PM / devfreq: Move exynos4 devfreq driver into a new sub-directory
In anticipation of the new exynos5 devfreq and ppmu driver, create
an exynos sub-directory. Move the existing exynos4 devfreq driver
into the same.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Jonghwan Choi <jhbird.choi@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile
new file mode 100644
index 0000000..1498823
--- /dev/null
+++ b/drivers/devfreq/exynos/Makefile
@@ -0,0 +1,2 @@
+# Exynos DEVFREQ Drivers
+obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o
diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c
new file mode 100644
index 0000000..3f37f3b
--- /dev/null
+++ b/drivers/devfreq/exynos/exynos4_bus.c
@@ -0,0 +1,1153 @@
+/* drivers/devfreq/exynos4210_memorybus.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework
+ * This version supports EXYNOS4210 only. This changes bus frequencies
+ * and vddint voltages. Exynos4412/4212 should be able to be supported
+ * with minor modifications.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/suspend.h>
+#include <linux/opp.h>
+#include <linux/devfreq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+
+/* Exynos4 ASV has been in the mailing list, but not upstreamed, yet. */
+#ifdef CONFIG_EXYNOS_ASV
+extern unsigned int exynos_result_of_asv;
+#endif
+
+#include <mach/regs-clock.h>
+
+#include <plat/map-s5p.h>
+
+#define MAX_SAFEVOLT 1200000 /* 1.2V */
+
+enum exynos4_busf_type {
+ TYPE_BUSF_EXYNOS4210,
+ TYPE_BUSF_EXYNOS4x12,
+};
+
+/* Assume that the bus is saturated if the utilization is 40% */
+#define BUS_SATURATION_RATIO 40
+
+enum ppmu_counter {
+ PPMU_PMNCNT0 = 0,
+ PPMU_PMCCNT1,
+ PPMU_PMNCNT2,
+ PPMU_PMNCNT3,
+ PPMU_PMNCNT_MAX,
+};
+struct exynos4_ppmu {
+ void __iomem *hw_base;
+ unsigned int ccnt;
+ unsigned int event;
+ unsigned int count[PPMU_PMNCNT_MAX];
+ bool ccnt_overflow;
+ bool count_overflow[PPMU_PMNCNT_MAX];
+};
+
+enum busclk_level_idx {
+ LV_0 = 0,
+ LV_1,
+ LV_2,
+ LV_3,
+ LV_4,
+ _LV_END
+};
+#define EX4210_LV_MAX LV_2
+#define EX4x12_LV_MAX LV_4
+#define EX4210_LV_NUM (LV_2 + 1)
+#define EX4x12_LV_NUM (LV_4 + 1)
+
+/**
+ * struct busfreq_opp_info - opp information for bus
+ * @rate: Frequency in hertz
+ * @volt: Voltage in microvolts corresponding to this OPP
+ */
+struct busfreq_opp_info {
+ unsigned long rate;
+ unsigned long volt;
+};
+
+struct busfreq_data {
+ enum exynos4_busf_type type;
+ struct device *dev;
+ struct devfreq *devfreq;
+ bool disabled;
+ struct regulator *vdd_int;
+ struct regulator *vdd_mif; /* Exynos4412/4212 only */
+ struct busfreq_opp_info curr_oppinfo;
+ struct exynos4_ppmu dmc[2];
+
+ struct notifier_block pm_notifier;
+ struct mutex lock;
+
+ /* Dividers calculated at boot/probe-time */
+ unsigned int dmc_divtable[_LV_END]; /* DMC0 */
+ unsigned int top_divtable[_LV_END];
+};
+
+struct bus_opp_table {
+ unsigned int idx;
+ unsigned long clk;
+ unsigned long volt;
+};
+
+/* 4210 controls clock of mif and voltage of int */
+static struct bus_opp_table exynos4210_busclk_table[] = {
+ {LV_0, 400000, 1150000},
+ {LV_1, 267000, 1050000},
+ {LV_2, 133000, 1025000},
+ {0, 0, 0},
+};
+
+/*
+ * MIF is the main control knob clock for exynox4x12 MIF/INT
+ * clock and voltage of both mif/int are controlled.
