Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index dc27659..c8bce82 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -90,7 +90,7 @@
It also defines this helper for defining device attributes:
-#define DEVICE_ATTR(_name,_mode,_show,_store) \
+#define DEVICE_ATTR(_name, _mode, _show, _store) \
struct device_attribute dev_attr_##_name = { \
.attr = {.name = __stringify(_name) , .mode = _mode }, \
.show = _show, \
@@ -99,14 +99,14 @@
For example, declaring
-static DEVICE_ATTR(foo,0644,show_foo,store_foo);
+static DEVICE_ATTR(foo, S_IWUSR | S_IRUGO, show_foo, store_foo);
is equivalent to doing:
static struct device_attribute dev_attr_foo = {
.attr = {
.name = "foo",
- .mode = 0644,
+ .mode = S_IWUSR | S_IRUGO,
},
.show = show_foo,
.store = store_foo,
@@ -121,8 +121,8 @@
show and store methods of the attribute owners.
struct sysfs_ops {
- ssize_t (*show)(struct kobject *, struct attribute *,char *);
- ssize_t (*store)(struct kobject *,struct attribute *,const char *);
+ ssize_t (*show)(struct kobject *, struct attribute *, char *);
+ ssize_t (*store)(struct kobject *, struct attribute *, const char *);
};
[ Subsystems should have already defined a struct kobj_type as a
@@ -137,7 +137,7 @@
To illustrate:
-#define to_dev_attr(_attr) container_of(_attr,struct device_attribute,attr)
+#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
#define to_dev(d) container_of(d, struct device, kobj)
static ssize_t
@@ -148,7 +148,7 @@
ssize_t ret = 0;
if (dev_attr->show)
- ret = dev_attr->show(dev,buf);
+ ret = dev_attr->show(dev, buf);
return ret;
}
@@ -216,16 +216,16 @@
static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
{
- return sprintf(buf,"%s\n",dev->name);
+ return snprintf(buf, PAGE_SIZE, "%s\n", dev->name);
}
static ssize_t store_name(struct device * dev, const char * buf)
{
- sscanf(buf,"%20s",dev->name);
- return strlen(buf);
+ sscanf(buf, "%20s", dev->name);
+ return strnlen(buf, PAGE_SIZE);
}
-static DEVICE_ATTR(name,S_IRUGO,show_name,store_name);
+static DEVICE_ATTR(name, S_IRUGO, show_name, store_name);
(Note that the real implementation doesn't allow userspace to set the
@@ -290,7 +290,7 @@
Declaring:
-DEVICE_ATTR(_name,_str,_mode,_show,_store);
+DEVICE_ATTR(_name, _str, _mode, _show, _store);
Creation/Removal:
@@ -310,7 +310,7 @@
Declaring:
-BUS_ATTR(_name,_mode,_show,_store)
+BUS_ATTR(_name, _mode, _show, _store)
Creation/Removal:
@@ -331,7 +331,7 @@
Declaring:
-DRIVER_ATTR(_name,_mode,_show,_store)
+DRIVER_ATTR(_name, _mode, _show, _store)
Creation/Removal:
diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78
index 357086e..fd5dc7a 100644
--- a/Documentation/hwmon/lm78
+++ b/Documentation/hwmon/lm78
@@ -2,16 +2,11 @@
==================
Supported chips:
- * National Semiconductor LM78
+ * National Semiconductor LM78 / LM78-J
Prefix: 'lm78'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
- * National Semiconductor LM78-J
- Prefix: 'lm78-j'
- Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
- Datasheet: Publicly available at the National Semiconductor website
- http://www.national.com/
* National Semiconductor LM79
Prefix: 'lm79'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d
new file mode 100644
index 0000000..8171c28
--- /dev/null
+++ b/Documentation/hwmon/w83792d
@@ -0,0 +1,174 @@
+Kernel driver w83792d
+=====================
+
+Supported chips:
+ * Winbond W83792D
+ Prefix: 'w83792d'
+ Addresses scanned: I2C 0x2c - 0x2f
+ Datasheet: http://www.winbond.com.tw/E-WINBONDHTM/partner/PDFresult.asp?Pname=1035
+
+Author: Chunhao Huang
+Contact: DZShen <DZShen@Winbond.com.tw>
+
+
+Module Parameters
+-----------------
+
+* init int
+ (default 1)
+ Use 'init=0' to bypass initializing the chip.
+ Try this if your computer crashes when you load the module.
+
+* force_subclients=bus,caddr,saddr,saddr
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b'
+ to force the subclients of chip 0x2f on bus 0 to i2c addresses
+ 0x4a and 0x4b.
+
+
+Description
+-----------
+
+This driver implements support for the Winbond W83792AD/D.
+
+Detection of the chip can sometimes be foiled because it can be in an
+internal state that allows no clean access (Bank with ID register is not
+currently selected). If you know the address of the chip, use a 'force'
+parameter; this will put it into a more well-behaved state first.
+
+The driver implements three temperature sensors, seven fan rotation speed
+sensors, nine voltage sensors, and two automatic fan regulation
+strategies called: Smart Fan I (Thermal Cruise mode) and Smart Fan II.
+Automatic fan control mode is possible only for fan1-fan3. Fan4-fan7 can run
+synchronized with selected fan (fan1-fan3). This functionality and manual PWM
+control for fan4-fan7 is not yet implemented.
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
+the temperature gets higher than the Overtemperature Shutdown value; it stays
+on until the temperature falls below the Hysteresis value.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64 or
+128) to give the readings more range or accuracy.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+Alarms are provided as output from "realtime status register". Following bits
+are defined:
+
+bit - alarm on:
+0 - in0
+1 - in1
+2 - temp1
+3 - temp2
+4 - temp3
+5 - fan1
+6 - fan2
+7 - fan3
+8 - in2
+9 - in3
+10 - in4
+11 - in5
+12 - in6
+13 - VID change
+14 - chassis
+15 - fan7
+16 - tart1
+17 - tart2
+18 - tart3
+19 - in7
+20 - in8
+21 - fan4
+22 - fan5
+23 - fan6
+
+Tart will be asserted while target temperature cannot be achieved after 3 minutes
+of full speed rotation of corresponding fan.
+
+In addition to the alarms described above, there is a CHAS alarm on the chips
+which triggers if your computer case is open (This one is latched, contrary
+to realtime alarms).
+
+The chips only update values each 3 seconds; reading them more often will
+do no harm, but will return 'old' values.
+
+
+W83792D PROBLEMS
+----------------
+Known problems:
+ - This driver is only for Winbond W83792D C version device, there
+ are also some motherboards with B version W83792D device. The
+ calculation method to in6-in7(measured value, limits) is a little
+ different between C and B version. C or B version can be identified
+ by CR[0x49h].
+ - The function of vid and vrm has not been finished, because I'm NOT
+ very familiar with them. Adding support is welcome.
+ - The function of chassis open detection needs more tests.
+ - If you have ASUS server board and chip was not found: Then you will
+ need to upgrade to latest (or beta) BIOS. If it does not help please
+ contact us.
+
+Fan control
+-----------
+
+Manual mode
+-----------
+
+Works as expected. You just need to specify desired PWM/DC value (fan speed)
+in appropriate pwm# file.
+
+Thermal cruise
+--------------
+
+In this mode, W83792D provides the Smart Fan system to automatically control
+fan speed to keep the temperatures of CPU and the system within specific
+range. At first a wanted temperature and interval must be set. This is done
+via thermal_cruise# file. The tolerance# file serves to create T +- tolerance
+interval. The fan speed will be lowered as long as the current temperature
+remains below the thermal_cruise# +- tolerance# value. Once the temperature
+exceeds the high limit (T+tolerance), the fan will be turned on with a
+specific speed set by pwm# and automatically controlled its PWM duty cycle
+with the temperature varying. Three conditions may occur:
+
+(1) If the temperature still exceeds the high limit, PWM duty
+cycle will increase slowly.
+
+(2) If the temperature goes below the high limit, but still above the low
+limit (T-tolerance), the fan speed will be fixed at the current speed because
+the temperature is in the target range.
+
+(3) If the temperature goes below the low limit, PWM duty cycle will decrease
+slowly to 0 or a preset stop value until the temperature exceeds the low
+limit. (The preset stop value handling is not yet implemented in driver)
+
+Smart Fan II
+------------
+
+W83792D also provides a special mode for fan. Four temperature points are
+available. When related temperature sensors detects the temperature in preset
+temperature region (sf2_point@_fan# +- tolerance#) it will cause fans to run
+on programmed value from sf2_level@_fan#. You need to set four temperatures
+for each fan.
+
+
+/sys files
+----------
+
+pwm[1-3] - this file stores PWM duty cycle or DC value (fan speed) in range:
+ 0 (stop) to 255 (full)
+pwm[1-3]_enable - this file controls mode of fan/temperature control:
+ * 0 Disabled
+ * 1 Manual mode
+ * 2 Smart Fan II
+ * 3 Thermal Cruise
+pwm[1-3]_mode - Select PWM of DC mode
+ * 0 DC
+ * 1 PWM
+thermal_cruise[1-3] - Selects the desired temperature for cruise (degC)
+tolerance[1-3] - Value in degrees of Celsius (degC) for +- T
+sf2_point[1-4]_fan[1-3] - four temperature points for each fan for Smart Fan II
+sf2_level[1-3]_fan[1-3] - three PWM/DC levels for each fan for Smart Fan II
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875
index b020028..96fec56 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/i2c/chips/max6875
@@ -4,22 +4,13 @@
Supported chips:
* Maxim MAX6874, MAX6875
Prefix: 'max6875'
- Addresses scanned: 0x50, 0x52
+ Addresses scanned: None (see below)
Datasheet:
http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
Author: Ben Gardner <bgardner@wabtec.com>
-Module Parameters
------------------
-
-* allow_write int
- Set to non-zero to enable write permission:
- *0: Read only
- 1: Read and write
-
-
Description
-----------
@@ -33,34 +24,85 @@
The Maxim MAX6874 is a similar, mostly compatible device, with more intputs
and outputs:
-
vin gpi vout
MAX6874 6 4 8
MAX6875 4 3 5
-MAX6874 chips can have four different addresses (as opposed to only two for
-the MAX6875). The additional addresses (0x54 and 0x56) are not probed by
-this driver by default, but the probe module parameter can be used if
-needed.
-
-See the datasheet for details on how to program the EEPROM.
+See the datasheet for more information.
Sysfs entries
-------------
-eeprom_user - 512 bytes of user-defined EEPROM space. Only writable if
- allow_write was set and register 0x43 is 0.
-
-eeprom_config - 70 bytes of config EEPROM. Note that changes will not get
- loaded into register space until a power cycle or device reset.
-
-reg_config - 70 bytes of register space. Any changes take affect immediately.
+eeprom - 512 bytes of user-defined EEPROM space.
General Remarks
---------------
-A typical application will require that the EEPROMs be programmed once and
-never altered afterwards.
+Valid addresses for the MAX6875 are 0x50 and 0x52.
+Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
+The driver does not probe any address, so you must force the address.
+
+Example:
+$ modprobe max6875 force=0,0x50
+
+The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
+addresses. For example, for address 0x50, it also reserves 0x51.
+The even-address instance is called 'max6875', the odd one is 'max6875 subclient'.
+
+
+Programming the chip using i2c-dev
+----------------------------------
+
+Use the i2c-dev interface to access and program the chips.
+Reads and writes are performed differently depending on the address range.
+
+The configuration registers are at addresses 0x00 - 0x45.
+Use i2c_smbus_write_byte_data() to write a register and
+i2c_smbus_read_byte_data() to read a register.
+The command is the register number.
+
+Examples:
+To write a 1 to register 0x45:
+ i2c_smbus_write_byte_data(fd, 0x45, 1);
+
+To read register 0x45:
+ value = i2c_smbus_read_byte_data(fd, 0x45);
+
+
+The configuration EEPROM is at addresses 0x8000 - 0x8045.
+The user EEPROM is at addresses 0x8100 - 0x82ff.
+
+Use i2c_smbus_write_word_data() to write a byte to EEPROM.
+
+The command is the upper byte of the address: 0x80, 0x81, or 0x82.
+The data word is the lower part of the address or'd with data << 8.
+ cmd = address >> 8;
+ val = (address & 0xff) | (data << 8);
+
+Example:
+To write 0x5a to address 0x8003:
+ i2c_smbus_write_word_data(fd, 0x80, 0x5a03);
+
+
+Reading data from the EEPROM is a little more complicated.
+Use i2c_smbus_write_byte_data() to set the read address and then
+i2c_smbus_read_byte() or i2c_smbus_read_i2c_block_data() to read the data.
+
+Example:
+To read data starting at offset 0x8100, first set the address:
+ i2c_smbus_write_byte_data(fd, 0x81, 0x00);
+
+And then read the data
+ value = i2c_smbus_read_byte(fd);
+
+ or
+
+ count = i2c_smbus_read_i2c_block_data(fd, 0x84, buffer);
+
+The block read should read 16 bytes.
+0x84 is the block read command.
+
+See the datasheet for more details.
diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index 8a78a95..41ffefb 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -115,7 +115,7 @@
If you try to access an adapter from a userspace program, you will have
to use the /dev interface. You will still have to check whether the
functionality you need is supported, of course. This is done using
-the I2C_FUNCS ioctl. An example, adapted from the lm_sensors i2c_detect
+the I2C_FUNCS ioctl. An example, adapted from the lm_sensors i2cdetect
program, is below:
int file;
diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
index a7adbdd..4849dfd 100644
--- a/Documentation/i2c/porting-clients
+++ b/Documentation/i2c/porting-clients
@@ -1,4 +1,4 @@
-Revision 4, 2004-03-30
+Revision 5, 2005-07-29
Jean Delvare <khali@linux-fr.org>
Greg KH <greg@kroah.com>
@@ -17,20 +17,22 @@
Technical changes:
-* [Includes] Get rid of "version.h". Replace <linux/i2c-proc.h> with
- <linux/i2c-sensor.h>. Includes typically look like that:
+* [Includes] Get rid of "version.h" and <linux/i2c-proc.h>.
+ Includes typically look like that:
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
- #include <linux/i2c-sensor.h>
- #include <linux/i2c-vid.h> /* if you need VRM support */
+ #include <linux/hwmon.h> /* for hardware monitoring drivers */
+ #include <linux/hwmon-sysfs.h>
+ #include <linux/hwmon-vid.h> /* if you need VRM support */
#include <asm/io.h> /* if you have I/O operations */
Please respect this inclusion order. Some extra headers may be
required for a given driver (e.g. "lm75.h").
-* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, SENSORS_ISA_END
- becomes I2C_CLIENT_ISA_END.
+* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses
+ are no more handled by the i2c core.
+ SENSORS_INSMOD_<n> becomes I2C_CLIENT_INSMOD_<n>.
* [Client data] Get rid of sysctl_id. Try using standard names for
register values (for example, temp_os becomes temp_max). You're
@@ -66,13 +68,15 @@
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
ISA-only drivers of course don't need this.
+ Call i2c_probe() instead of i2c_detect().
* [Detect] As mentioned earlier, the flags parameter is gone.
The type_name and client_name strings are replaced by a single
name string, which will be filled with a lowercase, short string
(typically the driver name, e.g. "lm75").
In i2c-only drivers, drop the i2c_is_isa_adapter check, it's
- useless.
+ useless. Same for isa-only drivers, as the test would always be
+ true. Only hybrid drivers (which are quite rare) still need it.
The errorN labels are reduced to the number needed. If that number
is 2 (i2c-only drivers), it is advised that the labels are named
exit and exit_free. For i2c+isa drivers, labels should be named
@@ -86,6 +90,8 @@
device_create_file. Move the driver initialization before any
sysfs file creation.
Drop client->id.
+ Drop any 24RF08 corruption prevention you find, as this is now done
+ at the i2c-core level, and doing it twice voids it.
* [Init] Limits must not be set by the driver (can be done later in
user-space). Chip should not be reset default (although a module
@@ -93,7 +99,8 @@
limited to the strictly necessary steps.
* [Detach] Get rid of data, remove the call to
- i2c_deregister_entry.
+ i2c_deregister_entry. Do not log an error message if
+ i2c_detach_client fails, as i2c-core will now do it for you.
* [Update] Don't access client->data directly, use
i2c_get_clientdata(client) instead.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 91664be..0772757 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -148,15 +148,15 @@
detection algorithm.
You do not have to use this parameter interface; but don't try to use
-function i2c_probe() (or i2c_detect()) if you don't.
+function i2c_probe() if you don't.
NOTE: If you want to write a `sensors' driver, the interface is slightly
different! See below.
-Probing classes (i2c)
----------------------
+Probing classes
+---------------
All parameters are given as lists of unsigned 16-bit integers. Lists are
terminated by I2C_CLIENT_END.
@@ -171,12 +171,18 @@
ignore: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. These addresses are never probed.
- This parameter overrules 'normal' and 'probe', but not the 'force' lists.
+ This parameter overrules the 'normal_i2c' list only.
force: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. A device is blindly assumed to be on
the given address, no probing is done.
+Additionally, kind-specific force lists may optionally be defined if
+the driver supports several chip kinds. They are grouped in a
+NULL-terminated list of pointers named forces, those first element if the
+generic force list mentioned above. Each additional list correspond to an
+insmod parameter of the form force_<kind>.
+
Fortunately, as a module writer, you just have to define the `normal_i2c'
parameter. The complete declaration could look like this:
@@ -186,66 +192,17 @@
/* Magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
+ /* Or, if your driver supports, say, 2 kind of devices: */
+ I2C_CLIENT_INSMOD_2(foo, bar);
+
+If you use the multi-kind form, an enum will be defined for you:
+ enum chips { any_chip, foo, bar, ... }
+You can then (and certainly should) use it in the driver code.
Note that you *have* to call the defined variable `normal_i2c',
without any prefix!
-Probing classes (sensors)
--------------------------
-
-If you write a `sensors' driver, you use a slightly different interface.
-As well as I2C addresses, we have to cope with ISA addresses. Also, we
-use a enum of chip types. Don't forget to include `sensors.h'.
-
-The following lists are used internally. They are all lists of integers.
-
- normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END.
- A list of I2C addresses which should normally be examined.
- normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
- A list of ISA addresses which should normally be examined.
- probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
- A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second is the address. These
- addresses are also probed, as if they were in the 'normal' list.
- ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values.
- A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second is the I2C address. These
- addresses are never probed. This parameter overrules 'normal' and
- 'probe', but not the 'force' lists.
-
-Also used is a list of pointers to sensors_force_data structures:
- force_data: insmod parameters. A list, ending with an element of which
- the force field is NULL.
- Each element contains the type of chip and a list of pairs.
- The first value is a bus number (SENSORS_ISA_BUS for the ISA bus,
- -1 for any I2C bus), the second is the address.
- These are automatically translated to insmod variables of the form
- force_foo.
-
-So we have a generic insmod variabled `force', and chip-specific variables
-`force_CHIPNAME'.
-
-Fortunately, as a module writer, you just have to define the `normal_i2c'
-and `normal_isa' parameters, and define what chip names are used.
-The complete declaration could look like this:
- /* Scan i2c addresses 0x37, and 0x48 to 0x4f */
- static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
- 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
- /* Scan ISA address 0x290 */
- static unsigned int normal_isa[] = {0x0290,SENSORS_ISA_END};
-
- /* Define chips foo and bar, as well as all module parameters and things */
- SENSORS_INSMOD_2(foo,bar);
-
-If you have one chip, you use macro SENSORS_INSMOD_1(chip), if you have 2
-you use macro SENSORS_INSMOD_2(chip1,chip2), etc. If you do not want to
-bother with chip types, you can use SENSORS_INSMOD_0.
-
-A enum is automatically defined as follows:
- enum chips { any_chip, chip1, chip2, ... }
-
-
Attaching to an adapter
-----------------------
@@ -264,17 +221,10 @@
return i2c_probe(adapter,&addr_data,&foo_detect_client);
}
-For `sensors' drivers, use the i2c_detect function instead:
-
- int foo_attach_adapter(struct i2c_adapter *adapter)
- {
- return i2c_detect(adapter,&addr_data,&foo_detect_client);
- }
-
Remember, structure `addr_data' is defined by the macros explained above,
so you do not have to define it yourself.
-The i2c_probe or i2c_detect function will call the foo_detect_client
+The i2c_probe function will call the foo_detect_client
function only for those i2c addresses that actually have a device on
them (unless a `force' parameter was used). In addition, addresses that
are already in use (by some other registered client) are skipped.
@@ -283,19 +233,18 @@
The detect client function
--------------------------
-The detect client function is called by i2c_probe or i2c_detect.
-The `kind' parameter contains 0 if this call is due to a `force'
-parameter, and -1 otherwise (for i2c_detect, it contains 0 if
-this call is due to the generic `force' parameter, and the chip type
-number if it is due to a specific `force' parameter).
+The detect client function is called by i2c_probe. The `kind' parameter
+contains -1 for a probed detection, 0 for a forced detection, or a positive
+number for a forced detection with a chip type forced.
Below, some things are only needed if this is a `sensors' driver. Those
parts are between /* SENSORS ONLY START */ and /* SENSORS ONLY END */
markers.
-This function should only return an error (any value != 0) if there is
-some reason why no more detection should be done anymore. If the
-detection just fails for this address, return 0.
+Returning an error different from -ENODEV in a detect function will cause
+the detection to stop: other addresses and adapters won't be scanned.
+This should only be done on fatal or internal errors, such as a memory
+shortage or i2c_attach_client failing.
For now, you can ignore the `flags' parameter. It is there for future use.
@@ -320,11 +269,10 @@
const char *type_name = "";
int is_isa = i2c_is_isa_adapter(adapter);
- if (is_isa) {
+ /* Do this only if the chip can additionally be found on the ISA bus
+ (hybrid chip). */
- /* If this client can't be on the ISA bus at all, we can stop now
- (call `goto ERROR0'). But for kicks, we will assume it is all
- right. */
+ if (is_isa) {
/* Discard immediately if this ISA range is already used */
if (check_region(address,FOO_EXTENT))
@@ -495,15 +443,13 @@
/* SENSORS ONLY END */
/* Try to detach the client from i2c space */
- if ((err = i2c_detach_client(client))) {
- printk("foo.o: Client deregistration failed, client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
- /* SENSORS ONLY START */
+ /* HYBRID SENSORS CHIP ONLY START */
if i2c_is_isa_client(client)
release_region(client->addr,LM78_EXTENT);
- /* SENSORS ONLY END */
+ /* HYBRID SENSORS CHIP ONLY END */
kfree(client); /* Frees client data too, if allocated at the same time */
return 0;
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 2616a58..9a15865 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -872,7 +872,13 @@
Assignments to $(targets) are without $(obj)/ prefix.
if_changed may be used in conjunction with custom commands as
defined in 6.7 "Custom kbuild commands".
+
Note: It is a typical mistake to forget the FORCE prerequisite.
+ Another common pitfall is that whitespace is sometimes
+ significant; for instance, the below will fail (note the extra space
+ after the comma):
+ target: source(s) FORCE
+ #WRONG!# $(call if_changed, ld/objcopy/gzip)
ld
Link target. Often LDFLAGS_$@ is used to set specific options to ld.
diff --git a/MAINTAINERS b/MAINTAINERS
index 5899ec1..7e1f671 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -933,6 +933,13 @@
W: http://www.kernel.org/pub/linux/utils/net/hdlc/
S: Maintained
+HARDWARE MONITORING
+P: Jean Delvare
+M: khali@linux-fr.org
+L: lm-sensors@lm-sensors.org
+W: http://www.lm-sensors.nu/
+S: Maintained
+
HARMONY SOUND DRIVER
P: Kyle McMartin
M: kyle@parisc-linux.org
@@ -1014,7 +1021,7 @@
M: wli@holomorphy.com
S: Maintained
-I2C AND SENSORS DRIVERS
+I2C SUBSYSTEM
P: Greg Kroah-Hartman
M: greg@kroah.com
P: Jean Delvare
diff --git a/Makefile b/Makefile
index 2d68adb..63e5c9f 100644
--- a/Makefile
+++ b/Makefile
@@ -109,10 +109,9 @@
.PHONY: $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all:
- $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
- KBUILD_SRC=$(CURDIR) KBUILD_VERBOSE=$(KBUILD_VERBOSE) \
- KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)" \
- -f $(CURDIR)/Makefile $@
+ $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+ KBUILD_SRC=$(CURDIR) \
+ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make
skip-makefile := 1
@@ -233,7 +232,7 @@
KBUILD_MODULES := 1
endif
-export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE
+export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
@@ -309,6 +308,9 @@
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
+# We need some generic definitions
+include $(srctree)/scripts/Kbuild.include
+
# For maximum performance (+ possibly random breakage, uncomment
# the following)
@@ -348,7 +350,7 @@
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
-CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \
+CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-ffreestanding
AFLAGS := -D__ASSEMBLY__
@@ -367,11 +369,6 @@
# even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-comma := ,
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
# Files to ignore in find ... statements
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
@@ -551,6 +548,26 @@
# images. Default is /boot, but you can set it to other values
export INSTALL_PATH ?= /boot
+# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests
+# and try to determine if the current source tree is a release tree, of any sort,
+# or if is a pure development tree.
+#
+# A 'release tree' is any tree with a git TAG associated
+# with it. The primary goal of this is to make it safe for a native
+# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to
+# continue developing against the current Linus tree, without having the Linus
+# tree overwrite the 2.6.9 tree when installed.
+#
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
+
+
+ifdef CONFIG_LOCALVERSION_AUTO
+ localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree))
+ LOCALVERSION := $(LOCALVERSION)$(localversion-auto)
+endif
+
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
@@ -691,8 +708,10 @@
# Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld
+ :
+$(call cmd,vmlinux_version)
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
@@ -722,6 +741,16 @@
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+ ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
endif # ifdef CONFIG_KALLSYMS
# vmlinux image - including updated kernel symbols
@@ -757,7 +786,7 @@
prepare2:
ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel'
- $(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \
+ $(Q)if [ -f $(srctree)/.config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
/bin/false; \
@@ -769,7 +798,8 @@
# prepare1 creates a makefile if using a separate output directory
prepare1: prepare2 outputmakefile
-prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER
+prepare0: prepare1 include/linux/version.h include/asm \
+ include/config/MARKER
ifneq ($(KBUILD_MODULES),)
$(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR)
@@ -875,7 +905,7 @@
.PHONY: _modinst_
_modinst_:
- @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
+ @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
@@ -1159,37 +1189,49 @@
__srctree = $(srctree)/
endif
+ALLSOURCE_ARCHS := $(ARCH)
+
define all-sources
( find $(__srctree) $(RCS_FIND_IGNORE) \
\( -name include -o -name arch \) -prune -o \
-name '*.[chS]' -print; \
- find $(__srctree)arch/$(ARCH) $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+ for ARCH in $(ALLSOURCE_ARCHS) ; do \
+ find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
+ -name '*.[chS]' -print; \
+ done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
-o -name '*.[chS]' -print; \
- find $(__srctree)include/asm-$(ARCH) $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+ for ARCH in $(ALLSOURCE_ARCHS) ; do \
+ find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
+ -name '*.[chS]' -print; \
+ done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print )
endef
quiet_cmd_cscope-file = FILELST cscope.files
- cmd_cscope-file = $(all-sources) > cscope.files
+ cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
quiet_cmd_cscope = MAKE cscope.out
- cmd_cscope = cscope -k -b -q
+ cmd_cscope = cscope -b
cscope: FORCE
$(call cmd,cscope-file)
$(call cmd,cscope)
quiet_cmd_TAGS = MAKE $@
-cmd_TAGS = $(all-sources) | etags -
+define cmd_TAGS
+ rm -f $@; \
+ ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
+ $(all-sources) | xargs etags $$ETAGSF -a
+endef
-# Exuberant ctags works better with -I
+TAGS: FORCE
+ $(call cmd,TAGS)
+
quiet_cmd_tags = MAKE $@
define cmd_tags
@@ -1198,9 +1240,6 @@
$(all-sources) | xargs ctags $$CTAGSF -a
endef
-TAGS: FORCE
- $(call cmd,TAGS)
-
tags: FORCE
$(call cmd,tags)
@@ -1268,82 +1307,11 @@
include $(cmd_files)
endif
-# Execute command and generate cmd file
-if_changed = $(if $(strip $? \
- $(filter-out $(cmd_$(1)),$(cmd_$@))\
- $(filter-out $(cmd_$@),$(cmd_$(1)))),\
- @set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
- $(cmd_$(1)); \
- echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
- $(filter-out $(cmd_$(1)),$(cmd_$@))\
- $(filter-out $(cmd_$@),$(cmd_$(1)))),\
- $(Q)set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
- $(cmd_$(1)); \
- scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
- rm -f $(depfile); \
- mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? \
- $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\
- $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\
- $(Q)$(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-# echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-# $(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
- @set -e; \
- echo ' CHK $@'; \
- mkdir -p $(dir $@); \
- $(filechk_$(1)) < $< > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
-# $(call descend,<dir>,<target>)
-# Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make does not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
endif # skip-makefile
FORCE:
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index cfd0d3e..688a595 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -17,6 +17,12 @@
#define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
+/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c
+ There is no easy way to link multiple scoop devices into one
+ single entity for the pxa2xx_pcmcia device */
+int scoop_num;
+struct scoop_pcmcia_dev *scoop_devs;
+
struct scoop_dev {
void *base;
spinlock_t scoop_lock;
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 86b862f..06ea730 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -60,6 +60,15 @@
.io_out = CORGI_SCOOP_IO_OUT,
};
+static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
+{
+ .dev = &corgiscoop_device.dev,
+ .irq = CORGI_IRQ_GPIO_CF_IRQ,
+ .cd_irq = CORGI_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},
+};
+
struct platform_device corgiscoop_device = {
.name = "sharp-scoop",
.id = -1,
@@ -241,6 +250,9 @@
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
+ scoop_num = 1;
+ scoop_devs = &corgi_pcmcia_scoop[0];
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 0e4f6fa..47cfb8b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -62,6 +62,15 @@
.resource = poodle_scoop_resources,
};
+static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
+{
+ .dev = &poodle_scoop_device.dev,
+ .irq = POODLE_IRQ_GPIO_CF_IRQ,
+ .cd_irq = POODLE_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},
+};
+
/* LoCoMo device */
static struct resource locomo_resources[] = {
@@ -147,6 +156,9 @@
set_pxa_fb_info(&poodle_fb_info);
+ scoop_num = 1;
+ scoop_devs = &poodle_pcmcia_scoop[0];
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 79044d9..66bf5bb 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -110,34 +110,24 @@
s3c24xx_init_irq();
}
-
-static int n30_usbstart_thread(void *unused)
-{
- /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
- writel(readl(S3C2410_MISCCR) & ~0x00003008, S3C2410_MISCCR);
-
- /* Turn off the D+ pull up for 3 seconds so that the USB host
- * at the other end will do a rescan of the USB bus. */
- s3c2410_gpio_setpin(S3C2410_GPB3, 0);
-
- msleep_interruptible(3*HZ);
-
- s3c2410_gpio_setpin(S3C2410_GPB3, 1);
-
- return 0;
-}
-
+/* GPB3 is the line that controls the pull-up for the USB D+ line */
void __init n30_init(void)
{
s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
- kthread_run(n30_usbstart_thread, NULL, "n30_usbstart");
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
}
MACHINE_START(N30, "Acer-N30")
- /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */
+ /* Maintainer: Christer Weinigel <christer@weinigel.se>,
+ Ben Dooks <ben-linux@fluff.org>
+ */
.phys_ram = S3C2410_SDRAM_PA,
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index 97022ed..7ce5e55 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -114,7 +114,7 @@
prepare: include/asm-$(ARCH)/asm-offsets.h
archclean:
- $(call descend arch/$(ARCH)/boot, subdirclean)
+ $(Q)$(MAKE) $(clean)=arch/m68knommu/boot
include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
include/asm include/linux/version.h \
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d27b825..b0fdaee 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -673,7 +673,7 @@
ifdef CONFIG_LASAT
rom.bin rom.sw: vmlinux
- $(call descend,arch/mips/lasat/image,$@)
+ $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
endif
#
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 17846f4..73ec6ae 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -178,8 +178,6 @@
endmenu
-source "drivers/firmware/Kconfig"
-
source "mm/Kconfig"
config GENERIC_ISA_DMA
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index ab53832..17e9669 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -156,7 +156,9 @@
device_release_driver(dev);
err = count;
}
- return err;
+ if (err)
+ return err;
+ return count;
}
static DRIVER_ATTR(unbind, S_IWUSR, NULL, driver_unbind);
@@ -358,7 +360,7 @@
if (bus) {
pr_debug("bus %s: add device %s\n", bus->name, dev->bus_id);
device_attach(dev);
- klist_add_tail(&bus->klist_devices, &dev->knode_bus);
+ klist_add_tail(&dev->knode_bus, &bus->klist_devices);
error = device_add_attrs(bus, dev);
if (!error) {
sysfs_create_link(&bus->devices.kobj, &dev->kobj, dev->bus_id);
@@ -446,7 +448,7 @@
}
driver_attach(drv);
- klist_add_tail(&bus->klist_drivers, &drv->knode_bus);
+ klist_add_tail(&drv->knode_bus, &bus->klist_drivers);
module_add_driver(drv->owner, drv);
driver_add_attrs(bus, drv);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 0154a16..d164c32 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -299,10 +299,8 @@
pr_debug("device class '%s': release.\n", cd->class_id);
- if (cd->devt_attr) {
- kfree(cd->devt_attr);
- cd->devt_attr = NULL;
- }
+ kfree(cd->devt_attr);
+ cd->devt_attr = NULL;
if (cls->release)
cls->release(cd);
@@ -452,10 +450,29 @@
INIT_LIST_HEAD(&class_dev->node);
}
+static char *make_class_name(struct class_device *class_dev)
+{
+ char *name;
+ int size;
+
+ size = strlen(class_dev->class->name) +
+ strlen(kobject_name(&class_dev->kobj)) + 2;
+
+ name = kmalloc(size, GFP_KERNEL);
+ if (!name)
+ return ERR_PTR(-ENOMEM);
+
+ strcpy(name, class_dev->class->name);
+ strcat(name, ":");
+ strcat(name, kobject_name(&class_dev->kobj));
+ return name;
+}
+
int class_device_add(struct class_device *class_dev)
{
struct class * parent = NULL;
struct class_interface * class_intf;
+ char *class_name = NULL;
int error;
class_dev = class_device_get(class_dev);
@@ -500,9 +517,13 @@
}
class_device_add_attrs(class_dev);
- if (class_dev->dev)
+ if (class_dev->dev) {
+ class_name = make_class_name(class_dev);
sysfs_create_link(&class_dev->kobj,
&class_dev->dev->kobj, "device");
+ sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj,
+ class_name);
+ }
/* notify any interfaces this device is now here */
if (parent) {
@@ -519,6 +540,7 @@
if (error && parent)
class_put(parent);
class_device_put(class_dev);
+ kfree(class_name);
return error;
}
@@ -584,6 +606,7 @@
{
struct class * parent = class_dev->class;
struct class_interface * class_intf;
+ char *class_name = NULL;
if (parent) {
down(&parent->sem);
@@ -594,8 +617,11 @@
up(&parent->sem);
}
- if (class_dev->dev)
+ if (class_dev->dev) {
+ class_name = make_class_name(class_dev);
sysfs_remove_link(&class_dev->kobj, "device");
+ sysfs_remove_link(&class_dev->dev->kobj, class_name);
+ }
if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
class_device_remove_attrs(class_dev);
@@ -605,6 +631,7 @@
if (parent)
class_put(parent);
+ kfree(class_name);
}
void class_device_unregister(struct class_device *class_dev)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index efe03a0..c8a33df 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -249,7 +249,7 @@
if ((error = bus_add_device(dev)))
goto BusError;
if (parent)
- klist_add_tail(&parent->klist_children, &dev->knode_parent);
+ klist_add_tail(&dev->knode_parent, &parent->klist_children);
/* notify platform of device entry */
if (platform_notify)
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 16323f9..d5bbce3 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -42,7 +42,7 @@
{
pr_debug("bound device '%s' to driver '%s'\n",
dev->bus_id, dev->driver->name);
- klist_add_tail(&dev->driver->klist_devices, &dev->knode_driver);
+ klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices);
sysfs_create_link(&dev->driver->kobj, &dev->kobj,
kobject_name(&dev->kobj));
sysfs_create_link(&dev->kobj, &dev->driver->kobj, "driver");
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 214b964..3431eb6 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -288,6 +288,27 @@
up(&sysdev_drivers_lock);
}
+static void __sysdev_resume(struct sys_device *dev)
+{
+ struct sysdev_class *cls = dev->cls;
+ struct sysdev_driver *drv;
+
+ /* First, call the class-specific one */
+ if (cls->resume)
+ cls->resume(dev);
+
+ /* Call auxillary drivers next. */
+ list_for_each_entry(drv, &cls->drivers, entry) {
+ if (drv->resume)
+ drv->resume(dev);
+ }
+
+ /* Call global drivers. */
+ list_for_each_entry(drv, &sysdev_drivers, entry) {
+ if (drv->resume)
+ drv->resume(dev);
+ }
+}
/**
* sysdev_suspend - Suspend all system devices.
