| /* |
| * arch/powerpc/kernel/mpic.c |
| * |
| * Driver for interrupt controllers following the OpenPIC standard, the |
| * common implementation beeing IBM's MPIC. This driver also can deal |
| * with various broken implementations of this HW. |
| * |
| * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp. |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive |
| * for more details. |
| */ |
| |
| #undef DEBUG |
| #undef DEBUG_IPI |
| #undef DEBUG_IRQ |
| #undef DEBUG_LOW |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/bootmem.h> |
| #include <linux/spinlock.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/ratelimit.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/signal.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/irq.h> |
| #include <asm/machdep.h> |
| #include <asm/mpic.h> |
| #include <asm/smp.h> |
| |
| #include "mpic.h" |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) printk(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| static struct mpic *mpics; |
| static struct mpic *mpic_primary; |
| static DEFINE_RAW_SPINLOCK(mpic_lock); |
| |
| #ifdef CONFIG_PPC32 /* XXX for now */ |
| #ifdef CONFIG_IRQ_ALL_CPUS |
| #define distribute_irqs (1) |
| #else |
| #define distribute_irqs (0) |
| #endif |
| #endif |
| |
| #ifdef CONFIG_MPIC_WEIRD |
| static u32 mpic_infos[][MPIC_IDX_END] = { |
| [0] = { /* Original OpenPIC compatible MPIC */ |
| MPIC_GREG_BASE, |
| MPIC_GREG_FEATURE_0, |
| MPIC_GREG_GLOBAL_CONF_0, |
| MPIC_GREG_VENDOR_ID, |
| MPIC_GREG_IPI_VECTOR_PRI_0, |
| MPIC_GREG_IPI_STRIDE, |
| MPIC_GREG_SPURIOUS, |
| MPIC_GREG_TIMER_FREQ, |
| |
| MPIC_TIMER_BASE, |
| MPIC_TIMER_STRIDE, |
| MPIC_TIMER_CURRENT_CNT, |
| MPIC_TIMER_BASE_CNT, |
| MPIC_TIMER_VECTOR_PRI, |
| MPIC_TIMER_DESTINATION, |
| |
| MPIC_CPU_BASE, |
| MPIC_CPU_STRIDE, |
| MPIC_CPU_IPI_DISPATCH_0, |
| MPIC_CPU_IPI_DISPATCH_STRIDE, |
| MPIC_CPU_CURRENT_TASK_PRI, |
| MPIC_CPU_WHOAMI, |
| MPIC_CPU_INTACK, |
| MPIC_CPU_EOI, |
| MPIC_CPU_MCACK, |
| |
| MPIC_IRQ_BASE, |
| MPIC_IRQ_STRIDE, |
| MPIC_IRQ_VECTOR_PRI, |
| MPIC_VECPRI_VECTOR_MASK, |
| MPIC_VECPRI_POLARITY_POSITIVE, |
| MPIC_VECPRI_POLARITY_NEGATIVE, |
| MPIC_VECPRI_SENSE_LEVEL, |
| MPIC_VECPRI_SENSE_EDGE, |
| MPIC_VECPRI_POLARITY_MASK, |
| MPIC_VECPRI_SENSE_MASK, |
| MPIC_IRQ_DESTINATION |
| }, |
| [1] = { /* Tsi108/109 PIC */ |
| TSI108_GREG_BASE, |
| TSI108_GREG_FEATURE_0, |
| TSI108_GREG_GLOBAL_CONF_0, |
| TSI108_GREG_VENDOR_ID, |
| TSI108_GREG_IPI_VECTOR_PRI_0, |
| TSI108_GREG_IPI_STRIDE, |
| TSI108_GREG_SPURIOUS, |
| TSI108_GREG_TIMER_FREQ, |
| |
| TSI108_TIMER_BASE, |
| TSI108_TIMER_STRIDE, |
| TSI108_TIMER_CURRENT_CNT, |
| TSI108_TIMER_BASE_CNT, |
| TSI108_TIMER_VECTOR_PRI, |
| TSI108_TIMER_DESTINATION, |
| |
| TSI108_CPU_BASE, |
| TSI108_CPU_STRIDE, |
| TSI108_CPU_IPI_DISPATCH_0, |
| TSI108_CPU_IPI_DISPATCH_STRIDE, |
| TSI108_CPU_CURRENT_TASK_PRI, |
| TSI108_CPU_WHOAMI, |
| TSI108_CPU_INTACK, |
| TSI108_CPU_EOI, |
| TSI108_CPU_MCACK, |
| |
| TSI108_IRQ_BASE, |
| TSI108_IRQ_STRIDE, |
| TSI108_IRQ_VECTOR_PRI, |
| TSI108_VECPRI_VECTOR_MASK, |
| TSI108_VECPRI_POLARITY_POSITIVE, |
| TSI108_VECPRI_POLARITY_NEGATIVE, |
| TSI108_VECPRI_SENSE_LEVEL, |
| TSI108_VECPRI_SENSE_EDGE, |
| TSI108_VECPRI_POLARITY_MASK, |
| TSI108_VECPRI_SENSE_MASK, |
| TSI108_IRQ_DESTINATION |
| }, |
| }; |
| |
| #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name] |
| |
| #else /* CONFIG_MPIC_WEIRD */ |
| |
| #define MPIC_INFO(name) MPIC_##name |
| |
| #endif /* CONFIG_MPIC_WEIRD */ |
| |
| static inline unsigned int mpic_processor_id(struct mpic *mpic) |
| { |
| unsigned int cpu = 0; |
| |
| if (!(mpic->flags & MPIC_SECONDARY)) |
| cpu = hard_smp_processor_id(); |
| |
| return cpu; |
| } |
| |
| /* |
| * Register accessor functions |
| */ |
| |
| |
| static inline u32 _mpic_read(enum mpic_reg_type type, |
| struct mpic_reg_bank *rb, |
| unsigned int reg) |
| { |
| switch(type) { |
| #ifdef CONFIG_PPC_DCR |
| case mpic_access_dcr: |
| return dcr_read(rb->dhost, reg); |
| #endif |
| case mpic_access_mmio_be: |
| return in_be32(rb->base + (reg >> 2)); |
| case mpic_access_mmio_le: |
| default: |
| return in_le32(rb->base + (reg >> 2)); |
| } |
| } |
| |
| static inline void _mpic_write(enum mpic_reg_type type, |
| struct mpic_reg_bank *rb, |
| unsigned int reg, u32 value) |
| { |
| switch(type) { |
| #ifdef CONFIG_PPC_DCR |
| case mpic_access_dcr: |
| dcr_write(rb->dhost, reg, value); |
| break; |
| #endif |
| case mpic_access_mmio_be: |
| out_be32(rb->base + (reg >> 2), value); |
| break; |
| case mpic_access_mmio_le: |
| default: |
| out_le32(rb->base + (reg >> 2), value); |
| break; |
| } |
| } |
| |
| static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi) |
| { |
| enum mpic_reg_type type = mpic->reg_type; |
| unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) + |
| (ipi * MPIC_INFO(GREG_IPI_STRIDE)); |
| |
| if ((mpic->flags & MPIC_BROKEN_IPI) && type == mpic_access_mmio_le) |
| type = mpic_access_mmio_be; |
| return _mpic_read(type, &mpic->gregs, offset); |
| } |
| |
| static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 value) |
| { |
| unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) + |
| (ipi * MPIC_INFO(GREG_IPI_STRIDE)); |
| |
| _mpic_write(mpic->reg_type, &mpic->gregs, offset, value); |
| } |
| |
| static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm) |
| { |
| unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) + |
| ((tm & 3) * MPIC_INFO(TIMER_STRIDE)); |
| |
| if (tm >= 4) |
| offset += 0x1000 / 4; |
| |
| return _mpic_read(mpic->reg_type, &mpic->tmregs, offset); |
| } |
| |
| static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value) |
| { |
| unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) + |
| ((tm & 3) * MPIC_INFO(TIMER_STRIDE)); |
| |
| if (tm >= 4) |
| offset += 0x1000 / 4; |
| |
| _mpic_write(mpic->reg_type, &mpic->tmregs, offset, value); |
| } |
| |
| static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg) |
| { |
| unsigned int cpu = mpic_processor_id(mpic); |
| |
| return _mpic_read(mpic->reg_type, &mpic->cpuregs[cpu], reg); |
| } |
| |
| static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 value) |
| { |
| unsigned int cpu = mpic_processor_id(mpic); |
| |
| _mpic_write(mpic->reg_type, &mpic->cpuregs[cpu], reg, value); |
| } |
| |
| static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigned int reg) |
| { |
| unsigned int isu = src_no >> mpic->isu_shift; |
| unsigned int idx = src_no & mpic->isu_mask; |
| unsigned int val; |
| |
| val = _mpic_read(mpic->reg_type, &mpic->isus[isu], |
| reg + (idx * MPIC_INFO(IRQ_STRIDE))); |
| #ifdef CONFIG_MPIC_BROKEN_REGREAD |
| if (reg == 0) |
| val = (val & (MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY)) | |
