| /* |
| * linux/drivers/video/mdacon.c -- Low level MDA based console driver |
| * |
| * (c) 1998 Andrew Apted <ajapted@netspace.net.au> |
| * |
| * including portions (c) 1995-1998 Patrick Caulfield. |
| * |
| * slight improvements (c) 2000 Edward Betts <edward@debian.org> |
| * |
| * This file is based on the VGA console driver (vgacon.c): |
| * |
| * Created 28 Sep 1997 by Geert Uytterhoeven |
| * |
| * Rewritten by Martin Mares <mj@ucw.cz>, July 1998 |
| * |
| * and on the old console.c, vga.c and vesa_blank.c drivers: |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * 1995 Jay Estabrook |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| * |
| * Changelog: |
| * Paul G. (03/2001) Fix mdacon= boot prompt to use __setup(). |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/fs.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/console.h> |
| #include <linux/string.h> |
| #include <linux/kd.h> |
| #include <linux/vt_kern.h> |
| #include <linux/vt_buffer.h> |
| #include <linux/selection.h> |
| #include <linux/spinlock.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| |
| #include <asm/io.h> |
| #include <asm/vga.h> |
| |
| static DEFINE_SPINLOCK(mda_lock); |
| |
| /* description of the hardware layout */ |
| |
| static unsigned long mda_vram_base; /* Base of video memory */ |
| static unsigned long mda_vram_len; /* Size of video memory */ |
| static unsigned int mda_num_columns; /* Number of text columns */ |
| static unsigned int mda_num_lines; /* Number of text lines */ |
| |
| static unsigned int mda_index_port; /* Register select port */ |
| static unsigned int mda_value_port; /* Register value port */ |
| static unsigned int mda_mode_port; /* Mode control port */ |
| static unsigned int mda_status_port; /* Status and Config port */ |
| static unsigned int mda_gfx_port; /* Graphics control port */ |
| |
| /* current hardware state */ |
| |
| static int mda_cursor_loc=-1; |
| static int mda_cursor_size_from=-1; |
| static int mda_cursor_size_to=-1; |
| |
| static enum { TYPE_MDA, TYPE_HERC, TYPE_HERCPLUS, TYPE_HERCCOLOR } mda_type; |
| static char *mda_type_name; |
| |
| /* console information */ |
| |
| static int mda_first_vc = 13; |
| static int mda_last_vc = 16; |
| |
| static struct vc_data *mda_display_fg = NULL; |
| |
| module_param(mda_first_vc, int, 0); |
| MODULE_PARM_DESC(mda_first_vc, "First virtual console. Default: 13"); |
| module_param(mda_last_vc, int, 0); |
| MODULE_PARM_DESC(mda_last_vc, "Last virtual console. Default: 16"); |
| |
| /* MDA register values |
| */ |
| |
| #define MDA_CURSOR_BLINKING 0x00 |
| #define MDA_CURSOR_OFF 0x20 |
| #define MDA_CURSOR_SLOWBLINK 0x60 |
| |
| #define MDA_MODE_GRAPHICS 0x02 |
| #define MDA_MODE_VIDEO_EN 0x08 |
| #define MDA_MODE_BLINK_EN 0x20 |
| #define MDA_MODE_GFX_PAGE1 0x80 |
| |
| #define MDA_STATUS_HSYNC 0x01 |
| #define MDA_STATUS_VSYNC 0x80 |
| #define MDA_STATUS_VIDEO 0x08 |
| |
| #define MDA_CONFIG_COL132 0x08 |
| #define MDA_GFX_MODE_EN 0x01 |
| #define MDA_GFX_PAGE_EN 0x02 |
| |
| |
| /* |
| * MDA could easily be classified as "pre-dinosaur hardware". |
| */ |
| |
| static void write_mda_b(unsigned int val, unsigned char reg) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&mda_lock, flags); |
| |
| outb_p(reg, mda_index_port); |
| outb_p(val, mda_value_port); |
| |
| spin_unlock_irqrestore(&mda_lock, flags); |
| } |
| |
| static void write_mda_w(unsigned int val, unsigned char reg) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&mda_lock, flags); |
| |
| outb_p(reg, mda_index_port); outb_p(val >> 8, mda_value_port); |
| outb_p(reg+1, mda_index_port); outb_p(val & 0xff, mda_value_port); |
