mtd: denali: remove unnecessary variable initializations
All of these variables are initialized to zero and then
set to a different value below.
Zero-initializing is redundant.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 766af04..20823df 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -146,7 +146,7 @@
/* reads the status of the device */
static void read_status(struct denali_nand_info *denali)
{
- uint32_t cmd = 0x0;
+ uint32_t cmd;
/* initialize the data buffer to store status */
reset_buf(denali);
@@ -161,7 +161,7 @@
/* resets a specific device connected to the core */
static void reset_bank(struct denali_nand_info *denali)
{
- uint32_t irq_status = 0;
+ uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__RST_COMP |
INTR_STATUS__TIME_OUT;
@@ -581,7 +581,7 @@
static void denali_irq_init(struct denali_nand_info *denali)
{
- uint32_t int_mask = 0;
+ uint32_t int_mask;
int i;
/* Disable global interrupts */
@@ -624,7 +624,7 @@
static inline void clear_interrupt(struct denali_nand_info *denali,
uint32_t irq_mask)
{
- uint32_t intr_status_reg = 0;
+ uint32_t intr_status_reg;
intr_status_reg = INTR_STATUS(denali->flash_bank);
@@ -633,7 +633,8 @@
static void clear_interrupts(struct denali_nand_info *denali)
{
- uint32_t status = 0x0;
+ uint32_t status;
+
spin_lock_irq(&denali->irq_lock);
status = read_interrupt_status(denali);
@@ -645,7 +646,7 @@
static uint32_t read_interrupt_status(struct denali_nand_info *denali)
{
- uint32_t intr_status_reg = 0;
+ uint32_t intr_status_reg;
intr_status_reg = INTR_STATUS(denali->flash_bank);
@@ -659,7 +660,7 @@
static irqreturn_t denali_isr(int irq, void *dev_id)
{
struct denali_nand_info *denali = dev_id;
- uint32_t irq_status = 0x0;
+ uint32_t irq_status;
irqreturn_t result = IRQ_NONE;
spin_lock(&denali->irq_lock);
@@ -693,8 +694,8 @@
static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
{
- unsigned long comp_res = 0;
- uint32_t intr_status = 0;
+ unsigned long comp_res;
+ uint32_t intr_status;
bool retry = false;
unsigned long timeout = msecs_to_jiffies(1000);
@@ -736,7 +737,7 @@
static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
bool transfer_spare)
{
- int ecc_en_flag = 0, transfer_spare_flag = 0;
+ int ecc_en_flag, transfer_spare_flag;
/* set ECC, transfer spare bits if needed */
ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
@@ -759,8 +760,8 @@
int op)
{
int status = PASS;
- uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
- irq_mask = 0;
+ uint32_t page_count = 1;
+ uint32_t addr, cmd, irq_status, irq_mask;
if (op == DENALI_READ)
irq_mask = INTR_STATUS__LOAD_COMP;
@@ -829,7 +830,7 @@
const uint8_t *buf,
int len)
{
- uint32_t i = 0, *buf32;
+ uint32_t i, *buf32;
/*
* verify that the len is a multiple of 4.
@@ -849,7 +850,7 @@
uint8_t *buf,
int len)
{
- uint32_t i = 0, *buf32;
+ uint32_t i, *buf32;
/*
* we assume that len will be a multiple of 4, if not it would be nice
@@ -870,7 +871,7 @@
static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_status = 0;
+ uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP |
INTR_STATUS__PROGRAM_FAIL;
int status = 0;
@@ -899,8 +900,8 @@
static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_mask = INTR_STATUS__LOAD_COMP,
- irq_status = 0, addr = 0x0, cmd = 0x0;
+ uint32_t irq_mask = INTR_STATUS__LOAD_COMP;
+ uint32_t irq_status, addr, cmd;
denali->page = page;
@@ -938,7 +939,7 @@
*/
static bool is_erased(uint8_t *buf, int len)
{
- int i = 0;
+ int i;
for (i = 0; i < len; i++)
if (buf[i] != 0xFF)
return false;
@@ -961,9 +962,8 @@
if (irq_status & INTR_STATUS__ECC_ERR) {
/* read the ECC errors. we'll ignore them for now */
- uint32_t err_address = 0, err_correction_info = 0;
- uint32_t err_byte = 0, err_sector = 0, err_device = 0;
- uint32_t err_correction_value = 0;
+ uint32_t err_address, err_correction_info, err_byte,
+ err_sector, err_device, err_correction_value;
denali_set_intr_modes(denali, false);
do {
@@ -1026,19 +1026,14 @@
/* programs the controller to either enable/disable DMA transfers */
static void denali_enable_dma(struct denali_nand_info *denali, bool en)
{
- uint32_t reg_val = 0x0;
-
- if (en)
- reg_val = DMA_ENABLE__FLAG;
-
- iowrite32(reg_val, denali->flash_reg + DMA_ENABLE);
+ iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE);
ioread32(denali->flash_reg + DMA_ENABLE);
}
/* setups the HW to perform the data DMA */
static void denali_setup_dma(struct denali_nand_info *denali, int op)
{
- uint32_t mode = 0x0;
+ uint32_t mode;
const int page_count = 1;
dma_addr_t addr = denali->buf.dma_buf;
@@ -1071,7 +1066,7 @@
dma_addr_t addr = denali->buf.dma_buf;
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
- uint32_t irq_status = 0;
+ uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP |
INTR_STATUS__PROGRAM_FAIL;
@@ -1170,7 +1165,7 @@
dma_addr_t addr = denali->buf.dma_buf;
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
- uint32_t irq_status = 0;
+ uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__ECC_TRANSACTION_DONE |
INTR_STATUS__ECC_ERR;
bool check_erased_page = false;
@@ -1222,7 +1217,7 @@
dma_addr_t addr = denali->buf.dma_buf;
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
- uint32_t irq_status = 0;
+ uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP;
if (page != denali->page) {
@@ -1286,7 +1281,7 @@
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t cmd = 0x0, irq_status = 0;
+ uint32_t cmd, irq_status;
clear_interrupts(denali);