| /**************************************************************************** |
| * Driver for Solarflare Solarstorm network controllers and boards |
| * Copyright 2007-2008 Solarflare Communications Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation, incorporated herein by reference. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/seq_file.h> |
| #include "efx.h" |
| #include "mdio_10g.h" |
| #include "falcon.h" |
| #include "phy.h" |
| #include "regs.h" |
| #include "workarounds.h" |
| #include "selftest.h" |
| |
| /* We expect these MMDs to be in the package. SFT9001 also has a |
| * clause 22 extension MMD, but since it doesn't have all the generic |
| * MMD registers it is pointless to include it here. |
| */ |
| #define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD | \ |
| MDIO_DEVS_PCS | \ |
| MDIO_DEVS_PHYXS | \ |
| MDIO_DEVS_AN) |
| |
| #define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) | \ |
| (1 << LOOPBACK_PCS) | \ |
| (1 << LOOPBACK_PMAPMD) | \ |
| (1 << LOOPBACK_NETWORK)) |
| |
| #define SFT9001_LOOPBACKS ((1 << LOOPBACK_GPHY) | \ |
| (1 << LOOPBACK_PHYXS) | \ |
| (1 << LOOPBACK_PCS) | \ |
| (1 << LOOPBACK_PMAPMD) | \ |
| (1 << LOOPBACK_NETWORK)) |
| |
| /* We complain if we fail to see the link partner as 10G capable this many |
| * times in a row (must be > 1 as sampling the autoneg. registers is racy) |
| */ |
| #define MAX_BAD_LP_TRIES (5) |
| |
| /* Extended control register */ |
| #define PMA_PMD_XCONTROL_REG 49152 |
| #define PMA_PMD_EXT_GMII_EN_LBN 1 |
| #define PMA_PMD_EXT_GMII_EN_WIDTH 1 |
| #define PMA_PMD_EXT_CLK_OUT_LBN 2 |
| #define PMA_PMD_EXT_CLK_OUT_WIDTH 1 |
| #define PMA_PMD_LNPGA_POWERDOWN_LBN 8 /* SFX7101 only */ |
| #define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1 |
| #define PMA_PMD_EXT_CLK312_LBN 8 /* SFT9001 only */ |
| #define PMA_PMD_EXT_CLK312_WIDTH 1 |
| #define PMA_PMD_EXT_LPOWER_LBN 12 |
| #define PMA_PMD_EXT_LPOWER_WIDTH 1 |
| #define PMA_PMD_EXT_ROBUST_LBN 14 |
| #define PMA_PMD_EXT_ROBUST_WIDTH 1 |
| #define PMA_PMD_EXT_SSR_LBN 15 |
| #define PMA_PMD_EXT_SSR_WIDTH 1 |
| |
| /* extended status register */ |
| #define PMA_PMD_XSTATUS_REG 49153 |
| #define PMA_PMD_XSTAT_MDIX_LBN 14 |
| #define PMA_PMD_XSTAT_FLP_LBN (12) |
| |
| /* LED control register */ |
| #define PMA_PMD_LED_CTRL_REG 49159 |
| #define PMA_PMA_LED_ACTIVITY_LBN (3) |
| |
| /* LED function override register */ |
| #define PMA_PMD_LED_OVERR_REG 49161 |
| /* Bit positions for different LEDs (there are more but not wired on SFE4001)*/ |
| #define PMA_PMD_LED_LINK_LBN (0) |
| #define PMA_PMD_LED_SPEED_LBN (2) |
| #define PMA_PMD_LED_TX_LBN (4) |
| #define PMA_PMD_LED_RX_LBN (6) |
| /* Override settings */ |
| #define PMA_PMD_LED_AUTO (0) /* H/W control */ |
| #define PMA_PMD_LED_ON (1) |
| #define PMA_PMD_LED_OFF (2) |
| #define PMA_PMD_LED_FLASH (3) |
| #define PMA_PMD_LED_MASK 3 |
| /* All LEDs under hardware control */ |
| #define SFT9001_PMA_PMD_LED_DEFAULT 0 |
| /* Green and Amber under hardware control, Red off */ |
| #define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) |
| |
| #define PMA_PMD_SPEED_ENABLE_REG 49192 |
| #define PMA_PMD_100TX_ADV_LBN 1 |
| #define PMA_PMD_100TX_ADV_WIDTH 1 |
| #define PMA_PMD_1000T_ADV_LBN 2 |
| #define PMA_PMD_1000T_ADV_WIDTH 1 |
| #define PMA_PMD_10000T_ADV_LBN 3 |
| #define PMA_PMD_10000T_ADV_WIDTH 1 |
| #define PMA_PMD_SPEED_LBN 4 |
| #define PMA_PMD_SPEED_WIDTH 4 |
| |
| /* Cable diagnostics - SFT9001 only */ |
| #define PMA_PMD_CDIAG_CTRL_REG 49213 |
| #define CDIAG_CTRL_IMMED_LBN 15 |
| #define CDIAG_CTRL_BRK_LINK_LBN 12 |
| #define CDIAG_CTRL_IN_PROG_LBN 11 |
| #define CDIAG_CTRL_LEN_UNIT_LBN 10 |
| #define CDIAG_CTRL_LEN_METRES 1 |
| #define PMA_PMD_CDIAG_RES_REG 49174 |
| #define CDIAG_RES_A_LBN 12 |
| #define CDIAG_RES_B_LBN 8 |
| #define CDIAG_RES_C_LBN 4 |
| #define CDIAG_RES_D_LBN 0 |
| #define CDIAG_RES_WIDTH 4 |
| #define CDIAG_RES_OPEN 2 |
| #define CDIAG_RES_OK 1 |
| #define CDIAG_RES_INVALID 0 |
| /* Set of 4 registers for pairs A-D */ |
| #define PMA_PMD_CDIAG_LEN_REG 49175 |
| |
| /* Serdes control registers - SFT9001 only */ |
| #define PMA_PMD_CSERDES_CTRL_REG 64258 |
| /* Set the 156.25 MHz output to 312.5 MHz to drive Falcon's XMAC */ |
| #define PMA_PMD_CSERDES_DEFAULT 0x000f |
| |
| /* Misc register defines - SFX7101 only */ |
| #define PCS_CLOCK_CTRL_REG 55297 |
| #define PLL312_RST_N_LBN 2 |
| |
| #define PCS_SOFT_RST2_REG 55302 |
| #define SERDES_RST_N_LBN 13 |
| #define XGXS_RST_N_LBN 12 |
| |
| #define PCS_TEST_SELECT_REG 55303 /* PRM 10.5.8 */ |
| #define CLK312_EN_LBN 3 |
| |
| /* PHYXS registers */ |
| #define PHYXS_XCONTROL_REG 49152 |
| #define PHYXS_RESET_LBN 15 |
| #define PHYXS_RESET_WIDTH 1 |
| |
| #define PHYXS_TEST1 (49162) |
| #define LOOPBACK_NEAR_LBN (8) |
| #define LOOPBACK_NEAR_WIDTH (1) |
| |
| /* Boot status register */ |
| #define PCS_BOOT_STATUS_REG 53248 |
| #define PCS_BOOT_FATAL_ERROR_LBN 0 |
| #define PCS_BOOT_PROGRESS_LBN 1 |
| #define PCS_BOOT_PROGRESS_WIDTH 2 |
| #define PCS_BOOT_PROGRESS_INIT 0 |
| #define PCS_BOOT_PROGRESS_WAIT_MDIO 1 |
| #define PCS_BOOT_PROGRESS_CHECKSUM 2 |
| #define PCS_BOOT_PROGRESS_JUMP 3 |
| #define PCS_BOOT_DOWNLOAD_WAIT_LBN 3 |
| #define PCS_BOOT_CODE_STARTED_LBN 4 |
| |
| /* 100M/1G PHY registers */ |
| #define GPHY_XCONTROL_REG 49152 |
| #define GPHY_ISOLATE_LBN 10 |
| #define GPHY_ISOLATE_WIDTH 1 |
| #define GPHY_DUPLEX_LBN 8 |
| #define GPHY_DUPLEX_WIDTH 1 |
| #define GPHY_LOOPBACK_NEAR_LBN 14 |
| #define GPHY_LOOPBACK_NEAR_WIDTH 1 |
| |
| #define C22EXT_STATUS_REG 49153 |
| #define C22EXT_STATUS_LINK_LBN 2 |
| #define C22EXT_STATUS_LINK_WIDTH 1 |
| |
| #define C22EXT_MSTSLV_CTRL 49161 |
| #define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 |
| #define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 |
| |
| #define C22EXT_MSTSLV_STATUS 49162 |
| #define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 |
| #define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 |
| |
| /* Time to wait between powering down the LNPGA and turning off the power |
| * rails */ |
| #define LNPGA_PDOWN_WAIT (HZ / 5) |
| |
| struct tenxpress_phy_data { |
| enum efx_loopback_mode loopback_mode; |
| enum efx_phy_mode phy_mode; |
| int bad_lp_tries; |
| }; |
| |
| static ssize_t show_phy_short_reach(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev)); |
