arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi - kernel/msm-4.19 - Gitiles

 /*
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
  * Copyright (C) 2016-2017, Freescale Semiconductor
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This library is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This library is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include <dt-bindings/thermal/thermal.h>

 / {
 	compatible = "fsl,ls2080a";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;

 	cpu: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};

 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x80000000>;
 		      /* DRAM space - 1, size : 2 GB DRAM */
 	};

 	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "sysclk";
 	};

 	gic: interrupt-controller@6000000 {
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
 			<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
 			<0x0 0x0c0c0000 0 0x2000>, /* GICC */
 			<0x0 0x0c0d0000 0 0x1000>, /* GICH */
 			<0x0 0x0c0e0000 0 0x20000>; /* GICV */
 		#interrupt-cells = <3>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 		interrupt-controller;
 		interrupts = <1 9 0x4>;

 		its: gic-its@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0x6020000 0 0x20000>;
 		};
 	};

 	rstcr: syscon@1e60000 {
 		compatible = "fsl,ls2080a-rstcr", "syscon";
 		reg = <0x0 0x1e60000 0x0 0x4>;
 	};

 	reboot {
 		compatible ="syscon-reboot";
 		regmap = <&rstcr>;
 		offset = <0x0>;
 		mask = <0x2>;
 	};

 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
 			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
 			     <1 11 4>, /* Virtual PPI, active-low */
 			     <1 10 4>; /* Hypervisor PPI, active-low */
 		fsl,erratum-a008585;
 	};

 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
 	};

 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		clockgen: clocking@1300000 {
 			compatible = "fsl,ls2080a-clockgen";
 			reg = <0 0x1300000 0 0xa0000>;
 			#clock-cells = <2>;
 			clocks = <&sysclk>;
 		};

 		dcfg: dcfg@1e00000 {
 			compatible = "fsl,ls2080a-dcfg", "syscon";
 			reg = <0x0 0x1e00000 0x0 0x10000>;
 			little-endian;
 		};

 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
 			fsl,tmu-calibration = <0x00000000 0x00000026
 					       0x00000001 0x0000002d
 					       0x00000002 0x00000032
 					       0x00000003 0x00000039
 					       0x00000004 0x0000003f
 					       0x00000005 0x00000046
 					       0x00000006 0x0000004d
 					       0x00000007 0x00000054
 					       0x00000008 0x0000005a
 					       0x00000009 0x00000061
 					       0x0000000a 0x0000006a
 					       0x0000000b 0x00000071

 					       0x00010000 0x00000025
 					       0x00010001 0x0000002c
 					       0x00010002 0x00000035
 					       0x00010003 0x0000003d
 					       0x00010004 0x00000045
 					       0x00010005 0x0000004e
 					       0x00010006 0x00000057
 					       0x00010007 0x00000061
 					       0x00010008 0x0000006b
 					       0x00010009 0x00000076

 					       0x00020000 0x00000029
 					       0x00020001 0x00000033
 					       0x00020002 0x0000003d
 					       0x00020003 0x00000049
 					       0x00020004 0x00000056
 					       0x00020005 0x00000061
 					       0x00020006 0x0000006d

 					       0x00030000 0x00000021
 					       0x00030001 0x0000002a
 					       0x00030002 0x0000003c
 					       0x00030003 0x0000004e>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};

 		thermal-zones {
 			cpu_thermal: cpu-thermal {
 				polling-delay-passive = <1000>;
 				polling-delay = <5000>;

 				thermal-sensors = <&tmu 4>;

 				trips {
 					cpu_alert: cpu-alert {
 						temperature = <75000>;
 						hysteresis = <2000>;
 						type = "passive";
 					};
 					cpu_crit: cpu-crit {
 						temperature = <85000>;
 						hysteresis = <2000>;
 						type = "critical";
 					};
 				};

 				cooling-maps {
 					map0 {
 						trip = <&cpu_alert>;
 						cooling-device =
 							<&cpu0 THERMAL_NO_LIMIT
 							THERMAL_NO_LIMIT>;
 					};
 					map1 {
 						trip = <&cpu_alert>;
 						cooling-device =
 							<&cpu2 THERMAL_NO_LIMIT
 							THERMAL_NO_LIMIT>;
 					};
 					map2 {
 						trip = <&cpu_alert>;
 						cooling-device =
 							<&cpu4 THERMAL_NO_LIMIT
 							THERMAL_NO_LIMIT>;
 					};
 					map3 {
 						trip = <&cpu_alert>;
 						cooling-device =
 							<&cpu6 THERMAL_NO_LIMIT
 							THERMAL_NO_LIMIT>;
 					};
 				};
 			};
 		};