| mpic->isu_reg0_shadow[src_no]; |
| #endif |
| return val; |
| } |
| |
| static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, |
| unsigned int reg, u32 value) |
| { |
| unsigned int isu = src_no >> mpic->isu_shift; |
| unsigned int idx = src_no & mpic->isu_mask; |
| |
| _mpic_write(mpic->reg_type, &mpic->isus[isu], |
| reg + (idx * MPIC_INFO(IRQ_STRIDE)), value); |
| |
| #ifdef CONFIG_MPIC_BROKEN_REGREAD |
| if (reg == 0) |
| mpic->isu_reg0_shadow[src_no] = |
| value & ~(MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY); |
| #endif |
| } |
| |
| #define mpic_read(b,r) _mpic_read(mpic->reg_type,&(b),(r)) |
| #define mpic_write(b,r,v) _mpic_write(mpic->reg_type,&(b),(r),(v)) |
| #define mpic_ipi_read(i) _mpic_ipi_read(mpic,(i)) |
| #define mpic_ipi_write(i,v) _mpic_ipi_write(mpic,(i),(v)) |
| #define mpic_tm_read(i) _mpic_tm_read(mpic,(i)) |
| #define mpic_tm_write(i,v) _mpic_tm_write(mpic,(i),(v)) |
| #define mpic_cpu_read(i) _mpic_cpu_read(mpic,(i)) |
| #define mpic_cpu_write(i,v) _mpic_cpu_write(mpic,(i),(v)) |
| #define mpic_irq_read(s,r) _mpic_irq_read(mpic,(s),(r)) |
| #define mpic_irq_write(s,r,v) _mpic_irq_write(mpic,(s),(r),(v)) |
| |
| |
| /* |
| * Low level utility functions |
| */ |
| |
| |
| static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr, |
| struct mpic_reg_bank *rb, unsigned int offset, |
| unsigned int size) |
| { |
| rb->base = ioremap(phys_addr + offset, size); |
| BUG_ON(rb->base == NULL); |
| } |
| |
| #ifdef CONFIG_PPC_DCR |
| static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb, |
| unsigned int offset, unsigned int size) |
| { |
| phys_addr_t phys_addr = dcr_resource_start(mpic->node, 0); |
| rb->dhost = dcr_map(mpic->node, phys_addr + offset, size); |
| BUG_ON(!DCR_MAP_OK(rb->dhost)); |
| } |
| |
| static inline void mpic_map(struct mpic *mpic, |
| phys_addr_t phys_addr, struct mpic_reg_bank *rb, |
| unsigned int offset, unsigned int size) |
| { |
| if (mpic->flags & MPIC_USES_DCR) |
| _mpic_map_dcr(mpic, rb, offset, size); |
| else |
| _mpic_map_mmio(mpic, phys_addr, rb, offset, size); |
| } |
| #else /* CONFIG_PPC_DCR */ |
| #define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s) |
| #endif /* !CONFIG_PPC_DCR */ |
| |
| |
| |
| /* Check if we have one of those nice broken MPICs with a flipped endian on |
| * reads from IPI registers |
| */ |
| static void __init mpic_test_broken_ipi(struct mpic *mpic) |
| { |
| u32 r; |
| |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_IPI_VECTOR_PRI_0), MPIC_VECPRI_MASK); |
| r = mpic_read(mpic->gregs, MPIC_INFO(GREG_IPI_VECTOR_PRI_0)); |
| |
| if (r == le32_to_cpu(MPIC_VECPRI_MASK)) { |
| printk(KERN_INFO "mpic: Detected reversed IPI registers\n"); |
| mpic->flags |= MPIC_BROKEN_IPI; |
| } |
| } |
| |
| #ifdef CONFIG_MPIC_U3_HT_IRQS |
| |
| /* Test if an interrupt is sourced from HyperTransport (used on broken U3s) |
| * to force the edge setting on the MPIC and do the ack workaround. |
| */ |
| static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source) |
| { |
| if (source >= 128 || !mpic->fixups) |
| return 0; |
| return mpic->fixups[source].base != NULL; |
| } |
| |
| |
| static inline void mpic_ht_end_irq(struct mpic *mpic, unsigned int source) |
| { |
| struct mpic_irq_fixup *fixup = &mpic->fixups[source]; |
| |
| if (fixup->applebase) { |
| unsigned int soff = (fixup->index >> 3) & ~3; |
| unsigned int mask = 1U << (fixup->index & 0x1f); |
| writel(mask, fixup->applebase + soff); |
| } else { |
| raw_spin_lock(&mpic->fixup_lock); |
| writeb(0x11 + 2 * fixup->index, fixup->base + 2); |
| writel(fixup->data, fixup->base + 4); |
| raw_spin_unlock(&mpic->fixup_lock); |
| } |
| } |
| |
| static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source, |
| bool level) |
| { |
| struct mpic_irq_fixup *fixup = &mpic->fixups[source]; |
| unsigned long flags; |
| u32 tmp; |
| |
| if (fixup->base == NULL) |
| return; |
| |
| DBG("startup_ht_interrupt(0x%x) index: %d\n", |
| source, fixup->index); |
| raw_spin_lock_irqsave(&mpic->fixup_lock, flags); |
| /* Enable and configure */ |
| writeb(0x10 + 2 * fixup->index, fixup->base + 2); |
| tmp = readl(fixup->base + 4); |
| tmp &= ~(0x23U); |
| if (level) |
| tmp |= 0x22; |
| writel(tmp, fixup->base + 4); |
| raw_spin_unlock_irqrestore(&mpic->fixup_lock, flags); |
| |
| #ifdef CONFIG_PM |
| /* use the lowest bit inverted to the actual HW, |
| * set if this fixup was enabled, clear otherwise */ |
| mpic->save_data[source].fixup_data = tmp | 1; |
| #endif |
| } |
| |
| static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source) |
| { |
| struct mpic_irq_fixup *fixup = &mpic->fixups[source]; |
| unsigned long flags; |
| u32 tmp; |
| |
| if (fixup->base == NULL) |
| return; |
| |
| DBG("shutdown_ht_interrupt(0x%x)\n", source); |
| |
| /* Disable */ |
| raw_spin_lock_irqsave(&mpic->fixup_lock, flags); |
| writeb(0x10 + 2 * fixup->index, fixup->base + 2); |
| tmp = readl(fixup->base + 4); |
| tmp |= 1; |
| writel(tmp, fixup->base + 4); |
| raw_spin_unlock_irqrestore(&mpic->fixup_lock, flags); |
| |
| #ifdef CONFIG_PM |
| /* use the lowest bit inverted to the actual HW, |
| * set if this fixup was enabled, clear otherwise */ |
| mpic->save_data[source].fixup_data = tmp & ~1; |
| #endif |
| } |
| |
| #ifdef CONFIG_PCI_MSI |
| static void __init mpic_scan_ht_msi(struct mpic *mpic, u8 __iomem *devbase, |
| unsigned int devfn) |
| { |
| u8 __iomem *base; |
| u8 pos, flags; |
| u64 addr = 0; |
| |
| for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0; |
| pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) { |
| u8 id = readb(devbase + pos + PCI_CAP_LIST_ID); |
| if (id == PCI_CAP_ID_HT) { |
| id = readb(devbase + pos + 3); |
| if ((id & HT_5BIT_CAP_MASK) == HT_CAPTYPE_MSI_MAPPING) |
| break; |
| } |
| } |
| |
| if (pos == 0) |
| return; |
| |
| base = devbase + pos; |
| |
| flags = readb(base + HT_MSI_FLAGS); |
| if (!(flags & HT_MSI_FLAGS_FIXED)) { |
| addr = readl(base + HT_MSI_ADDR_LO) & HT_MSI_ADDR_LO_MASK; |
| addr = addr | ((u64)readl(base + HT_MSI_ADDR_HI) << 32); |
| } |
| |
| printk(KERN_DEBUG "mpic: - HT:%02x.%x %s MSI mapping found @ 0x%llx\n", |
| PCI_SLOT(devfn), PCI_FUNC(devfn), |
| flags & HT_MSI_FLAGS_ENABLE ? "enabled" : "disabled", addr); |
| |
| if (!(flags & HT_MSI_FLAGS_ENABLE)) |
| writeb(flags | HT_MSI_FLAGS_ENABLE, base + HT_MSI_FLAGS); |
| } |
| #else |
| static void __init mpic_scan_ht_msi(struct mpic *mpic, u8 __iomem *devbase, |
| unsigned int devfn) |
| { |
| return; |
| } |
| #endif |
| |
| static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase, |
| unsigned int devfn, u32 vdid) |
| { |
| int i, irq, n; |
| u8 __iomem *base; |
| u32 tmp; |
| u8 pos; |