+ */
+static struct bus_opp_table exynos4x12_mifclk_table[] = {
+ {LV_0, 400000, 1100000},
+ {LV_1, 267000, 1000000},
+ {LV_2, 160000, 950000},
+ {LV_3, 133000, 950000},
+ {LV_4, 100000, 950000},
+ {0, 0, 0},
+};
+
+/*
+ * INT is not the control knob of 4x12. LV_x is not meant to represent
+ * the current performance. (MIF does)
+ */
+static struct bus_opp_table exynos4x12_intclk_table[] = {
+ {LV_0, 200000, 1000000},
+ {LV_1, 160000, 950000},
+ {LV_2, 133000, 925000},
+ {LV_3, 100000, 900000},
+ {0, 0, 0},
+};
+
+/* TODO: asv volt definitions are "__initdata"? */
+/* Some chips have different operating voltages */
+static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = {
+ {1150000, 1050000, 1050000},
+ {1125000, 1025000, 1025000},
+ {1100000, 1000000, 1000000},
+ {1075000, 975000, 975000},
+ {1050000, 950000, 950000},
+};
+
+static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = {
+ /* 400 267 160 133 100 */
+ {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */
+ {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */
+ {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */
+ {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */
+ {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */
+ {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */
+ {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */
+ {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */
+ {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */
+};
+
+static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = {
+ /* 200 160 133 100 */
+ {1000000, 950000, 925000, 900000}, /* ASV0 */
+ {975000, 925000, 925000, 900000}, /* ASV1 */
+ {950000, 925000, 900000, 875000}, /* ASV2 */
+ {950000, 900000, 900000, 875000}, /* ASV3 */
+ {925000, 875000, 875000, 875000}, /* ASV4 */
+ {900000, 850000, 850000, 850000}, /* ASV5 */
+ {900000, 850000, 850000, 850000}, /* ASV6 */
+ {900000, 850000, 850000, 850000}, /* ASV7 */
+ {900000, 850000, 850000, 850000}, /* ASV8 */
+};
+
+/*** Clock Divider Data for Exynos4210 ***/
+static unsigned int exynos4210_clkdiv_dmc0[][8] = {
+ /*
+ * Clock divider value for following
+ * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
+ * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
+ */
+
+ /* DMC L0: 400MHz */
+ { 3, 1, 1, 1, 1, 1, 3, 1 },
+ /* DMC L1: 266.7MHz */
+ { 4, 1, 1, 2, 1, 1, 3, 1 },
+ /* DMC L2: 133MHz */
+ { 5, 1, 1, 5, 1, 1, 3, 1 },
+};
+static unsigned int exynos4210_clkdiv_top[][5] = {
+ /*
+ * Clock divider value for following
+ * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
+ */
+ /* ACLK200 L0: 200MHz */
+ { 3, 7, 4, 5, 1 },
+ /* ACLK200 L1: 160MHz */
+ { 4, 7, 5, 6, 1 },
+ /* ACLK200 L2: 133MHz */
+ { 5, 7, 7, 7, 1 },
+};
+static unsigned int exynos4210_clkdiv_lr_bus[][2] = {
+ /*
+ * Clock divider value for following
+ * { DIVGDL/R, DIVGPL/R }
+ */
+ /* ACLK_GDL/R L1: 200MHz */
+ { 3, 1 },
+ /* ACLK_GDL/R L2: 160MHz */
+ { 4, 1 },
+ /* ACLK_GDL/R L3: 133MHz */
+ { 5, 1 },
+};
+
+/*** Clock Divider Data for Exynos4212/4412 ***/
+static unsigned int exynos4x12_clkdiv_dmc0[][6] = {
+ /*
+ * Clock divider value for following
+ * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
+ * DIVDMCP}
+ */
+
+ /* DMC L0: 400MHz */
+ {3, 1, 1, 1, 1, 1},
+ /* DMC L1: 266.7MHz */
+ {4, 1, 1, 2, 1, 1},
+ /* DMC L2: 160MHz */
+ {5, 1, 1, 4, 1, 1},
+ /* DMC L3: 133MHz */
+ {5, 1, 1, 5, 1, 1},
+ /* DMC L4: 100MHz */
+ {7, 1, 1, 7, 1, 1},
+};
+static unsigned int exynos4x12_clkdiv_dmc1[][6] = {
+ /*
+ * Clock divider value for following
+ * { G2DACP, DIVC2C, DIVC2C_ACLK }
+ */
+