 		serial0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen 4 3>;
 			interrupts = <0 32 0x4>; /* Level high type */
 		};

 		serial1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen 4 3>;
 			interrupts = <0 32 0x4>; /* Level high type */
 		};

 		cluster1_core0_watchdog: wdt@c000000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};

 		cluster1_core1_watchdog: wdt@c010000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};

 		cluster2_core0_watchdog: wdt@c100000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};

 		cluster2_core1_watchdog: wdt@c110000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};

 		cluster3_core0_watchdog: wdt@c200000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc200000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};

 		cluster3_core1_watchdog: wdt@c210000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc210000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};

 		cluster4_core0_watchdog: wdt@c300000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc300000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};

 		cluster4_core1_watchdog: wdt@c310000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc310000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};

 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
 			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
 			msi-parent = <&its>;
 			#address-cells = <3>;
 			#size-cells = <1>;

 			/*
 			 * Region type 0x0 - MC portals
 			 * Region type 0x1 - QBMAN portals
 			 */
 			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
 				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;

 			/*
 			 * Define the maximum number of MACs present on the SoC.
 			 */
 			dpmacs {
 				#address-cells = <1>;
 				#size-cells = <0>;

 				dpmac1: dpmac@1 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x1>;
 				};

 				dpmac2: dpmac@2 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x2>;
 				};

 				dpmac3: dpmac@3 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x3>;
 				};

 				dpmac4: dpmac@4 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x4>;
 				};

 				dpmac5: dpmac@5 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x5>;
 				};

 				dpmac6: dpmac@6 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x6>;
 				};

 				dpmac7: dpmac@7 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x7>;
 				};

 				dpmac8: dpmac@8 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x8>;
 				};

 				dpmac9: dpmac@9 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x9>;
 				};

 				dpmac10: dpmac@a {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0xa>;
 				};

 				dpmac11: dpmac@b {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0xb>;
 				};

 				dpmac12: dpmac@c {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0xc>;
 				};

 				dpmac13: dpmac@d {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0xd>;
 				};

 				dpmac14: dpmac@e {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0xe>;
 				};

 				dpmac15: dpmac@f {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0xf>;
 				};

 				dpmac16: dpmac@10 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0x10>;
 				};
 			};
 		};

 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
 			#global-interrupts = <12>;
 			interrupts = <0 13 4>, /* global secure fault */
 				     <0 14 4>, /* combined secure interrupt */
 				     <0 15 4>, /* global non-secure fault */
 				     <0 16 4>, /* combined non-secure interrupt */
 				/* performance counter interrupts 0-7 */
 				     <0 211 4>, <0 212 4>,
 				     <0 213 4>, <0 214 4>,
 				     <0 215 4>, <0 216 4>,
 				     <0 217 4>, <0 218 4>,
 				/* per context interrupt, 64 interrupts */
 				     <0 146 4>, <0 147 4>,
 				     <0 148 4>, <0 149 4>,
 				     <0 150 4>, <0 151 4>,
 				     <0 152 4>, <0 153 4>,
 				     <0 154 4>, <0 155 4>,
 				     <0 156 4>, <0 157 4>,
 				     <0 158 4>, <0 159 4>,
 				     <0 160 4>, <0 161 4>,
 				     <0 162 4>, <0 163 4>,
 				     <0 164 4>, <0 165 4>,
 				     <0 166 4>, <0 167 4>,
 				     <0 168 4>, <0 169 4>,
 				     <0 170 4>, <0 171 4>,
 				     <0 172 4>, <0 173 4>,
 				     <0 174 4>, <0 175 4>,
 				     <0 176 4>, <0 177 4>,
 				     <0 178 4>, <0 179 4>,
 				     <0 180 4>, <0 181 4>,
 				     <0 182 4>, <0 183 4>,
 				     <0 184 4>, <0 185 4>,
 				     <0 186 4>, <0 187 4>,
 				     <0 188 4>, <0 189 4>,
 				     <0 190 4>, <0 191 4>,
 				     <0 192 4>, <0 193 4>,
 				     <0 194 4>, <0 195 4>,
 				     <0 196 4>, <0 197 4>,
 				     <0 198 4>, <0 199 4>,
 				     <0 200 4>, <0 201 4>,
 				     <0 202 4>, <0 203 4>,
 				     <0 204 4>, <0 205 4>,
 				     <0 206 4>, <0 207 4>,
 				     <0 208 4>, <0 209 4>;
 			mmu-masters = <&fsl_mc 0x300 0>;
 		};