| |
| for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0; |
| pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) { |
| u8 id = readb(devbase + pos + PCI_CAP_LIST_ID); |
| if (id == PCI_CAP_ID_HT) { |
| id = readb(devbase + pos + 3); |
| if ((id & HT_5BIT_CAP_MASK) == HT_CAPTYPE_IRQ) |
| break; |
| } |
| } |
| if (pos == 0) |
| return; |
| |
| base = devbase + pos; |
| writeb(0x01, base + 2); |
| n = (readl(base + 4) >> 16) & 0xff; |
| |
| printk(KERN_INFO "mpic: - HT:%02x.%x [0x%02x] vendor %04x device %04x" |
| " has %d irqs\n", |
| devfn >> 3, devfn & 0x7, pos, vdid & 0xffff, vdid >> 16, n + 1); |
| |
| for (i = 0; i <= n; i++) { |
| writeb(0x10 + 2 * i, base + 2); |
| tmp = readl(base + 4); |
| irq = (tmp >> 16) & 0xff; |
| DBG("HT PIC index 0x%x, irq 0x%x, tmp: %08x\n", i, irq, tmp); |
| /* mask it , will be unmasked later */ |
| tmp |= 0x1; |
| writel(tmp, base + 4); |
| mpic->fixups[irq].index = i; |
| mpic->fixups[irq].base = base; |
| /* Apple HT PIC has a non-standard way of doing EOIs */ |
| if ((vdid & 0xffff) == 0x106b) |
| mpic->fixups[irq].applebase = devbase + 0x60; |
| else |
| mpic->fixups[irq].applebase = NULL; |
| writeb(0x11 + 2 * i, base + 2); |
| mpic->fixups[irq].data = readl(base + 4) | 0x80000000; |
| } |
| } |
| |
| |
| static void __init mpic_scan_ht_pics(struct mpic *mpic) |
| { |
| unsigned int devfn; |
| u8 __iomem *cfgspace; |
| |
| printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n"); |
| |
| /* Allocate fixups array */ |
| mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL); |
| BUG_ON(mpic->fixups == NULL); |
| |
| /* Init spinlock */ |
| raw_spin_lock_init(&mpic->fixup_lock); |
| |
| /* Map U3 config space. We assume all IO-APICs are on the primary bus |
| * so we only need to map 64kB. |
| */ |
| cfgspace = ioremap(0xf2000000, 0x10000); |
| BUG_ON(cfgspace == NULL); |
| |
| /* Now we scan all slots. We do a very quick scan, we read the header |
| * type, vendor ID and device ID only, that's plenty enough |
| */ |
| for (devfn = 0; devfn < 0x100; devfn++) { |
| u8 __iomem *devbase = cfgspace + (devfn << 8); |
| u8 hdr_type = readb(devbase + PCI_HEADER_TYPE); |
| u32 l = readl(devbase + PCI_VENDOR_ID); |
| u16 s; |
| |
| DBG("devfn %x, l: %x\n", devfn, l); |
| |
| /* If no device, skip */ |
| if (l == 0xffffffff || l == 0x00000000 || |
| l == 0x0000ffff || l == 0xffff0000) |
| goto next; |
| /* Check if is supports capability lists */ |
| s = readw(devbase + PCI_STATUS); |
| if (!(s & PCI_STATUS_CAP_LIST)) |
| goto next; |
| |
| mpic_scan_ht_pic(mpic, devbase, devfn, l); |
| mpic_scan_ht_msi(mpic, devbase, devfn); |
| |
| next: |
| /* next device, if function 0 */ |
| if (PCI_FUNC(devfn) == 0 && (hdr_type & 0x80) == 0) |
| devfn += 7; |
| } |
| } |
| |
| #else /* CONFIG_MPIC_U3_HT_IRQS */ |
| |
| static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source) |
| { |
| return 0; |
| } |
| |
| static void __init mpic_scan_ht_pics(struct mpic *mpic) |
| { |
| } |
| |
| #endif /* CONFIG_MPIC_U3_HT_IRQS */ |
| |
| /* Find an mpic associated with a given linux interrupt */ |
| static struct mpic *mpic_find(unsigned int irq) |
| { |
| if (irq < NUM_ISA_INTERRUPTS) |
| return NULL; |
| |
| return irq_get_chip_data(irq); |
| } |
| |
| /* Determine if the linux irq is an IPI */ |
| static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int src) |
| { |
| return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]); |
| } |
| |
| /* Determine if the linux irq is a timer */ |
| static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int src) |
| { |
| return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]); |
| } |
| |
| /* Convert a cpu mask from logical to physical cpu numbers. */ |
| static inline u32 mpic_physmask(u32 cpumask) |
| { |
| int i; |
| u32 mask = 0; |
| |
| for (i = 0; i < min(32, NR_CPUS); ++i, cpumask >>= 1) |
| mask |= (cpumask & 1) << get_hard_smp_processor_id(i); |
| return mask; |
| } |
| |
| #ifdef CONFIG_SMP |
| /* Get the mpic structure from the IPI number */ |
| static inline struct mpic * mpic_from_ipi(struct irq_data *d) |
| { |
| return irq_data_get_irq_chip_data(d); |
| } |
| #endif |
| |
| /* Get the mpic structure from the irq number */ |
| static inline struct mpic * mpic_from_irq(unsigned int irq) |
| { |
| return irq_get_chip_data(irq); |
| } |
| |
| /* Get the mpic structure from the irq data */ |
| static inline struct mpic * mpic_from_irq_data(struct irq_data *d) |
| { |
| return irq_data_get_irq_chip_data(d); |
| } |
| |
| /* Send an EOI */ |
| static inline void mpic_eoi(struct mpic *mpic) |
| { |
| mpic_cpu_write(MPIC_INFO(CPU_EOI), 0); |
| (void)mpic_cpu_read(MPIC_INFO(CPU_WHOAMI)); |
| } |
| |
| /* |
| * Linux descriptor level callbacks |
| */ |
| |
| |
| void mpic_unmask_irq(struct irq_data *d) |
| { |
| unsigned int loops = 100000; |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = irqd_to_hwirq(d); |
| |
| DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, d->irq, src); |
| |
| mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), |
| mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & |
| ~MPIC_VECPRI_MASK); |
| /* make sure mask gets to controller before we return to user */ |
| do { |
| if (!loops--) { |
| printk(KERN_ERR "%s: timeout on hwirq %u\n", |
| __func__, src); |
| break; |
| } |
| } while(mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & MPIC_VECPRI_MASK); |
| } |
| |
| void mpic_mask_irq(struct irq_data *d) |
| { |
| unsigned int loops = 100000; |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = irqd_to_hwirq(d); |
| |
| DBG("%s: disable_irq: %d (src %d)\n", mpic->name, d->irq, src); |
| |
| mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), |
| mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) | |
| MPIC_VECPRI_MASK); |
| |
| /* make sure mask gets to controller before we return to user */ |
| do { |
| if (!loops--) { |
| printk(KERN_ERR "%s: timeout on hwirq %u\n", |
| __func__, src); |
| break; |
| } |
| } while(!(mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & MPIC_VECPRI_MASK)); |
| } |
| |
| void mpic_end_irq(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| |
| #ifdef DEBUG_IRQ |
| DBG("%s: end_irq: %d\n", mpic->name, d->irq); |
| #endif |
| /* We always EOI on end_irq() even for edge interrupts since that |
| * should only lower the priority, the MPIC should have properly |
| * latched another edge interrupt coming in anyway |
| */ |
| |
| mpic_eoi(mpic); |
| } |
| |
| #ifdef CONFIG_MPIC_U3_HT_IRQS |
| |
| static void mpic_unmask_ht_irq(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = irqd_to_hwirq(d); |
| |
| mpic_unmask_irq(d); |
| |
| if (irqd_is_level_type(d)) |
| mpic_ht_end_irq(mpic, src); |
