| /* |
| * arch/powerpc/sysdev/uic.c |
| * |
| * IBM PowerPC 4xx Universal Interrupt Controller |
| * |
| * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/reboot.h> |
| #include <linux/slab.h> |
| #include <linux/stddef.h> |
| #include <linux/sched.h> |
| #include <linux/signal.h> |
| #include <linux/sysdev.h> |
| #include <linux/device.h> |
| #include <linux/bootmem.h> |
| #include <linux/spinlock.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel_stat.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/dcr.h> |
| |
| #define NR_UIC_INTS 32 |
| |
| #define UIC_SR 0x0 |
| #define UIC_ER 0x2 |
| #define UIC_CR 0x3 |
| #define UIC_PR 0x4 |
| #define UIC_TR 0x5 |
| #define UIC_MSR 0x6 |
| #define UIC_VR 0x7 |
| #define UIC_VCR 0x8 |
| |
| #define uic_irq_to_hw(virq) (irq_map[virq].hwirq) |
| |
| struct uic *primary_uic; |
| |
| struct uic { |
| int index; |
| int dcrbase; |
| |
| spinlock_t lock; |
| |
| /* The remapper for this UIC */ |
| struct irq_host *irqhost; |
| |
| /* For secondary UICs, the cascade interrupt's irqaction */ |
| struct irqaction cascade; |
| }; |
| |
| static void uic_unmask_irq(unsigned int virq) |
| { |
| struct uic *uic = get_irq_chip_data(virq); |
| unsigned int src = uic_irq_to_hw(virq); |
| unsigned long flags; |
| u32 er; |
| |
| spin_lock_irqsave(&uic->lock, flags); |
| er = mfdcr(uic->dcrbase + UIC_ER); |
| er |= 1 << (31 - src); |
| mtdcr(uic->dcrbase + UIC_ER, er); |
| spin_unlock_irqrestore(&uic->lock, flags); |
| } |
| |
| static void uic_mask_irq(unsigned int virq) |
| { |
| struct uic *uic = get_irq_chip_data(virq); |
| unsigned int src = uic_irq_to_hw(virq); |
| unsigned long flags; |
| u32 er; |
| |
| spin_lock_irqsave(&uic->lock, flags); |
| er = mfdcr(uic->dcrbase + UIC_ER); |
| er &= ~(1 << (31 - src)); |
| mtdcr(uic->dcrbase + UIC_ER, er); |
| spin_unlock_irqrestore(&uic->lock, flags); |
| } |
| |
| static void uic_ack_irq(unsigned int virq) |
| { |
| struct uic *uic = get_irq_chip_data(virq); |
| unsigned int src = uic_irq_to_hw(virq); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uic->lock, flags); |
| mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src)); |
| spin_unlock_irqrestore(&uic->lock, flags); |
| } |
| |
| static int uic_set_irq_type(unsigned int virq, unsigned int flow_type) |
| { |
| struct uic *uic = get_irq_chip_data(virq); |
| unsigned int src = uic_irq_to_hw(virq); |
| struct irq_desc *desc = get_irq_desc(virq); |
| unsigned long flags; |
| int trigger, polarity; |
| u32 tr, pr, mask; |
| |
| switch (flow_type & IRQ_TYPE_SENSE_MASK) { |
| case IRQ_TYPE_NONE: |
| uic_mask_irq(virq); |
| return 0; |
| |
| case IRQ_TYPE_EDGE_RISING: |
| trigger = 1; polarity = 1; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| trigger = 1; polarity = 0; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| trigger = 0; polarity = 1; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| trigger = 0; polarity = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| mask = ~(1 << (31 - src)); |
| |
| spin_lock_irqsave(&uic->lock, flags); |
| tr = mfdcr(uic->dcrbase + UIC_TR); |
| pr = mfdcr(uic->dcrbase + UIC_PR); |
| tr = (tr & mask) | (trigger << (31-src)); |
| pr = (pr & mask) | (polarity << (31-src)); |
| |
| mtdcr(uic->dcrbase + UIC_PR, pr); |
| mtdcr(uic->dcrbase + UIC_TR, tr); |
| |
| desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); |
| desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; |
| if (!trigger) |
| desc->status |= IRQ_LEVEL; |
| |
| spin_unlock_irqrestore(&uic->lock, flags); |