| int reg; |
| |
| reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR); |
| return sprintf(buf, "%d\n", !!(reg & MDIO_PMA_10GBT_TXPWR_SHORT)); |
| } |
| |
| static ssize_t set_phy_short_reach(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev)); |
| int rc; |
| |
| rtnl_lock(); |
| efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, |
| MDIO_PMA_10GBT_TXPWR_SHORT, |
| count != 0 && *buf != '0'); |
| rc = efx_reconfigure_port(efx); |
| rtnl_unlock(); |
| |
| return rc < 0 ? rc : (ssize_t)count; |
| } |
| |
| static DEVICE_ATTR(phy_short_reach, 0644, show_phy_short_reach, |
| set_phy_short_reach); |
| |
| int sft9001_wait_boot(struct efx_nic *efx) |
| { |
| unsigned long timeout = jiffies + HZ + 1; |
| int boot_stat; |
| |
| for (;;) { |
| boot_stat = efx_mdio_read(efx, MDIO_MMD_PCS, |
| PCS_BOOT_STATUS_REG); |
| if (boot_stat >= 0) { |
| EFX_LOG(efx, "PHY boot status = %#x\n", boot_stat); |
| switch (boot_stat & |
| ((1 << PCS_BOOT_FATAL_ERROR_LBN) | |
| (3 << PCS_BOOT_PROGRESS_LBN) | |
| (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN) | |
| (1 << PCS_BOOT_CODE_STARTED_LBN))) { |
| case ((1 << PCS_BOOT_FATAL_ERROR_LBN) | |
| (PCS_BOOT_PROGRESS_CHECKSUM << |
| PCS_BOOT_PROGRESS_LBN)): |
| case ((1 << PCS_BOOT_FATAL_ERROR_LBN) | |
| (PCS_BOOT_PROGRESS_INIT << |
| PCS_BOOT_PROGRESS_LBN) | |
| (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN)): |
| return -EINVAL; |
| case ((PCS_BOOT_PROGRESS_WAIT_MDIO << |
| PCS_BOOT_PROGRESS_LBN) | |
| (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN)): |
| return (efx->phy_mode & PHY_MODE_SPECIAL) ? |
| 0 : -EIO; |
| case ((PCS_BOOT_PROGRESS_JUMP << |
| PCS_BOOT_PROGRESS_LBN) | |
| (1 << PCS_BOOT_CODE_STARTED_LBN)): |
| case ((PCS_BOOT_PROGRESS_JUMP << |
| PCS_BOOT_PROGRESS_LBN) | |
| (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN) | |
| (1 << PCS_BOOT_CODE_STARTED_LBN)): |
| return (efx->phy_mode & PHY_MODE_SPECIAL) ? |
| -EIO : 0; |
| default: |
| if (boot_stat & (1 << PCS_BOOT_FATAL_ERROR_LBN)) |
| return -EIO; |
| break; |
| } |
| } |
| |
| if (time_after_eq(jiffies, timeout)) |
| return -ETIMEDOUT; |
| |
| msleep(50); |
| } |
| } |
| |
| static int tenxpress_init(struct efx_nic *efx) |
| { |
| int reg; |
| |
| if (efx->phy_type == PHY_TYPE_SFX7101) { |
| /* Enable 312.5 MHz clock */ |
| efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG, |
| 1 << CLK312_EN_LBN); |
| } else { |
| /* Enable 312.5 MHz clock and GMII */ |
| reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG); |
| reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) | |
| (1 << PMA_PMD_EXT_CLK_OUT_LBN) | |
| (1 << PMA_PMD_EXT_CLK312_LBN) | |
| (1 << PMA_PMD_EXT_ROBUST_LBN)); |
| |
| efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); |
| efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, |
| GPHY_XCONTROL_REG, 1 << GPHY_ISOLATE_LBN, |
| false); |
| } |
| |
| /* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */ |
| if (efx->phy_type == PHY_TYPE_SFX7101) { |
| efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG, |
| 1 << PMA_PMA_LED_ACTIVITY_LBN, true); |
| efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, |
| SFX7101_PMA_PMD_LED_DEFAULT); |