@@ -305,38 +326,93 @@
int sysdev_suspend(pm_message_t state)
{
struct sysdev_class * cls;
+ struct sys_device *sysdev, *err_dev;
+ struct sysdev_driver *drv, *err_drv;
+ int ret;
pr_debug("Suspending System Devices\n");
list_for_each_entry_reverse(cls, &system_subsys.kset.list,
kset.kobj.entry) {
- struct sys_device * sysdev;
pr_debug("Suspending type '%s':\n",
kobject_name(&cls->kset.kobj));
list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
- struct sysdev_driver * drv;
pr_debug(" %s\n", kobject_name(&sysdev->kobj));
/* Call global drivers first. */
list_for_each_entry(drv, &sysdev_drivers, entry) {
- if (drv->suspend)
- drv->suspend(sysdev, state);
+ if (drv->suspend) {
+ ret = drv->suspend(sysdev, state);
+ if (ret)
+ goto gbl_driver;
+ }
}
/* Call auxillary drivers next. */
list_for_each_entry(drv, &cls->drivers, entry) {
- if (drv->suspend)
- drv->suspend(sysdev, state);
+ if (drv->suspend) {
+ ret = drv->suspend(sysdev, state);
+ if (ret)
+ goto aux_driver;
+ }
}
/* Now call the generic one */
- if (cls->suspend)
- cls->suspend(sysdev, state);
+ if (cls->suspend) {
+ ret = cls->suspend(sysdev, state);
+ if (ret)
+ goto cls_driver;
+ }
}
}
return 0;
+ /* resume current sysdev */
+cls_driver:
+ drv = NULL;
+ printk(KERN_ERR "Class suspend failed for %s\n",
+ kobject_name(&sysdev->kobj));
+
+aux_driver:
+ if (drv)
+ printk(KERN_ERR "Class driver suspend failed for %s\n",
+ kobject_name(&sysdev->kobj));
+ list_for_each_entry(err_drv, &cls->drivers, entry) {
+ if (err_drv == drv)
+ break;
+ if (err_drv->resume)
+ err_drv->resume(sysdev);
+ }
+ drv = NULL;
+
+gbl_driver:
+ if (drv)
+ printk(KERN_ERR "sysdev driver suspend failed for %s\n",
+ kobject_name(&sysdev->kobj));
+ list_for_each_entry(err_drv, &sysdev_drivers, entry) {
+ if (err_drv == drv)
+ break;
+ if (err_drv->resume)
+ err_drv->resume(sysdev);
+ }
+ /* resume other sysdevs in current class */
+ list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) {
+ if (err_dev == sysdev)
+ break;
+ pr_debug(" %s\n", kobject_name(&err_dev->kobj));
+ __sysdev_resume(err_dev);
+ }
+
+ /* resume other classes */
+ list_for_each_entry_continue(cls, &system_subsys.kset.list,
+ kset.kobj.entry) {
+ list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) {
+ pr_debug(" %s\n", kobject_name(&err_dev->kobj));
+ __sysdev_resume(err_dev);
+ }
+ }
+ return ret;
}
@@ -362,25 +438,9 @@
kobject_name(&cls->kset.kobj));
list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
- struct sysdev_driver * drv;
pr_debug(" %s\n", kobject_name(&sysdev->kobj));
- /* First, call the class-specific one */
- if (cls->resume)
- cls->resume(sysdev);
-
- /* Call auxillary drivers next. */
- list_for_each_entry(drv, &cls->drivers, entry) {
- if (drv->resume)
- drv->resume(sysdev);
- }
-
- /* Call global drivers. */
- list_for_each_entry(drv, &sysdev_drivers, entry) {
- if (drv->resume)
- drv->resume(sysdev);
- }
-
+ __sysdev_resume(sysdev);
}
}
return 0;
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 879036d..6b73636 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -408,48 +408,6 @@
"real" root file system, etc. See <file:Documentation/initrd.txt>
for details.
-config INITRAMFS_SOURCE
- string "Initramfs source file(s)"
- default ""
- help
- This can be either a single cpio archive with a .cpio suffix or a
- space-separated list of directories and files for building the
- initramfs image. A cpio archive should contain a filesystem archive
- to be used as an initramfs image. Directories should contain a
- filesystem layout to be included in the initramfs image. Files
- should contain entries according to the format described by the
- "usr/gen_init_cpio" program in the kernel tree.
-
- When multiple directories and files are specified then the
- initramfs image will be the aggregate of all of them.
-
- See <file:Documentation/early-userspace/README for more details.
-
- If you are not sure, leave it blank.
-
-config INITRAMFS_ROOT_UID
- int "User ID to map to 0 (user root)"
- depends on INITRAMFS_SOURCE!=""
- default "0"
- help
- This setting is only meaningful if the INITRAMFS_SOURCE is
- contains a directory. Setting this user ID (UID) to something
- other than "0" will cause all files owned by that UID to be
- owned by user root in the initial ramdisk image.
-
- If you are not sure, leave it set to "0".
-
-config INITRAMFS_ROOT_GID
- int "Group ID to map to 0 (group root)"
- depends on INITRAMFS_SOURCE!=""
- default "0"
- help
- This setting is only meaningful if the INITRAMFS_SOURCE is
- contains a directory. Setting this group ID (GID) to something
- other than "0" will cause all files owned by that GID to be
- owned by group root in the initial ramdisk image.
-
- If you are not sure, leave it set to "0".
#XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64
#for instance.
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index f0c1084..888dad5 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -493,6 +493,8 @@
static sector_t floppy_sizes[256];
+static char floppy_device_name[] = "floppy";
+
/*
* The driver is trying to determine the correct media format
* while probing is set. rw_interrupt() clears it after a
@@ -4191,18 +4193,24 @@
static int have_no_fdc = -ENODEV;
+static ssize_t floppy_cmos_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *p;
+ int drive;
+
+ p = container_of(dev, struct platform_device,dev);
+ drive = p->id;
+ return sprintf(buf, "%X\n", UDP->cmos);
+}
+DEVICE_ATTR(cmos,S_IRUGO,floppy_cmos_show,NULL);
+
static void floppy_device_release(struct device *dev)
{
complete(&device_release);
}
-static struct platform_device floppy_device = {
- .name = "floppy",
- .id = 0,
- .dev = {
- .release = floppy_device_release,
- }
-};
+static struct platform_device floppy_device[N_DRIVE];
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
{
@@ -4370,20 +4378,26 @@
goto out_flush_work;
}
- err = platform_device_register(&floppy_device);
- if (err)
- goto out_flush_work;
-
for (drive = 0; drive < N_DRIVE; drive++) {
if (!(allowed_drive_mask & (1 << drive)))
continue;
if (fdc_state[FDC(drive)].version == FDC_NONE)
continue;
+
+ floppy_device[drive].name = floppy_device_name;
+ floppy_device[drive].id = drive;
+ floppy_device[drive].dev.release = floppy_device_release;
+
+ err = platform_device_register(&floppy_device[drive]);
+ if (err)
+ goto out_flush_work;
+
+ device_create_file(&floppy_device[drive].dev,&dev_attr_cmos);
/* to be cleaned up... */
disks[drive]->private_data = (void *)(long)drive;
disks[drive]->queue = floppy_queue;
disks[drive]->flags |= GENHD_FL_REMOVABLE;
- disks[drive]->driverfs_dev = &floppy_device.dev;
+ disks[drive]->driverfs_dev = &floppy_device[drive].dev;
add_disk(disks[drive]);
}
@@ -4603,10 +4617,11 @@
fdc_state[FDC(drive)].version != FDC_NONE) {
del_gendisk(disks[drive]);
unregister_devfs_entries(drive);
+ device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
+ platform_device_unregister(&floppy_device[drive]);
}
put_disk(disks[drive]);
}
- platform_device_unregister(&floppy_device);
devfs_remove("floppy");
del_timer_sync(&fd_timeout);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index df5f2b0..a1de06d 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -175,7 +175,7 @@
config MOXA_SMARTIO
tristate "Moxa SmartIO support"
- depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32)
+ depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa SmartIO multiport serial card.
@@ -735,7 +735,7 @@
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32
+ depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32 && !SPARC64
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index f022f09..d0ef1ae 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -63,7 +63,6 @@
#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/segment.h>
#include <asm/bitops.h>
#include <asm/uaccess.h>
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index cd4fe8b..63fff7c 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -938,10 +938,9 @@
/*
* XXX Interrupt pin #7 in Espresso is shared between RTC and
- * PCI Slot 2 INTA# (and some INTx# in Slot 1). SA_INTERRUPT here
- * is asking for trouble with add-on boards. Change to SA_SHIRQ.
+ * PCI Slot 2 INTA# (and some INTx# in Slot 1).
*/
- if (request_irq(rtc_irq, rtc_interrupt, SA_INTERRUPT, "rtc", (void *)&rtc_port)) {
+ if (request_irq(rtc_irq, rtc_interrupt, SA_SHIRQ, "rtc", (void *)&rtc_port)) {
/*
* Standard way for sparc to print irq's is to use
* __irq_itoa(). I think for EBus it's ok to use %d.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 140d5f8..138dc50 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -12,12 +12,20 @@
of a system. Most modern motherboards include such a device. It
can include temperature sensors, voltage sensors, fan speed
sensors and various additional features such as the ability to
- control the speed of the fans.
+ control the speed of the fans. If you want this support you
+ should say Y here and also to the specific driver(s) for your
+ sensors chip(s) below.
+
+ This support can also be built as a module. If so, the module
+ will be called hwmon.
+
+config HWMON_VID
+ tristate
+ default n
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on HWMON && I2C
- select I2C_SENSOR
help
If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
@@ -30,7 +38,7 @@
config SENSORS_ADM1025
tristate "Analog Devices ADM1025 and compatibles"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM1025
and Philips NE1619 sensor chips.
@@ -41,7 +49,7 @@
config SENSORS_ADM1026
tristate "Analog Devices ADM1026 and compatibles"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM1026
sensor chip.
@@ -52,7 +60,6 @@
config SENSORS_ADM1031
tristate "Analog Devices ADM1031 and compatibles"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.
@@ -63,7 +70,7 @@
config SENSORS_ADM9240
tristate "Analog Devices ADM9240 and compatibles"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM9240,
Dallas DS1780, National Semiconductor LM81 sensor chips.
@@ -74,7 +81,7 @@
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select HWMON_VID
help
If you say yes here you get support for the ASB100 Bach sensor
chip found on some Asus mainboards.
@@ -85,7 +92,7 @@
config SENSORS_ATXP1
tristate "Attansic ATXP1 VID controller"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select HWMON_VID
help
If you say yes here you get support for the Attansic ATXP1 VID
controller.
@@ -99,7 +106,6 @@
config SENSORS_DS1621
tristate "Dallas Semiconductor DS1621 and DS1625"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for Dallas Semiconductor
DS1621 and DS1625 sensor chips.
@@ -110,7 +116,6 @@
config SENSORS_FSCHER
tristate "FSC Hermes"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for Fujitsu Siemens
Computers Hermes sensor chips.
@@ -121,7 +126,6 @@
config SENSORS_FSCPOS
tristate "FSC Poseidon"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for Fujitsu Siemens
Computers Poseidon sensor chips.
@@ -132,7 +136,6 @@
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
depends on HWMON && I2C
- select I2C_SENSOR
help
If you say yes here you get support for Genesys Logic GL518SM
sensor chips.
@@ -143,7 +146,7 @@
config SENSORS_GL520SM
tristate "Genesys Logic GL520SM"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select HWMON_VID
help
If you say yes here you get support for Genesys Logic GL520SM
sensor chips.
@@ -154,7 +157,8 @@
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
depends on HWMON && I2C
- select I2C_SENSOR
+ select I2C_ISA
+ select HWMON_VID
help
If you say yes here you get support for ITE IT87xx sensor chips
and clones: SiS960.
@@ -165,7 +169,6 @@
config SENSORS_LM63
tristate "National Semiconductor LM63"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for the National Semiconductor
LM63 remote diode digital temperature sensor with integrated fan
@@ -178,7 +181,6 @@
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
depends on HWMON && I2C
- select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM75
sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
@@ -194,7 +196,6 @@
config SENSORS_LM77
tristate "National Semiconductor LM77"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM77
sensor chips.
@@ -205,7 +206,8 @@
config SENSORS_LM78
tristate "National Semiconductor LM78 and compatibles"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select I2C_ISA
+ select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM78,
LM78-J and LM79.
@@ -216,7 +218,6 @@
config SENSORS_LM80
tristate "National Semiconductor LM80"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor
LM80 sensor chips.
@@ -227,7 +228,6 @@
config SENSORS_LM83
tristate "National Semiconductor LM83"
depends on HWMON && I2C
- select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor
LM83 sensor chips.
@@ -238,7 +238,7 @@
config SENSORS_LM85
tristate "National Semiconductor LM85 and compatibles"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM85
sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
@@ -249,7 +249,7 @@
config SENSORS_LM87
tristate "National Semiconductor LM87"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM87
sensor chips.
@@ -260,7 +260,6 @@
config SENSORS_LM90
tristate "National Semiconductor LM90 and compatibles"
depends on HWMON && I2C
- select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM90,
LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
@@ -275,7 +274,6 @@
config SENSORS_LM92
tristate "National Semiconductor LM92 and compatibles"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM92
and Maxim MAX6635 sensor chips.
@@ -286,7 +284,6 @@
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for MAX1619 sensor chip.
@@ -296,8 +293,8 @@
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
select I2C_ISA
+ select HWMON_VID
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC8736x Super-I/O chips.
@@ -311,7 +308,6 @@
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on HWMON && I2C && PCI && EXPERIMENTAL
- select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the integrated sensors in
@@ -323,7 +319,6 @@
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the integrated fan
@@ -336,7 +331,6 @@
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the SMSC LPC47B397-NC
@@ -348,7 +342,6 @@
config SENSORS_VIA686A
tristate "VIA686A"
depends on HWMON && I2C && PCI
- select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the integrated sensors in
@@ -360,7 +353,8 @@
config SENSORS_W83781D
tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
depends on HWMON && I2C
- select I2C_SENSOR
+ select I2C_ISA
+ select HWMON_VID
help
If you say yes here you get support for the Winbond W8378x series
of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
@@ -369,10 +363,18 @@
This driver can also be built as a module. If so, the module
will be called w83781d.
+config SENSORS_W83792D
+ tristate "Winbond W83792D"
+ depends on HWMON && I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83792D chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83792d.
+
config SENSORS_W83L785TS
tristate "Winbond W83L785TS-S"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for the Winbond W83L785TS-S
sensor chip, which is used on the Asus A7N8X, among other
@@ -384,8 +386,8 @@
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
select I2C_ISA
+ select HWMON_VID
help
If you say yes here you get support for the Winbond W836X7 series
of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
@@ -396,7 +398,6 @@
config SENSORS_W83627EHF
tristate "Winbond W83627EHF"
depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get preliminary support for the hardware
@@ -404,6 +405,9 @@
Only fan and temperature inputs are supported at the moment, while
the chip does much more than that.
+ This driver also supports the W83627EHG, which is the lead-free
+ version of the W83627EHF.
+
This driver can also be built as a module. If so, the module
will be called w83627ehf.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 2781403..381f1bf 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -2,9 +2,13 @@
# Makefile for sensor chip drivers.
#
+obj-$(CONFIG_HWMON) += hwmon.o
+obj-$(CONFIG_HWMON_VID) += hwmon-vid.o
+
# asb100, then w83781d go first, as they can override other drivers' addresses.
obj-$(CONFIG_SENSORS_ASB100) += asb100.o
obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
+obj-$(CONFIG_SENSORS_W83792D) += w83792d.o
obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index d2c774c..e928cdb 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -24,7 +24,8 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/* Addresses to scan */
@@ -32,10 +33,9 @@
0x29, 0x2a, 0x2b,
0x4c, 0x4d, 0x4e,
I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066);
+I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066);
/* adm1021 constants specified below */
@@ -89,6 +89,7 @@
/* Each client has this additional data */
struct adm1021_data {
struct i2c_client client;
+ struct class_device *class_dev;
enum chips type;
struct semaphore update_lock;
@@ -185,7 +186,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, adm1021_detect);
+ return i2c_probe(adapter, &addr_data, adm1021_detect);
}
static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
@@ -196,15 +197,6 @@
int err = 0;
const char *type_name = "";
- /* Make sure we aren't probing the ISA bus!! This is just a safety check
- at this moment; i2c_detect really won't call us. */
-#ifdef DEBUG
- if (i2c_is_isa_adapter(adapter)) {
- dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n");
- return 0;
- }
-#endif
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto error0;
@@ -295,6 +287,12 @@
adm1021_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto error2;
+ }
+
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp1_min);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
@@ -305,6 +303,8 @@
return 0;
+error2:
+ i2c_detach_client(new_client);
error1:
kfree(data);
error0:
@@ -322,14 +322,15 @@
static int adm1021_detach_client(struct i2c_client *client)
{
+ struct adm1021_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index e452d0d..526b7ff 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -50,8 +50,9 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
/*
* Addresses to scan
@@ -60,13 +61,12 @@
*/
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_2(adm1025, ne1619);
+I2C_CLIENT_INSMOD_2(adm1025, ne1619);
/*
* The ADM1025 registers
@@ -132,6 +132,7 @@
struct adm1025_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -312,7 +313,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, adm1025_detect);
+ return i2c_probe(adapter, &addr_data, adm1025_detect);
}
/*
@@ -416,6 +417,12 @@
adm1025_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
@@ -452,6 +459,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -464,7 +473,7 @@
struct adm1025_data *data = i2c_get_clientdata(client);
int i;
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
/*
* Set high limits
@@ -502,15 +511,15 @@
static int adm1025_detach_client(struct i2c_client *client)
{
+ struct adm1025_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index c8a7f47..6251581 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -28,16 +28,16 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(adm1026);
+I2C_CLIENT_INSMOD_1(adm1026);
static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
@@ -259,6 +259,7 @@
struct adm1026_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
enum chips type;
@@ -319,13 +320,15 @@
if (!(adapter->class & I2C_CLASS_HWMON)) {
return 0;
}
- return i2c_detect(adapter, &addr_data, adm1026_detect);
+ return i2c_probe(adapter, &addr_data, adm1026_detect);
}
int adm1026_detach_client(struct i2c_client *client)
{
+ struct adm1026_data *data = i2c_get_clientdata(client);
+ hwmon_device_unregister(data->class_dev);
i2c_detach_client(client);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -1549,12 +1552,18 @@
goto exitfree;
/* Set the VRM version */
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
/* Initialize the ADM1026 chip */
adm1026_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exitdetach;
+ }
+
device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr);
device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr);
device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr);
@@ -1690,6 +1699,8 @@
return 0;
/* Error out and cleanup code */
+exitdetach:
+ i2c_detach_client(new_client);
exitfree:
kfree(data);
exit:
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 9362509..58338ed 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -26,7 +26,8 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/* Following macros takes channel parameter starting from 0 to 2 */
#define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr))
@@ -59,16 +60,16 @@
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_2(adm1030, adm1031);
+I2C_CLIENT_INSMOD_2(adm1030, adm1031);
typedef u8 auto_chan_table_t[8][2];
/* Each client has this additional data */
struct adm1031_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
int chip_type;
char valid; /* !=0 if following fields are valid */
@@ -725,10 +726,10 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, adm1031_detect);
+ return i2c_probe(adapter, &addr_data, adm1031_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
@@ -788,6 +789,12 @@
adm1031_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan1_div);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
@@ -833,6 +840,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -841,11 +850,14 @@
static int adm1031_detach_client(struct i2c_client *client)
{
+ struct adm1031_data *data = i2c_get_clientdata(client);
int ret;
+
+ hwmon_device_unregister(data->class_dev);
if ((ret = i2c_detach_client(client)) != 0) {
return ret;
}
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index ce2a6eb..bc7faef 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -45,17 +45,16 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
-
/* Insmod parameters */
-SENSORS_INSMOD_3(adm9240, ds1780, lm81);
+I2C_CLIENT_INSMOD_3(adm9240, ds1780, lm81);
/* ADM9240 registers */
#define ADM9240_REG_MAN_ID 0x3e
@@ -150,6 +149,7 @@
struct adm9240_data {
enum chips type;
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid;
unsigned long last_updated_measure;
@@ -582,6 +582,12 @@
adm9240_init_client(new_client);
/* populate sysfs filesystem */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
@@ -615,6 +621,9 @@
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
return 0;
+
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -625,20 +634,20 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, adm9240_detect);
+ return i2c_probe(adapter, &addr_data, adm9240_detect);
}
static int adm9240_detach_client(struct i2c_client *client)
{
+ struct adm9240_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
@@ -648,7 +657,7 @@
u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG);
u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3;
- data->vrm = i2c_which_vrm(); /* need this to report vid as mV */
+ data->vrm = vid_which_vrm(); /* need this to report vid as mV */
dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10,
data->vrm % 10);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 70d996d..8e34855 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -39,8 +39,9 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include "lm75.h"
@@ -54,11 +55,8 @@
/* I2C addresses to scan */
static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
-/* ISA addresses to scan (none) */
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
-
/* Insmod parameters */
-SENSORS_INSMOD_1(asb100);
+I2C_CLIENT_INSMOD_1(asb100);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
@@ -183,6 +181,7 @@
dynamically allocated, at the same time the client itself is allocated. */
struct asb100_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
enum chips type;
@@ -621,7 +620,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, asb100_detect);
+ return i2c_probe(adapter, &addr_data, asb100_detect);
}
static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
@@ -714,14 +713,6 @@
struct i2c_client *new_client;
struct asb100_data *data;
- /* asb100 is SMBus only */
- if (i2c_is_isa_adapter(adapter)) {
- pr_debug("asb100.o: detect failed, "
- "cannot attach to legacy adapter!\n");
- err = -ENODEV;
- goto ERROR0;
- }
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("asb100.o: detect failed, "
"smbus byte data not supported!\n");
@@ -821,6 +812,12 @@
data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2));
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR3;
+ }
+
device_create_file_in(new_client, 0);
device_create_file_in(new_client, 1);
device_create_file_in(new_client, 2);
@@ -847,6 +844,11 @@
return 0;
+ERROR3:
+ i2c_detach_client(data->lm75[1]);
+ i2c_detach_client(data->lm75[0]);
+ kfree(data->lm75[1]);
+ kfree(data->lm75[0]);
ERROR2:
i2c_detach_client(new_client);
ERROR1:
@@ -857,21 +859,23 @@
static int asb100_detach_client(struct i2c_client *client)
{
+ struct asb100_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "client deregistration failed; "
- "client not detached.\n");
- return err;
- }
+ /* main client */
+ if (data)
+ hwmon_device_unregister(data->class_dev);
- if (i2c_get_clientdata(client)==NULL) {
- /* subclients */
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ /* main client */
+ if (data)
+ kfree(data);
+
+ /* subclient */
+ else
kfree(client);
- } else {
- /* main client */
- kfree(i2c_get_clientdata(client));
- }
return 0;
}
@@ -969,7 +973,7 @@
vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
vid = vid_from_reg(vid, data->vrm);
/* Start monitoring */
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index fca3fc1..deb4d34 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -23,8 +23,9 @@
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
@@ -40,9 +41,8 @@
#define ATXP1_GPIO1MASK 0x0f
static unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
-SENSORS_INSMOD_1(atxp1);
+I2C_CLIENT_INSMOD_1(atxp1);
static int atxp1_attach_adapter(struct i2c_adapter * adapter);
static int atxp1_detach_client(struct i2c_client * client);
@@ -59,6 +59,7 @@
struct atxp1_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
unsigned long last_updated;
u8 valid;
@@ -252,7 +253,7 @@
static int atxp1_attach_adapter(struct i2c_adapter *adapter)
{
- return i2c_detect(adapter, &addr_data, &atxp1_detect);
+ return i2c_probe(adapter, &addr_data, &atxp1_detect);
};
static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
@@ -295,7 +296,7 @@
}
/* Get VRM */
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
if ((data->vrm != 90) && (data->vrm != 91)) {
dev_err(&new_client->dev, "Not supporting VRM %d.%d\n",
@@ -317,6 +318,12 @@
goto exit_free;
}
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_gpio1);
device_create_file(&new_client->dev, &dev_attr_gpio2);
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
@@ -326,6 +333,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -334,14 +343,17 @@
static int atxp1_detach_client(struct i2c_client * client)
{
+ struct atxp1_data * data = i2c_get_clientdata(client);
int err;
+ hwmon_device_unregister(data->class_dev);
+
err = i2c_detach_client(client);
if (err)
dev_err(&client->dev, "Failed to detach client.\n");
else
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return err;
};
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 5360d58..b0199e0 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -26,16 +26,16 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
#include "lm75.h"
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(ds1621);
+I2C_CLIENT_INSMOD_1(ds1621);
static int polarity = -1;
module_param(polarity, int, 0);
MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
@@ -71,6 +71,7 @@
/* Each client has this additional data */
struct ds1621_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -179,10 +180,10 @@
static int ds1621_attach_adapter(struct i2c_adapter *adapter)
{
- return i2c_detect(adapter, &addr_data, ds1621_detect);
+ return i2c_probe(adapter, &addr_data, ds1621_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
int ds1621_detect(struct i2c_adapter *adapter, int address,
int kind)
{
@@ -250,6 +251,12 @@
ds1621_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_alarms);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_min);
@@ -259,6 +266,8 @@
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
+ exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -267,15 +276,15 @@
static int ds1621_detach_client(struct i2c_client *client)
{
+ struct ds1621_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index da41174..eef6061 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -31,20 +31,20 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/*
* Addresses to scan
*/
static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(fscher);
+I2C_CLIENT_INSMOD_1(fscher);
/*
* The FSCHER registers
@@ -132,6 +132,7 @@
struct fscher_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -287,7 +288,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, fscher_detect);
+ return i2c_probe(adapter, &addr_data, fscher_detect);
}
static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
@@ -341,6 +342,12 @@
fscher_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file_revision(new_client);
device_create_file_alarms(new_client);
device_create_file_control(new_client);
@@ -360,6 +367,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -368,15 +377,15 @@
static int fscher_detach_client(struct i2c_client *client)
{
+ struct fscher_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 301ae98..5fc77a5f 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -34,19 +34,19 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/*
* Addresses to scan
*/
static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(fscpos);
+I2C_CLIENT_INSMOD_1(fscpos);
/*
* The FSCPOS registers
@@ -113,6 +113,7 @@
*/
struct fscpos_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* 0 until following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -434,7 +435,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, fscpos_detect);
+ return i2c_probe(adapter, &addr_data, fscpos_detect);
}
int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
@@ -496,6 +497,12 @@
dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_event);
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
@@ -526,6 +533,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -534,14 +543,14 @@
static int fscpos_detach_client(struct i2c_client *client)
{
+ struct fscpos_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, client"
- " not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 6bedf72..256b932 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -41,14 +41,14 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80);
+I2C_CLIENT_INSMOD_2(gl518sm_r00, gl518sm_r80);
/* Many GL518 constants specified below */
@@ -117,6 +117,7 @@
/* Each client has this additional data */
struct gl518_data {
struct i2c_client client;
+ struct class_device *class_dev;
enum chips type;
struct semaphore update_lock;
@@ -346,7 +347,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, gl518_detect);
+ return i2c_probe(adapter, &addr_data, gl518_detect);
}
static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
@@ -419,6 +420,12 @@
gl518_init_client((struct i2c_client *) new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
@@ -450,6 +457,8 @@
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -477,16 +486,15 @@
static int gl518_detach_client(struct i2c_client *client)
{
+ struct gl518_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
- kfree(i2c_get_clientdata(client));
-
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 80ae8d3..12fd757 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -26,8 +26,9 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
/* Type of the extra sensor */
static unsigned short extra_sensor_type;
@@ -36,10 +37,9 @@
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(gl520sm);
+I2C_CLIENT_INSMOD_1(gl520sm);
/* Many GL520 constants specified below
One of the inputs can be configured as either temp or voltage.
@@ -120,6 +120,7 @@
/* Client data */
struct gl520_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until the following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -518,7 +519,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, gl520_detect);
+ return i2c_probe(adapter, &addr_data, gl520_detect);
}
static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
@@ -571,6 +572,12 @@
gl520_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file_vid(new_client, 0);
device_create_file_in(new_client, 0);
@@ -592,6 +599,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -608,7 +617,7 @@
conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
data->alarm_mask = 0xff;
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
if (extra_sensor_type == 1)
conf &= ~0x10;
@@ -639,15 +648,15 @@
static int gl520_detach_client(struct i2c_client *client)
{
+ struct gl520_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
new file mode 100644
index 0000000..312769a
--- /dev/null
+++ b/drivers/hwmon/hwmon-vid.c
@@ -0,0 +1,189 @@
+/*
+ hwmon-vid.c - VID/VRM/VRD voltage conversions
+
+ Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
+
+ Partly imported from i2c-vid.h of the lm_sensors project
+ Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ With assistance from Trent Piepho <xyzzy@speakeasy.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/hwmon-vid.h>
+
+/*
+ Common code for decoding VID pins.
+
+ References:
+
+ For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
+ available at http://developer.intel.com/.
+
+ For VRD 10.0 and up, "VRD x.y Design Guide",
+ available at http://developer.intel.com/.
+
+ AMD Opteron processors don't follow the Intel specifications.
+ I'm going to "make up" 2.4 as the spec number for the Opterons.
+ No good reason just a mnemonic for the 24x Opteron processor
+ series.
+
+ Opteron VID encoding is:
+ 00000 = 1.550 V
+ 00001 = 1.525 V
+ . . . .
+ 11110 = 0.800 V
+ 11111 = 0.000 V (off)
+*/
+
+/* vrm is the VRM/VRD document version multiplied by 10.
+ val is the 4-, 5- or 6-bit VID code.
+ Returned value is in mV to avoid floating point in the kernel. */
+int vid_from_reg(int val, int vrm)
+{
+ int vid;
+
+ switch(vrm) {
+
+ case 0:
+ return 0;
+
+ case 100: /* VRD 10.0 */
+ if((val & 0x1f) == 0x1f)
+ return 0;
+ if((val & 0x1f) <= 0x09 || val == 0x0a)
+ vid = 10875 - (val & 0x1f) * 250;
+ else
+ vid = 18625 - (val & 0x1f) * 250;
+ if(val & 0x20)
+ vid -= 125;
+ vid /= 10; /* only return 3 dec. places for now */
+ return vid;
+
+ case 24: /* Opteron processor */
+ return(val == 0x1f ? 0 : 1550 - val * 25);
+
+ case 91: /* VRM 9.1 */
+ case 90: /* VRM 9.0 */
+ return(val == 0x1f ? 0 :
+ 1850 - val * 25);
+
+ case 85: /* VRM 8.5 */
+ return((val & 0x10 ? 25 : 0) +
+ ((val & 0x0f) > 0x04 ? 2050 : 1250) -
+ ((val & 0x0f) * 50));
+
+ case 84: /* VRM 8.4 */
+ val &= 0x0f;
+ /* fall through */
+ default: /* VRM 8.2 */
+ return(val == 0x1f ? 0 :
+ val & 0x10 ? 5100 - (val) * 100 :
+ 2050 - (val) * 50);
+ }
+}
+
+
+/*
+ After this point is the code to automatically determine which
+ VRM/VRD specification should be used depending on the CPU.
