[media] rc: Rename remote controller type to rc_type instead of ir_type
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index e71a026..c330fb9 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -98,7 +98,7 @@
case CX18_HW_Z8F0811_IR_RX_HAUP:
init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
- init_data->type = IR_TYPE_RC5;
+ init_data->type = RC_TYPE_RC5;
init_data->name = cx->card_name;
info.platform_data = init_data;
break;
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
index 1d043ed..c236a4e 100644
--- a/drivers/media/video/cx231xx/cx231xx-input.c
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -84,7 +84,7 @@
/* The i2c micro-controller only outputs the cmd part of NEC protocol */
dev->init_data.rc_dev->scanmask = 0xff;
dev->init_data.rc_dev->driver_name = "cx231xx";
- dev->init_data.type = IR_TYPE_NEC;
+ dev->init_data.type = RC_TYPE_NEC;
info.addr = 0x30;
/* Load and bind ir-kbd-i2c */
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index e824ba6..0b0d066 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -264,14 +264,14 @@
case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Integrated CX2388[58] IR controller */
driver_type = RC_DRIVER_IR_RAW;
- allowed_protos = IR_TYPE_ALL;
+ allowed_protos = RC_TYPE_ALL;
/* The grey Hauppauge RC-5 remote */
rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
break;
case CX23885_BOARD_TEVII_S470:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
- allowed_protos = IR_TYPE_ALL;
+ allowed_protos = RC_TYPE_ALL;
/* A guess at the remote */
rc_map = RC_MAP_TEVII_NEC;
break;
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index cfeba4c..4a3bf54 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -241,7 +241,7 @@
struct cx88_IR *ir;
struct rc_dev *dev;
char *ir_codes = NULL;
- u64 ir_type = IR_TYPE_OTHER;
+ u64 rc_type = RC_TYPE_OTHER;
int err = -ENOMEM;
u32 hardware_mask = 0; /* For devices with a hardware mask, when
* used with a full-code IR table
@@ -404,7 +404,7 @@
break;
case CX88_BOARD_TWINHAN_VP1027_DVBS:
ir_codes = RC_MAP_TWINHAN_VP1027_DVBS;
- ir_type = IR_TYPE_NEC;
+ rc_type = RC_TYPE_NEC;
ir->sampling = 0xff00; /* address */
break;
}
@@ -457,7 +457,7 @@
dev->timeout = 10 * 1000 * 1000; /* 10 ms */
} else {
dev->driver_type = RC_DRIVER_SCANCODE;
- dev->allowed_protos = ir_type;
+ dev->allowed_protos = rc_type;
}
ir->core = core;
@@ -557,7 +557,7 @@
/* Hauppauge XVR */
core->init_data.name = "cx88 Hauppauge XVR remote";
core->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW;
- core->init_data.type = IR_TYPE_RC5;
+ core->init_data.type = RC_TYPE_RC5;
core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
info.platform_data = &core->init_data;
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index e32eb38..29cc744 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -343,7 +343,7 @@
cancel_delayed_work_sync(&ir->work);
}
-int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 ir_type)
+int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
{
int rc = 0;
struct em28xx_IR *ir = rc_dev->priv;
@@ -352,14 +352,14 @@
/* Adjust xclk based o IR table for RC5/NEC tables */
- if (ir_type == IR_TYPE_RC5) {
+ if (rc_type == RC_TYPE_RC5) {
dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
ir->full_code = 1;
- } else if (ir_type == IR_TYPE_NEC) {
+ } else if (rc_type == RC_TYPE_NEC) {
dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
ir_config = EM2874_IR_NEC;
ir->full_code = 1;
- } else if (ir_type != IR_TYPE_UNKNOWN)
+ } else if (rc_type != RC_TYPE_UNKNOWN)
rc = -EINVAL;
em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
@@ -408,14 +408,14 @@
* em2874 supports more protocols. For now, let's just announce
* the two protocols that were already tested
