| /* |
| * drivers/w1/masters/omap_hdq.c |
| * |
| * Copyright (C) 2007,2012 Texas Instruments, Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/sched.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "../w1.h" |
| #include "../w1_int.h" |
| |
| #define MOD_NAME "OMAP_HDQ:" |
| |
| #define OMAP_HDQ_REVISION 0x00 |
| #define OMAP_HDQ_TX_DATA 0x04 |
| #define OMAP_HDQ_RX_DATA 0x08 |
| #define OMAP_HDQ_CTRL_STATUS 0x0c |
| #define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK (1<<6) |
| #define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE (1<<5) |
| #define OMAP_HDQ_CTRL_STATUS_GO (1<<4) |
| #define OMAP_HDQ_CTRL_STATUS_INITIALIZATION (1<<2) |
| #define OMAP_HDQ_CTRL_STATUS_DIR (1<<1) |
| #define OMAP_HDQ_CTRL_STATUS_MODE (1<<0) |
| #define OMAP_HDQ_INT_STATUS 0x10 |
| #define OMAP_HDQ_INT_STATUS_TXCOMPLETE (1<<2) |
| #define OMAP_HDQ_INT_STATUS_RXCOMPLETE (1<<1) |
| #define OMAP_HDQ_INT_STATUS_TIMEOUT (1<<0) |
| #define OMAP_HDQ_SYSCONFIG 0x14 |
| #define OMAP_HDQ_SYSCONFIG_SOFTRESET (1<<1) |
| #define OMAP_HDQ_SYSCONFIG_AUTOIDLE (1<<0) |
| #define OMAP_HDQ_SYSSTATUS 0x18 |
| #define OMAP_HDQ_SYSSTATUS_RESETDONE (1<<0) |
| |
| #define OMAP_HDQ_FLAG_CLEAR 0 |
| #define OMAP_HDQ_FLAG_SET 1 |
| #define OMAP_HDQ_TIMEOUT (HZ/5) |
| |
| #define OMAP_HDQ_MAX_USER 4 |
| |
| static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); |
| static int w1_id; |
| |
| struct hdq_data { |
| struct device *dev; |
| void __iomem *hdq_base; |
| /* lock status update */ |
| struct mutex hdq_mutex; |
| int hdq_usecount; |
| u8 hdq_irqstatus; |
| /* device lock */ |
| spinlock_t hdq_spinlock; |
| /* |
| * Used to control the call to omap_hdq_get and omap_hdq_put. |
| * HDQ Protocol: Write the CMD|REG_address first, followed by |
| * the data wrire or read. |
| */ |
| int init_trans; |
| }; |
| |
| static int __devinit omap_hdq_probe(struct platform_device *pdev); |
| static int __devexit omap_hdq_remove(struct platform_device *pdev); |
| |
| static struct platform_driver omap_hdq_driver = { |
| .probe = omap_hdq_probe, |
| .remove = __devexit_p(omap_hdq_remove), |
| .driver = { |
| .name = "omap_hdq", |
| }, |
| }; |
| |
| static u8 omap_w1_read_byte(void *_hdq); |
| static void omap_w1_write_byte(void *_hdq, u8 byte); |
| static u8 omap_w1_reset_bus(void *_hdq); |
| static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev, |
| u8 search_type, w1_slave_found_callback slave_found); |
| |
| |
| static struct w1_bus_master omap_w1_master = { |
| .read_byte = omap_w1_read_byte, |
| .write_byte = omap_w1_write_byte, |
| .reset_bus = omap_w1_reset_bus, |
| .search = omap_w1_search_bus, |
| }; |
| |
| /* HDQ register I/O routines */ |
| static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset) |
| { |
| return __raw_readl(hdq_data->hdq_base + offset); |
| } |
| |
| static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val) |
| { |
| __raw_writel(val, hdq_data->hdq_base + offset); |
| } |
| |
| static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset, |
| u8 val, u8 mask) |
| { |
| u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask) |
| | (val & mask); |
| __raw_writel(new_val, hdq_data->hdq_base + offset); |
| |
| return new_val; |
| } |
| |
| /* |
| * Wait for one or more bits in flag change. |
| * HDQ_FLAG_SET: wait until any bit in the flag is set. |
| * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared. |
| * return 0 on success and -ETIMEDOUT in the case of timeout. |
| */ |
| static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset, |
| u8 flag, u8 flag_set, u8 *status) |
| { |
| int ret = 0; |
| unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; |
| |
| if (flag_set == OMAP_HDQ_FLAG_CLEAR) { |
| /* wait for the flag clear */ |
| while (((*status = hdq_reg_in(hdq_data, offset)) & flag) |
| && time_before(jiffies, timeout)) { |
| schedule_timeout_uninterruptible(1); |
| } |
| if (*status & flag) |
| ret = -ETIMEDOUT; |
| } else if (flag_set == OMAP_HDQ_FLAG_SET) { |
| /* wait for the flag set */ |
| while (!((*status = hdq_reg_in(hdq_data, offset)) & flag) |
| && time_before(jiffies, timeout)) { |
| schedule_timeout_uninterruptible(1); |
| } |
| if (!(*status & flag)) |
| ret = -ETIMEDOUT; |
| } else |
| return -EINVAL; |
| |
| return ret; |
| } |
| |
| /* write out a byte and fill *status with HDQ_INT_STATUS */ |
| static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status) |
| { |
| int ret; |
| u8 tmp_status; |
| unsigned long irqflags; |
| |
| *status = 0; |
| |
| spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); |
| /* clear interrupt flags via a dummy read */ |
| hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); |
| /* ISR loads it with new INT_STATUS */ |
| hdq_data->hdq_irqstatus = 0; |
| spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); |
| |
| hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val); |
| |
| /* set the GO bit */ |
| hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, |
| OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); |
| /* wait for the TXCOMPLETE bit */ |
| ret = wait_event_timeout(hdq_wait_queue, |
| hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); |
| if (ret == 0) { |
| dev_dbg(hdq_data->dev, "TX wait elapsed\n"); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| *status = hdq_data->hdq_irqstatus; |
| /* check irqstatus */ |
| if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) { |
| dev_dbg(hdq_data->dev, "timeout waiting for" |
| " TXCOMPLETE/RXCOMPLETE, %x", *status); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| /* wait for the GO bit return to zero */ |
| ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, |
| OMAP_HDQ_CTRL_STATUS_GO, |
| OMAP_HDQ_FLAG_CLEAR, &tmp_status); |
| if (ret) { |
| dev_dbg(hdq_data->dev, "timeout waiting GO bit" |
| " return to zero, %x", tmp_status); |
| } |
| |
| out: |
| return ret; |
| } |
| |
| /* HDQ Interrupt service routine */ |
| static irqreturn_t hdq_isr(int irq, void *_hdq) |
| { |
| struct hdq_data *hdq_data = _hdq; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); |
| hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); |
| spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); |
| dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus); |
| |
| if (hdq_data->hdq_irqstatus & |
| (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE |
| | OMAP_HDQ_INT_STATUS_TIMEOUT)) { |
| /* wake up sleeping process */ |
| wake_up(&hdq_wait_queue); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* HDQ Mode: always return success */ |
| static u8 omap_w1_reset_bus(void *_hdq) |
| { |
| return 0; |
| } |
| |
| /* W1 search callback function */ |
| static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev, |
| u8 search_type, w1_slave_found_callback slave_found) |
| { |
| u64 module_id, rn_le, cs, id; |
| |
| if (w1_id) |
| module_id = w1_id; |
| else |
| module_id = 0x1; |
| |
| rn_le = cpu_to_le64(module_id); |
| /* |
| * HDQ might not obey truly the 1-wire spec. |
| * So calculate CRC based on module parameter. |
| */ |
| cs = w1_calc_crc8((u8 *)&rn_le, 7); |
| id = (cs << 56) | module_id; |
| |
| slave_found(master_dev, id); |
| } |
| |
| static int _omap_hdq_reset(struct hdq_data *hdq_data) |
| { |
| int ret; |
| u8 tmp_status; |
| |
| hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET); |
| /* |
| * Select HDQ mode & enable clocks. |
| * It is observed that INT flags can't be cleared via a read and GO/INIT |
| * won't return to zero if interrupt is disabled. So we always enable |
| * interrupt. |
| */ |
| hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, |
| OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | |
| OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); |
| |
| /* wait for reset to complete */ |
| ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS, |
| OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status); |
| if (ret) |
| dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x", |
| tmp_status); |
| else { |
| hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, |
| OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | |
| OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); |
| hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, |
| OMAP_HDQ_SYSCONFIG_AUTOIDLE); |
| } |
| |
| return ret; |
| } |
| |
| /* Issue break pulse to the device */ |
| static int omap_hdq_break(struct hdq_data *hdq_data) |
| { |
| int ret = 0; |
| u8 tmp_status; |
| unsigned long irqflags; |
| |
| ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); |
| if (ret < 0) { |
| dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); |
| ret = -EINTR; |
| goto rtn; |
| } |
| |
| spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); |
| /* clear interrupt flags via a dummy read */ |
| hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); |
| /* ISR loads it with new INT_STATUS */ |
| hdq_data->hdq_irqstatus = 0; |
| spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); |
| |
| /* set the INIT and GO bit */ |
| hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, |
| OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, |
| OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION | |
| OMAP_HDQ_CTRL_STATUS_GO); |
| |
| /* wait for the TIMEOUT bit */ |
| ret = wait_event_timeout(hdq_wait_queue, |
| hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); |
| if (ret == 0) { |
| dev_dbg(hdq_data->dev, "break wait elapsed\n"); |
| ret = -EINTR; |
| goto out; |
| } |
| |
| tmp_status = hdq_data->hdq_irqstatus; |
| /* check irqstatus */ |
| if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) { |
| dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x", |
| tmp_status); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| /* |
| * wait for both INIT and GO bits rerurn to zero. |
| * zero wait time expected for interrupt mode. |
| */ |
| ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, |
| OMAP_HDQ_CTRL_STATUS_INITIALIZATION | |
| OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, |
| &tmp_status); |
| if (ret) |
| dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits" |
| " return to zero, %x", tmp_status); |
| |
| out: |
| mutex_unlock(&hdq_data->hdq_mutex); |
| rtn: |
| return ret; |
| } |
| |
| static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) |
| { |
| int ret = 0; |
| u8 status; |
| |
| ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); |
| if (ret < 0) { |
| ret = -EINTR; |
| goto rtn; |
| } |
| |
| if (!hdq_data->hdq_usecount) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { |
| hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, |
| OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, |
| OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); |
| /* |
| * The RX comes immediately after TX. |
| */ |
| wait_event_timeout(hdq_wait_queue, |
| (hdq_data->hdq_irqstatus |
| & OMAP_HDQ_INT_STATUS_RXCOMPLETE), |
| OMAP_HDQ_TIMEOUT); |
| |
| hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0, |
| OMAP_HDQ_CTRL_STATUS_DIR); |
| status = hdq_data->hdq_irqstatus; |
| /* check irqstatus */ |
| if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { |
| dev_dbg(hdq_data->dev, "timeout waiting for" |
| " RXCOMPLETE, %x", status); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| } |
| /* the data is ready. Read it in! */ |
| *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA); |
| out: |
| mutex_unlock(&hdq_data->hdq_mutex); |
| rtn: |
| return ret; |
| |
| } |
| |
| /* Enable clocks and set the controller to HDQ mode */ |
| static int omap_hdq_get(struct hdq_data *hdq_data) |
| { |
| int ret = 0; |
| |
| ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); |
| if (ret < 0) { |
| ret = -EINTR; |
| goto rtn; |
| } |
| |
| if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) { |
| dev_dbg(hdq_data->dev, "attempt to exceed the max use count"); |
| ret = -EINVAL; |
| goto out; |
| } else { |
| hdq_data->hdq_usecount++; |
| try_module_get(THIS_MODULE); |
| if (1 == hdq_data->hdq_usecount) { |
| |
| pm_runtime_get_sync(hdq_data->dev); |
| |
| /* make sure HDQ is out of reset */ |
| if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) & |
| OMAP_HDQ_SYSSTATUS_RESETDONE)) { |
| ret = _omap_hdq_reset(hdq_data); |
| if (ret) |
| /* back up the count */ |
| hdq_data->hdq_usecount--; |
| } else { |
| /* select HDQ mode & enable clocks */ |
| hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, |
| OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | |
| OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); |
| hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, |
| OMAP_HDQ_SYSCONFIG_AUTOIDLE); |
| hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); |
| } |
| } |
| } |
| |
| out: |
| mutex_unlock(&hdq_data->hdq_mutex); |
| rtn: |
| return ret; |
| } |
| |
| /* Disable clocks to the module */ |
| static int omap_hdq_put(struct hdq_data *hdq_data) |
| { |
| int ret = 0; |
| |
| ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); |
| if (ret < 0) |
| return -EINTR; |
| |
| if (0 == hdq_data->hdq_usecount) { |
| dev_dbg(hdq_data->dev, "attempt to decrement use count" |
| " when it is zero"); |
| ret = -EINVAL; |
| } else { |
| hdq_data->hdq_usecount--; |
| module_put(THIS_MODULE); |
| if (0 == hdq_data->hdq_usecount) |
| pm_runtime_put_sync(hdq_data->dev); |
| } |
| mutex_unlock(&hdq_data->hdq_mutex); |
| |
| return ret; |
| } |
| |
| /* Read a byte of data from the device */ |
| static u8 omap_w1_read_byte(void *_hdq) |
| { |
| struct hdq_data *hdq_data = _hdq; |
| u8 val = 0; |
| int ret; |
| |
| ret = hdq_read_byte(hdq_data, &val); |
| if (ret) { |
| ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); |
| if (ret < 0) { |
| dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); |
| return -EINTR; |
| } |
| hdq_data->init_trans = 0; |
| mutex_unlock(&hdq_data->hdq_mutex); |
| omap_hdq_put(hdq_data); |
| return -1; |
| } |
| |
| /* Write followed by a read, release the module */ |
| if (hdq_data->init_trans) { |
| ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); |
| if (ret < 0) { |
| dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); |
| return -EINTR; |
| } |
| hdq_data->init_trans = 0; |
| mutex_unlock(&hdq_data->hdq_mutex); |
| omap_hdq_put(hdq_data); |
| } |
| |
| return val; |
| } |
| |
| /* Write a byte of data to the device */ |
| static void omap_w1_write_byte(void *_hdq, u8 byte) |
| { |
| struct hdq_data *hdq_data = _hdq; |
| int ret; |
| u8 status; |
| |
| /* First write to initialize the transfer */ |
| if (hdq_data->init_trans == 0) |
| omap_hdq_get(hdq_data); |
| |
| ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); |
| if (ret < 0) { |
| dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); |
| return; |
| } |
| hdq_data->init_trans++; |
| mutex_unlock(&hdq_data->hdq_mutex); |
| |
| ret = hdq_write_byte(hdq_data, byte, &status); |
| if (ret < 0) { |
| dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status); |
| return; |
| } |
| |
| /* Second write, data transferred. Release the module */ |
| if (hdq_data->init_trans > 1) { |
| omap_hdq_put(hdq_data); |
| ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); |
| if (ret < 0) { |
| dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); |
| return; |
| } |
| hdq_data->init_trans = 0; |
| mutex_unlock(&hdq_data->hdq_mutex); |
| } |
| } |
| |
| static int __devinit omap_hdq_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct hdq_data *hdq_data; |
| struct resource *res; |
| int ret, irq; |
| u8 rev; |
| |
| hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL); |
| if (!hdq_data) { |
| dev_dbg(&pdev->dev, "unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| hdq_data->dev = dev; |
| platform_set_drvdata(pdev, hdq_data); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_dbg(&pdev->dev, "unable to get resource\n"); |
| return -ENXIO; |
| } |
| |
| hdq_data->hdq_base = devm_request_and_ioremap(dev, res); |
| if (!hdq_data->hdq_base) { |
| dev_dbg(&pdev->dev, "ioremap failed\n"); |
| return -ENOMEM; |
| } |
| |
| hdq_data->hdq_usecount = 0; |
| mutex_init(&hdq_data->hdq_mutex); |
| |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_get_sync(&pdev->dev); |
| |
| rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION); |
| dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n", |
| (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt"); |
| |
| spin_lock_init(&hdq_data->hdq_spinlock); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| ret = -ENXIO; |
| goto err_irq; |
| } |
| |
| ret = devm_request_irq(dev, irq, hdq_isr, IRQF_DISABLED, |
| "omap_hdq", hdq_data); |
| if (ret < 0) { |
| dev_dbg(&pdev->dev, "could not request irq\n"); |
| goto err_irq; |
| } |
| |
| omap_hdq_break(hdq_data); |
| |
| pm_runtime_put_sync(&pdev->dev); |
| |
| omap_w1_master.data = hdq_data; |
| |
| ret = w1_add_master_device(&omap_w1_master); |
| if (ret) { |
| dev_dbg(&pdev->dev, "Failure in registering w1 master\n"); |
| goto err_w1; |
| } |
| |
| return 0; |
| |
| err_irq: |
| pm_runtime_put_sync(&pdev->dev); |
| err_w1: |
| pm_runtime_disable(&pdev->dev); |
| |
| return ret; |
| } |
| |
| static int __devexit omap_hdq_remove(struct platform_device *pdev) |
| { |
| struct hdq_data *hdq_data = platform_get_drvdata(pdev); |
| |
| mutex_lock(&hdq_data->hdq_mutex); |
| |
| if (hdq_data->hdq_usecount) { |
| dev_dbg(&pdev->dev, "removed when use count is not zero\n"); |
| mutex_unlock(&hdq_data->hdq_mutex); |
| return -EBUSY; |
| } |
| |
| mutex_unlock(&hdq_data->hdq_mutex); |
| |
| /* remove module dependency */ |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| module_platform_driver(omap_hdq_driver); |
| |
| module_param(w1_id, int, S_IRUSR); |
| MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection"); |
| |
| MODULE_AUTHOR("Texas Instruments"); |
| MODULE_DESCRIPTION("HDQ driver Library"); |
| MODULE_LICENSE("GPL"); |