| #ifndef __x8664_PCI_H |
| #define __x8664_PCI_H |
| |
| #include <asm/io.h> |
| |
| #ifdef __KERNEL__ |
| |
| struct pci_sysdata { |
| int node; /* NUMA node */ |
| void* iommu; /* IOMMU private data */ |
| }; |
| |
| extern struct pci_bus *pci_scan_bus_with_sysdata(int busno); |
| |
| #ifdef CONFIG_CALGARY_IOMMU |
| static inline void* pci_iommu(struct pci_bus *bus) |
| { |
| struct pci_sysdata *sd = bus->sysdata; |
| return sd->iommu; |
| } |
| |
| static inline void set_pci_iommu(struct pci_bus *bus, void *val) |
| { |
| struct pci_sysdata *sd = bus->sysdata; |
| sd->iommu = val; |
| } |
| #endif /* CONFIG_CALGARY_IOMMU */ |
| |
| #include <linux/mm.h> /* for struct page */ |
| |
| /* Can be used to override the logic in pci_scan_bus for skipping |
| already-configured bus numbers - to be used for buggy BIOSes |
| or architectures with incomplete PCI setup by the loader */ |
| |
| #ifdef CONFIG_PCI |
| extern unsigned int pcibios_assign_all_busses(void); |
| #else |
| #define pcibios_assign_all_busses() 0 |
| #endif |
| #define pcibios_scan_all_fns(a, b) 0 |
| |
| extern unsigned long pci_mem_start; |
| #define PCIBIOS_MIN_IO 0x1000 |
| #define PCIBIOS_MIN_MEM (pci_mem_start) |
| |
| #define PCIBIOS_MIN_CARDBUS_IO 0x4000 |
| |
| void pcibios_config_init(void); |
| struct pci_bus * pcibios_scan_root(int bus); |
| extern int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value); |
| extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value); |
| |
| void pcibios_set_master(struct pci_dev *dev); |
| void pcibios_penalize_isa_irq(int irq, int active); |
| struct irq_routing_table *pcibios_get_irq_routing_table(void); |
| int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq); |
| |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <asm/scatterlist.h> |
| #include <linux/string.h> |
| #include <asm/page.h> |
| |
| extern void pci_iommu_alloc(void); |
| extern int iommu_setup(char *opt); |
| |
| /* The PCI address space does equal the physical memory |
| * address space. The networking and block device layers use |
| * this boolean for bounce buffer decisions |
| * |
| * On AMD64 it mostly equals, but we set it to zero if a hardware |
| * IOMMU (gart) of sotware IOMMU (swiotlb) is available. |
| */ |
| #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) |
| |
| #if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU) |
| |
| #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ |
| dma_addr_t ADDR_NAME; |
| #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ |
| __u32 LEN_NAME; |
| #define pci_unmap_addr(PTR, ADDR_NAME) \ |
| ((PTR)->ADDR_NAME) |
| #define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ |
| (((PTR)->ADDR_NAME) = (VAL)) |
| #define pci_unmap_len(PTR, LEN_NAME) \ |
| ((PTR)->LEN_NAME) |
| #define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ |
| (((PTR)->LEN_NAME) = (VAL)) |
| |
| #else |
| /* No IOMMU */ |
| |
| #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) |
| #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) |
| #define pci_unmap_addr(PTR, ADDR_NAME) (0) |
| #define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) |
| #define pci_unmap_len(PTR, LEN_NAME) (0) |
| #define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) |
| |
| #endif |
| |
| #include <asm-generic/pci-dma-compat.h> |
| |
| #ifdef CONFIG_PCI |
| static inline void pci_dma_burst_advice(struct pci_dev *pdev, |
| enum pci_dma_burst_strategy *strat, |
| unsigned long *strategy_parameter) |
| { |
| *strat = PCI_DMA_BURST_INFINITY; |
| *strategy_parameter = ~0UL; |
| } |
| #endif |
| |
| #define HAVE_PCI_MMAP |
| extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state, int write_combine); |
| |
| #endif /* __KERNEL__ */ |
| |
| /* generic pci stuff */ |
| #ifdef CONFIG_PCI |
| #include <asm-generic/pci.h> |
| #endif |
| |
| #endif /* __x8664_PCI_H */ |