diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cbb1826..60ca033 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -195,7 +195,8 @@
 	  The base address of exception vectors.
 
 config ARM_PATCH_PHYS_VIRT
-	bool "Patch physical to virtual translations at runtime"
+	bool "Patch physical to virtual translations at runtime" if EMBEDDED
+	default y
 	depends on !XIP_KERNEL && MMU
 	depends on !ARCH_REALVIEW || !SPARSEMEM
 	help
@@ -204,16 +205,25 @@
 	  kernel in system memory.
 
 	  This can only be used with non-XIP MMU kernels where the base
-	  of physical memory is at a 16MB boundary, or theoretically 64K
-	  for the MSM machine class.
+	  of physical memory is at a 16MB boundary.
 
-config ARM_PATCH_PHYS_VIRT_16BIT
-	def_bool y
-	depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+	  Only disable this option if you know that you do not require
+	  this feature (eg, building a kernel for a single machine) and
+	  you need to shrink the kernel to the minimal size.
+
+config NEED_MACH_MEMORY_H
+	bool
 	help
-	  This option extends the physical to virtual translation patching
-	  to allow physical memory down to a theoretical minimum of 64K
-	  boundaries.
+	  Select this when mach/memory.h is required to provide special
+	  definitions for this platform.  The need for mach/memory.h should
+	  be avoided when possible.
+
+config PHYS_OFFSET
+	hex "Physical address of main memory"
+	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+	help
+	  Please provide the physical address corresponding to the
+	  location of main memory in your system.
 
 source "init/Kconfig"
 
@@ -246,6 +256,7 @@
 	select GENERIC_CLOCKEVENTS
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_FPGA_IRQ
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for ARM's Integrator platform.
 
@@ -261,6 +272,7 @@
 	select PLAT_VERSATILE_CLCD
 	select ARM_TIMER_SP804
 	select GPIO_PL061 if GPIOLIB
+	select NEED_MACH_MEMORY_H
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -301,7 +313,6 @@
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
-	select ARM_PATCH_PHYS_VIRT if MMU
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -322,6 +333,7 @@
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
@@ -362,6 +374,7 @@
 	select ISA
 	select NO_IOPORT
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -377,6 +390,7 @@
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MEMORY_H
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -385,6 +399,7 @@
 	select CPU_SA110
 	select FOOTBRIDGE
 	select GENERIC_CLOCKEVENTS
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -434,6 +449,7 @@
 	select PCI
 	select ARCH_SUPPORTS_MSI
 	select VMSPLIT_1G
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -464,6 +480,7 @@
 	select CPU_XSC3
  	select PCI
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
 
@@ -473,6 +490,7 @@
 	select CPU_XSCALE
 	select PCI
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
@@ -566,6 +584,7 @@
 	select CPU_ARM922T
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
@@ -657,6 +676,7 @@
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
 	select PM_GENERIC_DOMAINS if PM
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
 
@@ -671,6 +691,7 @@
 	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -689,6 +710,7 @@
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for StrongARM 11x0 based boards.
 
@@ -781,6 +803,7 @@
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_MEMORY_H
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
@@ -797,6 +820,7 @@
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_MEMORY_H
 	help
 	  Samsung EXYNOS4 series based systems
 
@@ -808,6 +832,7 @@
 	select ZONE_DMA
 	select PCI
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -836,6 +861,7 @@
 	select HAVE_MACH_CLKDEV
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 70c424e..5665c2a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -128,6 +128,9 @@
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
+textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
+textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
+textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 7a21d0b..7f27fab 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -205,6 +205,13 @@
 int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
 		void *, dma_addr_t, size_t);
 
+/*
+ * This can be called during boot to increase the size of the consistent
+ * DMA region above it's default value of 2MB. It must be called before the
+ * memory allocator is initialised, i.e. before any core_initcall.
+ */
+extern void __init init_consistent_dma_size(unsigned long size);
+
 
 #ifdef CONFIG_DMABOUNCE
 /*
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 217aa191..727da11 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -17,7 +17,7 @@
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
 	const char		*name;		/* architecture name	*/
-	unsigned long		boot_params;	/* tagged list		*/
+	unsigned long		atag_offset;	/* tagged list (relative) */
 	const char		**dt_compat;	/* array of device tree
 						 * 'compatible' strings	*/
 
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index b8de516..a8997d7 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -16,9 +16,12 @@
 #include <linux/compiler.h>
 #include <linux/const.h>
 #include <linux/types.h>
-#include <mach/memory.h>
 #include <asm/sizes.h>
 
+#ifdef CONFIG_NEED_MACH_MEMORY_H
+#include <mach/memory.h>
+#endif
+
 /*
  * Allow for constants defined here to be used from assembly code
  * by prepending the UL suffix only with actual C code compilation.
@@ -77,16 +80,7 @@
  */
 #define IOREMAP_MAX_ORDER	24
 
-/*
- * Size of DMA-consistent memory region.  Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE 	SZ_2M
-#endif
-
 #define CONSISTENT_END		(0xffe00000UL)
-#define CONSISTENT_BASE		(CONSISTENT_END - CONSISTENT_DMA_SIZE)
 
 #else /* CONFIG_MMU */
 
@@ -160,7 +154,6 @@
  * so that all we need to do is modify the 8-bit constant field.
  */
 #define __PV_BITS_31_24	0x81000000
-#define __PV_BITS_23_16	0x00810000
 
 extern unsigned long __pv_phys_offset;
 #define PHYS_OFFSET __pv_phys_offset
@@ -178,9 +171,6 @@
 {
 	unsigned long t;
 	__pv_stub(x, t, "add", __PV_BITS_31_24);
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
-	__pv_stub(t, t, "add", __PV_BITS_23_16);
-#endif
 	return t;
 }
 
@@ -188,9 +178,6 @@
 {
 	unsigned long t;
 	__pv_stub(x, t, "sub", __PV_BITS_31_24);
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
-	__pv_stub(t, t, "sub", __PV_BITS_23_16);
-#endif
 	return t;
 }
 #else
@@ -200,7 +187,11 @@
 #endif
 
 #ifndef PHYS_OFFSET
+#ifdef PLAT_PHYS_OFFSET
 #define PHYS_OFFSET	PLAT_PHYS_OFFSET
+#else
+#define PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
+#endif
 #endif
 
 /*
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 543b449..6c6809f 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -31,11 +31,7 @@
 
 /* Add __virt_to_phys patching state as well */
 #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
-#define MODULE_ARCH_VERMAGIC_P2V "p2v16 "
-#else
 #define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
-#endif
 #else
 #define MODULE_ARCH_VERMAGIC_P2V ""
 #endif
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index bcd66e0..b7685f1 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 		@@ debug using ARM EmbeddedICE DCC channel
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		.endm
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
@@ -106,7 +106,7 @@
 
 #ifdef CONFIG_MMU
 		.macro	addruart_current, rx, tmp1, tmp2
-		addruart	\tmp1, \tmp2
+		addruart	\tmp1, \tmp2, \rx
 		mrc		p15, 0, \rx, c1, c0
 		tst		\rx, #1
 		moveq		\rx, \tmp1
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 742b610..673c806 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -95,7 +95,7 @@
 	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
 	add	r8, r8, r4			@ PHYS_OFFSET
 #else
-	ldr	r8, =PLAT_PHYS_OFFSET
+	ldr	r8, =PHYS_OFFSET		@ always constant in this case
 #endif
 
 	/*
@@ -234,7 +234,7 @@
 	 * This allows debug messages to be output
 	 * via a serial console before paging_init.
 	 */
-	addruart r7, r3
+	addruart r7, r3, r0
 
 	mov	r3, r3, lsr #20
 	mov	r3, r3, lsl #2
@@ -488,13 +488,8 @@
 	add	r5, r5, r3	@ adjust table end address
 	add	r7, r7, r3	@ adjust __pv_phys_offset address
 	str	r8, [r7]	@ save computed PHYS_OFFSET to __pv_phys_offset
-#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
 	mov	r6, r3, lsr #24	@ constant for add/sub instructions
 	teq	r3, r6, lsl #24 @ must be 16MiB aligned
-#else
-	mov	r6, r3, lsr #16	@ constant for add/sub instructions
-	teq	r3, r6, lsl #16	@ must be 64kiB aligned
-#endif
 THUMB(	it	ne		@ cross section branch )
 	bne	__error
 	str	r6, [r7, #4]	@ save to __pv_offset
@@ -510,20 +505,8 @@
 	.text
 __fixup_a_pv_table:
 #ifdef CONFIG_THUMB2_KERNEL
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
-	lsls	r0, r6, #24
-	lsr	r6, #8
-	beq	1f
-	clz	r7, r0
-	lsr	r0, #24
-	lsl	r0, r7
-	bic	r0, 0x0080
-	lsrs	r7, #1
-	orrcs   r0, #0x0080
-	orr	r0, r0, r7, lsl #12
-#endif
-1:	lsls	r6, #24
-	beq	4f
+	lsls	r6, #24
+	beq	2f
 	clz	r7, r6
 	lsr	r6, #24
 	lsl	r6, r7
@@ -532,43 +515,25 @@
 	orrcs	r6, #0x0080
 	orr	r6, r6, r7, lsl #12
 	orr	r6, #0x4000
-	b	4f
-2:	@ at this point the C flag is always clear
-	add     r7, r3
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
-	ldrh	ip, [r7]
-	tst	ip, 0x0400	@ the i bit tells us LS or MS byte
-	beq	3f
-	cmp	r0, #0		@ set C flag, and ...
-	biceq	ip, 0x0400	@ immediate zero value has a special encoding
-	streqh	ip, [r7]	@ that requires the i bit cleared
-#endif
-3:	ldrh	ip, [r7, #2]
+	b	2f
+1:	add     r7, r3
+	ldrh	ip, [r7, #2]
 	and	ip, 0x8f00
-	orrcc	ip, r6	@ mask in offset bits 31-24
-	orrcs	ip, r0	@ mask in offset bits 23-16
+	orr	ip, r6	@ mask in offset bits 31-24
 	strh	ip, [r7, #2]
-4:	cmp	r4, r5
+2:	cmp	r4, r5
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
-	bcc	2b
+	bcc	1b
 	bx	lr
 #else
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
-	and	r0, r6, #255	@ offset bits 23-16
-	mov	r6, r6, lsr #8	@ offset bits 31-24
-#else
-	mov	r0, #0		@ just in case...
-#endif
-	b	3f
-2:	ldr	ip, [r7, r3]
+	b	2f
+1:	ldr	ip, [r7, r3]
 	bic	ip, ip, #0x000000ff
-	tst	ip, #0x400	@ rotate shift tells us LS or MS byte
-	orrne	ip, ip, r6	@ mask in offset bits 31-24
-	orreq	ip, ip, r0	@ mask in offset bits 23-16
+	orr	ip, ip, r6	@ mask in offset bits 31-24
 	str	ip, [r7, r3]
-3:	cmp	r4, r5
+2:	cmp	r4, r5
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
-	bcc	2b
+	bcc	1b
 	mov	pc, lr
 #endif
 ENDPROC(__fixup_a_pv_table)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index e514c76..6136144 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -820,25 +820,8 @@
 
 	if (__atags_pointer)
 		tags = phys_to_virt(__atags_pointer);
-	else if (mdesc->boot_params) {
-#ifdef CONFIG_MMU
-		/*
-		 * We still are executing with a minimal MMU mapping created
-		 * with the presumption that the machine default for this
-		 * is located in the first MB of RAM.  Anything else will
-		 * fault and silently hang the kernel at this point.
-		 */
-		if (mdesc->boot_params < PHYS_OFFSET ||
-		    mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
-			printk(KERN_WARNING
-			       "Default boot params at physical 0x%08lx out of reach\n",
-			       mdesc->boot_params);
-		} else
-#endif
-		{
-			tags = phys_to_virt(mdesc->boot_params);
-		}
-	}
+	else if (mdesc->atag_offset)
+		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
 
 #if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 	/*
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index e04c5fb..1532b50 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 #include <linux/pm.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -319,6 +320,7 @@
 static void __init at91sam9g45_map_io(void)
 {
 	at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
+	init_consistent_dma_size(SZ_4M);
 }
 
 static void __init at91sam9g45_initialize(void)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c611b9..406bb64 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -128,8 +128,6 @@
 #define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
 #define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
 
-#define CONSISTENT_DMA_SIZE	SZ_4M
-
 /*
  * DMA peripheral identifiers
  * for hardware handshaking interface
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index bc1e0b2..0ed8648 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =(AT91_BASE_SYS + AT91_DBGU)	@ System peripherals (phys address)
 	ldr	\rv, =(AT91_VA_BASE_SYS	+ AT91_DBGU)	@ System peripherals (virt address)
 	.endm
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
index ed78aab..6ae20a6 100644
--- a/arch/arm/mach-bcmring/include/mach/hardware.h
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -22,7 +22,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <mach/memory.h>
 #include <cfg_global.h>
 #include <mach/csp/mm_io.h>
 
@@ -31,7 +30,7 @@
  *  *_SIZE  is the size of the region
  *  *_BASE  is the virtual address
  */
-#define RAM_START               PLAT_PHYS_OFFSET
+#define RAM_START               PHYS_OFFSET
 
 #define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
 #define RAM_BASE                PAGE_OFFSET
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
deleted file mode 100644
index 15162e4..0000000
--- a/arch/arm/mach-bcmring/include/mach/memory.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <cfg_global.h>
-
-/*
- * Physical vs virtual RAM address space conversion.  These are
- * private definitions which should NOT be used outside memory.h
- * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-
-#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
-
-/*
- * Maximum DMA memory allowed is 14M
- */
-#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
-
-#endif
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
index 0f1c37e..8616876 100644
--- a/arch/arm/mach-bcmring/mm.c
+++ b/arch/arm/mach-bcmring/mm.c
@@ -13,6 +13,7 @@
 *****************************************************************************/
 
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
@@ -53,4 +54,6 @@
 {
 
 	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+	/* Maximum DMA memory allowed is 14M */
+	init_consistent_dma_size(14 << 20);
 }
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 4a74b2c9..0276091 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,7 +64,7 @@
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")
 	/* Maintainer: Thomas Gleixner */
-	.boot_params	= 0xc0020000,
+	.atag_offset	= 0x20000,
 	.map_io		= autcpu12_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 5a1689d..25b3bfd 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,7 +55,7 @@
 
 MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	/* Maintainer: Ray Lehtiniemi */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= cdb89712_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 16481cf..1df9ec6 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,7 +56,7 @@
 
 MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
 	/* Maintainer: Rob Scott */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= ceiva_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 67b5abb4..06c8abd 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -37,7 +37,7 @@
 
 MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	/* Maintainer: Nobody */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x0100,
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 98ca5b2..abf522d 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -57,7 +57,7 @@
 
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	/* Maintainer: Jon McClintock */
-	.boot_params	= 0xc0020100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
+	.atag_offset	= 0x20100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
 	.fixup		= fixup_edb7211,
 	.map_io		= edb7211_map_io,
 	.reserve	= edb7211_reserve,
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index b1cb479..b6f7d86 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -75,7 +75,6 @@
 
 MACHINE_START(FORTUNET, "ARM-FortuNet")
 	/* Maintainer: FortuNet Inc. */
-	.boot_params	= 0x00000000,
 	.fixup		= fortunet_fixup,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 507c687..b802e8a 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
 		mov	\rp, #0x0000	@ UART1
 #else
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index cefbce0..e7f75ae 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -89,7 +89,7 @@
 
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.fixup		= fixup_p720t,
 	.map_io		= p720t_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 3e7d149..55f7b4b 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -197,7 +197,7 @@
 }
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.timer		= &cns3xxx_timer,
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index 56d8286..d04c150 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart,rp,rv
+		.macro	addruart,rp,rv,tmp
 		mov	\rp, #0x00009000
 		orr	\rv, \rp, #0xf0000000	@ virtual base
 		orr	\rp, \rp, #0x10000000
diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h
deleted file mode 100644
index dc16c5c..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-
-#define __phys_to_bus(x)	((x) + PHYS_OFFSET)
-#define __bus_to_phys(x)	((x) - PHYS_OFFSET)
-
-#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
-
-#endif
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 84fd786..26d94c0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -676,7 +676,7 @@
 }
 
 MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 008d514..6e41cb5 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1291,7 +1291,7 @@
 }
 
 MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 241a6bd..6556628 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,7 +351,7 @@
 }
 
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index bee284c..b307470 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,7 +270,7 @@
 }
 
 MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9818f21..04c43ab 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -612,7 +612,7 @@
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.boot_params	= (0x80000100),
+	.atag_offset	= 0x100,
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 95607a1..a005e769 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -712,7 +712,7 @@
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
-	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset  = 0x100,
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 993a3146..337c45e 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -792,7 +792,7 @@
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
@@ -801,7 +801,7 @@
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index c278226..6efc84cc 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -566,7 +566,7 @@
 }
 
 MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= mityomapl138_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index d60a800..38d6f64 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -272,7 +272,7 @@
 
 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 237332a..c6701e4 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -338,7 +338,7 @@
 }
 
 MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= omapl138_hawk_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5f4385c..5dd4da9 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,7 @@
 
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
-	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset  = 0x100,
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 7828920..90ee7b5 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -277,7 +277,7 @@
 #endif
 
 MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.boot_params	= (TNETV107X_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= tnetv107x_init,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 1d25573..865ffe5 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/etherdevice.h>
 #include <linux/davinci_emac.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
@@ -86,6 +87,8 @@
 		iotable_init(davinci_soc_info.io_desc,
 				davinci_soc_info.io_desc_num);
 
+	init_consistent_dma_size(14 << 20);
+
 	/*
 	 * Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index bd59f31..0b314bf 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,7 +19,7 @@
 #include <asm/proc-fns.h>
 
 #include <mach/cpuidle.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 
diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h
new file mode 100644
index 0000000..c19e047
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/ddr2.h
@@ -0,0 +1,4 @@
+#define DDR2_SDRCR_OFFSET	0xc
+#define DDR2_SRPD_BIT		(1 << 23)
+#define DDR2_MCLKSTOPEN_BIT	(1 << 30)
+#define DDR2_LPMODEN_BIT	(1 << 31)
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f8b7ea4..cf94552 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -18,56 +18,50 @@
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <mach/serial.h>
 
 #define UART_SHIFT	2
 
-#define davinci_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define davinci_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
 		.pushsection .data
 davinci_uart_phys:	.word	0
 davinci_uart_virt:	.word	0
 		.popsection
 
-		.macro addruart, rp, rv
+		.macro addruart, rp, rv, tmp
 
 		/* Use davinci_uart_phys/virt if already configured */
-10:		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =davinci_uart_v2p(davinci_uart_phys)
-		ldrne	\rp, =davinci_uart_phys
-		add	\rv, \rp, #4		@ davinci_uart_virt
-		ldr	\rp, [\rp, #0]
-		ldr	\rv, [\rv, #0]
+10:		adr	\rp, 99f		@ get effective addr of 99f
+		ldr	\rv, [\rp]		@ get absolute addr of 99f
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
+		sub	\tmp, \rp, \rv		@ make it effective
+		ldr	\rp, [\tmp, #0]		@ davinci_uart_phys
+		ldr	\rv, [\tmp, #4]		@ davinci_uart_virt
 		cmp	\rp, #0			@ is port configured?
 		cmpne	\rv, #0
-		bne	99f			@ already configured
+		bne	100f			@ already configured
 
 		/* Check the debug UART address set in uncompress.h */
-		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
+		and	\rp, pc, #0xff000000
+		ldr	\rv, =DAVINCI_UART_INFO_OFS
+		add	\rp, \rp, \rv
 
 		/* Copy uart phys address from decompressor uart info */
-		ldreq	\rv, =davinci_uart_v2p(davinci_uart_phys)
-		ldrne	\rv, =davinci_uart_phys
-		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
-		ldr	\rp, [\rp, #0]
-		str	\rp, [\rv]
+		ldr	\rv, [\rp, #0]
+		str	\rv, [\tmp, #0]
 
 		/* Copy uart virt address from decompressor uart info */
-		ldreq	\rv, =davinci_uart_v2p(davinci_uart_virt)
-		ldrne	\rv, =davinci_uart_virt
-		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
-		ldr	\rp, [\rp, #4]
-		str	\rp, [\rv]
+		ldr	\rv, [\rp, #4]
+		str	\rv, [\tmp, #4]
 
 		b	10b
-99:
+
+		.align
+99:		.word	.
+		.word	davinci_uart_phys
+		.ltorg
+
+100:
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
deleted file mode 100644
index 7873194..0000000
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * DaVinci memory space definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-#include <asm/page.h>
-#include <asm/sizes.h>
-
-/**************************************************************************
- * Definitions
- **************************************************************************/
-#define DAVINCI_DDR_BASE	0x80000000
-#define DA8XX_DDR_BASE		0xc0000000
-
-#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
-#error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
-#else
-#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
-#endif
-
-#define DDR2_SDRCR_OFFSET	0xc
-#define DDR2_SRPD_BIT		BIT(23)
-#define DDR2_MCLKSTOPEN_BIT	BIT(30)
-#define DDR2_LPMODEN_BIT	BIT(31)
-
-/*
- * Increase size of DMA-consistent memory region
- */
-#define CONSISTENT_DMA_SIZE (14<<20)
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index c9e6ce1..e347d88 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -21,8 +21,9 @@
  * macros in debug-macro.S.
  *
  * This area sits just below the page tables (see arch/arm/kernel/head.S).
+ * We define it as a relative offset from start of usable RAM.
  */
-#define DAVINCI_UART_INFO	(PLAT_PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO_OFS	0x3ff8
 
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 78d8068..9dc7cf9 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -43,7 +43,12 @@
 
 static inline void set_uart_info(u32 phys, void * __iomem virt)
 {
-	u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
+	/*
+	 * Get address of some.bss variable and round it down
+	 * a la CONFIG_AUTO_ZRELADDR.
+	 */
+	u32 ram_start = (u32)&uart & 0xf8000000;
+	u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
 
 	uart = (u32 *)phys;
 	uart_info[0] = phys;
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 5f1e045..d4e9316 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -22,7 +22,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/psc.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 03e11f9..c8a406f 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -87,7 +87,7 @@
 }
 
 MACHINE_START(CM_A510, "Compulab CM-A510 Board")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= cm_a510_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 2ac34ec..11ea34e 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,7 +94,7 @@
 }
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index da8bf2b..5929cbc 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =DOVE_SB_REGS_PHYS_BASE
 	ldr	\rv, =DOVE_SB_REGS_VIRT_BASE
 	orr	\rp, \rp, #0x00012000
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
deleted file mode 100644
index bbc93fe..0000000
--- a/arch/arm/mach-dove/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 087bc77..d0ce8ab 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -280,7 +280,7 @@
 
 MACHINE_START(EBSA110, "EBSA110")
 	/* Maintainer: Russell King */
-	.boot_params	= 0x00000400,
+	.atag_offset	= 0x400,
 	.reserve_lp0	= 1,
 	.reserve_lp2	= 1,
 	.soft_reboot	= 1,
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 7ef5690..bb02c05 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 **/
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0xf0000000
 		orr	\rp, \rp, #0x00000be0
 		mov	\rp, \rv
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 61b98ce..0713448 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,7 +33,7 @@
 
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 3f320c6..c63a5ec 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -241,7 +241,7 @@
 #ifdef CONFIG_MACH_EDB9301
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -252,7 +252,7 @@
 #ifdef CONFIG_MACH_EDB9302
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -263,7 +263,7 @@
 #ifdef CONFIG_MACH_EDB9302A
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -274,7 +274,7 @@
 #ifdef CONFIG_MACH_EDB9307
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -285,7 +285,7 @@
 #ifdef CONFIG_MACH_EDB9307A
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -296,7 +296,7 @@
 #ifdef CONFIG_MACH_EDB9312
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -307,7 +307,7 @@
 #ifdef CONFIG_MACH_EDB9315
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -318,7 +318,7 @@
 #ifdef CONFIG_MACH_EDB9315A
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9bd3152..45ee205 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,7 +33,7 @@
 
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index b25bc907..af54e43 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/ep93xx-regs.h>
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =EP93XX_APB_PHYS_BASE	@ Physical base
 		ldr	\rv, =EP93XX_APB_VIRT_BASE	@ virtual base
 		orr	\rp, \rp, #0x000c0000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 7adea62..e72f736 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,7 +77,7 @@
 #ifdef CONFIG_MACH_MICRO9H
 MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -88,7 +88,7 @@
 #ifdef CONFIG_MACH_MICRO9M
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -99,7 +99,7 @@
 #ifdef CONFIG_MACH_MICRO9L
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -110,7 +110,7 @@
 #ifdef CONFIG_MACH_MICRO9S
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 1a472ff..d6f286b 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -65,8 +65,8 @@
 }
 
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-/* Maintainer: Ryan Mallon */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	/* Maintainer: Ryan Mallon */
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 4f4b0b2..2b4d4b0 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -163,7 +163,7 @@
 
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	/* Maintainer: Ryan Mallon */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer 		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf4..1ade3c3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,7 +257,7 @@
 
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S
index a442ef8..6cacf16 100644
--- a/arch/arm/mach-exynos4/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rp, rv
+	.macro addruart, rp, rv, tmp
 		ldr	\rp, = S3C_PA_UART
 		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c
index b482c62..f0ca6c1 100644
--- a/arch/arm/mach-exynos4/mach-armlex4210.c
+++ b/arch/arm/mach-exynos4/mach-armlex4210.c
@@ -207,7 +207,7 @@
 
 MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
 	.init_machine	= armlex4210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b..6e05368 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -1152,7 +1152,7 @@
 
 MACHINE_START(NURI, "NURI")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
 	.init_machine	= nuri_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
index a7c65e0..b24ddd7 100644
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ b/arch/arm/mach-exynos4/mach-smdkc210.c
@@ -301,7 +301,7 @@
 
 MACHINE_START(SMDKC210, "SMDKC210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkc210_map_io,
 	.init_machine	= smdkc210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index ea41495..d90fcdd 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -255,7 +255,7 @@
 MACHINE_START(SMDKV310, "SMDKV310")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d89..2aac6f7 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -762,7 +762,7 @@
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
 	.init_machine	= universal_machine_init,
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 5b1a8db..a3da5d1 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,7 +86,7 @@
 
 MACHINE_START(CATS, "Chalice-CATS")
 	/* Maintainer: Philip Blundell */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.soft_reboot	= 1,
 	.fixup		= fixup_cats,
 	.map_io		= footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..012210c 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,7 +15,7 @@
 
 MACHINE_START(EBSA285, "EBSA285")
 	/* Maintainer: Russell King */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
 	.map_io		= footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 1be2eeb..e5acde2 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
 	/* For NetWinder debugging */
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x000003f8
 		orr	\rv, \rp, #0xff000000	@ virtual
 		orr	\rp, \rp, #0x7c000000	@ physical
@@ -31,7 +31,7 @@
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		.if	dc21285_low
 		mov	\rp, #dc21285_low
 		.else
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 06e514f..d8c1c92 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -648,7 +648,7 @@
 
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
 	.reserve_lp0	= 1,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index 3285e91..f41dba3 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,7 +15,7 @@
 
 MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
 	/* Maintainer: Jamey Hicks / George France */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 0cf7a07..5927d3c 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -102,7 +102,7 @@
 }
 
 MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
 	.timer		= &ib4220b_timer,
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index 4fa09af..cd7437a 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -86,7 +86,7 @@
 }
 
 MACHINE_START(RUT100, "Teltonika RUT100")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
 	.timer		= &rut1xx_timer,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 88cc422..a367880 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -129,7 +129,7 @@
 }
 
 MACHINE_START(WBD111, "Wiliboard WBD-111")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
 	.timer		= &wbd111_timer,
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 3a22034..f382811 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -129,7 +129,7 @@
 }
 