+ /* DMC L0: 400MHz */
+ {3, 1, 1},
+ /* DMC L1: 266.7MHz */
+ {4, 2, 1},
+ /* DMC L2: 160MHz */
+ {5, 4, 1},
+ /* DMC L3: 133MHz */
+ {5, 5, 1},
+ /* DMC L4: 100MHz */
+ {7, 7, 1},
+};
+static unsigned int exynos4x12_clkdiv_top[][5] = {
+ /*
+ * Clock divider value for following
+ * { DIVACLK266_GPS, DIVACLK100, DIVACLK160,
+ DIVACLK133, DIVONENAND }
+ */
+
+ /* ACLK_GDL/R L0: 200MHz */
+ {2, 7, 4, 5, 1},
+ /* ACLK_GDL/R L1: 200MHz */
+ {2, 7, 4, 5, 1},
+ /* ACLK_GDL/R L2: 160MHz */
+ {4, 7, 5, 7, 1},
+ /* ACLK_GDL/R L3: 133MHz */
+ {4, 7, 5, 7, 1},
+ /* ACLK_GDL/R L4: 100MHz */
+ {7, 7, 7, 7, 1},
+};
+static unsigned int exynos4x12_clkdiv_lr_bus[][2] = {
+ /*
+ * Clock divider value for following
+ * { DIVGDL/R, DIVGPL/R }
+ */
+
+ /* ACLK_GDL/R L0: 200MHz */
+ {3, 1},
+ /* ACLK_GDL/R L1: 200MHz */
+ {3, 1},
+ /* ACLK_GDL/R L2: 160MHz */
+ {4, 1},
+ /* ACLK_GDL/R L3: 133MHz */
+ {5, 1},
+ /* ACLK_GDL/R L4: 100MHz */
+ {7, 1},
+};
+static unsigned int exynos4x12_clkdiv_sclkip[][3] = {
+ /*
+ * Clock divider value for following
+ * { DIVMFC, DIVJPEG, DIVFIMC0~3}
+ */
+
+ /* SCLK_MFC: 200MHz */
+ {3, 3, 4},
+ /* SCLK_MFC: 200MHz */
+ {3, 3, 4},
+ /* SCLK_MFC: 160MHz */
+ {4, 4, 5},
+ /* SCLK_MFC: 133MHz */
+ {5, 5, 5},
+ /* SCLK_MFC: 100MHz */
+ {7, 7, 7},
+};
+
+
+static int exynos4210_set_busclk(struct busfreq_data *data,
+ struct busfreq_opp_info *oppi)
+{
+ unsigned int index;
+ unsigned int tmp;
+
+ for (index = LV_0; index < EX4210_LV_NUM; index++)
+ if (oppi->rate == exynos4210_busclk_table[index].clk)
+ break;
+
+ if (index == EX4210_LV_NUM)
+ return -EINVAL;
+
+ /* Change Divider - DMC0 */
+ tmp = data->dmc_divtable[index];
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
+ } while (tmp & 0x11111111);
+
+ /* Change Divider - TOP */
+ tmp = data->top_divtable[index];
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
+ } while (tmp & 0x11111);
+
+ /* Change Divider - LEFTBUS */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
+
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
+
+ tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
+ (exynos4210_clkdiv_lr_bus[index][1] <<
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
+ } while (tmp & 0x11);
+
+ /* Change Divider - RIGHTBUS */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
+
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
+
+ tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
+ (exynos4210_clkdiv_lr_bus[index][1] <<
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
+ } while (tmp & 0x11);
+
+ return 0;
+}
+
+static int exynos4x12_set_busclk(struct busfreq_data *data,
+ struct busfreq_opp_info *oppi)
+{
+ unsigned int index;
+ unsigned int tmp;
+
+ for (index = LV_0; index < EX4x12_LV_NUM; index++)
+ if (oppi->rate == exynos4x12_mifclk_table[index].clk)
+ break;
+
+ if (index == EX4x12_LV_NUM)
+ return -EINVAL;
+
+ /* Change Divider - DMC0 */
+ tmp = data->dmc_divtable[index];
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
+ } while (tmp & 0x11111111);
+
+ /* Change Divider - DMC1 */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1);
+
+ tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC1_C2C_MASK |
+ EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK);
+
+ tmp |= ((exynos4x12_clkdiv_dmc1[index][0] <<
+ EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) |
+ (exynos4x12_clkdiv_dmc1[index][1] <<
+ EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) |
+ (exynos4x12_clkdiv_dmc1[index][2] <<
+ EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1);
+ } while (tmp & 0x111111);
+