| |
| spin_unlock_irqrestore(&mda_lock, flags); |
| } |
| |
| #ifdef TEST_MDA_B |
| static int test_mda_b(unsigned char val, unsigned char reg) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&mda_lock, flags); |
| |
| outb_p(reg, mda_index_port); |
| outb (val, mda_value_port); |
| |
| udelay(20); val = (inb_p(mda_value_port) == val); |
| |
| spin_unlock_irqrestore(&mda_lock, flags); |
| return val; |
| } |
| #endif |
| |
| static inline void mda_set_cursor(unsigned int location) |
| { |
| if (mda_cursor_loc == location) |
| return; |
| |
| write_mda_w(location >> 1, 0x0e); |
| |
| mda_cursor_loc = location; |
| } |
| |
| static inline void mda_set_cursor_size(int from, int to) |
| { |
| if (mda_cursor_size_from==from && mda_cursor_size_to==to) |
| return; |
| |
| if (from > to) { |
| write_mda_b(MDA_CURSOR_OFF, 0x0a); /* disable cursor */ |
| } else { |
| write_mda_b(from, 0x0a); /* cursor start */ |
| write_mda_b(to, 0x0b); /* cursor end */ |
| } |
| |
| mda_cursor_size_from = from; |
| mda_cursor_size_to = to; |
| } |
| |
| |
| #ifndef MODULE |
| static int __init mdacon_setup(char *str) |
| { |
| /* command line format: mdacon=<first>,<last> */ |
| |
| int ints[3]; |
| |
| str = get_options(str, ARRAY_SIZE(ints), ints); |
| |
| if (ints[0] < 2) |
| return 0; |
| |
| if (ints[1] < 1 || ints[1] > MAX_NR_CONSOLES || |
| ints[2] < 1 || ints[2] > MAX_NR_CONSOLES) |
| return 0; |
| |
| mda_first_vc = ints[1]; |
| mda_last_vc = ints[2]; |
| return 1; |
| } |
| |
| __setup("mdacon=", mdacon_setup); |
| #endif |
| |
| static int mda_detect(void) |
| { |
| int count=0; |
| u16 *p, p_save; |
| u16 *q, q_save; |
| |
| /* do a memory check */ |
| |
| p = (u16 *) mda_vram_base; |
| q = (u16 *) (mda_vram_base + 0x01000); |
| |
| p_save = scr_readw(p); q_save = scr_readw(q); |
| |
| scr_writew(0xAA55, p); if (scr_readw(p) == 0xAA55) count++; |
| scr_writew(0x55AA, p); if (scr_readw(p) == 0x55AA) count++; |
| scr_writew(p_save, p); |
| |
| if (count != 2) { |
| return 0; |
| } |
| |
| /* check if we have 4K or 8K */ |
| |
| scr_writew(0xA55A, q); scr_writew(0x0000, p); |
| if (scr_readw(q) == 0xA55A) count++; |
| |
| scr_writew(0x5AA5, q); scr_writew(0x0000, p); |
| if (scr_readw(q) == 0x5AA5) count++; |
| |
| scr_writew(p_save, p); scr_writew(q_save, q); |
| |
| if (count == 4) { |
| mda_vram_len = 0x02000; |
| } |
| |
| /* Ok, there is definitely a card registering at the correct |
| * memory location, so now we do an I/O port test. |
| */ |
| |
| #ifdef TEST_MDA_B |
| /* Edward: These two mess `tests' mess up my cursor on bootup */ |
| |
| /* cursor low register */ |
| if (! test_mda_b(0x66, 0x0f)) { |
| return 0; |
| } |
| |
| /* cursor low register */ |
| if (! test_mda_b(0x99, 0x0f)) { |
| return 0; |
| } |
| #endif |
| |
| /* See if the card is a Hercules, by checking whether the vsync |
| * bit of the status register is changing. This test lasts for |
| * approximately 1/10th of a second. |
| */ |
| |
| p_save = q_save = inb_p(mda_status_port) & MDA_STATUS_VSYNC; |
| |
| for (count=0; count < 50000 && p_save == q_save; count++) { |
| q_save = inb(mda_status_port) & MDA_STATUS_VSYNC; |
| udelay(2); |
| } |
| |
| if (p_save != q_save) { |
| switch (inb_p(mda_status_port) & 0x70) { |
| case 0x10: |
| mda_type = TYPE_HERCPLUS; |
| mda_type_name = "HerculesPlus"; |
| break; |
| case 0x50: |
| mda_type = TYPE_HERCCOLOR; |
| mda_type_name = "HerculesColor"; |
| break; |
| default: |
| mda_type = TYPE_HERC; |
| mda_type_name = "Hercules"; |
| break; |
| } |
| } |
| |
| return 1; |
| } |
| |
| static void mda_initialize(void) |
| { |