 MACHINE_START(WBD222, "Wiliboard WBD-222")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
 	.timer		= &wbd222_timer,
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index f40e006..8376707 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =GEMINI_UART_BASE			@ physical
 	ldr	\rv, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
 	.endm
diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h
deleted file mode 100644
index a50915f..0000000
--- a/arch/arm/mach-gemini/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#ifdef CONFIG_GEMINI_MEM_SWAP
-# define PLAT_PHYS_OFFSET	UL(0x00000000)
-#else
-# define PLAT_PHYS_OFFSET	UL(0x10000000)
-#endif
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 65f1bea..9886f19 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -29,7 +29,7 @@
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
 	/* Maintainer: Robert Schwebel, Pengutronix */
-	.boot_params	= 0xc0001000,
+	.atag_offset	= 0x1000,
 	.map_io		= h720x_map_io,
 	.init_irq	= h720x_init_irq,
 	.timer		= &h7201_timer,
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 884584a..284a134 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -71,7 +71,7 @@
 
 MACHINE_START(H7202, "Hynix HMS30C7202")
 	/* Maintainer: Robert Schwebel, Pengutronix */
-	.boot_params	= 0x40000100,
+	.atag_offset	= 0x100,
 	.map_io		= h720x_map_io,
 	.init_irq	= h7202_init_irq,
 	.timer		= &h7202_timer,
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index c2093e8..8a46157 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
 		.equ    io_virt, IO_VIRT
 		.equ    io_phys, IO_PHYS
 
-		.macro  addruart, rp, rv
+		.macro  addruart, rp, rv, tmp
 		mov     \rp, #0x00020000	@ UART1
 		add     \rv, \rp, #io_virt	@ virtual address
 		add     \rp, \rp, #io_phys	@ physical base address
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
deleted file mode 100644
index 96dcf50..0000000
--- a/arch/arm/mach-h720x/include/mach/memory.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x40000000)
-#endif
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ede2710..2152590 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -558,7 +558,7 @@
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index f851fe9..b1ec2cf 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -311,7 +311,7 @@
 };
 
 MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 4bd083b..470b654 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -194,7 +194,7 @@
 
 MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 2442d5d..9163318 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -163,7 +163,7 @@
 
 MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	/* Maintainer: Eukrea Electromatique */
-	.boot_params = MX25_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6778f81..22306ce 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -275,7 +275,7 @@
 };
 
 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 272f793..8da48b3 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -71,7 +71,7 @@
 
 MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index d81a769..21a14a2 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -77,7 +77,7 @@
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index e472a1d..7c20e9e 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -271,7 +271,7 @@
 };
 
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = kzm_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 5cd8bee..530ea08 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -145,7 +145,7 @@
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
-	.boot_params = MX1_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
@@ -154,7 +154,7 @@
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-	.boot_params = MX1_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d389ecf..e56828d 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -305,7 +305,7 @@
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX21_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx21ads_map_io,
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 7f66a91..dd25ee8 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -253,7 +253,7 @@
 
 MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX25_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6fa6934..2eafbac 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -421,7 +421,7 @@
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index e1addc1..635b050 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -344,7 +344,7 @@
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27ads_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 5750ca5..712a7fb 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -764,7 +764,7 @@
 
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 29ca890..910c456 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -535,7 +535,7 @@
 
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31ads_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31ads_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 126913a..e92eaf9 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -295,7 +295,7 @@
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 4b47fd9..5242cb78 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -280,7 +280,7 @@
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31lite_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index b358383..1d01ef2 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -567,7 +567,7 @@
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.reserve = mx31moboard_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index b3b9bd8..f2a873d 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -217,7 +217,7 @@
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index c85876f..5ec3989 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -267,7 +267,7 @@
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 71083aa..0f6bd11 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -435,7 +435,7 @@
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index f45b7cd..186d4eb 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -688,7 +688,7 @@
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.reserve = pcm037_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 2d6a64b..091bcf8 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -349,7 +349,7 @@
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 660ec3e..0a4d31d 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -418,7 +418,7 @@
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 3626f48..9e11359 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -262,7 +262,7 @@
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index db2d604..85d3284 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -137,7 +137,7 @@
 
 MACHINE_START(SCB9328, "Synertronixx scb9328")
 	/* Sascha Hauer */
-	.boot_params = 0x08000100,
+	.atag_offset = 100,
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index a1f598f..411b116 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x16000000	@ physical base address
 		mov	\rv, #0xf0000000	@ virtual base
 		add	\rv, \rv, #0x16000000 >> 4
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 8cdc730..a20fb3f 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -459,7 +459,7 @@
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.reserve	= integrator_reserve,
 	.map_io		= ap_map_io,
 	.init_early	= integrator_init_early,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4eb03ab..5de49c3 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -492,7 +492,7 @@
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.reserve	= integrator_reserve,
 	.map_io		= intcp_map_io,
 	.init_early	= intcp_init_early,
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index e664466..d869a6f 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	mov	\rp, #0x00002300
 	orr	\rp, \rp, #0x00000040
 	orr	\rv, \rp, #0xfe000000	@ virtual
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 23dfaff..4cf2cc4 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,7 +91,7 @@
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
 	.timer          = &iq81340mc_timer,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index df3492a..cd9e274 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,7 +93,7 @@
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
 	.timer          = &iq81340sc_timer,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 6cbffbf..4325055 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,7 +203,7 @@
 }
 
 MACHINE_START(EM7210, "Lanner EM7210")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= em7210_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &em7210_timer,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ceef5d4..0edc880 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,7 +207,7 @@
 
 MACHINE_START(GLANTANK, "GLAN Tank")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= glantank_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &glantank_timer,
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index ff9e76c..363bdf9 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0xfe000000	@ physical as well as virtual
 		orr	\rp, \rp, #0x00800000	@ location of the UART
 		mov	\rv, \rp
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
deleted file mode 100644
index 169cc23..0000000
--- a/arch/arm/mach-iop32x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 3a62514..9e7aacc 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,7 +313,7 @@
 
 MACHINE_START(IQ31244, "Intel IQ31244")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq31244_timer,
@@ -327,7 +327,7 @@
  */
 MACHINE_START(EP80219, "Intel EP80219")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq31244_timer,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 35b7e69..53ea86f 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,7 +186,7 @@
 
 MACHINE_START(IQ80321, "Intel IQ80321")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= iq80321_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq80321_timer,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 1a374ea..d726927 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,7 +327,7 @@
 
 MACHINE_START(N2100, "Thecus N2100")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= n2100_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &n2100_timer,
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index 40c500d..361be1f 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x00ff0000
 		orr	\rp, \rp, #0x0000f700
 		orr	\rv, #0xfe000000	@ virtual
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
deleted file mode 100644
index 8e1daf7..0000000
--- a/arch/arm/mach-iop33x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 637c027..9e14ccc 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,7 +141,7 @@
 
 MACHINE_START(IQ80331, "Intel IQ80331")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
 	.timer		= &iq80331_timer,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 90a0436..09c899a 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,7 +141,7 @@
 
 MACHINE_START(IQ80332, "Intel IQ80332")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
 	.timer		= &iq80332_timer,
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 62c60ad..af99945 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -254,7 +254,7 @@
 
 MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= enp2611_map_io,
 	.init_irq	= ixp2000_init_irq,
 	.timer		= &enp2611_timer,
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 0ef533b..bdd3ccd 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro  addruart, rp, rv
+		.macro  addruart, rp, rv, tmp
 		mov	\rp, #0x00030000
 #ifdef	__ARMEB__
 		orr	\rp, \rp, #0x00000003
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 5bad1a8..f7dfd97 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -171,7 +171,7 @@
 
 MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2400_init_irq,
 	.timer		= &ixdp2400_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 3d3cef8..d33bcac 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -286,7 +286,7 @@
 
 MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2800_init_irq,
 	.timer		= &ixdp2800_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index be2a254..61a2867 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -417,7 +417,7 @@
 #ifdef CONFIG_ARCH_IXDP2401
 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
@@ -428,7 +428,7 @@
 #ifdef CONFIG_ARCH_IXDP2801
 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
@@ -441,7 +441,7 @@
  */
 MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index e25e5fe..30dd316 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -88,6 +88,6 @@
 	.map_io		= ixp23xx_map_io,
 	.init_irq	= ixp23xx_init_irq,
 	.timer		= &ixp23xx_timer,
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= espresso_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index f7c6eef..5ff524c 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
  */
 #include <mach/ixp23xx.h>
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =IXP23XX_PERIPHERAL_PHYS 	@ physical
 		ldr	\rv, =IXP23XX_PERIPHERAL_VIRT	@ virtual
 #ifdef __ARMEB__
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index ec028e3..b3a57e0 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -331,6 +331,6 @@
 	.map_io		= ixdp2351_map_io,
 	.init_irq	= ixdp2351_init_irq,
 	.timer		= &ixp23xx_timer,
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp2351_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 844551d..8f4dcbb 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -175,6 +175,6 @@
 	.map_io		= ixp23xx_map_io,
 	.init_irq	= ixp23xx_init_irq,
 	.timer		= &ixp23xx_timer,
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= roadrunner_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index ee19c1d..37609a2 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= avila_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -185,7 +185,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= avila_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index e24564b..81dfec3 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= coyote_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -130,7 +130,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= coyote_init,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 96e3783..8837fbc 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -278,7 +278,7 @@
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 	/* Maintainer: www.nslu2-linux.org */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &dsmg600_timer,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 72333a0..2887c35 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -272,7 +272,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= fsg_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d4f851b..d69d1b0 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= gateway7001_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 7548d9a..bf6678d 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -499,7 +499,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= gmlr_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 3790dff..aa029fc 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= gtwx5715_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index b974a49..8c9f8d5 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
 #ifdef __ARMEB__
                 mov     \rp, #3         @ Uart regs are at off set of 3 if
 					@ byte writes used - Big Endian.
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
deleted file mode 100644
index 4caf176..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6a29279..f235f82 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -256,7 +256,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -270,7 +270,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -284,7 +284,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -298,7 +298,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index b752fa4..de716fa 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -313,7 +313,7 @@
 
 MACHINE_START(NAS100D, "Iomega NAS 100d")
 	/* Maintainer: www.nslu2-linux.org */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 0411a0a..ac81ccb 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -299,7 +299,7 @@
 
 MACHINE_START(NSLU2, "Linksys NSLU2")
 	/* Maintainer: www.nslu2-linux.org */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &nslu2_timer,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 045336c..27e469e 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= vulcan_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 40b9fad..b14144b 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= wg302v2_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 043cfd5..f457e07 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -221,7 +221,7 @@
 }
 
 MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= d2net_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index bff04e0..ff4c21c 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,7 +97,7 @@
 
 MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= db88f6281_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index f14dfb8..e4d199b 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -102,7 +102,7 @@
 }
 
 MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= dockstar_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 41d1b40..6c40f78 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,7 +121,7 @@
 
 MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
 	/* Maintainer: Siddarth Gore <gores@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= guruplug_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index db06ae43..f785d40 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =KIRKWOOD_REGS_PHYS_BASE
 	ldr	\rv, =KIRKWOOD_REGS_VIRT_BASE
 	orr	\rp, \rp, #0x00012000
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
deleted file mode 100644
index 4600b44..0000000
--- a/arch/arm/mach-kirkwood/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 00cca22..9a1e917 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,7 +163,7 @@
 
 MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= mv88f6281gtw_ge_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 7cdab57..8849bcc 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -258,7 +258,7 @@
 
 #ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -269,7 +269,7 @@
 
 #ifdef CONFIG_MACH_INETSPACE_V2
 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -280,7 +280,7 @@
 
 #ifdef CONFIG_MACH_NETSPACE_MAX_V2
 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 6be627d..1ba12c4 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -399,7 +399,7 @@
 
 #ifdef CONFIG_MACH_NET2BIG_V2
 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -410,7 +410,7 @@
 
 #ifdef CONFIG_MACH_NET5BIG_V2
 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index f69beef..5660ca6 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -214,7 +214,7 @@
 #ifdef CONFIG_MACH_OPENRD_BASE
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -226,7 +226,7 @@
 #ifdef CONFIG_MACH_OPENRD_CLIENT
 MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -238,7 +238,7 @@
 #ifdef CONFIG_MACH_OPENRD_ULTIMATE
 MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 75c6601..6663869 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,7 +79,7 @@
 
 MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f6192_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0f75494..66b3c05 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,7 +115,7 @@
 
 MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f6281_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 17de0bf..8b102d6 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -138,7 +138,7 @@
 #ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -149,7 +149,7 @@
 
 #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
 MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index e6b9b1b..ea104fb 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -201,7 +201,7 @@
 
 MACHINE_START(T5325, "HP t5325 Thin Client")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= hp_t5325_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 68f32f2..262c034 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -132,7 +132,7 @@
 
 MACHINE_START(TS219, "QNAP TS-119/TS-219")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= qnap_ts219_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index d5d0099..b68f5b4 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -176,7 +176,7 @@
 
 MACHINE_START(TS41X, "QNAP TS-41x")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= qnap_ts41x_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 3d7d114..a91f99d 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -223,7 +223,7 @@
 
 MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
 	/* Maintainer: Simtec Electronics. */
-	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= acs5k_init,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index c3c867a..d24bcef 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -121,7 +121,7 @@
 
 MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
 	/* Maintainer: Simtec Electronics. */
-	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= dsm320_init,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 9b9c47c..16c9565 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -53,7 +53,7 @@
 
 MACHINE_START(KS8695, "KS8695 Centaur Development Board")
 	/* Maintainer: Micrel Semiconductor Inc. */
-	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= micrel_init,
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index bf516ad..a79e489 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 		ldr	\rp, =KS8695_UART_PA		@ physical base address
 		ldr	\rv, =KS8695_UART_VA		@ virtual base address
 	.endm
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index b0a2db7..0b4e760 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 		.equ	io_virt, IO_BASE
 		.equ	io_phys, IO_START
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x00044000	@ UART1
 @		mov	\rp, #0x00045000	@ UART2
 		add	\rv, \rp, #io_virt	@ virtual address
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 629e744..351bd6c 100644
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
  * Debug output is hardcoded to standard UART 5
 */
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldreq	\rp, =0x40090000
 	ldrne	\rv, =0xF4090000
 	.endm
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
deleted file mode 100644
index a647dd6..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/memory.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset of bank 0
- */
-#define PLAT_PHYS_OFFSET	UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index c3a22fd..6d2f0d1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -383,7 +383,7 @@
 
 MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
 	/* Maintainer: Kevin Wells, NXP Semiconductors */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= lpc32xx_map_io,
 	.init_irq	= lpc32xx_init_irq,
 	.timer		= &lpc32xx_timer,
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 7e2ebd3..b6f14d2 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <mach/addr-map.h>
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =APB_PHYS_BASE		@ physical
 		ldr	\rv, =APB_VIRT_BASE		@ virtual
 		orr	\rp, \rp, #0x00017000
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
deleted file mode 100644
index d68b50a..0000000
--- a/arch/arm/mach-mmp/include/mach/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_MEMORY_H
-#define __ASM_MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 18a3c97..16c86f8 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -93,7 +93,7 @@
 }
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.fixup		= halibut_fixup,
 	.map_io		= halibut_map_io,
 	.init_irq	= halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 7a9a03e..8a1672e 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -74,7 +74,7 @@
 extern struct sys_timer msm_timer;
 
 MACHINE_START(MAHIMAHI, "mahimahi")
-	.boot_params	= 0x20000100,
+	.atag_offset	= 0x100,
 	.fixup		= mahimahi_fixup,
 	.map_io		= mahimahi_map_io,
 	.init_irq	= msm_init_irq,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index 1a313e1..6d84ee7 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -129,7 +129,7 @@
 }
 
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -137,7 +137,7 @@
 MACHINE_END
 
 MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -145,7 +145,7 @@
 MACHINE_END
 
 MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -153,7 +153,7 @@
 MACHINE_END
 
 MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 92afaf6..71de506 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -24,6 +24,7 @@
 #include <linux/smsc911x.h>
 #include <linux/usb/msm_hsusb.h>
 #include <linux/clkdev.h>
+#include <linux/memblock.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +42,21 @@
 
 extern struct sys_timer msm_timer;
 
+static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
+			 char **cmdline, struct meminfo *mi)
+{
+	for (; tag->hdr.size; tag = tag_next(tag))
+		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
+			tag->u.mem.start = 0;
+			tag->u.mem.size += SZ_2M;
+		}
+}
+
+static void __init msm7x30_reserve(void)
+{
+	memblock_remove(0x0, SZ_2M);
+}
+
 static int hsusb_phy_init_seq[] = {
 	0x30, 0x32,	/* Enable and set Pre-Emphasis Depth to 20% */
 	0x02, 0x36,	/* Disable CDR Auto Reset feature */
@@ -105,7 +121,9 @@
 }
 
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
+	.fixup = msm7x30_fixup,
+	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
@@ -113,7 +131,9 @@
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
+	.fixup = msm7x30_fixup,
+	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
@@ -121,7 +141,9 @@
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
+	.fixup = msm7x30_fixup,
+	.reserve = msm7x30_reserve,
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index 35c7cee..b04468e 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -20,16 +20,34 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/clkdev.h>
+#include <linux/memblock.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
+#include <asm/setup.h>
 
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
 #include "devices.h"
 
+static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
+			 char **cmdline, struct meminfo *mi)
+{
+	for (; tag->hdr.size; tag = tag_next(tag))
+		if (tag->hdr.tag == ATAG_MEM &&
+				tag->u.mem.start == 0x40200000) {
+			tag->u.mem.start = 0x40000000;
+			tag->u.mem.size += SZ_2M;
+		}
+}
+
+static void __init msm8960_reserve(void)
+{
+	memblock_remove(0x40000000, SZ_2M);
+}
+
 static void __init msm8960_map_io(void)
 {
 	msm_map_msm8960_io();
@@ -76,6 +94,8 @@
 }
 
 MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
+	.fixup = msm8960_fixup,
+	.reserve = msm8960_reserve,
 	.map_io = msm8960_map_io,
 	.init_irq = msm8960_init_irq,
 	.timer = &msm_timer,
@@ -83,6 +103,8 @@
 MACHINE_END
 
 MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
+	.fixup = msm8960_fixup,
+	.reserve = msm8960_reserve,
 	.map_io = msm8960_map_io,
 	.init_irq = msm8960_init_irq,
 	.timer = &msm_timer,
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 1163b6f..9221f54 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -20,14 +20,31 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/memblock.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
+#include <asm/setup.h>
 
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
+static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
+			 char **cmdline, struct meminfo *mi)
+{
+	for (; tag->hdr.size; tag = tag_next(tag))
+		if (tag->hdr.tag == ATAG_MEM &&
+				tag->u.mem.start == 0x40200000) {
+			tag->u.mem.start = 0x40000000;
+			tag->u.mem.size += SZ_2M;
+		}
+}
+
+static void __init msm8x60_reserve(void)
+{
+	memblock_remove(0x40000000, SZ_2M);
+}
 
 static void __init msm8x60_map_io(void)
 {
@@ -65,6 +82,8 @@
 }
 
 MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
+	.fixup = msm8x60_fixup,
+	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
 	.init_machine = msm8x60_init,
@@ -72,6 +91,8 @@
 MACHINE_END
 
 MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
+	.fixup = msm8x60_fixup,
+	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
 	.init_machine = msm8x60_init,
@@ -79,6 +100,8 @@
 MACHINE_END
 
 MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
+	.fixup = msm8x60_fixup,
+	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
 	.init_machine = msm8x60_init,
@@ -86,6 +109,8 @@
 MACHINE_END
 
 MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
+	.fixup = msm8x60_fixup,
+	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
 	.init_machine = msm8x60_init,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 24e9b89..7e8909c 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -192,7 +192,7 @@
 }
 
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
@@ -200,7 +200,7 @@
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 863394c..afa9293 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -104,7 +104,7 @@
 
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-	.boot_params    = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset    = 0x100,
 	.fixup          = sapphire_fixup,
 	.map_io         = sapphire_map_io,
 	.init_irq       = sapphire_init_irq,
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 8143867..22d5694 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -93,7 +93,7 @@
 }
 
 MACHINE_START(TROUT, "HTC Dream")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.fixup		= trout_fixup,
 	.map_io		= trout_map_io,
 	.init_irq	= trout_init_irq,
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 646b99e..2dc73cc 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
 #include <mach/msm_iomap.h>
 
 #if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =MSM_DEBUG_UART_PHYS
 	ldr	\rv, =MSM_DEBUG_UART_BASE
 	.endm
@@ -37,7 +37,7 @@
 	beq	1001b
 	.endm
 #else
-	.macro  addruart, rp, rv
+	.macro  addruart, rp, rv, tmp
 	mov	\rv, #0xff000000
 	orr	\rv, \rv, #0x00f00000
 	.endm
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
deleted file mode 100644
index f2f8d29..0000000
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/mach-msm/include/mach/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-#elif defined(CONFIG_ARCH_QSD8X50)
-#define PLAT_PHYS_OFFSET		UL(0x20000000)
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define PLAT_PHYS_OFFSET		UL(0x00200000)
-#elif defined(CONFIG_ARCH_MSM8X60)
-#define PLAT_PHYS_OFFSET		UL(0x40200000)
-#elif defined(CONFIG_ARCH_MSM8960)
-#define PLAT_PHYS_OFFSET		UL(0x40200000)
-#else
-#define PLAT_PHYS_OFFSET		UL(0x10000000)
-#endif
-
-#endif
-
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 20f3f12..0e94268 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,7 +145,7 @@
 
 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= wxl_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index df5aebe..50b85ae 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,7 +93,7 @@
 
 MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= db78x00_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index 04891428..a7df02b 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/mv78xx0.h>
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =MV78XX0_REGS_PHYS_BASE
 	ldr	\rv, =MV78XX0_REGS_VIRT_BASE
 	orr	\rp, \rp, #0x00012000
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
deleted file mode 100644
index a648c51..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d927f14..e85222e 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,7 +78,7 @@
 
 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd78x00_masa_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 68934ea..e01af94 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -293,7 +293,7 @@
 
 MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ff096d5..b41fc27 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -331,7 +331,7 @@
 
 MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 07a3815..a50174e 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -169,7 +169,7 @@
 
 MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 11b0ff6..468926a 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -416,7 +416,7 @@
 
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 551daf8..c36880d 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -280,7 +280,7 @@
 
 MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 8a9bca2..ba5436a 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -266,7 +266,7 @@
 };
 
 MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 79650a1..714570d 100644
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -30,7 +30,7 @@
 
 #define UART_VADDR	MXS_IO_ADDRESS(UART_PADDR)
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =UART_PADDR	@ physical
 		ldr	\rv, =UART_VADDR	@ virtual
 		.endm
diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h
deleted file mode 100644
index b5420a5..0000000
--- a/arch/arm/mach-mxs/include/mach/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_MEMORY_H__
-#define __MACH_MXS_MEMORY_H__
-
-#define PHYS_OFFSET		UL(0x40000000)
-
-#endif /* __MACH_MXS_MEMORY_H__ */
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 56a9152..247781e 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x00000a00
 		orr	\rv, \rp, #io_p2v(0x00100000)	@ virtual
 		orr	\rp, \rp, #0x00100000		@ physical
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
deleted file mode 100644
index 5956149..0000000
--- a/arch/arm/mach-netx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/mach-netx/include/mach/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
-
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index ca8b203..90903dd 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,7 +200,7 @@
 }
 
 MACHINE_START(NXDB500, "Hilscher nxdb500")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
 	.timer		= &netx_timer,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index d775cbe..c63384a 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,7 +93,7 @@
 }
 
 MACHINE_START(NXDKN, "Hilscher nxdkn")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
 	.timer		= &netx_timer,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index de369cd..8f548ec 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,7 +177,7 @@
 }
 
 MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
 	.timer		= &netx_timer,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 97d7186..0cbb74c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -277,7 +277,7 @@
 
 MACHINE_START(NOMADIK, "NHK8815")
 	/* Maintainer: ST MicroElectronics */
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= cpu8815_map_io,
 	.init_irq	= cpu8815_init_irq,
 	.timer		= &nomadik_timer,
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e7151b4..7354179 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  *
 */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x00100000
 		add	\rp, \rp, #0x000fb000
 		add	\rv, \rp, #0xf0000000	@ virtual base
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
deleted file mode 100644
index d332521..0000000
--- a/arch/arm/mach-nomadik/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  mach-nomadik/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
deleted file mode 100644
index ef9864b..0000000
--- a/arch/arm/mach-nuc93x/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
index d702570..1f741b1 100644
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -35,7 +35,6 @@
 
 MACHINE_START(NUC932EVB, "NUC932EVB")
 	/* Maintainer: Wan ZongShun */
-	.boot_params	= 0,
 	.map_io		= nuc932evb_map_io,
 	.init_irq	= nuc93x_init_irq,
 	.init_machine	= nuc932evb_init,
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index d86e9af2..4ea60e2 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -385,7 +385,7 @@
 
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= ams_delta_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index dd814b3..31e089b 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -388,7 +388,7 @@
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_fsample_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 8f7d115..05c6e9d 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -93,7 +93,7 @@
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_generic_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 0796ad7..c2e2791 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -460,7 +460,7 @@
 
 MACHINE_START(OMAP_H2, "TI-H2")
 	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= h2_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index fe1814c..8f5b6af 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -448,7 +448,7 @@
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	/* Maintainer: Texas Instruments, Inc. */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= h3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 4af7bfa..fcd1a3c 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -610,7 +610,7 @@
 MACHINE_START(HERALD, "HTC Herald")
 	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
 	/* Maintainer: wing-linux.sourceforge.net */
-	.boot_params    = 0x10000100,
+	.atag_offset    = 0x100,
 	.map_io         = htcherald_map_io,
 	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index e603e5e..c2234ca 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -458,7 +458,7 @@
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= innovator_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 8420535..02789c5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -263,7 +263,7 @@
 }
 
 MACHINE_START(NOKIA770, "Nokia 770")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_nokia770_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index bf1ebe5..e4dca1d 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -582,7 +582,7 @@
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= osk_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 45596b5..50c4e39 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -274,7 +274,7 @@
 }
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_palmte_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index f942221..273771c 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,7 +321,7 @@
 }
 
 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_palmtt_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 2b912d4..de36ade 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -341,7 +341,7 @@
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_palmz71_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmz71_init_irq,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 7e2efe5..04b1bef 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -349,7 +349,7 @@
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_perseus2_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 172a28f..2bea941 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -420,7 +420,7 @@
 }
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_sx1_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_sx1_init_irq,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 236b7de..940faed 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -301,7 +301,7 @@
 
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= voiceblue_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 6285604..2b36a28 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,13 +13,8 @@
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <plat/serial.h>
 
-#define omap_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
 		.pushsection .data
 omap_uart_phys:	.word	0x0
 omap_uart_virt:	.word	0x0
@@ -31,26 +26,24 @@
 		 * the desired UART phys and virt addresses temporarily into
 		 * the omap_uart_phys and omap_uart_virt above.
 		 */
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 
 		/* Use omap_uart_phys/virt if already configured */
-9:		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
-		ldrne	\rp, =omap_uart_phys	@ MMU enabled
-		add	\rv, \rp, #4		@ omap_uart_virt
-		ldr	\rp, [\rp, #0]
-		ldr	\rv, [\rv, #0]
+9:		adr	\rp, 99f		@ get effective addr of 99f
+		ldr	\rv, [\rp]		@ get absolute addr of 99f
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
+		sub	\tmp, \rp, \rv		@ make it effective
+		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
+		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
 		cmp	\rp, #0			@ is port configured?
 		cmpne	\rv, #0
-		bne	99f			@ already configured
+		bne	100f			@ already configured
 
 		/* Check the debug UART configuration set in uncompress.h */
-		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
-		ldrne	\rp, =omap_uart_p2v(OMAP_UART_INFO)	@ MMU enabled
-		ldr	\rp, [\rp, #0]
+		and	\rp, pc, #0xff000000
+		ldr	\rv, =OMAP_UART_INFO_OFS
+		ldr	\rp, [\rp, \rv]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
 10:		cmp	\rp, #0			@ no port configured?
@@ -74,17 +67,18 @@
 