+ /* Change Divider - TOP */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
+
+ tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
+ EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
+
+ tmp |= ((exynos4x12_clkdiv_top[index][0] <<
+ EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
+ (exynos4x12_clkdiv_top[index][1] <<
+ EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
+ (exynos4x12_clkdiv_top[index][2] <<
+ EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
+ (exynos4x12_clkdiv_top[index][3] <<
+ EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
+ (exynos4x12_clkdiv_top[index][4] <<
+ EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
+ } while (tmp & 0x11111);
+
+ /* Change Divider - LEFTBUS */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
+
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
+
+ tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
+ (exynos4x12_clkdiv_lr_bus[index][1] <<
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
+ } while (tmp & 0x11);
+
+ /* Change Divider - RIGHTBUS */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
+
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
+
+ tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
+ (exynos4x12_clkdiv_lr_bus[index][1] <<
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
+ } while (tmp & 0x11);
+
+ /* Change Divider - MFC */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_MFC);
+
+ tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK);
+
+ tmp |= ((exynos4x12_clkdiv_sclkip[index][0] <<
+ EXYNOS4_CLKDIV_MFC_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_MFC);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC);
+ } while (tmp & 0x1);
+
+ /* Change Divider - JPEG */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1);
+
+ tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK);
+
+ tmp |= ((exynos4x12_clkdiv_sclkip[index][1] <<
+ EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
+ } while (tmp & 0x1);
+
+ /* Change Divider - FIMC0~3 */
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CAM);
+
+ tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK |
+ EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK);
+
+ tmp |= ((exynos4x12_clkdiv_sclkip[index][2] <<
+ EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) |
+ (exynos4x12_clkdiv_sclkip[index][2] <<
+ EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) |
+ (exynos4x12_clkdiv_sclkip[index][2] <<
+ EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) |
+ (exynos4x12_clkdiv_sclkip[index][2] <<
+ EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT));
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CAM);
+
+ do {
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
+ } while (tmp & 0x1111);
+
+ return 0;
+}
+
+
+static void busfreq_mon_reset(struct busfreq_data *data)
+{
+ unsigned int i;
+
+ for (i = 0; i < 2; i++) {
+ void __iomem *ppmu_base = data->dmc[i].hw_base;
+
+ /* Reset PPMU */
+ __raw_writel(0x8000000f, ppmu_base + 0xf010);
+ __raw_writel(0x8000000f, ppmu_base + 0xf050);
+ __raw_writel(0x6, ppmu_base + 0xf000);
+ __raw_writel(0x0, ppmu_base + 0xf100);
+
+ /* Set PPMU Event */
+ data->dmc[i].event = 0x6;
+ __raw_writel(((data->dmc[i].event << 12) | 0x1),
+ ppmu_base + 0xfc);
+
+ /* Start PPMU */
+ __raw_writel(0x1, ppmu_base + 0xf000);
+ }
+}
+
+static void exynos4_read_ppmu(struct busfreq_data *data)
+{
+ int i, j;
+
+ for (i = 0; i < 2; i++) {
+ void __iomem *ppmu_base = data->dmc[i].hw_base;
+ u32 overflow;
+
+ /* Stop PPMU */
+ __raw_writel(0x0, ppmu_base + 0xf000);
+