+*/
+
+struct vrm_model {
+ u8 vendor;
+ u8 eff_family;
+ u8 eff_model;
+ int vrm_type;
+};
+
+#define ANY 0xFF
+
+#ifdef CONFIG_X86
+
+static struct vrm_model vrm_models[] = {
+ {X86_VENDOR_AMD, 0x6, ANY, 90}, /* Athlon Duron etc */
+ {X86_VENDOR_AMD, 0xF, ANY, 24}, /* Athlon 64, Opteron */
+ {X86_VENDOR_INTEL, 0x6, 0x9, 85}, /* 0.13um too */
+ {X86_VENDOR_INTEL, 0x6, 0xB, 85}, /* Tualatin */
+ {X86_VENDOR_INTEL, 0x6, ANY, 82}, /* any P6 */
+ {X86_VENDOR_INTEL, 0x7, ANY, 0}, /* Itanium */
+ {X86_VENDOR_INTEL, 0xF, 0x0, 90}, /* P4 */
+ {X86_VENDOR_INTEL, 0xF, 0x1, 90}, /* P4 Willamette */
+ {X86_VENDOR_INTEL, 0xF, 0x2, 90}, /* P4 Northwood */
+ {X86_VENDOR_INTEL, 0xF, 0x3, 100}, /* P4 Prescott */
+ {X86_VENDOR_INTEL, 0xF, 0x4, 100}, /* P4 Prescott */
+ {X86_VENDOR_INTEL, 0x10,ANY, 0}, /* Itanium 2 */
+ {X86_VENDOR_UNKNOWN, ANY, ANY, 0} /* stop here */
+};
+
+static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
+{
+ int i = 0;
+
+ while (vrm_models[i].vendor!=X86_VENDOR_UNKNOWN) {
+ if (vrm_models[i].vendor==vendor)
+ if ((vrm_models[i].eff_family==eff_family)
+ && ((vrm_models[i].eff_model==eff_model) ||
+ (vrm_models[i].eff_model==ANY)))
+ return vrm_models[i].vrm_type;
+ i++;
+ }
+
+ return 0;
+}
+
+int vid_which_vrm(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+ u32 eax;
+ u8 eff_family, eff_model;
+ int vrm_ret;
+
+ if (c->x86 < 6) /* Any CPU with family lower than 6 */
+ return 0; /* doesn't have VID and/or CPUID */
+
+ eax = cpuid_eax(1);
+ eff_family = ((eax & 0x00000F00)>>8);
+ eff_model = ((eax & 0x000000F0)>>4);
+ if (eff_family == 0xF) { /* use extended model & family */
+ eff_family += ((eax & 0x00F00000)>>20);
+ eff_model += ((eax & 0x000F0000)>>16)<<4;
+ }
+ vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor);
+ if (vrm_ret == 0)
+ printk(KERN_INFO "hwmon-vid: Unknown VRM version of your "
+ "x86 CPU\n");
+ return vrm_ret;
+}
+
+/* and now something completely different for the non-x86 world */
+#else
+int vid_which_vrm(void)
+{
+ printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n");
+ return 0;
+}
+#endif
+
+EXPORT_SYMBOL(vid_from_reg);
+EXPORT_SYMBOL(vid_which_vrm);
+
+MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+
+MODULE_DESCRIPTION("hwmon-vid driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
new file mode 100644
index 0000000..9b41c9b
--- /dev/null
+++ b/drivers/hwmon/hwmon.c
@@ -0,0 +1,98 @@
+/*
+ hwmon.c - part of lm_sensors, Linux kernel modules for hardware monitoring
+
+ This file defines the sysfs class "hwmon", for use by sensors drivers.
+
+ Copyright (C) 2005 Mark M. Hoffman <mhoffman@lightlink.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/idr.h>
+#include <linux/hwmon.h>
+
+#define HWMON_ID_PREFIX "hwmon"
+#define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d"
+
+static struct class *hwmon_class;
+
+static DEFINE_IDR(hwmon_idr);
+
+/**
+ * hwmon_device_register - register w/ hwmon sysfs class
+ * @dev: the device to register
+ *
+ * hwmon_device_unregister() must be called when the class device is no
+ * longer needed.
+ *
+ * Returns the pointer to the new struct class device.
+ */
+struct class_device *hwmon_device_register(struct device *dev)
+{
+ struct class_device *cdev;
+ int id;
+
+ if (idr_pre_get(&hwmon_idr, GFP_KERNEL) == 0)
+ return ERR_PTR(-ENOMEM);
+
+ if (idr_get_new(&hwmon_idr, NULL, &id) < 0)
+ return ERR_PTR(-ENOMEM);
+
+ id = id & MAX_ID_MASK;
+ cdev = class_device_create(hwmon_class, MKDEV(0,0), dev,
+ HWMON_ID_FORMAT, id);
+
+ if (IS_ERR(cdev))
+ idr_remove(&hwmon_idr, id);
+
+ return cdev;
+}
+
+/**
+ * hwmon_device_unregister - removes the previously registered class device
+ *
+ * @cdev: the class device to destroy
+ */
+void hwmon_device_unregister(struct class_device *cdev)
+{
+ int id;
+
+ if (sscanf(cdev->class_id, HWMON_ID_FORMAT, &id) == 1) {
+ class_device_unregister(cdev);
+ idr_remove(&hwmon_idr, id);
+ } else
+ dev_dbg(cdev->dev,
+ "hwmon_device_unregister() failed: bad class ID!\n");
+}
+
+static int __init hwmon_init(void)
+{
+ hwmon_class = class_create(THIS_MODULE, "hwmon");
+ if (IS_ERR(hwmon_class)) {
+ printk(KERN_ERR "hwmon.c: couldn't create sysfs class\n");
+ return PTR_ERR(hwmon_class);
+ }
+ return 0;
+}
+
+static void __exit hwmon_exit(void)
+{
+ class_destroy(hwmon_class);
+}
+
+module_init(hwmon_init);
+module_exit(hwmon_exit);
+
+EXPORT_SYMBOL_GPL(hwmon_device_register);
+EXPORT_SYMBOL_GPL(hwmon_device_unregister);
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("hardware monitoring sysfs/class support");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index db20c9e..53cc2b6 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -36,19 +36,21 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
#include <asm/io.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+static unsigned short isa_address = 0x290;
/* Insmod parameters */
-SENSORS_INSMOD_2(it87, it8712);
+I2C_CLIENT_INSMOD_2(it87, it8712);
#define REG 0x2e /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
@@ -192,6 +194,7 @@
allocated. */
struct it87_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
enum chips type;
@@ -218,7 +221,7 @@
static int it87_attach_adapter(struct i2c_adapter *adapter);
-static int it87_find(int *address);
+static int it87_isa_attach_adapter(struct i2c_adapter *adapter);
static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
static int it87_detach_client(struct i2c_client *client);
@@ -239,6 +242,14 @@
.detach_client = it87_detach_client,
};
+static struct i2c_driver it87_isa_driver = {
+ .owner = THIS_MODULE,
+ .name = "it87-isa",
+ .attach_adapter = it87_isa_attach_adapter,
+ .detach_client = it87_detach_client,
+};
+
+
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -686,11 +697,16 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, it87_detect);
+ return i2c_probe(adapter, &addr_data, it87_detect);
}
-/* SuperIO detection - will change normal_isa[0] if a chip is found */
-static int it87_find(int *address)
+static int it87_isa_attach_adapter(struct i2c_adapter *adapter)
+{
+ return it87_detect(adapter, isa_address, -1);
+}
+
+/* SuperIO detection - will change isa_address if a chip is found */
+static int __init it87_find(int *address)
{
int err = -ENODEV;
@@ -721,7 +737,7 @@
return err;
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
int it87_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i;
@@ -738,7 +754,7 @@
/* Reserve the ISA region */
if (is_isa)
- if (!request_region(address, IT87_EXTENT, it87_driver.name))
+ if (!request_region(address, IT87_EXTENT, it87_isa_driver.name))
goto ERROR0;
/* Probe whether there is anything available on this address. Already
@@ -784,7 +800,7 @@
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
- new_client->driver = &it87_driver;
+ new_client->driver = is_isa ? &it87_isa_driver : &it87_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. */
@@ -840,6 +856,12 @@
it87_init_client(new_client, data);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR3;
+ }
+
device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr);
device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr);
device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr);
@@ -897,13 +919,15 @@
}
if (data->type == it8712) {
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
device_create_file_vrm(new_client);
device_create_file_vid(new_client);
}
return 0;
+ERROR3:
+ i2c_detach_client(new_client);
ERROR2:
kfree(data);
ERROR1:
@@ -915,17 +939,17 @@
static int it87_detach_client(struct i2c_client *client)
{
+ struct it87_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
if(i2c_is_isa_client(client))
release_region(client->addr, IT87_EXTENT);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -1158,16 +1182,28 @@
static int __init sm_it87_init(void)
{
- int addr;
+ int addr, res;
if (!it87_find(&addr)) {
- normal_isa[0] = addr;
+ isa_address = addr;
}
- return i2c_add_driver(&it87_driver);
+
+ res = i2c_add_driver(&it87_driver);
+ if (res)
+ return res;
+
+ res = i2c_isa_add_driver(&it87_isa_driver);
+ if (res) {
+ i2c_del_driver(&it87_driver);
+ return res;
+ }
+
+ return 0;
}
static void __exit sm_it87_exit(void)
{
+ i2c_isa_del_driver(&it87_isa_driver);
i2c_del_driver(&it87_driver);
}
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 7c6f9ea..be5c709 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -42,8 +42,9 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/*
* Addresses to scan
@@ -51,13 +52,12 @@
*/
static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(lm63);
+I2C_CLIENT_INSMOD_1(lm63);
/*
* The LM63 registers
@@ -152,6 +152,7 @@
struct lm63_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -358,7 +359,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm63_detect);
+ return i2c_probe(adapter, &addr_data, lm63_detect);
}
/*
@@ -437,6 +438,12 @@
lm63_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
if (data->config & 0x04) { /* tachometer enabled */
device_create_file(&new_client->dev,
&sensor_dev_attr_fan1_input.dev_attr);
@@ -462,6 +469,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -505,15 +514,15 @@
static int lm63_detach_client(struct i2c_client *client)
{
+ struct lm63_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 5be164e..9a3ebdf 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -23,17 +23,17 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
#include "lm75.h"
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(lm75);
+I2C_CLIENT_INSMOD_1(lm75);
/* Many LM75 constants specified below */
@@ -46,6 +46,7 @@
/* Each client has this additional data */
struct lm75_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -107,10 +108,10 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm75_detect);
+ return i2c_probe(adapter, &addr_data, lm75_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i;
@@ -119,16 +120,6 @@
int err = 0;
const char *name = "";
- /* Make sure we aren't probing the ISA bus!! This is just a safety check
- at this moment; i2c_detect really won't call us. */
-#ifdef DEBUG
- if (i2c_is_isa_adapter(adapter)) {
- dev_dbg(&adapter->dev,
- "lm75_detect called for an ISA bus adapter?!?\n");
- goto exit;
- }
-#endif
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
goto exit;
@@ -208,12 +199,20 @@
lm75_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -222,8 +221,10 @@
static int lm75_detach_client(struct i2c_client *client)
{
+ struct lm75_data *data = i2c_get_clientdata(client);
+ hwmon_device_unregister(data->class_dev);
i2c_detach_client(client);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -251,8 +252,12 @@
static void lm75_init_client(struct i2c_client *client)
{
- /* Initialize the LM75 chip */
- lm75_write_value(client, LM75_REG_CONF, 0);
+ int reg;
+
+ /* Enable if in shutdown mode */
+ reg = lm75_read_value(client, LM75_REG_CONF);
+ if (reg >= 0 && (reg & 0x01))
+ lm75_write_value(client, LM75_REG_CONF, reg & 0xfe);
}
static struct lm75_data *lm75_update_device(struct device *dev)
diff --git a/drivers/hwmon/lm75.h b/drivers/hwmon/lm75.h
index 63e3f2f..af7dc65 100644
--- a/drivers/hwmon/lm75.h
+++ b/drivers/hwmon/lm75.h
@@ -25,7 +25,7 @@
which contains this code, we don't worry about the wasted space.
*/
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
/* straight from the datasheet */
#define LM75_TEMP_MIN (-55000)
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index b98f449..866eab9 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -30,15 +30,14 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-
+#include <linux/hwmon.h>
+#include <linux/err.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(lm77);
+I2C_CLIENT_INSMOD_1(lm77);
/* The LM77 registers */
#define LM77_REG_TEMP 0x00
@@ -51,6 +50,7 @@
/* Each client has this additional data */
struct lm77_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid;
unsigned long last_updated; /* In jiffies */
@@ -208,10 +208,10 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm77_detect);
+ return i2c_probe(adapter, &addr_data, lm77_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
static int lm77_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
@@ -317,6 +317,12 @@
lm77_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_crit);
device_create_file(&new_client->dev, &dev_attr_temp1_min);
@@ -327,6 +333,8 @@
device_create_file(&new_client->dev, &dev_attr_alarms);
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -335,8 +343,10 @@
static int lm77_detach_client(struct i2c_client *client)
{
+ struct lm77_data *data = i2c_get_clientdata(client);
+ hwmon_device_unregister(data->class_dev);
i2c_detach_client(client);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 2924146..f6730dc 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -23,7 +23,10 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
#include <asm/io.h>
/* Addresses to scan */
@@ -31,10 +34,10 @@
0x25, 0x26, 0x27, 0x28, 0x29,
0x2a, 0x2b, 0x2c, 0x2d, 0x2e,
0x2f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+static unsigned short isa_address = 0x290;
/* Insmod parameters */
-SENSORS_INSMOD_3(lm78, lm78j, lm79);
+I2C_CLIENT_INSMOD_2(lm78, lm79);
/* Many LM78 constants specified below */
@@ -104,13 +107,6 @@
return val * 1000;
}
-/* VID: mV
- REG: (see doc/vid) */
-static inline int VID_FROM_REG(u8 val)
-{
- return val==0x1f ? 0 : val>=0x10 ? 5100-val*100 : 2050-val*50;
-}
-
#define DIV_FROM_REG(val) (1 << (val))
/* There are some complications in a module like this. First off, LM78 chips
@@ -134,6 +130,7 @@
allocated. */
struct lm78_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
enum chips type;
@@ -156,6 +153,7 @@
static int lm78_attach_adapter(struct i2c_adapter *adapter);
+static int lm78_isa_attach_adapter(struct i2c_adapter *adapter);
static int lm78_detect(struct i2c_adapter *adapter, int address, int kind);
static int lm78_detach_client(struct i2c_client *client);
@@ -174,6 +172,14 @@
.detach_client = lm78_detach_client,
};
+static struct i2c_driver lm78_isa_driver = {
+ .owner = THIS_MODULE,
+ .name = "lm78-isa",
+ .attach_adapter = lm78_isa_attach_adapter,
+ .detach_client = lm78_detach_client,
+};
+
+
/* 7 Voltages */
static ssize_t show_in(struct device *dev, char *buf, int nr)
{
@@ -445,7 +451,7 @@
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct lm78_data *data = lm78_update_device(dev);
- return sprintf(buf, "%d\n", VID_FROM_REG(data->vid));
+ return sprintf(buf, "%d\n", vid_from_reg(82, data->vid));
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
@@ -465,10 +471,15 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm78_detect);
+ return i2c_probe(adapter, &addr_data, lm78_detect);
}
-/* This function is called by i2c_detect */
+static int lm78_isa_attach_adapter(struct i2c_adapter *adapter)
+{
+ return lm78_detect(adapter, isa_address, -1);
+}
+
+/* This function is called by i2c_probe */
int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i, err;
@@ -485,7 +496,8 @@
/* Reserve the ISA region */
if (is_isa)
- if (!request_region(address, LM78_EXTENT, lm78_driver.name)) {
+ if (!request_region(address, LM78_EXTENT,
+ lm78_isa_driver.name)) {
err = -EBUSY;
goto ERROR0;
}
@@ -540,7 +552,7 @@
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
- new_client->driver = &lm78_driver;
+ new_client->driver = is_isa ? &lm78_isa_driver : &lm78_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. */
@@ -559,10 +571,9 @@
/* Determine the chip type. */
if (kind <= 0) {
i = lm78_read_value(new_client, LM78_REG_CHIPID);
- if (i == 0x00 || i == 0x20)
+ if (i == 0x00 || i == 0x20 /* LM78 */
+ || i == 0x40) /* LM78-J */
kind = lm78;
- else if (i == 0x40)
- kind = lm78j;
else if ((i & 0xfe) == 0xc0)
kind = lm79;
else {
@@ -578,8 +589,6 @@
if (kind == lm78) {
client_name = "lm78";
- } else if (kind == lm78j) {
- client_name = "lm78-j";
} else if (kind == lm79) {
client_name = "lm79";
}
@@ -605,6 +614,12 @@
}
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR3;
+ }
+
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
@@ -643,6 +658,8 @@
return 0;
+ERROR3:
+ i2c_detach_client(new_client);
ERROR2:
kfree(data);
ERROR1:
@@ -654,18 +671,18 @@
static int lm78_detach_client(struct i2c_client *client)
{
+ struct lm78_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
if(i2c_is_isa_client(client))
release_region(client->addr, LM78_EXTENT);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -777,18 +794,31 @@
static int __init sm_lm78_init(void)
{
- return i2c_add_driver(&lm78_driver);
+ int res;
+
+ res = i2c_add_driver(&lm78_driver);
+ if (res)
+ return res;
+
+ res = i2c_isa_add_driver(&lm78_isa_driver);
+ if (res) {
+ i2c_del_driver(&lm78_driver);
+ return res;
+ }
+
+ return 0;
}
static void __exit sm_lm78_exit(void)
{
+ i2c_isa_del_driver(&lm78_isa_driver);
i2c_del_driver(&lm78_driver);
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
-MODULE_DESCRIPTION("LM78, LM78-J and LM79 driver");
+MODULE_DESCRIPTION("LM78/LM79 driver");
MODULE_LICENSE("GPL");
module_init(sm_lm78_init);
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 8100595..83af8b3a 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -26,15 +26,15 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c,
0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(lm80);
+I2C_CLIENT_INSMOD_1(lm80);
/* Many LM80 constants specified below */
@@ -107,6 +107,7 @@
struct lm80_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -389,7 +390,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm80_detect);
+ return i2c_probe(adapter, &addr_data, lm80_detect);
}
int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
@@ -451,6 +452,12 @@
data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2));
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto error_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in2_min);
@@ -487,6 +494,8 @@
return 0;
+error_detach:
+ i2c_detach_client(new_client);
error_free:
kfree(data);
exit:
@@ -495,15 +504,15 @@
static int lm80_detach_client(struct i2c_client *client)
{
+ struct lm80_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index a49008b..d74b2c2 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -32,8 +32,9 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/*
* Addresses to scan
@@ -45,13 +46,12 @@
0x29, 0x2a, 0x2b,
0x4c, 0x4d, 0x4e,
I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(lm83);
+I2C_CLIENT_INSMOD_1(lm83);
/*
* The LM83 registers
@@ -138,6 +138,7 @@
struct lm83_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -212,7 +213,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm83_detect);
+ return i2c_probe(adapter, &addr_data, lm83_detect);
}
/*
@@ -312,6 +313,12 @@
*/
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev,
&sensor_dev_attr_temp1_input.dev_attr);
device_create_file(&new_client->dev,
@@ -340,6 +347,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -348,15 +357,15 @@
static int lm83_detach_client(struct i2c_client *client)
{
+ struct lm83_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index b4d7fd4..ab214df 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -28,15 +28,15 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
+I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
/* The LM85 registers */
@@ -281,15 +281,6 @@
#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
-/* i2c-vid.h defines vid_from_reg() */
-#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm)))
-
-/* Unlike some other drivers we DO NOT set initial limits. Use
- * the config file to set limits. Some users have reported
- * motherboards shutting down when we set limits in a previous
- * version of the driver.
- */
-
/* Chip sampling rates
*
* Some sensors are not updated more frequently than once per second
@@ -339,6 +330,7 @@
struct lm85_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
enum chips type;
@@ -1019,7 +1011,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm85_detect);
+ return i2c_probe(adapter, &addr_data, lm85_detect);
}
int lm85_detect(struct i2c_adapter *adapter, int address,
@@ -1031,11 +1023,6 @@
int err = 0;
const char *type_name = "";
- if (i2c_is_isa_adapter(adapter)) {
- /* This chip has no ISA interface */
- goto ERROR0 ;
- };
-
if (!i2c_check_functionality(adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
/* We need to be able to do byte I/O */
@@ -1160,12 +1147,18 @@
goto ERROR1;
/* Set the VRM version */
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
/* Initialize the LM85 chip */
lm85_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR2;
+ }
+
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan2_input);
device_create_file(&new_client->dev, &dev_attr_fan3_input);
@@ -1235,6 +1228,8 @@
return 0;
/* Error out and cleanup code */
+ ERROR2:
+ i2c_detach_client(new_client);
ERROR1:
kfree(data);
ERROR0:
@@ -1243,8 +1238,10 @@
int lm85_detach_client(struct i2c_client *client)
{
+ struct lm85_data *data = i2c_get_clientdata(client);
+ hwmon_device_unregister(data->class_dev);
i2c_detach_client(client);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 1921ed1..dca996d 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -57,8 +57,9 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
/*
* Addresses to scan
@@ -66,13 +67,12 @@
*/
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(lm87);
+I2C_CLIENT_INSMOD_1(lm87);
/*
* The LM87 registers
@@ -175,6 +175,7 @@
struct lm87_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -537,7 +538,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm87_detect);
+ return i2c_probe(adapter, &addr_data, lm87_detect);
}
/*
@@ -608,6 +609,12 @@
data->in_scale[7] = 1875;
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in1_max);
@@ -673,6 +680,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -685,7 +694,7 @@
u8 config;
data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
config = lm87_read_value(client, LM87_REG_CONFIG);
if (!(config & 0x01)) {
@@ -719,15 +728,15 @@
static int lm87_detach_client(struct i2c_client *client)
{
+ struct lm87_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index a67dcad..14de05f 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -75,8 +75,9 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/*
* Addresses to scan
@@ -89,13 +90,12 @@
*/
static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
+I2C_CLIENT_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
/*
* The LM90 registers
@@ -200,6 +200,7 @@
struct lm90_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -352,7 +353,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm90_detect);
+ return i2c_probe(adapter, &addr_data, lm90_detect);
}
/*
@@ -500,6 +501,12 @@
lm90_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev,
&sensor_dev_attr_temp1_input.dev_attr);
device_create_file(&new_client->dev,
@@ -524,6 +531,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -547,15 +556,15 @@
static int lm90_detach_client(struct i2c_client *client)
{
+ struct lm90_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index 215c8e4..647b7c7 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -44,17 +44,16 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-
+#include <linux/hwmon.h>
+#include <linux/err.h>
/* The LM92 and MAX6635 have 2 two-state pins for address selection,
resulting in 4 possible addresses. */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(lm92);
+I2C_CLIENT_INSMOD_1(lm92);
/* The LM92 registers */
#define LM92_REG_CONFIG 0x01 /* 8-bit, RW */
@@ -96,6 +95,7 @@
/* Client data (each client gets its own) */
struct lm92_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -359,6 +359,12 @@
lm92_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_crit);
device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
@@ -370,6 +376,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -380,20 +388,20 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm92_detect);
+ return i2c_probe(adapter, &addr_data, lm92_detect);
}
static int lm92_detach_client(struct i2c_client *client)
{
+ struct lm92_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 3c159f1..16bf71f 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -31,20 +31,19 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-
+#include <linux/hwmon.h>
+#include <linux/err.h>
static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
0x29, 0x2a, 0x2b,
0x4c, 0x4d, 0x4e,
I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(max1619);
+I2C_CLIENT_INSMOD_1(max1619);
/*
* The MAX1619 registers
@@ -104,6 +103,7 @@
struct max1619_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -179,7 +179,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, max1619_detect);
+ return i2c_probe(adapter, &addr_data, max1619_detect);
}
/*
@@ -275,6 +275,12 @@
max1619_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_temp2_min);
@@ -285,6 +291,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -308,15 +316,15 @@
static int max1619_detach_client(struct i2c_client *client)
{
+ struct max1619_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index fa4032d..cf2a357 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -38,23 +38,19 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
#include <asm/io.h>
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
-static struct i2c_force_data forces[] = {{ NULL }};
static u8 devid;
-static unsigned int extra_isa[3];
+static unsigned short address;
+static unsigned short extra_isa[3];
static u8 confreg[4];
enum chips { any_chip, pc87360, pc87363, pc87364, pc87365, pc87366 };
-static struct i2c_address_data addr_data = {
- .normal_i2c = normal_i2c,
- .normal_isa = normal_isa,
- .forces = forces,
-};
static int init = 1;
module_param(init, int, 0);
@@ -186,6 +182,7 @@
struct pc87360_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
@@ -224,8 +221,7 @@
* Functions declaration
*/
-static int pc87360_attach_adapter(struct i2c_adapter *adapter);
-static int pc87360_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pc87360_detect(struct i2c_adapter *adapter);
static int pc87360_detach_client(struct i2c_client *client);
static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
@@ -242,8 +238,7 @@
static struct i2c_driver pc87360_driver = {
.owner = THIS_MODULE,
.name = "pc87360",
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = pc87360_attach_adapter,
+ .attach_adapter = pc87360_detect,
.detach_client = pc87360_detach_client,
};
@@ -251,168 +246,178 @@
* Sysfs stuff
*/
-static ssize_t set_fan_min(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[attr->index],
+ FAN_DIV_FROM_REG(data->fan_status[attr->index])));
+}
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[attr->index],
+ FAN_DIV_FROM_REG(data->fan_status[attr->index])));
+}
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n",
+ FAN_DIV_FROM_REG(data->fan_status[attr->index]));
+}
+static ssize_t show_fan_status(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n",
+ FAN_STATUS_FROM_REG(data->fan_status[attr->index]));
+}
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct pc87360_data *data = i2c_get_clientdata(client);
long fan_min = simple_strtol(buf, NULL, 10);
down(&data->update_lock);
- fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[nr]));
+ fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[attr->index]));
/* If it wouldn't fit, change clock divisor */
while (fan_min > 255
- && (data->fan_status[nr] & 0x60) != 0x60) {
+ && (data->fan_status[attr->index] & 0x60) != 0x60) {
fan_min >>= 1;
- data->fan[nr] >>= 1;
- data->fan_status[nr] += 0x20;
+ data->fan[attr->index] >>= 1;
+ data->fan_status[attr->index] += 0x20;
}
- data->fan_min[nr] = fan_min > 255 ? 255 : fan_min;
- pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(nr),
- data->fan_min[nr]);
+ data->fan_min[attr->index] = fan_min > 255 ? 255 : fan_min;
+ pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(attr->index),
+ data->fan_min[attr->index]);
/* Write new divider, preserve alarm bits */
- pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(nr),
- data->fan_status[nr] & 0xF9);
+ pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(attr->index),
+ data->fan_status[attr->index] & 0xF9);
up(&data->update_lock);
return count;
}
#define show_and_set_fan(offset) \
-static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[offset-1], \
- FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \
-} \
-static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[offset-1], \
- FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \
-} \
-static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", \
- FAN_DIV_FROM_REG(data->fan_status[offset-1])); \
-} \
-static ssize_t show_fan##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", \
- FAN_STATUS_FROM_REG(data->fan_status[offset-1])); \
-} \
-static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- return set_fan_min(dev, buf, count, offset-1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
- show_fan##offset##_input, NULL); \
-static DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \
- show_fan##offset##_min, set_fan##offset##_min); \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
- show_fan##offset##_div, NULL); \
-static DEVICE_ATTR(fan##offset##_status, S_IRUGO, \
- show_fan##offset##_status, NULL);
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan_input, NULL, offset-1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \
+ show_fan_min, set_fan_min, offset-1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
+ show_fan_div, NULL, offset-1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_status, S_IRUGO, \
+ show_fan_status, NULL, offset-1);
show_and_set_fan(1)
show_and_set_fan(2)
show_and_set_fan(3)
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n",
+ PWM_FROM_REG(data->pwm[attr->index],
+ FAN_CONFIG_INVERT(data->fan_conf,
+ attr->index)));
+}
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->pwm[attr->index] = PWM_TO_REG(val,
+ FAN_CONFIG_INVERT(data->fan_conf, attr->index));
+ pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(attr->index),
+ data->pwm[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+
#define show_and_set_pwm(offset) \
-static ssize_t show_pwm##offset(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", \
- PWM_FROM_REG(data->pwm[offset-1], \
- FAN_CONFIG_INVERT(data->fan_conf, \
- offset-1))); \
-} \
-static ssize_t set_pwm##offset(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->pwm[offset-1] = PWM_TO_REG(val, \
- FAN_CONFIG_INVERT(data->fan_conf, offset-1)); \
- pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(offset-1), \
- data->pwm[offset-1]); \
- up(&data->update_lock); \
- return count; \
-} \
-static DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \
- show_pwm##offset, set_pwm##offset);
+static SENSOR_DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \
+ show_pwm, set_pwm, offset-1);
show_and_set_pwm(1)
show_and_set_pwm(2)
show_and_set_pwm(3)
+static ssize_t show_in_input(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in[attr->index],
+ data->in_vref));
+}
+static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[attr->index],
+ data->in_vref));
+}
+static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[attr->index],
+ data->in_vref));
+}
+static ssize_t show_in_status(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", data->in_status[attr->index]);
+}
+static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_min[attr->index] = IN_TO_REG(val, data->in_vref);
+ pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MIN,
+ data->in_min[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_max[attr->index] = IN_TO_REG(val,
+ data->in_vref);
+ pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MAX,
+ data->in_max[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+
#define show_and_set_in(offset) \
-static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
- data->in_vref)); \
-} \
-static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
- data->in_vref)); \
-} \
-static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
- data->in_vref)); \
-} \
-static ssize_t show_in##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", data->in_status[offset]); \
-} \
-static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->in_min[offset] = IN_TO_REG(val, data->in_vref); \
- pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MIN, \
- data->in_min[offset]); \
- up(&data->update_lock); \
- return count; \
-} \
-static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->in_max[offset] = IN_TO_REG(val, \
- data->in_vref); \
- pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MAX, \
- data->in_max[offset]); \
- up(&data->update_lock); \
- return count; \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
- show_in##offset##_input, NULL); \
-static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
- show_in##offset##_min, set_in##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
- show_in##offset##_max, set_in##offset##_max); \
-static DEVICE_ATTR(in##offset##_status, S_IRUGO, \
- show_in##offset##_status, NULL);
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in_input, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
+ show_in_max, set_in_max, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_status, S_IRUGO, \
+ show_in_status, NULL, offset);
show_and_set_in(0)
show_and_set_in(1)
show_and_set_in(2)
@@ -425,88 +430,97 @@
show_and_set_in(9)
show_and_set_in(10)
+static ssize_t show_therm_input(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in[attr->index],
+ data->in_vref));
+}
+static ssize_t show_therm_min(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[attr->index],
+ data->in_vref));
+}
+static ssize_t show_therm_max(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[attr->index],
+ data->in_vref));
+}
+static ssize_t show_therm_crit(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[attr->index-11],
+ data->in_vref));
+}
+static ssize_t show_therm_status(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%u\n", data->in_status[attr->index]);
+}
+static ssize_t set_therm_min(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_min[attr->index] = IN_TO_REG(val, data->in_vref);
+ pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MIN,
+ data->in_min[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_therm_max(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_max[attr->index] = IN_TO_REG(val, data->in_vref);
+ pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MAX,
+ data->in_max[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_crit[attr->index-11] = IN_TO_REG(val, data->in_vref);
+ pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_CRIT,
+ data->in_crit[attr->index-11]);
+ up(&data->update_lock);
+ return count;
+}
+
#define show_and_set_therm(offset) \
-static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset+7], \
- data->in_vref)); \
-} \
-static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset+7], \
- data->in_vref)); \
-} \
-static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset+7], \
- data->in_vref)); \
-} \
-static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[offset-4], \
- data->in_vref)); \
-} \
-static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%u\n", data->in_status[offset+7]); \
-} \
-static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->in_min[offset+7] = IN_TO_REG(val, data->in_vref); \
- pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MIN, \
- data->in_min[offset+7]); \
- up(&data->update_lock); \
- return count; \
-} \
-static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->in_max[offset+7] = IN_TO_REG(val, data->in_vref); \
- pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MAX, \
- data->in_max[offset+7]); \
- up(&data->update_lock); \
- return count; \
-} \
-static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->in_crit[offset-4] = IN_TO_REG(val, data->in_vref); \
- pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_CRIT, \
- data->in_crit[offset-4]); \
- up(&data->update_lock); \
- return count; \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
- show_temp##offset##_input, NULL); \
-static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
- show_temp##offset##_min, set_temp##offset##_min); \
-static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
- show_temp##offset##_max, set_temp##offset##_max); \
-static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
- show_temp##offset##_crit, set_temp##offset##_crit); \
-static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
- show_temp##offset##_status, NULL);
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_therm_input, NULL, 11+offset-4); \
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+ show_therm_min, set_therm_min, 11+offset-4); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+ show_therm_max, set_therm_max, 11+offset-4); \
+static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
+ show_therm_crit, set_therm_crit, 11+offset-4); \
+static SENSOR_DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
+ show_therm_status, NULL, 11+offset-4);
show_and_set_therm(4)
show_and_set_therm(5)
show_and_set_therm(6)
@@ -539,84 +553,93 @@
}
static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL);
+static ssize_t show_temp_input(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
+}
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[attr->index]));
+}
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[attr->index]));
+}
+static ssize_t show_temp_crit(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[attr->index]));
+}
+static ssize_t show_temp_status(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87360_data *data = pc87360_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_status[attr->index]);
+}
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_min[attr->index] = TEMP_TO_REG(val);
+ pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MIN,
+ data->temp_min[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_max[attr->index] = TEMP_TO_REG(val);
+ pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MAX,
+ data->temp_max[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pc87360_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_crit[attr->index] = TEMP_TO_REG(val);
+ pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_CRIT,
+ data->temp_crit[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+
#define show_and_set_temp(offset) \
-static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
-} \
-static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
-} \
-static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
-}\
-static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[offset-1])); \
-}\
-static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct pc87360_data *data = pc87360_update_device(dev); \
- return sprintf(buf, "%d\n", data->temp_status[offset-1]); \
-}\
-static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->temp_min[offset-1] = TEMP_TO_REG(val); \
- pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MIN, \
- data->temp_min[offset-1]); \
- up(&data->update_lock); \
- return count; \
-} \
-static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->temp_max[offset-1] = TEMP_TO_REG(val); \
- pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MAX, \
- data->temp_max[offset-1]); \
- up(&data->update_lock); \
- return count; \
-} \
-static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct pc87360_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->temp_crit[offset-1] = TEMP_TO_REG(val); \
- pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_CRIT, \
- data->temp_crit[offset-1]); \
- up(&data->update_lock); \
- return count; \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
- show_temp##offset##_input, NULL); \
-static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
- show_temp##offset##_min, set_temp##offset##_min); \
-static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
- show_temp##offset##_max, set_temp##offset##_max); \
-static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
- show_temp##offset##_crit, set_temp##offset##_crit); \
-static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
- show_temp##offset##_status, NULL);
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp_input, NULL, offset-1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+ show_temp_min, set_temp_min, offset-1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+ show_temp_max, set_temp_max, offset-1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
+ show_temp_crit, set_temp_crit, offset-1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
+ show_temp_status, NULL, offset-1);
show_and_set_temp(1)
show_and_set_temp(2)
show_and_set_temp(3)
@@ -632,12 +655,7 @@
* Device detection, registration and update
*/
-static int pc87360_attach_adapter(struct i2c_adapter *adapter)
-{
- return i2c_detect(adapter, &addr_data, pc87360_detect);
-}
-
-static int pc87360_find(int sioaddr, u8 *devid, int *address)
+static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses)
{
u16 val;
int i;
@@ -683,7 +701,7 @@
continue;
}
- address[i] = val;
+ addresses[i] = val;
if (i==0) { /* Fans */
confreg[0] = superio_inb(sioaddr, 0xF0);
@@ -727,9 +745,7 @@
return 0;
}
-/* We don't really care about the address.