 		dspi: dspi@2100000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
 			interrupts = <0 26 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
 			bus-num = <0>;
 		};

 		esdhc: esdhc@2140000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
 			interrupts = <0 28 0x4>; /* Level high type */
 			clock-frequency = <0>;	/* Updated by bootloader */
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			little-endian;
 			bus-width = <4>;
 		};

 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <0 36 0x4>; /* Level high type */
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};

 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <0 36 0x4>; /* Level high type */
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};

 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <0 37 0x4>; /* Level high type */
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};

 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <0 37 0x4>; /* Level high type */
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};

 		i2c0: i2c@2000000 {
 			status = "disabled";
 			compatible = "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <0 34 0x4>; /* Level high type */
 			clock-names = "i2c";
 			clocks = <&clockgen 4 3>;
 		};

 		i2c1: i2c@2010000 {
 			status = "disabled";
 			compatible = "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <0 34 0x4>; /* Level high type */
 			clock-names = "i2c";
 			clocks = <&clockgen 4 3>;
 		};

 		i2c2: i2c@2020000 {
 			status = "disabled";
 			compatible = "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <0 35 0x4>; /* Level high type */
 			clock-names = "i2c";
 			clocks = <&clockgen 4 3>;
 		};

 		i2c3: i2c@2030000 {
 			status = "disabled";
 			compatible = "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <0 35 0x4>; /* Level high type */
 			clock-names = "i2c";
 			clocks = <&clockgen 4 3>;
 		};

 		ifc: ifc@2240000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x2240000 0x0 0x20000>;
 			interrupts = <0 21 0x4>; /* Level high type */
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;

 			ranges = <0 0 0x5 0x80000000 0x08000000
 				  2 0 0x5 0x30000000 0x00010000
 				  3 0 0x5 0x20000000 0x00010000>;
 		};

 		qspi: quadspi@20c0000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x20c0000 0x0 0x10000>,
 			      <0x0 0x20000000 0x0 0x10000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
 			interrupts = <0 25 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "qspi_en", "qspi";
 		};

 		pcie1: pcie@3400000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
 				     "snps,dw-pcie";
 			reg-names = "regs", "config";
 			interrupts = <0 108 0x4>; /* Level high type */
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			msi-parent = <&its>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
 					<0000 0 0 2 &gic 0 0 0 110 4>,
 					<0000 0 0 3 &gic 0 0 0 111 4>,
 					<0000 0 0 4 &gic 0 0 0 112 4>;
 		};

 		pcie2: pcie@3500000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
 				     "snps,dw-pcie";
 			reg-names = "regs", "config";
 			interrupts = <0 113 0x4>; /* Level high type */
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			msi-parent = <&its>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
 					<0000 0 0 2 &gic 0 0 0 115 4>,
 					<0000 0 0 3 &gic 0 0 0 116 4>,
 					<0000 0 0 4 &gic 0 0 0 117 4>;
 		};

 		pcie3: pcie@3600000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
 				     "snps,dw-pcie";
 			reg-names = "regs", "config";
 			interrupts = <0 118 0x4>; /* Level high type */
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
 			num-lanes = <8>;
 			bus-range = <0x0 0xff>;
 			msi-parent = <&its>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
 					<0000 0 0 2 &gic 0 0 0 120 4>,
 					<0000 0 0 3 &gic 0 0 0 121 4>,
 					<0000 0 0 4 &gic 0 0 0 122 4>;
 		};

 		pcie4: pcie@3700000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
 				     "snps,dw-pcie";
 			reg-names = "regs", "config";
 			interrupts = <0 123 0x4>; /* Level high type */
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			msi-parent = <&its>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
 					<0000 0 0 2 &gic 0 0 0 125 4>,
 					<0000 0 0 3 &gic 0 0 0 126 4>,
 					<0000 0 0 4 &gic 0 0 0 127 4>;
 		};

 		sata0: sata@3200000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
 			interrupts = <0 133 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
 			dma-coherent;
 		};

 		sata1: sata@3210000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3210000 0x0 0x10000>;
 			interrupts = <0 136 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
 			dma-coherent;
 		};

 		usb0: usb3@3100000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <0 80 0x4>; /* Level high type */
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 		};

 		usb1: usb3@3110000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <0 81 0x4>; /* Level high type */
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 		};

 		ccn@4000000 {
 			compatible = "arm,ccn-504";
 			reg = <0x0 0x04000000 0x0 0x01000000>;
 			interrupts = <0 12 4>;
 		};
 	};

 	ddr1: memory-controller@1080000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1080000 0x0 0x1000>;
 		interrupts = <0 17 0x4>;
 		little-endian;
 	};

 	ddr2: memory-controller@1090000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1090000 0x0 0x1000>;
 		interrupts = <0 18 0x4>;
 		little-endian;
 	};
 };
	/*
	* Device Tree Include file for Freescale Layerscape-2080A family SoC.
	*
	* Copyright (C) 2016-2017, Freescale Semiconductor
	*
	* Abhimanyu Saini <abhimanyu.saini@nxp.com>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPLv2 or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This library is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This library is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include <dt-bindings/thermal/thermal.h>

	/ {
	compatible = "fsl,ls2080a";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	cpu: cpus {
	#address-cells = <1>;
	#size-cells = <0>;
	};

	memory@80000000 {
	device_type = "memory";
	reg = <0x00000000 0x80000000 0 0x80000000>;
	/* DRAM space - 1, size : 2 GB DRAM */
	};

	sysclk: sysclk {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <100000000>;
	clock-output-names = "sysclk";
	};

	gic: interrupt-controller@6000000 {
	compatible = "arm,gic-v3";
	reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
	<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
	<0x0 0x0c0c0000 0 0x2000>, /* GICC */
	<0x0 0x0c0d0000 0 0x1000>, /* GICH */
	<0x0 0x0c0e0000 0 0x20000>; /* GICV */
	#interrupt-cells = <3>;
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;
	interrupt-controller;
	interrupts = <1 9 0x4>;

	its: gic-its@6020000 {
	compatible = "arm,gic-v3-its";
	msi-controller;
	reg = <0x0 0x6020000 0 0x20000>;
	};
	};

	rstcr: syscon@1e60000 {
	compatible = "fsl,ls2080a-rstcr", "syscon";
	reg = <0x0 0x1e60000 0x0 0x4>;
	};

	reboot {
	compatible ="syscon-reboot";
	regmap = <&rstcr>;
	offset = <0x0>;
	mask = <0x2>;
	};

	timer {
	compatible = "arm,armv8-timer";
	interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
	<1 14 4>, /* Physical Non-Secure PPI, active-low */
	<1 11 4>, /* Virtual PPI, active-low */
	<1 10 4>; /* Hypervisor PPI, active-low */
	fsl,erratum-a008585;
	};

	pmu {
	compatible = "arm,armv8-pmuv3";
	interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
	};

	soc {
	compatible = "simple-bus";
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	clockgen: clocking@1300000 {
	compatible = "fsl,ls2080a-clockgen";
	reg = <0 0x1300000 0 0xa0000>;
	#clock-cells = <2>;
	clocks = <&sysclk>;
	};

	dcfg: dcfg@1e00000 {
	compatible = "fsl,ls2080a-dcfg", "syscon";
	reg = <0x0 0x1e00000 0x0 0x10000>;
	little-endian;
	};

	tmu: tmu@1f80000 {
	compatible = "fsl,qoriq-tmu";
	reg = <0x0 0x1f80000 0x0 0x10000>;
	interrupts = <0 23 0x4>;
	fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
	fsl,tmu-calibration = <0x00000000 0x00000026
	0x00000001 0x0000002d
	0x00000002 0x00000032
	0x00000003 0x00000039
	0x00000004 0x0000003f
	0x00000005 0x00000046
	0x00000006 0x0000004d
	0x00000007 0x00000054
	0x00000008 0x0000005a
	0x00000009 0x00000061
	0x0000000a 0x0000006a
	0x0000000b 0x00000071

