ARM: orion5x: Refactor mpp code to use common orion platform mpp.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index a5930f8..e43b39c 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -339,28 +339,28 @@
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Raid mode (bit 0) */
- { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
- { 2, MPP_GPIO }, /* Raid mode (bit 1) */
- { 3, MPP_GPIO }, /* Board ID (bit 0) */
- { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */
- { 5, MPP_GPIO }, /* Fan fail detection */
- { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */
- { 7, MPP_GPIO }, /* Disable initial blinking on front LED */
- { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
- { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
- { 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */
- { 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */
- { 12, MPP_GPIO }, /* Board ID (bit 1) */
- { 13, MPP_GPIO }, /* SATA 1 blue LED blink control */
- { 14, MPP_SATA_LED },
- { 15, MPP_SATA_LED },
- { 16, MPP_GPIO }, /* Blue front LED control */
- { 17, MPP_GPIO }, /* SATA 0 blue LED blink control */
- { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
- { 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */
- { -1 }
+static unsigned int net2big_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Raid mode (bit 0) */
+ MPP1_GPIO, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
+ MPP2_GPIO, /* Raid mode (bit 1) */
+ MPP3_GPIO, /* Board ID (bit 0) */
+ MPP4_GPIO, /* Fan activity (0 = Off, 1 = On) */
+ MPP5_GPIO, /* Fan fail detection */
+ MPP6_GPIO, /* Red front LED (0 = Off, 1 = On) */
+ MPP7_GPIO, /* Disable initial blinking on front LED */
+ MPP8_GPIO, /* Rear power switch (on|auto) */
+ MPP9_GPIO, /* Rear power switch (auto|off) */
+ MPP10_GPIO, /* SATA 1 red LED (0 = Off, 1 = On) */
+ MPP11_GPIO, /* SATA 0 red LED (0 = Off, 1 = On) */
+ MPP12_GPIO, /* Board ID (bit 1) */
+ MPP13_GPIO, /* SATA 1 blue LED blink control */
+ MPP14_SATA_LED,
+ MPP15_SATA_LED,
+ MPP16_GPIO, /* Blue front LED control */
+ MPP17_GPIO, /* SATA 0 blue LED blink control */
+ MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */
+ MPP19_GPIO, /* SATA{0,1} power On/Off request */
+ 0,
/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
/* 23: SATA 0 power status */
/* 24: Board power off */