*/
- rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+ rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
rc->priv = ir;
rc->change_protocol = em28xx_ir_change_protocol;
rc->open = em28xx_ir_start;
rc->close = em28xx_ir_stop;
/* By default, keep protocol field untouched */
- err = em28xx_ir_change_protocol(rc, IR_TYPE_UNKNOWN);
+ err = em28xx_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
if (err)
goto err_out_free;
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index c77ea53..dd54c3d 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -269,7 +269,7 @@
{
char *ir_codes = NULL;
const char *name = NULL;
- u64 ir_type = IR_TYPE_UNKNOWN;
+ u64 rc_type = RC_TYPE_UNKNOWN;
struct IR_i2c *ir;
struct rc_dev *rc = NULL;
struct i2c_adapter *adap = client->adapter;
@@ -288,7 +288,7 @@
case 0x64:
name = "Pixelview";
ir->get_key = get_key_pixelview;
- ir_type = IR_TYPE_OTHER;
+ rc_type = RC_TYPE_OTHER;
ir_codes = RC_MAP_EMPTY;
break;
case 0x18:
@@ -296,7 +296,7 @@
case 0x1a:
name = "Hauppauge";
ir->get_key = get_key_haup;
- ir_type = IR_TYPE_RC5;
+ rc_type = RC_TYPE_RC5;
if (hauppauge == 1) {
ir_codes = RC_MAP_HAUPPAUGE_NEW;
} else {
@@ -306,19 +306,19 @@
case 0x30:
name = "KNC One";
ir->get_key = get_key_knc1;
- ir_type = IR_TYPE_OTHER;
+ rc_type = RC_TYPE_OTHER;
ir_codes = RC_MAP_EMPTY;
break;
case 0x6b:
name = "FusionHDTV";
ir->get_key = get_key_fusionhdtv;
- ir_type = IR_TYPE_RC5;
+ rc_type = RC_TYPE_RC5;
ir_codes = RC_MAP_FUSIONHDTV_MCE;
break;
case 0x40:
name = "AVerMedia Cardbus remote";
ir->get_key = get_key_avermedia_cardbus;
- ir_type = IR_TYPE_OTHER;
+ rc_type = RC_TYPE_OTHER;
ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
break;
}
@@ -333,7 +333,7 @@
name = init_data->name;
if (init_data->type)
- ir_type = init_data->type;
+ rc_type = init_data->type;
if (init_data->polling_interval)
ir->polling_interval = init_data->polling_interval;
@@ -378,7 +378,7 @@
ir->rc = rc;
/* Make sure we are all setup before going on */
- if (!name || !ir->get_key || !ir_type || !ir_codes) {
+ if (!name || !ir->get_key || !rc_type || !ir_codes) {
dprintk(1, ": Unsupported device at address 0x%02x\n",
addr);
err = -ENODEV;
@@ -405,7 +405,7 @@
* Initialize the other fields of rc_dev
*/
rc->map_name = ir->ir_codes;
- rc->allowed_protos = ir_type;
+ rc->allowed_protos = rc_type;
if (!rc->driver_name)
rc->driver_name = MODULE_NAME;
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 665191c..6817092 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -172,7 +172,7 @@
init_data->ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
init_data->internal_get_key_func =
IR_KBD_GET_KEY_AVERMEDIA_CARDBUS;
- init_data->type = IR_TYPE_OTHER;
+ init_data->type = RC_TYPE_OTHER;
init_data->name = "AVerMedia AVerTV card";
break;
case IVTV_HW_I2C_IR_RX_HAUP_EXT:
@@ -180,14 +180,14 @@
/* Default to old black remote */
init_data->ir_codes = RC_MAP_RC5_TV;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
- init_data->type = IR_TYPE_RC5;
+ init_data->type = RC_TYPE_RC5;
init_data->name = itv->card_name;
break;
case IVTV_HW_Z8F0811_IR_RX_HAUP:
/* Default to grey remote */
init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
- init_data->type = IR_TYPE_RC5;
+ init_data->type = RC_TYPE_RC5;
init_data->name = itv->card_name;
break;
}
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index cd39aea..f3f4aff 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -909,7 +909,7 @@
dev->init_data.name = "BeholdTV";
dev->init_data.get_key = get_key_beholdm6xx;
dev->init_data.ir_codes = RC_MAP_BEHOLD;
- dev->init_data.type = IR_TYPE_NEC;
+ dev->init_data.type = RC_TYPE_NEC;
info.addr = 0x2d;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_501: