| # Helper to resolve issues with configs that have SPI enabled but I2C |
| # modular, meaning we can't build the codec driver in with I2C support. |
| # We use an ordered list of conditional defaults to pick the appropriate |
| # setting - SPI can't be modular so that case doesn't need to be covered. |
| config SND_SOC_I2C_AND_SPI |
| tristate |
| default m if I2C=m |
| default y if I2C=y |
| default y if SPI_MASTER=y |
| |
| config SND_SOC_ALL_CODECS |
| tristate "Build all ASoC CODEC drivers" |
| select SND_SOC_88PM860X if MFD_88PM860X |
| select SND_SOC_L3 |
| select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS |
| select SND_SOC_AD1836 if SPI_MASTER |
| select SND_SOC_AD193X if SND_SOC_I2C_AND_SPI |
| select SND_SOC_AD1980 if SND_SOC_AC97_BUS |
| select SND_SOC_ADS117X |
| select SND_SOC_AD73311 if I2C |
| select SND_SOC_AK4104 if SPI_MASTER |
| select SND_SOC_AK4535 if I2C |
| select SND_SOC_AK4642 if I2C |
| select SND_SOC_AK4671 if I2C |
| select SND_SOC_ALC5623 if I2C |
| select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC |
| select SND_SOC_CS42L51 if I2C |
| select SND_SOC_CS4270 if I2C |
| select SND_SOC_CX20442 |
| select SND_SOC_DA7210 if I2C |
| select SND_SOC_JZ4740_CODEC if SOC_JZ4740 |
| select SND_SOC_MAX98088 if I2C |
| select SND_SOC_MAX9877 if I2C |
| select SND_SOC_PCM3008 |
| select SND_SOC_SPDIF |
| select SND_SOC_SSM2602 if I2C |
| select SND_SOC_STAC9766 if SND_SOC_AC97_BUS |
| select SND_SOC_TLV320AIC23 if I2C |
| select SND_SOC_TLV320AIC26 if SPI_MASTER |
| select SND_SOC_TLV320AIC3X if I2C |
| select SND_SOC_TPA6130A2 if I2C |
| select SND_SOC_TLV320DAC33 if I2C |
| select SND_SOC_TWL4030 if TWL4030_CORE |
| select SND_SOC_TWL6040 if TWL4030_CORE |
| select SND_SOC_UDA134X |
| select SND_SOC_UDA1380 if I2C |
| select SND_SOC_WL1273 if WL1273_CORE |
| select SND_SOC_WM2000 if I2C |
| select SND_SOC_WM8350 if MFD_WM8350 |
| select SND_SOC_WM8400 if MFD_WM8400 |
| select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8523 if I2C |
| select SND_SOC_WM8580 if I2C |
| select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8727 |
| select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8737 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8770 if SPI_MASTER |
| select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8900 if I2C |
| select SND_SOC_WM8903 if I2C |
| select SND_SOC_WM8904 if I2C |
| select SND_SOC_WM8940 if I2C |
| select SND_SOC_WM8955 if I2C |
| select SND_SOC_WM8960 if I2C |
| select SND_SOC_WM8961 if I2C |
| select SND_SOC_WM8962 if I2C |
| select SND_SOC_WM8971 if I2C |
| select SND_SOC_WM8974 if I2C |
| select SND_SOC_WM8978 if I2C |
| select SND_SOC_WM8985 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM8990 if I2C |
| select SND_SOC_WM8993 if I2C |
| select SND_SOC_WM8994 if MFD_WM8994 |
| select SND_SOC_WM8995 if SND_SOC_I2C_AND_SPI |
| select SND_SOC_WM9081 if I2C |
| select SND_SOC_WM9090 if I2C |
| select SND_SOC_WM9705 if SND_SOC_AC97_BUS |
| select SND_SOC_WM9712 if SND_SOC_AC97_BUS |
| select SND_SOC_WM9713 if SND_SOC_AC97_BUS |
| help |
| Normally ASoC codec drivers are only built if a machine driver which |
| uses them is also built since they are only usable with a machine |
| driver. Selecting this option will allow these drivers to be built |
| without an explicit machine driver for test and development purposes. |
| |
| Support for the bus types used to access the codecs to be built must |
| be selected separately. |
| |
| If unsure select "N". |
| |
| config SND_SOC_88PM860X |
| tristate |
| |
| config SND_SOC_WM_HUBS |
| tristate |
| default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y |
| default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m |
