mmc: core: Disable HPI for certain Hynix eMMC cards
Certain Hynix eMMC 4.41 cards might get broken when HPI feature is used
and hence this patch disables the HPI feature for such buggy cards.
As some of the other features like BKOPs/Cache/Sanitize are dependent on
HPI feature, those features would also get disabled if HPI is disabled.
Signed-off-by: Pratibhasagar V <pratibha@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
[gdavis: Forward port and cleanup]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index ccab9bb..5485040 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -45,6 +45,17 @@
35, 40, 45, 50, 55, 60, 70, 80,
};
+static const struct mmc_fixup mmc_ext_csd_fixups[] = {
+ /*
+ * Certain Hynix eMMC 4.41 cards might get broken when HPI feature
+ * is used so disable the HPI feature for such buggy cards.
+ */
+ MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_HYNIX,
+ 0x014a, add_quirk, MMC_QUIRK_BROKEN_HPI, 5),
+
+ END_FIXUP
+};
+
#define UNSTUFF_BITS(resp,start,size) \
({ \
const int __size = size; \
@@ -375,6 +386,9 @@
*/
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
+ /* fixup device after ext_csd revision field is updated */
+ mmc_fixup_device(card, mmc_ext_csd_fixups);
+
card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0];
card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1];
card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2];
@@ -506,7 +520,8 @@
card->cid.year += 16;
/* check whether the eMMC card supports BKOPS */
- if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
+ if (!mmc_card_broken_hpi(card) &&
+ ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
card->ext_csd.bkops = 1;
card->ext_csd.man_bkops_en =
(ext_csd[EXT_CSD_BKOPS_EN] &
@@ -519,7 +534,8 @@
}
/* check whether the eMMC card supports HPI */
- if (!broken_hpi && (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1)) {
+ if (!mmc_card_broken_hpi(card) &&
+ !broken_hpi && (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1)) {
card->ext_csd.hpi = 1;
if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2)
card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION;
@@ -1675,7 +1691,8 @@
* If cache size is higher than 0, this indicates
* the existence of cache and it can be turned on.
*/
- if (card->ext_csd.cache_size > 0) {
+ if (!mmc_card_broken_hpi(card) &&
+ card->ext_csd.cache_size > 0) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_CACHE_CTRL, 1,
card->ext_csd.generic_cmd6_time);