- Read from extra_isa instead. */
-int pc87360_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pc87360_detect(struct i2c_adapter *adapter)
{
int i;
struct i2c_client *new_client;
@@ -738,9 +754,6 @@
const char *name = "pc87360";
int use_thermistors = 0;
- if (!i2c_is_isa_adapter(adapter))
- return -ENODEV;
-
if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
return -ENOMEM;
memset(data, 0x00, sizeof(struct pc87360_data));
@@ -838,51 +851,57 @@
}
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR3;
+ }
+
if (data->innr) {
- device_create_file(&new_client->dev, &dev_attr_in0_input);
- device_create_file(&new_client->dev, &dev_attr_in1_input);
- device_create_file(&new_client->dev, &dev_attr_in2_input);
- device_create_file(&new_client->dev, &dev_attr_in3_input);
- device_create_file(&new_client->dev, &dev_attr_in4_input);
- device_create_file(&new_client->dev, &dev_attr_in5_input);
- device_create_file(&new_client->dev, &dev_attr_in6_input);
- device_create_file(&new_client->dev, &dev_attr_in7_input);
- device_create_file(&new_client->dev, &dev_attr_in8_input);
- device_create_file(&new_client->dev, &dev_attr_in9_input);
- device_create_file(&new_client->dev, &dev_attr_in10_input);
- device_create_file(&new_client->dev, &dev_attr_in0_min);
- device_create_file(&new_client->dev, &dev_attr_in1_min);
- device_create_file(&new_client->dev, &dev_attr_in2_min);
- device_create_file(&new_client->dev, &dev_attr_in3_min);
- device_create_file(&new_client->dev, &dev_attr_in4_min);
- device_create_file(&new_client->dev, &dev_attr_in5_min);
- device_create_file(&new_client->dev, &dev_attr_in6_min);
- device_create_file(&new_client->dev, &dev_attr_in7_min);
- device_create_file(&new_client->dev, &dev_attr_in8_min);
- device_create_file(&new_client->dev, &dev_attr_in9_min);
- device_create_file(&new_client->dev, &dev_attr_in10_min);
- device_create_file(&new_client->dev, &dev_attr_in0_max);
- device_create_file(&new_client->dev, &dev_attr_in1_max);
- device_create_file(&new_client->dev, &dev_attr_in2_max);
- device_create_file(&new_client->dev, &dev_attr_in3_max);
- device_create_file(&new_client->dev, &dev_attr_in4_max);
- device_create_file(&new_client->dev, &dev_attr_in5_max);
- device_create_file(&new_client->dev, &dev_attr_in6_max);
- device_create_file(&new_client->dev, &dev_attr_in7_max);
- device_create_file(&new_client->dev, &dev_attr_in8_max);
- device_create_file(&new_client->dev, &dev_attr_in9_max);
- device_create_file(&new_client->dev, &dev_attr_in10_max);
- device_create_file(&new_client->dev, &dev_attr_in0_status);
- device_create_file(&new_client->dev, &dev_attr_in1_status);
- device_create_file(&new_client->dev, &dev_attr_in2_status);
- device_create_file(&new_client->dev, &dev_attr_in3_status);
- device_create_file(&new_client->dev, &dev_attr_in4_status);
- device_create_file(&new_client->dev, &dev_attr_in5_status);
- device_create_file(&new_client->dev, &dev_attr_in6_status);
- device_create_file(&new_client->dev, &dev_attr_in7_status);
- device_create_file(&new_client->dev, &dev_attr_in8_status);
- device_create_file(&new_client->dev, &dev_attr_in9_status);
- device_create_file(&new_client->dev, &dev_attr_in10_status);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in9_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in10_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in8_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in9_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in10_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in8_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in9_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in10_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in0_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in1_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in2_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in3_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in4_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in5_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in6_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in7_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in8_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in9_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in10_status.dev_attr);
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
device_create_file(&new_client->dev, &dev_attr_vrm);
@@ -890,90 +909,92 @@
}
if (data->tempnr) {
- device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_temp2_input);
- device_create_file(&new_client->dev, &dev_attr_temp1_min);
- device_create_file(&new_client->dev, &dev_attr_temp2_min);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp2_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_crit);
- device_create_file(&new_client->dev, &dev_attr_temp2_crit);
- device_create_file(&new_client->dev, &dev_attr_temp1_status);
- device_create_file(&new_client->dev, &dev_attr_temp2_status);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_crit.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_crit.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_status.dev_attr);
device_create_file(&new_client->dev, &dev_attr_alarms_temp);
}
if (data->tempnr == 3) {
- device_create_file(&new_client->dev, &dev_attr_temp3_input);
- device_create_file(&new_client->dev, &dev_attr_temp3_min);
- device_create_file(&new_client->dev, &dev_attr_temp3_max);
- device_create_file(&new_client->dev, &dev_attr_temp3_crit);
- device_create_file(&new_client->dev, &dev_attr_temp3_status);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_crit.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_status.dev_attr);
}
if (data->innr == 14) {
- device_create_file(&new_client->dev, &dev_attr_temp4_input);
- device_create_file(&new_client->dev, &dev_attr_temp5_input);
- device_create_file(&new_client->dev, &dev_attr_temp6_input);
- device_create_file(&new_client->dev, &dev_attr_temp4_min);
- device_create_file(&new_client->dev, &dev_attr_temp5_min);
- device_create_file(&new_client->dev, &dev_attr_temp6_min);
- device_create_file(&new_client->dev, &dev_attr_temp4_max);
- device_create_file(&new_client->dev, &dev_attr_temp5_max);
- device_create_file(&new_client->dev, &dev_attr_temp6_max);
- device_create_file(&new_client->dev, &dev_attr_temp4_crit);
- device_create_file(&new_client->dev, &dev_attr_temp5_crit);
- device_create_file(&new_client->dev, &dev_attr_temp6_crit);
- device_create_file(&new_client->dev, &dev_attr_temp4_status);
- device_create_file(&new_client->dev, &dev_attr_temp5_status);
- device_create_file(&new_client->dev, &dev_attr_temp6_status);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp4_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp5_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp6_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp4_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp5_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp6_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp4_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp5_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp6_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp4_crit.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp5_crit.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp6_crit.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp4_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp5_status.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp6_status.dev_attr);
}
if (data->fannr) {
if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) {
device_create_file(&new_client->dev,
- &dev_attr_fan1_input);
+ &sensor_dev_attr_fan1_input.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan1_min);
+ &sensor_dev_attr_fan1_min.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan1_div);
+ &sensor_dev_attr_fan1_div.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan1_status);
+ &sensor_dev_attr_fan1_status.dev_attr);
}
if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) {
device_create_file(&new_client->dev,
- &dev_attr_fan2_input);
+ &sensor_dev_attr_fan2_input.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan2_min);
+ &sensor_dev_attr_fan2_min.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan2_div);
+ &sensor_dev_attr_fan2_div.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan2_status);
+ &sensor_dev_attr_fan2_status.dev_attr);
}
if (FAN_CONFIG_CONTROL(data->fan_conf, 0))
- device_create_file(&new_client->dev, &dev_attr_pwm1);
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr);
if (FAN_CONFIG_CONTROL(data->fan_conf, 1))
- device_create_file(&new_client->dev, &dev_attr_pwm2);
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr);
}
if (data->fannr == 3) {
if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) {
device_create_file(&new_client->dev,
- &dev_attr_fan3_input);
+ &sensor_dev_attr_fan3_input.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan3_min);
+ &sensor_dev_attr_fan3_min.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan3_div);
+ &sensor_dev_attr_fan3_div.dev_attr);
device_create_file(&new_client->dev,
- &dev_attr_fan3_status);
+ &sensor_dev_attr_fan3_status.dev_attr);
}
if (FAN_CONFIG_CONTROL(data->fan_conf, 2))
- device_create_file(&new_client->dev, &dev_attr_pwm3);
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr);
}
return 0;
+ERROR3:
+ i2c_detach_client(new_client);
ERROR2:
for (i = 0; i < 3; i++) {
if (data->address[i]) {
@@ -990,11 +1011,10 @@
struct pc87360_data *data = i2c_get_clientdata(client);
int i;
- if ((i = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((i = i2c_detach_client(client)))
return i;
- }
for (i = 0; i < 3; i++) {
if (data->address[i]) {
@@ -1320,23 +1340,23 @@
/* Arbitrarily pick one of the addresses */
for (i = 0; i < 3; i++) {
if (extra_isa[i] != 0x0000) {
- normal_isa[0] = extra_isa[i];
+ address = extra_isa[i];
break;
}
}
- if (normal_isa[0] == 0x0000) {
+ if (address == 0x0000) {
printk(KERN_WARNING "pc87360: No active logical device, "
"module not inserted.\n");
return -ENODEV;
}
- return i2c_add_driver(&pc87360_driver);
+ return i2c_isa_add_driver(&pc87360_driver);
}
static void __exit pc87360_exit(void)
{
- i2c_del_driver(&pc87360_driver);
+ i2c_isa_del_driver(&pc87360_driver);
}
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 6bbfc8f..8610bce0 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -55,7 +55,9 @@
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <asm/io.h>
@@ -68,14 +70,10 @@
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
-/* Addresses to scan.
+/* Device address
Note that we can't determine the ISA address until we have initialized
our module */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
-
-/* Insmod parameters */
-SENSORS_INSMOD_1(sis5595);
+static unsigned short address;
/* Many SIS5595 constants specified below */
@@ -168,6 +166,7 @@
allocated. */
struct sis5595_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
struct semaphore update_lock;
@@ -190,8 +189,7 @@
static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */
-static int sis5595_attach_adapter(struct i2c_adapter *adapter);
-static int sis5595_detect(struct i2c_adapter *adapter, int address, int kind);
+static int sis5595_detect(struct i2c_adapter *adapter);
static int sis5595_detach_client(struct i2c_client *client);
static int sis5595_read_value(struct i2c_client *client, u8 register);
@@ -202,9 +200,7 @@
static struct i2c_driver sis5595_driver = {
.owner = THIS_MODULE,
.name = "sis5595",
- .id = I2C_DRIVERID_SIS5595,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = sis5595_attach_adapter,
+ .attach_adapter = sis5595_detect,
.detach_client = sis5595_detach_client,
};
@@ -476,14 +472,7 @@
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
/* This is called when the module is loaded */
-static int sis5595_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, sis5595_detect);
-}
-
-int sis5595_detect(struct i2c_adapter *adapter, int address, int kind)
+static int sis5595_detect(struct i2c_adapter *adapter)
{
int err = 0;
int i;
@@ -492,10 +481,6 @@
char val;
u16 a;
- /* Make sure we are probing the ISA bus!! */
- if (!i2c_is_isa_adapter(adapter))
- goto exit;
-
if (force_addr)
address = force_addr & ~(SIS5595_EXTENT - 1);
/* Reserve the ISA region */
@@ -578,6 +563,12 @@
}
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
@@ -608,7 +599,9 @@
device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
}
return 0;
-
+
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit_release:
@@ -619,18 +612,17 @@
static int sis5595_detach_client(struct i2c_client *client)
{
+ struct sis5595_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
- if (i2c_is_isa_client(client))
- release_region(client->addr, SIS5595_EXTENT);
+ release_region(client->addr, SIS5595_EXTENT);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -745,7 +737,6 @@
{
u16 val;
int *i;
- int addr = 0;
for (i = blacklist; *i != 0; i++) {
struct pci_dev *dev;
@@ -761,22 +752,19 @@
pci_read_config_word(dev, SIS5595_BASE_REG, &val))
return -ENODEV;
- addr = val & ~(SIS5595_EXTENT - 1);
- if (addr == 0 && force_addr == 0) {
+ address = val & ~(SIS5595_EXTENT - 1);
+ if (address == 0 && force_addr == 0) {
dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
- if (force_addr)
- addr = force_addr; /* so detect will get called */
- if (!addr) {
+ if (!address) {
dev_err(&dev->dev,"No SiS 5595 sensors found.\n");
return -ENODEV;
}
- normal_isa[0] = addr;
s_bridge = pci_dev_get(dev);
- if (i2c_add_driver(&sis5595_driver)) {
+ if (i2c_isa_add_driver(&sis5595_driver)) {
pci_dev_put(s_bridge);
s_bridge = NULL;
}
@@ -803,7 +791,7 @@
{
pci_unregister_driver(&sis5595_pci_driver);
if (s_bridge != NULL) {
- i2c_del_driver(&sis5595_driver);
+ i2c_isa_del_driver(&sis5595_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index fdeeb3a..7fe7157 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -31,23 +31,14 @@
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
#include <linux/init.h>
#include <asm/io.h>
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Address is autodetected, there is no default value */
-static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
-static struct i2c_force_data forces[] = {{NULL}};
-
-enum chips { any_chip, smsc47b397 };
-static struct i2c_address_data addr_data = {
- .normal_i2c = normal_i2c,
- .normal_isa = normal_isa,
- .probe = normal_i2c, /* cheat */
- .ignore = normal_i2c, /* cheat */
- .forces = forces,
-};
+static unsigned short address;
/* Super-I/0 registers and commands */
@@ -100,6 +91,7 @@
struct smsc47b397_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
struct semaphore update_lock;
@@ -215,52 +207,40 @@
#define device_create_file_fan(client, num) \
device_create_file(&client->dev, &dev_attr_fan##num##_input)
-static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind);
-
-static int smsc47b397_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, smsc47b397_detect);
-}
-
static int smsc47b397_detach_client(struct i2c_client *client)
{
+ struct smsc47b397_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
release_region(client->addr, SMSC_EXTENT);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
+static int smsc47b397_detect(struct i2c_adapter *adapter);
+
static struct i2c_driver smsc47b397_driver = {
.owner = THIS_MODULE,
.name = "smsc47b397",
- .id = I2C_DRIVERID_SMSC47B397,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = smsc47b397_attach_adapter,
+ .attach_adapter = smsc47b397_detect,
.detach_client = smsc47b397_detach_client,
};
-static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int smsc47b397_detect(struct i2c_adapter *adapter)
{
struct i2c_client *new_client;
struct smsc47b397_data *data;
int err = 0;
- if (!i2c_is_isa_adapter(adapter)) {
- return 0;
- }
-
- if (!request_region(addr, SMSC_EXTENT, smsc47b397_driver.name)) {
- dev_err(&adapter->dev, "Region 0x%x already in use!\n", addr);
+ if (!request_region(address, SMSC_EXTENT, smsc47b397_driver.name)) {
+ dev_err(&adapter->dev, "Region 0x%x already in use!\n",
+ address);
return -EBUSY;
}
@@ -272,7 +252,7 @@
new_client = &data->client;
i2c_set_clientdata(new_client, data);
- new_client->addr = addr;
+ new_client->addr = address;
init_MUTEX(&data->lock);
new_client->adapter = adapter;
new_client->driver = &smsc47b397_driver;
@@ -285,6 +265,12 @@
if ((err = i2c_attach_client(new_client)))
goto error_free;
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto error_detach;
+ }
+
device_create_file_temp(new_client, 1);
device_create_file_temp(new_client, 2);
device_create_file_temp(new_client, 3);
@@ -297,14 +283,16 @@
return 0;
+error_detach:
+ i2c_detach_client(new_client);
error_free:
kfree(data);
error_release:
- release_region(addr, SMSC_EXTENT);
+ release_region(address, SMSC_EXTENT);
return err;
}
-static int __init smsc47b397_find(unsigned int *addr)
+static int __init smsc47b397_find(unsigned short *addr)
{
u8 id, rev;
@@ -333,15 +321,15 @@
{
int ret;
- if ((ret = smsc47b397_find(normal_isa)))
+ if ((ret = smsc47b397_find(&address)))
return ret;
- return i2c_add_driver(&smsc47b397_driver);
+ return i2c_isa_add_driver(&smsc47b397_driver);
}
static void __exit smsc47b397_exit(void)
{
- i2c_del_driver(&smsc47b397_driver);
+ i2c_isa_del_driver(&smsc47b397_driver);
}
MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 7166ad0..7e699a8 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -30,21 +30,14 @@
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
#include <linux/init.h>
#include <asm/io.h>
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Address is autodetected, there is no default value */
-static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
-static struct i2c_force_data forces[] = {{NULL}};
-
-enum chips { any_chip, smsc47m1 };
-static struct i2c_address_data addr_data = {
- .normal_i2c = normal_i2c,
- .normal_isa = normal_isa,
- .forces = forces,
-};
+static unsigned short address;
/* Super-I/0 registers and commands */
@@ -108,6 +101,7 @@
struct smsc47m1_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
struct semaphore update_lock;
@@ -121,9 +115,7 @@
};
-static int smsc47m1_attach_adapter(struct i2c_adapter *adapter);
-static int smsc47m1_find(int *address);
-static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind);
+static int smsc47m1_detect(struct i2c_adapter *adapter);
static int smsc47m1_detach_client(struct i2c_client *client);
static int smsc47m1_read_value(struct i2c_client *client, u8 reg);
@@ -136,9 +128,7 @@
static struct i2c_driver smsc47m1_driver = {
.owner = THIS_MODULE,
.name = "smsc47m1",
- .id = I2C_DRIVERID_SMSC47M1,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = smsc47m1_attach_adapter,
+ .attach_adapter = smsc47m1_detect,
.detach_client = smsc47m1_detach_client,
};
@@ -354,14 +344,7 @@
static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
-static int smsc47m1_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, smsc47m1_detect);
-}
-
-static int smsc47m1_find(int *address)
+static int __init smsc47m1_find(unsigned short *addr)
{
u8 val;
@@ -388,10 +371,10 @@
}
superio_select();
- *address = (superio_inb(SUPERIO_REG_BASE) << 8)
- | superio_inb(SUPERIO_REG_BASE + 1);
+ *addr = (superio_inb(SUPERIO_REG_BASE) << 8)
+ | superio_inb(SUPERIO_REG_BASE + 1);
val = superio_inb(SUPERIO_REG_ACT);
- if (*address == 0 || (val & 0x01) == 0) {
+ if (*addr == 0 || (val & 0x01) == 0) {
printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n");
superio_exit();
return -ENODEV;
@@ -401,17 +384,13 @@
return 0;
}
-static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind)
+static int smsc47m1_detect(struct i2c_adapter *adapter)
{
struct i2c_client *new_client;
struct smsc47m1_data *data;
int err = 0;
int fan1, fan2, pwm1, pwm2;
- if (!i2c_is_isa_adapter(adapter)) {
- return 0;
- }
-
if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) {
dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
return -EBUSY;
@@ -461,6 +440,13 @@
function. */
smsc47m1_update_device(&new_client->dev, 1);
+ /* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto error_detach;
+ }
+
if (fan1) {
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
@@ -494,6 +480,8 @@
return 0;
+error_detach:
+ i2c_detach_client(new_client);
error_free:
kfree(data);
error_release:
@@ -503,16 +491,16 @@
static int smsc47m1_detach_client(struct i2c_client *client)
{
+ struct smsc47m1_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
release_region(client->addr, SMSC_EXTENT);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -573,16 +561,16 @@
static int __init sm_smsc47m1_init(void)
{
- if (smsc47m1_find(normal_isa)) {
+ if (smsc47m1_find(&address)) {
return -ENODEV;
}
- return i2c_add_driver(&smsc47m1_driver);
+ return i2c_isa_add_driver(&smsc47m1_driver);
}
static void __exit sm_smsc47m1_exit(void)
{
- i2c_del_driver(&smsc47m1_driver);
+ i2c_isa_del_driver(&smsc47m1_driver);
}
MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 164d479..eb84997 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -35,7 +35,9 @@
#include <linux/pci.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
#include <linux/init.h>
#include <asm/io.h>
@@ -47,14 +49,10 @@
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
-/* Addresses to scan.
+/* Device address
Note that we can't determine the ISA address until we have initialized
our module */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
-
-/* Insmod parameters */
-SENSORS_INSMOD_1(via686a);
+static unsigned short address;
/*
The Via 686a southbridge has a LM78-like chip integrated on the same IC.
@@ -297,6 +295,7 @@
via686a client is allocated. */
struct via686a_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -315,8 +314,7 @@
static struct pci_dev *s_bridge; /* pointer to the (only) via686a */
-static int via686a_attach_adapter(struct i2c_adapter *adapter);
-static int via686a_detect(struct i2c_adapter *adapter, int address, int kind);
+static int via686a_detect(struct i2c_adapter *adapter);
static int via686a_detach_client(struct i2c_client *client);
static inline int via686a_read_value(struct i2c_client *client, u8 reg)
@@ -576,22 +574,13 @@
static struct i2c_driver via686a_driver = {
.owner = THIS_MODULE,
.name = "via686a",
- .id = I2C_DRIVERID_VIA686A,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = via686a_attach_adapter,
+ .attach_adapter = via686a_detect,
.detach_client = via686a_detach_client,
};
/* This is called when the module is loaded */
-static int via686a_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, via686a_detect);
-}
-
-static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
+static int via686a_detect(struct i2c_adapter *adapter)
{
struct i2c_client *new_client;
struct via686a_data *data;
@@ -599,13 +588,6 @@
const char client_name[] = "via686a";
u16 val;
- /* Make sure we are probing the ISA bus!! */
- if (!i2c_is_isa_adapter(adapter)) {
- dev_err(&adapter->dev,
- "via686a_detect called for an I2C bus adapter?!?\n");
- return 0;
- }
-
/* 8231 requires multiple of 256, we enforce that on 686 as well */
if (force_addr)
address = force_addr & 0xFF00;
@@ -637,7 +619,7 @@
if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
err = -ENOMEM;
- goto ERROR0;
+ goto exit_release;
}
memset(data, 0, sizeof(struct via686a_data));
@@ -655,12 +637,18 @@
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
- goto ERROR3;
+ goto exit_free;
/* Initialize the VIA686A chip */
via686a_init_client(new_client);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
@@ -695,25 +683,27 @@
return 0;
-ERROR3:
+exit_detach:
+ i2c_detach_client(new_client);
+exit_free:
kfree(data);
-ERROR0:
+exit_release:
release_region(address, VIA686A_EXTENT);
return err;
}
static int via686a_detach_client(struct i2c_client *client)
{
+ struct via686a_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
release_region(client->addr, VIA686A_EXTENT);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -810,29 +800,25 @@
const struct pci_device_id *id)
{
u16 val;
- int addr = 0;
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_word(dev, VIA686A_BASE_REG, &val))
return -ENODEV;
- addr = val & ~(VIA686A_EXTENT - 1);
- if (addr == 0 && force_addr == 0) {
+ address = val & ~(VIA686A_EXTENT - 1);
+ if (address == 0 && force_addr == 0) {
dev_err(&dev->dev, "base address not set - upgrade BIOS "
"or use force_addr=0xaddr\n");
return -ENODEV;
}
- if (force_addr)
- addr = force_addr; /* so detect will get called */
- if (!addr) {
+ if (!address) {
dev_err(&dev->dev, "No Via 686A sensors found.\n");
return -ENODEV;
}
- normal_isa[0] = addr;
s_bridge = pci_dev_get(dev);
- if (i2c_add_driver(&via686a_driver)) {
+ if (i2c_isa_add_driver(&via686a_driver)) {
pci_dev_put(s_bridge);
s_bridge = NULL;
}
@@ -859,7 +845,7 @@
{
pci_unregister_driver(&via686a_pci_driver);
if (s_bridge != NULL) {
- i2c_del_driver(&via686a_driver);
+ i2c_isa_del_driver(&via686a_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 8a40b69..b60efe8 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -9,6 +9,9 @@
Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help
in testing and debugging this driver.
+ This driver also supports the W83627EHG, which is the lead-free
+ version of the W83627EHF.
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -37,17 +40,14 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
#include <asm/io.h>
#include "lm75.h"
-/* Addresses to scan
- The actual ISA address is read from Super-I/O configuration space */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
-
-/* Insmod parameters */
-SENSORS_INSMOD_1(w83627ehf);
+/* The actual ISA address is read from Super-I/O configuration space */
+static unsigned short address;
/*
* Super-I/O constants and functions
@@ -174,6 +174,7 @@
struct w83627ehf_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
struct semaphore update_lock;
@@ -666,15 +667,12 @@
}
}
-static int w83627ehf_detect(struct i2c_adapter *adapter, int address, int kind)
+static int w83627ehf_detect(struct i2c_adapter *adapter)
{
struct i2c_client *client;
struct w83627ehf_data *data;
int i, err = 0;
- if (!i2c_is_isa_adapter(adapter))
- return 0;
-
if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) {
err = -EBUSY;
goto exit;
@@ -720,6 +718,12 @@
data->has_fan |= (1 << 4);
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&client->dev, &dev_attr_fan1_input);
device_create_file(&client->dev, &dev_attr_fan1_min);
device_create_file(&client->dev, &dev_attr_fan1_div);
@@ -753,6 +757,8 @@
return 0;
+exit_detach:
+ i2c_detach_client(client);
exit_free:
kfree(data);
exit_release:
@@ -761,24 +767,17 @@
return err;
}
-static int w83627ehf_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, w83627ehf_detect);
-}
-
static int w83627ehf_detach_client(struct i2c_client *client)
{
+ struct w83627ehf_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
release_region(client->addr, REGION_LENGTH);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -786,12 +785,11 @@
static struct i2c_driver w83627ehf_driver = {
.owner = THIS_MODULE,
.name = "w83627ehf",
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = w83627ehf_attach_adapter,
+ .attach_adapter = w83627ehf_detect,
.detach_client = w83627ehf_detach_client,
};
-static int __init w83627ehf_find(int sioaddr, int *address)
+static int __init w83627ehf_find(int sioaddr, unsigned short *addr)
{
u16 val;
@@ -809,8 +807,8 @@
superio_select(W83627EHF_LD_HWM);
val = (superio_inb(SIO_REG_ADDR) << 8)
| superio_inb(SIO_REG_ADDR + 1);
- *address = val & ~(REGION_LENGTH - 1);
- if (*address == 0) {
+ *addr = val & ~(REGION_LENGTH - 1);
+ if (*addr == 0) {
superio_exit();
return -ENODEV;
}
@@ -826,16 +824,16 @@
static int __init sensors_w83627ehf_init(void)
{
- if (w83627ehf_find(0x2e, &normal_isa[0])
- && w83627ehf_find(0x4e, &normal_isa[0]))
+ if (w83627ehf_find(0x2e, &address)
+ && w83627ehf_find(0x4e, &address))
return -ENODEV;
- return i2c_add_driver(&w83627ehf_driver);
+ return i2c_isa_add_driver(&w83627ehf_driver);
}
static void __exit sensors_w83627ehf_exit(void)
{
- i2c_del_driver(&w83627ehf_driver);
+ i2c_isa_del_driver(&w83627ehf_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index bd87a42..02bd5c0 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -42,8 +42,10 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
#include <asm/io.h>
#include "lm75.h"
@@ -56,12 +58,11 @@
MODULE_PARM_DESC(force_i2c,
"Initialize the i2c address of the sensors");
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+/* The actual ISA address is read from Super-I/O configuration space */
+static unsigned short address;
/* Insmod parameters */
-SENSORS_INSMOD_4(w83627hf, w83627thf, w83697hf, w83637hf);
+enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf };
static int init = 1;
module_param(init, bool, 0);
@@ -277,6 +278,7 @@
dynamically allocated, at the same time when a new client is allocated. */
struct w83627hf_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
enum chips type;
@@ -314,9 +316,7 @@
};
-static int w83627hf_attach_adapter(struct i2c_adapter *adapter);
-static int w83627hf_detect(struct i2c_adapter *adapter, int address,
- int kind);
+static int w83627hf_detect(struct i2c_adapter *adapter);
static int w83627hf_detach_client(struct i2c_client *client);
static int w83627hf_read_value(struct i2c_client *client, u16 register);
@@ -328,9 +328,7 @@
static struct i2c_driver w83627hf_driver = {
.owner = THIS_MODULE,
.name = "w83627hf",
- .id = I2C_DRIVERID_W83627HF,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = w83627hf_attach_adapter,
+ .attach_adapter = w83627hf_detect,
.detach_client = w83627hf_detach_client,
};
@@ -959,16 +957,7 @@
} while (0)
-/* This function is called when:
- * w83627hf_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and w83627hf_driver is still present) */
-static int w83627hf_attach_adapter(struct i2c_adapter *adapter)
-{
- return i2c_detect(adapter, &addr_data, w83627hf_detect);
-}
-
-static int w83627hf_find(int sioaddr, int *address)
+static int __init w83627hf_find(int sioaddr, unsigned short *addr)
{
u16 val;
@@ -988,32 +977,24 @@
superio_select(W83627HF_LD_HWM);
val = (superio_inb(WINB_BASE_REG) << 8) |
superio_inb(WINB_BASE_REG + 1);
- *address = val & ~(WINB_EXTENT - 1);
- if (*address == 0 && force_addr == 0) {
+ *addr = val & ~(WINB_EXTENT - 1);
+ if (*addr == 0 && force_addr == 0) {
superio_exit();
return -ENODEV;
}
- if (force_addr)
- *address = force_addr; /* so detect will get called */
superio_exit();
return 0;
}
-int w83627hf_detect(struct i2c_adapter *adapter, int address,
- int kind)
+static int w83627hf_detect(struct i2c_adapter *adapter)
{
- int val;
+ int val, kind;
struct i2c_client *new_client;
struct w83627hf_data *data;
int err = 0;
const char *client_name = "";
- if (!i2c_is_isa_adapter(adapter)) {
- err = -ENODEV;
- goto ERROR0;
- }
-
if(force_addr)
address = force_addr & ~(WINB_EXTENT - 1);
@@ -1102,6 +1083,12 @@
data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3));
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR3;
+ }
+
device_create_file_in(new_client, 0);
if (kind != w83697hf)
device_create_file_in(new_client, 1);
@@ -1152,6 +1139,8 @@
return 0;
+ ERROR3:
+ i2c_detach_client(new_client);
ERROR2:
kfree(data);
ERROR1:
@@ -1162,16 +1151,16 @@
static int w83627hf_detach_client(struct i2c_client *client)
{
+ struct w83627hf_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
release_region(client->addr, WINB_EXTENT);
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
@@ -1327,7 +1316,7 @@
data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
} else {
/* Convert VID to voltage based on default VRM */
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
}
tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
@@ -1485,20 +1474,17 @@
static int __init sensors_w83627hf_init(void)
{
- int addr;
-
- if (w83627hf_find(0x2e, &addr)
- && w83627hf_find(0x4e, &addr)) {
+ if (w83627hf_find(0x2e, &address)
+ && w83627hf_find(0x4e, &address)) {
return -ENODEV;
}
- normal_isa[0] = addr;
- return i2c_add_driver(&w83627hf_driver);
+ return i2c_isa_add_driver(&w83627hf_driver);
}
static void __exit sensors_w83627hf_exit(void)
{
- i2c_del_driver(&w83627hf_driver);
+ i2c_isa_del_driver(&w83627hf_driver);
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 0bb131c..4c43337 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -38,8 +38,10 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
#include <asm/io.h>
#include "lm75.h"
@@ -47,10 +49,10 @@
static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+static unsigned short isa_address = 0x290;
/* Insmod parameters */
-SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
+I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
@@ -218,6 +220,7 @@
allocated. */
struct w83781d_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore lock;
enum chips type;
@@ -255,6 +258,7 @@
};
static int w83781d_attach_adapter(struct i2c_adapter *adapter);
+static int w83781d_isa_attach_adapter(struct i2c_adapter *adapter);
static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
static int w83781d_detach_client(struct i2c_client *client);
@@ -273,6 +277,14 @@
.detach_client = w83781d_detach_client,
};
+static struct i2c_driver w83781d_isa_driver = {
+ .owner = THIS_MODULE,
+ .name = "w83781d-isa",
+ .attach_adapter = w83781d_isa_attach_adapter,
+ .detach_client = w83781d_detach_client,
+};
+
+
/* following are the sysfs callback functions */
#define show_in_reg(reg) \
static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
@@ -856,7 +868,13 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, w83781d_detect);
+ return i2c_probe(adapter, &addr_data, w83781d_detect);
+}
+
+static int
+w83781d_isa_attach_adapter(struct i2c_adapter *adapter)
+{
+ return w83781d_detect(adapter, isa_address, -1);
}
/* Assumes that adapter is of I2C, not ISA variety.
@@ -961,10 +979,10 @@
ERROR_SC_3:
i2c_detach_client(data->lm75[0]);
ERROR_SC_2:
- if (NULL != data->lm75[1])
+ if (data->lm75[1])
kfree(data->lm75[1]);
ERROR_SC_1:
- if (NULL != data->lm75[0])
+ if (data->lm75[0])
kfree(data->lm75[0]);
ERROR_SC_0:
return err;
@@ -999,7 +1017,7 @@
if (is_isa)
if (!request_region(address, W83781D_EXTENT,
- w83781d_driver.name)) {
+ w83781d_isa_driver.name)) {
dev_dbg(&adapter->dev, "Request of region "
"0x%x-0x%x for w83781d failed\n", address,
address + W83781D_EXTENT - 1);
@@ -1057,7 +1075,7 @@
new_client->addr = address;
init_MUTEX(&data->lock);
new_client->adapter = adapter;
- new_client->driver = &w83781d_driver;
+ new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. */
@@ -1189,6 +1207,12 @@
data->pwmenable[i] = 1;
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR4;
+ }
+
device_create_file_in(new_client, 0);
if (kind != w83783s)
device_create_file_in(new_client, 1);
@@ -1241,6 +1265,15 @@
return 0;
+ERROR4:
+ if (data->lm75[1]) {
+ i2c_detach_client(data->lm75[1]);
+ kfree(data->lm75[1]);
+ }
+ if (data->lm75[0]) {
+ i2c_detach_client(data->lm75[0]);
+ kfree(data->lm75[0]);
+ }
ERROR3:
i2c_detach_client(new_client);
ERROR2:
@@ -1255,24 +1288,26 @@
static int
w83781d_detach_client(struct i2c_client *client)
{
+ struct w83781d_data *data = i2c_get_clientdata(client);
int err;
+ /* main client */
+ if (data)
+ hwmon_device_unregister(data->class_dev);
+
if (i2c_is_isa_client(client))
release_region(client->addr, W83781D_EXTENT);
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
- if (i2c_get_clientdata(client)==NULL) {
- /* subclients */
+ /* main client */
+ if (data)
+ kfree(data);
+
+ /* subclient */
+ else
kfree(client);
- } else {
- /* main client */
- kfree(i2c_get_clientdata(client));
- }
return 0;
}
@@ -1443,7 +1478,7 @@
w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
}
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
if ((type != w83781d) && (type != as99127f)) {
tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
@@ -1613,12 +1648,25 @@
static int __init
sensors_w83781d_init(void)
{
- return i2c_add_driver(&w83781d_driver);
+ int res;
+
+ res = i2c_add_driver(&w83781d_driver);
+ if (res)
+ return res;
+
+ res = i2c_isa_add_driver(&w83781d_isa_driver);
+ if (res) {
+ i2c_del_driver(&w83781d_driver);
+ return res;
+ }
+
+ return 0;
}
static void __exit
sensors_w83781d_exit(void)
{
+ i2c_isa_del_driver(&w83781d_isa_driver);
i2c_del_driver(&w83781d_driver);
}
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
new file mode 100644
index 0000000..ba0c280
--- /dev/null
+++ b/drivers/hwmon/w83792d.c
@@ -0,0 +1,1649 @@
+/*
+ w83792d.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (C) 2004, 2005 Winbond Electronics Corp.