 		/* Store both phys and virt address for the uart */
 98:		add	\rp, \rp, #0xff000000	@ phys base
-		mrc	p15, 0, \rv, c1, c0
-		tst	\rv, #1			@ MMU enabled?
-		ldreq	\rv, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
-		ldrne	\rv, =omap_uart_phys	@ MMU enabled
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #0]		@ omap_uart_phys
 		sub	\rp, \rp, #0xff000000	@ phys base
 		add	\rp, \rp, #0xfe000000	@ virt base
-		add	\rv, \rv, #4		@ omap_uart_lsr
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #4]		@ omap_uart_virt
 		b	9b
-99:
+
+		.align
+99:		.word	.
+		.word	omap_uart_phys
+		.ltorg
+
+100:
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index e9b600c..c633764 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -2,4 +2,55 @@
  * arch/arm/mach-omap1/include/mach/memory.h
  */
 
-#include <plat/memory.h>
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PLAT_PHYS_OFFSET		UL(0x10000000)
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	UL(0x30000000)
+
+#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
+
+#define __arch_pfn_to_dma(dev, pfn)	\
+	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
+	   if (is_lbus_device(dev)) \
+		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+	   __dma; })
+
+#define __arch_dma_to_pfn(dev, addr)	\
+	({ dma_addr_t __dma = addr;				\
+	   if (is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
+	   __phys_to_pfn(__dma);				\
+	})
+
+#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
+						lbus_to_virt(addr) : \
+						__phys_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
+					   (dma_addr_t) (is_lbus_device(dev) ? \
+						virt_to_lbus(__addr) : \
+						__virt_to_phys(__addr)); })
+
+#endif	/* CONFIG_ARCH_OMAP15XX */
+
+#endif
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 870886a..1cfa1b6 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -121,6 +121,7 @@
 #endif
 
 	omap_sram_init();
+	omap_init_consistent_dma_size();
 }
 
 /*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index f79b7d2..87f43ad 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -257,7 +257,7 @@
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_2430sdp_map_io,
 	.init_early	= omap_2430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd600cf..2430531 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -729,7 +729,7 @@
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_3430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index e4f37b5..8b5b5aa 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -215,7 +215,7 @@
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 9e423ac..e749c95 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -838,7 +838,7 @@
 
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_4430sdp_map_io,
 	.init_early	= omap_4430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 933e935..db110fd 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -98,7 +98,7 @@
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_crane_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f3006c3..1325085 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -490,7 +490,7 @@
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_evm_init_early,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7021170..67800e6 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -350,7 +350,7 @@
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_apollon_map_io,
 	.init_early	= omap_apollon_init_early,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 3af8aab..38179c1 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -634,7 +634,7 @@
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t35_init_early,
@@ -644,7 +644,7 @@
 MACHINE_END
 
 MACHINE_START(CM_T3730, "Compulab CM-T3730")
-	.boot_params    = 0x80000100,
+	.atag_offset    = 0x100,
 	.reserve        = omap_reserve,
 	.map_io         = omap3_map_io,
 	.init_early     = cm_t35_init_early,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 05c72f4..aed9c29 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -299,7 +299,7 @@
 }
 
 MACHINE_START(CM_T3517, "Compulab CM-T3517")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve        = omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t3517_init_early,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index b6002ec..99a4243 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -667,7 +667,7 @@
 }
 
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= devkit8000_init_early,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index bb4af05..4431ad3 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -65,7 +65,7 @@
 /* XXX This machine entry name should be updated */
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_generic_map_io,
 	.init_early	= omap_generic_init_early,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 95319e7..82421a4 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -381,7 +381,7 @@
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_h4_map_io,
 	.init_early	= omap_h4_init_early,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 35be778..7040352 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -672,7 +672,7 @@
 }
 
 MACHINE_START(IGEP0020, "IGEP v2 board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
@@ -682,7 +682,7 @@
 MACHINE_END
 
 MACHINE_START(IGEP0030, "IGEP OMAP3 module")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ddff45c..abe8c7e 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -332,7 +332,7 @@
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_ldp_init_early,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e11f0c5..6ce7481 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -695,7 +695,7 @@
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
@@ -705,7 +705,7 @@
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
@@ -715,7 +715,7 @@
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..1fde8a0 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -557,7 +557,7 @@
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_beagle_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c452b3f..15c69a0 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -681,7 +681,7 @@
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_evm_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 703aeb5..01354a2 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -209,7 +209,7 @@
 }
 
 MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
 	.init_irq	= omap3_init_irq,
@@ -218,7 +218,7 @@
 MACHINE_END
 
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
 	.init_irq	= omap3_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 080d7bd..ace56938 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -606,7 +606,7 @@
 }
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3pandora_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8e10498..ba13e1d 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -494,7 +494,7 @@
 
 MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
-	.boot_params		= 0x80000100,
+	.atag_offset		= 0x100,
 	.map_io			= omap3_map_io,
 	.init_early		= omap3_stalker_init_early,
 	.init_irq		= omap3_stalker_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 852ea04..49e4bd2 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -404,7 +404,7 @@
 
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_touchbook_init_early,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..683bede 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -583,7 +583,7 @@
 
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	/* Maintainer: David Anders - Texas Instruments Inc */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap4_panda_map_io,
 	.init_early	= omap4_panda_init_early,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f949a99..e592fb1 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -561,7 +561,7 @@
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= overo_init_early,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 7dfed24..9a8ce23 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -153,7 +153,7 @@
 }
 
 MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= rm680_map_io,
 	.init_early	= rm680_init_early,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 5ea142f..a6c473b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -156,7 +156,7 @@
 
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index a85d5b0..e41958a 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -48,7 +48,7 @@
 
 MACHINE_START(TI8168EVM, "ti8168evm")
 	/* Maintainer: Texas Instruments */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= ti8168_evm_map_io,
 	.init_early	= ti8168_init_early,
 	.init_irq	= ti816x_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 8a98c3c..72f1db4 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -133,7 +133,7 @@
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
@@ -143,7 +143,7 @@
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 48adfe9..13f98e5 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,15 +13,10 @@
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <plat/serial.h>
 
 #define UART_OFFSET(addr)	((addr) & 0x00ffffff)
 
-#define omap_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
 		.pushsection .data
 omap_uart_phys:	.word	0
 omap_uart_virt:	.word	0
@@ -34,26 +29,25 @@
 		 * the desired UART phys and virt addresses temporarily into
 		 * the omap_uart_phys and omap_uart_virt above.
 		 */
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 
 		/* Use omap_uart_phys/virt if already configured */
-10:		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
-		ldrne	\rp, =omap_uart_phys	@ MMU enabled
-		add	\rv, \rp, #4		@ omap_uart_virt
-		ldr	\rp, [\rp, #0]
-		ldr	\rv, [\rv, #0]
+10:		adr	\rp, 99f		@ get effective addr of 99f
+		ldr	\rv, [\rp]		@ get absolute addr of 99f
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
+		sub	\tmp, \rp, \rv		@ make it effective
+		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
+		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
 		cmp	\rp, #0			@ is port configured?
 		cmpne	\rv, #0
-		bne	99f			@ already configured
+		bne	100f			@ already configured
 
 		/* Check the debug UART configuration set in uncompress.h */
-		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
-		ldrne	\rp, =omap_uart_p2v(OMAP_UART_INFO)	@ MMU enabled
-		ldr	\rp, [\rp, #0]
+		mov	\rp, pc
+		ldr	\rv, =OMAP_UART_INFO_OFS
+		and	\rp, \rp, #0xff000000
+		ldr	\rp, [\rp, \rv]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
 		cmp	\rp, #0			@ no port configured?
@@ -106,50 +100,47 @@
 		b	98f
 83:		mov	\rp, #UART_OFFSET(TI816X_UART3_BASE)
 		b	98f
+
 95:		ldr	\rp, =ZOOM_UART_BASE
-		mrc	p15, 0, \rv, c1, c0
-		tst	\rv, #1			@ MMU enabled?
-		ldreq	\rv, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
-		ldrne	\rv, =omap_uart_phys	@ MMU enabled
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #0]		@ omap_uart_phys
 		ldr	\rp, =ZOOM_UART_VIRT
-		add	\rv, \rv, #4		@ omap_uart_virt
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #4]		@ omap_uart_virt
 		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
-		add	\rv, \rv, #4		@ omap_uart_lsr
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #8]		@ omap_uart_lsr
 		b	10b
 
 		/* Store both phys and virt address for the uart */
 98:		add	\rp, \rp, #0x48000000	@ phys base
-		mrc	p15, 0, \rv, c1, c0
-		tst	\rv, #1			@ MMU enabled?
-		ldreq	\rv, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
-		ldrne	\rv, =omap_uart_phys	@ MMU enabled
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #0]		@ omap_uart_phys
 		sub	\rp, \rp, #0x48000000	@ phys base
 		add	\rp, \rp, #0xfa000000	@ virt base
-		add	\rv, \rv, #4		@ omap_uart_virt
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #4]		@ omap_uart_virt
 		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
-		add	\rv, \rv, #4		@ omap_uart_lsr
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #8]		@ omap_uart_lsr
 
 		b	10b
-99:
+
+		.align
+99:		.word	.
+		.word	omap_uart_phys
+		.ltorg
+
+100:		/* Pass the UART_LSR reg address */
+		ldr	\tmp, [\tmp, #8]	@ omap_uart_lsr
+		add	\rp, \rp, \tmp
+		add	\rv, \rv, \tmp
 		.endm
 
 		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
+		orr	\rd, \rd, \rx, lsl #24	@ preserve LSR reg offset
+		bic	\rx, \rx, #0xff		@ get base (THR) reg address
+		strb	\rd, [\rx]		@ send lower byte of rd
+		orr	\rx, \rx, \rd, lsr #24	@ restore original rx (LSR)
+		bic	\rd, \rd, #(0xff << 24)	@ restore original rd
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1			@ MMU enabled?
-		ldreq	\rd, =omap_uart_v2p(omap_uart_lsr)	@ MMU disabled
-		ldrne	\rd, =omap_uart_lsr	@ MMU enabled
-		ldr	\rd, [\rd, #0]
-		ldrb	\rd, [\rx, \rd]
+1001:		ldrb	\rd, [\rx]		@ rx contains UART_LSR address
 		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		bne	1001b
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
deleted file mode 100644
index ca6d32a..0000000
--- a/arch/arm/mach-omap2/include/mach/memory.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/memory.h
- */
-
-#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2ce1ce6..d6d01cb 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -16,7 +16,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -250,6 +249,7 @@
 
 	omap2_check_revision();
 	omap_sram_init();
+	omap_init_consistent_dma_size();
 }
 
 #ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 19cf5bf..8c83009 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,7 +336,7 @@
 
 #ifdef CONFIG_MACH_D2NET
 MACHINE_START(D2NET, "LaCie d2 Network")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
@@ -348,7 +348,7 @@
 
 #ifdef CONFIG_MACH_BIGDISK
 MACHINE_START(BIGDISK, "LaCie Big Disk Network")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 6d771cb..4b79a80 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -358,7 +358,7 @@
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 6fb4908..343f60e 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -729,7 +729,7 @@
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= dns323_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b67cff0..70a4e92 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,7 +251,7 @@
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
 	/* Maintainer: Christopher Moore <moore@free.fr> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= edmini_v2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 5e3bf5b..f340ed8 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 
 #include <mach/orion5x.h>
 
-	.macro  addruart, rp, rv
+	.macro  addruart, rp, rv, tmp
 	ldr	\rp, =ORION5X_REGS_PHYS_BASE
 	ldr	\rv, =ORION5X_REGS_VIRT_BASE
 	orr	\rp, \rp, #0x00012000
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
deleted file mode 100644
index 6769917..0000000
--- a/arch/arm/mach-orion5x/include/mach/memory.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f88f54b..d3cd3f6 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -379,7 +379,7 @@
 #ifdef CONFIG_MACH_KUROBOX_PRO
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
@@ -392,7 +392,7 @@
 #ifdef CONFIG_MACH_LINKSTATION_PRO
 MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 5065803..9503fff 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -318,7 +318,7 @@
 
 MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
 	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= lschl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8503d0a..ed6d772 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,7 +265,7 @@
 
 MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
 	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= ls_hgl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 9c82723..743f7f1 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,7 +267,7 @@
 #ifdef CONFIG_MACH_LINKSTATION_MINI
 MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
 	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= lsmini_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index ef3bb8e..6020e26b 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,7 +261,7 @@
 
 MACHINE_START(MSS2, "Maxtor Shared Storage II")
 	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= mss2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 525eb12..201ae36 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -228,7 +228,7 @@
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(MV2120, "HP Media Vault mv2120")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= mv2120_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index e43b39c..6197c79 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,7 +419,7 @@
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(NET2BIG, "LaCie 2Big Network")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= net2big_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 50aae6f..ebd6767 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -168,7 +168,7 @@
 
 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
 	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f5181l_fxo_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 35f106a..05db2d3 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -180,7 +180,7 @@
 
 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f5181l_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 9bb2b8b..e47fa05 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -305,7 +305,7 @@
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f5182_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 1d00df9..6431725 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -121,7 +121,7 @@
 
 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f6183ap_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index c9dd31d..29f1526 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -357,7 +357,7 @@
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= tsp2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 764307b..31e51f9 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -322,7 +322,7 @@
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= qnap_ts209_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 0572dd1..0fbcc14 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -311,7 +311,7 @@
 
 MACHINE_START(TS409, "QNAP TS-409")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= qnap_ts409_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6b7b541..6c75cd3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -621,7 +621,7 @@
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
 	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= ts78xx_init,
 	.map_io		= ts78xx_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index cdad50b..b8be7d8 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -172,7 +172,7 @@
 
 MACHINE_START(WNR854T, "Netgear WNR854T")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= wnr854t_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 8f10ffd..faf81a0 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -260,7 +260,7 @@
 
 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= wrt350n_v2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 63399755..cdb95e7 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,7 +264,7 @@
 