| } |
| |
| return 0; |
| } |
| |
| static int tenxpress_phy_init(struct efx_nic *efx) |
| { |
| struct tenxpress_phy_data *phy_data; |
| int rc = 0; |
| |
| falcon_board(efx)->type->init_phy(efx); |
| |
| phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); |
| if (!phy_data) |
| return -ENOMEM; |
| efx->phy_data = phy_data; |
| phy_data->phy_mode = efx->phy_mode; |
| |
| if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { |
| if (efx->phy_type == PHY_TYPE_SFT9001A) { |
| int reg; |
| reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, |
| PMA_PMD_XCONTROL_REG); |
| reg |= (1 << PMA_PMD_EXT_SSR_LBN); |
| efx_mdio_write(efx, MDIO_MMD_PMAPMD, |
| PMA_PMD_XCONTROL_REG, reg); |
| mdelay(200); |
| } |
| |
| rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); |
| if (rc < 0) |
| goto fail; |
| |
| rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0); |
| if (rc < 0) |
| goto fail; |
| } |
| |
| rc = tenxpress_init(efx); |
| if (rc < 0) |
| goto fail; |
| |
| /* Initialise advertising flags */ |
| efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | |
| ADVERTISED_10000baseT_Full); |
| if (efx->phy_type != PHY_TYPE_SFX7101) |
| efx->link_advertising |= (ADVERTISED_1000baseT_Full | |
| ADVERTISED_100baseT_Full); |
| efx_link_set_wanted_fc(efx, efx->wanted_fc); |
| efx_mdio_an_reconfigure(efx); |
| |
| if (efx->phy_type == PHY_TYPE_SFT9001B) { |
| rc = device_create_file(&efx->pci_dev->dev, |
| &dev_attr_phy_short_reach); |
| if (rc) |
| goto fail; |
| } |
| |
| schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ |
| |
| /* Let XGXS and SerDes out of reset */ |
| falcon_reset_xaui(efx); |
| |
| return 0; |
| |
| fail: |
| kfree(efx->phy_data); |
| efx->phy_data = NULL; |
| return rc; |
| } |
| |
| /* Perform a "special software reset" on the PHY. The caller is |
| * responsible for saving and restoring the PHY hardware registers |
| * properly, and masking/unmasking LASI */ |
| static int tenxpress_special_reset(struct efx_nic *efx) |
| { |
| int rc, reg; |
| |
| /* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so |
| * a special software reset can glitch the XGMAC sufficiently for stats |
| * requests to fail. */ |
| falcon_stop_nic_stats(efx); |
| |
| /* Initiate reset */ |
| reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG); |
| reg |= (1 << PMA_PMD_EXT_SSR_LBN); |
| efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); |
| |
| mdelay(200); |
| |
| /* Wait for the blocks to come out of reset */ |
| rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); |
| if (rc < 0) |
| goto out; |
| |
| /* Try and reconfigure the device */ |
| rc = tenxpress_init(efx); |
| if (rc < 0) |
| goto out; |
| |
| /* Wait for the XGXS state machine to churn */ |
| mdelay(10); |
| out: |
| falcon_start_nic_stats(efx); |
| return rc; |
| } |
| |
| static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok) |
| { |
| struct tenxpress_phy_data *pd = efx->phy_data; |
| bool bad_lp; |
| int reg; |
| |
| if (link_ok) { |
| bad_lp = false; |
| } else { |
| /* Check that AN has started but not completed. */ |
| reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1); |
| if (!(reg & MDIO_AN_STAT1_LPABLE)) |