| write_mda_b(97, 0x00); /* horizontal total */ |
| write_mda_b(80, 0x01); /* horizontal displayed */ |
| write_mda_b(82, 0x02); /* horizontal sync pos */ |
| write_mda_b(15, 0x03); /* horizontal sync width */ |
| |
| write_mda_b(25, 0x04); /* vertical total */ |
| write_mda_b(6, 0x05); /* vertical total adjust */ |
| write_mda_b(25, 0x06); /* vertical displayed */ |
| write_mda_b(25, 0x07); /* vertical sync pos */ |
| |
| write_mda_b(2, 0x08); /* interlace mode */ |
| write_mda_b(13, 0x09); /* maximum scanline */ |
| write_mda_b(12, 0x0a); /* cursor start */ |
| write_mda_b(13, 0x0b); /* cursor end */ |
| |
| write_mda_w(0x0000, 0x0c); /* start address */ |
| write_mda_w(0x0000, 0x0e); /* cursor location */ |
| |
| outb_p(MDA_MODE_VIDEO_EN | MDA_MODE_BLINK_EN, mda_mode_port); |
| outb_p(0x00, mda_status_port); |
| outb_p(0x00, mda_gfx_port); |
| } |
| |
| static const char *mdacon_startup(void) |
| { |
| mda_num_columns = 80; |
| mda_num_lines = 25; |
| |
| mda_vram_len = 0x01000; |
| mda_vram_base = VGA_MAP_MEM(0xb0000, mda_vram_len); |
| |
| mda_index_port = 0x3b4; |
| mda_value_port = 0x3b5; |
| mda_mode_port = 0x3b8; |
| mda_status_port = 0x3ba; |
| mda_gfx_port = 0x3bf; |
| |
| mda_type = TYPE_MDA; |
| mda_type_name = "MDA"; |
| |
| if (! mda_detect()) { |
| printk("mdacon: MDA card not detected.\n"); |
| return NULL; |
| } |
| |
| if (mda_type != TYPE_MDA) { |
| mda_initialize(); |
| } |
| |
| /* cursor looks ugly during boot-up, so turn it off */ |
| mda_set_cursor(mda_vram_len - 1); |
| |
| printk("mdacon: %s with %ldK of memory detected.\n", |
| mda_type_name, mda_vram_len/1024); |
| |
| return "MDA-2"; |
| } |
| |
| static void mdacon_init(struct vc_data *c, int init) |
| { |
| c->vc_complement_mask = 0x0800; /* reverse video */ |
| c->vc_display_fg = &mda_display_fg; |
| |
| if (init) { |
| c->vc_cols = mda_num_columns; |
| c->vc_rows = mda_num_lines; |
| } else |
| vc_resize(c, mda_num_columns, mda_num_lines); |
| |
| /* make the first MDA console visible */ |
| |
| if (mda_display_fg == NULL) |
| mda_display_fg = c; |
| } |
| |
| static void mdacon_deinit(struct vc_data *c) |
| { |
| /* con_set_default_unimap(c->vc_num); */ |
| |
| if (mda_display_fg == c) |
| mda_display_fg = NULL; |
| } |
| |
| static inline u16 mda_convert_attr(u16 ch) |
| { |
| u16 attr = 0x0700; |
| |
| /* Underline and reverse-video are mutually exclusive on MDA. |
| * Since reverse-video is used for cursors and selected areas, |
| * it takes precedence. |
| */ |
| |
| if (ch & 0x0800) attr = 0x7000; /* reverse */ |
| else if (ch & 0x0400) attr = 0x0100; /* underline */ |
| |
| return ((ch & 0x0200) << 2) | /* intensity */ |
| (ch & 0x8000) | /* blink */ |
| (ch & 0x00ff) | attr; |
| } |
| |
| static u8 mdacon_build_attr(struct vc_data *c, u8 color, u8 intensity, |
| u8 blink, u8 underline, u8 reverse, u8 italic) |
| { |
| /* The attribute is just a bit vector: |
| * |
| * Bit 0..1 : intensity (0..2) |
| * Bit 2 : underline |
| * Bit 3 : reverse |
| * Bit 7 : blink |
| */ |
| |
| return (intensity & 3) | |
| ((underline & 1) << 2) | |
| ((reverse & 1) << 3) | |
| (!!italic << 4) | |
| ((blink & 1) << 7); |
| } |
| |
| static void mdacon_invert_region(struct vc_data *c, u16 *p, int count) |
| { |
| for (; count > 0; count--) { |
| scr_writew(scr_readw(p) ^ 0x0800, p); |
| p++; |
| } |
| } |
| |
| #define MDA_ADDR(x,y) ((u16 *) mda_vram_base + (y)*mda_num_columns + (x)) |
| |
| static void mdacon_putc(struct vc_data *c, int ch, int y, int x) |
| { |
| scr_writew(mda_convert_attr(ch), MDA_ADDR(x, y)); |
| } |
| |
| static void mdacon_putcs(struct vc_data *c, const unsigned short *s, |
