| config SND_OMAP_SOC |
| tristate "SoC Audio for the Texas Instruments OMAP chips" |
| depends on ARCH_OMAP |
| |
| config SND_OMAP_SOC_DMIC |
| tristate |
| |
| config SND_OMAP_SOC_MCBSP |
| tristate |
| |
| config SND_OMAP_SOC_MCPDM |
| tristate |
| |
| config SND_OMAP_SOC_HDMI |
| tristate |
| |
| config SND_OMAP_SOC_N810 |
| tristate "SoC Audio support for Nokia N810" |
| depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C |
| depends on OMAP_MUX |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TLV320AIC3X |
| help |
| Say Y if you want to add support for SoC audio on Nokia N810. |
| |
| config SND_OMAP_SOC_RX51 |
| tristate "SoC Audio support for Nokia RX-51" |
| depends on SND_OMAP_SOC && MACH_NOKIA_RX51 |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TLV320AIC3X |
| select SND_SOC_TPA6130A2 |
| help |
| Say Y if you want to add support for SoC audio on Nokia RX-51 |
| hardware. This is also known as Nokia N900 product. |
| |
| config SND_OMAP_SOC_AMS_DELTA |
| tristate "SoC Audio support for Amstrad E3 (Delta) videophone" |
| depends on SND_OMAP_SOC && MACH_AMS_DELTA |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_CX20442 |
| help |
| Say Y if you want to add support for SoC audio device connected to |
| a handset and a speakerphone found on Amstrad E3 (Delta) videophone. |
| |
| Note that in order to get those devices fully supported, you have to |
| build the kernel with standard serial port driver included and |
| configured for at least 4 ports. Then, from userspace, you must load |
| a line discipline #19 on the modem (ttyS3) serial line. The simplest |
| way to achieve this is to install util-linux-ng and use the included |
| ldattach utility. This can be started automatically from udev, |
| a simple rule like this one should do the trick (it does for me): |
| ACTION=="add", KERNEL=="controlC0", \ |
| RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" |
| |
| config SND_OMAP_SOC_OSK5912 |
| tristate "SoC Audio support for omap osk5912" |
| depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TLV320AIC23 |
| help |
| Say Y if you want to add support for SoC audio on osk5912. |
| |
| config SND_OMAP_SOC_OVERO |
| tristate "SoC Audio support for Gumstix Overo and CompuLab CM-T35" |
| depends on TWL4030_CORE && SND_OMAP_SOC && (MACH_OVERO || MACH_CM_T35) |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TWL4030 |
| help |
| Say Y if you want to add support for SoC audio on the |
| Gumstix Overo or CompuLab CM-T35 |
| |
| config SND_OMAP_SOC_OMAP3EVM |
| tristate "SoC Audio support for OMAP3EVM board" |
| depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TWL4030 |
| help |
| Say Y if you want to add support for SoC audio on the omap3evm board. |
| |
| config SND_OMAP_SOC_AM3517EVM |
| tristate "SoC Audio support for OMAP3517 / AM3517 EVM" |
| depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TLV320AIC23 |
| help |
| Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517 |
| EVM. |
| |
| config SND_OMAP_SOC_SDP3430 |
| tristate "SoC Audio support for Texas Instruments SDP3430" |
| depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TWL4030 |
| help |
| Say Y if you want to add support for SoC audio on Texas Instruments |
| SDP3430. |
| |
| config SND_OMAP_SOC_OMAP_ABE_TWL6040 |
| tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" |
| depends on TWL6040_CORE && SND_OMAP_SOC && ARCH_OMAP4 |
| select SND_OMAP_SOC_DMIC |
| select SND_OMAP_SOC_MCPDM |
| select SND_SOC_TWL6040 |
| select SND_SOC_DMIC |
| help |
| Say Y if you want to add support for SoC audio on OMAP boards using |
| ABE and twl6040 codec. This driver currently supports: |
| - SDP4430/Blaze boards |
| - PandaBoard (4430) |
| - PandaBoardES (4460) |
| |
| config SND_OMAP_SOC_OMAP4_HDMI |
| tristate "SoC Audio support for Texas Instruments OMAP4 HDMI" |
| depends on SND_OMAP_SOC && OMAP4_DSS_HDMI && OMAP2_DSS && ARCH_OMAP4 |
| select SND_OMAP_SOC_HDMI |
| select SND_SOC_OMAP_HDMI_CODEC |
| help |
| Say Y if you want to add support for SoC HDMI audio on Texas Instruments |
| OMAP4 chips |
| |
| config SND_OMAP_SOC_OMAP3_PANDORA |
| tristate "SoC Audio support for OMAP3 Pandora" |
| depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TWL4030 |
| help |
| Say Y if you want to add support for SoC audio on the OMAP3 Pandora. |
| |
| config SND_OMAP_SOC_OMAP3_BEAGLE |
| tristate "SoC Audio support for OMAP3 Beagle and Devkit8000" |
| depends on TWL4030_CORE && SND_OMAP_SOC |
| depends on (MACH_OMAP3_BEAGLE || MACH_DEVKIT8000) |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TWL4030 |
| help |
| Say Y if you want to add support for SoC audio on the Beagleboard or |
| the clone Devkit8000. |
| |
| config SND_OMAP_SOC_ZOOM2 |
| tristate "SoC Audio support for Zoom2" |
| depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2 |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TWL4030 |
| help |
| Say Y if you want to add support for Soc audio on Zoom2 board. |
| |
| config SND_OMAP_SOC_IGEP0020 |
| tristate "SoC Audio support for IGEP v2" |
| depends on TWL4030_CORE && SND_OMAP_SOC && MACH_IGEP0020 |
| select SND_OMAP_SOC_MCBSP |
| select SND_SOC_TWL4030 |
| help |
| Say Y if you want to add support for Soc audio on IGEP v2 board. |