	0x00010000 0x00000025
	0x00010001 0x0000002c
	0x00010002 0x00000035
	0x00010003 0x0000003d
	0x00010004 0x00000045
	0x00010005 0x0000004e
	0x00010006 0x00000057
	0x00010007 0x00000061
	0x00010008 0x0000006b
	0x00010009 0x00000076

	0x00020000 0x00000029
	0x00020001 0x00000033
	0x00020002 0x0000003d
	0x00020003 0x00000049
	0x00020004 0x00000056
	0x00020005 0x00000061
	0x00020006 0x0000006d

	0x00030000 0x00000021
	0x00030001 0x0000002a
	0x00030002 0x0000003c
	0x00030003 0x0000004e>;
	little-endian;
	#thermal-sensor-cells = <1>;
	};

	thermal-zones {
	cpu_thermal: cpu-thermal {
	polling-delay-passive = <1000>;
	polling-delay = <5000>;

	thermal-sensors = <&tmu 4>;

	trips {
	cpu_alert: cpu-alert {
	temperature = <75000>;
	hysteresis = <2000>;
	type = "passive";
	};
	cpu_crit: cpu-crit {
	temperature = <85000>;
	hysteresis = <2000>;
	type = "critical";
	};
	};

	cooling-maps {
	map0 {
	trip = <&cpu_alert>;
	cooling-device =
	<&cpu0 THERMAL_NO_LIMIT
	THERMAL_NO_LIMIT>;
	};
	map1 {
	trip = <&cpu_alert>;
	cooling-device =
	<&cpu2 THERMAL_NO_LIMIT
	THERMAL_NO_LIMIT>;
	};
	map2 {
	trip = <&cpu_alert>;
	cooling-device =
	<&cpu4 THERMAL_NO_LIMIT
	THERMAL_NO_LIMIT>;
	};
	map3 {
	trip = <&cpu_alert>;
	cooling-device =
	<&cpu6 THERMAL_NO_LIMIT
	THERMAL_NO_LIMIT>;
	};
	};
	};
	};

	serial0: serial@21c0500 {
	compatible = "fsl,ns16550", "ns16550a";
	reg = <0x0 0x21c0500 0x0 0x100>;
	clocks = <&clockgen 4 3>;
	interrupts = <0 32 0x4>; /* Level high type */
	};

	serial1: serial@21c0600 {
	compatible = "fsl,ns16550", "ns16550a";
	reg = <0x0 0x21c0600 0x0 0x100>;
	clocks = <&clockgen 4 3>;
	interrupts = <0 32 0x4>; /* Level high type */
	};

	cluster1_core0_watchdog: wdt@c000000 {
	compatible = "arm,sp805-wdt", "arm,primecell";
	reg = <0x0 0xc000000 0x0 0x1000>;
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "apb_pclk", "wdog_clk";
	};

	cluster1_core1_watchdog: wdt@c010000 {
	compatible = "arm,sp805-wdt", "arm,primecell";
	reg = <0x0 0xc010000 0x0 0x1000>;
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "apb_pclk", "wdog_clk";
	};

	cluster2_core0_watchdog: wdt@c100000 {
	compatible = "arm,sp805-wdt", "arm,primecell";
	reg = <0x0 0xc100000 0x0 0x1000>;
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "apb_pclk", "wdog_clk";
	};

	cluster2_core1_watchdog: wdt@c110000 {
	compatible = "arm,sp805-wdt", "arm,primecell";
	reg = <0x0 0xc110000 0x0 0x1000>;
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "apb_pclk", "wdog_clk";
	};

	cluster3_core0_watchdog: wdt@c200000 {
	compatible = "arm,sp805-wdt", "arm,primecell";
	reg = <0x0 0xc200000 0x0 0x1000>;
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "apb_pclk", "wdog_clk";
	};

	cluster3_core1_watchdog: wdt@c210000 {
	compatible = "arm,sp805-wdt", "arm,primecell";
	reg = <0x0 0xc210000 0x0 0x1000>;
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "apb_pclk", "wdog_clk";
	};

	cluster4_core0_watchdog: wdt@c300000 {
	compatible = "arm,sp805-wdt", "arm,primecell";
	reg = <0x0 0xc300000 0x0 0x1000>;
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "apb_pclk", "wdog_clk";
	};

	cluster4_core1_watchdog: wdt@c310000 {
	compatible = "arm,sp805-wdt", "arm,primecell";
	reg = <0x0 0xc310000 0x0 0x1000>;
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "apb_pclk", "wdog_clk";
	};

	fsl_mc: fsl-mc@80c000000 {
	compatible = "fsl,qoriq-mc";
	reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
	<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
	msi-parent = <&its>;
	#address-cells = <3>;
	#size-cells = <1>;