+ Chunhao Huang <DZShen@Winbond.com.tw>,
+ Rudolf Marek <r.marek@sh.cvut.cz>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ Note:
+ 1. This driver is only for 2.6 kernel, 2.4 kernel need a different driver.
+ 2. This driver is only for Winbond W83792D C version device, there
+ are also some motherboards with B version W83792D device. The
+ calculation method to in6-in7(measured value, limits) is a little
+ different between C and B version. C or B version can be identified
+ by CR[0x49h].
+*/
+
+/*
+ Supports following chips:
+
+ Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ w83792d 9 7 7 3 0x7a 0x5ca3 yes no
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(w83792d);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+ "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int init;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to one to force chip initialization");
+
+/* The W83792D registers */
+static const u8 W83792D_REG_IN[9] = {
+ 0x20, /* Vcore A in DataSheet */
+ 0x21, /* Vcore B in DataSheet */
+ 0x22, /* VIN0 in DataSheet */
+ 0x23, /* VIN1 in DataSheet */
+ 0x24, /* VIN2 in DataSheet */
+ 0x25, /* VIN3 in DataSheet */
+ 0x26, /* 5VCC in DataSheet */
+ 0xB0, /* 5VSB in DataSheet */
+ 0xB1 /* VBAT in DataSheet */
+};
+#define W83792D_REG_LOW_BITS1 0x3E /* Low Bits I in DataSheet */
+#define W83792D_REG_LOW_BITS2 0x3F /* Low Bits II in DataSheet */
+static const u8 W83792D_REG_IN_MAX[9] = {
+ 0x2B, /* Vcore A High Limit in DataSheet */
+ 0x2D, /* Vcore B High Limit in DataSheet */
+ 0x2F, /* VIN0 High Limit in DataSheet */
+ 0x31, /* VIN1 High Limit in DataSheet */
+ 0x33, /* VIN2 High Limit in DataSheet */
+ 0x35, /* VIN3 High Limit in DataSheet */
+ 0x37, /* 5VCC High Limit in DataSheet */
+ 0xB4, /* 5VSB High Limit in DataSheet */
+ 0xB6 /* VBAT High Limit in DataSheet */
+};
+static const u8 W83792D_REG_IN_MIN[9] = {
+ 0x2C, /* Vcore A Low Limit in DataSheet */
+ 0x2E, /* Vcore B Low Limit in DataSheet */
+ 0x30, /* VIN0 Low Limit in DataSheet */
+ 0x32, /* VIN1 Low Limit in DataSheet */
+ 0x34, /* VIN2 Low Limit in DataSheet */
+ 0x36, /* VIN3 Low Limit in DataSheet */
+ 0x38, /* 5VCC Low Limit in DataSheet */
+ 0xB5, /* 5VSB Low Limit in DataSheet */
+ 0xB7 /* VBAT Low Limit in DataSheet */
+};
+static const u8 W83792D_REG_FAN[7] = {
+ 0x28, /* FAN 1 Count in DataSheet */
+ 0x29, /* FAN 2 Count in DataSheet */
+ 0x2A, /* FAN 3 Count in DataSheet */
+ 0xB8, /* FAN 4 Count in DataSheet */
+ 0xB9, /* FAN 5 Count in DataSheet */
+ 0xBA, /* FAN 6 Count in DataSheet */
+ 0xBE /* FAN 7 Count in DataSheet */
+};
+static const u8 W83792D_REG_FAN_MIN[7] = {
+ 0x3B, /* FAN 1 Count Low Limit in DataSheet */
+ 0x3C, /* FAN 2 Count Low Limit in DataSheet */
+ 0x3D, /* FAN 3 Count Low Limit in DataSheet */
+ 0xBB, /* FAN 4 Count Low Limit in DataSheet */
+ 0xBC, /* FAN 5 Count Low Limit in DataSheet */
+ 0xBD, /* FAN 6 Count Low Limit in DataSheet */
+ 0xBF /* FAN 7 Count Low Limit in DataSheet */
+};
+#define W83792D_REG_FAN_CFG 0x84 /* FAN Configuration in DataSheet */
+static const u8 W83792D_REG_FAN_DIV[4] = {
+ 0x47, /* contains FAN2 and FAN1 Divisor */
+ 0x5B, /* contains FAN4 and FAN3 Divisor */
+ 0x5C, /* contains FAN6 and FAN5 Divisor */
+ 0x9E /* contains FAN7 Divisor. */
+};
+static const u8 W83792D_REG_PWM[7] = {
+ 0x81, /* FAN 1 Duty Cycle, be used to control */
+ 0x83, /* FAN 2 Duty Cycle, be used to control */
+ 0x94, /* FAN 3 Duty Cycle, be used to control */
+ 0xA3, /* FAN 4 Duty Cycle, be used to control */
+ 0xA4, /* FAN 5 Duty Cycle, be used to control */
+ 0xA5, /* FAN 6 Duty Cycle, be used to control */
+ 0xA6 /* FAN 7 Duty Cycle, be used to control */
+};
+#define W83792D_REG_BANK 0x4E
+#define W83792D_REG_TEMP2_CONFIG 0xC2
+#define W83792D_REG_TEMP3_CONFIG 0xCA
+
+static const u8 W83792D_REG_TEMP1[3] = {
+ 0x27, /* TEMP 1 in DataSheet */
+ 0x39, /* TEMP 1 Over in DataSheet */
+ 0x3A, /* TEMP 1 Hyst in DataSheet */
+};
+
+static const u8 W83792D_REG_TEMP_ADD[2][6] = {
+ { 0xC0, /* TEMP 2 in DataSheet */
+ 0xC1, /* TEMP 2(0.5 deg) in DataSheet */
+ 0xC5, /* TEMP 2 Over High part in DataSheet */
+ 0xC6, /* TEMP 2 Over Low part in DataSheet */
+ 0xC3, /* TEMP 2 Thyst High part in DataSheet */
+ 0xC4 }, /* TEMP 2 Thyst Low part in DataSheet */
+ { 0xC8, /* TEMP 3 in DataSheet */
+ 0xC9, /* TEMP 3(0.5 deg) in DataSheet */
+ 0xCD, /* TEMP 3 Over High part in DataSheet */
+ 0xCE, /* TEMP 3 Over Low part in DataSheet */
+ 0xCB, /* TEMP 3 Thyst High part in DataSheet */
+ 0xCC } /* TEMP 3 Thyst Low part in DataSheet */
+};
+
+static const u8 W83792D_REG_THERMAL[3] = {
+ 0x85, /* SmartFanI: Fan1 target value */
+ 0x86, /* SmartFanI: Fan2 target value */
+ 0x96 /* SmartFanI: Fan3 target value */
+};
+
+static const u8 W83792D_REG_TOLERANCE[3] = {
+ 0x87, /* (bit3-0)SmartFan Fan1 tolerance */
+ 0x87, /* (bit7-4)SmartFan Fan2 tolerance */
+ 0x97 /* (bit3-0)SmartFan Fan3 tolerance */
+};
+
+static const u8 W83792D_REG_POINTS[3][4] = {
+ { 0x85, /* SmartFanII: Fan1 temp point 1 */
+ 0xE3, /* SmartFanII: Fan1 temp point 2 */
+ 0xE4, /* SmartFanII: Fan1 temp point 3 */
+ 0xE5 }, /* SmartFanII: Fan1 temp point 4 */
+ { 0x86, /* SmartFanII: Fan2 temp point 1 */
+ 0xE6, /* SmartFanII: Fan2 temp point 2 */
+ 0xE7, /* SmartFanII: Fan2 temp point 3 */
+ 0xE8 }, /* SmartFanII: Fan2 temp point 4 */
+ { 0x96, /* SmartFanII: Fan3 temp point 1 */
+ 0xE9, /* SmartFanII: Fan3 temp point 2 */
+ 0xEA, /* SmartFanII: Fan3 temp point 3 */
+ 0xEB } /* SmartFanII: Fan3 temp point 4 */
+};
+
+static const u8 W83792D_REG_LEVELS[3][4] = {
+ { 0x88, /* (bit3-0) SmartFanII: Fan1 Non-Stop */
+ 0x88, /* (bit7-4) SmartFanII: Fan1 Level 1 */
+ 0xE0, /* (bit7-4) SmartFanII: Fan1 Level 2 */
+ 0xE0 }, /* (bit3-0) SmartFanII: Fan1 Level 3 */
+ { 0x89, /* (bit3-0) SmartFanII: Fan2 Non-Stop */
+ 0x89, /* (bit7-4) SmartFanII: Fan2 Level 1 */
+ 0xE1, /* (bit7-4) SmartFanII: Fan2 Level 2 */
+ 0xE1 }, /* (bit3-0) SmartFanII: Fan2 Level 3 */
+ { 0x98, /* (bit3-0) SmartFanII: Fan3 Non-Stop */
+ 0x98, /* (bit7-4) SmartFanII: Fan3 Level 1 */
+ 0xE2, /* (bit7-4) SmartFanII: Fan3 Level 2 */
+ 0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */
+};
+
+#define W83792D_REG_CONFIG 0x40
+#define W83792D_REG_VID_FANDIV 0x47
+#define W83792D_REG_CHIPID 0x49
+#define W83792D_REG_WCHIPID 0x58
+#define W83792D_REG_CHIPMAN 0x4F
+#define W83792D_REG_PIN 0x4B
+#define W83792D_REG_I2C_SUBADDR 0x4A
+
+#define W83792D_REG_ALARM1 0xA9 /* realtime status register1 */
+#define W83792D_REG_ALARM2 0xAA /* realtime status register2 */
+#define W83792D_REG_ALARM3 0xAB /* realtime status register3 */
+#define W83792D_REG_CHASSIS 0x42 /* Bit 5: Case Open status bit */
+#define W83792D_REG_CHASSIS_CLR 0x44 /* Bit 7: Case Open CLR_CHS/Reset bit */
+
+/* control in0/in1 's limit modifiability */
+#define W83792D_REG_VID_IN_B 0x17
+
+#define W83792D_REG_VBAT 0x5D
+#define W83792D_REG_I2C_ADDR 0x48
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+ variants. Note that you should be a bit careful with which arguments
+ these macros are called: arguments may be evaluated more than once.
+ Fixing this is just not worth it. */
+#define IN_FROM_REG(nr,val) (((nr)<=1)?(val*2): \
+ ((((nr)==6)||((nr)==7))?(val*6):(val*4)))
+#define IN_TO_REG(nr,val) (((nr)<=1)?(val/2): \
+ ((((nr)==6)||((nr)==7))?(val/6):(val/4)))
+
+static inline u8
+FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 255;
+ rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+ return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+#define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \
+ ((val) == 255 ? 0 : \
+ 1350000 / ((val) * (div))))
+
+/* for temp1 */
+#define TEMP1_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
+ : (val)) / 1000, 0, 0xff))
+#define TEMP1_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
+/* for temp2 and temp3, because they need addtional resolution */
+#define TEMP_ADD_FROM_REG(val1, val2) \
+ ((((val1) & 0x80 ? (val1)-0x100 \
+ : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0))
+#define TEMP_ADD_TO_REG_HIGH(val) \
+ (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
+ : (val)) / 1000, 0, 0xff))
+#define TEMP_ADD_TO_REG_LOW(val) ((val%1000) ? 0x80 : 0x00)
+
+#define PWM_FROM_REG(val) (val)
+#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+#define DIV_FROM_REG(val) (1 << (val))
+
+static inline u8
+DIV_TO_REG(long val)
+{
+ int i;
+ val = SENSORS_LIMIT(val, 1, 128) >> 1;
+ for (i = 0; i < 6; i++) {
+ if (val == 0)
+ break;
+ val >>= 1;
+ }
+ return ((u8) i);
+}
+
+struct w83792d_data {
+ struct i2c_client client;
+ struct class_device *class_dev;
+ struct semaphore lock;
+ enum chips type;
+
+ struct semaphore update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ /* array of 2 pointers to subclients */
+ struct i2c_client *lm75[2];
+
+ u8 in[9]; /* Register value */
+ u8 in_max[9]; /* Register value */
+ u8 in_min[9]; /* Register value */
+ u8 low_bits[2]; /* Additional resolution to voltage in0-6 */
+ u8 fan[7]; /* Register value */
+ u8 fan_min[7]; /* Register value */
+ u8 temp1[3]; /* current, over, thyst */
+ u8 temp_add[2][6]; /* Register value */
+ u8 fan_div[7]; /* Register encoding, shifted right */
+ u8 pwm[7]; /* We only consider the first 3 set of pwm,
+ although 792 chip has 7 set of pwm. */
+ u8 pwmenable[3];
+ u8 pwm_mode[7]; /* indicates PWM or DC mode: 1->PWM; 0->DC */
+ u32 alarms; /* realtime status register encoding,combined */
+ u8 chassis; /* Chassis status */
+ u8 chassis_clear; /* CLR_CHS, clear chassis intrusion detection */
+ u8 thermal_cruise[3]; /* Smart FanI: Fan1,2,3 target value */
+ u8 tolerance[3]; /* Fan1,2,3 tolerance(Smart Fan I/II) */
+ u8 sf2_points[3][4]; /* Smart FanII: Fan1,2,3 temperature points */
+ u8 sf2_levels[3][4]; /* Smart FanII: Fan1,2,3 duty cycle levels */
+};
+
+static int w83792d_attach_adapter(struct i2c_adapter *adapter);
+static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind);
+static int w83792d_detach_client(struct i2c_client *client);
+
+static int w83792d_read_value(struct i2c_client *client, u8 register);
+static int w83792d_write_value(struct i2c_client *client, u8 register,
+ u8 value);
+static struct w83792d_data *w83792d_update_device(struct device *dev);
+
+#ifdef DEBUG
+static void w83792d_print_debug(struct w83792d_data *data, struct device *dev);
+#endif
+
+static void w83792d_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83792d_driver = {
+ .owner = THIS_MODULE,
+ .name = "w83792d",
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = w83792d_attach_adapter,
+ .detach_client = w83792d_detach_client,
+};
+
+static long in_count_from_reg(int nr, struct w83792d_data *data)
+{
+ u16 vol_count = data->in[nr];
+ u16 low_bits = 0;
+ vol_count = (vol_count << 2);
+ switch (nr)
+ {
+ case 0: /* vin0 */
+ low_bits = (data->low_bits[0]) & 0x03;
+ break;
+ case 1: /* vin1 */
+ low_bits = ((data->low_bits[0]) & 0x0c) >> 2;
+ break;
+ case 2: /* vin2 */
+ low_bits = ((data->low_bits[0]) & 0x30) >> 4;
+ break;
+ case 3: /* vin3 */
+ low_bits = ((data->low_bits[0]) & 0xc0) >> 6;
+ break;
+ case 4: /* vin4 */
+ low_bits = (data->low_bits[1]) & 0x03;
+ break;
+ case 5: /* vin5 */
+ low_bits = ((data->low_bits[1]) & 0x0c) >> 2;
+ break;
+ case 6: /* vin6 */
+ low_bits = ((data->low_bits[1]) & 0x30) >> 4;
+ default:
+ break;
+ }
+ vol_count = vol_count | low_bits;
+ return vol_count;
+}
+
+/* following are the sysfs callback functions */
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf,"%ld\n", IN_FROM_REG(nr,(in_count_from_reg(nr, data))));
+}
+
+#define show_in_reg(reg) \
+static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index; \
+ struct w83792d_data *data = w83792d_update_device(dev); \
+ return sprintf(buf,"%ld\n", (long)(IN_FROM_REG(nr, (data->reg[nr])*4))); \
+}
+
+show_in_reg(in_min);
+show_in_reg(in_max);
+
+#define store_in_reg(REG, reg) \
+static ssize_t store_in_##reg (struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index; \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct w83792d_data *data = i2c_get_clientdata(client); \
+ u32 val; \
+ \
+ val = simple_strtoul(buf, NULL, 10); \
+ data->in_##reg[nr] = SENSORS_LIMIT(IN_TO_REG(nr, val)/4, 0, 255); \
+ w83792d_write_value(client, W83792D_REG_IN_##REG[nr], data->in_##reg[nr]); \
+ \
+ return count; \
+}
+store_in_reg(MIN, min);
+store_in_reg(MAX, max);
+
+#define sysfs_in_reg(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in, \
+ NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, store_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, store_in_max, offset);
+
+sysfs_in_reg(0);
+sysfs_in_reg(1);
+sysfs_in_reg(2);
+sysfs_in_reg(3);
+sysfs_in_reg(4);
+sysfs_in_reg(5);
+sysfs_in_reg(6);
+sysfs_in_reg(7);
+sysfs_in_reg(8);
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_in##offset##_input.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_in##offset##_max.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_in##offset##_min.dev_attr); \
+} while (0)
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index - 1; \
+ struct w83792d_data *data = w83792d_update_device(dev); \
+ return sprintf(buf,"%d\n", \
+ FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \
+}
+
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ w83792d_write_value(client, W83792D_REG_FAN_MIN[nr],
+ data->fan_min[nr]);
+
+ return count;
+}
+
+static ssize_t
+show_fan_div(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr - 1]));
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+ determined in part by the fan divisor. This follows the principle of
+ least suprise; the user doesn't expect the fan minimum to change just
+ because the divisor changed. */
+static ssize_t
+store_fan_div(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ unsigned long min;
+ /*u8 reg;*/
+ u8 fan_div_reg = 0;
+ u8 tmp_fan_div;
+
+ /* Save fan_min */
+ min = FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr]));
+
+ data->fan_div[nr] = DIV_TO_REG(simple_strtoul(buf, NULL, 10));
+
+ fan_div_reg = w83792d_read_value(client, W83792D_REG_FAN_DIV[nr >> 1]);
+ fan_div_reg &= (nr & 0x01) ? 0x8f : 0xf8;
+ tmp_fan_div = (nr & 0x01) ? (((data->fan_div[nr]) << 4) & 0x70)
+ : ((data->fan_div[nr]) & 0x07);
+ w83792d_write_value(client, W83792D_REG_FAN_DIV[nr >> 1],
+ fan_div_reg | tmp_fan_div);
+
+ /* Restore fan_min */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], data->fan_min[nr]);
+
+ return count;
+}
+
+#define sysfs_fan(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \
+ offset); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, store_fan_div, offset); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, store_fan_min, offset);
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+sysfs_fan(4);
+sysfs_fan(5);
+sysfs_fan(6);
+sysfs_fan(7);
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_input.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_div.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_min.dev_attr); \
+} while (0)
+
+
+/* read/write the temperature1, includes measured value and limits */
+
+static ssize_t show_temp1(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[nr]));
+}
+
+static ssize_t store_temp1(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ s32 val;
+
+ val = simple_strtol(buf, NULL, 10);
+
+ data->temp1[nr] = TEMP1_TO_REG(val);
+ w83792d_write_value(client, W83792D_REG_TEMP1[nr],
+ data->temp1[nr]);
+
+ return count;
+}
+
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1,
+ store_temp1, 1);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1,
+ store_temp1, 2);
+
+#define device_create_file_temp1(client) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_temp1_max_hyst.dev_attr); \
+} while (0)
+
+
+/* read/write the temperature2-3, includes measured value and limits */
+
+static ssize_t show_temp23(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf,"%ld\n",
+ (long)TEMP_ADD_FROM_REG(data->temp_add[nr][index],
+ data->temp_add[nr][index+1]));
+}
+
+static ssize_t store_temp23(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ s32 val;
+
+ val = simple_strtol(buf, NULL, 10);
+
+ data->temp_add[nr][index] = TEMP_ADD_TO_REG_HIGH(val);
+ data->temp_add[nr][index+1] = TEMP_ADD_TO_REG_LOW(val);
+ w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index],
+ data->temp_add[nr][index]);
+ w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index+1],
+ data->temp_add[nr][index+1]);
+
+ return count;
+}
+
+#define sysfs_temp23(name,idx) \
+static SENSOR_DEVICE_ATTR_2(name##_input, S_IRUGO, show_temp23, NULL, \
+ idx, 0); \
+static SENSOR_DEVICE_ATTR_2(name##_max, S_IRUGO | S_IWUSR, \
+ show_temp23, store_temp23, idx, 2); \
+static SENSOR_DEVICE_ATTR_2(name##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp23, store_temp23, idx, 4);
+
+sysfs_temp23(temp2,0)
+sysfs_temp23(temp3,1)
+
+#define device_create_file_temp_add(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_input.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_max.dev_attr); \
+device_create_file(&client->dev, \
+&sensor_dev_attr_temp##offset##_max_hyst.dev_attr); \
+} while (0)
+
+
+/* get reatime status of all sensors items: voltage, temp, fan */
+static ssize_t
+show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%d\n", data->alarms);
+}
+
+static
+DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms);
+
+
+
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr-1]));
+}
+
+static ssize_t
+show_pwmenable(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index - 1;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ long pwm_enable_tmp = 1;
+
+ switch (data->pwmenable[nr]) {
+ case 0:
+ pwm_enable_tmp = 1; /* manual mode */
+ break;
+ case 1:
+ pwm_enable_tmp = 3; /*thermal cruise/Smart Fan I */
+ break;
+ case 2:
+ pwm_enable_tmp = 2; /* Smart Fan II */
+ break;
+ }
+
+ return sprintf(buf, "%ld\n", pwm_enable_tmp);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+ data->pwm[nr] = PWM_TO_REG(val);
+ w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
+
+ return count;
+}
+
+static ssize_t
+store_pwmenable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+ u8 fan_cfg_tmp, cfg1_tmp, cfg2_tmp, cfg3_tmp, cfg4_tmp;
+
+ val = simple_strtoul(buf, NULL, 10);
+ switch (val) {
+ case 1:
+ data->pwmenable[nr] = 0; /* manual mode */
+ break;
+ case 2:
+ data->pwmenable[nr] = 2; /* Smart Fan II */
+ break;
+ case 3:
+ data->pwmenable[nr] = 1; /* thermal cruise/Smart Fan I */
+ break;
+ default:
+ return -EINVAL;
+ }
+ cfg1_tmp = data->pwmenable[0];
+ cfg2_tmp = (data->pwmenable[1]) << 2;
+ cfg3_tmp = (data->pwmenable[2]) << 4;
+ cfg4_tmp = w83792d_read_value(client,W83792D_REG_FAN_CFG) & 0xc0;
+ fan_cfg_tmp = ((cfg4_tmp | cfg3_tmp) | cfg2_tmp) | cfg1_tmp;
+ w83792d_write_value(client, W83792D_REG_FAN_CFG, fan_cfg_tmp);
+
+ return count;
+}
+
+#define sysfs_pwm(offset) \
+static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_pwm, store_pwm, offset); \
+static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+ show_pwmenable, store_pwmenable, offset); \
+
+sysfs_pwm(1);
+sysfs_pwm(2);
+sysfs_pwm(3);
+
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_pwm##offset.dev_attr); \
+} while (0)
+
+#define device_create_file_pwmenable(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_enable.dev_attr); \
+} while (0)
+
+
+static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm_mode[nr-1]);
+}
+
+static ssize_t
+store_pwm_mode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+ u8 pwm_mode_mask = 0;
+
+ val = simple_strtoul(buf, NULL, 10);
+ data->pwm_mode[nr] = SENSORS_LIMIT(val, 0, 1);
+ pwm_mode_mask = w83792d_read_value(client,
+ W83792D_REG_PWM[nr]) & 0x7f;
+ w83792d_write_value(client, W83792D_REG_PWM[nr],
+ ((data->pwm_mode[nr]) << 7) | pwm_mode_mask);
+
+ return count;
+}
+
+#define sysfs_pwm_mode(offset) \
+static SENSOR_DEVICE_ATTR(pwm##offset##_mode, S_IRUGO | S_IWUSR, \
+ show_pwm_mode, store_pwm_mode, offset);
+
+sysfs_pwm_mode(1);
+sysfs_pwm_mode(2);
+sysfs_pwm_mode(3);
+
+#define device_create_file_pwm_mode(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_mode.dev_attr); \
+} while (0)
+
+
+static ssize_t
+show_regs_chassis(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%d\n", data->chassis);
+}
+
+static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
+
+#define device_create_file_chassis(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_chassis); \
+} while (0)
+
+
+static ssize_t
+show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%d\n", data->chassis_clear);
+}
+
+static ssize_t
+store_chassis_clear(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+ u8 temp1 = 0, temp2 = 0;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ data->chassis_clear = SENSORS_LIMIT(val, 0 ,1);
+ temp1 = ((data->chassis_clear) << 7) & 0x80;
+ temp2 = w83792d_read_value(client,
+ W83792D_REG_CHASSIS_CLR) & 0x7f;
+ w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, temp1 | temp2);
+
+ return count;
+}
+
+static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
+ show_chassis_clear, store_chassis_clear);
+
+#define device_create_file_chassis_clear(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_chassis_clear); \
+} while (0)
+
+
+
+/* For Smart Fan I / Thermal Cruise */
+static ssize_t
+show_thermal_cruise(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)data->thermal_cruise[nr-1]);
+}
+
+static ssize_t
+store_thermal_cruise(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+ u8 target_tmp=0, target_mask=0;
+
+ val = simple_strtoul(buf, NULL, 10);
+ target_tmp = val;
+ target_tmp = target_tmp & 0x7f;
+ target_mask = w83792d_read_value(client, W83792D_REG_THERMAL[nr]) & 0x80;
+ data->thermal_cruise[nr] = SENSORS_LIMIT(target_tmp, 0, 255);
+ w83792d_write_value(client, W83792D_REG_THERMAL[nr],
+ (data->thermal_cruise[nr]) | target_mask);
+
+ return count;
+}
+
+#define sysfs_thermal_cruise(offset) \
+static SENSOR_DEVICE_ATTR(thermal_cruise##offset, S_IRUGO | S_IWUSR, \
+ show_thermal_cruise, store_thermal_cruise, offset);
+
+sysfs_thermal_cruise(1);
+sysfs_thermal_cruise(2);
+sysfs_thermal_cruise(3);
+
+#define device_create_file_thermal_cruise(client, offset) \
+do { \
+device_create_file(&client->dev, \
+&sensor_dev_attr_thermal_cruise##offset.dev_attr); \
+} while (0)
+
+
+/* For Smart Fan I/Thermal Cruise and Smart Fan II */
+static ssize_t
+show_tolerance(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)data->tolerance[nr-1]);
+}
+
+static ssize_t
+store_tolerance(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+ u8 tol_tmp, tol_mask;
+
+ val = simple_strtoul(buf, NULL, 10);
+ tol_mask = w83792d_read_value(client,
+ W83792D_REG_TOLERANCE[nr]) & ((nr == 1) ? 0x0f : 0xf0);
+ tol_tmp = SENSORS_LIMIT(val, 0, 15);
+ tol_tmp &= 0x0f;
+ data->tolerance[nr] = tol_tmp;
+ if (nr == 1) {
+ tol_tmp <<= 4;
+ }
+ w83792d_write_value(client, W83792D_REG_TOLERANCE[nr],
+ tol_mask | tol_tmp);
+
+ return count;
+}
+
+#define sysfs_tolerance(offset) \
+static SENSOR_DEVICE_ATTR(tolerance##offset, S_IRUGO | S_IWUSR, \
+ show_tolerance, store_tolerance, offset);
+
+sysfs_tolerance(1);
+sysfs_tolerance(2);
+sysfs_tolerance(3);
+
+#define device_create_file_tolerance(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_tolerance##offset.dev_attr); \
+} while (0)
+
+
+/* For Smart Fan II */
+static ssize_t
+show_sf2_point(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)data->sf2_points[index-1][nr-1]);
+}
+
+static ssize_t
+store_sf2_point(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr - 1;
+ int index = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+ u8 mask_tmp = 0;
+
+ val = simple_strtoul(buf, NULL, 10);
+ data->sf2_points[index][nr] = SENSORS_LIMIT(val, 0, 127);
+ mask_tmp = w83792d_read_value(client,
+ W83792D_REG_POINTS[index][nr]) & 0x80;
+ w83792d_write_value(client, W83792D_REG_POINTS[index][nr],
+ mask_tmp|data->sf2_points[index][nr]);
+
+ return count;
+}
+
+#define sysfs_sf2_point(offset, index) \
+static SENSOR_DEVICE_ATTR_2(sf2_point##offset##_fan##index, S_IRUGO | S_IWUSR, \
+ show_sf2_point, store_sf2_point, offset, index);
+
+sysfs_sf2_point(1, 1); /* Fan1 */
+sysfs_sf2_point(2, 1); /* Fan1 */
+sysfs_sf2_point(3, 1); /* Fan1 */
+sysfs_sf2_point(4, 1); /* Fan1 */
+sysfs_sf2_point(1, 2); /* Fan2 */
+sysfs_sf2_point(2, 2); /* Fan2 */
+sysfs_sf2_point(3, 2); /* Fan2 */
+sysfs_sf2_point(4, 2); /* Fan2 */
+sysfs_sf2_point(1, 3); /* Fan3 */
+sysfs_sf2_point(2, 3); /* Fan3 */
+sysfs_sf2_point(3, 3); /* Fan3 */
+sysfs_sf2_point(4, 3); /* Fan3 */
+
+#define device_create_file_sf2_point(client, offset, index) \
+do { \
+device_create_file(&client->dev, \
+&sensor_dev_attr_sf2_point##offset##_fan##index.dev_attr); \
+} while (0)
+
+
+static ssize_t
+show_sf2_level(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%d\n",
+ (((data->sf2_levels[index-1][nr]) * 100) / 15));
+}
+
+static ssize_t
+store_sf2_level(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index - 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ u32 val;
+ u8 mask_tmp=0, level_tmp=0;
+
+ val = simple_strtoul(buf, NULL, 10);
+ data->sf2_levels[index][nr] = SENSORS_LIMIT((val * 15) / 100, 0, 15);
+ mask_tmp = w83792d_read_value(client, W83792D_REG_LEVELS[index][nr])
+ & ((nr==3) ? 0xf0 : 0x0f);
+ if (nr==3) {
+ level_tmp = data->sf2_levels[index][nr];
+ } else {
+ level_tmp = data->sf2_levels[index][nr] << 4;
+ }
+ w83792d_write_value(client, W83792D_REG_LEVELS[index][nr], level_tmp | mask_tmp);
+
+ return count;
+}
+
+#define sysfs_sf2_level(offset, index) \
+static SENSOR_DEVICE_ATTR_2(sf2_level##offset##_fan##index, S_IRUGO | S_IWUSR, \
+ show_sf2_level, store_sf2_level, offset, index);
+
+sysfs_sf2_level(1, 1); /* Fan1 */
+sysfs_sf2_level(2, 1); /* Fan1 */
+sysfs_sf2_level(3, 1); /* Fan1 */
+sysfs_sf2_level(1, 2); /* Fan2 */
+sysfs_sf2_level(2, 2); /* Fan2 */
+sysfs_sf2_level(3, 2); /* Fan2 */
+sysfs_sf2_level(1, 3); /* Fan3 */
+sysfs_sf2_level(2, 3); /* Fan3 */
+sysfs_sf2_level(3, 3); /* Fan3 */
+
+#define device_create_file_sf2_level(client, offset, index) \
+do { \
+device_create_file(&client->dev, \
+&sensor_dev_attr_sf2_level##offset##_fan##index.dev_attr); \
+} while (0)
+
+
+/* This function is called when:
+ * w83792d_driver is inserted (when this module is loaded), for each
+ available adapter
+ * when a new adapter is inserted (and w83792d_driver is still present) */
+static int
+w83792d_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, w83792d_detect);
+}
+
+
+static int
+w83792d_create_subclient(struct i2c_adapter *adapter,
+ struct i2c_client *new_client, int addr,
+ struct i2c_client **sub_cli)
+{
+ int err;
+ struct i2c_client *sub_client;
+
+ (*sub_cli) = sub_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (!(sub_client)) {
+ return -ENOMEM;
+ }
+ memset(sub_client, 0x00, sizeof(struct i2c_client));
+ sub_client->addr = 0x48 + addr;
+ i2c_set_clientdata(sub_client, NULL);
+ sub_client->adapter = adapter;
+ sub_client->driver = &w83792d_driver;
+ sub_client->flags = 0;
+ strlcpy(sub_client->name, "w83792d subclient", I2C_NAME_SIZE);
+ if ((err = i2c_attach_client(sub_client))) {
+ dev_err(&new_client->dev, "subclient registration "
+ "at address 0x%x failed\n", sub_client->addr);
+ kfree(sub_client);
+ return err;
+ }
+ return 0;
+}
+
+
+static int
+w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
+ struct i2c_client *new_client)
+{
+ int i, id, err;
+ u8 val;
+ struct w83792d_data *data = i2c_get_clientdata(new_client);
+
+ id = i2c_adapter_id(adapter);
+ if (force_subclients[0] == id && force_subclients[1] == address) {
+ for (i = 2; i <= 3; i++) {
+ if (force_subclients[i] < 0x48 ||
+ force_subclients[i] > 0x4f) {
+ dev_err(&new_client->dev, "invalid subclient "
+ "address %d; must be 0x48-0x4f\n",
+ force_subclients[i]);
+ err = -ENODEV;
+ goto ERROR_SC_0;
+ }
+ }
+ w83792d_write_value(new_client, W83792D_REG_I2C_SUBADDR,
+ (force_subclients[2] & 0x07) |
+ ((force_subclients[3] & 0x07) << 4));
+ }
+
+ val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR);
+ if (!(val & 0x08)) {
+ err = w83792d_create_subclient(adapter, new_client, val & 0x7,
+ &data->lm75[0]);
+ if (err < 0)
+ goto ERROR_SC_0;
+ }
+ if (!(val & 0x80)) {
+ if ((data->lm75[0] != NULL) &&
+ ((val & 0x7) == ((val >> 4) & 0x7))) {
+ dev_err(&new_client->dev, "duplicate addresses 0x%x, "
+ "use force_subclient\n", data->lm75[0]->addr);
+ err = -ENODEV;
+ goto ERROR_SC_1;
+ }
+ err = w83792d_create_subclient(adapter, new_client,
+ (val >> 4) & 0x7, &data->lm75[1]);
+ if (err < 0)
+ goto ERROR_SC_1;
+ }
+
+ return 0;
+
+/* Undo inits in case of errors */
+
+ERROR_SC_1:
+ if (data->lm75[0] != NULL) {
+ i2c_detach_client(data->lm75[0]);
+ kfree(data->lm75[0]);
+ }
+ERROR_SC_0:
+ return err;
+}
+
+
+static int
+w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ int i = 0, val1 = 0, val2;
+ struct i2c_client *new_client;
+ struct w83792d_data *data;
+ int err = 0;
+ const char *client_name = "";
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ goto ERROR0;
+ }
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access w83792d_{read,write}_value. */
+
+ if (!(data = kmalloc(sizeof(struct w83792d_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto ERROR0;
+ }
+ memset(data, 0, sizeof(struct w83792d_data));
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ init_MUTEX(&data->lock);
+ new_client->adapter = adapter;
+ new_client->driver = &w83792d_driver;
+ new_client->flags = 0;
+
+ /* Now, we do the remaining detection. */
+
+ /* The w83792d may be stuck in some other bank than bank 0. This may
+ make reading other information impossible. Specify a force=... or
+ force_*=... parameter, and the Winbond will be reset to the right
+ bank. */
+ if (kind < 0) {
+ if (w83792d_read_value(new_client, W83792D_REG_CONFIG) & 0x80) {
+ dev_warn(&new_client->dev, "Detection failed at step "
+ "3\n");
+ goto ERROR1;
+ }
+ val1 = w83792d_read_value(new_client, W83792D_REG_BANK);
+ val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN);
+ /* Check for Winbond ID if in bank 0 */
+ if (!(val1 & 0x07)) { /* is Bank0 */
+ if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
+ ((val1 & 0x80) && (val2 != 0x5c))) {
+ goto ERROR1;
+ }
+ }
+ /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
+ should match */
+ if (w83792d_read_value(new_client,
+ W83792D_REG_I2C_ADDR) != address) {
+ dev_warn(&new_client->dev, "Detection failed "
+ "at step 5\n");
+ goto ERROR1;
+ }
+ }
+
+ /* We have either had a force parameter, or we have already detected the
+ Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ w83792d_write_value(new_client,
+ W83792D_REG_BANK,
+ (w83792d_read_value(new_client,
+ W83792D_REG_BANK) & 0x78) | 0x80);
+
+ /* Determine the chip type. */
+ if (kind <= 0) {
+ /* get vendor ID */
+ val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN);
+ if (val2 != 0x5c) { /* the vendor is NOT Winbond */
+ goto ERROR1;
+ }
+ val1 = w83792d_read_value(new_client, W83792D_REG_WCHIPID);
+ if (val1 == 0x7a && address >= 0x2c) {
+ kind = w83792d;
+ } else {
+ if (kind == 0)
+ dev_warn(&new_client->dev,
+ "w83792d: Ignoring 'force' parameter for"
+ " unknown chip at adapter %d, address"
+ " 0x%02x\n", i2c_adapter_id(adapter),
+ address);
+ goto ERROR1;
+ }
+ }
+
+ if (kind == w83792d) {
+ client_name = "w83792d";
+ } else {
+ dev_err(&new_client->dev, "w83792d: Internal error: unknown"
+ " kind (%d)?!?", kind);
+ goto ERROR1;
+ }
+
+ /* Fill in the remaining client fields and put into the global list */
+ strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+ data->type = kind;
+
+ data->valid = 0;
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto ERROR1;
+
+ if ((err = w83792d_detect_subclients(adapter, address,
+ kind, new_client)))
+ goto ERROR2;
+
+ /* Initialize the chip */
+ w83792d_init_client(new_client);
+
+ /* A few vars need to be filled upon startup */
+ for (i = 1; i <= 7; i++) {
+ data->fan_min[i - 1] = w83792d_read_value(new_client,
+ W83792D_REG_FAN_MIN[i]);
+ }
+
+ /* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR3;
+ }
+ device_create_file_in(new_client, 0);
+ device_create_file_in(new_client, 1);
+ device_create_file_in(new_client, 2);
+ device_create_file_in(new_client, 3);
+ device_create_file_in(new_client, 4);
+ device_create_file_in(new_client, 5);
+ device_create_file_in(new_client, 6);
+ device_create_file_in(new_client, 7);
+ device_create_file_in(new_client, 8);
+
+ device_create_file_fan(new_client, 1);
+ device_create_file_fan(new_client, 2);
+ device_create_file_fan(new_client, 3);
+ device_create_file_fan(new_client, 4);
+ device_create_file_fan(new_client, 5);
+ device_create_file_fan(new_client, 6);
+ device_create_file_fan(new_client, 7);
+
+ device_create_file_temp1(new_client); /* Temp1 */
+ device_create_file_temp_add(new_client, 2); /* Temp2 */
+ device_create_file_temp_add(new_client, 3); /* Temp3 */
+
+ device_create_file_alarms(new_client);
+
+ device_create_file_pwm(new_client, 1);
+ device_create_file_pwm(new_client, 2);
+ device_create_file_pwm(new_client, 3);
+
+ device_create_file_pwmenable(new_client, 1);
+ device_create_file_pwmenable(new_client, 2);
+ device_create_file_pwmenable(new_client, 3);
+
+ device_create_file_pwm_mode(new_client, 1);
+ device_create_file_pwm_mode(new_client, 2);
+ device_create_file_pwm_mode(new_client, 3);
+
+ device_create_file_chassis(new_client);
+ device_create_file_chassis_clear(new_client);
+
+ device_create_file_thermal_cruise(new_client, 1);
+ device_create_file_thermal_cruise(new_client, 2);
+ device_create_file_thermal_cruise(new_client, 3);
+
+ device_create_file_tolerance(new_client, 1);
+ device_create_file_tolerance(new_client, 2);
+ device_create_file_tolerance(new_client, 3);
+
+ device_create_file_sf2_point(new_client, 1, 1); /* Fan1 */
+ device_create_file_sf2_point(new_client, 2, 1); /* Fan1 */
+ device_create_file_sf2_point(new_client, 3, 1); /* Fan1 */
+ device_create_file_sf2_point(new_client, 4, 1); /* Fan1 */
+ device_create_file_sf2_point(new_client, 1, 2); /* Fan2 */
+ device_create_file_sf2_point(new_client, 2, 2); /* Fan2 */
+ device_create_file_sf2_point(new_client, 3, 2); /* Fan2 */
+ device_create_file_sf2_point(new_client, 4, 2); /* Fan2 */
+ device_create_file_sf2_point(new_client, 1, 3); /* Fan3 */
+ device_create_file_sf2_point(new_client, 2, 3); /* Fan3 */
+ device_create_file_sf2_point(new_client, 3, 3); /* Fan3 */
+ device_create_file_sf2_point(new_client, 4, 3); /* Fan3 */
+
+ device_create_file_sf2_level(new_client, 1, 1); /* Fan1 */
+ device_create_file_sf2_level(new_client, 2, 1); /* Fan1 */
+ device_create_file_sf2_level(new_client, 3, 1); /* Fan1 */
+ device_create_file_sf2_level(new_client, 1, 2); /* Fan2 */
+ device_create_file_sf2_level(new_client, 2, 2); /* Fan2 */
+ device_create_file_sf2_level(new_client, 3, 2); /* Fan2 */
+ device_create_file_sf2_level(new_client, 1, 3); /* Fan3 */
+ device_create_file_sf2_level(new_client, 2, 3); /* Fan3 */
+ device_create_file_sf2_level(new_client, 3, 3); /* Fan3 */
+
+ return 0;
+
+ERROR3:
+ if (data->lm75[0] != NULL) {
+ i2c_detach_client(data->lm75[0]);
+ kfree(data->lm75[0]);
+ }
+ if (data->lm75[1] != NULL) {
+ i2c_detach_client(data->lm75[1]);
+ kfree(data->lm75[1]);
+ }
+ERROR2:
+ i2c_detach_client(new_client);
+ERROR1:
+ kfree(data);
+ERROR0:
+ return err;
+}
+
+static int
+w83792d_detach_client(struct i2c_client *client)
+{
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ int err;
+
+ /* main client */
+ if (data)
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ /* main client */
+ if (data)
+ kfree(data);
+ /* subclient */
+ else
+ kfree(client);
+
+ return 0;
+}
+
+/* The SMBus locks itself, usually, but nothing may access the Winbond between
+ bank switches. ISA access must always be locked explicitly!
