[ALSA] sound/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 4a336ea..333c62d 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -2395,7 +2395,7 @@
if (!(hwread(vortex->mmio, VORTEX_STAT) & 0x1))
return IRQ_NONE;
- // This is the Interrrupt Enable flag we set before (consistency check).
+ // This is the Interrupt Enable flag we set before (consistency check).
if (!(hwread(vortex->mmio, VORTEX_CTRL) & CTRL_IRQ_ENABLE))
return IRQ_NONE;
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 8c44fef..28f98bd 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -8,7 +8,7 @@
* - Sometimes the SPDIF input DSP tasks get's unsynchronized
* and the SPDIF get somewhat "distorcionated", or/and left right channel
* are swapped. To get around this problem when it happens, mute and unmute
- * the SPDIF input mixer controll.
+ * the SPDIF input mixer control.
* - On the Hercules Game Theater XP the amplifier are sometimes turned
* off on inadecuate moments which causes distorcions on sound.
*
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 851abfe..2e242db 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -418,7 +418,7 @@
/* free the private data */
void (*private_free)(struct hda_bus *);
#ifdef CONFIG_SND_HDA_POWER_SAVE
- /* notify power-up/down from codec to contoller */
+ /* notify power-up/down from codec to controller */
void (*pm_notify)(struct hda_codec *codec);
#endif
};
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 7956b24..67ec08c 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -3604,7 +3604,7 @@
/* ASSUMPTION: hdsp->lock is either held, or
there is no need to hold it (e.g. during module
- initalization).
+ initialization).
*/
/* set defaults:
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index f1bdda6..6b1d529 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -3348,7 +3348,7 @@
unsigned int i;
/* ASSUMPTION: hdspm->lock is either held, or there is no need to
- hold it (e.g. during module initalization).
+ hold it (e.g. during module initialization).
*/
/* set defaults: */
@@ -3416,7 +3416,7 @@
/*------------------------------------------------------------
- interupt
+ interrupt
------------------------------------------------------------*/
static irqreturn_t snd_hdspm_interrupt(int irq, void *dev_id)
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index 34f96f1..1d73be6 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -148,7 +148,7 @@
#define RME9652_start_bit (1<<0) /* start record/play */
/* bits 1-3 encode buffersize/latency */
#define RME9652_Master (1<<4) /* Clock Mode Master=1,Slave/Auto=0 */
-#define RME9652_IE (1<<5) /* Interupt Enable */
+#define RME9652_IE (1<<5) /* Interrupt Enable */
#define RME9652_freq (1<<6) /* samplerate 0=44.1/88.2, 1=48/96 kHz */
#define RME9652_freq1 (1<<7) /* if 0, 32kHz, else always 1 */
#define RME9652_DS (1<<8) /* Doule Speed 0=44.1/48, 1=88.2/96 Khz */
@@ -1826,7 +1826,7 @@
/* ASSUMPTION: rme9652->lock is either held, or
there is no need to hold it (e.g. during module
- initalization).
+ initialization).
*/
/* set defaults:
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index 59a3195..c8d5665 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -436,7 +436,7 @@
Description: This routine will complete and write the 5 hardware channel
registers to hardware.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
voice - synthesizer voice structure
Each register field.
@@ -514,7 +514,7 @@
Description: This routine will write the new CSO offset
register to hardware.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
voice - synthesizer voice structure
CSO - new CSO value
@@ -540,7 +540,7 @@
Description: This routine will write the new ESO offset
register to hardware.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
voice - synthesizer voice structure
ESO - new ESO value
@@ -566,7 +566,7 @@
Description: This routine will write the new voice volume
register to hardware.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
voice - synthesizer voice structure
Vol - new voice volume
@@ -597,7 +597,7 @@
Description: This routine will write the new voice pan
register to hardware.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
voice - synthesizer voice structure
Pan - new pan value
@@ -619,7 +619,7 @@
Description: This routine will write the new reverb volume
register to hardware.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
voice - synthesizer voice structure
RVol - new reverb volume
@@ -643,7 +643,7 @@
Description: This routine will write the new chorus volume
register to hardware.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
voice - synthesizer voice structure
CVol - new chorus volume
@@ -666,7 +666,7 @@
Description: This routine converts rate in HZ to hardware delta value.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
rate - Real or Virtual channel number.
Returns: Delta value.
@@ -696,7 +696,7 @@
Description: This routine converts rate in HZ to hardware delta value.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
rate - Real or Virtual channel number.
Returns: Delta value.
@@ -726,7 +726,7 @@
Description: This routine converts rate in HZ to spurious threshold.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
rate - Real or Virtual channel number.
Returns: Delta value.
@@ -748,7 +748,7 @@
Description: This routine returns a control mode for a PCM channel.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
substream - PCM substream
Returns: Control value.
@@ -781,7 +781,7 @@
Description: Device I/O control handler for playback/capture parameters.
- Paramters: substream - PCM substream class
+ Parameters: substream - PCM substream class
cmd - what ioctl message to process
arg - additional message infoarg
@@ -1664,7 +1664,7 @@
Description: This routine return the capture position
- Paramters: pcm1 - PCM device class
+ Parameters: pcm1 - PCM device class
Returns: position of buffer
@@ -2157,7 +2157,7 @@
Description: This routine registers the 4DWave device for PCM support.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
Returns: None
@@ -2215,7 +2215,7 @@
Description: This routine registers the 4DWave device for foldback PCM support.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
Returns: None
@@ -2272,7 +2272,7 @@
Description: This routine registers the 4DWave-NX device for SPDIF support.
- Paramters: trident - pointer to target device class for 4DWave-NX.
+ Parameters: trident - pointer to target device class for 4DWave-NX.
Returns: None
@@ -2956,7 +2956,7 @@
Description: This routine registers the 4DWave device for mixer support.
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
Returns: None
@@ -3338,7 +3338,7 @@
Description: Allocate and set up the TLB page table on 4D NX.
Each entry has 4 bytes (physical PCI address).
- Paramters: trident - pointer to target device class for 4DWave.
+ Parameters: trident - pointer to target device class for 4DWave.
Returns: 0 or negative error code
@@ -3515,7 +3515,7 @@
Description: This routine will create the device specific class for
the 4DWave card. It will also perform basic initialization.
- Paramters: card - which card to create
+ Parameters: card - which card to create
pci - interface to PCI bus resource info
dma1ptr - playback dma buffer
dma2ptr - capture dma buffer
@@ -3661,7 +3661,7 @@
Description: This routine will free the device specific class for
the 4DWave card.
- Paramters: trident - device specific private data for 4DWave card
+ Parameters: trident - device specific private data for 4DWave card
Returns: None.
@@ -3699,7 +3699,7 @@
Description: ISR for Trident 4DWave device
- Paramters: trident - device specific private data for 4DWave card
+ Parameters: trident - device specific private data for 4DWave card
Problems: It seems that Trident chips generates interrupts more than
one time in special cases. The spurious interrupts are