| } |
| |
| static unsigned int mpic_startup_ht_irq(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = irqd_to_hwirq(d); |
| |
| mpic_unmask_irq(d); |
| mpic_startup_ht_interrupt(mpic, src, irqd_is_level_type(d)); |
| |
| return 0; |
| } |
| |
| static void mpic_shutdown_ht_irq(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = irqd_to_hwirq(d); |
| |
| mpic_shutdown_ht_interrupt(mpic, src); |
| mpic_mask_irq(d); |
| } |
| |
| static void mpic_end_ht_irq(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = irqd_to_hwirq(d); |
| |
| #ifdef DEBUG_IRQ |
| DBG("%s: end_irq: %d\n", mpic->name, d->irq); |
| #endif |
| /* We always EOI on end_irq() even for edge interrupts since that |
| * should only lower the priority, the MPIC should have properly |
| * latched another edge interrupt coming in anyway |
| */ |
| |
| if (irqd_is_level_type(d)) |
| mpic_ht_end_irq(mpic, src); |
| mpic_eoi(mpic); |
| } |
| #endif /* !CONFIG_MPIC_U3_HT_IRQS */ |
| |
| #ifdef CONFIG_SMP |
| |
| static void mpic_unmask_ipi(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_ipi(d); |
| unsigned int src = virq_to_hw(d->irq) - mpic->ipi_vecs[0]; |
| |
| DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, d->irq, src); |
| mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK); |
| } |
| |
| static void mpic_mask_ipi(struct irq_data *d) |
| { |
| /* NEVER disable an IPI... that's just plain wrong! */ |
| } |
| |
| static void mpic_end_ipi(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_ipi(d); |
| |
| /* |
| * IPIs are marked IRQ_PER_CPU. This has the side effect of |
| * preventing the IRQ_PENDING/IRQ_INPROGRESS logic from |
| * applying to them. We EOI them late to avoid re-entering. |
| */ |
| mpic_eoi(mpic); |
| } |
| |
| #endif /* CONFIG_SMP */ |
| |
| static void mpic_unmask_tm(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0]; |
| |
| DBG("%s: enable_tm: %d (tm %d)\n", mpic->name, d->irq, src); |
| mpic_tm_write(src, mpic_tm_read(src) & ~MPIC_VECPRI_MASK); |
| mpic_tm_read(src); |
| } |
| |
| static void mpic_mask_tm(struct irq_data *d) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0]; |
| |
| mpic_tm_write(src, mpic_tm_read(src) | MPIC_VECPRI_MASK); |
| mpic_tm_read(src); |
| } |
| |
| int mpic_set_affinity(struct irq_data *d, const struct cpumask *cpumask, |
| bool force) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = irqd_to_hwirq(d); |
| |
| if (mpic->flags & MPIC_SINGLE_DEST_CPU) { |
| int cpuid = irq_choose_cpu(cpumask); |
| |
| mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid); |
| } else { |
| u32 mask = cpumask_bits(cpumask)[0]; |
| |
| mask &= cpumask_bits(cpu_online_mask)[0]; |
| |
| mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), |
| mpic_physmask(mask)); |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) |
| { |
| /* Now convert sense value */ |
| switch(type & IRQ_TYPE_SENSE_MASK) { |
| case IRQ_TYPE_EDGE_RISING: |
| return MPIC_INFO(VECPRI_SENSE_EDGE) | |
| MPIC_INFO(VECPRI_POLARITY_POSITIVE); |
| case IRQ_TYPE_EDGE_FALLING: |
| case IRQ_TYPE_EDGE_BOTH: |
| return MPIC_INFO(VECPRI_SENSE_EDGE) | |
| MPIC_INFO(VECPRI_POLARITY_NEGATIVE); |
| case IRQ_TYPE_LEVEL_HIGH: |
| return MPIC_INFO(VECPRI_SENSE_LEVEL) | |
| MPIC_INFO(VECPRI_POLARITY_POSITIVE); |
| case IRQ_TYPE_LEVEL_LOW: |
| default: |
| return MPIC_INFO(VECPRI_SENSE_LEVEL) | |
| MPIC_INFO(VECPRI_POLARITY_NEGATIVE); |
| } |
| } |
| |
| int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) |
| { |
| struct mpic *mpic = mpic_from_irq_data(d); |
| unsigned int src = irqd_to_hwirq(d); |
| unsigned int vecpri, vold, vnew; |
| |
| DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n", |
| mpic, d->irq, src, flow_type); |
| |
| if (src >= mpic->num_sources) |
| return -EINVAL; |
| |
| vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); |
| |
| /* We don't support "none" type */ |
| if (flow_type == IRQ_TYPE_NONE) |
| flow_type = IRQ_TYPE_DEFAULT; |
| |
| /* Default: read HW settings */ |
| if (flow_type == IRQ_TYPE_DEFAULT) { |
| switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | |
| MPIC_INFO(VECPRI_SENSE_MASK))) { |
| case MPIC_INFO(VECPRI_SENSE_EDGE) | |
| MPIC_INFO(VECPRI_POLARITY_POSITIVE): |
| flow_type = IRQ_TYPE_EDGE_RISING; |
| break; |
| case MPIC_INFO(VECPRI_SENSE_EDGE) | |
| MPIC_INFO(VECPRI_POLARITY_NEGATIVE): |
| flow_type = IRQ_TYPE_EDGE_FALLING; |
| break; |
| case MPIC_INFO(VECPRI_SENSE_LEVEL) | |
| MPIC_INFO(VECPRI_POLARITY_POSITIVE): |
| flow_type = IRQ_TYPE_LEVEL_HIGH; |
| break; |
| case MPIC_INFO(VECPRI_SENSE_LEVEL) | |
| MPIC_INFO(VECPRI_POLARITY_NEGATIVE): |
| flow_type = IRQ_TYPE_LEVEL_LOW; |
| break; |
| } |
| } |
| |
| /* Apply to irq desc */ |
| irqd_set_trigger_type(d, flow_type); |
| |
| /* Apply to HW */ |
| if (mpic_is_ht_interrupt(mpic, src)) |
| vecpri = MPIC_VECPRI_POLARITY_POSITIVE | |
| MPIC_VECPRI_SENSE_EDGE; |
| else |
| vecpri = mpic_type_to_vecpri(mpic, flow_type); |
| |
| vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) | |
| MPIC_INFO(VECPRI_SENSE_MASK)); |
| vnew |= vecpri; |
| if (vold != vnew) |
| mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vnew); |
| |
| return IRQ_SET_MASK_OK_NOCOPY; |
| } |
| |
| void mpic_set_vector(unsigned int virq, unsigned int vector) |
| { |
| struct mpic *mpic = mpic_from_irq(virq); |
| unsigned int src = virq_to_hw(virq); |
| unsigned int vecpri; |
| |
| DBG("mpic: set_vector(mpic:@%p,virq:%d,src:%d,vector:0x%x)\n", |
| mpic, virq, src, vector); |
| |
| if (src >= mpic->num_sources) |
| return; |
| |
| vecpri = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); |
| vecpri = vecpri & ~MPIC_INFO(VECPRI_VECTOR_MASK); |
| vecpri |= vector; |
| mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vecpri); |
| } |
| |
| void mpic_set_destination(unsigned int virq, unsigned int cpuid) |
| { |
| struct mpic *mpic = mpic_from_irq(virq); |
| unsigned int src = virq_to_hw(virq); |
| |
| DBG("mpic: set_destination(mpic:@%p,virq:%d,src:%d,cpuid:0x%x)\n", |
| mpic, virq, src, cpuid); |
| |
| if (src >= mpic->num_sources) |
| return; |
| |
| mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid); |
| } |
| |
| static struct irq_chip mpic_irq_chip = { |
| .irq_mask = mpic_mask_irq, |
| .irq_unmask = mpic_unmask_irq, |
| .irq_eoi = mpic_end_irq, |
| .irq_set_type = mpic_set_irq_type, |
| }; |
| |
| #ifdef CONFIG_SMP |
| static struct irq_chip mpic_ipi_chip = { |
| .irq_mask = mpic_mask_ipi, |
| .irq_unmask = mpic_unmask_ipi, |
| .irq_eoi = mpic_end_ipi, |
| }; |
| #endif /* CONFIG_SMP */ |
| |
| static struct irq_chip mpic_tm_chip = { |
| .irq_mask = mpic_mask_tm, |
| .irq_unmask = mpic_unmask_tm, |
| .irq_eoi = mpic_end_irq, |
| }; |
| |
| #ifdef CONFIG_MPIC_U3_HT_IRQS |