+ We ignore the W83792D BUSY flag at this moment - it could lead to deadlocks,
+ would slow down the W83792D access and should not be necessary.
+ There are some ugly typecasts here, but the good news is - they should
+ nowhere else be necessary! */
+static int
+w83792d_read_value(struct i2c_client *client, u8 reg)
+{
+ int res=0;
+ res = i2c_smbus_read_byte_data(client, reg);
+
+ return res;
+}
+
+static int
+w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+ i2c_smbus_write_byte_data(client, reg, value);
+ return 0;
+}
+
+/* Called when we have found a new W83792D. It should set limits, etc. */
+static void
+w83792d_init_client(struct i2c_client *client)
+{
+ u8 temp2_cfg, temp3_cfg, vid_in_b;
+
+ if (init) {
+ w83792d_write_value(client, W83792D_REG_CONFIG, 0x80);
+ }
+ /* Clear the bit6 of W83792D_REG_VID_IN_B(set it into 0):
+ W83792D_REG_VID_IN_B bit6 = 0: the high/low limit of
+ vin0/vin1 can be modified by user;
+ W83792D_REG_VID_IN_B bit6 = 1: the high/low limit of
+ vin0/vin1 auto-updated, can NOT be modified by user. */
+ vid_in_b = w83792d_read_value(client, W83792D_REG_VID_IN_B);
+ w83792d_write_value(client, W83792D_REG_VID_IN_B,
+ vid_in_b & 0xbf);
+
+ temp2_cfg = w83792d_read_value(client, W83792D_REG_TEMP2_CONFIG);
+ temp3_cfg = w83792d_read_value(client, W83792D_REG_TEMP3_CONFIG);
+ w83792d_write_value(client, W83792D_REG_TEMP2_CONFIG,
+ temp2_cfg & 0xe6);
+ w83792d_write_value(client, W83792D_REG_TEMP3_CONFIG,
+ temp3_cfg & 0xe6);
+
+ /* Start monitoring */
+ w83792d_write_value(client, W83792D_REG_CONFIG,
+ (w83792d_read_value(client,
+ W83792D_REG_CONFIG) & 0xf7)
+ | 0x01);
+}
+
+static struct w83792d_data *w83792d_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ int i, j;
+ u8 reg_array_tmp[4], pwm_array_tmp[7], reg_tmp;
+
+ down(&data->update_lock);
+
+ if (time_after
+ (jiffies - data->last_updated, (unsigned long) (HZ * 3))
+ || time_before(jiffies, data->last_updated) || !data->valid) {
+ dev_dbg(dev, "Starting device update\n");
+
+ /* Update the voltages measured value and limits */
+ for (i = 0; i < 9; i++) {
+ data->in[i] = w83792d_read_value(client,
+ W83792D_REG_IN[i]);
+ data->in_max[i] = w83792d_read_value(client,
+ W83792D_REG_IN_MAX[i]);
+ data->in_min[i] = w83792d_read_value(client,
+ W83792D_REG_IN_MIN[i]);
+ }
+ data->low_bits[0] = w83792d_read_value(client,
+ W83792D_REG_LOW_BITS1);
+ data->low_bits[1] = w83792d_read_value(client,
+ W83792D_REG_LOW_BITS2);
+ for (i = 0; i < 7; i++) {
+ /* Update the Fan measured value and limits */
+ data->fan[i] = w83792d_read_value(client,
+ W83792D_REG_FAN[i]);
+ data->fan_min[i] = w83792d_read_value(client,
+ W83792D_REG_FAN_MIN[i]);
+ /* Update the PWM/DC Value and PWM/DC flag */
+ pwm_array_tmp[i] = w83792d_read_value(client,
+ W83792D_REG_PWM[i]);
+ data->pwm[i] = pwm_array_tmp[i] & 0x0f;
+ data->pwm_mode[i] = (pwm_array_tmp[i] >> 7) & 0x01;
+ }
+
+ reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG);
+ data->pwmenable[0] = reg_tmp & 0x03;
+ data->pwmenable[1] = (reg_tmp>>2) & 0x03;
+ data->pwmenable[2] = (reg_tmp>>4) & 0x03;
+
+ for (i = 0; i < 3; i++) {
+ data->temp1[i] = w83792d_read_value(client,
+ W83792D_REG_TEMP1[i]);
+ }
+ for (i = 0; i < 2; i++) {
+ for (j = 0; j < 6; j++) {
+ data->temp_add[i][j] = w83792d_read_value(
+ client,W83792D_REG_TEMP_ADD[i][j]);
+ }
+ }
+
+ /* Update the Fan Divisor */
+ for (i = 0; i < 4; i++) {
+ reg_array_tmp[i] = w83792d_read_value(client,
+ W83792D_REG_FAN_DIV[i]);
+ }
+ data->fan_div[0] = reg_array_tmp[0] & 0x07;
+ data->fan_div[1] = (reg_array_tmp[0] >> 4) & 0x07;
+ data->fan_div[2] = reg_array_tmp[1] & 0x07;
+ data->fan_div[3] = (reg_array_tmp[1] >> 4) & 0x07;
+ data->fan_div[4] = reg_array_tmp[2] & 0x07;
+ data->fan_div[5] = (reg_array_tmp[2] >> 4) & 0x07;
+ data->fan_div[6] = reg_array_tmp[3] & 0x07;
+
+ /* Update the realtime status */
+ data->alarms = w83792d_read_value(client, W83792D_REG_ALARM1) +
+ (w83792d_read_value(client, W83792D_REG_ALARM2) << 8) +
+ (w83792d_read_value(client, W83792D_REG_ALARM3) << 16);
+
+ /* Update CaseOpen status and it's CLR_CHS. */
+ data->chassis = (w83792d_read_value(client,
+ W83792D_REG_CHASSIS) >> 5) & 0x01;
+ data->chassis_clear = (w83792d_read_value(client,
+ W83792D_REG_CHASSIS_CLR) >> 7) & 0x01;
+
+ /* Update Thermal Cruise/Smart Fan I target value */
+ for (i = 0; i < 3; i++) {
+ data->thermal_cruise[i] =
+ w83792d_read_value(client,
+ W83792D_REG_THERMAL[i]) & 0x7f;
+ }
+
+ /* Update Smart Fan I/II tolerance */
+ reg_tmp = w83792d_read_value(client, W83792D_REG_TOLERANCE[0]);
+ data->tolerance[0] = reg_tmp & 0x0f;
+ data->tolerance[1] = (reg_tmp >> 4) & 0x0f;
+ data->tolerance[2] = w83792d_read_value(client,
+ W83792D_REG_TOLERANCE[2]) & 0x0f;
+
+ /* Update Smart Fan II temperature points */
+ for (i = 0; i < 3; i++) {
+ for (j = 0; j < 4; j++) {
+ data->sf2_points[i][j] = w83792d_read_value(
+ client,W83792D_REG_POINTS[i][j]) & 0x7f;
+ }
+ }
+
+ /* Update Smart Fan II duty cycle levels */
+ for (i = 0; i < 3; i++) {
+ reg_tmp = w83792d_read_value(client,
+ W83792D_REG_LEVELS[i][0]);
+ data->sf2_levels[i][0] = reg_tmp & 0x0f;
+ data->sf2_levels[i][1] = (reg_tmp >> 4) & 0x0f;
+ reg_tmp = w83792d_read_value(client,
+ W83792D_REG_LEVELS[i][2]);
+ data->sf2_levels[i][2] = (reg_tmp >> 4) & 0x0f;
+ data->sf2_levels[i][3] = reg_tmp & 0x0f;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+
+#ifdef DEBUG
+ w83792d_print_debug(data, dev);
+#endif
+
+ return data;
+}
+
+#ifdef DEBUG
+static void w83792d_print_debug(struct w83792d_data *data, struct device *dev)
+{
+ int i=0, j=0;
+ dev_dbg(dev, "==========The following is the debug message...========\n");
+ dev_dbg(dev, "9 set of Voltages: =====>\n");
+ for (i=0; i<9; i++) {
+ dev_dbg(dev, "vin[%d] is: 0x%x\n", i, data->in[i]);
+ dev_dbg(dev, "vin[%d] max is: 0x%x\n", i, data->in_max[i]);
+ dev_dbg(dev, "vin[%d] min is: 0x%x\n", i, data->in_min[i]);
+ }
+ dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits[0]);
+ dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits[1]);
+ dev_dbg(dev, "7 set of Fan Counts and Duty Cycles: =====>\n");
+ for (i=0; i<7; i++) {
+ dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]);
+ dev_dbg(dev, "fan[%d] min is: 0x%x\n", i, data->fan_min[i]);
+ dev_dbg(dev, "pwm[%d] is: 0x%x\n", i, data->pwm[i]);
+ dev_dbg(dev, "pwm_mode[%d] is: 0x%x\n", i, data->pwm_mode[i]);
+ }
+ dev_dbg(dev, "3 set of Temperatures: =====>\n");
+ for (i=0; i<3; i++) {
+ dev_dbg(dev, "temp1[%d] is: 0x%x\n", i, data->temp1[i]);
+ }
+
+ for (i=0; i<2; i++) {
+ for (j=0; j<6; j++) {
+ dev_dbg(dev, "temp_add[%d][%d] is: 0x%x\n", i, j,
+ data->temp_add[i][j]);
+ }
+ }
+
+ for (i=0; i<7; i++) {
+ dev_dbg(dev, "fan_div[%d] is: 0x%x\n", i, data->fan_div[i]);
+ }
+ dev_dbg(dev, "==========End of the debug message...==================\n");
+ dev_dbg(dev, "\n");
+}
+#endif
+
+static int __init
+sensors_w83792d_init(void)
+{
+ return i2c_add_driver(&w83792d_driver);
+}
+
+static void __exit
+sensors_w83792d_exit(void)
+{
+ i2c_del_driver(&w83792d_driver);
+}
+
+MODULE_AUTHOR("Chunhao Huang @ Winbond <DZShen@Winbond.com.tw>");
+MODULE_DESCRIPTION("W83792AD/D driver for linux-2.6");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83792d_init);
+module_exit(sensors_w83792d_exit);
+
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 4469d52..133e34a 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -36,7 +36,8 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
/* How many retries on register read error */
#define MAX_RETRIES 5
@@ -47,13 +48,12 @@
*/
static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(w83l785ts);
+I2C_CLIENT_INSMOD_1(w83l785ts);
/*
* The W83L785TS-S registers
@@ -105,6 +105,7 @@
struct w83l785ts_data {
struct i2c_client client;
+ struct class_device *class_dev;
struct semaphore update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -140,7 +141,7 @@
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, w83l785ts_detect);
+ return i2c_probe(adapter, &addr_data, w83l785ts_detect);
}
/*
@@ -239,11 +240,19 @@
*/
/* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -252,15 +261,15 @@
static int w83l785ts_detach_client(struct i2c_client *client)
{
+ struct w83l785ts_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->class_dev);
- kfree(i2c_get_clientdata(client));
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
return 0;
}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index cd17039..71c5a85 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -4,12 +4,8 @@
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
-obj-$(CONFIG_I2C_SENSOR) += i2c-sensor.o
obj-y += busses/ chips/ algos/
-i2c-sensor-objs := i2c-sensor-detect.o i2c-sensor-vid.o
-
-
ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
EXTRA_CFLAGS += -DDEBUG
endif
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index fb5b732..df05df1 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -519,8 +519,6 @@
/* -----exported algorithm data: ------------------------------------- */
static struct i2c_algorithm i2c_bit_algo = {
- .name = "Bit-shift algorithm",
- .id = I2C_ALGO_BIT,
.master_xfer = bit_xfer,
.functionality = bit_func,
};
@@ -541,8 +539,6 @@
DEB2(dev_dbg(&adap->dev, "hw routines registered.\n"));
/* register new adapter to i2c module... */
-
- adap->id |= i2c_bit_algo.id;
adap->algo = &i2c_bit_algo;
adap->timeout = 100; /* default values, should */
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
index e6cae39..2db7bfc 100644
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ b/drivers/i2c/algos/i2c-algo-ite.c
@@ -713,8 +713,6 @@
/* -----exported algorithm data: ------------------------------------- */
static struct i2c_algorithm iic_algo = {
- .name = "ITE IIC algorithm",
- .id = I2C_ALGO_IIC,
.master_xfer = iic_xfer,
.algo_control = algo_control, /* ioctl */
.functionality = iic_func,
@@ -738,8 +736,6 @@
adap->name));
/* register new adapter to i2c module... */
-
- adap->id |= iic_algo.id;
adap->algo = &iic_algo;
adap->timeout = 100; /* default values, should */
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index cc3a952..beb10ed 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -187,12 +187,14 @@
int numbytes = 0;
int state;
int ret;
+ int timeout = 100;
- state = pca_status(adap);
- if ( state != 0xF8 ) {
- dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state );
- /* FIXME: what to do. Force stop ? */
- return -EREMOTEIO;
+ while ((state = pca_status(adap)) != 0xf8 && timeout--) {
+ msleep(10);
+ }
+ if (state != 0xf8) {
+ dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state);
+ return -EIO;
}
DEB1("{{{ XFER %d messages\n", num);
@@ -354,8 +356,6 @@
}
static struct i2c_algorithm pca_algo = {
- .name = "PCA9564 algorithm",
- .id = I2C_ALGO_PCA,
.master_xfer = pca_xfer,
.functionality = pca_func,
};
@@ -369,8 +369,6 @@
int rval;
/* register new adapter to i2c module... */
-
- adap->id |= pca_algo.id;
adap->algo = &pca_algo;
adap->timeout = 100; /* default values, should */
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 8d087da..6e498df 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -459,8 +459,6 @@
/* -----exported algorithm data: ------------------------------------- */
static struct i2c_algorithm pcf_algo = {
- .name = "PCF8584 algorithm",
- .id = I2C_ALGO_PCF,
.master_xfer = pcf_xfer,
.functionality = pcf_func,
};
@@ -476,8 +474,6 @@
DEB2(dev_dbg(&adap->dev, "hw routines registered.\n"));
/* register new adapter to i2c module... */
-
- adap->id |= pcf_algo.id;
adap->algo = &pcf_algo;
adap->timeout = 100; /* default values, should */
diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c
index 422721b..932c4fa 100644
--- a/drivers/i2c/algos/i2c-algo-sgi.c
+++ b/drivers/i2c/algos/i2c-algo-sgi.c
@@ -149,7 +149,7 @@
err = i2c_write(adap, p->buf, p->len);
}
- return err;
+ return (err < 0) ? err : i;
}
static u32 sgi_func(struct i2c_adapter *adap)
@@ -158,8 +158,6 @@
}
static struct i2c_algorithm sgi_algo = {
- .name = "SGI algorithm",
- .id = I2C_ALGO_SGI,
.master_xfer = sgi_xfer,
.functionality = sgi_func,
};
@@ -169,7 +167,6 @@
*/
int i2c_sgi_add_bus(struct i2c_adapter *adap)
{
- adap->id |= sgi_algo.id;
adap->algo = &sgi_algo;
return i2c_add_adapter(adap);
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index f278549..8ed5ad1 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -135,8 +135,6 @@
/* -----exported algorithm data: ------------------------------------- */
static struct i2c_algorithm i2c_sibyte_algo = {
- .name = "SiByte algorithm",
- .id = I2C_ALGO_SIBYTE,
.smbus_xfer = smbus_xfer,
.algo_control = algo_control, /* ioctl */
.functionality = bit_func,
@@ -151,8 +149,6 @@
struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
/* register new adapter to i2c module... */
-
- i2c_adap->id |= i2c_sibyte_algo.id;
i2c_adap->algo = &i2c_sibyte_algo;
/* Set the frequency to 100 kHz */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 916ba5e..6e9da13 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -182,14 +182,8 @@
will be called i2c-iop3xx.
config I2C_ISA
- tristate "ISA Bus support"
+ tristate
depends on I2C
- help
- If you say yes to this option, support will be included for i2c
- interfaces that are on the ISA bus.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-isa.
config I2C_ITE
tristate "ITE I2C Adapter"
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index f634a07..f021acd 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -472,8 +472,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-i2c SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = ali1535_access,
.functionality = ali1535_func,
};
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index fdd881a..8694750 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -366,8 +366,6 @@
}
static struct i2c_algorithm ali1563_algorithm = {
- .name = "Non-i2c SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = ali1563_access,
.functionality = ali1563_func,
};
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 0f781a1..b3f50bf 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -462,8 +462,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = ali15x3_access,
.functionality = ali15x3_func,
};
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 6347ebc..6ad0603 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -295,8 +295,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = amd756_access,
.functionality = amd756_func,
};
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index d664448..45ea24b 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -323,8 +323,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus 2.0 adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = amd8111_access,
.functionality = amd8111_func,
};
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index a7ff112..d06edce 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -283,8 +283,6 @@
}
static struct i2c_algorithm au1550_algo = {
- .name = "Au1550 algorithm",
- .id = I2C_ALGO_AU1550,
.master_xfer = au1550_xfer,
.functionality = au1550_func,
};
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 1ab4131..709beab 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -535,8 +535,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = i801_access,
.functionality = i801_func,
};
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 93ca36d..a3ed959 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -627,8 +627,6 @@
}
static struct i2c_algorithm iic_algo = {
- .name = "IBM IIC algorithm",
- .id = I2C_ALGO_OCP,
.master_xfer = iic_xfer,
.functionality = iic_func
};
@@ -727,7 +725,7 @@
adap = &dev->adap;
strcpy(adap->name, "IBM IIC");
i2c_set_adapdata(adap, dev);
- adap->id = I2C_HW_OCP | iic_algo.id;
+ adap->id = I2C_HW_OCP;
adap->algo = &iic_algo;
adap->client_register = NULL;
adap->client_unregister = NULL;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 6b682e9..7bd9102 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -399,8 +399,6 @@
}
static struct i2c_algorithm iop3xx_i2c_algo = {
- .name = "IOP3xx I2C algorithm",
- .id = I2C_ALGO_IOP3XX,
.master_xfer = iop3xx_i2c_master_xfer,
.algo_control = iop3xx_i2c_algo_control,
.functionality = iop3xx_i2c_func,
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index 00e7f71..bdc6806 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -1,6 +1,8 @@
/*
- i2c-isa.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
+ i2c-isa.c - an i2c-core-like thing for ISA hardware monitoring chips
+ Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
+
+ Based on the i2c-isa pseudo-adapter from the lm_sensors project
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
This program is free software; you can redistribute it and/or modify
@@ -18,30 +20,36 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* This implements an i2c algorithm/adapter for ISA bus. Not that this is
- on first sight very useful; almost no functionality is preserved.
- Except that it makes writing drivers for chips which can be on both
- the SMBus and the ISA bus very much easier. See lm78.c for an example
- of this. */
+/* This implements an i2c-core-like thing for ISA hardware monitoring
+ chips. Such chips are linked to the i2c subsystem for historical
+ reasons (because the early ISA hardware monitoring chips such as the
+ LM78 had both an I2C and an ISA interface). They used to be
+ registered with the main i2c-core, but as a first step in the
+ direction of a clean separation between I2C and ISA chip drivers,
+ we now have this separate core for ISA ones. It is significantly
+ more simple than the real one, of course, because we don't have to
+ handle multiple busses: there is only one (fake) ISA adapter.
+ It is worth noting that we still rely on i2c-core for some things
+ at the moment - but hopefully this won't last. */
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/i2c.h>
+#include <linux/i2c-isa.h>
static u32 isa_func(struct i2c_adapter *adapter);
/* This is the actual algorithm we define */
static struct i2c_algorithm isa_algorithm = {
- .name = "ISA bus algorithm",
- .id = I2C_ALGO_ISA,
.functionality = isa_func,
};
/* There can only be one... */
static struct i2c_adapter isa_adapter = {
.owner = THIS_MODULE,
+ .id = I2C_HW_ISA,
.class = I2C_CLASS_HWMON,
.algo = &isa_algorithm,
.name = "ISA main adapter",
@@ -53,17 +61,146 @@
return 0;
}
+
+/* Copied from i2c-core */
+static ssize_t show_adapter_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
+ return sprintf(buf, "%s\n", adap->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
+
+static int i2c_isa_device_probe(struct device *dev)
+{
+ return -ENODEV;
+}
+
+static int i2c_isa_device_remove(struct device *dev)
+{
+ return 0;
+}
+
+
+/* We implement an interface which resembles i2c_{add,del}_driver,
+ but for i2c-isa drivers. We don't have to remember and handle lists
+ of drivers and adapters so this is much more simple, of course. */
+
+int i2c_isa_add_driver(struct i2c_driver *driver)
+{
+ int res;
+
+ /* Add the driver to the list of i2c drivers in the driver core */
+ driver->driver.name = driver->name;
+ driver->driver.bus = &i2c_bus_type;
+ driver->driver.probe = i2c_isa_device_probe;
+ driver->driver.remove = i2c_isa_device_remove;
+ res = driver_register(&driver->driver);
+ if (res)
+ return res;
+ dev_dbg(&isa_adapter.dev, "Driver %s registered\n", driver->name);
+
+ /* Now look for clients */
+ driver->attach_adapter(&isa_adapter);
+
+ return 0;
+}
+
+int i2c_isa_del_driver(struct i2c_driver *driver)
+{
+ struct list_head *item, *_n;
+ struct i2c_client *client;
+ int res;
+
+ /* Detach all clients belonging to this one driver */
+ list_for_each_safe(item, _n, &isa_adapter.clients) {
+ client = list_entry(item, struct i2c_client, list);
+ if (client->driver != driver)
+ continue;
+ dev_dbg(&isa_adapter.dev, "Detaching client %s at 0x%x\n",
+ client->name, client->addr);
+ if ((res = driver->detach_client(client))) {
+ dev_err(&isa_adapter.dev, "Failed, driver "
+ "%s not unregistered!\n",
+ driver->name);
+ return res;
+ }
+ }
+
+ /* Get the driver off the core list */
+ driver_unregister(&driver->driver);
+ dev_dbg(&isa_adapter.dev, "Driver %s unregistered\n", driver->name);
+
+ return 0;
+}
+
+
static int __init i2c_isa_init(void)
{
- return i2c_add_adapter(&isa_adapter);
+ init_MUTEX(&isa_adapter.clist_lock);
+ INIT_LIST_HEAD(&isa_adapter.clients);
+
+ isa_adapter.nr = ANY_I2C_ISA_BUS;
+ isa_adapter.dev.parent = &platform_bus;
+ sprintf(isa_adapter.dev.bus_id, "i2c-%d", isa_adapter.nr);
+ isa_adapter.dev.driver = &i2c_adapter_driver;
+ isa_adapter.dev.release = &i2c_adapter_dev_release;
+ device_register(&isa_adapter.dev);
+ device_create_file(&isa_adapter.dev, &dev_attr_name);
+
+ /* Add this adapter to the i2c_adapter class */
+ memset(&isa_adapter.class_dev, 0x00, sizeof(struct class_device));
+ isa_adapter.class_dev.dev = &isa_adapter.dev;
+ isa_adapter.class_dev.class = &i2c_adapter_class;
+ strlcpy(isa_adapter.class_dev.class_id, isa_adapter.dev.bus_id,
+ BUS_ID_SIZE);
+ class_device_register(&isa_adapter.class_dev);
+
+ dev_dbg(&isa_adapter.dev, "%s registered\n", isa_adapter.name);
+
+ return 0;
}
static void __exit i2c_isa_exit(void)
{
- i2c_del_adapter(&isa_adapter);
+#ifdef DEBUG
+ struct list_head *item, *_n;
+ struct i2c_client *client = NULL;
+#endif
+
+ /* There should be no more active client */
+#ifdef DEBUG
+ dev_dbg(&isa_adapter.dev, "Looking for clients\n");
+ list_for_each_safe(item, _n, &isa_adapter.clients) {
+ client = list_entry(item, struct i2c_client, list);
+ dev_err(&isa_adapter.dev, "Driver %s still has an active "
+ "ISA client at 0x%x\n", client->driver->name,
+ client->addr);
+ }
+ if (client != NULL)
+ return;
+#endif
+
+ /* Clean up the sysfs representation */
+ dev_dbg(&isa_adapter.dev, "Unregistering from sysfs\n");
+ init_completion(&isa_adapter.dev_released);
+ init_completion(&isa_adapter.class_dev_released);
+ class_device_unregister(&isa_adapter.class_dev);
+ device_remove_file(&isa_adapter.dev, &dev_attr_name);
+ device_unregister(&isa_adapter.dev);
+
+ /* Wait for sysfs to drop all references */
+ dev_dbg(&isa_adapter.dev, "Waiting for sysfs completion\n");
+ wait_for_completion(&isa_adapter.dev_released);
+ wait_for_completion(&isa_adapter.class_dev_released);
+
+ dev_dbg(&isa_adapter.dev, "%s unregistered\n", isa_adapter.name);
}
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+EXPORT_SYMBOL(i2c_isa_add_driver);
+EXPORT_SYMBOL(i2c_isa_del_driver);
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("ISA bus access through i2c");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
index 94ae808..37b49c2 100644
--- a/drivers/i2c/busses/i2c-keywest.c
+++ b/drivers/i2c/busses/i2c-keywest.c
@@ -87,12 +87,9 @@
};
#endif /* DEBUG */
-static int probe;
-
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
MODULE_LICENSE("GPL");
-module_param(probe, bool, 0);
#ifdef POLLED_MODE
/* Don't schedule, the g5 fan controller is too
@@ -498,8 +495,6 @@
/* For now, we only handle combined mode (smbus) */
static struct i2c_algorithm keywest_algorithm = {
- .name = "Keywest i2c",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = keywest_smbus_xfer,
.master_xfer = keywest_xfer,
.functionality = keywest_func,
@@ -621,7 +616,6 @@
sprintf(chan->adapter.name, "%s %d", np->parent->name, i);
chan->iface = iface;
chan->chan_no = i;
- chan->adapter.id = I2C_ALGO_SMBUS;
chan->adapter.algo = &keywest_algorithm;
chan->adapter.algo_data = NULL;
chan->adapter.client_register = NULL;
@@ -635,15 +629,6 @@
chan->adapter.name);
i2c_set_adapdata(&chan->adapter, NULL);
}
- if (probe) {
- printk("Probe: ");
- for (addr = 0x00; addr <= 0x7f; addr++) {
- if (i2c_smbus_xfer(&chan->adapter,addr,
- 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
- printk("%02x ", addr);
- }
- printk("\n");
- }
}
printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n",
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 9ad3e92..f065583 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -272,8 +272,6 @@
}
static struct i2c_algorithm mpc_algo = {
- .name = "MPC algorithm",
- .id = I2C_ALGO_MPC107,
.master_xfer = mpc_xfer,
.functionality = mpc_functionality,
};
@@ -281,7 +279,7 @@
static struct i2c_adapter mpc_ops = {
.owner = THIS_MODULE,
.name = "MPC adapter",
- .id = I2C_ALGO_MPC107 | I2C_HW_MPC107,
+ .id = I2C_HW_MPC107,
.algo = &mpc_algo,
.class = I2C_CLASS_HWMON,
.timeout = 1,
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 5b85278..99abca4 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -423,18 +423,16 @@
mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
- int i, rc = 0;
+ int i, rc;
for (i=0; i<num; i++)
- if ((rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[i])) != 0)
- break;
+ if ((rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[i])) < 0)
+ return rc;
- return rc;
+ return num;
}
static struct i2c_algorithm mv64xxx_i2c_algo = {
- .name = MV64XXX_I2C_CTLR_NAME " algorithm",
- .id = I2C_ALGO_MV64XXX,
.master_xfer = mv64xxx_i2c_xfer,
.functionality = mv64xxx_i2c_functionality,
};
@@ -523,7 +521,7 @@
drv_data->freq_m = pdata->freq_m;
drv_data->freq_n = pdata->freq_n;
drv_data->irq = platform_get_irq(pd, 0);
- drv_data->adapter.id = I2C_ALGO_MV64XXX | I2C_HW_MV64XXX;
+ drv_data->adapter.id = I2C_HW_MV64XXX;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
drv_data->adapter.class = I2C_CLASS_HWMON;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 74eb89a..e0b7a91 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -110,8 +110,6 @@
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = nforce2_access,
.functionality = nforce2_func,
};
@@ -131,7 +129,6 @@
struct nforce2_smbus *smbus = adap->algo_data;
unsigned char protocol, pec, temp;
unsigned char len = 0; /* to keep the compiler quiet */
- int timeout = 0;
int i;
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
@@ -191,29 +188,10 @@
case I2C_SMBUS_PROC_CALL:
dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
return -1;
- /*
- outb_p(command, NVIDIA_SMB_CMD);
- outb_p(data->word, NVIDIA_SMB_DATA);
- outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1);
- protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec;
- read_write = I2C_SMBUS_READ;
- break;
- */
case I2C_SMBUS_BLOCK_PROC_CALL:
dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
return -1;
- /*
- protocol |= pec;
- len = min_t(u8, data->block[0], 31);
- outb_p(command, NVIDIA_SMB_CMD);
- outb_p(len, NVIDIA_SMB_BCNT);
- for (i = 0; i < len; i++)
- outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i);
- protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec;
- read_write = I2C_SMBUS_READ;
- break;
- */
case I2C_SMBUS_WORD_DATA_PEC:
case I2C_SMBUS_BLOCK_DATA_PEC:
@@ -232,12 +210,6 @@
temp = inb_p(NVIDIA_SMB_STS);
-#if 0
- do {
- i2c_do_pause(1);
- temp = inb_p(NVIDIA_SMB_STS);
- } while (((temp & NVIDIA_SMB_STS_DONE) == 0) && (timeout++ < MAX_TIMEOUT));
-#endif
if (~temp & NVIDIA_SMB_STS_DONE) {
udelay(500);
temp = inb_p(NVIDIA_SMB_STS);
@@ -247,9 +219,10 @@
temp = inb_p(NVIDIA_SMB_STS);
}
- if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE)
- || (temp & NVIDIA_SMB_STS_STATUS))
+ if ((~temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
+ dev_dbg(&adap->dev, "SMBus Timeout! (0x%02x)\n", temp);
return -1;
+ }
if (read_write == I2C_SMBUS_WRITE)
return 0;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 6d34ee3..6d48a4d 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -399,8 +399,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = piix4_access,
.functionality = piix4_func,
};
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index a3b3825..73a092f 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -568,7 +568,6 @@
/* i2c bus registration info */
static struct i2c_algorithm s3c24xx_i2c_algorithm = {
- .name = "S3C2410-I2C-Algorithm",
.master_xfer = s3c24xx_i2c_xfer,
.functionality = s3c24xx_i2c_func,
};
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index bbd5e4e..080318d 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -357,8 +357,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = sis5595_access,
.functionality = sis5595_func,
};
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index f58455e..86f0f44 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -448,8 +448,6 @@
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = sis630_access,
.functionality = sis630_func,
};
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 6484792..ead2ff3 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -249,8 +249,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = sis96x_access,
.functionality = sis96x_func,
};
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
index 00d94e8..73f481e 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -109,8 +109,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.functionality = stub_func,
.smbus_xfer = stub_xfer,
};
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 6b50080..99d209e 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -286,8 +286,6 @@
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = vt596_access,
.functionality = vt596_func,
};
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index a18bdd9..a1d580e 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -395,8 +395,6 @@
/* For now, we only handle combined mode (smbus) */
static struct i2c_algorithm scx200_acb_algorithm = {
- .name = "NatSemi SCx200 ACCESS.bus",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = scx200_acb_smbus_xfer,
.functionality = scx200_acb_func,
};
@@ -456,7 +454,7 @@
i2c_set_adapdata(adapter, iface);
snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index);
adapter->owner = THIS_MODULE;
- adapter->id = I2C_ALGO_SMBUS;
+ adapter->id = I2C_HW_SMBUS_SCX200;
adapter->algo = &scx200_acb_algorithm;
adapter->class = I2C_CLASS_HWMON;
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 43f70db..6bd44a4 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -2,17 +2,12 @@
# Miscellaneous I2C chip drivers configuration
#
-config I2C_SENSOR
- tristate
- default n
-
menu "Miscellaneous I2C Chip support"
depends on I2C
config SENSORS_DS1337
tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for Dallas Semiconductor
DS1337 and DS1339 real-time clock chips.