+ /* Update local data from PPMU */
+ overflow = __raw_readl(ppmu_base + 0xf050);
+
+ data->dmc[i].ccnt = __raw_readl(ppmu_base + 0xf100);
+ data->dmc[i].ccnt_overflow = overflow & (1 << 31);
+
+ for (j = 0; j < PPMU_PMNCNT_MAX; j++) {
+ data->dmc[i].count[j] = __raw_readl(
+ ppmu_base + (0xf110 + (0x10 * j)));
+ data->dmc[i].count_overflow[j] = overflow & (1 << j);
+ }
+ }
+
+ busfreq_mon_reset(data);
+}
+
+static int exynos4x12_get_intspec(unsigned long mifclk)
+{
+ int i = 0;
+
+ while (exynos4x12_intclk_table[i].clk) {
+ if (exynos4x12_intclk_table[i].clk <= mifclk)
+ return i;
+ i++;
+ }
+
+ return -EINVAL;
+}
+
+static int exynos4_bus_setvolt(struct busfreq_data *data,
+ struct busfreq_opp_info *oppi,
+ struct busfreq_opp_info *oldoppi)
+{
+ int err = 0, tmp;
+ unsigned long volt = oppi->volt;
+
+ switch (data->type) {
+ case TYPE_BUSF_EXYNOS4210:
+ /* OPP represents DMC clock + INT voltage */
+ err = regulator_set_voltage(data->vdd_int, volt,
+ MAX_SAFEVOLT);
+ break;
+ case TYPE_BUSF_EXYNOS4x12:
+ /* OPP represents MIF clock + MIF voltage */
+ err = regulator_set_voltage(data->vdd_mif, volt,
+ MAX_SAFEVOLT);
+ if (err)
+ break;
+
+ tmp = exynos4x12_get_intspec(oppi->rate);
+ if (tmp < 0) {
+ err = tmp;
+ regulator_set_voltage(data->vdd_mif,
+ oldoppi->volt,
+ MAX_SAFEVOLT);
+ break;
+ }
+ err = regulator_set_voltage(data->vdd_int,
+ exynos4x12_intclk_table[tmp].volt,
+ MAX_SAFEVOLT);
+ /* Try to recover */
+ if (err)
+ regulator_set_voltage(data->vdd_mif,
+ oldoppi->volt,
+ MAX_SAFEVOLT);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
+ u32 flags)
+{
+ int err = 0;
+ struct platform_device *pdev = container_of(dev, struct platform_device,
+ dev);
+ struct busfreq_data *data = platform_get_drvdata(pdev);
+ struct opp *opp;
+ unsigned long freq;
+ unsigned long old_freq = data->curr_oppinfo.rate;
+ struct busfreq_opp_info new_oppinfo;
+
+ rcu_read_lock();
+ opp = devfreq_recommended_opp(dev, _freq, flags);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ return PTR_ERR(opp);
+ }
+ new_oppinfo.rate = opp_get_freq(opp);
+ new_oppinfo.volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+ freq = new_oppinfo.rate;
+
+ if (old_freq == freq)
+ return 0;
+
+ dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt);
+
+ mutex_lock(&data->lock);
+
+ if (data->disabled)
+ goto out;
+
+ if (old_freq < freq)
+ err = exynos4_bus_setvolt(data, &new_oppinfo,
+ &data->curr_oppinfo);
+ if (err)
+ goto out;
+
+ if (old_freq != freq) {
+ switch (data->type) {
+ case TYPE_BUSF_EXYNOS4210:
+ err = exynos4210_set_busclk(data, &new_oppinfo);
+ break;
+ case TYPE_BUSF_EXYNOS4x12:
+ err = exynos4x12_set_busclk(data, &new_oppinfo);
+ break;
+ default:
+ err = -EINVAL;
+ }
+ }
+ if (err)
+ goto out;
+
+ if (old_freq > freq)
+ err = exynos4_bus_setvolt(data, &new_oppinfo,
+ &data->curr_oppinfo);
+ if (err)
+ goto out;
+
+ data->curr_oppinfo = new_oppinfo;
+out:
+ mutex_unlock(&data->lock);
+ return err;
+}
+
+static int exynos4_get_busier_dmc(struct busfreq_data *data)
+{
+ u64 p0 = data->dmc[0].count[0];
+ u64 p1 = data->dmc[1].count[0];
+
+ p0 *= data->dmc[1].ccnt;
+ p1 *= data->dmc[0].ccnt;
+
+ if (data->dmc[1].ccnt == 0)
+ return 0;
+
+ if (p0 > p1)
+ return 0;
+ return 1;
+}
+
+static int exynos4_bus_get_dev_status(struct device *dev,
+ struct devfreq_dev_status *stat)
+{
+ struct busfreq_data *data = dev_get_drvdata(dev);
+ int busier_dmc;
+ int cycles_x2 = 2; /* 2 x cycles */
+ void __iomem *addr;
+ u32 timing;
+ u32 memctrl;
+
+ exynos4_read_ppmu(data);
+ busier_dmc = exynos4_get_busier_dmc(data);
+ stat->current_frequency = data->curr_oppinfo.rate;