 MACHINE_START(PNX4008, "Philips PNX4008")
 	/* Maintainer: MontaVista Software Inc. */
-	.boot_params		= 0x80000100,
+	.atag_offset		= 0x100,
 	.map_io 		= pnx4008_map_io,
 	.init_irq 		= pnx4008_init_irq,
 	.init_machine 		= pnx4008_init,
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 931afeb..469d60d 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x00090000
 		add	\rv, \rp, #0xf4000000	@ virtual
 		add	\rp, \rp, #0x40000000	@ physical
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
deleted file mode 100644
index 1275db6..0000000
--- a/arch/arm/mach-pnx4008/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S
index bf75106..cd97492 100644
--- a/arch/arm/mach-prima2/include/mach/debug-macro.S
+++ b/arch/arm/mach-prima2/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
 #include <mach/hardware.h>
 #include <mach/uart.h>
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =SIRFSOC_UART1_PA_BASE		@ physical
 	ldr	\rv, =SIRFSOC_UART1_VA_BASE		@ virtual
 	.endm
diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h
deleted file mode 100644
index 368cd5a..0000000
--- a/arch/arm/mach-prima2/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/memory.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-/*
- * Restrict DMA-able region to workaround silicon limitation.
- * The limitation restricts buffers available for DMA to SD/MMC
- * hardware to be below 256MB
- */
-#define ARM_DMA_ZONE_SIZE	(SZ_256M)
-
-#endif
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index 9cda205..66c6387e 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -13,7 +13,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <mach/memory.h>
 
 #define L2X0_ADDR_FILTERING_START       0xC00
 #define L2X0_ADDR_FILTERING_END         0xC04
@@ -41,9 +40,9 @@
 		/*
 		 * set the physical memory windows L2 cache will cover
 		 */
-		writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024,
+		writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024,
 			sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
-		writel_relaxed(PLAT_PHYS_OFFSET | 0x1,
+		writel_relaxed(PHYS_OFFSET | 0x1,
 			sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
 
 		writel_relaxed(0,
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index f57124b..ee33c3d 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -31,11 +31,12 @@
 
 MACHINE_START(PRIMA2_EVB, "prima2cb")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_early     = sirfsoc_of_clk_init,
 	.map_io         = sirfsoc_map_lluart,
 	.init_irq	= sirfsoc_of_irq_init,
 	.timer		= &sirfsoc_timer,
+	.dma_zone_size	= SZ_256M,
 	.init_machine	= sirfsoc_mach_init,
 	.dt_compat      = prima2cb_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index d0f1411..fc0b854 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -828,5 +828,5 @@
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 648b0ab..4efc16d 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,7 +148,7 @@
 
 MACHINE_START(CAPC7117,
 	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.boot_params = 0xa0000100,
+	.atag_offset = 0x100,
 	.map_io = pxa3xx_map_io,
 	.init_irq = pxa3xx_init_irq,
 	.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 4f07e16..f2e4190 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -513,7 +513,7 @@
 #endif
 
 MACHINE_START(ARMCORE, "Compulab CM-X2XX")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= cmx2xx_map_io,
 	.nr_irqs	= CMX2XX_NR_IRQS,
 	.init_irq	= cmx2xx_init_irq,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 3814e12..e40dc47 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -850,7 +850,7 @@
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 8709209..7db6646 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -306,7 +306,7 @@
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa270_init,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
@@ -315,7 +315,7 @@
 MACHINE_END
 
 MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa270_income_init,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 60a6781..c825e8b 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -183,7 +183,7 @@
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa300_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d2c6631..692e1ff 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -253,7 +253,7 @@
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa320_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index fe812ea..5e2cf39 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -272,7 +272,7 @@
 }
 
 MACHINE_START(CSB726, "Cogent CSB726")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io         = pxa27x_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 2e37ea5..94acc0b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1299,7 +1299,7 @@
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
@@ -1308,7 +1308,7 @@
 MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index b4599ec..e823c54 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -189,7 +189,7 @@
 
 MACHINE_START(E330, "Toshiba e330")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -239,7 +239,7 @@
 
 MACHINE_START(E350, "Toshiba e350")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -362,7 +362,7 @@
 
 MACHINE_START(E400, "Toshiba e400")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -551,7 +551,7 @@
 
 MACHINE_START(E740, "Toshiba e740")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -743,7 +743,7 @@
 
 MACHINE_START(E750, "Toshiba e750")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -948,7 +948,7 @@
 
 MACHINE_START(E800, "Toshiba e800")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index b73eadb..8308eee 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -797,7 +797,7 @@
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -863,7 +863,7 @@
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -929,7 +929,7 @@
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -1120,7 +1120,7 @@
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -1186,7 +1186,7 @@
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -1226,7 +1226,7 @@
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index deaa111..9c8208c 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -233,7 +233,7 @@
 }
 
 MACHINE_START(GUMSTIX, "Gumstix")
-	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
+	.atag_offset	= 0x100, /* match u-boot bi_boot_params */
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 0a235128..4b5e110 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -203,7 +203,7 @@
 }
 
 MACHINE_START(H5400, "HP iPAQ H5000")
-	.boot_params = 0xa0000100,
+	.atag_offset = 0x100,
 	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
 	.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index a997d0ab..f2c3245 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -158,7 +158,7 @@
 
 
 MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.boot_params = 0xa0000100,
+	.atag_offset = 0x100,
 	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
 	.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index c748a47..6f6368e 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -838,7 +838,7 @@
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
-	.boot_params  = 0xa0000100,
+	.atag_offset  = 0x100,
 	.map_io       = pxa27x_map_io,
 	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d427429..f78d5db 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,7 +191,7 @@
 }
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 7d5c751..70b112e 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x00100000
 		orr	\rv, \rp, #io_p2v(0x40000000)	@ virtual
 		orr	\rp, \rp, #0x40000000		@ physical
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
deleted file mode 100644
index d05a597..0000000
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/memory.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8f97e15..0037e57 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -437,7 +437,7 @@
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 2a76751..1dd5302 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -498,7 +498,7 @@
 
 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 	/* Maintainer: Peter Barada */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= lpd270_map_io,
 	.nr_irqs	= LPD270_NR_IRQS,
 	.init_irq	= lpd270_init_irq,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5fe5bcd..4b796c3 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -753,7 +753,7 @@
 
 
 MACHINE_START(MAGICIAN, "HTC Magician")
-	.boot_params = 0xa0000100,
+	.atag_offset = 0x100,
 	.map_io = pxa27x_map_io,
 	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 6bc784bb..0567d39 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -615,7 +615,7 @@
 
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
-	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
+	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
 	.map_io		= mainstone_map_io,
 	.nr_irqs	= MAINSTONE_NR_IRQS,
 	.init_irq	= mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 64810f9..b938fc2 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -751,7 +751,7 @@
 }
 
 MACHINE_START(MIOA701, "MIO A701")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= &pxa27x_map_io,
 	.init_irq	= &pxa27x_init_irq,
 	.handle_irq	= &pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index fb408861..4af5d51 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,7 +92,7 @@
 
 /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
 MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.boot_params	= 0xa0220100,
+	.atag_offset	= 0x220100,
 	.timer		= &pxa_timer,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 6b77365..3d4a281 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -342,7 +342,7 @@
 }
 
 MACHINE_START(PALMLD, "Palm LifeDrive")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= palmld_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9bd3e47..99d6bcf 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -202,7 +202,7 @@
 }
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ad4a6c..6ec7cae 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -537,7 +537,7 @@
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.boot_params 	= 0xa0000100,
+	.atag_offset 	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 664232f..9376da0 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -356,7 +356,7 @@
 }
 
 MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 30364b0..94e9708 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -445,7 +445,7 @@
 
 #ifdef CONFIG_MACH_TREO680
 MACHINE_START(TREO680, "Palm Treo 680")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
@@ -457,7 +457,7 @@
 
 #ifdef CONFIG_MACH_CENTRO
 MACHINE_START(CENTRO, "Palm Centro 685")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 00c318f..4e3e459 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -364,7 +364,7 @@
 }
 
 MACHINE_START(PALMTX, "Palm T|X")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= palmtx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index e61c1cc..68e18ba 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -399,7 +399,7 @@
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index ffa65df..0b825a3 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -258,7 +258,7 @@
 
 MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
 	/* Maintainer: Pengutronix */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pcm027_map_io,
 	.nr_irqs	= PCM027_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index bbcd905..6810cdd 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1086,7 +1086,7 @@
 
 #ifdef CONFIG_MACH_RAUMFELD_RC
 MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_controller_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
@@ -1097,7 +1097,7 @@
 
 #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
 MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_connector_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
@@ -1108,7 +1108,7 @@
 
 #ifdef CONFIG_MACH_RAUMFELD_SPEAKER
 MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_speaker_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index df4356e..602d70b 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,7 +596,7 @@
 
 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.handle_irq       = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 4668217..3e999e3 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -104,7 +104,7 @@
 }
 
 MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= SAARB_NR_IRQS,
 	.init_irq       = pxa95x_init_irq,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3f8d0af..4c9a48b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1004,7 +1004,7 @@
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= imote2_init,
-	.boot_params	= 0xA0000100,
+	.atag_offset	= 0x100,
 MACHINE_END
 #endif
 
@@ -1016,6 +1016,6 @@
 	.handle_irq = pxa27x_handle_irq,
 	.timer = &pxa_timer,
 	.init_machine = stargate2_init,
-	.boot_params = 0xA0000100,
+	.atag_offset = 0x100,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 32fb58e..ad47bb9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -489,7 +489,7 @@
 
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.handle_irq       = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd5a8ea..fd56916 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -125,7 +125,7 @@
 }
 
 MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= TAVOREVB3_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index c041750..35bbf13 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -554,7 +554,7 @@
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	/* MAINTAINER("Jürgen Schindele") */
-	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
 	.init_irq	= pxa27x_init_irq,
@@ -564,7 +564,7 @@
 
 MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 	/* MAINTAINER("Jürgen Schindele") */
-	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d4a3dc7..242ddae 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,7 +992,7 @@
 
 MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= viper_map_io,
 	.init_irq	= viper_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 5f8490a..a7539a6 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -716,7 +716,7 @@
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index acc600f..54930cc 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -180,7 +180,7 @@
 }
 
 MACHINE_START(XCEP, "Iskratel XCEP")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.init_machine	= xcep_init,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index a82d420..ead32c9 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -719,7 +719,7 @@
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 9188492..498b83b 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -904,7 +904,7 @@
 
 MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= zeus_map_io,
 	.nr_irqs	= ZEUS_NR_IRQS,
 	.init_irq	= zeus_init_irq,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 15ec66b..31d4968 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -422,7 +422,7 @@
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 90b687c..fb4901c 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
 #error "Unknown RealView platform"
 #endif
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #DEBUG_LL_UART_OFFSET
 		orr	\rv, \rp, #0xfb000000	@ virtual base
 		orr	\rp, \rp, #0x10000000	@ physical base
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7a4e3b1..026c66a 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -463,7 +463,7 @@
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_eb_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ad5671a..7263dea 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -358,7 +358,7 @@
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_pb1176_fixup,
 	.map_io		= realview_pb1176_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b43644b..671ad6d 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -360,7 +360,7 @@
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pb11mp_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 763e8f3..cbf22df 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -310,7 +310,7 @@
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pba8_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 363b0ab..8ec7e52 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -393,7 +393,7 @@
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_pbx_fixup,
 	.map_io		= realview_pbx_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 85effff..6d28cc9 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x00010000
 		orr	\rp, \rp, #0x00000fe0
 		orr	\rv, \rp, #0xe0000000	@ virtual
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 580b3c7..a9241eb 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -218,7 +218,7 @@
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
 	/* Maintainer: Russell King */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.reserve_lp0	= 1,
 	.reserve_lp1	= 1,
 	.map_io		= rpc_map_io,
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
deleted file mode 100644
index 3f33670..0000000
--- a/arch/arm/mach-s3c2400/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2400/include/mach/memory.h
- *  from arch/arm/mach-rpc/include/mach/memory.h
- *
- *  Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x0C000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 5882dea..4135de8 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-	.macro addruart, rp, rv
+	.macro addruart, rp, rv, tmp
 		ldr	\rp, = S3C24XX_PA_UART
 		ldr	\rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
deleted file mode 100644
index f92b97b..0000000
--- a/arch/arm/mach-s3c2410/include/mach/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/memory.h
- *  from arch/arm/mach-rpc/include/mach/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x30000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index dabc141..7983894 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -236,7 +236,7 @@
 }
 
 MACHINE_START(AML_M5900, "AML_M5900")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= amlm5900_init,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e2d536..a20ae1a 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -657,7 +657,7 @@
 
 MACHINE_START(BAST, "Simtec-BAST")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= bast_init,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2a2fa06..556c535 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -744,7 +744,7 @@
 
 MACHINE_START(H1940, "IPAQ-H1940")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= h1940_map_io,
 	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 079dcaa..1dc3e32 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -586,7 +586,7 @@
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
 				Ben Dooks <ben-linux@fluff.org>
 	*/
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
@@ -596,7 +596,7 @@
 MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 0aa16cd..f03f3fd 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,7 +116,7 @@
 
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index f44f775..367d376 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -344,7 +344,7 @@
 }
 
 MACHINE_START(QT2410, "QT2410")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= qt2410_machine_init,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index e17f033..99c9dfd 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,7 +111,7 @@
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
 				    * to SMDK2410 */
 	/* Maintainer: Jonas Dietsche */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= smdk2410_init,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 43c2b83..e0d0b6f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -146,7 +146,7 @@
 }
 
 MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= tct_hammer_init,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 6ccce5a..df47e8e 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,7 +400,7 @@
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 5eeb475..286ef17 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -655,7 +655,7 @@
 
 MACHINE_START(JIVE, "JIVE")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= jive_map_io,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 834cfb6..d6325ede 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -128,7 +128,7 @@
 
 MACHINE_START(S3C2413, "S3C2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c24xx_init_irq,
@@ -139,7 +139,7 @@
 
 MACHINE_START(SMDK2412, "SMDK2412")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c24xx_init_irq,
@@ -150,7 +150,7 @@
 
 MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 83544eb..5955c15 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -156,7 +156,7 @@
 }
 
 MACHINE_START(VSTMS, "VSTMS")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.fixup		= vstms_fixup,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index ac27ebb..a9eee53 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -245,7 +245,7 @@
 