@@ -23,7 +18,6 @@
config SENSORS_DS1374
tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock"
depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for Dallas Semiconductor
DS1374 real-time clock chips.
@@ -34,7 +28,6 @@
config SENSORS_EEPROM
tristate "EEPROM reader"
depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get read-only access to the EEPROM data
available on modern memory DIMMs and Sony Vaio laptops. Such
@@ -46,7 +39,6 @@
config SENSORS_PCF8574
tristate "Philips PCF8574 and PCF8574A"
depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for Philips PCF8574 and
PCF8574A chips.
@@ -67,7 +59,6 @@
config SENSORS_PCF8591
tristate "Philips PCF8591"
depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for Philips PCF8591 chips.
@@ -77,7 +68,6 @@
config SENSORS_RTC8564
tristate "Epson 8564 RTC chip"
depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
help
If you say yes here you get support for the Epson 8564 RTC chip.
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 82cf959..9d3175c 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -17,7 +17,6 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/string.h>
#include <linux/rtc.h> /* get the user-level API */
#include <linux/bcd.h>
@@ -39,9 +38,8 @@
* Functions declaration
*/
static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
-SENSORS_INSMOD_1(ds1337);
+I2C_CLIENT_INSMOD_1(ds1337);
static int ds1337_attach_adapter(struct i2c_adapter *adapter);
static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind);
@@ -227,7 +225,7 @@
static int ds1337_attach_adapter(struct i2c_adapter *adapter)
{
- return i2c_detect(adapter, &addr_data, ds1337_detect);
+ return i2c_probe(adapter, &addr_data, ds1337_detect);
}
/*
@@ -354,11 +352,8 @@
int err;
struct ds1337_data *data = i2c_get_clientdata(client);
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
list_del(&data->list);
kfree(data);
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index a445736..0936327 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -53,7 +53,6 @@
.normal_i2c = normal_addr,
.probe = ignore,
.ignore = ignore,
- .force = ignore,
};
static ulong ds1374_read_rtc(void)
@@ -166,7 +165,7 @@
"can't confirm time set from rtc chip\n");
}
-ulong new_time;
+static ulong new_time;
DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time);
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index a2da31b..d58403a 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -33,15 +33,13 @@
#include <linux/sched.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
0x55, 0x56, 0x57, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(eeprom);
+I2C_CLIENT_INSMOD_1(eeprom);
/* Size of EEPROM in bytes */
@@ -153,21 +151,16 @@
static int eeprom_attach_adapter(struct i2c_adapter *adapter)
{
- return i2c_detect(adapter, &addr_data, eeprom_detect);
+ return i2c_probe(adapter, &addr_data, eeprom_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct eeprom_data *data;
int err = 0;
- /* prevent 24RF08 corruption */
- if (kind < 0)
- i2c_smbus_xfer(adapter, address, 0, 0, 0,
- I2C_SMBUS_QUICK, NULL);
-
/* There are three ways we can read the EEPROM data:
(1) I2C block reads (faster, but unsupported by most adapters)
(2) Consecutive byte reads (100% overhead)
@@ -231,10 +224,8 @@
int err;
err = i2c_detach_client(client);
- if (err) {
- dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
+ if (err)
return err;
- }
kfree(i2c_get_clientdata(client));
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index 778d7e1..3f14528 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -42,7 +42,6 @@
.normal_i2c = normal_addr,
.probe = ignore,
.ignore = ignore,
- .force = ignore,
};
ulong
@@ -145,7 +144,7 @@
return;
}
-ulong new_time;
+static ulong new_time;
DECLARE_TASKLET_DISABLED(m41t00_tasklet, m41t00_set_tlet, (ulong)&new_time);
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 0230375..9e1aeb6 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -5,97 +5,60 @@
Based on i2c/chips/eeprom.c
- The MAX6875 has two EEPROM sections: config and user.
- At reset, the config EEPROM is read into the registers.
+ The MAX6875 has a bank of registers and two banks of EEPROM.
+ Address ranges are defined as follows:
+ * 0x0000 - 0x0046 = configuration registers
+ * 0x8000 - 0x8046 = configuration EEPROM
+ * 0x8100 - 0x82FF = user EEPROM
- This driver make 3 binary files available in sysfs:
- reg_config - direct access to the registers
- eeprom_config - acesses configuration eeprom space
- eeprom_user - free for application use
+ This driver makes the user EEPROM available for read.
- In our application, we put device serial & model numbers in user eeprom.
+ The registers & config EEPROM should be accessed via i2c-dev.
- Notes:
- 1) The datasheet says that register 0x44 / EEPROM 0x8044 should NOT
- be overwritten, so the driver explicitly prevents that.
- 2) It's a good idea to keep the config (0x45) locked in config EEPROM.
- You can temporarily enable config writes by changing register 0x45.
+ The MAX6875 ignores the lowest address bit, so each chip responds to
+ two addresses - 0x50/0x51 and 0x52/0x53.
+
+ Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read
+ address, so this driver is destructive if loaded for the wrong EEPROM chip.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <asm/semaphore.h>
-/* Addresses to scan */
-/* No address scanned by default, as this could corrupt standard EEPROMS. */
+/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
static unsigned short normal_i2c[] = {I2C_CLIENT_END};
-static unsigned int normal_isa[] = {I2C_CLIENT_ISA_END};
/* Insmod parameters */
-SENSORS_INSMOD_1(max6875);
-
-/* this param will prevent 'accidental' writes to the eeprom */
-static int allow_write = 0;
-module_param(allow_write, int, 0);
-MODULE_PARM_DESC(allow_write,
- "Enable write access:\n"
- "*0: Read only\n"
- " 1: Read/Write access");
+I2C_CLIENT_INSMOD_1(max6875);
/* The MAX6875 can only read/write 16 bytes at a time */
#define SLICE_SIZE 16
#define SLICE_BITS 4
-/* CONFIG EEPROM is at addresses 0x8000 - 0x8045, registers are at 0 - 0x45 */
-#define CONFIG_EEPROM_BASE 0x8000
-#define CONFIG_EEPROM_SIZE 0x0046
-#define CONFIG_EEPROM_SLICES 5
-
/* USER EEPROM is at addresses 0x8100 - 0x82FF */
#define USER_EEPROM_BASE 0x8100
#define USER_EEPROM_SIZE 0x0200
#define USER_EEPROM_SLICES 32
/* MAX6875 commands */
-#define MAX6875_CMD_BLOCK_WRITE 0x83
-#define MAX6875_CMD_BLOCK_READ 0x84
-#define MAX6875_CMD_REBOOT 0x88
-
-enum max6875_area_type {
- max6875_register_config=0,
- max6875_eeprom_config,
- max6875_eeprom_user,
- max6857_max
-};
-
-struct eeprom_block {
- enum max6875_area_type type;
- u8 slices;
- u32 size;
- u32 valid;
- u32 base;
- unsigned long *updated;
- u8 *data;
-};
+#define MAX6875_CMD_BLK_READ 0x84
/* Each client has this additional data */
struct max6875_data {
struct i2c_client client;
struct semaphore update_lock;
- struct eeprom_block blocks[max6857_max];
- /* the above structs point into the arrays below */
- u8 data[USER_EEPROM_SIZE + (CONFIG_EEPROM_SIZE*2)];
- unsigned long last_updated[USER_EEPROM_SLICES + (CONFIG_EEPROM_SLICES*2)];
+
+ u32 valid;
+ u8 data[USER_EEPROM_SIZE];
+ unsigned long last_updated[USER_EEPROM_SLICES];
};
static int max6875_attach_adapter(struct i2c_adapter *adapter);
@@ -111,337 +74,160 @@
.detach_client = max6875_detach_client,
};
-static int max6875_update_slice(struct i2c_client *client,
- struct eeprom_block *blk,
- int slice)
+static void max6875_update_slice(struct i2c_client *client, int slice)
{
struct max6875_data *data = i2c_get_clientdata(client);
- int i, j, addr, count;
- u8 rdbuf[SLICE_SIZE];
- int retval = 0;
+ int i, j, addr;
+ u8 *buf;
- if (slice >= blk->slices)
- return -1;
+ if (slice >= USER_EEPROM_SLICES)
+ return;
down(&data->update_lock);
- if (!(blk->valid & (1 << slice)) ||
- (jiffies - blk->updated[slice] > 300 * HZ) ||
- (jiffies < blk->updated[slice])) {
- dev_dbg(&client->dev, "Starting eeprom update, slice %u, base %u\n",
- slice, blk->base);
+ buf = &data->data[slice << SLICE_BITS];
- addr = blk->base + (slice << SLICE_BITS);
- count = blk->size - (slice << SLICE_BITS);
- if (count > SLICE_SIZE) {
- count = SLICE_SIZE;
+ if (!(data->valid & (1 << slice)) ||
+ time_after(jiffies, data->last_updated[slice])) {
+
+ dev_dbg(&client->dev, "Starting update of slice %u\n", slice);
+
+ data->valid &= ~(1 << slice);
+
+ addr = USER_EEPROM_BASE + (slice << SLICE_BITS);
+
+ /* select the eeprom address */
+ if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) {
+ dev_err(&client->dev, "address set failed\n");
+ goto exit_up;
}
- /* Preset the read address */
- if (addr < 0x100) {
- /* select the register */
- if (i2c_smbus_write_byte(client, addr & 0xFF)) {
- dev_dbg(&client->dev, "max6875 register select has failed!\n");
- retval = -1;
- goto exit;
+ if (i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ if (i2c_smbus_read_i2c_block_data(client,
+ MAX6875_CMD_BLK_READ,
+ buf) != SLICE_SIZE) {
+ goto exit_up;
}
} else {
- /* select the eeprom */
- if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) {
- dev_dbg(&client->dev, "max6875 address set has failed!\n");
- retval = -1;
- goto exit;
- }
- }
-
- if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- if (i2c_smbus_read_i2c_block_data(client, MAX6875_CMD_BLOCK_READ,
- rdbuf) != SLICE_SIZE)
- {
- retval = -1;
- goto exit;
- }
-
- memcpy(&blk->data[slice << SLICE_BITS], rdbuf, count);
- } else {
- for (i = 0; i < count; i++) {
+ for (i = 0; i < SLICE_SIZE; i++) {
j = i2c_smbus_read_byte(client);
- if (j < 0)
- {
- retval = -1;
- goto exit;
+ if (j < 0) {
+ goto exit_up;
}
- blk->data[(slice << SLICE_BITS) + i] = (u8) j;
+ buf[i] = j;
}
}
- blk->updated[slice] = jiffies;
- blk->valid |= (1 << slice);
+ data->last_updated[slice] = jiffies;
+ data->valid |= (1 << slice);
}
- exit:
+exit_up:
up(&data->update_lock);
- return retval;
}
-static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off, size_t count,
- enum max6875_area_type area_type)
+static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
{
- struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
+ struct i2c_client *client = kobj_to_i2c_client(kobj);
struct max6875_data *data = i2c_get_clientdata(client);
- struct eeprom_block *blk;
- int slice;
+ int slice, max_slice;
- blk = &data->blocks[area_type];
-
- if (off > blk->size)
+ if (off > USER_EEPROM_SIZE)
return 0;
- if (off + count > blk->size)
- count = blk->size - off;
- /* Only refresh slices which contain requested bytes */
- for (slice = (off >> SLICE_BITS); slice <= ((off + count - 1) >> SLICE_BITS); slice++)
- max6875_update_slice(client, blk, slice);
+ if (off + count > USER_EEPROM_SIZE)
+ count = USER_EEPROM_SIZE - off;
- memcpy(buf, &blk->data[off], count);
+ /* refresh slices which contain requested bytes */
+ max_slice = (off + count - 1) >> SLICE_BITS;
+ for (slice = (off >> SLICE_BITS); slice <= max_slice; slice++)
+ max6875_update_slice(client, slice);
+
+ memcpy(buf, &data->data[off], count);
return count;
}
-static ssize_t max6875_user_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
- return max6875_read(kobj, buf, off, count, max6875_eeprom_user);
-}
-
-static ssize_t max6875_config_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
- return max6875_read(kobj, buf, off, count, max6875_eeprom_config);
-}
-
-static ssize_t max6875_cfgreg_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
- return max6875_read(kobj, buf, off, count, max6875_register_config);
-}
-
-
-static ssize_t max6875_write(struct kobject *kobj, char *buf, loff_t off, size_t count,
- enum max6875_area_type area_type)
-{
- struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
- struct max6875_data *data = i2c_get_clientdata(client);
- struct eeprom_block *blk;
- int slice, addr, retval;
- ssize_t sent = 0;
-
- blk = &data->blocks[area_type];
-
- if (off > blk->size)
- return 0;
- if ((off + count) > blk->size)
- count = blk->size - off;
-
- if (down_interruptible(&data->update_lock))
- return -EAGAIN;
-
- /* writing to a register is done with i2c_smbus_write_byte_data() */
- if (blk->type == max6875_register_config) {
- for (sent = 0; sent < count; sent++) {
- addr = off + sent;
- if (addr == 0x44)
- continue;
-
- retval = i2c_smbus_write_byte_data(client, addr, buf[sent]);
- }
- } else {
- int cmd, val;
-
- /* We are writing to EEPROM */
- for (sent = 0; sent < count; sent++) {
- addr = blk->base + off + sent;
- cmd = addr >> 8;
- val = (addr & 0xff) | (buf[sent] << 8); // reversed
-
- if (addr == 0x8044)
- continue;
-
- retval = i2c_smbus_write_word_data(client, cmd, val);
-
- if (retval) {
- goto error_exit;
- }
-
- /* A write takes up to 11 ms */
- msleep(11);
- }
- }
-
- /* Invalidate the scratch buffer */
- for (slice = (off >> SLICE_BITS); slice <= ((off + count - 1) >> SLICE_BITS); slice++)
- blk->valid &= ~(1 << slice);
-
- error_exit:
- up(&data->update_lock);
-
- return sent;
-}
-
-static ssize_t max6875_user_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
- return max6875_write(kobj, buf, off, count, max6875_eeprom_user);
-}
-
-static ssize_t max6875_config_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
- return max6875_write(kobj, buf, off, count, max6875_eeprom_config);
-}
-
-static ssize_t max6875_cfgreg_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
- return max6875_write(kobj, buf, off, count, max6875_register_config);
-}
-
static struct bin_attribute user_eeprom_attr = {
.attr = {
- .name = "eeprom_user",
- .mode = S_IRUGO | S_IWUSR | S_IWGRP,
+ .name = "eeprom",
+ .mode = S_IRUGO,
.owner = THIS_MODULE,
},
- .size = USER_EEPROM_SIZE,
- .read = max6875_user_read,
- .write = max6875_user_write,
-};
-
-static struct bin_attribute config_eeprom_attr = {
- .attr = {
- .name = "eeprom_config",
- .mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
- },
- .size = CONFIG_EEPROM_SIZE,
- .read = max6875_config_read,
- .write = max6875_config_write,
-};
-
-static struct bin_attribute config_register_attr = {
- .attr = {
- .name = "reg_config",
- .mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
- },
- .size = CONFIG_EEPROM_SIZE,
- .read = max6875_cfgreg_read,
- .write = max6875_cfgreg_write,
+ .size = USER_EEPROM_SIZE,
+ .read = max6875_read,
};
static int max6875_attach_adapter(struct i2c_adapter *adapter)
{
- return i2c_detect(adapter, &addr_data, max6875_detect);
+ return i2c_probe(adapter, &addr_data, max6875_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
static int max6875_detect(struct i2c_adapter *adapter, int address, int kind)
{
- struct i2c_client *new_client;
+ struct i2c_client *real_client;
+ struct i2c_client *fake_client;
struct max6875_data *data;
int err = 0;
- /* Prevent 24RF08 corruption (in case of user error) */
- if (kind < 0)
- i2c_smbus_xfer(adapter, address, 0, 0, 0,
- I2C_SMBUS_QUICK, NULL);
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
+ | I2C_FUNC_SMBUS_READ_BYTE))
+ return 0;
- /* There are three ways we can read the EEPROM data:
- (1) I2C block reads (faster, but unsupported by most adapters)
- (2) Consecutive byte reads (100% overhead)
- (3) Regular byte data reads (200% overhead)
- The third method is not implemented by this driver because all
- known adapters support at least the second. */
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA |
- I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
- goto exit;
+ /* Only check even addresses */
+ if (address & 1)
+ return 0;
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access eeprom_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
+ if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL)))
+ return -ENOMEM;
memset(data, 0, sizeof(struct max6875_data));
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &max6875_driver;
- new_client->flags = 0;
+ /* A fake client is created on the odd address */
+ if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit_kfree1;
+ }
+ memset(fake_client, 0, sizeof(struct i2c_client));
- /* Setup the user section */
- data->blocks[max6875_eeprom_user].type = max6875_eeprom_user;
- data->blocks[max6875_eeprom_user].slices = USER_EEPROM_SLICES;
- data->blocks[max6875_eeprom_user].size = USER_EEPROM_SIZE;
- data->blocks[max6875_eeprom_user].base = USER_EEPROM_BASE;
- data->blocks[max6875_eeprom_user].data = data->data;
- data->blocks[max6875_eeprom_user].updated = data->last_updated;
-
- /* Setup the config section */
- data->blocks[max6875_eeprom_config].type = max6875_eeprom_config;
- data->blocks[max6875_eeprom_config].slices = CONFIG_EEPROM_SLICES;
- data->blocks[max6875_eeprom_config].size = CONFIG_EEPROM_SIZE;
- data->blocks[max6875_eeprom_config].base = CONFIG_EEPROM_BASE;
- data->blocks[max6875_eeprom_config].data = &data->data[USER_EEPROM_SIZE];
- data->blocks[max6875_eeprom_config].updated = &data->last_updated[USER_EEPROM_SLICES];
-
- /* Setup the register section */
- data->blocks[max6875_register_config].type = max6875_register_config;
- data->blocks[max6875_register_config].slices = CONFIG_EEPROM_SLICES;
- data->blocks[max6875_register_config].size = CONFIG_EEPROM_SIZE;
- data->blocks[max6875_register_config].base = 0;
- data->blocks[max6875_register_config].data = &data->data[USER_EEPROM_SIZE+CONFIG_EEPROM_SIZE];
- data->blocks[max6875_register_config].updated = &data->last_updated[USER_EEPROM_SLICES+CONFIG_EEPROM_SLICES];
-
- /* Init the data */
- memset(data->data, 0xff, sizeof(data->data));
-
- /* Fill in the remaining client fields */
- strlcpy(new_client->name, "max6875", I2C_NAME_SIZE);
+ /* Init real i2c_client */
+ real_client = &data->client;
+ i2c_set_clientdata(real_client, data);
+ real_client->addr = address;
+ real_client->adapter = adapter;
+ real_client->driver = &max6875_driver;
+ real_client->flags = 0;
+ strlcpy(real_client->name, "max6875", I2C_NAME_SIZE);
init_MUTEX(&data->update_lock);
- /* Verify that the chip is really what we think it is */
- if ((max6875_update_slice(new_client, &data->blocks[max6875_eeprom_config], 4) < 0) ||
- (max6875_update_slice(new_client, &data->blocks[max6875_register_config], 4) < 0))
- goto exit_kfree;
+ /* Init fake client data */
+ /* set the client data to the i2c_client so that it will get freed */
+ i2c_set_clientdata(fake_client, fake_client);
+ fake_client->addr = address | 1;
+ fake_client->adapter = adapter;
+ fake_client->driver = &max6875_driver;
+ fake_client->flags = 0;
+ strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE);
- /* 0x41,0x42 must be zero and 0x40 must match in eeprom and registers */
- if ((data->blocks[max6875_eeprom_config].data[0x41] != 0) ||
- (data->blocks[max6875_eeprom_config].data[0x42] != 0) ||
- (data->blocks[max6875_register_config].data[0x41] != 0) ||
- (data->blocks[max6875_register_config].data[0x42] != 0) ||
- (data->blocks[max6875_eeprom_config].data[0x40] !=
- data->blocks[max6875_register_config].data[0x40]))
- goto exit_kfree;
+ /* Prevent 24RF08 corruption (in case of user error) */
+ i2c_smbus_write_quick(real_client, 0);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_kfree;
+ if ((err = i2c_attach_client(real_client)) != 0)
+ goto exit_kfree2;
- /* create the sysfs eeprom files with the correct permissions */
- if (allow_write == 0) {
- user_eeprom_attr.attr.mode &= ~S_IWUGO;
- user_eeprom_attr.write = NULL;
- config_eeprom_attr.attr.mode &= ~S_IWUGO;
- config_eeprom_attr.write = NULL;
- config_register_attr.attr.mode &= ~S_IWUGO;
- config_register_attr.write = NULL;
- }
- sysfs_create_bin_file(&new_client->dev.kobj, &user_eeprom_attr);
- sysfs_create_bin_file(&new_client->dev.kobj, &config_eeprom_attr);
- sysfs_create_bin_file(&new_client->dev.kobj, &config_register_attr);
+ if ((err = i2c_attach_client(fake_client)) != 0)
+ goto exit_detach;
+
+ sysfs_create_bin_file(&real_client->dev.kobj, &user_eeprom_attr);
return 0;
-exit_kfree:
+exit_detach:
+ i2c_detach_client(real_client);
+exit_kfree2:
+ kfree(fake_client);
+exit_kfree1:
kfree(data);
-exit:
return err;
}
@@ -450,13 +236,9 @@
int err;
err = i2c_detach_client(client);
- if (err) {
- dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
+ if (err)
return err;
- }
-
kfree(i2c_get_clientdata(client));
-
return 0;
}
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 9f3ad45..225577fd 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -13,14 +13,12 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon-sysfs.h>
-#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END};
-static unsigned int normal_isa[] = {I2C_CLIENT_ISA_END};
/* Insmod parameters */
-SENSORS_INSMOD_1(pca9539);
+I2C_CLIENT_INSMOD_1(pca9539);
enum pca9539_cmd
{
@@ -109,10 +107,10 @@
static int pca9539_attach_adapter(struct i2c_adapter *adapter)
{
- return i2c_detect(adapter, &addr_data, pca9539_detect);
+ return i2c_probe(adapter, &addr_data, pca9539_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
@@ -164,10 +162,8 @@
{
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
kfree(i2c_get_clientdata(client));
return 0;
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index cfcf646..6525743 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -39,16 +39,14 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_2(pcf8574, pcf8574a);
+I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
/* Initial values */
#define PCF8574_INIT 255 /* All outputs on (input mode) */
@@ -113,10 +111,10 @@
static int pcf8574_attach_adapter(struct i2c_adapter *adapter)
{
- return i2c_detect(adapter, &addr_data, pcf8574_detect);
+ return i2c_probe(adapter, &addr_data, pcf8574_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
@@ -186,11 +184,8 @@
{
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
kfree(i2c_get_clientdata(client));
return 0;
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index db812ad..80f1df9 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -24,15 +24,13 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(pcf8591);
+I2C_CLIENT_INSMOD_1(pcf8591);
static int input_mode;
module_param(input_mode, int, 0);
@@ -164,10 +162,10 @@
*/
static int pcf8591_attach_adapter(struct i2c_adapter *adapter)
{
- return i2c_detect(adapter, &addr_data, pcf8591_detect);
+ return i2c_probe(adapter, &addr_data, pcf8591_detect);
}
-/* This function is called by i2c_detect */
+/* This function is called by i2c_probe */
int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
@@ -241,11 +239,8 @@
{
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
kfree(i2c_get_clientdata(client));
return 0;
diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c
index 588fc22..0b5385c 100644
--- a/drivers/i2c/chips/rtc8564.c
+++ b/drivers/i2c/chips/rtc8564.c
@@ -67,7 +67,6 @@
.normal_i2c = normal_addr,
.probe = ignore,
.ignore = ignore,
- .force = ignore,
};
static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 4a9ead2..dda472e 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -61,7 +61,7 @@
return rc;
}
-static struct bus_type i2c_bus_type = {
+struct bus_type i2c_bus_type = {
.name = "i2c",
.match = i2c_device_match,
.suspend = i2c_bus_suspend,
@@ -78,13 +78,13 @@
return 0;
}
-static void i2c_adapter_dev_release(struct device *dev)
+void i2c_adapter_dev_release(struct device *dev)
{
struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
complete(&adap->dev_released);
}
-static struct device_driver i2c_adapter_driver = {
+struct device_driver i2c_adapter_driver = {
.name = "i2c_adapter",
.bus = &i2c_bus_type,
.probe = i2c_device_probe,
@@ -97,7 +97,7 @@
complete(&adap->class_dev_released);
}
-static struct class i2c_adapter_class = {
+struct class i2c_adapter_class = {
.name = "i2c-adapter",
.release = &i2c_adapter_class_dev_release,
};
@@ -188,6 +188,8 @@
strlcpy(adap->class_dev.class_id, adap->dev.bus_id, BUS_ID_SIZE);
class_device_register(&adap->class_dev);
+ dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
+
/* inform drivers of new adapters */
list_for_each(item,&drivers) {
driver = list_entry(item, struct i2c_driver, list);
@@ -196,8 +198,6 @@
driver->attach_adapter(adap);
}
- dev_dbg(&adap->dev, "registered as adapter #%d\n", adap->nr);
-
out_unlock:
up(&core_lists);
return res;
@@ -220,8 +220,8 @@
break;
}
if (adap_from_list != adap) {
- pr_debug("I2C: Attempting to delete an unregistered "
- "adapter\n");
+ pr_debug("i2c-core: attempting to delete unregistered "
+ "adapter [%s]\n", adap->name);
res = -EINVAL;
goto out_unlock;
}
@@ -230,9 +230,8 @@
driver = list_entry(item, struct i2c_driver, list);
if (driver->detach_adapter)
if ((res = driver->detach_adapter(adap))) {
- dev_warn(&adap->dev, "can't detach adapter "
- "while detaching driver %s: driver "
- "not detached!\n", driver->name);
+ dev_err(&adap->dev, "detach_adapter failed "
+ "for driver [%s]\n", driver->name);
goto out_unlock;
}
}
@@ -247,9 +246,8 @@
* must be deleted, as this would cause invalid states.
*/
if ((res=client->driver->detach_client(client))) {
- dev_err(&adap->dev, "adapter not "
- "unregistered, because client at "
- "address %02x can't be detached. ",
+ dev_err(&adap->dev, "detach_client failed for client "
+ "[%s] at address 0x%02x\n", client->name,
client->addr);
goto out_unlock;
}
@@ -270,7 +268,7 @@
/* free dynamically allocated bus id */
idr_remove(&i2c_adapter_idr, adap->nr);
- dev_dbg(&adap->dev, "adapter unregistered\n");
+ dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
out_unlock:
up(&core_lists);
@@ -303,7 +301,7 @@
goto out_unlock;
list_add_tail(&driver->list,&drivers);
- pr_debug("i2c-core: driver %s registered.\n", driver->name);
+ pr_debug("i2c-core: driver [%s] registered\n", driver->name);
/* now look for instances of driver on our adapters */
if (driver->flags & I2C_DF_NOTIFY) {
@@ -331,21 +329,17 @@
/* Have a look at each adapter, if clients of this driver are still
* attached. If so, detach them to be able to kill the driver
* afterwards.
- */
- pr_debug("i2c-core: unregister_driver - looking for clients.\n");
- /* removing clients does not depend on the notify flag, else
+ *
+ * Removing clients does not depend on the notify flag, else
* invalid operation might (will!) result, when using stale client
* pointers.
*/
list_for_each(item1,&adapters) {
adap = list_entry(item1, struct i2c_adapter, list);
- dev_dbg(&adap->dev, "examining adapter\n");
if (driver->detach_adapter) {
if ((res = driver->detach_adapter(adap))) {
- dev_warn(&adap->dev, "while unregistering "
- "dummy driver %s, adapter could "
- "not be detached properly; driver "
- "not unloaded!",driver->name);
+ dev_err(&adap->dev, "detach_adapter failed "
+ "for driver [%s]\n", driver->name);
goto out_unlock;
}
} else {
@@ -353,16 +347,13 @@
client = list_entry(item2, struct i2c_client, list);
if (client->driver != driver)
continue;
- pr_debug("i2c-core.o: detaching client %s:\n", client->name);
+ dev_dbg(&adap->dev, "detaching client [%s] "
+ "at 0x%02x\n", client->name,
+ client->addr);
if ((res = driver->detach_client(client))) {
- dev_err(&adap->dev, "while "
- "unregistering driver "
- "`%s', the client at "
- "address %02x of "
- "adapter could not "
- "be detached; driver "
- "not unloaded!",
- driver->name,
+ dev_err(&adap->dev, "detach_client "
+ "failed for client [%s] at "
+ "0x%02x\n", client->name,
client->addr);
goto out_unlock;
}
@@ -372,7 +363,7 @@
driver_unregister(&driver->driver);
list_del(&driver->list);
- pr_debug("i2c-core: driver unregistered: %s\n", driver->name);
+ pr_debug("i2c-core: driver [%s] unregistered\n", driver->name);
out_unlock:
up(&core_lists);
@@ -417,15 +408,12 @@
if (adapter->client_register) {
if (adapter->client_register(client)) {
- dev_warn(&adapter->dev, "warning: client_register "
- "seems to have failed for client %02x\n",
- client->addr);
+ dev_dbg(&adapter->dev, "client_register "
+ "failed for client [%s] at 0x%02x\n",
+ client->name, client->addr);
}
}
- dev_dbg(&adapter->dev, "client [%s] registered to adapter\n",
- client->name);
-
if (client->flags & I2C_CLIENT_ALLOW_USE)
client->usage_count = 0;
@@ -436,7 +424,8 @@
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
- pr_debug("registering %s\n", client->dev.bus_id);
+ dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
+ client->name, client->dev.bus_id);
device_register(&client->dev);
device_create_file(&client->dev, &dev_attr_client_name);
@@ -449,8 +438,12 @@
struct i2c_adapter *adapter = client->adapter;
int res = 0;
- if ((client->flags & I2C_CLIENT_ALLOW_USE) && (client->usage_count > 0))
+ if ((client->flags & I2C_CLIENT_ALLOW_USE)
+ && (client->usage_count > 0)) {
+ dev_warn(&client->dev, "Client [%s] still busy, "
+ "can't detach\n", client->name);
return -EBUSY;
+ }
if (adapter->client_unregister) {
res = adapter->client_unregister(client);
@@ -669,98 +662,128 @@
* Will not work for 10-bit addresses!
