wusb: handle wusb device ep0 speed settings
This patch teaches the USB stack handling of WUSB devices (those whose
speed is USB_SPEED_VARIABLE). For these devices, we need to set ep0's
maxpacketsize to 512 (even though the device descriptor reports it as
0xff).
New code being pushed to linuxuwb.org requires this patch to connect WUSB
devices.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index db4a9be..1bd5ee2 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2060,8 +2060,13 @@
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
+ * For Wireless USB devices, ep0 max packet is always 512 (tho
+ * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
*/
switch (udev->speed) {
+ case USB_SPEED_VARIABLE: /* fixed at 512 */
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+ break;
case USB_SPEED_HIGH: /* fixed at 64 */
udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
break;
@@ -2131,6 +2136,8 @@
* down tremendously by NAKing the unexpectedly
* early status stage. Also, retry on all errors;
* some devices are flakey.
+ * 255 is for WUSB devices, we actually need to use 512.
+ * WUSB1.0[4.8.1].
*/
for (j = 0; j < 3; ++j) {
buf->bMaxPacketSize0 = 0;
@@ -2140,7 +2147,7 @@
buf, GET_DESCRIPTOR_BUFSIZE,
(i ? USB_CTRL_GET_TIMEOUT : 1000));
switch (buf->bMaxPacketSize0) {
- case 8: case 16: case 32: case 64:
+ case 8: case 16: case 32: case 64: case 255:
if (buf->bDescriptorType ==
USB_DT_DEVICE) {
r = 0;
@@ -2214,7 +2221,8 @@
if (retval)
goto fail;
- i = udev->descriptor.bMaxPacketSize0;
+ i = udev->descriptor.bMaxPacketSize0 == 0xff?
+ 512 : udev->descriptor.bMaxPacketSize0;
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
if (udev->speed != USB_SPEED_FULL ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {