| /* |
| * Copyright 2012 DENX Software Engineering GmbH |
| * Heiko Schocher <hs@denx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #include "skeleton.dtsi" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| arm { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| intc: interrupt-controller@fffee000 { |
| compatible = "ti,cp-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| ti,intc-size = <101>; |
| reg = <0xfffee000 0x2000>; |
| }; |
| }; |
| soc@1c00000 { |
| compatible = "simple-bus"; |
| model = "da850"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x01c00000 0x400000>; |
| interrupt-parent = <&intc>; |
| |
| pmx_core: pinmux@14120 { |
| compatible = "pinctrl-single"; |
| reg = <0x14120 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #pinctrl-cells = <2>; |
| pinctrl-single,bit-per-mux; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xf>; |
| status = "disabled"; |
| |
| serial0_rtscts_pins: pinmux_serial0_rtscts_pins { |
| pinctrl-single,bits = < |
| /* UART0_RTS UART0_CTS */ |
| 0x0c 0x22000000 0xff000000 |
| >; |
| }; |
| serial0_rxtx_pins: pinmux_serial0_rxtx_pins { |
| pinctrl-single,bits = < |
| /* UART0_TXD UART0_RXD */ |
| 0x0c 0x00220000 0x00ff0000 |
| >; |
| }; |
| serial1_rtscts_pins: pinmux_serial1_rtscts_pins { |
| pinctrl-single,bits = < |
| /* UART1_CTS UART1_RTS */ |
| 0x00 0x00440000 0x00ff0000 |
| >; |
| }; |
| serial1_rxtx_pins: pinmux_serial1_rxtx_pins { |
| pinctrl-single,bits = < |
| /* UART1_TXD UART1_RXD */ |
| 0x10 0x22000000 0xff000000 |
| >; |
| }; |
| serial2_rtscts_pins: pinmux_serial2_rtscts_pins { |
| pinctrl-single,bits = < |
| /* UART2_CTS UART2_RTS */ |
| 0x00 0x44000000 0xff000000 |
| >; |
| }; |
| serial2_rxtx_pins: pinmux_serial2_rxtx_pins { |
| pinctrl-single,bits = < |
| /* UART2_TXD UART2_RXD */ |
| 0x10 0x00220000 0x00ff0000 |
| >; |
| }; |
| i2c0_pins: pinmux_i2c0_pins { |
| pinctrl-single,bits = < |
| /* I2C0_SDA,I2C0_SCL */ |
| 0x10 0x00002200 0x0000ff00 |
| >; |
| }; |
| i2c1_pins: pinmux_i2c1_pins { |
| pinctrl-single,bits = < |
| /* I2C1_SDA, I2C1_SCL */ |
| 0x10 0x00440000 0x00ff0000 |
| >; |
| }; |
| mmc0_pins: pinmux_mmc_pins { |
| pinctrl-single,bits = < |
| /* MMCSD0_DAT[3] MMCSD0_DAT[2] |
| * MMCSD0_DAT[1] MMCSD0_DAT[0] |
| * MMCSD0_CMD MMCSD0_CLK |
| */ |
| 0x28 0x00222222 0x00ffffff |
| >; |
| }; |
| ehrpwm0a_pins: pinmux_ehrpwm0a_pins { |
| pinctrl-single,bits = < |
| /* EPWM0A */ |
| 0xc 0x00000002 0x0000000f |
| >; |
| }; |
| ehrpwm0b_pins: pinmux_ehrpwm0b_pins { |
| pinctrl-single,bits = < |
| /* EPWM0B */ |
| 0xc 0x00000020 0x000000f0 |
| >; |
| }; |
| ehrpwm1a_pins: pinmux_ehrpwm1a_pins { |
| pinctrl-single,bits = < |
| /* EPWM1A */ |
| 0x14 0x00000002 0x0000000f |
| >; |
| }; |
| ehrpwm1b_pins: pinmux_ehrpwm1b_pins { |
| pinctrl-single,bits = < |
| /* EPWM1B */ |
| 0x14 0x00000020 0x000000f0 |
| >; |
| }; |
| ecap0_pins: pinmux_ecap0_pins { |
| pinctrl-single,bits = < |
| /* ECAP0_APWM0 */ |
| 0x8 0x20000000 0xf0000000 |
| >; |
| }; |
| ecap1_pins: pinmux_ecap1_pins { |
| pinctrl-single,bits = < |
| /* ECAP1_APWM1 */ |
| 0x4 0x40000000 0xf0000000 |
| >; |
| }; |
| ecap2_pins: pinmux_ecap2_pins { |
| pinctrl-single,bits = < |
| /* ECAP2_APWM2 */ |
| 0x4 0x00000004 0x0000000f |
| >; |
| }; |
| spi0_pins: pinmux_spi0_pins { |
| pinctrl-single,bits = < |
| /* SIMO, SOMI, CLK */ |
| 0xc 0x00001101 0x0000ff0f |
| >; |
| }; |
| spi0_cs0_pin: pinmux_spi0_cs0 { |
| pinctrl-single,bits = < |
| /* CS0 */ |
| 0x10 0x00000010 0x000000f0 |
| >; |
| }; |
| spi0_cs3_pin: pinmux_spi0_cs3_pin { |
| pinctrl-single,bits = < |
| /* CS3 */ |
| 0xc 0x01000000 0x0f000000 |
| >; |
| }; |
| spi1_pins: pinmux_spi1_pins { |
| pinctrl-single,bits = < |
| /* SIMO, SOMI, CLK */ |
| 0x14 0x00110100 0x00ff0f00 |
| >; |
| }; |
| spi1_cs0_pin: pinmux_spi1_cs0 { |
| pinctrl-single,bits = < |
| /* CS0 */ |
| 0x14 0x00000010 0x000000f0 |
| >; |
| }; |
| mdio_pins: pinmux_mdio_pins { |
| pinctrl-single,bits = < |
| /* MDIO_CLK, MDIO_D */ |
| 0x10 0x00000088 0x000000ff |
| >; |
| }; |
| mii_pins: pinmux_mii_pins { |
| pinctrl-single,bits = < |
| /* |
| * MII_TXEN, MII_TXCLK, MII_COL |
| * MII_TXD_3, MII_TXD_2, MII_TXD_1 |
| * MII_TXD_0 |
| */ |
| 0x8 0x88888880 0xfffffff0 |
| /* |
| * MII_RXER, MII_CRS, MII_RXCLK |
| * MII_RXDV, MII_RXD_3, MII_RXD_2 |
| * MII_RXD_1, MII_RXD_0 |
| */ |
| 0xc 0x88888888 0xffffffff |
| >; |
| }; |
| lcd_pins: pinmux_lcd_pins { |
| pinctrl-single,bits = < |
| /* |
| * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5], |
| * LCD_D[6], LCD_D[7] |
| */ |
| 0x40 0x22222200 0xffffff00 |
| /* |
| * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13], |
| * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1] |
| */ |
| 0x44 0x22222222 0xffffffff |
| /* LCD_D[8], LCD_D[9] */ |
| 0x48 0x00000022 0x000000ff |
| |
| /* LCD_PCLK */ |
| 0x48 0x02000000 0x0f000000 |
| /* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */ |
| 0x4c 0x02000022 0x0f0000ff |
| >; |
| }; |
| vpif_capture_pins: vpif_capture_pins { |
| pinctrl-single,bits = < |
| /* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */ |
| 0x38 0x11111111 0xffffffff |
| /* VP_DIN[10..15,0..1] */ |
| 0x3c 0x11111111 0xffffffff |
| /* VP_DIN[8..9] */ |
| 0x40 0x00000011 0x000000ff |
| >; |
| }; |
| vpif_display_pins: vpif_display_pins { |
| pinctrl-single,bits = < |
| /* VP_DOUT[2..7] */ |
| 0x40 0x11111100 0xffffff00 |
| /* VP_DOUT[10..15,0..1] */ |
| 0x44 0x11111111 0xffffffff |
| /* VP_DOUT[8..9] */ |
| 0x48 0x00000011 0x000000ff |
| /* |
| * VP_CLKOUT3, VP_CLKIN3, |
| * VP_CLKOUT2, VP_CLKIN2 |
| */ |
| 0x4c 0x00111100 0x00ffff00 |
| >; |
| }; |
| }; |
| prictrl: priority-controller@14110 { |
| compatible = "ti,da850-mstpri"; |
| reg = <0x14110 0x0c>; |
| status = "disabled"; |
| }; |
| cfgchip: chip-controller@1417c { |
| compatible = "ti,da830-cfgchip", "syscon", "simple-mfd"; |
| reg = <0x1417c 0x14>; |
| |
| usb_phy: usb-phy { |
| compatible = "ti,da830-usb-phy"; |
| #phy-cells = <1>; |
| status = "disabled"; |
| }; |
| }; |
| edma0: edma@0 { |
| compatible = "ti,edma3-tpcc"; |
| /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ |
| reg = <0x0 0x8000>; |
| reg-names = "edma3_cc"; |
| interrupts = <11 12>; |
| interrupt-names = "edma3_ccint", "edma3_ccerrint"; |
| #dma-cells = <2>; |
| |
| ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; |
| }; |
| edma0_tptc0: tptc@8000 { |
| compatible = "ti,edma3-tptc"; |
| reg = <0x8000 0x400>; |
| interrupts = <13>; |
| interrupt-names = "edm3_tcerrint"; |
| }; |
| edma0_tptc1: tptc@8400 { |
| compatible = "ti,edma3-tptc"; |
| reg = <0x8400 0x400>; |
| interrupts = <32>; |
| interrupt-names = "edm3_tcerrint"; |
| }; |
| edma1: edma@230000 { |
| compatible = "ti,edma3-tpcc"; |
| /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ |
| reg = <0x230000 0x8000>; |
| reg-names = "edma3_cc"; |
| interrupts = <93 94>; |
| interrupt-names = "edma3_ccint", "edma3_ccerrint"; |
| #dma-cells = <2>; |
| |
| ti,tptcs = <&edma1_tptc0 7>; |
| }; |
| edma1_tptc0: tptc@238000 { |
| compatible = "ti,edma3-tptc"; |
| reg = <0x238000 0x400>; |
| interrupts = <95>; |
| interrupt-names = "edm3_tcerrint"; |
| }; |
| serial0: serial@42000 { |
| compatible = "ti,da830-uart", "ns16550a"; |
| reg = <0x42000 0x100>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| interrupts = <25>; |
| status = "disabled"; |
| }; |
| serial1: serial@10c000 { |
| compatible = "ti,da830-uart", "ns16550a"; |
| reg = <0x10c000 0x100>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| interrupts = <53>; |
| status = "disabled"; |
| }; |
| serial2: serial@10d000 { |
| compatible = "ti,da830-uart", "ns16550a"; |
| reg = <0x10d000 0x100>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| interrupts = <61>; |
| status = "disabled"; |
| }; |
| rtc0: rtc@23000 { |
| compatible = "ti,da830-rtc"; |
| reg = <0x23000 0x1000>; |
| interrupts = <19 |
| 19>; |
| status = "disabled"; |
| }; |
| i2c0: i2c@22000 { |
| compatible = "ti,davinci-i2c"; |
| reg = <0x22000 0x1000>; |
| interrupts = <15>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| i2c1: i2c@228000 { |
| compatible = "ti,davinci-i2c"; |
| reg = <0x228000 0x1000>; |
| interrupts = <51>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| wdt: wdt@21000 { |
| compatible = "ti,davinci-wdt"; |
| reg = <0x21000 0x1000>; |
| status = "disabled"; |
| }; |
| mmc0: mmc@40000 { |
| compatible = "ti,da830-mmc"; |
| reg = <0x40000 0x1000>; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| interrupts = <16>; |
| dmas = <&edma0 16 0>, <&edma0 17 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| vpif: video@217000 { |
| compatible = "ti,da850-vpif"; |
| reg = <0x217000 0x1000>; |
| interrupts = <92>; |
| status = "disabled"; |
| |
| /* VPIF capture port */ |
| port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| /* VPIF display port */ |
| port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| mmc1: mmc@21b000 { |
| compatible = "ti,da830-mmc"; |
| reg = <0x21b000 0x1000>; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| interrupts = <72>; |
| dmas = <&edma1 28 0>, <&edma1 29 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| ehrpwm0: pwm@300000 { |
| compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", |
| "ti,am33xx-ehrpwm"; |
| #pwm-cells = <3>; |
| reg = <0x300000 0x2000>; |
| status = "disabled"; |
| }; |
| ehrpwm1: pwm@302000 { |
| compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", |
| "ti,am33xx-ehrpwm"; |
| #pwm-cells = <3>; |
| reg = <0x302000 0x2000>; |
| status = "disabled"; |
| }; |
| ecap0: ecap@306000 { |
| compatible = "ti,da850-ecap", "ti,am3352-ecap", |
| "ti,am33xx-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x306000 0x80>; |
| status = "disabled"; |
| }; |
| ecap1: ecap@307000 { |
| compatible = "ti,da850-ecap", "ti,am3352-ecap", |
| "ti,am33xx-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x307000 0x80>; |
| status = "disabled"; |
| }; |
| ecap2: ecap@308000 { |
| compatible = "ti,da850-ecap", "ti,am3352-ecap", |