 MACHINE_START(SMDK2416, "SMDK2416")
 	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2416_map_io,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d708678..74f92fc 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,7 +498,7 @@
 
 MACHINE_START(ANUBIS, "Simtec-Anubis")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 6c98b78..38887ee 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -233,7 +233,7 @@
 
 
 MACHINE_START(AT2440EVB, "AT2440EVB")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index c10ddf4..de1e0ff 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -595,7 +595,7 @@
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index fc2dc0b..91fe0b4 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -676,7 +676,7 @@
 
 MACHINE_START(MINI2440, "MINI2440")
 	/* Maintainer: Michel Pollet <buserror@gmail.com> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 37dd306..61c0bf1 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,7 +151,7 @@
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index d885363..dc142eb 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -447,7 +447,7 @@
 
 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 27ea950..684dbb3 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -825,7 +825,7 @@
 
 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
-	.boot_params = S3C2410_SDRAM_PA + 0x100,
+	.atag_offset = 0x100,
 	.map_io = rx1950_map_io,
 	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1472b1a..e19499c 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -218,7 +218,7 @@
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= rx3715_map_io,
 	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index eedfe0f..36eeb41 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,7 +175,7 @@
 
 MACHINE_START(S3C2440, "SMDK2440")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2440_map_io,
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 514275e..bec107e 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -139,7 +139,7 @@
 
 MACHINE_START(SMDK2443, "SMDK2443")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2443_map_io,
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 374e45e..8dc0576 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -20,6 +20,7 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/hardware.h>
 #include <mach/map.h>
@@ -145,6 +146,7 @@
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 	iotable_init(mach_desc, size);
+	init_consistent_dma_size(SZ_8M);
 
 	idcode = __raw_readl(S3C_VA_SYS + 0x118);
 	if (!idcode) {
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index a29e705..c0c076a 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rp, rv
+	.macro addruart, rp, rv, tmp
 		ldr	\rp, = S3C_PA_UART
 		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
deleted file mode 100644
index 4760cda..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/memory.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET     UL(0x50000000)
-
-#define CONSISTENT_DMA_SIZE	SZ_8M
-
-#endif
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index cb88643..d164a28 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,7 +233,7 @@
 
 MACHINE_START(ANW6410, "A&W6410")
 	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= anw6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe..4c76e084 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -766,7 +766,7 @@
 
 MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
 	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= crag6410_map_io,
 	.init_machine	= crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index b3d93cc..19a0887 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -265,7 +265,7 @@
 
 MACHINE_START(HMT, "Airgoo-HMT")
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 527f49b..e91f63f 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -349,7 +349,7 @@
 
 MACHINE_START(MINI6410, "MINI6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 01c6857..c30f2e5 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,7 +97,7 @@
 
 MACHINE_START(NCP, "NCP")
 	/* Maintainer: Samsung Electronics */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 95b04b1..10870cb 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -329,7 +329,7 @@
 
 MACHINE_START(REAL6410, "REAL6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= real6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 342e8df..cbb57de 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -146,7 +146,7 @@
 
 MACHINE_START(SMARTQ5, "SmartQ 5")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 5796397..04f914b 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -162,7 +162,7 @@
 
 MACHINE_START(SMARTQ7, "SmartQ 7")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 3cca642..6fd5e95 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,7 +85,7 @@
 
 MACHINE_START(SMDK6400, "SMDK6400")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6400_init_irq,
 	.map_io		= smdk6400_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index a9f3183..7b66ede 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -703,7 +703,7 @@
 
 MACHINE_START(SMDK6410, "SMDK6410")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smdk6410_map_io,
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c0095..8a93854 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -20,6 +20,7 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -111,6 +112,7 @@
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+	init_consistent_dma_size(SZ_8M);
 }
 
 void __init s5p6450_map_io(void)
@@ -120,6 +122,7 @@
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+	init_consistent_dma_size(SZ_8M);
 }
 
 /*
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index 79b04e6..e80ba3c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #include <plat/regs-serial.h>
 
-	.macro addruart, rp, rv
+	.macro addruart, rp, rv, tmp
 		mov	\rp, #0xE0000000
 		orr	\rp, \rp, #0x00100000
 		ldr	\rp, [\rp, #0x118 ]
diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
deleted file mode 100644
index 365a6eb..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET		UL(0x20000000)
-#define CONSISTENT_DMA_SIZE	SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 346f8df..3b84e9b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -171,7 +171,7 @@
 
 MACHINE_START(SMDK6440, "SMDK6440")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6440_init_irq,
 	.map_io		= smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 33f2adf..d99d29b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -190,7 +190,7 @@
 
 MACHINE_START(SMDK6450, "SMDK6450")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6450_init_irq,
 	.map_io		= smdk6450_map_io,
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index b2ba95d..694f759 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rp, rv
+	.macro addruart, rp, rv, tmp
 		ldr	\rp, = S3C_PA_UART
 		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
deleted file mode 100644
index bda4e79..0000000
--- a/arch/arm/mach-s5pc100/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/memory.h
- *
- * Copyright 2008 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET     	UL(0x20000000)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 227d890..688f45b 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -254,7 +254,7 @@
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pc100_init_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec..9114572 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -20,6 +20,7 @@
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -119,6 +120,7 @@
 void __init s5pv210_map_io(void)
 {
 	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+	init_consistent_dma_size(14 << 20);
 
 	/* initialise device information early */
 	s5pv210_default_sdhci0();
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 169fe65..79e5559 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rp, rv
+	.macro addruart, rp, rv, tmp
 		ldr	\rp, = S3C_PA_UART
 		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 7b5fcf0..2d3cfa2 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -14,7 +14,6 @@
 #define __ASM_ARCH_MEMORY_H
 
 #define PLAT_PHYS_OFFSET		UL(0x20000000)
-#define CONSISTENT_DMA_SIZE	(SZ_8M + SZ_4M + SZ_2M)
 
 /*
  * Sparsemem support
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 509627f..5811a96 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -678,7 +678,7 @@
 	/* Maintainers:
 	   Marek Szyprowski <m.szyprowski@samsung.com>
 	   Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= aquila_map_io,
 	.init_machine	= aquila_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51..061cc7e 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -897,7 +897,7 @@
 
 MACHINE_START(GONI, "GONI")
 	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= goni_map_io,
 	.init_machine	= goni_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 6c412c8..f7266bb 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -136,7 +136,7 @@
 
 MACHINE_START(SMDKC110, "SMDKC110")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkc110_map_io,
 	.init_machine	= smdkc110_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 5e011fc..e73e3b6d 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -319,7 +319,7 @@
 
 MACHINE_START(SMDKV210, "SMDKV210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkv210_map_io,
 	.init_machine	= smdkv210_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 925fc0d..97cc066 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -125,7 +125,7 @@
 
 MACHINE_START(TORBRECK, "TORBRECK")
 	/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= torbreck_map_io,
 	.init_machine	= torbreck_machine_init,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 26257df..d40da5f 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -447,7 +447,7 @@
 
 
 MACHINE_START(ASSABET, "Intel-Assabet")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.fixup		= fixup_assabet,
 	.map_io		= assabet_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0..bda83e1 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,7 +302,7 @@
 }
 
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= badge4_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 03d7376..b30733a 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,7 +84,7 @@
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= h3100_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 965f64a..6fd324d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,7 +125,7 @@
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= h3600_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434..30f4a55 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,7 +195,7 @@
  */
 
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= hackkit_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 0cd0fc9..530772d 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 */
 #include <mach/hardware.h>
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mrc	p15, 0, \rp, c1, c0
 		tst	\rp, #1			@ MMU enabled?
 		moveq	\rp, #0x80000000	@ physical base address
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 176c066..0bb520d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,7 +364,7 @@
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= jornada720_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b..5bc59d0 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,7 +61,7 @@
 }
 
 MACHINE_START(LART, "LART")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= lart_map_io,
 	.init_irq	= sa1100_init_irq,
 	.init_machine	= lart_init,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 72087f0..032f388 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -111,7 +111,7 @@
 }
 
 MACHINE_START(NANOENGINE, "BSE nanoEngine")
-	.boot_params	= 0xc0000000,
+	.atag_offset	= 0x100,
 	.map_io		= nanoengine_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 7917b24..1cccbf5 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,7 +82,7 @@
 }
 
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= shannon_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cfb7607..a1c2427 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -229,7 +229,7 @@
 
 MACHINE_START(SIMPAD, "Simpad")
 	/* Maintainer: Holger Freyther */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= simpad_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index ac2873c..feda3ca 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -152,7 +152,7 @@
 
 MACHINE_START(SHARK, "Shark")
 	/* Maintainer: Alexander Schulz */
-	.boot_params	= 0x08003000,
+	.atag_offset	= 0x3000,
 	.map_io		= shark_map_io,
 	.init_irq	= shark_init_irq,
 	.timer		= &shark_timer,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index a473f55..20eb2bf 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0xe0000000
 		orr	\rp, \rp, #0x000003f8
 		mov	\rv, \rp
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cdfdd62..5fde49d 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -37,6 +37,7 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
+#include <linux/dma-mapping.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -447,6 +448,8 @@
 static void __init ag5evm_map_io(void)
 {
 	iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+	/* DMA memory at 0xf6000000 - 0xffdfffff */
+	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh73a0_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 523f608..b622d8d 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -42,6 +42,7 @@
 #include <linux/leds.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/dma-mapping.h>
 
 #include <media/sh_mobile_ceu.h>
 #include <media/sh_mobile_csi2.h>
@@ -1170,6 +1171,8 @@
 static void __init ap4evb_map_io(void)
 {
 	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+	/* DMA memory at 0xf6000000 - 0xffdfffff */
+	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index ef4613b..8b620bf 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -32,6 +32,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/dma-mapping.h>
 #include <mach/sh7367.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
@@ -260,6 +261,8 @@
 static void __init g3evm_map_io(void)
 {
 	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+	/* DMA memory at 0xf6000000 - 0xffdfffff */
+	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 8e3c555..7719ddc 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -33,6 +33,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/gpio.h>
+#include <linux/dma-mapping.h>
 #include <mach/sh7377.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
@@ -274,6 +275,8 @@
 static void __init g4evm_map_io(void)
 {
 	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+	/* DMA memory at 0xf6000000 - 0xffdfffff */
+	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 17c19dc..de2253d 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -45,6 +45,7 @@
 #include <linux/tca6416_keypad.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
+#include <linux/dma-mapping.h>
 
 #include <video/sh_mobile_hdmi.h>
 #include <video/sh_mobile_lcdc.h>
@@ -1381,6 +1382,8 @@
 static void __init mackerel_map_io(void)
 {
 	iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
+	/* DMA memory at 0xf6000000 - 0xffdfffff */
+	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
index ad00c3c..0ffbe81 100644
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -4,7 +4,4 @@
 #define PLAT_PHYS_OFFSET	UL(CONFIG_MEMORY_START)
 #define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
 
-/* DMA memory at 0xf6000000 - 0xffdfffff */
-#define CONSISTENT_DMA_SIZE (158 << 20)
-
 #endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h
deleted file mode 100644
index 5173522..0000000
--- a/arch/arm/mach-spear3xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/memory.h
- *
- * Memory map for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 69006f6..a5ff98e 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -64,7 +64,7 @@
 }
 
 MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
-	.boot_params	=	0x00000100,
+	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
 	.timer		=	&spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index c8684ce..45d180d 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -70,7 +70,7 @@
 }
 
 MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
-	.boot_params	=	0x00000100,
+	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
 	.timer		=	&spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index a12b353..2287984 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -68,7 +68,7 @@
 }
 
 MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
-	.boot_params	=	0x00000100,
+	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
 	.timer		=	&spear3xx_timer,
diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h
deleted file mode 100644
index 781f088..0000000
--- a/arch/arm/mach-spear6xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/memory.h
- *
- * Memory map for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif	/* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index f19cefe..8238fe3 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -43,7 +43,7 @@
 }
 
 MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
-	.boot_params	=	0x00000100,
+	.atag_offset	=	0x100,
 	.map_io		=	spear6xx_map_io,
 	.init_irq	=	spear6xx_init_irq,
 	.timer		=	&spear6xx_timer,
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
index 4cb3c2d..777a5bb 100644
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -73,7 +73,7 @@
 }
 
 MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= tcc8k_map_io,
 	.init_irq	= tcc8k_init_irq,
 	.init_machine	= tcc8k_init,
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 846cd7d..a4d1980 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -179,7 +179,7 @@
 }
 
 MACHINE_START(HARMONY, "harmony")
-	.boot_params  = 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= tegra_harmony_fixup,
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index ea2f79c..3197c4c 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -127,7 +127,7 @@
 }
 
 MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= tegra_paz00_fixup,
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 56cbabf..9e98ac7 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -201,7 +201,7 @@
 
 
 MACHINE_START(SEABOARD, "seaboard")
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
@@ -210,7 +210,7 @@
 MACHINE_END
 
 MACHINE_START(KAEN, "kaen")
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
@@ -219,7 +219,7 @@
 MACHINE_END
 
 MACHINE_START(WARIO, "wario")
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 89a6d2a..8489aa8 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -171,7 +171,7 @@
 }
 
 MACHINE_START(TRIMSLICE, "trimslice")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= tegra_trimslice_fixup,
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index e0ebe65..619abc6 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
 #include <mach/io.h>
 #include <mach/iomap.h>
 
-	.macro  addruart, rp, rv
+	.macro  addruart, rp, rv, tmp
         ldr     \rp, =IO_APB_PHYS       @ physical
         ldr     \rv, =IO_APB_VIRT        @ virtual
 	orr	\rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h
deleted file mode 100644
index 537db3aa..0000000
--- a/arch/arm/mach-tegra/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/memory.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_MEMORY_H
-#define __MACH_TEGRA_MEMORY_H
-
-/* physical offset of RAM */
-#define PLAT_PHYS_OFFSET		UL(0)
-
-#endif
-
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index fd435f4..22c5ab7 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/fsmc.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -93,6 +94,8 @@
 void __init u300_map_io(void)
 {
 	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+	/* We enable a real big DMA buffer if need be. */
+	init_consistent_dma_size(SZ_4M);
 }
 