| static struct irq_chip mpic_irq_ht_chip = { |
| .irq_startup = mpic_startup_ht_irq, |
| .irq_shutdown = mpic_shutdown_ht_irq, |
| .irq_mask = mpic_mask_irq, |
| .irq_unmask = mpic_unmask_ht_irq, |
| .irq_eoi = mpic_end_ht_irq, |
| .irq_set_type = mpic_set_irq_type, |
| }; |
| #endif /* CONFIG_MPIC_U3_HT_IRQS */ |
| |
| |
| static int mpic_host_match(struct irq_domain *h, struct device_node *node) |
| { |
| /* Exact match, unless mpic node is NULL */ |
| return h->of_node == NULL || h->of_node == node; |
| } |
| |
| static int mpic_host_map(struct irq_domain *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| struct mpic *mpic = h->host_data; |
| struct irq_chip *chip; |
| |
| DBG("mpic: map virq %d, hwirq 0x%lx\n", virq, hw); |
| |
| if (hw == mpic->spurious_vec) |
| return -EINVAL; |
| if (mpic->protected && test_bit(hw, mpic->protected)) |
| return -EINVAL; |
| |
| #ifdef CONFIG_SMP |
| else if (hw >= mpic->ipi_vecs[0]) { |
| WARN_ON(mpic->flags & MPIC_SECONDARY); |
| |
| DBG("mpic: mapping as IPI\n"); |
| irq_set_chip_data(virq, mpic); |
| irq_set_chip_and_handler(virq, &mpic->hc_ipi, |
| handle_percpu_irq); |
| return 0; |
| } |
| #endif /* CONFIG_SMP */ |
| |
| if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) { |
| WARN_ON(mpic->flags & MPIC_SECONDARY); |
| |
| DBG("mpic: mapping as timer\n"); |
| irq_set_chip_data(virq, mpic); |
| irq_set_chip_and_handler(virq, &mpic->hc_tm, |
| handle_fasteoi_irq); |
| return 0; |
| } |
| |
| if (hw >= mpic->num_sources) |
| return -EINVAL; |
| |
| mpic_msi_reserve_hwirq(mpic, hw); |
| |
| /* Default chip */ |
| chip = &mpic->hc_irq; |
| |
| #ifdef CONFIG_MPIC_U3_HT_IRQS |
| /* Check for HT interrupts, override vecpri */ |
| if (mpic_is_ht_interrupt(mpic, hw)) |
| chip = &mpic->hc_ht_irq; |
| #endif /* CONFIG_MPIC_U3_HT_IRQS */ |
| |
| DBG("mpic: mapping to irq chip @%p\n", chip); |
| |
| irq_set_chip_data(virq, mpic); |
| irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq); |
| |
| /* Set default irq type */ |
| irq_set_irq_type(virq, IRQ_TYPE_DEFAULT); |
| |
| /* If the MPIC was reset, then all vectors have already been |
| * initialized. Otherwise, a per source lazy initialization |
| * is done here. |
| */ |
| if (!mpic_is_ipi(mpic, hw) && (mpic->flags & MPIC_NO_RESET)) { |
| mpic_set_vector(virq, hw); |
| mpic_set_destination(virq, mpic_processor_id(mpic)); |
| mpic_irq_set_priority(virq, 8); |
| } |
| |
| return 0; |
| } |
| |
| static int mpic_host_xlate(struct irq_domain *h, struct device_node *ct, |
| const u32 *intspec, unsigned int intsize, |
| irq_hw_number_t *out_hwirq, unsigned int *out_flags) |
| |
| { |
| struct mpic *mpic = h->host_data; |
| static unsigned char map_mpic_senses[4] = { |
| IRQ_TYPE_EDGE_RISING, |
| IRQ_TYPE_LEVEL_LOW, |
| IRQ_TYPE_LEVEL_HIGH, |
| IRQ_TYPE_EDGE_FALLING, |
| }; |
| |
| *out_hwirq = intspec[0]; |
| if (intsize >= 4 && (mpic->flags & MPIC_FSL)) { |
| /* |
| * Freescale MPIC with extended intspec: |
| * First two cells are as usual. Third specifies |
| * an "interrupt type". Fourth is type-specific data. |
| * |
| * See Documentation/devicetree/bindings/powerpc/fsl/mpic.txt |
| */ |
| switch (intspec[2]) { |
| case 0: |
| case 1: /* no EISR/EIMR support for now, treat as shared IRQ */ |
| break; |
| case 2: |
| if (intspec[0] >= ARRAY_SIZE(mpic->ipi_vecs)) |
| return -EINVAL; |
| |
| *out_hwirq = mpic->ipi_vecs[intspec[0]]; |
| break; |
| case 3: |
| if (intspec[0] >= ARRAY_SIZE(mpic->timer_vecs)) |
| return -EINVAL; |
| |
| *out_hwirq = mpic->timer_vecs[intspec[0]]; |
| break; |
| default: |
| pr_debug("%s: unknown irq type %u\n", |
| __func__, intspec[2]); |
| return -EINVAL; |
| } |
| |
| *out_flags = map_mpic_senses[intspec[1] & 3]; |
| } else if (intsize > 1) { |
| u32 mask = 0x3; |
| |
| /* Apple invented a new race of encoding on machines with |
| * an HT APIC. They encode, among others, the index within |
| * the HT APIC. We don't care about it here since thankfully, |
| * it appears that they have the APIC already properly |
| * configured, and thus our current fixup code that reads the |
| * APIC config works fine. However, we still need to mask out |
| * bits in the specifier to make sure we only get bit 0 which |
| * is the level/edge bit (the only sense bit exposed by Apple), |
| * as their bit 1 means something else. |
| */ |
| if (machine_is(powermac)) |
| mask = 0x1; |
| *out_flags = map_mpic_senses[intspec[1] & mask]; |
| } else |
| *out_flags = IRQ_TYPE_NONE; |
| |
| DBG("mpic: xlate (%d cells: 0x%08x 0x%08x) to line 0x%lx sense 0x%x\n", |
| intsize, intspec[0], intspec[1], *out_hwirq, *out_flags); |
| |
| return 0; |
| } |
| |
| /* IRQ handler for a secondary MPIC cascaded from another IRQ controller */ |
| static void mpic_cascade(unsigned int irq, struct irq_desc *desc) |
| { |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| struct mpic *mpic = irq_desc_get_handler_data(desc); |
| unsigned int virq; |
| |
| BUG_ON(!(mpic->flags & MPIC_SECONDARY)); |
| |
| virq = mpic_get_one_irq(mpic); |
| if (virq) |
| generic_handle_irq(virq); |
| |
| chip->irq_eoi(&desc->irq_data); |
| } |
| |
| static struct irq_domain_ops mpic_host_ops = { |
| .match = mpic_host_match, |
| .map = mpic_host_map, |
| .xlate = mpic_host_xlate, |
| }; |
| |
| /* |
| * Exported functions |
| */ |
| |
| struct mpic * __init mpic_alloc(struct device_node *node, |
| phys_addr_t phys_addr, |
| unsigned int flags, |
| unsigned int isu_size, |
| unsigned int irq_count, |
| const char *name) |
| { |
| int i, psize, intvec_top; |
| struct mpic *mpic; |
| u32 greg_feature; |
| const char *vers; |
| const u32 *psrc; |
| u32 last_irq; |
| |
| /* Default MPIC search parameters */ |
| static const struct of_device_id __initconst mpic_device_id[] = { |
| { .type = "open-pic", }, |
| { .compatible = "open-pic", }, |
| {}, |
| }; |
| |
| /* |
| * If we were not passed a device-tree node, then perform the default |
| * search for standardized a standardized OpenPIC. |
| */ |
| if (node) { |
| node = of_node_get(node); |
| } else { |
| node = of_find_matching_node(NULL, mpic_device_id); |
| if (!node) |
| return NULL; |
| } |
| |
| /* Pick the physical address from the device tree if unspecified */ |
| if (!phys_addr) { |
| /* Check if it is DCR-based */ |
| if (of_get_property(node, "dcr-reg", NULL)) { |
| flags |= MPIC_USES_DCR; |
| } else { |
| struct resource r; |
| if (of_address_to_resource(node, 0, &r)) |
| goto err_of_node_put; |
| phys_addr = r.start; |
| } |
| } |
| |
| /* Read extra device-tree properties into the flags variable */ |
| if (of_get_property(node, "big-endian", NULL)) |
| flags |= MPIC_BIG_ENDIAN; |
| if (of_get_property(node, "pic-no-reset", NULL)) |