+
+ if (busier_dmc)
+ addr = S5P_VA_DMC1;
+ else
+ addr = S5P_VA_DMC0;
+
+ memctrl = __raw_readl(addr + 0x04); /* one of DDR2/3/LPDDR2 */
+ timing = __raw_readl(addr + 0x38); /* CL or WL/RL values */
+
+ switch ((memctrl >> 8) & 0xf) {
+ case 0x4: /* DDR2 */
+ cycles_x2 = ((timing >> 16) & 0xf) * 2;
+ break;
+ case 0x5: /* LPDDR2 */
+ case 0x6: /* DDR3 */
+ cycles_x2 = ((timing >> 8) & 0xf) + ((timing >> 0) & 0xf);
+ break;
+ default:
+ pr_err("%s: Unknown Memory Type(%d).\n", __func__,
+ (memctrl >> 8) & 0xf);
+ return -EINVAL;
+ }
+
+ /* Number of cycles spent on memory access */
+ stat->busy_time = data->dmc[busier_dmc].count[0] / 2 * (cycles_x2 + 2);
+ stat->busy_time *= 100 / BUS_SATURATION_RATIO;
+ stat->total_time = data->dmc[busier_dmc].ccnt;
+
+ /* If the counters have overflown, retry */
+ if (data->dmc[busier_dmc].ccnt_overflow ||
+ data->dmc[busier_dmc].count_overflow[0])
+ return -EAGAIN;
+
+ return 0;
+}
+
+static void exynos4_bus_exit(struct device *dev)
+{
+ struct busfreq_data *data = dev_get_drvdata(dev);
+
+ devfreq_unregister_opp_notifier(dev, data->devfreq);
+}
+
+static struct devfreq_dev_profile exynos4_devfreq_profile = {
+ .initial_freq = 400000,
+ .polling_ms = 50,
+ .target = exynos4_bus_target,
+ .get_dev_status = exynos4_bus_get_dev_status,
+ .exit = exynos4_bus_exit,
+};
+
+static int exynos4210_init_tables(struct busfreq_data *data)
+{
+ u32 tmp;
+ int mgrp;
+ int i, err = 0;
+
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
+ for (i = LV_0; i < EX4210_LV_NUM; i++) {
+ tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
+ EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMC_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCP_MASK |
+ EXYNOS4_CLKDIV_DMC0_COPY2_MASK |
+ EXYNOS4_CLKDIV_DMC0_CORETI_MASK);
+
+ tmp |= ((exynos4210_clkdiv_dmc0[i][0] <<
+ EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
+ (exynos4210_clkdiv_dmc0[i][1] <<
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+ (exynos4210_clkdiv_dmc0[i][2] <<
+ EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
+ (exynos4210_clkdiv_dmc0[i][3] <<
+ EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
+ (exynos4210_clkdiv_dmc0[i][4] <<
+ EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
+ (exynos4210_clkdiv_dmc0[i][5] <<
+ EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) |
+ (exynos4210_clkdiv_dmc0[i][6] <<
+ EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) |
+ (exynos4210_clkdiv_dmc0[i][7] <<
+ EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT));
+
+ data->dmc_divtable[i] = tmp;
+ }
+
+ tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
+ for (i = LV_0; i < EX4210_LV_NUM; i++) {
+ tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
+ EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
+
+ tmp |= ((exynos4210_clkdiv_top[i][0] <<
+ EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) |
+ (exynos4210_clkdiv_top[i][1] <<
+ EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
+ (exynos4210_clkdiv_top[i][2] <<
+ EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
+ (exynos4210_clkdiv_top[i][3] <<
+ EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
+ (exynos4210_clkdiv_top[i][4] <<
+ EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
+
+ data->top_divtable[i] = tmp;
+ }
+
+#ifdef CONFIG_EXYNOS_ASV
+ tmp = exynos4_result_of_asv;
+#else
+ tmp = 0; /* Max voltages for the reliability of the unknown */
+#endif
+
+ pr_debug("ASV Group of Exynos4 is %d\n", tmp);
+ /* Use merged grouping for voltage */
+ switch (tmp) {
+ case 0:
+ mgrp = 0;
+ break;