	/*
	* Region type 0x0 - MC portals
	* Region type 0x1 - QBMAN portals
	*/
	ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
	0x1 0x0 0x0 0x8 0x18000000 0x8000000>;

	/*
	* Define the maximum number of MACs present on the SoC.
	*/
	dpmacs {
	#address-cells = <1>;
	#size-cells = <0>;

	dpmac1: dpmac@1 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x1>;
	};

	dpmac2: dpmac@2 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x2>;
	};

	dpmac3: dpmac@3 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x3>;
	};

	dpmac4: dpmac@4 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x4>;
	};

	dpmac5: dpmac@5 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x5>;
	};

	dpmac6: dpmac@6 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x6>;
	};

	dpmac7: dpmac@7 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x7>;
	};

	dpmac8: dpmac@8 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x8>;
	};

	dpmac9: dpmac@9 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x9>;
	};

	dpmac10: dpmac@a {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0xa>;
	};

	dpmac11: dpmac@b {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0xb>;
	};

	dpmac12: dpmac@c {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0xc>;
	};

	dpmac13: dpmac@d {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0xd>;
	};

	dpmac14: dpmac@e {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0xe>;
	};

	dpmac15: dpmac@f {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0xf>;
	};

	dpmac16: dpmac@10 {
	compatible = "fsl,qoriq-mc-dpmac";
	reg = <0x10>;
	};
	};
	};

	smmu: iommu@5000000 {
	compatible = "arm,mmu-500";
	reg = <0 0x5000000 0 0x800000>;
	#global-interrupts = <12>;
	interrupts = <0 13 4>, /* global secure fault */
	<0 14 4>, /* combined secure interrupt */
	<0 15 4>, /* global non-secure fault */
	<0 16 4>, /* combined non-secure interrupt */
	/* performance counter interrupts 0-7 */
	<0 211 4>, <0 212 4>,
	<0 213 4>, <0 214 4>,
	<0 215 4>, <0 216 4>,
	<0 217 4>, <0 218 4>,
	/* per context interrupt, 64 interrupts */
	<0 146 4>, <0 147 4>,
	<0 148 4>, <0 149 4>,
	<0 150 4>, <0 151 4>,
	<0 152 4>, <0 153 4>,
	<0 154 4>, <0 155 4>,
	<0 156 4>, <0 157 4>,
	<0 158 4>, <0 159 4>,
	<0 160 4>, <0 161 4>,
	<0 162 4>, <0 163 4>,
	<0 164 4>, <0 165 4>,
	<0 166 4>, <0 167 4>,
	<0 168 4>, <0 169 4>,
	<0 170 4>, <0 171 4>,
	<0 172 4>, <0 173 4>,
	<0 174 4>, <0 175 4>,
	<0 176 4>, <0 177 4>,
	<0 178 4>, <0 179 4>,
	<0 180 4>, <0 181 4>,
	<0 182 4>, <0 183 4>,
	<0 184 4>, <0 185 4>,
	<0 186 4>, <0 187 4>,
	<0 188 4>, <0 189 4>,
	<0 190 4>, <0 191 4>,
	<0 192 4>, <0 193 4>,
	<0 194 4>, <0 195 4>,
	<0 196 4>, <0 197 4>,
	<0 198 4>, <0 199 4>,
	<0 200 4>, <0 201 4>,
	<0 202 4>, <0 203 4>,
	<0 204 4>, <0 205 4>,
	<0 206 4>, <0 207 4>,
	<0 208 4>, <0 209 4>;
	mmu-masters = <&fsl_mc 0x300 0>;
	};