| flags |= MPIC_NO_RESET; |
| if (of_get_property(node, "single-cpu-affinity", NULL)) |
| flags |= MPIC_SINGLE_DEST_CPU; |
| if (of_device_is_compatible(node, "fsl,mpic")) |
| flags |= MPIC_FSL | MPIC_LARGE_VECTORS; |
| |
| mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL); |
| if (mpic == NULL) |
| goto err_of_node_put; |
| |
| mpic->name = name; |
| mpic->node = node; |
| mpic->paddr = phys_addr; |
| mpic->flags = flags; |
| |
| mpic->hc_irq = mpic_irq_chip; |
| mpic->hc_irq.name = name; |
| if (!(mpic->flags & MPIC_SECONDARY)) |
| mpic->hc_irq.irq_set_affinity = mpic_set_affinity; |
| #ifdef CONFIG_MPIC_U3_HT_IRQS |
| mpic->hc_ht_irq = mpic_irq_ht_chip; |
| mpic->hc_ht_irq.name = name; |
| if (!(mpic->flags & MPIC_SECONDARY)) |
| mpic->hc_ht_irq.irq_set_affinity = mpic_set_affinity; |
| #endif /* CONFIG_MPIC_U3_HT_IRQS */ |
| |
| #ifdef CONFIG_SMP |
| mpic->hc_ipi = mpic_ipi_chip; |
| mpic->hc_ipi.name = name; |
| #endif /* CONFIG_SMP */ |
| |
| mpic->hc_tm = mpic_tm_chip; |
| mpic->hc_tm.name = name; |
| |
| mpic->num_sources = 0; /* so far */ |
| |
| if (mpic->flags & MPIC_LARGE_VECTORS) |
| intvec_top = 2047; |
| else |
| intvec_top = 255; |
| |
| mpic->timer_vecs[0] = intvec_top - 12; |
| mpic->timer_vecs[1] = intvec_top - 11; |
| mpic->timer_vecs[2] = intvec_top - 10; |
| mpic->timer_vecs[3] = intvec_top - 9; |
| mpic->timer_vecs[4] = intvec_top - 8; |
| mpic->timer_vecs[5] = intvec_top - 7; |
| mpic->timer_vecs[6] = intvec_top - 6; |
| mpic->timer_vecs[7] = intvec_top - 5; |
| mpic->ipi_vecs[0] = intvec_top - 4; |
| mpic->ipi_vecs[1] = intvec_top - 3; |
| mpic->ipi_vecs[2] = intvec_top - 2; |
| mpic->ipi_vecs[3] = intvec_top - 1; |
| mpic->spurious_vec = intvec_top; |
| |
| /* Look for protected sources */ |
| psrc = of_get_property(mpic->node, "protected-sources", &psize); |
| if (psrc) { |
| /* Allocate a bitmap with one bit per interrupt */ |
| unsigned int mapsize = BITS_TO_LONGS(intvec_top + 1); |
| mpic->protected = kzalloc(mapsize*sizeof(long), GFP_KERNEL); |
| BUG_ON(mpic->protected == NULL); |
| for (i = 0; i < psize/sizeof(u32); i++) { |
| if (psrc[i] > intvec_top) |
| continue; |
| __set_bit(psrc[i], mpic->protected); |
| } |
| } |
| |
| #ifdef CONFIG_MPIC_WEIRD |
| mpic->hw_set = mpic_infos[MPIC_GET_REGSET(mpic->flags)]; |
| #endif |
| |
| /* default register type */ |
| if (mpic->flags & MPIC_BIG_ENDIAN) |
| mpic->reg_type = mpic_access_mmio_be; |
| else |
| mpic->reg_type = mpic_access_mmio_le; |
| |
| /* |
| * An MPIC with a "dcr-reg" property must be accessed that way, but |
| * only if the kernel includes DCR support. |
| */ |
| #ifdef CONFIG_PPC_DCR |
| if (mpic->flags & MPIC_USES_DCR) |
| mpic->reg_type = mpic_access_dcr; |
| #else |
| BUG_ON(mpic->flags & MPIC_USES_DCR); |
| #endif |
| |
| /* Map the global registers */ |
| mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); |
| mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); |
| |
| /* Reset */ |
| |
| /* When using a device-node, reset requests are only honored if the MPIC |
| * is allowed to reset. |
| */ |
| if (!(mpic->flags & MPIC_NO_RESET)) { |
| printk(KERN_DEBUG "mpic: Resetting\n"); |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), |
| mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) |
| | MPIC_GREG_GCONF_RESET); |
| while( mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) |
| & MPIC_GREG_GCONF_RESET) |
| mb(); |
| } |
| |
| /* CoreInt */ |
| if (mpic->flags & MPIC_ENABLE_COREINT) |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), |
| mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) |
| | MPIC_GREG_GCONF_COREINT); |
| |
| if (mpic->flags & MPIC_ENABLE_MCK) |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), |
| mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) |
| | MPIC_GREG_GCONF_MCK); |
| |
| /* |
| * The MPIC driver will crash if there are more cores than we |
| * can initialize, so we may as well catch that problem here. |
| */ |
| BUG_ON(num_possible_cpus() > MPIC_MAX_CPUS); |
| |
| /* Map the per-CPU registers */ |
| for_each_possible_cpu(i) { |
| unsigned int cpu = get_hard_smp_processor_id(i); |
| |
| mpic_map(mpic, mpic->paddr, &mpic->cpuregs[cpu], |
| MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE), |
| 0x1000); |
| } |
| |
| /* |
| * Read feature register. For non-ISU MPICs, num sources as well. On |
| * ISU MPICs, sources are counted as ISUs are added |
| */ |
| greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); |
| |
| /* |
| * By default, the last source number comes from the MPIC, but the |
| * device-tree and board support code can override it on buggy hw. |
| * If we get passed an isu_size (multi-isu MPIC) then we use that |
| * as a default instead of the value read from the HW. |
| */ |
| last_irq = (greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK) |
| >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT; |
| if (isu_size) |
| last_irq = isu_size * MPIC_MAX_ISU - 1; |
| of_property_read_u32(mpic->node, "last-interrupt-source", &last_irq); |
| if (irq_count) |
| last_irq = irq_count - 1; |
| |
| /* Initialize main ISU if none provided */ |
| if (!isu_size) { |
| isu_size = last_irq + 1; |
| mpic->num_sources = isu_size; |
| mpic_map(mpic, mpic->paddr, &mpic->isus[0], |
| MPIC_INFO(IRQ_BASE), |
| MPIC_INFO(IRQ_STRIDE) * isu_size); |
| } |
| |
| mpic->isu_size = isu_size; |
| mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); |
| mpic->isu_mask = (1 << mpic->isu_shift) - 1; |
| |
| mpic->irqhost = irq_domain_add_linear(mpic->node, |
| last_irq + 1, |
| &mpic_host_ops, mpic); |
| |
| /* |
| * FIXME: The code leaks the MPIC object and mappings here; this |
| * is very unlikely to fail but it ought to be fixed anyways. |
| */ |
| if (mpic->irqhost == NULL) |
| return NULL; |
| |
| /* Display version */ |
| switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) { |
| case 1: |
| vers = "1.0"; |
| break; |
| case 2: |
| vers = "1.2"; |
| break; |
| case 3: |
| vers = "1.3"; |
| break; |
| default: |
| vers = "<unknown>"; |
| break; |
| } |
| printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx," |
| " max %d CPUs\n", |
| name, vers, (unsigned long long)mpic->paddr, num_possible_cpus()); |
| printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n", |
| mpic->isu_size, mpic->isu_shift, mpic->isu_mask); |
| |
| mpic->next = mpics; |
| mpics = mpic; |
| |
| if (!(mpic->flags & MPIC_SECONDARY)) { |
| mpic_primary = mpic; |
| irq_set_default_host(mpic->irqhost); |
| } |
| |
| return mpic; |
| |
| err_of_node_put: |
| of_node_put(node); |
| return NULL; |
| } |
| |
| void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, |
| phys_addr_t paddr) |
| { |
