| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /dts-v1/; |
| /include/ "imx53.dtsi" |
| |
| / { |
| model = "Freescale i.MX53 Smart Mobile Reference Design Board"; |
| compatible = "fsl,imx53-smd", "fsl,imx53"; |
| |
| memory { |
| reg = <0x70000000 0x40000000>; |
| }; |
| |
| soc { |
| aips@50000000 { /* AIPS1 */ |
| spba@50000000 { |
| esdhc@50004000 { /* ESDHC1 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc1_1>; |
| cd-gpios = <&gpio3 13 0>; |
| wp-gpios = <&gpio4 11 0>; |
| status = "okay"; |
| }; |
| |
| esdhc@50008000 { /* ESDHC2 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc2_1>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| uart3: serial@5000c000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3_1>; |
| fsl,uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| ecspi@50010000 { /* ECSPI1 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1_1>; |
| fsl,spi-num-chipselects = <2>; |
| cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; |
| status = "okay"; |
| |
| zigbee: mc1323@0 { |
| compatible = "fsl,mc1323"; |
| spi-max-frequency = <8000000>; |
| reg = <0>; |
| }; |
| |
| flash: m25p32@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,m25p32", "st,m25p"; |
| spi-max-frequency = <20000000>; |
| reg = <1>; |
| |
| partition@0 { |
| label = "U-Boot"; |
| reg = <0x0 0x40000>; |
| read-only; |
| }; |
| |
| partition@40000 { |
| label = "Kernel"; |
| reg = <0x40000 0x3c0000>; |
| }; |
| }; |
| }; |
| |
| esdhc@50020000 { /* ESDHC3 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc3_1>; |
| non-removable; |
| status = "okay"; |
| }; |
| }; |
| |
| iomuxc@53fa8000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| hog { |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ |
| 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ |
| 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ |
| 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ |
| 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ |
| 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ |
| 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ |
| >; |
| }; |
| }; |
| }; |
| |
| uart1: serial@53fbc000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1_1>; |
| status = "okay"; |
| }; |
| |
| uart2: serial@53fc0000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2_1>; |
| status = "okay"; |
| }; |
| }; |
| |
| aips@60000000 { /* AIPS2 */ |
| i2c@63fc4000 { /* I2C2 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2_1>; |
| status = "okay"; |
| |
| codec: sgtl5000@0a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| }; |
| |
| magnetometer: mag3110@0e { |
| compatible = "fsl,mag3110"; |
| reg = <0x0e>; |
| }; |
| |
| touchkey: mpr121@5a { |
| compatible = "fsl,mpr121"; |
| reg = <0x5a>; |
| }; |
| }; |
| |
| i2c@63fc8000 { /* I2C1 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1_1>; |
| status = "okay"; |
| |
| accelerometer: mma8450@1c { |
| compatible = "fsl,mma8450"; |
| reg = <0x1c>; |
| }; |
| |
| camera: ov5642@3c { |
| compatible = "ovti,ov5642"; |
| reg = <0x3c>; |
| }; |
| |
| pmic: dialog@48 { |
| compatible = "dialog,da9053", "dialog,da9052"; |
| reg = <0x48>; |
| }; |
| }; |
| |
| ethernet@63fec000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec_1>; |
| phy-mode = "rmii"; |
| phy-reset-gpios = <&gpio7 6 0>; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| volume-up { |
| label = "Volume Up"; |
| gpios = <&gpio2 14 0>; |
| linux,code = <115>; /* KEY_VOLUMEUP */ |
| }; |
| |
| volume-down { |
| label = "Volume Down"; |
| gpios = <&gpio2 15 0>; |
| linux,code = <114>; /* KEY_VOLUMEDOWN */ |
| }; |
| }; |
| }; |