ARM: at91: cpuidle: Convert to platform driver
Using the platform driver model is a good way to separate the cpuidle specific
code from the low level pm code. It allows to remove the dependency between
these two components.
The platform_device is located in the pm code and a 'set' function has been
added to set the standby function from the AT91_SOC_START initialization
function. Each SoC with a cpuidle driver will set the standby function in the
platform_data field at init time. Then pm code will register the cpuidle
platform device.
The cpuidle driver will register the platform_driver and use the device's
platform_data as a standby callback in the idle path.
The at91_pm_enter function contains a { if then else } based on cpu_is_xx
similar to what was in cpuidle. This is considered dangerous when adding a new
SoC. Like the cpuidle driver, a standby ops is defined and assigned when the
SoC init function specifies what is its standby function and reused in the
at91_pm_enter's 'case' block.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 4aad93d..0d234f2 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -27,6 +27,7 @@
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
+#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
@@ -337,6 +338,8 @@
/* Initialize GPIO subsystem */
at91_gpio_init(at91rm9200_gpio,
cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
+
+ at91_pm_set_standby(at91rm9200_standby);
}
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 5de6074..ffe9ce70 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -28,6 +28,7 @@
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
+#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
@@ -351,6 +352,8 @@
/* Register GPIO subsystem */
at91_gpio_init(at91sam9260_gpio, 3);
+
+ at91_pm_set_standby(at91sam9_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 0e07932..1edbb6f 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -27,6 +27,7 @@
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
+#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
@@ -293,6 +294,8 @@
/* Register GPIO subsystem */
at91_gpio_init(at91sam9261_gpio, 3);
+
+ at91_pm_set_sandby(at91sam9_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6ce7d18..8c81c89 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -26,6 +26,7 @@
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
+#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
@@ -330,6 +331,8 @@
/* Register GPIO subsystem */
at91_gpio_init(at91sam9263_gpio, 5);
+
+ at91_pm_set_standby(at91sam9263_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 474ee04..8460f52 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -26,6 +26,7 @@
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
+#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
@@ -379,6 +380,8 @@
/* Register GPIO subsystem */
at91_gpio_init(at91sam9g45_gpio, 5);
+
+ at91_pm_set_standby(at91sam9g45_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d4ec0d9..c7986e4 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -27,6 +27,7 @@
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
+#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
@@ -296,6 +297,8 @@
/* Register GPIO subsystem */
at91_gpio_init(at91sam9rl_gpio, 4);
+
+ at91_pm_set_standby(at91sam9_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 4ec6a6d..a077437 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -21,26 +21,17 @@
#include <linux/export.h>
#include <asm/proc-fns.h>
#include <asm/cpuidle.h>
-#include <mach/cpu.h>
-
-#include "pm.h"
#define AT91_MAX_STATES 2
+static void (*at91_standby)(void);
+
/* Actual code that puts the SoC in different idle states */
static int at91_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
- if (cpu_is_at91rm9200())
- at91rm9200_standby();
- else if (cpu_is_at91sam9g45())
- at91sam9g45_standby();
- else if (cpu_is_at91sam9263())
- at91sam9263_standby();
- else
- at91sam9_standby();
-
+ at91_standby();
return index;
}
@@ -60,9 +51,19 @@
};
/* Initialize CPU idle by registering the idle states */
-static int __init at91_init_cpuidle(void)
+static int at91_cpuidle_probe(struct platform_device *dev)
{
+ at91_standby = (void *)(dev->dev.platform_data);
+
return cpuidle_register(&at91_idle_driver, NULL);
}
-device_initcall(at91_init_cpuidle);
+static struct platform_driver at91_cpuidle_driver = {
+ .driver = {
+ .name = "cpuidle-at91",
+ .owner = THIS_MODULE,
+ },
+ .probe = at91_cpuidle_probe,
+};
+
+module_platform_driver(at91_cpuidle_driver);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 15afb5d..9986542 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -39,6 +39,8 @@
#include "at91_rstc.h"
#include "at91_shdwc.h"
+static void (*at91_pm_standby)(void);
+
static void __init show_reset_status(void)
{
static char reset[] __initdata = "reset";
@@ -266,14 +268,8 @@
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
- if (cpu_is_at91rm9200())
- at91rm9200_standby();
- else if (cpu_is_at91sam9g45())
- at91sam9g45_standby();
- else if (cpu_is_at91sam9263())
- at91sam9263_standby();
- else
- at91sam9_standby();
+ if (at91_pm_standby)
+ at91_pm_standby();
break;
case PM_SUSPEND_ON:
@@ -314,6 +310,18 @@
.end = at91_pm_end,
};
+static struct platform_device at91_cpuidle_device = {
+ .name = "cpuidle-at91",
+};
+
+void at91_pm_set_standby(void (*at91_standby)(void))
+{
+ if (at91_standby) {
+ at91_cpuidle_device.dev.platform_data = at91_standby;
+ at91_pm_standby = at91_standby;
+ }
+}
+
static int __init at91_pm_init(void)
{
#ifdef CONFIG_AT91_SLOW_CLOCK
@@ -325,6 +333,9 @@
/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
if (cpu_is_at91rm9200())
at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+
+ if (at91_cpuidle_device.dev.platform_data)
+ platform_device_register(&at91_cpuidle_device);
suspend_set_ops(&at91_pm_ops);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 2f5908f..76dd1a7 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -11,9 +11,13 @@
#ifndef __ARCH_ARM_MACH_AT91_PM
#define __ARCH_ARM_MACH_AT91_PM
+#include <asm/proc-fns.h>
+
#include <mach/at91_ramc.h>
#include <mach/at91rm9200_sdramc.h>
+extern void at91_pm_set_standby(void (*at91_standby)(void));
+
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
* terminate self-refresh automatically on the next SDRAM access.