staging: comedi: ni_daq_dio24: convert to auto attach
Convert this pcmcia driver to the comedi auto attach mechanism.
This allows getting rid of the "hack" needed to pass the pcmcia_device
pointer from the pcmcia_driver to the comedi_driver as well as the
now unnecessary boardinfo.
Check the call to subdev_8255_init() for success. That function does
a kzalloc and could return -ENOMEM.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 47268dd..e491375 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -49,97 +49,6 @@
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
-static struct pcmcia_device *pcmcia_cur_dev;
-
-#define DIO24_SIZE 4 /* size of io region used by board */
-
-enum dio24_bustype { pcmcia_bustype };
-
-struct dio24_board_struct {
- const char *name;
- int device_id; /* device id for pcmcia board */
- enum dio24_bustype bustype; /* PCMCIA */
- int have_dio; /* have 8255 chip */
- /* function pointers so we can use inb/outb or readb/writeb as appropriate */
- unsigned int (*read_byte) (unsigned int address);
- void (*write_byte) (unsigned int byte, unsigned int address);
-};
-
-static const struct dio24_board_struct dio24_boards[] = {
- {
- .name = "daqcard-dio24",
- .device_id = 0x475c, /* 0x10b is manufacturer id, 0x475c is device id */
- .bustype = pcmcia_bustype,
- .have_dio = 1,
- },
- {
- .name = "ni_daq_dio24",
- .device_id = 0x475c, /* 0x10b is manufacturer id, 0x475c is device id */
- .bustype = pcmcia_bustype,
- .have_dio = 1,
- },
-};
-
-static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
- const struct dio24_board_struct *thisboard = comedi_board(dev);
- struct comedi_subdevice *s;
- unsigned long iobase = 0;
- struct pcmcia_device *link;
- int ret;
-
- /* get base address, irq etc. based on bustype */
- switch (thisboard->bustype) {
- case pcmcia_bustype:
- link = pcmcia_cur_dev; /* XXX hack */
- if (!link)
- return -EIO;
- iobase = link->resource[0]->start;
- break;
- default:
- pr_err("bug! couldn't determine board type\n");
- return -EINVAL;
- break;
- }
- pr_debug("comedi%d: ni_daq_dio24: %s, io 0x%lx", dev->minor,
- thisboard->name, iobase);
-
- if (iobase == 0) {
- pr_err("io base address is zero!\n");
- return -EINVAL;
- }
-
- dev->iobase = iobase;
-
- dev->board_name = thisboard->name;
-
- ret = comedi_alloc_subdevices(dev, 1);
- if (ret)
- return ret;
-
- /* 8255 dio */
- s = &dev->subdevices[0];
- subdev_8255_init(dev, s, NULL, dev->iobase);
-
- return 0;
-};
-
-static void dio24_detach(struct comedi_device *dev)
-{
- if (dev->subdevices)
- subdev_8255_cleanup(dev, &dev->subdevices[0]);
-}
-
-static struct comedi_driver driver_dio24 = {
- .driver_name = "ni_daq_dio24",
- .module = THIS_MODULE,
- .attach = dio24_attach,
- .detach = dio24_detach,
- .num_names = ARRAY_SIZE(dio24_boards),
- .board_name = &dio24_boards[0].name,
- .offset = sizeof(struct dio24_board_struct),
-};
-
static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -149,42 +58,63 @@
return pcmcia_request_io(p_dev);
}
-static int dio24_cs_attach(struct pcmcia_device *link)
+static int dio24_auto_attach(struct comedi_device *dev,
+ unsigned long context)
{
+ struct pcmcia_device *link = comedi_to_pcmcia_dev(dev);
+ struct comedi_subdevice *s;
int ret;
+ dev->board_name = dev->driver->driver_name;
+
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO |
- CONF_AUTO_SET_IO;
+ CONF_AUTO_SET_IO;
ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL);
- if (ret) {
- dev_warn(&link->dev, "no configuration found\n");
- goto failed;
- }
-
- if (!link->irq)
- goto failed;
+ if (ret)
+ return ret;
ret = pcmcia_enable_device(link);
if (ret)
- goto failed;
+ return ret;
+ dev->iobase = link->resource[0]->start;
- pcmcia_cur_dev = link;
+ ret = comedi_alloc_subdevices(dev, 1);
+ if (ret)
+ return ret;
+
+ /* 8255 dio */
+ s = &dev->subdevices[0];
+ ret = subdev_8255_init(dev, s, NULL, dev->iobase);
+ if (ret)
+ return ret;
return 0;
-
-failed:
- pcmcia_disable_device(link);
- return ret;
}
-static void dio24_cs_detach(struct pcmcia_device *link)
+static void dio24_detach(struct comedi_device *dev)
{
- pcmcia_disable_device(link);
+ struct pcmcia_device *link = comedi_to_pcmcia_dev(dev);
+
+ if (dev->subdevices)
+ subdev_8255_cleanup(dev, &dev->subdevices[0]);
+ if (dev->iobase)
+ pcmcia_disable_device(link);
+}
+
+static struct comedi_driver driver_dio24 = {
+ .driver_name = "ni_daq_dio24",
+ .module = THIS_MODULE,
+ .auto_attach = dio24_auto_attach,
+ .detach = dio24_detach,
+};
+
+static int dio24_cs_attach(struct pcmcia_device *link)
+{
+ return comedi_pcmcia_auto_config(link, &driver_dio24);
}
static const struct pcmcia_device_id dio24_cs_ids[] = {
- /* N.B. These IDs should match those in dio24_boards */
PCMCIA_DEVICE_MANF_CARD(0x010b, 0x475c), /* daqcard-dio24 */
PCMCIA_DEVICE_NULL
};
@@ -195,7 +125,7 @@
.owner = THIS_MODULE,
.id_table = dio24_cs_ids,
.probe = dio24_cs_attach,
- .remove = dio24_cs_detach,
+ .remove = comedi_pcmcia_auto_unconfig,
};
module_comedi_pcmcia_driver(driver_dio24, dio24_cs_driver);