| /* |
| * SAMSUNG SMDK5410 board device tree source |
| * |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| #include "exynos5410.dtsi" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| / { |
| model = "Samsung SMDK5410 board based on EXYNOS5410"; |
| compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x40000000 0x80000000>; |
| }; |
| |
| chosen { |
| bootargs = "console=ttySAC2,115200"; |
| }; |
| |
| fin_pll: xxti { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "fin_pll"; |
| #clock-cells = <0>; |
| }; |
| |
| firmware@02037000 { |
| compatible = "samsung,secure-firmware"; |
| reg = <0x02037000 0x1000>; |
| }; |
| |
| }; |
| |
| &mmc_0 { |
| status = "okay"; |
| num-slots = <1>; |
| cap-mmc-highspeed; |
| broken-cd; |
| card-detect-delay = <200>; |
| samsung,dw-mshc-ciu-div = <3>; |
| samsung,dw-mshc-sdr-timing = <2 3>; |
| samsung,dw-mshc-ddr-timing = <1 2>; |
| bus-width = <8>; |
| }; |
| |
| &mmc_2 { |
| status = "okay"; |
| num-slots = <1>; |
| cap-sd-highspeed; |
| card-detect-delay = <200>; |
| samsung,dw-mshc-ciu-div = <3>; |
| samsung,dw-mshc-sdr-timing = <2 3>; |
| samsung,dw-mshc-ddr-timing = <1 2>; |
| bus-width = <4>; |
| disable-wp; |
| }; |
| |
| &pinctrl_0 { |
| srom_ctl: srom-ctl { |
| samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5", |
| "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| srom_ebi: srom-ebi { |
| samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3", |
| "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7", |
| "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3", |
| "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7", |
| "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3", |
| "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &sromc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&srom_ctl>, <&srom_ebi>; |
| |
| ethernet@3,0 { |
| compatible = "smsc,lan9115"; |
| reg = <3 0 0x10000>; |
| phy-mode = "mii"; |
| interrupt-parent = <&gpx0>; |
| interrupts = <5 IRQ_TYPE_LEVEL_LOW>; |
| reg-io-width = <2>; |
| smsc,irq-push-pull; |
| smsc,force-internal-phy; |
| |
| samsung,srom-page-mode; |
| samsung,srom-timing = <9 12 1 9 1 1>; |
| }; |
| }; |
| |
| &serial_0 { |
| status = "okay"; |
| }; |
| |
| &serial_1 { |
| status = "okay"; |
| }; |
| |
| &serial_2 { |
| status = "okay"; |
| }; |