| |
| return 0; |
| } |
| |
| static struct irq_chip uic_irq_chip = { |
| .typename = " UIC ", |
| .unmask = uic_unmask_irq, |
| .mask = uic_mask_irq, |
| /* .mask_ack = uic_mask_irq_and_ack, */ |
| .ack = uic_ack_irq, |
| .set_type = uic_set_irq_type, |
| }; |
| |
| /** |
| * handle_uic_irq - irq flow handler for UIC |
| * @irq: the interrupt number |
| * @desc: the interrupt description structure for this irq |
| * |
| * This is modified version of the generic handle_level_irq() suitable |
| * for the UIC. On the UIC, acking (i.e. clearing the SR bit) a level |
| * irq will have no effect if the interrupt is still asserted by the |
| * device, even if the interrupt is already masked. Therefore, unlike |
| * the standard handle_level_irq(), we must ack the interrupt *after* |
| * invoking the ISR (which should have de-asserted the interrupt in |
| * the external source). For edge interrupts we ack at the beginning |
| * instead of the end, to keep the window in which we can miss an |
| * interrupt as small as possible. |
| */ |
| void fastcall handle_uic_irq(unsigned int irq, struct irq_desc *desc) |
| { |
| unsigned int cpu = smp_processor_id(); |
| struct irqaction *action; |
| irqreturn_t action_ret; |
| |
| spin_lock(&desc->lock); |
| if (desc->status & IRQ_LEVEL) |
| desc->chip->mask(irq); |
| else |
| desc->chip->mask_ack(irq); |
| |
| if (unlikely(desc->status & IRQ_INPROGRESS)) |
| goto out_unlock; |
| desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); |
| kstat_cpu(cpu).irqs[irq]++; |
| |
| /* |
| * If its disabled or no action available |
| * keep it masked and get out of here |
| */ |
| action = desc->action; |
| if (unlikely(!action || (desc->status & IRQ_DISABLED))) { |
| desc->status |= IRQ_PENDING; |
| goto out_unlock; |
| } |
| |
| desc->status |= IRQ_INPROGRESS; |
| desc->status &= ~IRQ_PENDING; |
| spin_unlock(&desc->lock); |
| |
| action_ret = handle_IRQ_event(irq, action); |
| |
| spin_lock(&desc->lock); |
| desc->status &= ~IRQ_INPROGRESS; |
| if (desc->status & IRQ_LEVEL) |
| desc->chip->ack(irq); |
| if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) |
| desc->chip->unmask(irq); |
| out_unlock: |
| spin_unlock(&desc->lock); |
| } |
| |
| static int uic_host_match(struct irq_host *h, struct device_node *node) |
| { |
| return h->of_node == node; |
| } |
| |
| static int uic_host_map(struct irq_host *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| struct uic *uic = h->host_data; |
| |
| set_irq_chip_data(virq, uic); |
| /* Despite the name, handle_level_irq() works for both level |
| * and edge irqs on UIC. FIXME: check this is correct */ |
| set_irq_chip_and_handler(virq, &uic_irq_chip, handle_uic_irq); |
| |
| /* Set default irq type */ |
| set_irq_type(virq, IRQ_TYPE_NONE); |
| |
| return 0; |
| } |
| |
| static int uic_host_xlate(struct irq_host *h, struct device_node *ct, |
| u32 *intspec, unsigned int intsize, |
| irq_hw_number_t *out_hwirq, unsigned int *out_type) |
| |
| { |
| /* UIC intspecs must have 2 cells */ |
| BUG_ON(intsize != 2); |
| *out_hwirq = intspec[0]; |
| *out_type = intspec[1]; |
| return 0; |
| } |
| |
| static struct irq_host_ops uic_host_ops = { |
| .match = uic_host_match, |
| .map = uic_host_map, |
| .xlate = uic_host_xlate, |
| }; |
| |
| irqreturn_t uic_cascade(int virq, void *data) |
| { |
| struct uic *uic = data; |
| u32 msr; |
| int src; |
| int subvirq; |
| |
| msr = mfdcr(uic->dcrbase + UIC_MSR); |
| if (!msr) /* spurious interrupt */ |
| return IRQ_HANDLED; |
| |
| src = 32 - ffs(msr); |
| |
