| /******************************************************************************* |
| * |
| * Intel Ethernet Controller XL710 Family Linux Driver |
| * Copyright(c) 2013 - 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Contact Information: |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| ******************************************************************************/ |
| |
| #include "i40e_prototype.h" |
| |
| /** |
| * i40e_init_nvm_ops - Initialize NVM function pointers |
| * @hw: pointer to the HW structure |
| * |
| * Setup the function pointers and the NVM info structure. Should be called |
| * once per NVM initialization, e.g. inside the i40e_init_shared_code(). |
| * Please notice that the NVM term is used here (& in all methods covered |
| * in this file) as an equivalent of the FLASH part mapped into the SR. |
| * We are accessing FLASH always thru the Shadow RAM. |
| **/ |
| i40e_status i40e_init_nvm(struct i40e_hw *hw) |
| { |
| struct i40e_nvm_info *nvm = &hw->nvm; |
| i40e_status ret_code = 0; |
| u32 fla, gens; |
| u8 sr_size; |
| |
| /* The SR size is stored regardless of the nvm programming mode |
| * as the blank mode may be used in the factory line. |
| */ |
| gens = rd32(hw, I40E_GLNVM_GENS); |
| sr_size = ((gens & I40E_GLNVM_GENS_SR_SIZE_MASK) >> |
| I40E_GLNVM_GENS_SR_SIZE_SHIFT); |
| /* Switching to words (sr_size contains power of 2KB) */ |
| nvm->sr_size = BIT(sr_size) * I40E_SR_WORDS_IN_1KB; |
| |
| /* Check if we are in the normal or blank NVM programming mode */ |
| fla = rd32(hw, I40E_GLNVM_FLA); |
| if (fla & I40E_GLNVM_FLA_LOCKED_MASK) { /* Normal programming mode */ |
| /* Max NVM timeout */ |
| nvm->timeout = I40E_MAX_NVM_TIMEOUT; |
| nvm->blank_nvm_mode = false; |
| } else { /* Blank programming mode */ |
| nvm->blank_nvm_mode = true; |
| ret_code = I40E_ERR_NVM_BLANK_MODE; |
| i40e_debug(hw, I40E_DEBUG_NVM, "NVM init error: unsupported blank mode.\n"); |
| } |
| |
| return ret_code; |
| } |
| |
| /** |
| * i40e_acquire_nvm - Generic request for acquiring the NVM ownership |
| * @hw: pointer to the HW structure |
| * @access: NVM access type (read or write) |
| * |
| * This function will request NVM ownership for reading |
| * via the proper Admin Command. |
| **/ |
| i40e_status i40e_acquire_nvm(struct i40e_hw *hw, |
| enum i40e_aq_resource_access_type access) |
| { |
| i40e_status ret_code = 0; |
| u64 gtime, timeout; |
| u64 time_left = 0; |
| |
| if (hw->nvm.blank_nvm_mode) |
| goto i40e_i40e_acquire_nvm_exit; |
| |
| ret_code = i40e_aq_request_resource(hw, I40E_NVM_RESOURCE_ID, access, |
| 0, &time_left, NULL); |
| /* Reading the Global Device Timer */ |
| gtime = rd32(hw, I40E_GLVFGEN_TIMER); |
| |
| /* Store the timeout */ |
| hw->nvm.hw_semaphore_timeout = I40E_MS_TO_GTIME(time_left) + gtime; |
| |
| if (ret_code) |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM acquire type %d failed time_left=%llu ret=%d aq_err=%d\n", |
| access, time_left, ret_code, hw->aq.asq_last_status); |
| |
| if (ret_code && time_left) { |
| /* Poll until the current NVM owner timeouts */ |
| timeout = I40E_MS_TO_GTIME(I40E_MAX_NVM_TIMEOUT) + gtime; |
| while ((gtime < timeout) && time_left) { |
| usleep_range(10000, 20000); |
| gtime = rd32(hw, I40E_GLVFGEN_TIMER); |
| ret_code = i40e_aq_request_resource(hw, |
| I40E_NVM_RESOURCE_ID, |
| access, 0, &time_left, |
| NULL); |
| if (!ret_code) { |
| hw->nvm.hw_semaphore_timeout = |
| I40E_MS_TO_GTIME(time_left) + gtime; |
| break; |
| } |
| } |
| if (ret_code) { |
| hw->nvm.hw_semaphore_timeout = 0; |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM acquire timed out, wait %llu ms before trying again. status=%d aq_err=%d\n", |
| time_left, ret_code, hw->aq.asq_last_status); |
| } |
| } |
| |
| i40e_i40e_acquire_nvm_exit: |
| return ret_code; |
| } |
| |
| /** |
| * i40e_release_nvm - Generic request for releasing the NVM ownership |
| * @hw: pointer to the HW structure |
| * |
| * This function will release NVM resource via the proper Admin Command. |
| **/ |
| void i40e_release_nvm(struct i40e_hw *hw) |
| { |
| if (!hw->nvm.blank_nvm_mode) |
| i40e_aq_release_resource(hw, I40E_NVM_RESOURCE_ID, 0, NULL); |
| } |
| |
| /** |
| * i40e_poll_sr_srctl_done_bit - Polls the GLNVM_SRCTL done bit |
| * @hw: pointer to the HW structure |
| * |
| * Polls the SRCTL Shadow RAM register done bit. |
| **/ |
| static i40e_status i40e_poll_sr_srctl_done_bit(struct i40e_hw *hw) |
| { |
| i40e_status ret_code = I40E_ERR_TIMEOUT; |
| u32 srctl, wait_cnt; |
| |
| /* Poll the I40E_GLNVM_SRCTL until the done bit is set */ |
| for (wait_cnt = 0; wait_cnt < I40E_SRRD_SRCTL_ATTEMPTS; wait_cnt++) { |
| srctl = rd32(hw, I40E_GLNVM_SRCTL); |
| if (srctl & I40E_GLNVM_SRCTL_DONE_MASK) { |
| ret_code = 0; |
| break; |
| } |
| udelay(5); |
| } |
| if (ret_code == I40E_ERR_TIMEOUT) |
| i40e_debug(hw, I40E_DEBUG_NVM, "Done bit in GLNVM_SRCTL not set"); |
| return ret_code; |
| } |
| |
| /** |
| * i40e_read_nvm_word_srctl - Reads Shadow RAM via SRCTL register |
| * @hw: pointer to the HW structure |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF) |
| * @data: word read from the Shadow RAM |
| * |
| * Reads one 16 bit word from the Shadow RAM using the GLNVM_SRCTL register. |
| **/ |
| static i40e_status i40e_read_nvm_word_srctl(struct i40e_hw *hw, u16 offset, |
| u16 *data) |
| { |
| i40e_status ret_code = I40E_ERR_TIMEOUT; |
| u32 sr_reg; |
| |
| if (offset >= hw->nvm.sr_size) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM read error: offset %d beyond Shadow RAM limit %d\n", |