| int count, int y, int x) |
| { |
| u16 *dest = MDA_ADDR(x, y); |
| |
| for (; count > 0; count--) { |
| scr_writew(mda_convert_attr(scr_readw(s++)), dest++); |
| } |
| } |
| |
| static void mdacon_clear(struct vc_data *c, int y, int x, |
| int height, int width) |
| { |
| u16 *dest = MDA_ADDR(x, y); |
| u16 eattr = mda_convert_attr(c->vc_video_erase_char); |
| |
| if (width <= 0 || height <= 0) |
| return; |
| |
| if (x==0 && width==mda_num_columns) { |
| scr_memsetw(dest, eattr, height*width*2); |
| } else { |
| for (; height > 0; height--, dest+=mda_num_columns) |
| scr_memsetw(dest, eattr, width*2); |
| } |
| } |
| |
| static int mdacon_switch(struct vc_data *c) |
| { |
| return 1; /* redrawing needed */ |
| } |
| |
| static int mdacon_blank(struct vc_data *c, int blank, int mode_switch) |
| { |
| if (mda_type == TYPE_MDA) { |
| if (blank) |
| scr_memsetw((void *)mda_vram_base, |
| mda_convert_attr(c->vc_video_erase_char), |
| c->vc_screenbuf_size); |
| /* Tell console.c that it has to restore the screen itself */ |
| return 1; |
| } else { |
| if (blank) |
| outb_p(0x00, mda_mode_port); /* disable video */ |
| else |
| outb_p(MDA_MODE_VIDEO_EN | MDA_MODE_BLINK_EN, |
| mda_mode_port); |
| return 0; |
| } |
| } |
| |
| static void mdacon_cursor(struct vc_data *c, int mode) |
| { |
| if (mode == CM_ERASE) { |
| mda_set_cursor(mda_vram_len - 1); |
| return; |
| } |
| |
| mda_set_cursor(c->vc_y*mda_num_columns*2 + c->vc_x*2); |
| |
| switch (c->vc_cursor_type & 0x0f) { |
| |
| case CUR_LOWER_THIRD: mda_set_cursor_size(10, 13); break; |
| case CUR_LOWER_HALF: mda_set_cursor_size(7, 13); break; |
| case CUR_TWO_THIRDS: mda_set_cursor_size(4, 13); break; |
| case CUR_BLOCK: mda_set_cursor_size(1, 13); break; |
| case CUR_NONE: mda_set_cursor_size(14, 13); break; |
| default: mda_set_cursor_size(12, 13); break; |
| } |
| } |
| |
| static bool mdacon_scroll(struct vc_data *c, unsigned int t, unsigned int b, |
| enum con_scroll dir, unsigned int lines) |
| { |
| u16 eattr = mda_convert_attr(c->vc_video_erase_char); |
| |
| if (!lines) |
| return false; |
| |
| if (lines > c->vc_rows) /* maximum realistic size */ |
| lines = c->vc_rows; |
| |
| switch (dir) { |
| |
| case SM_UP: |
| scr_memmovew(MDA_ADDR(0,t), MDA_ADDR(0,t+lines), |
| (b-t-lines)*mda_num_columns*2); |
| scr_memsetw(MDA_ADDR(0,b-lines), eattr, |
| lines*mda_num_columns*2); |
| break; |
| |
| case SM_DOWN: |
| scr_memmovew(MDA_ADDR(0,t+lines), MDA_ADDR(0,t), |
| (b-t-lines)*mda_num_columns*2); |
| scr_memsetw(MDA_ADDR(0,t), eattr, lines*mda_num_columns*2); |
| break; |
| } |
| |
| return false; |
| } |
| |
| |
| /* |
| * The console `switch' structure for the MDA based console |
| */ |
| |
| static const struct consw mda_con = { |
| .owner = THIS_MODULE, |
| .con_startup = mdacon_startup, |
| .con_init = mdacon_init, |
| .con_deinit = mdacon_deinit, |
| .con_clear = mdacon_clear, |
| .con_putc = mdacon_putc, |
| .con_putcs = mdacon_putcs, |
| .con_cursor = mdacon_cursor, |
| .con_scroll = mdacon_scroll, |
| .con_switch = mdacon_switch, |
| .con_blank = mdacon_blank, |
| .con_build_attr = mdacon_build_attr, |
| .con_invert_region = mdacon_invert_region, |
| }; |
| |
| int __init mda_console_init(void) |
| { |
| int err; |
| |
| if (mda_first_vc > mda_last_vc) |
| return 1; |
| console_lock(); |
| err = do_take_over_console(&mda_con, mda_first_vc-1, mda_last_vc-1, 0); |
| console_unlock(); |
| return err; |
| } |
| |
| static void __exit mda_console_exit(void) |
| { |
| give_up_console(&mda_con); |
| } |
| |
| module_init(mda_console_init); |
| module_exit(mda_console_exit); |
| |
| MODULE_LICENSE("GPL"); |
| |