	dspi: dspi@2100000 {
	status = "disabled";
	compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x0 0x2100000 0x0 0x10000>;
	interrupts = <0 26 0x4>; /* Level high type */
	clocks = <&clockgen 4 3>;
	clock-names = "dspi";
	spi-num-chipselects = <5>;
	bus-num = <0>;
	};

	esdhc: esdhc@2140000 {
	status = "disabled";
	compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
	reg = <0x0 0x2140000 0x0 0x10000>;
	interrupts = <0 28 0x4>; /* Level high type */
	clock-frequency = <0>; /* Updated by bootloader */
	voltage-ranges = <1800 1800 3300 3300>;
	sdhci,auto-cmd12;
	little-endian;
	bus-width = <4>;
	};

	gpio0: gpio@2300000 {
	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
	reg = <0x0 0x2300000 0x0 0x10000>;
	interrupts = <0 36 0x4>; /* Level high type */
	gpio-controller;
	little-endian;
	#gpio-cells = <2>;
	interrupt-controller;
	#interrupt-cells = <2>;
	};

	gpio1: gpio@2310000 {
	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
	reg = <0x0 0x2310000 0x0 0x10000>;
	interrupts = <0 36 0x4>; /* Level high type */
	gpio-controller;
	little-endian;
	#gpio-cells = <2>;
	interrupt-controller;
	#interrupt-cells = <2>;
	};

	gpio2: gpio@2320000 {
	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
	reg = <0x0 0x2320000 0x0 0x10000>;
	interrupts = <0 37 0x4>; /* Level high type */
	gpio-controller;
	little-endian;
	#gpio-cells = <2>;
	interrupt-controller;
	#interrupt-cells = <2>;
	};

	gpio3: gpio@2330000 {
	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
	reg = <0x0 0x2330000 0x0 0x10000>;
	interrupts = <0 37 0x4>; /* Level high type */
	gpio-controller;
	little-endian;
	#gpio-cells = <2>;
	interrupt-controller;
	#interrupt-cells = <2>;
	};

	i2c0: i2c@2000000 {
	status = "disabled";
	compatible = "fsl,vf610-i2c";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x0 0x2000000 0x0 0x10000>;
	interrupts = <0 34 0x4>; /* Level high type */
	clock-names = "i2c";
	clocks = <&clockgen 4 3>;
	};

	i2c1: i2c@2010000 {
	status = "disabled";
	compatible = "fsl,vf610-i2c";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x0 0x2010000 0x0 0x10000>;
	interrupts = <0 34 0x4>; /* Level high type */
	clock-names = "i2c";
	clocks = <&clockgen 4 3>;
	};

	i2c2: i2c@2020000 {
	status = "disabled";
	compatible = "fsl,vf610-i2c";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x0 0x2020000 0x0 0x10000>;
	interrupts = <0 35 0x4>; /* Level high type */
	clock-names = "i2c";
	clocks = <&clockgen 4 3>;
	};

	i2c3: i2c@2030000 {
	status = "disabled";
	compatible = "fsl,vf610-i2c";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x0 0x2030000 0x0 0x10000>;
	interrupts = <0 35 0x4>; /* Level high type */
	clock-names = "i2c";
	clocks = <&clockgen 4 3>;
	};

	ifc: ifc@2240000 {
	compatible = "fsl,ifc", "simple-bus";
	reg = <0x0 0x2240000 0x0 0x20000>;
	interrupts = <0 21 0x4>; /* Level high type */
	little-endian;
	#address-cells = <2>;
	#size-cells = <1>;

	ranges = <0 0 0x5 0x80000000 0x08000000
	2 0 0x5 0x30000000 0x00010000
	3 0 0x5 0x20000000 0x00010000>;
	};

	qspi: quadspi@20c0000 {
	status = "disabled";
	compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x0 0x20c0000 0x0 0x10000>,
	<0x0 0x20000000 0x0 0x10000000>;
	reg-names = "QuadSPI", "QuadSPI-memory";
	interrupts = <0 25 0x4>; /* Level high type */
	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
	clock-names = "qspi_en", "qspi";
	};