| offset, hw->nvm.sr_size); |
| ret_code = I40E_ERR_PARAM; |
| goto read_nvm_exit; |
| } |
| |
| /* Poll the done bit first */ |
| ret_code = i40e_poll_sr_srctl_done_bit(hw); |
| if (!ret_code) { |
| /* Write the address and start reading */ |
| sr_reg = ((u32)offset << I40E_GLNVM_SRCTL_ADDR_SHIFT) | |
| BIT(I40E_GLNVM_SRCTL_START_SHIFT); |
| wr32(hw, I40E_GLNVM_SRCTL, sr_reg); |
| |
| /* Poll I40E_GLNVM_SRCTL until the done bit is set */ |
| ret_code = i40e_poll_sr_srctl_done_bit(hw); |
| if (!ret_code) { |
| sr_reg = rd32(hw, I40E_GLNVM_SRDATA); |
| *data = (u16)((sr_reg & |
| I40E_GLNVM_SRDATA_RDDATA_MASK) |
| >> I40E_GLNVM_SRDATA_RDDATA_SHIFT); |
| } |
| } |
| if (ret_code) |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM read error: Couldn't access Shadow RAM address: 0x%x\n", |
| offset); |
| |
| read_nvm_exit: |
| return ret_code; |
| } |
| |
| /** |
| * i40e_read_nvm_aq - Read Shadow RAM. |
| * @hw: pointer to the HW structure. |
| * @module_pointer: module pointer location in words from the NVM beginning |
| * @offset: offset in words from module start |
| * @words: number of words to write |
| * @data: buffer with words to write to the Shadow RAM |
| * @last_command: tells the AdminQ that this is the last command |
| * |
| * Writes a 16 bit words buffer to the Shadow RAM using the admin command. |
| **/ |
| static i40e_status i40e_read_nvm_aq(struct i40e_hw *hw, u8 module_pointer, |
| u32 offset, u16 words, void *data, |
| bool last_command) |
| { |
| i40e_status ret_code = I40E_ERR_NVM; |
| struct i40e_asq_cmd_details cmd_details; |
| |
| memset(&cmd_details, 0, sizeof(cmd_details)); |
| |
| /* Here we are checking the SR limit only for the flat memory model. |
| * We cannot do it for the module-based model, as we did not acquire |
| * the NVM resource yet (we cannot get the module pointer value). |
| * Firmware will check the module-based model. |
| */ |
| if ((offset + words) > hw->nvm.sr_size) |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM write error: offset %d beyond Shadow RAM limit %d\n", |
| (offset + words), hw->nvm.sr_size); |
| else if (words > I40E_SR_SECTOR_SIZE_IN_WORDS) |
| /* We can write only up to 4KB (one sector), in one AQ write */ |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM write fail error: tried to write %d words, limit is %d.\n", |
| words, I40E_SR_SECTOR_SIZE_IN_WORDS); |
| else if (((offset + (words - 1)) / I40E_SR_SECTOR_SIZE_IN_WORDS) |
| != (offset / I40E_SR_SECTOR_SIZE_IN_WORDS)) |
| /* A single write cannot spread over two sectors */ |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM write error: cannot spread over two sectors in a single write offset=%d words=%d\n", |
| offset, words); |
| else |
| ret_code = i40e_aq_read_nvm(hw, module_pointer, |
| 2 * offset, /*bytes*/ |
| 2 * words, /*bytes*/ |
| data, last_command, &cmd_details); |
| |
| return ret_code; |
| } |
| |
| /** |
| * i40e_read_nvm_word_aq - Reads Shadow RAM via AQ |
| * @hw: pointer to the HW structure |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF) |
| * @data: word read from the Shadow RAM |
| * |
| * Reads one 16 bit word from the Shadow RAM using the GLNVM_SRCTL register. |
| **/ |
| static i40e_status i40e_read_nvm_word_aq(struct i40e_hw *hw, u16 offset, |
| u16 *data) |
| { |
| i40e_status ret_code = I40E_ERR_TIMEOUT; |
| |
| ret_code = i40e_read_nvm_aq(hw, 0x0, offset, 1, data, true); |
| *data = le16_to_cpu(*(__le16 *)data); |
| |
| return ret_code; |
| } |
| |
| /** |
| * i40e_read_nvm_word - Reads Shadow RAM |
| * @hw: pointer to the HW structure |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF) |
| * @data: word read from the Shadow RAM |
| * |
| * Reads one 16 bit word from the Shadow RAM using the GLNVM_SRCTL register. |
| **/ |
| i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset, |
| u16 *data) |
| { |
| enum i40e_status_code ret_code = 0; |
| |
| if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE) { |
| ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); |
| if (!ret_code) { |
| ret_code = i40e_read_nvm_word_aq(hw, offset, data); |
| i40e_release_nvm(hw); |
| } |
| } else { |
| ret_code = i40e_read_nvm_word_srctl(hw, offset, data); |
| } |
| return ret_code; |
| } |
| |
| /** |
| * i40e_read_nvm_buffer_srctl - Reads Shadow RAM buffer via SRCTL register |
| * @hw: pointer to the HW structure |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF). |
| * @words: (in) number of words to read; (out) number of words actually read |
| * @data: words read from the Shadow RAM |
| * |
| * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd() |
| * method. The buffer read is preceded by the NVM ownership take |
| * and followed by the release. |
| **/ |
| static i40e_status i40e_read_nvm_buffer_srctl(struct i40e_hw *hw, u16 offset, |
| u16 *words, u16 *data) |
| { |
| i40e_status ret_code = 0; |
| u16 index, word; |
| |
| /* Loop thru the selected region */ |
| for (word = 0; word < *words; word++) { |
| index = offset + word; |
| ret_code = i40e_read_nvm_word_srctl(hw, index, &data[word]); |
| if (ret_code) |
| break; |
| } |
| |
| /* Update the number of words read from the Shadow RAM */ |
| *words = word; |
| |
| return ret_code; |
| } |
| |
| /** |
| * i40e_read_nvm_buffer_aq - Reads Shadow RAM buffer via AQ |
| * @hw: pointer to the HW structure |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF). |
| * @words: (in) number of words to read; (out) number of words actually read |