| "ti,am33xx-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x308000 0x80>; |
| status = "disabled"; |
| }; |
| spi0: spi@41000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "ti,da830-spi"; |
| reg = <0x41000 0x1000>; |
| num-cs = <6>; |
| ti,davinci-spi-intr-line = <1>; |
| interrupts = <20>; |
| dmas = <&edma0 14 0>, <&edma0 15 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| spi1: spi@30e000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "ti,da830-spi"; |
| reg = <0x30e000 0x1000>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <1>; |
| interrupts = <56>; |
| dmas = <&edma0 18 0>, <&edma0 19 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| usb0: usb@200000 { |
| compatible = "ti,da830-musb"; |
| reg = <0x200000 0x10000>; |
| interrupts = <58>; |
| interrupt-names = "mc"; |
| dr_mode = "otg"; |
| phys = <&usb_phy 0>; |
| phy-names = "usb-phy"; |
| status = "disabled"; |
| }; |
| sata: sata@218000 { |
| compatible = "ti,da850-ahci"; |
| reg = <0x218000 0x2000>, <0x22c018 0x4>; |
| interrupts = <67>; |
| status = "disabled"; |
| }; |
| mdio: mdio@224000 { |
| compatible = "ti,davinci_mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x224000 0x1000>; |
| status = "disabled"; |
| }; |
| eth0: ethernet@220000 { |
| compatible = "ti,davinci-dm6467-emac"; |
| reg = <0x220000 0x4000>; |
| ti,davinci-ctrl-reg-offset = <0x3000>; |
| ti,davinci-ctrl-mod-reg-offset = <0x2000>; |
| ti,davinci-ctrl-ram-offset = <0>; |
| ti,davinci-ctrl-ram-size = <0x2000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <33 |
| 34 |
| 35 |
| 36 |
| >; |
| status = "disabled"; |
| }; |
| usb1: usb@225000 { |
| compatible = "ti,da830-ohci"; |
| reg = <0x225000 0x1000>; |
| interrupts = <59>; |
| phys = <&usb_phy 1>; |
| phy-names = "usb-phy"; |
| status = "disabled"; |
| }; |
| gpio: gpio@226000 { |
| compatible = "ti,dm6441-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x226000 0x1000>; |
| interrupts = <42 IRQ_TYPE_EDGE_BOTH |
| 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH |
| 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH |
| 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH |
| 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>; |
| ti,ngpio = <144>; |
| ti,davinci-gpio-unbanked = <0>; |
| status = "disabled"; |
| }; |
| pinconf: pin-controller@22c00c { |
| compatible = "ti,da850-pupd"; |
| reg = <0x22c00c 0x8>; |
| status = "disabled"; |
| }; |
| |
| mcasp0: mcasp@100000 { |
| compatible = "ti,da830-mcasp-audio"; |
| reg = <0x100000 0x2000>, |
| <0x102000 0x400000>; |
| reg-names = "mpu", "dat"; |
| interrupts = <54>; |
| interrupt-names = "common"; |
| status = "disabled"; |
| dmas = <&edma0 1 1>, |
| <&edma0 0 1>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| lcdc: display@213000 { |
| compatible = "ti,da850-tilcdc"; |
| reg = <0x213000 0x1000>; |
| interrupts = <52>; |
| max-pixelclock = <37500>; |
| status = "disabled"; |
| }; |
| }; |
| aemif: aemif@68000000 { |
| compatible = "ti,da850-aemif"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| |
| reg = <0x68000000 0x00008000>; |
| ranges = <0 0 0x60000000 0x08000000 |
| 1 0 0x68000000 0x00008000>; |
| status = "disabled"; |
| }; |
| memctrl: memory-controller@b0000000 { |
| compatible = "ti,da850-ddr-controller"; |
| reg = <0xb0000000 0xe8>; |
| status = "disabled"; |
| }; |
| }; |