	pcie1: pcie@3400000 {
	compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
	"snps,dw-pcie";
	reg-names = "regs", "config";
	interrupts = <0 108 0x4>; /* Level high type */
	interrupt-names = "intr";
	#address-cells = <3>;
	#size-cells = <2>;
	device_type = "pci";
	dma-coherent;
	num-lanes = <4>;
	bus-range = <0x0 0xff>;
	msi-parent = <&its>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
	<0000 0 0 2 &gic 0 0 0 110 4>,
	<0000 0 0 3 &gic 0 0 0 111 4>,
	<0000 0 0 4 &gic 0 0 0 112 4>;
	};

	pcie2: pcie@3500000 {
	compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
	"snps,dw-pcie";
	reg-names = "regs", "config";
	interrupts = <0 113 0x4>; /* Level high type */
	interrupt-names = "intr";
	#address-cells = <3>;
	#size-cells = <2>;
	device_type = "pci";
	dma-coherent;
	num-lanes = <4>;
	bus-range = <0x0 0xff>;
	msi-parent = <&its>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
	<0000 0 0 2 &gic 0 0 0 115 4>,
	<0000 0 0 3 &gic 0 0 0 116 4>,
	<0000 0 0 4 &gic 0 0 0 117 4>;
	};

	pcie3: pcie@3600000 {
	compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
	"snps,dw-pcie";
	reg-names = "regs", "config";
	interrupts = <0 118 0x4>; /* Level high type */
	interrupt-names = "intr";
	#address-cells = <3>;
	#size-cells = <2>;
	device_type = "pci";
	dma-coherent;
	num-lanes = <8>;
	bus-range = <0x0 0xff>;
	msi-parent = <&its>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
	<0000 0 0 2 &gic 0 0 0 120 4>,
	<0000 0 0 3 &gic 0 0 0 121 4>,
	<0000 0 0 4 &gic 0 0 0 122 4>;
	};

	pcie4: pcie@3700000 {
	compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
	"snps,dw-pcie";
	reg-names = "regs", "config";
	interrupts = <0 123 0x4>; /* Level high type */
	interrupt-names = "intr";
	#address-cells = <3>;
	#size-cells = <2>;
	device_type = "pci";
	dma-coherent;
	num-lanes = <4>;
	bus-range = <0x0 0xff>;
	msi-parent = <&its>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
	<0000 0 0 2 &gic 0 0 0 125 4>,
	<0000 0 0 3 &gic 0 0 0 126 4>,
	<0000 0 0 4 &gic 0 0 0 127 4>;
	};

	sata0: sata@3200000 {
	status = "disabled";
	compatible = "fsl,ls2080a-ahci";
	reg = <0x0 0x3200000 0x0 0x10000>;
	interrupts = <0 133 0x4>; /* Level high type */
	clocks = <&clockgen 4 3>;
	dma-coherent;
	};

	sata1: sata@3210000 {
	status = "disabled";
	compatible = "fsl,ls2080a-ahci";
	reg = <0x0 0x3210000 0x0 0x10000>;
	interrupts = <0 136 0x4>; /* Level high type */
	clocks = <&clockgen 4 3>;
	dma-coherent;
	};

	usb0: usb3@3100000 {
	status = "disabled";
	compatible = "snps,dwc3";
	reg = <0x0 0x3100000 0x0 0x10000>;
	interrupts = <0 80 0x4>; /* Level high type */
	dr_mode = "host";
	snps,quirk-frame-length-adjustment = <0x20>;
	snps,dis_rxdet_inp3_quirk;
	};

	usb1: usb3@3110000 {
	status = "disabled";
	compatible = "snps,dwc3";
	reg = <0x0 0x3110000 0x0 0x10000>;
	interrupts = <0 81 0x4>; /* Level high type */
	dr_mode = "host";
	snps,quirk-frame-length-adjustment = <0x20>;
	snps,dis_rxdet_inp3_quirk;
	};

	ccn@4000000 {
	compatible = "arm,ccn-504";
	reg = <0x0 0x04000000 0x0 0x01000000>;
	interrupts = <0 12 4>;
	};
	};

	ddr1: memory-controller@1080000 {
	compatible = "fsl,qoriq-memory-controller";
	reg = <0x0 0x1080000 0x0 0x1000>;
	interrupts = <0 17 0x4>;
	little-endian;
	};

	ddr2: memory-controller@1090000 {
	compatible = "fsl,qoriq-memory-controller";
	reg = <0x0 0x1090000 0x0 0x1000>;
	interrupts = <0 18 0x4>;
	little-endian;
	};
	};