| * @data: words read from the Shadow RAM |
| * |
| * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_aq() |
| * method. The buffer read is preceded by the NVM ownership take |
| * and followed by the release. |
| **/ |
| static i40e_status i40e_read_nvm_buffer_aq(struct i40e_hw *hw, u16 offset, |
| u16 *words, u16 *data) |
| { |
| i40e_status ret_code; |
| u16 read_size = *words; |
| bool last_cmd = false; |
| u16 words_read = 0; |
| u16 i = 0; |
| |
| do { |
| /* Calculate number of bytes we should read in this step. |
| * FVL AQ do not allow to read more than one page at a time or |
| * to cross page boundaries. |
| */ |
| if (offset % I40E_SR_SECTOR_SIZE_IN_WORDS) |
| read_size = min(*words, |
| (u16)(I40E_SR_SECTOR_SIZE_IN_WORDS - |
| (offset % I40E_SR_SECTOR_SIZE_IN_WORDS))); |
| else |
| read_size = min((*words - words_read), |
| I40E_SR_SECTOR_SIZE_IN_WORDS); |
| |
| /* Check if this is last command, if so set proper flag */ |
| if ((words_read + read_size) >= *words) |
| last_cmd = true; |
| |
| ret_code = i40e_read_nvm_aq(hw, 0x0, offset, read_size, |
| data + words_read, last_cmd); |
| if (ret_code) |
| goto read_nvm_buffer_aq_exit; |
| |
| /* Increment counter for words already read and move offset to |
| * new read location |
| */ |
| words_read += read_size; |
| offset += read_size; |
| } while (words_read < *words); |
| |
| for (i = 0; i < *words; i++) |
| data[i] = le16_to_cpu(((__le16 *)data)[i]); |
| |
| read_nvm_buffer_aq_exit: |
| *words = words_read; |
| return ret_code; |
| } |
| |
| /** |
| * i40e_read_nvm_buffer - Reads Shadow RAM buffer |
| * @hw: pointer to the HW structure |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF). |
| * @words: (in) number of words to read; (out) number of words actually read |
| * @data: words read from the Shadow RAM |
| * |
| * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd() |
| * method. The buffer read is preceded by the NVM ownership take |
| * and followed by the release. |
| **/ |
| i40e_status i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset, |
| u16 *words, u16 *data) |
| { |
| enum i40e_status_code ret_code = 0; |
| |
| if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE) { |
| ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); |
| if (!ret_code) { |
| ret_code = i40e_read_nvm_buffer_aq(hw, offset, words, |
| data); |
| i40e_release_nvm(hw); |
| } |
| } else { |
| ret_code = i40e_read_nvm_buffer_srctl(hw, offset, words, data); |
| } |
| return ret_code; |
| } |
| |
| /** |
| * i40e_write_nvm_aq - Writes Shadow RAM. |
| * @hw: pointer to the HW structure. |
| * @module_pointer: module pointer location in words from the NVM beginning |
| * @offset: offset in words from module start |
| * @words: number of words to write |
| * @data: buffer with words to write to the Shadow RAM |
| * @last_command: tells the AdminQ that this is the last command |
| * |
| * Writes a 16 bit words buffer to the Shadow RAM using the admin command. |
| **/ |
| static i40e_status i40e_write_nvm_aq(struct i40e_hw *hw, u8 module_pointer, |
| u32 offset, u16 words, void *data, |
| bool last_command) |
| { |
| i40e_status ret_code = I40E_ERR_NVM; |
| struct i40e_asq_cmd_details cmd_details; |
| |
| memset(&cmd_details, 0, sizeof(cmd_details)); |
| cmd_details.wb_desc = &hw->nvm_wb_desc; |
| |
| /* Here we are checking the SR limit only for the flat memory model. |
| * We cannot do it for the module-based model, as we did not acquire |
| * the NVM resource yet (we cannot get the module pointer value). |
| * Firmware will check the module-based model. |
| */ |
| if ((offset + words) > hw->nvm.sr_size) |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM write error: offset %d beyond Shadow RAM limit %d\n", |
| (offset + words), hw->nvm.sr_size); |
| else if (words > I40E_SR_SECTOR_SIZE_IN_WORDS) |
| /* We can write only up to 4KB (one sector), in one AQ write */ |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM write fail error: tried to write %d words, limit is %d.\n", |
| words, I40E_SR_SECTOR_SIZE_IN_WORDS); |
| else if (((offset + (words - 1)) / I40E_SR_SECTOR_SIZE_IN_WORDS) |
| != (offset / I40E_SR_SECTOR_SIZE_IN_WORDS)) |
| /* A single write cannot spread over two sectors */ |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVM write error: cannot spread over two sectors in a single write offset=%d words=%d\n", |
| offset, words); |
| else |
| ret_code = i40e_aq_update_nvm(hw, module_pointer, |
| 2 * offset, /*bytes*/ |
| 2 * words, /*bytes*/ |
| data, last_command, &cmd_details); |
| |
| return ret_code; |
| } |
| |
| /** |
| * i40e_calc_nvm_checksum - Calculates and returns the checksum |
| * @hw: pointer to hardware structure |
| * @checksum: pointer to the checksum |
| * |
| * This function calculates SW Checksum that covers the whole 64kB shadow RAM |
| * except the VPD and PCIe ALT Auto-load modules. The structure and size of VPD |
| * is customer specific and unknown. Therefore, this function skips all maximum |
| * possible size of VPD (1kB). |
| **/ |
| static i40e_status i40e_calc_nvm_checksum(struct i40e_hw *hw, |
| u16 *checksum) |
| { |
| i40e_status ret_code; |
| struct i40e_virt_mem vmem; |
| u16 pcie_alt_module = 0; |
| u16 checksum_local = 0; |
| u16 vpd_module = 0; |
| u16 *data; |
| u16 i = 0; |
| |
| ret_code = i40e_allocate_virt_mem(hw, &vmem, |
| I40E_SR_SECTOR_SIZE_IN_WORDS * sizeof(u16)); |
| if (ret_code) |
| goto i40e_calc_nvm_checksum_exit; |