| return; /* LP status is unknown */ |
| bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE); |
| if (bad_lp) |
| pd->bad_lp_tries++; |
| } |
| |
| /* Nothing to do if all is well and was previously so. */ |
| if (!pd->bad_lp_tries) |
| return; |
| |
| /* Use the RX (red) LED as an error indicator once we've seen AN |
| * failure several times in a row, and also log a message. */ |
| if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) { |
| reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, |
| PMA_PMD_LED_OVERR_REG); |
| reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN); |
| if (!bad_lp) { |
| reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN; |
| } else { |
| reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN; |
| EFX_ERR(efx, "appears to be plugged into a port" |
| " that is not 10GBASE-T capable. The PHY" |
| " supports 10GBASE-T ONLY, so no link can" |
| " be established\n"); |
| } |
| efx_mdio_write(efx, MDIO_MMD_PMAPMD, |
| PMA_PMD_LED_OVERR_REG, reg); |
| pd->bad_lp_tries = bad_lp; |
| } |
| } |
| |
| static bool sfx7101_link_ok(struct efx_nic *efx) |
| { |
| return efx_mdio_links_ok(efx, |
| MDIO_DEVS_PMAPMD | |
| MDIO_DEVS_PCS | |
| MDIO_DEVS_PHYXS); |
| } |
| |
| static bool sft9001_link_ok(struct efx_nic *efx, struct ethtool_cmd *ecmd) |
| { |
| u32 reg; |
| |
| if (efx_phy_mode_disabled(efx->phy_mode)) |
| return false; |
| else if (efx->loopback_mode == LOOPBACK_GPHY) |
| return true; |
| else if (efx->loopback_mode) |
| return efx_mdio_links_ok(efx, |
| MDIO_DEVS_PMAPMD | |
| MDIO_DEVS_PHYXS); |
| |
| /* We must use the same definition of link state as LASI, |
| * otherwise we can miss a link state transition |
| */ |
| if (ecmd->speed == 10000) { |
| reg = efx_mdio_read(efx, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT1); |
| return reg & MDIO_PCS_10GBRT_STAT1_BLKLK; |
| } else { |
| reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_STATUS_REG); |
| return reg & (1 << C22EXT_STATUS_LINK_LBN); |
| } |
| } |
| |
| static void tenxpress_ext_loopback(struct efx_nic *efx) |
| { |
| efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1, |
| 1 << LOOPBACK_NEAR_LBN, |
| efx->loopback_mode == LOOPBACK_PHYXS); |
| if (efx->phy_type != PHY_TYPE_SFX7101) |
| efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, GPHY_XCONTROL_REG, |
| 1 << GPHY_LOOPBACK_NEAR_LBN, |
| efx->loopback_mode == LOOPBACK_GPHY); |
| } |
| |
| static void tenxpress_low_power(struct efx_nic *efx) |
| { |
| if (efx->phy_type == PHY_TYPE_SFX7101) |
| efx_mdio_set_mmds_lpower( |
| efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER), |
| TENXPRESS_REQUIRED_DEVS); |
| else |
| efx_mdio_set_flag( |
| efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, |
| 1 << PMA_PMD_EXT_LPOWER_LBN, |
| !!(efx->phy_mode & PHY_MODE_LOW_POWER)); |
| } |
| |
| static int tenxpress_phy_reconfigure(struct efx_nic *efx) |
| { |
| struct tenxpress_phy_data *phy_data = efx->phy_data; |
| bool phy_mode_change, loop_reset; |
| |
| if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { |
| phy_data->phy_mode = efx->phy_mode; |
| return 0; |
| } |
| |
| phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && |
| phy_data->phy_mode != PHY_MODE_NORMAL); |
| loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) || |
| LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); |
| |
| if (loop_reset || phy_mode_change) { |
| tenxpress_special_reset(efx); |
| |
| /* Reset XAUI if we were in 10G, and are staying |
| * in 10G. If we're moving into and out of 10G |
| * then xaui will be reset anyway */ |
| if (EFX_IS10G(efx)) |
| falcon_reset_xaui(efx); |
| } |
| |
| tenxpress_low_power(efx); |
| efx_mdio_transmit_disable(efx); |
| efx_mdio_phy_reconfigure(efx); |
| tenxpress_ext_loopback(efx); |
| efx_mdio_an_reconfigure(efx); |
| |
| phy_data->loopback_mode = efx->loopback_mode; |
| phy_data->phy_mode = efx->phy_mode; |
| |
| return 0; |
| } |
| |
| static void |
| tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); |
| |
| /* Poll for link state changes */ |
| static bool tenxpress_phy_poll(struct efx_nic *efx) |
| { |
| struct efx_link_state old_state = efx->link_state; |
| |
| if (efx->phy_type == PHY_TYPE_SFX7101) { |
| efx->link_state.up = sfx7101_link_ok(efx); |
| efx->link_state.speed = 10000; |
| efx->link_state.fd = true; |
| efx->link_state.fc = efx_mdio_get_pause(efx); |
| |
| sfx7101_check_bad_lp(efx, efx->link_state.up); |
| } else { |
| struct ethtool_cmd ecmd; |
| |
| /* Check the LASI alarm first */ |
| if (efx->loopback_mode == LOOPBACK_NONE && |
| !(efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT) & |
| MDIO_PMA_LASI_LSALARM)) |
| return false; |
| |
| tenxpress_get_settings(efx, &ecmd); |
| |
| efx->link_state.up = sft9001_link_ok(efx, &ecmd); |
| efx->link_state.speed = ecmd.speed; |
| efx->link_state.fd = (ecmd.duplex == DUPLEX_FULL); |
| efx->link_state.fc = efx_mdio_get_pause(efx); |
| } |
| |
| return !efx_link_state_equal(&efx->link_state, &old_state); |
| } |
| |
| static void tenxpress_phy_fini(struct efx_nic *efx) |
| { |
| int reg; |
| |
| if (efx->phy_type == PHY_TYPE_SFT9001B) |
| device_remove_file(&efx->pci_dev->dev, |
| &dev_attr_phy_short_reach); |
| |
| if (efx->phy_type == PHY_TYPE_SFX7101) { |
| /* Power down the LNPGA */ |
| reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); |
| efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); |
| |
| /* Waiting here ensures that the board fini, which can turn |
| * off the power to the PHY, won't get run until the LNPGA |
| * powerdown has been given long enough to complete. */ |
| schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ |
| } |
| |
| kfree(efx->phy_data); |
| efx->phy_data = NULL; |
| } |
| |
| |
| /* Override the RX, TX and link LEDs */ |
| void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) |
| { |
| int reg; |
| |
| switch (mode) { |
| case EFX_LED_OFF: |
| reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) | |
| (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) | |
| (PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN); |
| break; |
| case EFX_LED_ON: |
| reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) | |
| (PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) | |
| (PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN); |
| break; |
| default: |