 /*
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index df71570..8ae8e4a 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	/* If we move the address using MMU, use this. */
 	ldr	\rp,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
 	ldr	\rv,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 888e2e3..7034bae 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -16,7 +16,7 @@
 #ifdef CONFIG_MACH_U300_DUAL_RAM
 
 #define PLAT_PHYS_OFFSET		UL(0x48000000)
-#define BOOT_PARAMS_OFFSET	(PHYS_OFFSET + 0x100)
+#define BOOT_PARAMS_OFFSET		0x100
 
 #else
 
@@ -24,19 +24,14 @@
 #define PLAT_PHYS_OFFSET (0x28000000 + \
 	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
 	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET (0x100 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2)
 #else
 #define PLAT_PHYS_OFFSET (0x28000000 + \
 	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE +	\
 	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET 0x100
 #endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
-	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE +		\
-	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
 #endif
 
-/*
- * We enable a real big DMA buffer if need be.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
 #endif
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 48b3b7f..80e7305 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -61,7 +61,7 @@
 
 MACHINE_START(U300, MACH_U300_STRING)
 	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
-	.boot_params	= BOOT_PARAMS_OFFSET,
+	.atag_offset	= BOOT_PARAMS_OFFSET,
 	.map_io		= u300_map_io,
 	.reserve	= u300_reserve,
 	.init_irq	= u300_init_irq,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 537ab63..f67b83d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -646,7 +646,7 @@
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
@@ -655,7 +655,7 @@
 MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
@@ -663,7 +663,7 @@
 MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 2d9e191..e014aa7 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -118,7 +118,7 @@
 }
 
 MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 700fb05..8d74d92 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -35,7 +35,7 @@
 #define UX500_UART(n)	__UX500_UART(n)
 #define UART_BASE	UX500_UART(CONFIG_UX500_DEBUG_UART)
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =UART_BASE				@ no, physical address
 	ldr	\rv, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
 	.endm
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
deleted file mode 100644
index 2ef697a..0000000
--- a/arch/arm/mach-ux500/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-#define BUS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index eb2cf7d..d0fbd7f 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp,      #0x001F0000
 		orr	\rp, \rp, #0x00001000
 		orr	\rv, \rp, #0xf1000000	@ virtual base
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
deleted file mode 100644
index dacc9d8..0000000
--- a/arch/arm/mach-versatile/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index f8ae64b..fda4866 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,7 +35,7 @@
 
 MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 37c23df..feaf9cb 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -103,7 +103,7 @@
 
 MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 050d65e..fd9e6c7 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 
 #define DEBUG_LL_UART_OFFSET	0x00009000
 
-		.macro	addruart,rp,rv
+		.macro	addruart,rp,rv,tmp
 		mov	\rp, #DEBUG_LL_UART_OFFSET
 		orr	\rv, \rp, #0xf8000000	@ virtual base
 		orr	\rp, \rp, #0x10000000	@ physical base
diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h
deleted file mode 100644
index 5b7fcd4..0000000
--- a/arch/arm/mach-vexpress/include/mach/memory.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x60000000)
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d0d267a..1fafc324 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -443,7 +443,7 @@
 }
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= v2m_map_io,
 	.init_early	= v2m_init_early,
 	.init_irq	= v2m_init_irq,
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index 94a261d..a464c75 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -68,7 +68,7 @@
 }
 
 MACHINE_START(BV07, "Benign BV07 Mini Netbook")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.reserve	= vt8500_reserve_mem,
 	.map_io		= vt8500_map_io,
 	.init_irq	= vt8500_init_irq,
diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
index f119162..ca292f2 100644
--- a/arch/arm/mach-vt8500/include/mach/debug-macro.S
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-	.macro	addruart, rp, rv
+	.macro	addruart, rp, rv, tmp
 	mov	\rp,      #0x00200000
 	orr	\rv, \rp, #0xf8000000
 	orr	\rp, \rp, #0xd8000000
diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h
deleted file mode 100644
index 175f914..0000000
--- a/arch/arm/mach-vt8500/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
index e73aadb..cf910a9 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -68,7 +68,7 @@
 }
 
 MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.reserve	= wm8505_reserve_mem,
 	.map_io		= wm8505_map_io,
 	.init_irq	= wm8505_init_irq,
diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h
deleted file mode 100644
index f02905b..0000000
--- a/arch/arm/mach-w90x900/include/mach/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 30fccde..31c1090 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,7 +34,6 @@
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
 	/* Maintainer: Wan ZongShun */
-	.boot_params	= 0,
 	.map_io		= nuc910evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc910evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 590c99b..4062e55 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -37,7 +37,6 @@
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
 	/* Maintainer: Wan ZongShun */
-	.boot_params	= 0,
 	.map_io		= nuc950evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc950evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e09c645..0ab9995 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,7 +34,6 @@
 
 MACHINE_START(W90N960EVB, "W90N960EVB")
 	/* Maintainer: Wan ZongShun */
-	.boot_params	= 0,
 	.map_io		= nuc960evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc960evb_init,
diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S
index 9f664d5..3ab0be1 100644
--- a/arch/arm/mach-zynq/include/mach/debug-macro.S
+++ b/arch/arm/mach-zynq/include/mach/debug-macro.S
@@ -17,7 +17,7 @@
 #include <mach/zynq_soc.h>
 #include <mach/uart.h>
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =LL_UART_PADDR	@ physical
 		ldr	\rv, =LL_UART_VADDR	@ virtual
 		.endm
diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h
deleted file mode 100644
index 35a9263..0000000
--- a/arch/arm/mach-zynq/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/memory.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MEMORY_H__
-#define __MACH_MEMORY_H__
-
-#include <asm/sizes.h>
-
-#define PLAT_PHYS_OFFSET	UL(0x0)
-
-#endif
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c3ff82f..01f5987 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -18,12 +18,14 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/highmem.h>
+#include <linux/slab.h>
 
 #include <asm/memory.h>
 #include <asm/highmem.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
+#include <asm/mach/arch.h>
 
 #include "mm.h"
 
@@ -117,26 +119,37 @@
 }
 
 #ifdef CONFIG_MMU
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
 
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PGDIR_SHIFT)
 
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static pte_t **consistent_pte;
+
+#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
+
+unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+
+void __init init_consistent_dma_size(unsigned long size)
+{
+	unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
+
+	BUG_ON(consistent_pte); /* Check we're called before DMA region init */
+	BUG_ON(base < VMALLOC_END);
+
+	/* Grow region to accommodate specified size  */
+	if (base < consistent_base)
+		consistent_base = base;
+}
 
 #include "vmregion.h"
 
 static struct arm_vmregion_head consistent_head = {
 	.vm_lock	= __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
 	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
-	.vm_start	= CONSISTENT_BASE,
 	.vm_end		= CONSISTENT_END,
 };
 
@@ -155,7 +168,17 @@
 	pmd_t *pmd;
 	pte_t *pte;
 	int i = 0;
-	u32 base = CONSISTENT_BASE;
+	unsigned long base = consistent_base;
+	unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+
+	consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
+	if (!consistent_pte) {
+		pr_err("%s: no memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
+	consistent_head.vm_start = base;
 
 	do {
 		pgd = pgd_offset(&init_mm, base);
@@ -198,7 +221,7 @@
 	size_t align;
 	int bit;
 
-	if (!consistent_pte[0]) {
+	if (!consistent_pte) {
 		printk(KERN_ERR "%s: not initialised\n", __func__);
 		dump_stack();
 		return NULL;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index cc7e2d8..34409a0 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -653,9 +653,6 @@
 			"    ITCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
 #endif
 			"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-#ifdef CONFIG_MMU
-			"    DMA     : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-#endif
 			"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MB)\n"
 			"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MB)\n"
 #ifdef CONFIG_HIGHMEM
@@ -674,9 +671,6 @@
 			MLK(ITCM_OFFSET, (unsigned long) itcm_end),
 #endif
 			MLK(FIXADDR_START, FIXADDR_TOP),
-#ifdef CONFIG_MMU
-			MLM(CONSISTENT_BASE, CONSISTENT_END),
-#endif
 			MLM(VMALLOC_START, VMALLOC_END),
 			MLM(PAGE_OFFSET, (unsigned long)high_memory),
 #ifdef CONFIG_HIGHMEM
@@ -699,9 +693,6 @@
 	 * be detected at build time already.
 	 */
 #ifdef CONFIG_MMU
-	BUILD_BUG_ON(VMALLOC_END			> CONSISTENT_BASE);
-	BUG_ON(VMALLOC_END				> CONSISTENT_BASE);
-
 	BUILD_BUG_ON(TASK_SIZE				> MODULES_VADDR);
 	BUG_ON(TASK_SIZE 				> MODULES_VADDR);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index e4dde91..a304593 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -54,7 +54,7 @@
 
 #define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =UART_PADDR	@ physical
 		ldr	\rv, =UART_VADDR	@ virtual
 		.endm
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
deleted file mode 100644
index 11be5cd..0000000
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#define MX1_PHYS_OFFSET		UL(0x08000000)
-#define MX21_PHYS_OFFSET	UL(0xc0000000)
-#define MX25_PHYS_OFFSET	UL(0x80000000)
-#define MX27_PHYS_OFFSET	UL(0xa0000000)
-#define MX3x_PHYS_OFFSET	UL(0x80000000)
-#define MX50_PHYS_OFFSET	UL(0x70000000)
-#define MX51_PHYS_OFFSET	UL(0x90000000)
-#define MX53_PHYS_OFFSET	UL(0x70000000)
-
-#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
-# if defined CONFIG_ARCH_MX1
-#  define PLAT_PHYS_OFFSET		MX1_PHYS_OFFSET
-# elif defined CONFIG_MACH_MX21
-#  define PLAT_PHYS_OFFSET		MX21_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX25
-#  define PLAT_PHYS_OFFSET		MX25_PHYS_OFFSET
-# elif defined CONFIG_MACH_MX27
-#  define PLAT_PHYS_OFFSET		MX27_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX3
-#  define PLAT_PHYS_OFFSET		MX3x_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX50
-#  define PLAT_PHYS_OFFSET		MX50_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX51
-#  define PLAT_PHYS_OFFSET		MX51_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX53
-#  define PLAT_PHYS_OFFSET		MX53_PHYS_OFFSET
-# endif
-#endif
-
-#if defined(CONFIG_MX3_VIDEO)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index bb8f4a6..95732af 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,6 +14,7 @@
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select NEED_MACH_MEMORY_H
 	help
 	  "Systems based on omap7xx, omap15xx or omap16xx"
 
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index d72ec85..ebe67ea 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -309,6 +309,8 @@
 void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
 void omap_iounmap(volatile void __iomem *addr);
 
+extern void __init omap_init_consistent_dma_size(void);
+
 #endif
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
deleted file mode 100644
index e6720aa..0000000
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PLAT_PHYS_OFFSET		UL(0x10000000)
-#else
-#define PLAT_PHYS_OFFSET		UL(0x80000000)
-#endif
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn)	\
-	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
-	   if (is_lbus_device(dev)) \
-		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
-	   __dma; })
-
-#define __arch_dma_to_pfn(dev, addr)	\
-	({ dma_addr_t __dma = addr;				\
-	   if (is_lbus_device(dev))				\
-		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
-	   __phys_to_pfn(__dma);				\
-	})
-
-#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
-						lbus_to_virt(addr) : \
-						__phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
-					   (dma_addr_t) (is_lbus_device(dev) ? \
-						virt_to_lbus(__addr) : \
-						__virt_to_phys(__addr)); })
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
-	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index de3b10c..1ab9fd6 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -16,8 +16,8 @@
 #include <linux/init.h>
 
 /*
- * Memory entry used for the DEBUG_LL UART configuration. See also
- * uncompress.h and debug-macro.S.
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
  *
  * Note that using a memory location for storing the UART configuration
  * has at least two limitations:
@@ -27,7 +27,7 @@
  * 2. We assume printascii is called at least once before paging_init,
  *    and addruart has a chance to read OMAP_UART_INFO
  */
-#define OMAP_UART_INFO		(PLAT_PHYS_OFFSET + 0x3ffc)
+#define OMAP_UART_INFO_OFS	0x3ffc
 
 /* OMAP1 serial ports */
 #define OMAP1_UART1_BASE	0xfffb0000
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index a067484..2f472e9 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -36,7 +36,13 @@
  */
 static void set_omap_uart_info(unsigned char port)
 {
-	*(volatile u32 *)OMAP_UART_INFO = port;
+	/*
+	 * Get address of some.bss variable and round it down
+	 * a la CONFIG_AUTO_ZRELADDR.
+	 */
+	u32 ram_start = (u32)&uart_shift & 0xf8000000;
+	u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+	*uart_info = port;
 }
 
 static void putc(int c)
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index f1ecfa9..e9b0e23 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/dma-mapping.h>
 
 #include <plat/omap7xx.h>
 #include <plat/omap1510.h>
@@ -139,3 +140,10 @@
 		__iounmap(addr);
 }
 EXPORT_SYMBOL(omap_iounmap);
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+	init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 8501bbf..02b160a 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,7 +14,7 @@
 #include <linux/amba/serial.h>
 #include <mach/hardware.h>
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
 		mov	\rv, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h
deleted file mode 100644
index 7e3599e..0000000
--- a/arch/arm/plat-spear/include/plat/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/memory.h
- *
- * Memory map for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_MEMORY_H
-#define __PLAT_MEMORY_H
-
-/* Physical DRAM offset */
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-
-#endif /* __PLAT_MEMORY_H */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
index 7662f73..cf17d04 100644
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
  *
  */
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		moveq	\rp, #0x90000000	@ physical base address
 		movne	\rv, #0xF1000000	@ virtual base
 		orr	\rp, \rp, #0x00007000	@ UART0
diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h
deleted file mode 100644
index 28a6e0c..0000000
--- a/arch/arm/plat-tcc/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET		UL(0x20000000)
-
-#endif
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index b0176e4..61f4ee4 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -41,12 +41,6 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-#ifdef	CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
 #include <asm/uaccess.h>
 
 #include "musb_core.h"