| data = (u16 *)vmem.va; |
| |
| /* read pointer to VPD area */ |
| ret_code = i40e_read_nvm_word(hw, I40E_SR_VPD_PTR, &vpd_module); |
| if (ret_code) { |
| ret_code = I40E_ERR_NVM_CHECKSUM; |
| goto i40e_calc_nvm_checksum_exit; |
| } |
| |
| /* read pointer to PCIe Alt Auto-load module */ |
| ret_code = i40e_read_nvm_word(hw, I40E_SR_PCIE_ALT_AUTO_LOAD_PTR, |
| &pcie_alt_module); |
| if (ret_code) { |
| ret_code = I40E_ERR_NVM_CHECKSUM; |
| goto i40e_calc_nvm_checksum_exit; |
| } |
| |
| /* Calculate SW checksum that covers the whole 64kB shadow RAM |
| * except the VPD and PCIe ALT Auto-load modules |
| */ |
| for (i = 0; i < hw->nvm.sr_size; i++) { |
| /* Read SR page */ |
| if ((i % I40E_SR_SECTOR_SIZE_IN_WORDS) == 0) { |
| u16 words = I40E_SR_SECTOR_SIZE_IN_WORDS; |
| |
| ret_code = i40e_read_nvm_buffer(hw, i, &words, data); |
| if (ret_code) { |
| ret_code = I40E_ERR_NVM_CHECKSUM; |
| goto i40e_calc_nvm_checksum_exit; |
| } |
| } |
| |
| /* Skip Checksum word */ |
| if (i == I40E_SR_SW_CHECKSUM_WORD) |
| continue; |
| /* Skip VPD module (convert byte size to word count) */ |
| if ((i >= (u32)vpd_module) && |
| (i < ((u32)vpd_module + |
| (I40E_SR_VPD_MODULE_MAX_SIZE / 2)))) { |
| continue; |
| } |
| /* Skip PCIe ALT module (convert byte size to word count) */ |
| if ((i >= (u32)pcie_alt_module) && |
| (i < ((u32)pcie_alt_module + |
| (I40E_SR_PCIE_ALT_MODULE_MAX_SIZE / 2)))) { |
| continue; |
| } |
| |
| checksum_local += data[i % I40E_SR_SECTOR_SIZE_IN_WORDS]; |
| } |
| |
| *checksum = (u16)I40E_SR_SW_CHECKSUM_BASE - checksum_local; |
| |
| i40e_calc_nvm_checksum_exit: |
| i40e_free_virt_mem(hw, &vmem); |
| return ret_code; |
| } |
| |
| /** |
| * i40e_update_nvm_checksum - Updates the NVM checksum |
| * @hw: pointer to hardware structure |
| * |
| * NVM ownership must be acquired before calling this function and released |
| * on ARQ completion event reception by caller. |
| * This function will commit SR to NVM. |
| **/ |
| i40e_status i40e_update_nvm_checksum(struct i40e_hw *hw) |
| { |
| i40e_status ret_code; |
| u16 checksum; |
| __le16 le_sum; |
| |
| ret_code = i40e_calc_nvm_checksum(hw, &checksum); |
| if (!ret_code) { |
| le_sum = cpu_to_le16(checksum); |
| ret_code = i40e_write_nvm_aq(hw, 0x00, I40E_SR_SW_CHECKSUM_WORD, |
| 1, &le_sum, true); |
| } |
| |
| return ret_code; |
| } |
| |
| /** |
| * i40e_validate_nvm_checksum - Validate EEPROM checksum |
| * @hw: pointer to hardware structure |
| * @checksum: calculated checksum |
| * |
| * Performs checksum calculation and validates the NVM SW checksum. If the |
| * caller does not need checksum, the value can be NULL. |
| **/ |
| i40e_status i40e_validate_nvm_checksum(struct i40e_hw *hw, |
| u16 *checksum) |
| { |
| i40e_status ret_code = 0; |
| u16 checksum_sr = 0; |
| u16 checksum_local = 0; |
| |
| ret_code = i40e_calc_nvm_checksum(hw, &checksum_local); |
| if (ret_code) |
| goto i40e_validate_nvm_checksum_exit; |
| |
| /* Do not use i40e_read_nvm_word() because we do not want to take |
| * the synchronization semaphores twice here. |
| */ |
| i40e_read_nvm_word(hw, I40E_SR_SW_CHECKSUM_WORD, &checksum_sr); |
| |
| /* Verify read checksum from EEPROM is the same as |
| * calculated checksum |
| */ |
| if (checksum_local != checksum_sr) |
| ret_code = I40E_ERR_NVM_CHECKSUM; |
| |
| /* If the user cares, return the calculated checksum */ |
| if (checksum) |
| *checksum = checksum_local; |
| |
| i40e_validate_nvm_checksum_exit: |
| return ret_code; |
| } |
| |
| static i40e_status i40e_nvmupd_state_init(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno); |
| static i40e_status i40e_nvmupd_state_reading(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno); |
| static i40e_status i40e_nvmupd_state_writing(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *errno); |
| static enum i40e_nvmupd_cmd i40e_nvmupd_validate_command(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| int *perrno); |
| static i40e_status i40e_nvmupd_nvm_erase(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| int *perrno); |
| static i40e_status i40e_nvmupd_nvm_write(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno); |
| static i40e_status i40e_nvmupd_nvm_read(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno); |
| static i40e_status i40e_nvmupd_exec_aq(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno); |
| static i40e_status i40e_nvmupd_get_aq_result(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno); |
| static inline u8 i40e_nvmupd_get_module(u32 val) |
| { |
| return (u8)(val & I40E_NVM_MOD_PNT_MASK); |
| } |
| static inline u8 i40e_nvmupd_get_transaction(u32 val) |
| { |
| return (u8)((val & I40E_NVM_TRANS_MASK) >> I40E_NVM_TRANS_SHIFT); |
| } |
| |
| static const char * const i40e_nvm_update_state_str[] = { |
| "I40E_NVMUPD_INVALID", |
| "I40E_NVMUPD_READ_CON", |
| "I40E_NVMUPD_READ_SNT", |
| "I40E_NVMUPD_READ_LCB", |
| "I40E_NVMUPD_READ_SA", |
| "I40E_NVMUPD_WRITE_ERA", |
| "I40E_NVMUPD_WRITE_CON", |
| "I40E_NVMUPD_WRITE_SNT", |
| "I40E_NVMUPD_WRITE_LCB", |
| "I40E_NVMUPD_WRITE_SA", |
| "I40E_NVMUPD_CSUM_CON", |
| "I40E_NVMUPD_CSUM_SA", |
| "I40E_NVMUPD_CSUM_LCB", |
| "I40E_NVMUPD_STATUS", |
| "I40E_NVMUPD_EXEC_AQ", |
| "I40E_NVMUPD_GET_AQ_RESULT", |
| }; |
| |
| /** |
| * i40e_nvmupd_command - Process an NVM update command |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command |
| * @bytes: pointer to the data buffer |
| * @perrno: pointer to return error code |
| * |
| * Dispatches command depending on what update state is current |
