| /* |
| * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> |
| * PWM beeper driver |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include <linux/input.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| |
| struct pwm_beeper { |
| struct input_dev *input; |
| struct pwm_device *pwm; |
| unsigned long period; |
| }; |
| |
| #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x)) |
| |
| static int pwm_beeper_event(struct input_dev *input, |
| unsigned int type, unsigned int code, int value) |
| { |
| int ret = 0; |
| struct pwm_beeper *beeper = input_get_drvdata(input); |
| unsigned long period; |
| |
| if (type != EV_SND || value < 0) |
| return -EINVAL; |
| |
| switch (code) { |
| case SND_BELL: |
| value = value ? 1000 : 0; |
| break; |
| case SND_TONE: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (value == 0) { |
| pwm_config(beeper->pwm, 0, 0); |
| pwm_disable(beeper->pwm); |
| } else { |
| period = HZ_TO_NANOSECONDS(value); |
| ret = pwm_config(beeper->pwm, period / 2, period); |
| if (ret) |
| return ret; |
| ret = pwm_enable(beeper->pwm); |
| if (ret) |
| return ret; |
| beeper->period = period; |
| } |
| |
| return 0; |
| } |
| |
| static int pwm_beeper_probe(struct platform_device *pdev) |
| { |
| unsigned long pwm_id = (unsigned long)pdev->dev.platform_data; |
| struct pwm_beeper *beeper; |
| int error; |
| |
| beeper = kzalloc(sizeof(*beeper), GFP_KERNEL); |
| if (!beeper) |
| return -ENOMEM; |
| |
| beeper->pwm = pwm_get(&pdev->dev, NULL); |
| if (IS_ERR(beeper->pwm)) { |
| dev_dbg(&pdev->dev, "unable to request PWM, trying legacy API\n"); |
| beeper->pwm = pwm_request(pwm_id, "pwm beeper"); |
| } |
| |
| if (IS_ERR(beeper->pwm)) { |
| error = PTR_ERR(beeper->pwm); |
| dev_err(&pdev->dev, "Failed to request pwm device: %d\n", error); |
| goto err_free; |
| } |
| |
| beeper->input = input_allocate_device(); |
| if (!beeper->input) { |
| dev_err(&pdev->dev, "Failed to allocate input device\n"); |
| error = -ENOMEM; |
| goto err_pwm_free; |
| } |
| beeper->input->dev.parent = &pdev->dev; |
| |
| beeper->input->name = "pwm-beeper"; |
| beeper->input->phys = "pwm/input0"; |
| beeper->input->id.bustype = BUS_HOST; |
| beeper->input->id.vendor = 0x001f; |
| beeper->input->id.product = 0x0001; |
| beeper->input->id.version = 0x0100; |
| |
| beeper->input->evbit[0] = BIT(EV_SND); |
| beeper->input->sndbit[0] = BIT(SND_TONE) | BIT(SND_BELL); |
| |
| beeper->input->event = pwm_beeper_event; |
| |
| input_set_drvdata(beeper->input, beeper); |
| |
| error = input_register_device(beeper->input); |
| if (error) { |
| dev_err(&pdev->dev, "Failed to register input device: %d\n", error); |
| goto err_input_free; |
| } |
| |
| platform_set_drvdata(pdev, beeper); |
| |
| return 0; |
| |
| err_input_free: |
| input_free_device(beeper->input); |
| err_pwm_free: |
| pwm_free(beeper->pwm); |
| err_free: |
| kfree(beeper); |
| |
| return error; |
| } |
| |
| static int __devexit pwm_beeper_remove(struct platform_device *pdev) |
| { |
| struct pwm_beeper *beeper = platform_get_drvdata(pdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| input_unregister_device(beeper->input); |
| |
| pwm_disable(beeper->pwm); |
| pwm_free(beeper->pwm); |
| |
| kfree(beeper); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int pwm_beeper_suspend(struct device *dev) |
| { |
| struct pwm_beeper *beeper = dev_get_drvdata(dev); |
| |
| if (beeper->period) |
| pwm_disable(beeper->pwm); |
| |
| return 0; |
| } |
| |
| static int pwm_beeper_resume(struct device *dev) |
| { |
| struct pwm_beeper *beeper = dev_get_drvdata(dev); |
| |
| if (beeper->period) { |
| pwm_config(beeper->pwm, beeper->period / 2, beeper->period); |
| pwm_enable(beeper->pwm); |
| } |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops, |
| pwm_beeper_suspend, pwm_beeper_resume); |
| |
| #define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops) |
| #else |
| #define PWM_BEEPER_PM_OPS NULL |
| #endif |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id pwm_beeper_match[] = { |
| { .compatible = "pwm-beeper", }, |
| { }, |
| }; |
| #endif |
| |
| static struct platform_driver pwm_beeper_driver = { |
| .probe = pwm_beeper_probe, |
| .remove = pwm_beeper_remove, |
| .driver = { |
| .name = "pwm-beeper", |
| .owner = THIS_MODULE, |
| .pm = PWM_BEEPER_PM_OPS, |
| .of_match_table = of_match_ptr(pwm_beeper_match), |
| }, |
| }; |
| module_platform_driver(pwm_beeper_driver); |
| |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_DESCRIPTION("PWM beeper driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pwm-beeper"); |