| if (efx->phy_type == PHY_TYPE_SFX7101) |
| reg = SFX7101_PMA_PMD_LED_DEFAULT; |
| else |
| reg = SFT9001_PMA_PMD_LED_DEFAULT; |
| break; |
| } |
| |
| efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg); |
| } |
| |
| static const char *const sfx7101_test_names[] = { |
| "bist" |
| }; |
| |
| static int |
| sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags) |
| { |
| int rc; |
| |
| if (!(flags & ETH_TEST_FL_OFFLINE)) |
| return 0; |
| |
| /* BIST is automatically run after a special software reset */ |
| rc = tenxpress_special_reset(efx); |
| results[0] = rc ? -1 : 1; |
| |
| efx_mdio_an_reconfigure(efx); |
| |
| return rc; |
| } |
| |
| static const char *const sft9001_test_names[] = { |
| "bist", |
| "cable.pairA.status", |
| "cable.pairB.status", |
| "cable.pairC.status", |
| "cable.pairD.status", |
| "cable.pairA.length", |
| "cable.pairB.length", |
| "cable.pairC.length", |
| "cable.pairD.length", |
| }; |
| |
| static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags) |
| { |
| int rc = 0, rc2, i, ctrl_reg, res_reg; |
| |
| /* Initialise cable diagnostic results to unknown failure */ |
| for (i = 1; i < 9; ++i) |
| results[i] = -1; |
| |
| /* Run cable diagnostics; wait up to 5 seconds for them to complete. |
| * A cable fault is not a self-test failure, but a timeout is. */ |
| ctrl_reg = ((1 << CDIAG_CTRL_IMMED_LBN) | |
| (CDIAG_CTRL_LEN_METRES << CDIAG_CTRL_LEN_UNIT_LBN)); |
| if (flags & ETH_TEST_FL_OFFLINE) { |
| /* Break the link in order to run full diagnostics. We |
| * must reset the PHY to resume normal service. */ |
| ctrl_reg |= (1 << CDIAG_CTRL_BRK_LINK_LBN); |
| } |
| efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_CTRL_REG, |
| ctrl_reg); |
| i = 0; |
| while (efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_CTRL_REG) & |
| (1 << CDIAG_CTRL_IN_PROG_LBN)) { |
| if (++i == 50) { |
| rc = -ETIMEDOUT; |
| goto out; |
| } |
| msleep(100); |
| } |
| res_reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_RES_REG); |
| for (i = 0; i < 4; i++) { |
| int pair_res = |
| (res_reg >> (CDIAG_RES_A_LBN - i * CDIAG_RES_WIDTH)) |
| & ((1 << CDIAG_RES_WIDTH) - 1); |
| int len_reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, |
| PMA_PMD_CDIAG_LEN_REG + i); |
| if (pair_res == CDIAG_RES_OK) |
| results[1 + i] = 1; |
| else if (pair_res == CDIAG_RES_INVALID) |
| results[1 + i] = -1; |
| else |
| results[1 + i] = -pair_res; |
| if (pair_res != CDIAG_RES_INVALID && |
| pair_res != CDIAG_RES_OPEN && |
| len_reg != 0xffff) |
| results[5 + i] = len_reg; |
| } |
| |
| out: |
| if (flags & ETH_TEST_FL_OFFLINE) { |
| /* Reset, running the BIST and then resuming normal service. */ |
| rc2 = tenxpress_special_reset(efx); |
| results[0] = rc2 ? -1 : 1; |
| if (!rc) |
| rc = rc2; |
| |
| efx_mdio_an_reconfigure(efx); |
| } |
| |
| return rc; |
| } |
| |
| static void |
| tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) |
| { |
| u32 adv = 0, lpa = 0; |
| int reg; |
| |
| if (efx->phy_type != PHY_TYPE_SFX7101) { |
| reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_CTRL); |
| if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN)) |
| adv |= ADVERTISED_1000baseT_Full; |
| reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_STATUS); |
| if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN)) |
| lpa |= ADVERTISED_1000baseT_Half; |
| if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN)) |
| lpa |= ADVERTISED_1000baseT_Full; |
| } |
| reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL); |
| if (reg & MDIO_AN_10GBT_CTRL_ADV10G) |
| adv |= ADVERTISED_10000baseT_Full; |
| reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); |
| if (reg & MDIO_AN_10GBT_STAT_LP10G) |
| lpa |= ADVERTISED_10000baseT_Full; |
| |
| mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa); |
| |
| if (efx->phy_type != PHY_TYPE_SFX7101) { |
| ecmd->supported |= (SUPPORTED_100baseT_Full | |
| SUPPORTED_1000baseT_Full); |
| if (ecmd->speed != SPEED_10000) { |
| ecmd->eth_tp_mdix = |
| (efx_mdio_read(efx, MDIO_MMD_PMAPMD, |
| PMA_PMD_XSTATUS_REG) & |
| (1 << PMA_PMD_XSTAT_MDIX_LBN)) |
| ? ETH_TP_MDI_X : ETH_TP_MDI; |
| } |
| } |
| |
| /* In loopback, the PHY automatically brings up the correct interface, |
| * but doesn't advertise the correct speed. So override it */ |
| if (efx->loopback_mode == LOOPBACK_GPHY) |
| ecmd->speed = SPEED_1000; |
| else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) |
| ecmd->speed = SPEED_10000; |
| } |
| |
| static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) |
| { |
| if (!ecmd->autoneg) |
| return -EINVAL; |
| |
| return efx_mdio_set_settings(efx, ecmd); |
| } |
| |
| static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) |
| { |
| efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, |
| MDIO_AN_10GBT_CTRL_ADV10G, |
| advertising & ADVERTISED_10000baseT_Full); |
| } |
| |
| static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) |
| { |
| efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_CTRL, |
| 1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN, |
| advertising & ADVERTISED_1000baseT_Full); |
| efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, |
| MDIO_AN_10GBT_CTRL_ADV10G, |
| advertising & ADVERTISED_10000baseT_Full); |
| } |
| |
| struct efx_phy_operations falcon_sfx7101_phy_ops = { |
| .macs = EFX_XMAC, |
| .init = tenxpress_phy_init, |
| .reconfigure = tenxpress_phy_reconfigure, |
| .poll = tenxpress_phy_poll, |
| .fini = tenxpress_phy_fini, |
| .get_settings = tenxpress_get_settings, |
| .set_settings = tenxpress_set_settings, |
| .set_npage_adv = sfx7101_set_npage_adv, |
| .num_tests = ARRAY_SIZE(sfx7101_test_names), |
| .test_names = sfx7101_test_names, |
| .run_tests = sfx7101_run_tests, |
| .mmds = TENXPRESS_REQUIRED_DEVS, |
| .loopbacks = SFX7101_LOOPBACKS, |
| }; |
| |
| struct efx_phy_operations falcon_sft9001_phy_ops = { |
| .macs = EFX_GMAC | EFX_XMAC, |
| .init = tenxpress_phy_init, |
| .reconfigure = tenxpress_phy_reconfigure, |
| .poll = tenxpress_phy_poll, |
| .fini = tenxpress_phy_fini, |
| .get_settings = tenxpress_get_settings, |
| .set_settings = tenxpress_set_settings, |
| .set_npage_adv = sft9001_set_npage_adv, |
| .num_tests = ARRAY_SIZE(sft9001_test_names), |
| .test_names = sft9001_test_names, |
| .run_tests = sft9001_run_tests, |
| .mmds = TENXPRESS_REQUIRED_DEVS, |
| .loopbacks = SFT9001_LOOPBACKS, |
| }; |