| **/ |
| i40e_status i40e_nvmupd_command(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno) |
| { |
| i40e_status status; |
| enum i40e_nvmupd_cmd upd_cmd; |
| |
| /* assume success */ |
| *perrno = 0; |
| |
| /* early check for status command and debug msgs */ |
| upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno); |
| |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s state %d nvm_release_on_hold %d opc 0x%04x cmd 0x%08x config 0x%08x offset 0x%08x data_size 0x%08x\n", |
| i40e_nvm_update_state_str[upd_cmd], |
| hw->nvmupd_state, |
| hw->nvm_release_on_done, hw->nvm_wait_opcode, |
| cmd->command, cmd->config, cmd->offset, cmd->data_size); |
| |
| if (upd_cmd == I40E_NVMUPD_INVALID) { |
| *perrno = -EFAULT; |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_validate_command returns %d errno %d\n", |
| upd_cmd, *perrno); |
| } |
| |
| /* a status request returns immediately rather than |
| * going into the state machine |
| */ |
| if (upd_cmd == I40E_NVMUPD_STATUS) { |
| if (!cmd->data_size) { |
| *perrno = -EFAULT; |
| return I40E_ERR_BUF_TOO_SHORT; |
| } |
| |
| bytes[0] = hw->nvmupd_state; |
| |
| if (cmd->data_size >= 4) { |
| bytes[1] = 0; |
| *((u16 *)&bytes[2]) = hw->nvm_wait_opcode; |
| } |
| |
| /* Clear error status on read */ |
| if (hw->nvmupd_state == I40E_NVMUPD_STATE_ERROR) |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; |
| |
| return 0; |
| } |
| |
| /* Clear status even it is not read and log */ |
| if (hw->nvmupd_state == I40E_NVMUPD_STATE_ERROR) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "Clearing I40E_NVMUPD_STATE_ERROR state without reading\n"); |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; |
| } |
| |
| switch (hw->nvmupd_state) { |
| case I40E_NVMUPD_STATE_INIT: |
| status = i40e_nvmupd_state_init(hw, cmd, bytes, perrno); |
| break; |
| |
| case I40E_NVMUPD_STATE_READING: |
| status = i40e_nvmupd_state_reading(hw, cmd, bytes, perrno); |
| break; |
| |
| case I40E_NVMUPD_STATE_WRITING: |
| status = i40e_nvmupd_state_writing(hw, cmd, bytes, perrno); |
| break; |
| |
| case I40E_NVMUPD_STATE_INIT_WAIT: |
| case I40E_NVMUPD_STATE_WRITE_WAIT: |
| /* if we need to stop waiting for an event, clear |
| * the wait info and return before doing anything else |
| */ |
| if (cmd->offset == 0xffff) { |
| i40e_nvmupd_check_wait_event(hw, hw->nvm_wait_opcode); |
| return 0; |
| } |
| |
| status = I40E_ERR_NOT_READY; |
| *perrno = -EBUSY; |
| break; |
| |
| default: |
| /* invalid state, should never happen */ |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVMUPD: no such state %d\n", hw->nvmupd_state); |
| status = I40E_NOT_SUPPORTED; |
| *perrno = -ESRCH; |
| break; |
| } |
| return status; |
| } |
| |
| /** |
| * i40e_nvmupd_state_init - Handle NVM update state Init |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @bytes: pointer to the data buffer |
| * @perrno: pointer to return error code |
| * |
| * Process legitimate commands of the Init state and conditionally set next |
| * state. Reject all other commands. |
| **/ |
| static i40e_status i40e_nvmupd_state_init(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno) |
| { |
| i40e_status status = 0; |
| enum i40e_nvmupd_cmd upd_cmd; |
| |
| upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno); |
| |
| switch (upd_cmd) { |
| case I40E_NVMUPD_READ_SA: |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); |
| if (status) { |
| *perrno = i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status); |
| } else { |
| status = i40e_nvmupd_nvm_read(hw, cmd, bytes, perrno); |
| i40e_release_nvm(hw); |
| } |
| break; |
| |
| case I40E_NVMUPD_READ_SNT: |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); |
| if (status) { |
| *perrno = i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status); |
| } else { |
| status = i40e_nvmupd_nvm_read(hw, cmd, bytes, perrno); |
| if (status) |
| i40e_release_nvm(hw); |
| else |
| hw->nvmupd_state = I40E_NVMUPD_STATE_READING; |
| } |
| break; |
| |
| case I40E_NVMUPD_WRITE_ERA: |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); |
| if (status) { |
| *perrno = i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status); |
| } else { |
| status = i40e_nvmupd_nvm_erase(hw, cmd, perrno); |
| if (status) { |
| i40e_release_nvm(hw); |
| } else { |
| hw->nvm_release_on_done = true; |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_erase; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; |
| } |
| } |
| break; |
| |
| case I40E_NVMUPD_WRITE_SA: |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); |
| if (status) { |
| *perrno = i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status); |
| } else { |
| status = i40e_nvmupd_nvm_write(hw, cmd, bytes, perrno); |
| if (status) { |
| i40e_release_nvm(hw); |
| } else { |
| hw->nvm_release_on_done = true; |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; |
| } |
| } |
| break; |
| |
| case I40E_NVMUPD_WRITE_SNT: |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); |
| if (status) { |
| *perrno = i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status); |
| } else { |
| status = i40e_nvmupd_nvm_write(hw, cmd, bytes, perrno); |
| if (status) { |
| i40e_release_nvm(hw); |
| } else { |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_WRITE_WAIT; |
| } |
| } |
| break; |
| |
| case I40E_NVMUPD_CSUM_SA: |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); |
| if (status) { |
| *perrno = i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status); |