| subvirq = irq_linear_revmap(uic->irqhost, src); |
| generic_handle_irq(subvirq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct uic * __init uic_init_one(struct device_node *node) |
| { |
| struct uic *uic; |
| const u32 *indexp, *dcrreg; |
| int len; |
| |
| BUG_ON(! of_device_is_compatible(node, "ibm,uic")); |
| |
| uic = alloc_bootmem(sizeof(*uic)); |
| if (! uic) |
| return NULL; /* FIXME: panic? */ |
| |
| memset(uic, 0, sizeof(*uic)); |
| spin_lock_init(&uic->lock); |
| indexp = of_get_property(node, "cell-index", &len); |
| if (!indexp || (len != sizeof(u32))) { |
| printk(KERN_ERR "uic: Device node %s has missing or invalid " |
| "cell-index property\n", node->full_name); |
| return NULL; |
| } |
| uic->index = *indexp; |
| |
| dcrreg = of_get_property(node, "dcr-reg", &len); |
| if (!dcrreg || (len != 2*sizeof(u32))) { |
| printk(KERN_ERR "uic: Device node %s has missing or invalid " |
| "dcr-reg property\n", node->full_name); |
| return NULL; |
| } |
| uic->dcrbase = *dcrreg; |
| |
| uic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR, |
| NR_UIC_INTS, &uic_host_ops, -1); |
| if (! uic->irqhost) { |
| of_node_put(node); |
| return NULL; /* FIXME: panic? */ |
| } |
| |
| uic->irqhost->host_data = uic; |
| |
| /* Start with all interrupts disabled, level and non-critical */ |
| mtdcr(uic->dcrbase + UIC_ER, 0); |
| mtdcr(uic->dcrbase + UIC_CR, 0); |
| mtdcr(uic->dcrbase + UIC_TR, 0); |
| /* Clear any pending interrupts, in case the firmware left some */ |
| mtdcr(uic->dcrbase + UIC_SR, 0xffffffff); |
| |
| printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index, |
| NR_UIC_INTS, uic->dcrbase); |
| |
| return uic; |
| } |
| |
| void __init uic_init_tree(void) |
| { |
| struct device_node *np; |
| struct uic *uic; |
| const u32 *interrupts; |
| |
| /* First locate and initialize the top-level UIC */ |
| |
| np = of_find_compatible_node(NULL, NULL, "ibm,uic"); |
| while (np) { |
| interrupts = of_get_property(np, "interrupts", NULL); |
| if (! interrupts) |
| break; |
| |
| np = of_find_compatible_node(np, NULL, "ibm,uic"); |
| } |
| |
| BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the |
| * top-level interrupt controller */ |
| primary_uic = uic_init_one(np); |
| if (! primary_uic) |
| panic("Unable to initialize primary UIC %s\n", np->full_name); |
| |
| irq_set_default_host(primary_uic->irqhost); |
| of_node_put(np); |
| |
| /* The scan again for cascaded UICs */ |
| np = of_find_compatible_node(NULL, NULL, "ibm,uic"); |
| while (np) { |
| interrupts = of_get_property(np, "interrupts", NULL); |
| if (interrupts) { |
| /* Secondary UIC */ |
| int cascade_virq; |
| int ret; |
| |
| uic = uic_init_one(np); |
| if (! uic) |
| panic("Unable to initialize a secondary UIC %s\n", |
| np->full_name); |
| |
| cascade_virq = irq_of_parse_and_map(np, 0); |
| |
| uic->cascade.handler = uic_cascade; |
| uic->cascade.name = "UIC cascade"; |
| uic->cascade.dev_id = uic; |
| |
| ret = setup_irq(cascade_virq, &uic->cascade); |
| if (ret) |
| printk(KERN_ERR "Failed to setup_irq(%d) for " |
| "UIC%d cascade\n", cascade_virq, |
| uic->index); |
| |
| /* FIXME: setup critical cascade?? */ |
| } |
| |
| np = of_find_compatible_node(np, NULL, "ibm,uic"); |
| } |
| } |
| |
| /* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ |
| unsigned int uic_get_irq(void) |
| { |
| u32 msr; |
| int src; |
| |
| BUG_ON(! primary_uic); |
| |
| msr = mfdcr(primary_uic->dcrbase + UIC_MSR); |
| src = 32 - ffs(msr); |
| |
| return irq_linear_revmap(primary_uic->irqhost, src); |
| } |