+ case 1:
+ case 2:
+ mgrp = 1;
+ break;
+ case 3:
+ case 4:
+ mgrp = 2;
+ break;
+ case 5:
+ case 6:
+ mgrp = 3;
+ break;
+ case 7:
+ mgrp = 4;
+ break;
+ default:
+ pr_warn("Unknown ASV Group. Use max voltage.\n");
+ mgrp = 0;
+ }
+
+ for (i = LV_0; i < EX4210_LV_NUM; i++)
+ exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i];
+
+ for (i = LV_0; i < EX4210_LV_NUM; i++) {
+ err = opp_add(data->dev, exynos4210_busclk_table[i].clk,
+ exynos4210_busclk_table[i].volt);
+ if (err) {
+ dev_err(data->dev, "Cannot add opp entries.\n");
+ return err;
+ }
+ }
+
+
+ return 0;
+}
+
+static int exynos4x12_init_tables(struct busfreq_data *data)
+{
+ unsigned int i;
+ unsigned int tmp;
+ int ret;
+
+ /* Enable pause function for DREX2 DVFS */
+ tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL);
+ tmp |= EXYNOS4_DMC_PAUSE_ENABLE;
+ __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL);
+
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
+
+ for (i = 0; i < EX4x12_LV_NUM; i++) {
+ tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
+ EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMC_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCP_MASK);
+
+ tmp |= ((exynos4x12_clkdiv_dmc0[i][0] <<
+ EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
+ (exynos4x12_clkdiv_dmc0[i][1] <<
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+ (exynos4x12_clkdiv_dmc0[i][2] <<
+ EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
+ (exynos4x12_clkdiv_dmc0[i][3] <<
+ EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
+ (exynos4x12_clkdiv_dmc0[i][4] <<
+ EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
+ (exynos4x12_clkdiv_dmc0[i][5] <<
+ EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT));
+
+ data->dmc_divtable[i] = tmp;
+ }
+
+#ifdef CONFIG_EXYNOS_ASV
+ tmp = exynos4_result_of_asv;
+#else
+ tmp = 0; /* Max voltages for the reliability of the unknown */
+#endif
+
+ if (tmp > 8)
+ tmp = 0;
+ pr_debug("ASV Group of Exynos4x12 is %d\n", tmp);
+
+ for (i = 0; i < EX4x12_LV_NUM; i++) {
+ exynos4x12_mifclk_table[i].volt =
+ exynos4x12_mif_step_50[tmp][i];
+ exynos4x12_intclk_table[i].volt =
+ exynos4x12_int_volt[tmp][i];
+ }
+
+ for (i = 0; i < EX4x12_LV_NUM; i++) {
+ ret = opp_add(data->dev, exynos4x12_mifclk_table[i].clk,
+ exynos4x12_mifclk_table[i].volt);
+ if (ret) {
+ dev_err(data->dev, "Fail to add opp entries.\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ struct busfreq_data *data = container_of(this, struct busfreq_data,
+ pm_notifier);
+ struct opp *opp;
+ struct busfreq_opp_info new_oppinfo;
+ unsigned long maxfreq = ULONG_MAX;
+ int err = 0;
+
+ switch (event) {
+ case PM_SUSPEND_PREPARE:
+ /* Set Fastest and Deactivate DVFS */
+ mutex_lock(&data->lock);
+
+ data->disabled = true;
+
+ rcu_read_lock();
+ opp = opp_find_freq_floor(data->dev, &maxfreq);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ dev_err(data->dev, "%s: unable to find a min freq\n",
+ __func__);
+ return PTR_ERR(opp);
+ }
+ new_oppinfo.rate = opp_get_freq(opp);
+ new_oppinfo.volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+
+ err = exynos4_bus_setvolt(data, &new_oppinfo,
+ &data->curr_oppinfo);
+ if (err)
+ goto unlock;
+
+ switch (data->type) {
+ case TYPE_BUSF_EXYNOS4210:
+ err = exynos4210_set_busclk(data, &new_oppinfo);
+ break;
+ case TYPE_BUSF_EXYNOS4x12:
+ err = exynos4x12_set_busclk(data, &new_oppinfo);
+ break;
+ default:
+ err = -EINVAL;
+ }
+ if (err)
+ goto unlock;
+
+ data->curr_oppinfo = new_oppinfo;
+unlock:
+ mutex_unlock(&data->lock);
+ if (err)
+ return err;
+ return NOTIFY_OK;