| } else { |
| status = i40e_update_nvm_checksum(hw); |
| if (status) { |
| *perrno = hw->aq.asq_last_status ? |
| i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status) : |
| -EIO; |
| i40e_release_nvm(hw); |
| } else { |
| hw->nvm_release_on_done = true; |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; |
| } |
| } |
| break; |
| |
| case I40E_NVMUPD_EXEC_AQ: |
| status = i40e_nvmupd_exec_aq(hw, cmd, bytes, perrno); |
| break; |
| |
| case I40E_NVMUPD_GET_AQ_RESULT: |
| status = i40e_nvmupd_get_aq_result(hw, cmd, bytes, perrno); |
| break; |
| |
| default: |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVMUPD: bad cmd %s in init state\n", |
| i40e_nvm_update_state_str[upd_cmd]); |
| status = I40E_ERR_NVM; |
| *perrno = -ESRCH; |
| break; |
| } |
| return status; |
| } |
| |
| /** |
| * i40e_nvmupd_state_reading - Handle NVM update state Reading |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @bytes: pointer to the data buffer |
| * @perrno: pointer to return error code |
| * |
| * NVM ownership is already held. Process legitimate commands and set any |
| * change in state; reject all other commands. |
| **/ |
| static i40e_status i40e_nvmupd_state_reading(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno) |
| { |
| i40e_status status = 0; |
| enum i40e_nvmupd_cmd upd_cmd; |
| |
| upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno); |
| |
| switch (upd_cmd) { |
| case I40E_NVMUPD_READ_SA: |
| case I40E_NVMUPD_READ_CON: |
| status = i40e_nvmupd_nvm_read(hw, cmd, bytes, perrno); |
| break; |
| |
| case I40E_NVMUPD_READ_LCB: |
| status = i40e_nvmupd_nvm_read(hw, cmd, bytes, perrno); |
| i40e_release_nvm(hw); |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; |
| break; |
| |
| default: |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVMUPD: bad cmd %s in reading state.\n", |
| i40e_nvm_update_state_str[upd_cmd]); |
| status = I40E_NOT_SUPPORTED; |
| *perrno = -ESRCH; |
| break; |
| } |
| return status; |
| } |
| |
| /** |
| * i40e_nvmupd_state_writing - Handle NVM update state Writing |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @bytes: pointer to the data buffer |
| * @perrno: pointer to return error code |
| * |
| * NVM ownership is already held. Process legitimate commands and set any |
| * change in state; reject all other commands |
| **/ |
| static i40e_status i40e_nvmupd_state_writing(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno) |
| { |
| i40e_status status = 0; |
| enum i40e_nvmupd_cmd upd_cmd; |
| bool retry_attempt = false; |
| |
| upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno); |
| |
| retry: |
| switch (upd_cmd) { |
| case I40E_NVMUPD_WRITE_CON: |
| status = i40e_nvmupd_nvm_write(hw, cmd, bytes, perrno); |
| if (!status) { |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_WRITE_WAIT; |
| } |
| break; |
| |
| case I40E_NVMUPD_WRITE_LCB: |
| status = i40e_nvmupd_nvm_write(hw, cmd, bytes, perrno); |
| if (status) { |
| *perrno = hw->aq.asq_last_status ? |
| i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status) : |
| -EIO; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; |
| } else { |
| hw->nvm_release_on_done = true; |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; |
| } |
| break; |
| |
| case I40E_NVMUPD_CSUM_CON: |
| status = i40e_update_nvm_checksum(hw); |
| if (status) { |
| *perrno = hw->aq.asq_last_status ? |
| i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status) : |
| -EIO; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; |
| } else { |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_WRITE_WAIT; |
| } |
| break; |
| |
| case I40E_NVMUPD_CSUM_LCB: |
| status = i40e_update_nvm_checksum(hw); |
| if (status) { |
| *perrno = hw->aq.asq_last_status ? |
| i40e_aq_rc_to_posix(status, |
| hw->aq.asq_last_status) : |
| -EIO; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; |
| } else { |
| hw->nvm_release_on_done = true; |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; |
| } |
| break; |
| |
| default: |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVMUPD: bad cmd %s in writing state.\n", |
| i40e_nvm_update_state_str[upd_cmd]); |
| status = I40E_NOT_SUPPORTED; |
| *perrno = -ESRCH; |
| break; |
| } |
| |
| /* In some circumstances, a multi-write transaction takes longer |
| * than the default 3 minute timeout on the write semaphore. If |
| * the write failed with an EBUSY status, this is likely the problem, |
| * so here we try to reacquire the semaphore then retry the write. |
| * We only do one retry, then give up. |
| */ |
| if (status && (hw->aq.asq_last_status == I40E_AQ_RC_EBUSY) && |
| !retry_attempt) { |
| i40e_status old_status = status; |
| u32 old_asq_status = hw->aq.asq_last_status; |
| u32 gtime; |
| |
| gtime = rd32(hw, I40E_GLVFGEN_TIMER); |
| if (gtime >= hw->nvm.hw_semaphore_timeout) { |
| i40e_debug(hw, I40E_DEBUG_ALL, |
| "NVMUPD: write semaphore expired (%d >= %lld), retrying\n", |
| gtime, hw->nvm.hw_semaphore_timeout); |
| i40e_release_nvm(hw); |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_ALL, |
| "NVMUPD: write semaphore reacquire failed aq_err = %d\n", |
| hw->aq.asq_last_status); |
| status = old_status; |
| hw->aq.asq_last_status = old_asq_status; |
| } else { |
| retry_attempt = true; |
| goto retry; |
| } |
| } |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_nvmupd_check_wait_event - handle NVM update operation events |
| * @hw: pointer to the hardware structure |
