |
| * tree or something here. |
| * |
| * This could be made generic for all device subsystems. |
| */ |
| struct memory_block *find_memory_block(struct mem_section *section) |
| { |
| return find_memory_block_hinted(section, NULL); |
| } |
| |
| static struct attribute *memory_memblk_attrs[] = { |
| &dev_attr_phys_index.attr, |
| &dev_attr_state.attr, |
| &dev_attr_phys_device.attr, |
| &dev_attr_removable.attr, |
| #ifdef CONFIG_MEMORY_HOTREMOVE |
| &dev_attr_valid_zones.attr, |
| #endif |
| NULL |
| }; |
| |
| static struct attribute_group memory_memblk_attr_group = { |
| .attrs = memory_memblk_attrs, |
| }; |
| |
| static const struct attribute_group *memory_memblk_attr_groups[] = { |
| &memory_memblk_attr_group, |
| NULL, |
| }; |
| |
| /* |
| * register_memory - Setup a sysfs device for a memory block |
| */ |
| static |
| int register_memory(struct memory_block *memory) |
| { |
| memory->dev.bus = &memory_subsys; |
| memory->dev.id = memory->start_section_nr / sections_per_block; |
| memory->dev.release = memory_block_release; |
| memory->dev.groups = memory_memblk_attr_groups; |
| memory->dev.offline = memory->state == MEM_OFFLINE; |
| |
| return device_register(&memory->dev); |
| } |
| |
| static int init_memory_block(struct memory_block **memory, |
| struct mem_section *section, unsigned long state) |
| { |
| struct memory_block *mem; |
| unsigned long start_pfn; |
| int scn_nr; |
| int ret = 0; |
| |
| mem = kzalloc(sizeof(*mem), GFP_KERNEL); |
| if (!mem) |
| return -ENOMEM; |
| |
| scn_nr = __section_nr(section); |
| mem->start_section_nr = |
| base_memory_block_id(scn_nr) * sections_per_block; |
| mem->end_section_nr = mem->start_section_nr + sections_per_block - 1; |
| mem->state = state; |
| start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| mem->phys_device = arch_get_memory_phys_device(start_pfn); |
| |
| ret = register_memory(mem); |
| |
| *memory = mem; |
| return ret; |
| } |
| |
| static int add_memory_block(int base_section_nr) |
| { |
| struct memory_block *mem; |
| int i, ret, section_count = 0, section_nr; |
| |
| for (i = base_section_nr; |
| (i < base_section_nr + sections_per_block) && i < NR_MEM_SECTIONS; |
| i++) { |
| if (!present_section_nr(i)) |
| continue; |
| if (section_count == 0) |
| section_nr = i; |
| section_count++; |
| } |
| |
| if (section_count == 0) |
| return 0; |
| ret = init_memory_block(&mem, __nr_to_section(section_nr), MEM_ONLINE); |
| if (ret) |
| return ret; |
| mem->section_count = section_count; |
| return 0; |
| } |
| |
| /* |
| * need an interface for the VM to add new memory regions, |
| * but without onlining it. |
| */ |
| int register_new_memory(int nid, struct mem_section *section) |
| { |
| int ret = 0; |
| struct memory_block *mem; |
| |
| mutex_lock(&mem_sysfs_mutex); |
| |
| mem = find_memory_block(section); |
| if (mem) { |
| mem->section_count++; |
| put_device(&mem->dev); |
| } else { |
| ret = init_memory_block(&mem, section, MEM_OFFLINE); |
| if (ret) |
| goto out; |
| mem->section_count++; |
| } |
| |
| if (mem->section_count == sections_per_block) |
| ret = register_mem_sect_under_node(mem, nid); |
| out: |
| mutex_unlock(&mem_sysfs_mutex); |
| return ret; |
| } |
| |
| #ifdef CONFIG_MEMORY_HOTREMOVE |
| static void |
| unregister_memory(struct memory_block *memory) |
| { |
| BUG_ON(memory->dev.bus != &memory_subsys); |
| |
| /* drop the ref. we got in remove_memory_block() */ |
| put_device(&memory->dev); |
| device_unregister(&memory->dev); |
| } |
| |
| static int remove_memory_section(unsigned long node_id, |
| struct mem_section *section, int phys_device) |
| { |
| struct memory_block *mem; |
| |
| mutex_lock(&mem_sysfs_mutex); |
| |
| /* |
| * Some users of the memory hotplug do not want/need memblock to |
| * track all sections. Skip over those. |
| */ |
| mem = find_memory_block(section); |
| if (!mem) |
| goto out_unlock; |
| |
| unregister_mem_sect_under_nodes(mem, __section_nr(section)); |
| |
| mem->section_count--; |
| if (mem->section_count == 0) |
| unregister_memory(mem); |
| else |
| put_device(&mem->dev); |
| |
| out_unlock: |
| mutex_unlock(&mem_sysfs_mutex); |
| return 0; |
| } |
| |
| int unregister_memory_section(struct mem_section *section) |
| { |
| if (!present_section(section)) |
| return -EINVAL; |
| |
| return remove_memory_section(0, section, 0); |
| } |
| #endif /* CONFIG_MEMORY_HOTREMOVE */ |
| |
| /* return true if the memory block is offlined, otherwise, return false */ |
| bool is_memblock_offlined(struct memory_block *mem) |
| { |
| return mem->state == MEM_OFFLINE; |
| } |
| |
| static struct attribute *memory_root_attrs[] = { |
| #ifdef CONFIG_ARCH_MEMORY_PROBE |
| &dev_attr_probe.attr, |
| #endif |
| |
| #ifdef CONFIG_MEMORY_FAILURE |
| &dev_attr_soft_offline_page.attr, |
| &dev_attr_hard_offline_page.attr, |
| #endif |
| |
| &dev_attr_block_size_bytes.attr, |
| &dev_attr_auto_online_blocks.attr, |
| NULL |
| }; |
| |
| static struct attribute_group memory_root_attr_group = { |
| .attrs = memory_root_attrs, |
| }; |
| |
| static const struct attribute_group *memory_root_attr_groups[] = { |
| &memory_root_attr_group, |
| NULL, |
| }; |
| |
| /* |
| * Initialize the sysfs support for memory devices... |
| */ |
| int __init memory_dev_init(void) |
| { |
| unsigned int i; |
| int ret; |
| int err; |
| unsigned long block_sz; |
| |
| ret = subsys_system_register(&memory_subsys, memory_root_attr_groups); |
| if (ret) |
| goto out; |
| |
| block_sz = get_memory_block_size(); |
| sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE; |
| |
| /* |
| * Create entries for memory sections that were found |
| * during boot and have been initialized |
| */ |
| mutex_lock(&mem_sysfs_mutex); |
| for (i = 0; i < NR_MEM_SECTIONS; i += sections_per_block) { |
| /* Don't iterate over sections we know are !present: */ |
| if (i > __highest_present_section_nr) |
| break; |
| |
| err = add_memory_block(i); |
| if (!ret) |
| ret = err; |
| } |
| mutex_unlock(&mem_sysfs_mutex); |
| |
| out: |
| if (ret) |
| printk(KERN_ERR "%s() failed: %d\n", __func__, ret); |
| return ret; |
| } |