+ case PM_POST_RESTORE:
+ case PM_POST_SUSPEND:
+ /* Reactivate */
+ mutex_lock(&data->lock);
+ data->disabled = false;
+ mutex_unlock(&data->lock);
+ return NOTIFY_OK;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int exynos4_busfreq_probe(struct platform_device *pdev)
+{
+ struct busfreq_data *data;
+ struct opp *opp;
+ struct device *dev = &pdev->dev;
+ int err = 0;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(dev, "Cannot allocate memory.\n");
+ return -ENOMEM;
+ }
+
+ data->type = pdev->id_entry->driver_data;
+ data->dmc[0].hw_base = S5P_VA_DMC0;
+ data->dmc[1].hw_base = S5P_VA_DMC1;
+ data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event;
+ data->dev = dev;
+ mutex_init(&data->lock);
+
+ switch (data->type) {
+ case TYPE_BUSF_EXYNOS4210:
+ err = exynos4210_init_tables(data);
+ break;
+ case TYPE_BUSF_EXYNOS4x12:
+ err = exynos4x12_init_tables(data);
+ break;
+ default:
+ dev_err(dev, "Cannot determine the device id %d\n", data->type);
+ err = -EINVAL;
+ }
+ if (err)
+ return err;
+
+ data->vdd_int = devm_regulator_get(dev, "vdd_int");
+ if (IS_ERR(data->vdd_int)) {
+ dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
+ return PTR_ERR(data->vdd_int);
+ }
+ if (data->type == TYPE_BUSF_EXYNOS4x12) {
+ data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
+ if (IS_ERR(data->vdd_mif)) {
+ dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n");
+ return PTR_ERR(data->vdd_mif);
+ }
+ }
+
+ rcu_read_lock();
+ opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ dev_err(dev, "Invalid initial frequency %lu kHz.\n",
+ exynos4_devfreq_profile.initial_freq);
+ return PTR_ERR(opp);
+ }
+ data->curr_oppinfo.rate = opp_get_freq(opp);
+ data->curr_oppinfo.volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+
+ platform_set_drvdata(pdev, data);
+
+ busfreq_mon_reset(data);
+
+ data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
+ "simple_ondemand", NULL);
+ if (IS_ERR(data->devfreq))
+ return PTR_ERR(data->devfreq);
+
+ devfreq_register_opp_notifier(dev, data->devfreq);
+
+ err = register_pm_notifier(&data->pm_notifier);
+ if (err) {
+ dev_err(dev, "Failed to setup pm notifier\n");
+ devfreq_remove_device(data->devfreq);
+ return err;
+ }
+
+ return 0;
+}
+
+static int exynos4_busfreq_remove(struct platform_device *pdev)
+{
+ struct busfreq_data *data = platform_get_drvdata(pdev);
+
+ unregister_pm_notifier(&data->pm_notifier);
+ devfreq_remove_device(data->devfreq);
+
+ return 0;
+}
+
+static int exynos4_busfreq_resume(struct device *dev)
+{
+ struct busfreq_data *data = dev_get_drvdata(dev);
+
+ busfreq_mon_reset(data);
+ return 0;
+}
+
+static const struct dev_pm_ops exynos4_busfreq_pm = {
+ .resume = exynos4_busfreq_resume,
+};
+
+static const struct platform_device_id exynos4_busfreq_id[] = {
+ { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 },
+ { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 },
+ { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 },
+ { },
+};
+
+static struct platform_driver exynos4_busfreq_driver = {
+ .probe = exynos4_busfreq_probe,
+ .remove = exynos4_busfreq_remove,
+ .id_table = exynos4_busfreq_id,
+ .driver = {
+ .name = "exynos4-busfreq",
+ .owner = THIS_MODULE,
+ .pm = &exynos4_busfreq_pm,
+ },
+};
+
+static int __init exynos4_busfreq_init(void)
+{
+ return platform_driver_register(&exynos4_busfreq_driver);
+}
+late_initcall(exynos4_busfreq_init);
+
+static void __exit exynos4_busfreq_exit(void)
+{
+ platform_driver_unregister(&exynos4_busfreq_driver);
+}
+module_exit(exynos4_busfreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");