| * @opcode: the event that just happened |
| **/ |
| void i40e_nvmupd_check_wait_event(struct i40e_hw *hw, u16 opcode) |
| { |
| if (opcode == hw->nvm_wait_opcode) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVMUPD: clearing wait on opcode 0x%04x\n", opcode); |
| if (hw->nvm_release_on_done) { |
| i40e_release_nvm(hw); |
| hw->nvm_release_on_done = false; |
| } |
| hw->nvm_wait_opcode = 0; |
| |
| if (hw->aq.arq_last_status) { |
| hw->nvmupd_state = I40E_NVMUPD_STATE_ERROR; |
| return; |
| } |
| |
| switch (hw->nvmupd_state) { |
| case I40E_NVMUPD_STATE_INIT_WAIT: |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; |
| break; |
| |
| case I40E_NVMUPD_STATE_WRITE_WAIT: |
| hw->nvmupd_state = I40E_NVMUPD_STATE_WRITING; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| } |
| |
| /** |
| * i40e_nvmupd_validate_command - Validate given command |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @perrno: pointer to return error code |
| * |
| * Return one of the valid command types or I40E_NVMUPD_INVALID |
| **/ |
| static enum i40e_nvmupd_cmd i40e_nvmupd_validate_command(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| int *perrno) |
| { |
| enum i40e_nvmupd_cmd upd_cmd; |
| u8 module, transaction; |
| |
| /* anything that doesn't match a recognized case is an error */ |
| upd_cmd = I40E_NVMUPD_INVALID; |
| |
| transaction = i40e_nvmupd_get_transaction(cmd->config); |
| module = i40e_nvmupd_get_module(cmd->config); |
| |
| /* limits on data size */ |
| if ((cmd->data_size < 1) || |
| (cmd->data_size > I40E_NVMUPD_MAX_DATA)) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_validate_command data_size %d\n", |
| cmd->data_size); |
| *perrno = -EFAULT; |
| return I40E_NVMUPD_INVALID; |
| } |
| |
| switch (cmd->command) { |
| case I40E_NVM_READ: |
| switch (transaction) { |
| case I40E_NVM_CON: |
| upd_cmd = I40E_NVMUPD_READ_CON; |
| break; |
| case I40E_NVM_SNT: |
| upd_cmd = I40E_NVMUPD_READ_SNT; |
| break; |
| case I40E_NVM_LCB: |
| upd_cmd = I40E_NVMUPD_READ_LCB; |
| break; |
| case I40E_NVM_SA: |
| upd_cmd = I40E_NVMUPD_READ_SA; |
| break; |
| case I40E_NVM_EXEC: |
| if (module == 0xf) |
| upd_cmd = I40E_NVMUPD_STATUS; |
| else if (module == 0) |
| upd_cmd = I40E_NVMUPD_GET_AQ_RESULT; |
| break; |
| } |
| break; |
| |
| case I40E_NVM_WRITE: |
| switch (transaction) { |
| case I40E_NVM_CON: |
| upd_cmd = I40E_NVMUPD_WRITE_CON; |
| break; |
| case I40E_NVM_SNT: |
| upd_cmd = I40E_NVMUPD_WRITE_SNT; |
| break; |
| case I40E_NVM_LCB: |
| upd_cmd = I40E_NVMUPD_WRITE_LCB; |
| break; |
| case I40E_NVM_SA: |
| upd_cmd = I40E_NVMUPD_WRITE_SA; |
| break; |
| case I40E_NVM_ERA: |
| upd_cmd = I40E_NVMUPD_WRITE_ERA; |
| break; |
| case I40E_NVM_CSUM: |
| upd_cmd = I40E_NVMUPD_CSUM_CON; |
| break; |
| case (I40E_NVM_CSUM|I40E_NVM_SA): |
| upd_cmd = I40E_NVMUPD_CSUM_SA; |
| break; |
| case (I40E_NVM_CSUM|I40E_NVM_LCB): |
| upd_cmd = I40E_NVMUPD_CSUM_LCB; |
| break; |
| case I40E_NVM_EXEC: |
| if (module == 0) |
| upd_cmd = I40E_NVMUPD_EXEC_AQ; |
| break; |
| } |
| break; |
| } |
| |
| return upd_cmd; |
| } |
| |
| /** |
| * i40e_nvmupd_exec_aq - Run an AQ command |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @bytes: pointer to the data buffer |
| * @perrno: pointer to return error code |
| * |
| * cmd structure contains identifiers and data buffer |
| **/ |
| static i40e_status i40e_nvmupd_exec_aq(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno) |
| { |
| struct i40e_asq_cmd_details cmd_details; |
| i40e_status status; |
| struct i40e_aq_desc *aq_desc; |
| u32 buff_size = 0; |
| u8 *buff = NULL; |
| u32 aq_desc_len; |
| u32 aq_data_len; |
| |
| i40e_debug(hw, I40E_DEBUG_NVM, "NVMUPD: %s\n", __func__); |
| memset(&cmd_details, 0, sizeof(cmd_details)); |
| cmd_details.wb_desc = &hw->nvm_wb_desc; |
| |
| aq_desc_len = sizeof(struct i40e_aq_desc); |
| memset(&hw->nvm_wb_desc, 0, aq_desc_len); |
| |
| /* get the aq descriptor */ |
| if (cmd->data_size < aq_desc_len) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVMUPD: not enough aq desc bytes for exec, size %d < %d\n", |
| cmd->data_size, aq_desc_len); |
| *perrno = -EINVAL; |
| return I40E_ERR_PARAM; |
| } |
| aq_desc = (struct i40e_aq_desc *)bytes; |
| |
| /* if data buffer needed, make sure it's ready */ |
| aq_data_len = cmd->data_size - aq_desc_len; |
| buff_size = max_t(u32, aq_data_len, le16_to_cpu(aq_desc->datalen)); |
| if (buff_size) { |
| if (!hw->nvm_buff.va) { |
| status = i40e_allocate_virt_mem(hw, &hw->nvm_buff, |
| hw->aq.asq_buf_size); |
| if (status) |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "NVMUPD: i40e_allocate_virt_mem for exec buff failed, %d\n", |
| status); |
| } |
| |
| if (hw->nvm_buff.va) { |
| buff = hw->nvm_buff.va; |
| memcpy(buff, &bytes[aq_desc_len], aq_data_len); |
| } |
| } |
| |
| /* and away we go! */ |
| status = i40e_asq_send_command(hw, aq_desc, buff, |
| buff_size, &cmd_details); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_exec_aq err %s aq_err %s\n", |
| i40e_stat_str(hw, status), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| *perrno = i40e_aq_rc_to_posix(status, hw->aq.asq_last_status); |
| } |
| |
| /* should we wait for a followup event? */ |
| if (cmd->offset) { |
| hw->nvm_wait_opcode = cmd->offset; |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_nvmupd_get_aq_result - Get the results from the previous exec_aq |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @bytes: pointer to the data buffer |
| * @perrno: pointer to return error code |
| * |