| |
| config SND_SOC_AC97_CODEC |
| tristate |
| select SND_AC97_CODEC |
| |
| config SND_SOC_AD1836 |
| tristate |
| |
| config SND_SOC_AD193X |
| tristate |
| |
| config SND_SOC_AD1980 |
| tristate |
| |
| config SND_SOC_AD73311 |
| tristate |
| |
| config SND_SOC_ADS117X |
| tristate |
| |
| config SND_SOC_AK4104 |
| tristate |
| |
| config SND_SOC_AK4535 |
| tristate |
| |
| config SND_SOC_AK4642 |
| tristate |
| |
| config SND_SOC_AK4671 |
| tristate |
| |
| config SND_SOC_ALC5623 |
| tristate |
| |
| config SND_SOC_CQ0093VC |
| tristate |
| |
| config SND_SOC_CS42L51 |
| tristate |
| |
| # Cirrus Logic CS4270 Codec |
| config SND_SOC_CS4270 |
| tristate |
| |
| # Cirrus Logic CS4270 Codec VD = 3.3V Errata |
| # Select if you are affected by the errata where the part will not function |
| # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will |
| # not select any sample rates that require MCLK to be divided by 1.5. |
| config SND_SOC_CS4270_VD33_ERRATA |
| bool |
| depends on SND_SOC_CS4270 |
| |
| config SND_SOC_CX20442 |
| tristate |
| |
| config SND_SOC_JZ4740_CODEC |
| tristate |
| |
| config SND_SOC_L3 |
| tristate |
| |
| config SND_SOC_DA7210 |
| tristate |
| |
| config SND_SOC_DMIC |
| tristate |
| |
| config SND_SOC_MAX98088 |
| tristate |
| |
| config SND_SOC_PCM3008 |
| tristate |
| |
| config SND_SOC_SPDIF |
| tristate |
| |
| config SND_SOC_SSM2602 |
| tristate |
| |
| config SND_SOC_STAC9766 |
| tristate |
| |
| config SND_SOC_TLV320AIC23 |
| tristate |
| |
| config SND_SOC_TLV320AIC26 |
| tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE |
| depends on SPI |
| |
| config SND_SOC_TLV320AIC3X |
| tristate |
| |
| config SND_SOC_TLV320DAC33 |
| tristate |
| |
| config SND_SOC_TWL4030 |
| select TWL4030_CODEC |
| tristate |
| |
| config SND_SOC_TWL6040 |
| tristate |
| |
| config SND_SOC_UDA134X |
| tristate |
| |
| config SND_SOC_UDA1380 |
| tristate |
| |
| config SND_SOC_WL1273 |
| tristate |
| |
| config SND_SOC_WM8350 |
| tristate |
| |
| config SND_SOC_WM8400 |
| tristate |
| |
| config SND_SOC_WM8510 |
| tristate |
| |
| config SND_SOC_WM8523 |
| tristate |
| |
| config SND_SOC_WM8580 |
| tristate |
| |
| config SND_SOC_WM8711 |
| tristate |
| |
| config SND_SOC_WM8727 |
| tristate |
| |
| config SND_SOC_WM8728 |
| tristate |
| |
| config SND_SOC_WM8731 |
| tristate |
| |
| config SND_SOC_WM8737 |
| tristate |
| |
| config SND_SOC_WM8741 |
| tristate |
| |
| config SND_SOC_WM8750 |
| tristate |
| |
| config SND_SOC_WM8753 |
| tristate |
| |
| config SND_SOC_WM8770 |
| tristate |
| |
| config SND_SOC_WM8776 |
| tristate |
| |
| config SND_SOC_WM8804 |
| tristate |
| |
| config SND_SOC_WM8900 |
| tristate |
| |
| config SND_SOC_WM8903 |
| tristate |
| |
| config SND_SOC_WM8904 |
| tristate |
| |
| config SND_SOC_WM8940 |
| tristate |
| |
| config SND_SOC_WM8955 |
| tristate |
| |
| config SND_SOC_WM8960 |
| tristate |
| |
| config SND_SOC_WM8961 |
| tristate |
| |
| config SND_SOC_WM8962 |
| tristate |
| |
| config SND_SOC_WM8971 |
| tristate |
| |
| config SND_SOC_WM8974 |
| tristate |
| |
| config SND_SOC_WM8978 |
| tristate |
| |
| config SND_SOC_WM8985 |
| tristate |
| |
| config SND_SOC_WM8988 |
| tristate |
| |
| config SND_SOC_WM8990 |
| tristate |
| |
| config SND_SOC_WM8993 |
| tristate |
| |
| config SND_SOC_WM8994 |
| tristate |
| |
| config SND_SOC_WM8995 |
| tristate |
| |
| config SND_SOC_WM9081 |
| tristate |
| |
| config SND_SOC_WM9705 |
| tristate |
| |
| config SND_SOC_WM9712 |
| tristate |
| |
| config SND_SOC_WM9713 |
| tristate |
| |
| # Amp |
| config SND_SOC_MAX9877 |
| tristate |
| |
| config SND_SOC_TPA6130A2 |
| tristate |
| |
| config SND_SOC_WM2000 |
| tristate |
| |
| config SND_SOC_WM9090 |
| tristate |
| |