| unsigned int isu_first = isu_num * mpic->isu_size; |
| |
| BUG_ON(isu_num >= MPIC_MAX_ISU); |
| |
| mpic_map(mpic, |
| paddr, &mpic->isus[isu_num], 0, |
| MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); |
| |
| if ((isu_first + mpic->isu_size) > mpic->num_sources) |
| mpic->num_sources = isu_first + mpic->isu_size; |
| } |
| |
| void __init mpic_init(struct mpic *mpic) |
| { |
| int i, cpu; |
| |
| BUG_ON(mpic->num_sources == 0); |
| |
| printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources); |
| |
| /* Set current processor priority to max */ |
| mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); |
| |
| /* Initialize timers to our reserved vectors and mask them for now */ |
| for (i = 0; i < 4; i++) { |
| mpic_write(mpic->tmregs, |
| i * MPIC_INFO(TIMER_STRIDE) + |
| MPIC_INFO(TIMER_DESTINATION), |
| 1 << hard_smp_processor_id()); |
| mpic_write(mpic->tmregs, |
| i * MPIC_INFO(TIMER_STRIDE) + |
| MPIC_INFO(TIMER_VECTOR_PRI), |
| MPIC_VECPRI_MASK | |
| (9 << MPIC_VECPRI_PRIORITY_SHIFT) | |
| (mpic->timer_vecs[0] + i)); |
| } |
| |
| /* Initialize IPIs to our reserved vectors and mark them disabled for now */ |
| mpic_test_broken_ipi(mpic); |
| for (i = 0; i < 4; i++) { |
| mpic_ipi_write(i, |
| MPIC_VECPRI_MASK | |
| (10 << MPIC_VECPRI_PRIORITY_SHIFT) | |
| (mpic->ipi_vecs[0] + i)); |
| } |
| |
| /* Do the HT PIC fixups on U3 broken mpic */ |
| DBG("MPIC flags: %x\n", mpic->flags); |
| if ((mpic->flags & MPIC_U3_HT_IRQS) && !(mpic->flags & MPIC_SECONDARY)) { |
| mpic_scan_ht_pics(mpic); |
| mpic_u3msi_init(mpic); |
| } |
| |
| mpic_pasemi_msi_init(mpic); |
| |
| cpu = mpic_processor_id(mpic); |
| |
| if (!(mpic->flags & MPIC_NO_RESET)) { |
| for (i = 0; i < mpic->num_sources; i++) { |
| /* start with vector = source number, and masked */ |
| u32 vecpri = MPIC_VECPRI_MASK | i | |
| (8 << MPIC_VECPRI_PRIORITY_SHIFT); |
| |
| /* check if protected */ |
| if (mpic->protected && test_bit(i, mpic->protected)) |
| continue; |
| /* init hw */ |
| mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri); |
| mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu); |
| } |
| } |
| |
| /* Init spurious vector */ |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), mpic->spurious_vec); |
| |
| /* Disable 8259 passthrough, if supported */ |
| if (!(mpic->flags & MPIC_NO_PTHROU_DIS)) |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), |
| mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) |
| | MPIC_GREG_GCONF_8259_PTHROU_DIS); |
| |
| if (mpic->flags & MPIC_NO_BIAS) |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), |
| mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) |
| | MPIC_GREG_GCONF_NO_BIAS); |
| |
| /* Set current processor priority to 0 */ |
| mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0); |
| |
| #ifdef CONFIG_PM |
| /* allocate memory to save mpic state */ |
| mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data), |
| GFP_KERNEL); |
| BUG_ON(mpic->save_data == NULL); |
| #endif |
| |
| /* Check if this MPIC is chained from a parent interrupt controller */ |
| if (mpic->flags & MPIC_SECONDARY) { |
| int virq = irq_of_parse_and_map(mpic->node, 0); |
| if (virq != NO_IRQ) { |
| printk(KERN_INFO "%s: hooking up to IRQ %d\n", |
| mpic->node->full_name, virq); |
| irq_set_handler_data(virq, mpic); |
| irq_set_chained_handler(virq, &mpic_cascade); |
| } |
| } |
| } |
| |
| void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) |
| { |
| u32 v; |
| |
| v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); |
| v &= ~MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK; |
| v |= MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(clock_ratio); |
| mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); |
| } |
| |
| void __init mpic_set_serial_int(struct mpic *mpic, int enable) |
| { |
| unsigned long flags; |
| u32 v; |
| |
| raw_spin_lock_irqsave(&mpic_lock, flags); |
| v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); |
| if (enable) |
| v |= MPIC_GREG_GLOBAL_CONF_1_SIE; |
| else |
| v &= ~MPIC_GREG_GLOBAL_CONF_1_SIE; |
| mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); |
| raw_spin_unlock_irqrestore(&mpic_lock, flags); |
| } |
| |
| void mpic_irq_set_priority(unsigned int irq, unsigned int pri) |
| { |
| struct mpic *mpic = mpic_find(irq); |
| unsigned int src = virq_to_hw(irq); |
| unsigned long flags; |
| u32 reg; |
| |
| if (!mpic) |
| return; |
| |
| raw_spin_lock_irqsave(&mpic_lock, flags); |
| if (mpic_is_ipi(mpic, src)) { |
| reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) & |
| ~MPIC_VECPRI_PRIORITY_MASK; |
| mpic_ipi_write(src - mpic->ipi_vecs[0], |
| reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); |
| } else if (mpic_is_tm(mpic, src)) { |
| reg = mpic_tm_read(src - mpic->timer_vecs[0]) & |
| ~MPIC_VECPRI_PRIORITY_MASK; |
| mpic_tm_write(src - mpic->timer_vecs[0], |
| reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); |
| } else { |
| reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) |
| & ~MPIC_VECPRI_PRIORITY_MASK; |
| mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), |
| reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); |
| } |
| raw_spin_unlock_irqrestore(&mpic_lock, flags); |
| } |
| |
| void mpic_setup_this_cpu(void) |
| { |
| #ifdef CONFIG_SMP |
| struct mpic *mpic = mpic_primary; |
| unsigned long flags; |
| u32 msk = 1 << hard_smp_processor_id(); |
| unsigned int i; |
| |
| BUG_ON(mpic == NULL); |
| |
| DBG("%s: setup_this_cpu(%d)\n", mpic->name, hard_smp_processor_id()); |
| |
| raw_spin_lock_irqsave(&mpic_lock, flags); |
| |
| /* let the mpic know we want intrs. default affinity is 0xffffffff |
| * until changed via /proc. That's how it's done on x86. If we want |
| * it differently, then we should make sure we also change the default |
| * values of irq_desc[].affinity in irq.c. |
| */ |
| if (distribute_irqs) { |
| for (i = 0; i < mpic->num_sources ; i++) |
| mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), |
| mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk); |
| } |
| |
| /* Set current processor priority to 0 */ |
| mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0); |
| |
| raw_spin_unlock_irqrestore(&mpic_lock, flags); |
| #endif /* CONFIG_SMP */ |
| } |
| |
| int mpic_cpu_get_priority(void) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| return mpic_cpu_read(MPIC_INFO(CPU_CURRENT_TASK_PRI)); |
| } |
| |
| void mpic_cpu_set_priority(int prio) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| prio &= MPIC_CPU_TASKPRI_MASK; |
| mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio); |
| } |
| |
| void mpic_teardown_this_cpu(int secondary) |
| { |
| struct mpic *mpic = mpic_primary; |
| unsigned long flags; |