| * cmd structure contains identifiers and data buffer |
| **/ |
| static i40e_status i40e_nvmupd_get_aq_result(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno) |
| { |
| u32 aq_total_len; |
| u32 aq_desc_len; |
| int remainder; |
| u8 *buff; |
| |
| i40e_debug(hw, I40E_DEBUG_NVM, "NVMUPD: %s\n", __func__); |
| |
| aq_desc_len = sizeof(struct i40e_aq_desc); |
| aq_total_len = aq_desc_len + le16_to_cpu(hw->nvm_wb_desc.datalen); |
| |
| /* check offset range */ |
| if (cmd->offset > aq_total_len) { |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s: offset too big %d > %d\n", |
| __func__, cmd->offset, aq_total_len); |
| *perrno = -EINVAL; |
| return I40E_ERR_PARAM; |
| } |
| |
| /* check copylength range */ |
| if (cmd->data_size > (aq_total_len - cmd->offset)) { |
| int new_len = aq_total_len - cmd->offset; |
| |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s: copy length %d too big, trimming to %d\n", |
| __func__, cmd->data_size, new_len); |
| cmd->data_size = new_len; |
| } |
| |
| remainder = cmd->data_size; |
| if (cmd->offset < aq_desc_len) { |
| u32 len = aq_desc_len - cmd->offset; |
| |
| len = min(len, cmd->data_size); |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s: aq_desc bytes %d to %d\n", |
| __func__, cmd->offset, cmd->offset + len); |
| |
| buff = ((u8 *)&hw->nvm_wb_desc) + cmd->offset; |
| memcpy(bytes, buff, len); |
| |
| bytes += len; |
| remainder -= len; |
| buff = hw->nvm_buff.va; |
| } else { |
| buff = hw->nvm_buff.va + (cmd->offset - aq_desc_len); |
| } |
| |
| if (remainder > 0) { |
| int start_byte = buff - (u8 *)hw->nvm_buff.va; |
| |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s: databuf bytes %d to %d\n", |
| __func__, start_byte, start_byte + remainder); |
| memcpy(bytes, buff, remainder); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_nvmupd_nvm_read - Read NVM |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @bytes: pointer to the data buffer |
| * @perrno: pointer to return error code |
| * |
| * cmd structure contains identifiers and data buffer |
| **/ |
| static i40e_status i40e_nvmupd_nvm_read(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno) |
| { |
| struct i40e_asq_cmd_details cmd_details; |
| i40e_status status; |
| u8 module, transaction; |
| bool last; |
| |
| transaction = i40e_nvmupd_get_transaction(cmd->config); |
| module = i40e_nvmupd_get_module(cmd->config); |
| last = (transaction == I40E_NVM_LCB) || (transaction == I40E_NVM_SA); |
| |
| memset(&cmd_details, 0, sizeof(cmd_details)); |
| cmd_details.wb_desc = &hw->nvm_wb_desc; |
| |
| status = i40e_aq_read_nvm(hw, module, cmd->offset, (u16)cmd->data_size, |
| bytes, last, &cmd_details); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_nvm_read mod 0x%x off 0x%x len 0x%x\n", |
| module, cmd->offset, cmd->data_size); |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_nvm_read status %d aq %d\n", |
| status, hw->aq.asq_last_status); |
| *perrno = i40e_aq_rc_to_posix(status, hw->aq.asq_last_status); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_nvmupd_nvm_erase - Erase an NVM module |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @perrno: pointer to return error code |
| * |
| * module, offset, data_size and data are in cmd structure |
| **/ |
| static i40e_status i40e_nvmupd_nvm_erase(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| int *perrno) |
| { |
| i40e_status status = 0; |
| struct i40e_asq_cmd_details cmd_details; |
| u8 module, transaction; |
| bool last; |
| |
| transaction = i40e_nvmupd_get_transaction(cmd->config); |
| module = i40e_nvmupd_get_module(cmd->config); |
| last = (transaction & I40E_NVM_LCB); |
| |
| memset(&cmd_details, 0, sizeof(cmd_details)); |
| cmd_details.wb_desc = &hw->nvm_wb_desc; |
| |
| status = i40e_aq_erase_nvm(hw, module, cmd->offset, (u16)cmd->data_size, |
| last, &cmd_details); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_nvm_erase mod 0x%x off 0x%x len 0x%x\n", |
| module, cmd->offset, cmd->data_size); |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_nvm_erase status %d aq %d\n", |
| status, hw->aq.asq_last_status); |
| *perrno = i40e_aq_rc_to_posix(status, hw->aq.asq_last_status); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_nvmupd_nvm_write - Write NVM |
| * @hw: pointer to hardware structure |
| * @cmd: pointer to nvm update command buffer |
| * @bytes: pointer to the data buffer |
| * @perrno: pointer to return error code |
| * |
| * module, offset, data_size and data are in cmd structure |
| **/ |
| static i40e_status i40e_nvmupd_nvm_write(struct i40e_hw *hw, |
| struct i40e_nvm_access *cmd, |
| u8 *bytes, int *perrno) |
| { |
| i40e_status status = 0; |
| struct i40e_asq_cmd_details cmd_details; |
| u8 module, transaction; |
| bool last; |
| |
| transaction = i40e_nvmupd_get_transaction(cmd->config); |
| module = i40e_nvmupd_get_module(cmd->config); |
| last = (transaction & I40E_NVM_LCB); |
| |
| memset(&cmd_details, 0, sizeof(cmd_details)); |
| cmd_details.wb_desc = &hw->nvm_wb_desc; |
| |
| status = i40e_aq_update_nvm(hw, module, cmd->offset, |
| (u16)cmd->data_size, bytes, last, |
| &cmd_details); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_nvm_write mod 0x%x off 0x%x len 0x%x\n", |
| module, cmd->offset, cmd->data_size); |
| i40e_debug(hw, I40E_DEBUG_NVM, |
| "i40e_nvmupd_nvm_write status %d aq %d\n", |
| status, hw->aq.asq_last_status); |
| *perrno = i40e_aq_rc_to_posix(status, hw->aq.asq_last_status); |
| } |
| |
| return status; |
| } |