| /* |
| * BCM2835 SDHCI |
| * Copyright (C) 2012 Stephen Warren |
| * Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me |
| * Portions of the code there were obviously based on the Linux kernel at: |
| * git://github.com/raspberrypi/linux.git rpi-3.6.y |
| * commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/mmc/host.h> |
| #include "sdhci-pltfm.h" |
| |
| /* |
| * 400KHz is max freq for card ID etc. Use that as min card clock. We need to |
| * know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY. |
| */ |
| #define MIN_FREQ 400000 |
| |
| /* |
| * The Arasan has a bugette whereby it may lose the content of successive |
| * writes to registers that are within two SD-card clock cycles of each other |
| * (a clock domain crossing problem). It seems, however, that the data |
| * register does not have this problem, which is just as well - otherwise we'd |
| * have to nobble the DMA engine too. |
| * |
| * This should probably be dynamically calculated based on the actual card |
| * frequency. However, this is the longest we'll have to wait, and doesn't |
| * seem to slow access down too much, so the added complexity doesn't seem |
| * worth it for now. |
| * |
| * 1/MIN_FREQ is (max) time per tick of eMMC clock. |
| * 2/MIN_FREQ is time for two ticks. |
| * Multiply by 1000000 to get uS per two ticks. |
| * *1000000 for uSecs. |
| * +1 for hack rounding. |
| */ |
| #define BCM2835_SDHCI_WRITE_DELAY (((2 * 1000000) / MIN_FREQ) + 1) |
| |
| struct bcm2835_sdhci { |
| u32 shadow; |
| }; |
| |
| static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg) |
| { |
| writel(val, host->ioaddr + reg); |
| |
| udelay(BCM2835_SDHCI_WRITE_DELAY); |
| } |
| |
| static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg) |
| { |
| u32 val = readl(host->ioaddr + reg); |
| |
| if (reg == SDHCI_CAPABILITIES) |
| val |= SDHCI_CAN_VDD_330; |
| |
| return val; |
| } |
| |
| static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv; |
| u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow : |
| bcm2835_sdhci_readl(host, reg & ~3); |
| u32 word_num = (reg >> 1) & 1; |
| u32 word_shift = word_num * 16; |
| u32 mask = 0xffff << word_shift; |
| u32 newval = (oldval & ~mask) | (val << word_shift); |
| |
| if (reg == SDHCI_TRANSFER_MODE) |
| bcm2835_host->shadow = newval; |
| else |
| bcm2835_sdhci_writel(host, newval, reg & ~3); |
| } |
| |
| static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg) |
| { |
| u32 val = bcm2835_sdhci_readl(host, (reg & ~3)); |
| u32 word_num = (reg >> 1) & 1; |
| u32 word_shift = word_num * 16; |
| u32 word = (val >> word_shift) & 0xffff; |
| |
| return word; |
| } |
| |
| static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg) |
| { |
| u32 oldval = bcm2835_sdhci_readl(host, reg & ~3); |
| u32 byte_num = reg & 3; |
| u32 byte_shift = byte_num * 8; |
| u32 mask = 0xff << byte_shift; |
| u32 newval = (oldval & ~mask) | (val << byte_shift); |
| |
| bcm2835_sdhci_writel(host, newval, reg & ~3); |
| } |
| |
| static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg) |
| { |
| u32 val = bcm2835_sdhci_readl(host, (reg & ~3)); |
| u32 byte_num = reg & 3; |
| u32 byte_shift = byte_num * 8; |
| u32 byte = (val >> byte_shift) & 0xff; |
| |
| return byte; |
| } |
| |
| static unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host) |
| { |
| return MIN_FREQ; |
| } |
| |
| static const struct sdhci_ops bcm2835_sdhci_ops = { |
| .write_l = bcm2835_sdhci_writel, |
| .write_w = bcm2835_sdhci_writew, |
| .write_b = bcm2835_sdhci_writeb, |
| .read_l = bcm2835_sdhci_readl, |
| .read_w = bcm2835_sdhci_readw, |
| .read_b = bcm2835_sdhci_readb, |
| .get_max_clock = sdhci_pltfm_clk_get_max_clock, |
| .get_min_clock = bcm2835_sdhci_get_min_clock, |
| }; |
| |
| static const struct sdhci_pltfm_data bcm2835_sdhci_pdata = { |
| .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | |
| SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, |
| .ops = &bcm2835_sdhci_ops, |
| }; |
| |
| static int bcm2835_sdhci_probe(struct platform_device *pdev) |
| { |
| struct sdhci_host *host; |
| struct bcm2835_sdhci *bcm2835_host; |
| struct sdhci_pltfm_host *pltfm_host; |
| int ret; |
| |
| host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata, 0); |
| if (IS_ERR(host)) |
| return PTR_ERR(host); |
| |
| bcm2835_host = devm_kzalloc(&pdev->dev, sizeof(*bcm2835_host), |
| GFP_KERNEL); |
| if (!bcm2835_host) { |
| dev_err(mmc_dev(host->mmc), |
| "failed to allocate bcm2835_sdhci\n"); |
| return -ENOMEM; |
| } |
| |
| pltfm_host = sdhci_priv(host); |
| pltfm_host->priv = bcm2835_host; |
| |
| pltfm_host->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(pltfm_host->clk)) { |
| ret = PTR_ERR(pltfm_host->clk); |
| goto err; |
| } |
| |
| return sdhci_add_host(host); |
| |
| err: |
| sdhci_pltfm_free(pdev); |
| return ret; |
| } |
| |
| static int bcm2835_sdhci_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); |
| |
| sdhci_remove_host(host, dead); |
| sdhci_pltfm_free(pdev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id bcm2835_sdhci_of_match[] = { |
| { .compatible = "brcm,bcm2835-sdhci" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match); |
| |
| static struct platform_driver bcm2835_sdhci_driver = { |
| .driver = { |
| .name = "sdhci-bcm2835", |
| .owner = THIS_MODULE, |
| .of_match_table = bcm2835_sdhci_of_match, |
| .pm = SDHCI_PLTFM_PMOPS, |
| }, |
| .probe = bcm2835_sdhci_probe, |
| .remove = bcm2835_sdhci_remove, |
| }; |
| module_platform_driver(bcm2835_sdhci_driver); |
| |
| MODULE_DESCRIPTION("BCM2835 SDHCI driver"); |
| MODULE_AUTHOR("Stephen Warren"); |
| MODULE_LICENSE("GPL v2"); |