| u32 msk = 1 << hard_smp_processor_id(); |
| unsigned int i; |
| |
| BUG_ON(mpic == NULL); |
| |
| DBG("%s: teardown_this_cpu(%d)\n", mpic->name, hard_smp_processor_id()); |
| raw_spin_lock_irqsave(&mpic_lock, flags); |
| |
| /* let the mpic know we don't want intrs. */ |
| for (i = 0; i < mpic->num_sources ; i++) |
| mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), |
| mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) & ~msk); |
| |
| /* Set current processor priority to max */ |
| mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); |
| /* We need to EOI the IPI since not all platforms reset the MPIC |
| * on boot and new interrupts wouldn't get delivered otherwise. |
| */ |
| mpic_eoi(mpic); |
| |
| raw_spin_unlock_irqrestore(&mpic_lock, flags); |
| } |
| |
| |
| static unsigned int _mpic_get_one_irq(struct mpic *mpic, int reg) |
| { |
| u32 src; |
| |
| src = mpic_cpu_read(reg) & MPIC_INFO(VECPRI_VECTOR_MASK); |
| #ifdef DEBUG_LOW |
| DBG("%s: get_one_irq(reg 0x%x): %d\n", mpic->name, reg, src); |
| #endif |
| if (unlikely(src == mpic->spurious_vec)) { |
| if (mpic->flags & MPIC_SPV_EOI) |
| mpic_eoi(mpic); |
| return NO_IRQ; |
| } |
| if (unlikely(mpic->protected && test_bit(src, mpic->protected))) { |
| printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n", |
| mpic->name, (int)src); |
| mpic_eoi(mpic); |
| return NO_IRQ; |
| } |
| |
| return irq_linear_revmap(mpic->irqhost, src); |
| } |
| |
| unsigned int mpic_get_one_irq(struct mpic *mpic) |
| { |
| return _mpic_get_one_irq(mpic, MPIC_INFO(CPU_INTACK)); |
| } |
| |
| unsigned int mpic_get_irq(void) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| BUG_ON(mpic == NULL); |
| |
| return mpic_get_one_irq(mpic); |
| } |
| |
| unsigned int mpic_get_coreint_irq(void) |
| { |
| #ifdef CONFIG_BOOKE |
| struct mpic *mpic = mpic_primary; |
| u32 src; |
| |
| BUG_ON(mpic == NULL); |
| |
| src = mfspr(SPRN_EPR); |
| |
| if (unlikely(src == mpic->spurious_vec)) { |
| if (mpic->flags & MPIC_SPV_EOI) |
| mpic_eoi(mpic); |
| return NO_IRQ; |
| } |
| if (unlikely(mpic->protected && test_bit(src, mpic->protected))) { |
| printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n", |
| mpic->name, (int)src); |
| return NO_IRQ; |
| } |
| |
| return irq_linear_revmap(mpic->irqhost, src); |
| #else |
| return NO_IRQ; |
| #endif |
| } |
| |
| unsigned int mpic_get_mcirq(void) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| BUG_ON(mpic == NULL); |
| |
| return _mpic_get_one_irq(mpic, MPIC_INFO(CPU_MCACK)); |
| } |
| |
| #ifdef CONFIG_SMP |
| void mpic_request_ipis(void) |
| { |
| struct mpic *mpic = mpic_primary; |
| int i; |
| BUG_ON(mpic == NULL); |
| |
| printk(KERN_INFO "mpic: requesting IPIs...\n"); |
| |
| for (i = 0; i < 4; i++) { |
| unsigned int vipi = irq_create_mapping(mpic->irqhost, |
| mpic->ipi_vecs[0] + i); |
| if (vipi == NO_IRQ) { |
| printk(KERN_ERR "Failed to map %s\n", smp_ipi_name[i]); |
| continue; |
| } |
| smp_request_message_ipi(vipi, i); |
| } |
| } |
| |
| void smp_mpic_message_pass(int cpu, int msg) |
| { |
| struct mpic *mpic = mpic_primary; |
| u32 physmask; |
| |
| BUG_ON(mpic == NULL); |
| |
| /* make sure we're sending something that translates to an IPI */ |
| if ((unsigned int)msg > 3) { |
| printk("SMP %d: smp_message_pass: unknown msg %d\n", |
| smp_processor_id(), msg); |
| return; |
| } |
| |
| #ifdef DEBUG_IPI |
| DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, msg); |
| #endif |
| |
| physmask = 1 << get_hard_smp_processor_id(cpu); |
| |
| mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) + |
| msg * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE), physmask); |
| } |
| |
| int __init smp_mpic_probe(void) |
| { |
| int nr_cpus; |
| |
| DBG("smp_mpic_probe()...\n"); |
| |
| nr_cpus = cpumask_weight(cpu_possible_mask); |
| |
| DBG("nr_cpus: %d\n", nr_cpus); |
| |
| if (nr_cpus > 1) |
| mpic_request_ipis(); |
| |
| return nr_cpus; |
| } |
| |
| void __devinit smp_mpic_setup_cpu(int cpu) |
| { |
| mpic_setup_this_cpu(); |
| } |
| |
| void mpic_reset_core(int cpu) |
| { |
| struct mpic *mpic = mpic_primary; |
| u32 pir; |
| int cpuid = get_hard_smp_processor_id(cpu); |
| int i; |
| |
| /* Set target bit for core reset */ |
| pir = mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); |
| pir |= (1 << cpuid); |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir); |
| mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); |
| |
| /* Restore target bit after reset complete */ |
| pir &= ~(1 << cpuid); |
| mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir); |
| mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); |
| |
| /* Perform 15 EOI on each reset core to clear pending interrupts. |
| * This is required for FSL CoreNet based devices */ |
| if (mpic->flags & MPIC_FSL) { |
| for (i = 0; i < 15; i++) { |
| _mpic_write(mpic->reg_type, &mpic->cpuregs[cpuid], |
| MPIC_CPU_EOI, 0); |
| } |
| } |
| } |
| #endif /* CONFIG_SMP */ |
| |
| #ifdef CONFIG_PM |
| static void mpic_suspend_one(struct mpic *mpic) |
| { |
| int i; |
| |
| for (i = 0; i < mpic->num_sources; i++) { |
| mpic->save_data[i].vecprio = |
| mpic_irq_read(i, MPIC_INFO(IRQ_VECTOR_PRI)); |
| mpic->save_data[i].dest = |
| mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)); |
| } |
| } |
| |
| static int mpic_suspend(void) |
| { |
| struct mpic *mpic = mpics; |
| |
| while (mpic) { |
| mpic_suspend_one(mpic); |
| mpic = mpic->next; |
| } |
| |
| return 0; |
| } |
| |
| static void mpic_resume_one(struct mpic *mpic) |
| { |
| int i; |
| |
| for (i = 0; i < mpic->num_sources; i++) { |
| mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), |
| mpic->save_data[i].vecprio); |
| mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), |
| mpic->save_data[i].dest); |
| |
| #ifdef CONFIG_MPIC_U3_HT_IRQS |
| if (mpic->fixups) { |
| struct mpic_irq_fixup *fixup = &mpic->fixups[i]; |
| |
| if (fixup->base) { |
| /* we use the lowest bit in an inverted meaning */ |
| if ((mpic->save_data[i].fixup_data & 1) == 0) |
| continue; |
| |
| /* Enable and configure */ |
| writeb(0x10 + 2 * fixup->index, fixup->base + 2); |
| |
| writel(mpic->save_data[i].fixup_data & ~1, |
| fixup->base + 4); |
| } |
| } |
| #endif |
| } /* end for loop */ |
| } |
| |
| static void mpic_resume(void) |
| { |
| struct mpic *mpic = mpics; |
| |
| while (mpic) { |
| mpic_resume_one(mpic); |
| mpic = mpic->next; |
| } |
| } |
| |
| static struct syscore_ops mpic_syscore_ops = { |
| .resume = mpic_resume, |
| .suspend = mpic_suspend, |
| }; |
| |
| static int mpic_init_sys(void) |
| { |
| register_syscore_ops(&mpic_syscore_ops); |
| return 0; |
| } |
| |
| device_initcall(mpic_init_sys); |
| #endif |