* ----------------------------------------------------
*/
+static int i2c_probe_address(struct i2c_adapter *adapter, int addr, int kind,
+ int (*found_proc) (struct i2c_adapter *, int, int))
+{
+ int err;
+
+ /* Make sure the address is valid */
+ if (addr < 0x03 || addr > 0x77) {
+ dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
+ addr);
+ return -EINVAL;
+ }
+
+ /* Skip if already in use */
+ if (i2c_check_addr(adapter, addr))
+ return 0;
+
+ /* Make sure there is something at this address, unless forced */
+ if (kind < 0) {
+ if (i2c_smbus_xfer(adapter, addr, 0, 0, 0,
+ I2C_SMBUS_QUICK, NULL) < 0)
+ return 0;
+
+ /* prevent 24RF08 corruption */
+ if ((addr & ~0x0f) == 0x50)
+ i2c_smbus_xfer(adapter, addr, 0, 0, 0,
+ I2C_SMBUS_QUICK, NULL);
+ }
+
+ /* Finally call the custom detection function */
+ err = found_proc(adapter, addr, kind);
+
+ /* -ENODEV can be returned if there is a chip at the given address
+ but it isn't supported by this chip driver. We catch it here as
+ this isn't an error. */
+ return (err == -ENODEV) ? 0 : err;
+}
+
int i2c_probe(struct i2c_adapter *adapter,
struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int))
{
- int addr,i,found,err;
+ int i, err;
int adap_id = i2c_adapter_id(adapter);
/* Forget it if we can't probe using SMBUS_QUICK */
if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK))
return -1;
- for (addr = 0x00; addr <= 0x7f; addr++) {
+ /* Force entries are done first, and are not affected by ignore
+ entries */
+ if (address_data->forces) {
+ unsigned short **forces = address_data->forces;
+ int kind;
- /* Skip if already in use */
- if (i2c_check_addr(adapter,addr))
- continue;
-
- /* If it is in one of the force entries, we don't do any detection
- at all */
- found = 0;
-
- for (i = 0; !found && (address_data->force[i] != I2C_CLIENT_END); i += 2) {
- if (((adap_id == address_data->force[i]) ||
- (address_data->force[i] == ANY_I2C_BUS)) &&
- (addr == address_data->force[i+1])) {
- dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n",
- adap_id, addr);
- if ((err = found_proc(adapter,addr,0)))
- return err;
- found = 1;
+ for (kind = 0; forces[kind]; kind++) {
+ for (i = 0; forces[kind][i] != I2C_CLIENT_END;
+ i += 2) {
+ if (forces[kind][i] == adap_id
+ || forces[kind][i] == ANY_I2C_BUS) {
+ dev_dbg(&adapter->dev, "found force "
+ "parameter for adapter %d, "
+ "addr 0x%02x, kind %d\n",
+ adap_id, forces[kind][i + 1],
+ kind);
+ err = i2c_probe_address(adapter,
+ forces[kind][i + 1],
+ kind, found_proc);
+ if (err)
+ return err;
+ }
}
}
- if (found)
- continue;
-
- /* If this address is in one of the ignores, we can forget about
- it right now */
- for (i = 0;
- !found && (address_data->ignore[i] != I2C_CLIENT_END);
- i += 2) {
- if (((adap_id == address_data->ignore[i]) ||
- ((address_data->ignore[i] == ANY_I2C_BUS))) &&
- (addr == address_data->ignore[i+1])) {
- dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, "
- "addr %04x\n", adap_id ,addr);
- found = 1;
- }
- }
- if (found)
- continue;
-
- /* Now, we will do a detection, but only if it is in the normal or
- probe entries */
- for (i = 0;
- !found && (address_data->normal_i2c[i] != I2C_CLIENT_END);
- i += 1) {
- if (addr == address_data->normal_i2c[i]) {
- found = 1;
- dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, "
- "addr %02x\n", adap_id, addr);
- }
- }
-
- for (i = 0;
- !found && (address_data->probe[i] != I2C_CLIENT_END);
- i += 2) {
- if (((adap_id == address_data->probe[i]) ||
- ((address_data->probe[i] == ANY_I2C_BUS))) &&
- (addr == address_data->probe[i+1])) {
- found = 1;
- dev_dbg(&adapter->dev, "found probe parameter for adapter %d, "
- "addr %04x\n", adap_id,addr);
- }
- }
- if (!found)
- continue;
-
- /* OK, so we really should examine this address. First check
- whether there is some client here at all! */
- if (i2c_smbus_xfer(adapter,addr,0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
- if ((err = found_proc(adapter,addr,-1)))
- return err;
}
- return 0;
-}
-/*
- * return id number for a specific adapter
- */
-int i2c_adapter_id(struct i2c_adapter *adap)
-{
- return adap->nr;
+ /* Probe entries are done second, and are not affected by ignore
+ entries either */
+ for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
+ if (address_data->probe[i] == adap_id
+ || address_data->probe[i] == ANY_I2C_BUS) {
+ dev_dbg(&adapter->dev, "found probe parameter for "
+ "adapter %d, addr 0x%02x\n", adap_id,
+ address_data->probe[i + 1]);
+ err = i2c_probe_address(adapter,
+ address_data->probe[i + 1],
+ -1, found_proc);
+ if (err)
+ return err;
+ }
+ }
+
+ /* Normal entries are done last, unless shadowed by an ignore entry */
+ for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) {
+ int j, ignore;
+
+ ignore = 0;
+ for (j = 0; address_data->ignore[j] != I2C_CLIENT_END;
+ j += 2) {
+ if ((address_data->ignore[j] == adap_id ||
+ address_data->ignore[j] == ANY_I2C_BUS)
+ && address_data->ignore[j + 1]
+ == address_data->normal_i2c[i]) {
+ dev_dbg(&adapter->dev, "found ignore "
+ "parameter for adapter %d, "
+ "addr 0x%02x\n", adap_id,
+ address_data->ignore[j + 1]);
+ }
+ ignore = 1;
+ break;
+ }
+ if (ignore)
+ continue;
+
+ dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
+ "addr 0x%02x\n", adap_id,
+ address_data->normal_i2c[i]);
+ err = i2c_probe_address(adapter, address_data->normal_i2c[i],
+ -1, found_proc);
+ if (err)
+ return err;
+ }
+
+ return 0;
}
struct i2c_adapter* i2c_get_adapter(int id)
@@ -1171,6 +1194,12 @@
}
+/* Next four are needed by i2c-isa */
+EXPORT_SYMBOL_GPL(i2c_adapter_dev_release);
+EXPORT_SYMBOL_GPL(i2c_adapter_driver);
+EXPORT_SYMBOL_GPL(i2c_adapter_class);
+EXPORT_SYMBOL_GPL(i2c_bus_type);
+
EXPORT_SYMBOL(i2c_add_adapter);
EXPORT_SYMBOL(i2c_del_adapter);
EXPORT_SYMBOL(i2c_add_driver);
@@ -1186,7 +1215,6 @@
EXPORT_SYMBOL(i2c_master_recv);
EXPORT_SYMBOL(i2c_control);
EXPORT_SYMBOL(i2c_transfer);
-EXPORT_SYMBOL(i2c_adapter_id);
EXPORT_SYMBOL(i2c_get_adapter);
EXPORT_SYMBOL(i2c_put_adapter);
EXPORT_SYMBOL(i2c_probe);
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index bc5d557..aa7a4fa 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -434,7 +434,8 @@
devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor),
S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor);
- dev_dbg(&adap->dev, "Registered as minor %d\n", i2c_dev->minor);
+ pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
+ adap->name, i2c_dev->minor);
/* register this i2c device with the driver core */
i2c_dev->adap = adap;
@@ -471,7 +472,7 @@
wait_for_completion(&i2c_dev->released);
kfree(i2c_dev);
- dev_dbg(&adap->dev, "Adapter unregistered\n");
+ pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
return 0;
}
diff --git a/drivers/i2c/i2c-sensor-detect.c b/drivers/i2c/i2c-sensor-detect.c
deleted file mode 100644
index f99a816..0000000
--- a/drivers/i2c/i2c-sensor-detect.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- i2c-sensor-detect.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl> and
- Mark D. Studebaker <mdsxyz123@yahoo.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-
-static unsigned short empty[] = {I2C_CLIENT_END};
-static unsigned int empty_isa[] = {I2C_CLIENT_ISA_END};
-
-/* Very inefficient for ISA detects, and won't work for 10-bit addresses! */
-int i2c_detect(struct i2c_adapter *adapter,
- struct i2c_address_data *address_data,
- int (*found_proc) (struct i2c_adapter *, int, int))
-{
- int addr, i, found, j, err;
- struct i2c_force_data *this_force;
- int is_isa = i2c_is_isa_adapter(adapter);
- int adapter_id =
- is_isa ? ANY_I2C_ISA_BUS : i2c_adapter_id(adapter);
- unsigned short *normal_i2c;
- unsigned int *normal_isa;
- unsigned short *probe;
- unsigned short *ignore;
-
- /* Forget it if we can't probe using SMBUS_QUICK */
- if ((!is_isa) &&
- !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK))
- return -1;
-
- /* Use default "empty" list if the adapter doesn't specify any */
- normal_i2c = probe = ignore = empty;
- normal_isa = empty_isa;
- if (address_data->normal_i2c)
- normal_i2c = address_data->normal_i2c;
- if (address_data->normal_isa)
- normal_isa = address_data->normal_isa;
- if (address_data->probe)
- probe = address_data->probe;
- if (address_data->ignore)
- ignore = address_data->ignore;
-
- for (addr = 0x00; addr <= (is_isa ? 0xffff : 0x7f); addr++) {
- if (!is_isa && i2c_check_addr(adapter, addr))
- continue;
-
- /* If it is in one of the force entries, we don't do any
- detection at all */
- found = 0;
- for (i = 0; !found && (this_force = address_data->forces + i, this_force->force); i++) {
- for (j = 0; !found && (this_force->force[j] != I2C_CLIENT_END); j += 2) {
- if ( ((adapter_id == this_force->force[j]) ||
- ((this_force->force[j] == ANY_I2C_BUS) && !is_isa)) &&
- (addr == this_force->force[j + 1]) ) {
- dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n", adapter_id, addr);
- if ((err = found_proc(adapter, addr, this_force->kind)))
- return err;
- found = 1;
- }
- }
- }
- if (found)
- continue;
-
- /* If this address is in one of the ignores, we can forget about it
- right now */
- for (i = 0; !found && (ignore[i] != I2C_CLIENT_END); i += 2) {
- if ( ((adapter_id == ignore[i]) ||
- ((ignore[i] == ANY_I2C_BUS) &&
- !is_isa)) &&
- (addr == ignore[i + 1])) {
- dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, addr %04x\n", adapter_id, addr);
- found = 1;
- }
- }
- if (found)
- continue;
-
- /* Now, we will do a detection, but only if it is in the normal or
- probe entries */
- if (is_isa) {
- for (i = 0; !found && (normal_isa[i] != I2C_CLIENT_ISA_END); i += 1) {
- if (addr == normal_isa[i]) {
- dev_dbg(&adapter->dev, "found normal isa entry for adapter %d, addr %04x\n", adapter_id, addr);
- found = 1;
- }
- }
- } else {
- for (i = 0; !found && (normal_i2c[i] != I2C_CLIENT_END); i += 1) {
- if (addr == normal_i2c[i]) {
- found = 1;
- dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, addr %02x\n", adapter_id, addr);
- }
- }
- }
-
- for (i = 0;
- !found && (probe[i] != I2C_CLIENT_END);
- i += 2) {
- if (((adapter_id == probe[i]) ||
- ((probe[i] == ANY_I2C_BUS) && !is_isa))
- && (addr == probe[i + 1])) {
- dev_dbg(&adapter->dev, "found probe parameter for adapter %d, addr %04x\n", adapter_id, addr);
- found = 1;
- }
- }
- if (!found)
- continue;
-
- /* OK, so we really should examine this address. First check
- whether there is some client here at all! */
- if (is_isa ||
- (i2c_smbus_xfer (adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) >= 0))
- if ((err = found_proc(adapter, addr, -1)))
- return err;
- }
- return 0;
-}
-
-EXPORT_SYMBOL(i2c_detect);
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
- "Rudolf Marek <r.marek@sh.cvut.cz>");
-
-MODULE_DESCRIPTION("i2c-sensor driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-sensor-vid.c b/drivers/i2c/i2c-sensor-vid.c
deleted file mode 100644
index 922e22f..0000000
--- a/drivers/i2c/i2c-sensor-vid.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- i2c-sensor-vid.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
-
- Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-struct vrm_model {
- u8 vendor;
- u8 eff_family;
- u8 eff_model;
- int vrm_type;
-};
-
-#define ANY 0xFF
-
-#ifdef CONFIG_X86
-
-static struct vrm_model vrm_models[] = {
- {X86_VENDOR_AMD, 0x6, ANY, 90}, /* Athlon Duron etc */
- {X86_VENDOR_AMD, 0xF, ANY, 24}, /* Athlon 64, Opteron */
- {X86_VENDOR_INTEL, 0x6, 0x9, 85}, /* 0.13um too */
- {X86_VENDOR_INTEL, 0x6, 0xB, 85}, /* 0xB Tualatin */
- {X86_VENDOR_INTEL, 0x6, ANY, 82}, /* any P6 */
- {X86_VENDOR_INTEL, 0x7, ANY, 0}, /* Itanium */
- {X86_VENDOR_INTEL, 0xF, 0x3, 100}, /* P4 Prescott */
- {X86_VENDOR_INTEL, 0xF, ANY, 90}, /* P4 before Prescott */
- {X86_VENDOR_INTEL, 0x10,ANY, 0}, /* Itanium 2 */
- {X86_VENDOR_UNKNOWN, ANY, ANY, 0} /* stop here */
- };
-
-static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
-{
- int i = 0;
-
- while (vrm_models[i].vendor!=X86_VENDOR_UNKNOWN) {
- if (vrm_models[i].vendor==vendor)
- if ((vrm_models[i].eff_family==eff_family)&& \
- ((vrm_models[i].eff_model==eff_model)|| \
- (vrm_models[i].eff_model==ANY)))
- return vrm_models[i].vrm_type;
- i++;
- }
-
- return 0;
-}
-
-int i2c_which_vrm(void)
-{
- struct cpuinfo_x86 *c = cpu_data;
- u32 eax;
- u8 eff_family, eff_model;
- int vrm_ret;
-
- if (c->x86 < 6) return 0; /* any CPU with familly lower than 6
- dont have VID and/or CPUID */
- eax = cpuid_eax(1);
- eff_family = ((eax & 0x00000F00)>>8);
- eff_model = ((eax & 0x000000F0)>>4);
- if (eff_family == 0xF) { /* use extended model & family */
- eff_family += ((eax & 0x00F00000)>>20);
- eff_model += ((eax & 0x000F0000)>>16)<<4;
- }
- vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor);
- if (vrm_ret == 0)
- printk(KERN_INFO "i2c-sensor.o: Unknown VRM version of your"
- " x86 CPU\n");
- return vrm_ret;
-}
-
-/* and now for something completely different for Non-x86 world*/
-#else
-int i2c_which_vrm(void)
-{
- printk(KERN_INFO "i2c-sensor.o: Unknown VRM version of your CPU\n");
- return 0;
-}
-#endif
-
-EXPORT_SYMBOL(i2c_which_vrm);
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 36074e6..6b1ab87 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1464,26 +1464,6 @@
{ 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block }
};
-
-#ifdef CONFIG_IEEE1394_VERBOSEDEBUG
- union i2c_smbus_data data;
-
- if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE,NULL))
- PRINT(KERN_ERR, lynx->id,"eeprom read start has failed");
- else
- {
- u16 addr;
- for (addr=0x00; addr < 0x100; addr++) {
- if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE,& data)) {
- PRINT(KERN_ERR, lynx->id, "unable to read i2c %x", addr);
- break;
- }
- else
- PRINT(KERN_DEBUG, lynx->id,"got serial eeprom data at %x: %x",addr, data.byte);
- }
- }
-#endif
-
/* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we
do it more efficiently in one transaction rather then using several reads */
if (i2c_transfer(i2c_ad, msg, 2) < 0) {
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 781f23f..6284894 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -387,8 +387,6 @@
/* exported algorithm data */
static struct i2c_algorithm saa7146_algo = {
- .name = "saa7146 i2c algorithm",
- .id = I2C_ALGO_SAA7146,
.master_xfer = saa7146_i2c_xfer,
.functionality = saa7146_i2c_func,
};
@@ -412,7 +410,7 @@
#endif
i2c_adapter->algo = &saa7146_algo;
i2c_adapter->algo_data = NULL;
- i2c_adapter->id = I2C_ALGO_SAA7146;
+ i2c_adapter->id = I2C_HW_SAA7146;
i2c_adapter->timeout = SAA7146_I2C_TIMEOUT;
i2c_adapter->retries = SAA7146_I2C_RETRIES;
}
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index be4266d..56495cb 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -172,8 +172,6 @@
}
static struct i2c_algorithm flexcop_algo = {
- .name = "FlexCop I2C algorithm",
- .id = I2C_ALGO_BIT,
.master_xfer = flexcop_master_xfer,
.functionality = flexcop_i2c_func,
};
@@ -192,7 +190,6 @@
fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
fc->i2c_adap.algo = &flexcop_algo;
fc->i2c_adap.algo_data = NULL;
- fc->i2c_adap.id = I2C_ALGO_BIT;
if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0)
return ret;
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index c3e1b66..9e96a18 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -141,8 +141,6 @@
}
static struct i2c_algorithm cxusb_i2c_algo = {
- .name = "Conexant USB I2C algorithm",
- .id = I2C_ALGO_BIT,
.master_xfer = cxusb_i2c_xfer,
.functionality = cxusb_i2c_func,
};
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index 9b9d6f8..00b9464 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -156,8 +156,6 @@
}
struct i2c_algorithm dibusb_i2c_algo = {
- .name = "DiBcom USB I2C algorithm",
- .id = I2C_ALGO_BIT,
.master_xfer = dibusb_i2c_xfer,
.functionality = dibusb_i2c_func,
};
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index 9a676afc..f70e0be 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -77,8 +77,6 @@
}
static struct i2c_algorithm digitv_i2c_algo = {
- .name = "Nebula DigiTV USB I2C algorithm",
- .id = I2C_ALGO_BIT,
.master_xfer = digitv_i2c_xfer,
.functionality = digitv_i2c_func,
};
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
index 9f0a8d9..da97094 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
@@ -27,7 +27,6 @@
#endif
d->i2c_adap.algo = d->props.i2c_algo;
d->i2c_adap.algo_data = NULL;
- d->i2c_adap.id = I2C_ALGO_BIT;
i2c_set_adapdata(&d->i2c_adap, d);
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 706e0bc..85b437b 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -633,7 +633,6 @@
i2c_set_adapdata(&pluto->i2c_adap, pluto);
strcpy(pluto->i2c_adap.name, DRIVER_NAME);
pluto->i2c_adap.owner = THIS_MODULE;
- pluto->i2c_adap.id = I2C_ALGO_BIT;
pluto->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
pluto->i2c_adap.dev.parent = &pdev->dev;
pluto->i2c_adap.algo_data = &pluto->i2c_bit;
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index aa43b5f..7daf7b1 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -1472,8 +1472,6 @@
static struct i2c_algorithm ttusb_dec_algo = {
- .name = "ttusb dec i2c algorithm",
- .id = I2C_ALGO_BIT,
.master_xfer = master_xfer,
.functionality = functionality,
};
@@ -1525,7 +1523,6 @@
#endif
ttusb->i2c_adap.algo = &ttusb_dec_algo;
ttusb->i2c_adap.algo_data = NULL;
- ttusb->i2c_adap.id = I2C_ALGO_BIT;
result = i2c_add_adapter(&ttusb->i2c_adap);
if (result) {
diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
index 48989ed..52e32f0 100644
--- a/drivers/media/video/adv7170.c
+++ b/drivers/media/video/adv7170.c
@@ -391,7 +391,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver i2c_driver_adv7170;
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index f898b65..b5ed954 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -441,7 +441,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver i2c_driver_adv7175;
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index 8733588..c6cfa7c 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -507,7 +507,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver i2c_driver_bt819;
diff --git a/drivers/media/video/bt832.c b/drivers/media/video/bt832.c
index a070417..76c1b63 100644
--- a/drivers/media/video/bt832.c
+++ b/drivers/media/video/bt832.c
@@ -188,7 +188,7 @@
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, bt832_attach);
#else
- if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848))
+ if (adap->id == I2C_HW_B_BT848)
return i2c_probe(adap, &addr_data, bt832_attach);
#endif
return 0;
@@ -241,7 +241,7 @@
};
static struct i2c_client client_template =
{
- I2C_DEVNAME("bt832"),
+ .name = "bt832",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c
index a5d529c..c13d286 100644
--- a/drivers/media/video/bt856.c
+++ b/drivers/media/video/bt856.c
@@ -295,7 +295,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver i2c_driver_bt856;
diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bttv-i2c.c
index 234a855..706dc48 100644
--- a/drivers/media/video/bttv-i2c.c
+++ b/drivers/media/video/bttv-i2c.c
@@ -109,7 +109,7 @@
#ifdef I2C_CLASS_TV_ANALOG
.class = I2C_CLASS_TV_ANALOG,
#endif
- I2C_DEVNAME("bt848"),
+ .name = "bt848",
.id = I2C_HW_B_BT848,
.client_register = attach_inform,
};
@@ -270,8 +270,6 @@
}
static struct i2c_algorithm bttv_algo = {
- .name = "bt878",
- .id = I2C_ALGO_BIT | I2C_HW_B_BT848 /* FIXME */,
.master_xfer = bttv_i2c_xfer,
.algo_control = algo_control,
.functionality = functionality,
@@ -282,8 +280,8 @@
#ifdef I2C_CLASS_TV_ANALOG
.class = I2C_CLASS_TV_ANALOG,
#endif
- I2C_DEVNAME("bt878"),
- .id = I2C_ALGO_BIT | I2C_HW_B_BT848 /* FIXME */,
+ .name = "bt878",
+ .id = I2C_HW_B_BT848 /* FIXME */,
.algo = &bttv_algo,
.client_register = attach_inform,
};
@@ -298,7 +296,7 @@
if (bttv_debug)
printk(KERN_DEBUG "bttv%d: %s i2c attach [addr=0x%x,client=%s]\n",
btv->c.nr,client->driver->name,client->addr,
- i2c_clientname(client));
+ client->name);
if (!client->driver->command)
return 0;
@@ -326,7 +324,7 @@
}
static struct i2c_client bttv_i2c_client_template = {
- I2C_DEVNAME("bttv internal"),
+ .name = "bttv internal",
};
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index a628a55..7f59803 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -95,7 +95,7 @@
struct cx88_core *core = i2c_get_adapdata(client->adapter);
dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n",
- client->driver->name,client->addr,i2c_clientname(client));
+ client->driver->name, client->addr, client->name);
if (!client->driver->command)
return 0;
@@ -128,7 +128,7 @@
{
struct cx88_core *core = i2c_get_adapdata(client->adapter);
- dprintk(1, "i2c detach [client=%s]\n", i2c_clientname(client));
+ dprintk(1, "i2c detach [client=%s]\n", client->name);
return 0;
}
@@ -152,7 +152,7 @@
/* ----------------------------------------------------------------------- */
static struct i2c_adapter cx8800_i2c_adap_template = {
- I2C_DEVNAME("cx2388x"),
+ .name = "cx2388x",
.owner = THIS_MODULE,
.id = I2C_HW_B_CX2388x,
.client_register = attach_inform,
@@ -160,7 +160,7 @@
};
static struct i2c_client cx8800_i2c_client_template = {
- I2C_DEVNAME("cx88xx internal"),
+ .name = "cx88xx internal",
};
static char *i2c_devs[128] = {
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 9fc5055..1e273ff 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -308,7 +308,7 @@
static struct i2c_client client_template =
{
- I2C_DEVNAME("unset"),
+ .name = "unset",
.driver = &driver
};
@@ -429,10 +429,10 @@
struct i2c_client c; char buf; int i,rc;
switch (adap->id) {
- case I2C_ALGO_BIT | I2C_HW_B_BT848:
+ case I2C_HW_B_BT848:
probe = probe_bttv;
break;
- case I2C_ALGO_SAA7134:
+ case I2C_HW_SAA7134:
probe = probe_saa7134;
break;
}
diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c
index e956234..ca02f6f 100644
--- a/drivers/media/video/msp3400.c
+++ b/drivers/media/video/msp3400.c
@@ -1437,7 +1437,7 @@
static struct i2c_client client_template =
{
- I2C_DEVNAME("(unset)"),
+ .name = "(unset)",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
@@ -1509,7 +1509,7 @@
}
/* hello world :-) */
- printk(KERN_INFO "msp34xx: init: chip=%s",i2c_clientname(c));
+ printk(KERN_INFO "msp34xx: init: chip=%s", c->name);
if (HAVE_NICAM(msp))
printk(" +nicam");
if (HAVE_SIMPLE(msp))
diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c
index 3433619..b3f4d26 100644
--- a/drivers/media/video/ovcamchip/ov6x20.c
+++ b/drivers/media/video/ovcamchip/ov6x20.c
@@ -164,10 +164,10 @@
DDEBUG(4, &c->dev, "entered");
switch (c->adapter->id) {
- case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511:
+ case I2C_HW_SMBUS_OV511:
rc = ov_write_regvals(c, regvals_init_6x20_511);
break;
- case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518:
+ case I2C_HW_SMBUS_OV518:
rc = ov_write_regvals(c, regvals_init_6x20_518);
break;
default:
@@ -338,7 +338,7 @@
/******** Palette-specific regs ********/
/* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */
- if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+ if (c->adapter->id == I2C_HW_SMBUS_OV518) {
if (win->format == VIDEO_PALETTE_GREY)
ov_write_mask(c, 0x13, 0x00, 0x20);
else
diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c
index 44a8423..6eab458 100644
--- a/drivers/media/video/ovcamchip/ov6x30.c
+++ b/drivers/media/video/ovcamchip/ov6x30.c
@@ -301,7 +301,7 @@
/******** Palette-specific regs ********/
if (win->format == VIDEO_PALETTE_GREY) {
- if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+ if (c->adapter->id == I2C_HW_SMBUS_OV518) {
/* Do nothing - we're already in 8-bit mode */
} else {
ov_write_mask(c, 0x13, 0x20, 0x20);
@@ -313,7 +313,7 @@
* Therefore, the OV6630 needs to be in 8-bit multiplexed
* output mode */
- if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+ if (c->adapter->id == I2C_HW_SMBUS_OV518) {
/* Do nothing - we want to stay in 8-bit mode */
/* Warning: Messing with reg 0x13 breaks OV518 color */
} else {
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
index 54dd561..2de34eb 100644
--- a/drivers/media/video/ovcamchip/ovcamchip_core.c
+++ b/drivers/media/video/ovcamchip/ovcamchip_core.c
@@ -296,10 +296,10 @@
* attach to adapters that are known to contain OV camera chips. */
switch (adap->id) {
- case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511):
- case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518):
- case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OVFX2):
- case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_W9968CF):
+ case I2C_HW_SMBUS_OV511:
+ case I2C_HW_SMBUS_OV518:
+ case I2C_HW_SMBUS_OVFX2:
+ case I2C_HW_SMBUS_W9968CF:
PDEBUG(1, "Adapter ID 0x%06x accepted", adap->id);
break;
default:
@@ -314,7 +314,7 @@
}
memcpy(c, &client_template, sizeof *c);
c->adapter = adap;
- strcpy(i2c_clientname(c), "OV????");
+ strcpy(c->name, "OV????");
ov = kmalloc(sizeof *ov, GFP_KERNEL);
if (!ov) {
@@ -328,7 +328,7 @@
if (rc < 0)
goto error;
- strcpy(i2c_clientname(c), chip_names[ov->subtype]);
+ strcpy(c->name, chip_names[ov->subtype]);
PDEBUG(1, "Camera chip detection complete");
@@ -421,7 +421,7 @@
};
static struct i2c_client client_template = {
- I2C_DEVNAME("(unset)"),
+ .name = "(unset)",
.driver = &driver,
};
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index 22d055d..e116bdb 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -470,7 +470,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver i2c_driver_saa7110;
diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c
index fcd8973..f18df53 100644
--- a/drivers/media/video/saa7111.c
+++ b/drivers/media/video/saa7111.c
@@ -489,7 +489,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver i2c_driver_saa7111;
diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
index 2ba997f..e0c70f5 100644
--- a/drivers/media/video/saa7114.c
+++ b/drivers/media/video/saa7114.c
@@ -827,7 +827,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver i2c_driver_saa7114;
diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c
index 79d05ea..382911c 100644
--- a/drivers/media/video/saa7134/saa6752hs.c
+++ b/drivers/media/video/saa7134/saa6752hs.c
@@ -598,7 +598,7 @@
static struct i2c_client client_template =
{
- I2C_DEVNAME("saa6752hs"),
+ .name = "saa6752hs",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
index 1203b93..eae6b52 100644
--- a/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -334,7 +334,7 @@
struct tuner_setup tun_setup;
d1printk( "%s i2c attach [addr=0x%x,client=%s]\n",
- client->driver->name,client->addr,i2c_clientname(client));
+ client->driver->name, client->addr, client->name);
if (!client->driver->command)
return 0;
@@ -370,8 +370,6 @@
}
static struct i2c_algorithm saa7134_algo = {
- .name = "saa7134",
- .id = I2C_ALGO_SAA7134,
.master_xfer = saa7134_i2c_xfer,
.algo_control = algo_control,
.functionality = functionality,
@@ -382,14 +380,14 @@
#ifdef I2C_CLASS_TV_ANALOG
.class = I2C_CLASS_TV_ANALOG,
#endif
- I2C_DEVNAME("saa7134"),
- .id = I2C_ALGO_SAA7134,
+ .name = "saa7134",
+ .id = I2C_HW_SAA7134,
.algo = &saa7134_algo,
.client_register = attach_inform,
};
static struct i2c_client saa7134_client_template = {
- I2C_DEVNAME("saa7134 internal"),
+ .name = "saa7134 internal",
};
/* ----------------------------------------------------------- */
diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
index 108e7a4..e93412f 100644
--- a/drivers/media/video/saa7185.c
+++ b/drivers/media/video/saa7185.c
@@ -387,7 +387,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver i2c_driver_saa7185;
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
index 7cb1fb3..255b608 100644
--- a/drivers/media/video/tda7432.c
+++ b/drivers/media/video/tda7432.c
@@ -328,7 +328,7 @@
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, tda7432_attach);
#else
- if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848))
+ if (adap->id == I2C_HW_B_BT848)
return i2c_probe(adap, &addr_data, tda7432_attach);
#endif
return 0;
@@ -513,7 +513,7 @@
static struct i2c_client client_template =
{
- I2C_DEVNAME("tda7432"),
+ .name = "tda7432",
.driver = &driver,
};
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
index c29bdfc..1794686 100644
--- a/drivers/media/video/tda9840.c
+++ b/drivers/media/video/tda9840.c
@@ -205,7 +205,7 @@
static int attach(struct i2c_adapter *adapter)
{
/* let's see whether this is a know adapter we can attach to */
- if (adapter->id != I2C_ALGO_SAA7146) {
+ if (adapter->id != I2C_HW_SAA7146) {
dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
return -ENODEV;
}
@@ -231,7 +231,7 @@
};
static struct i2c_client client_template = {
- I2C_DEVNAME("tda9840"),
+ .name = "tda9840",
.driver = &driver,
};
diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c
index 566e1a5..7e3dcdb 100644
--- a/drivers/media/video/tda9875.c
+++ b/drivers/media/video/tda9875.c
@@ -262,7 +262,7 @@
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, tda9875_attach);
#else
- if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848))
+ if (adap->id == I2C_HW_B_BT848)
return i2c_probe(adap, &addr_data, tda9875_attach);
#endif
return 0;
@@ -384,7 +384,7 @@
static struct i2c_client client_template =
{
- I2C_DEVNAME("tda9875"),
+ .name = "tda9875",
.driver = &driver,
};
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index a28a395..d60fc56 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -618,9 +618,9 @@
return i2c_probe(adap, &addr_data, tda9887_attach);
#else
switch (adap->id) {
- case I2C_ALGO_BIT | I2C_HW_B_BT848:
- case I2C_ALGO_BIT | I2C_HW_B_RIVA:
- case I2C_ALGO_SAA7134:
+ case I2C_HW_B_BT848:
+ case I2C_HW_B_RIVA:
+ case I2C_HW_SAA7134:
return i2c_probe(adap, &addr_data, tda9887_attach);
break;
}
@@ -793,7 +793,7 @@
};
static struct i2c_client client_template =
{
- I2C_DEVNAME("tda9887"),
+ .name = "tda9887",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index b44db8a..ee36883 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -86,7 +86,7 @@
static int attach(struct i2c_adapter *adapter)
{
/* let's see whether this is a know adapter we can attach to */
- if (adapter->id != I2C_ALGO_SAA7146) {
+ if (adapter->id != I2C_HW_SAA7146) {
dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
return -ENODEV;
}
@@ -200,7 +200,7 @@
};
static struct i2c_client client_template = {
- I2C_DEVNAME("tea6415c"),
+ .name = "tea6415c",
.driver = &driver,
};
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 48d4db7..17975c1 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -135,7 +135,7 @@
static int attach(struct i2c_adapter *adapter)
{
/* let's see whether this is a know adapter we can attach to */
- if (adapter->id != I2C_ALGO_SAA7146) {
+ if (adapter->id != I2C_HW_SAA7146) {
dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
return -ENODEV;
}
@@ -177,7 +177,7 @@
};
static struct i2c_client client_template = {
- I2C_DEVNAME("tea6420"),
+ .name = "tea6420",
.driver = &driver,
};
diff --git a/drivers/media/video/tuner-3036.c b/drivers/media/video/tuner-3036.c
index 7d825e5..7920359 100644
--- a/drivers/media/video/tuner-3036.c
+++ b/drivers/media/video/tuner-3036.c
@@ -41,7 +41,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
/* ---------------------------------------------------------------------- */
@@ -166,7 +165,7 @@
tuner_probe(struct i2c_adapter *adap)
{
this_adap = 0;
- if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_LP))
+ if (adap->id == I2C_HW_B_LP)
return i2c_probe(adap, &addr_data, tuner_attach);
return 0;
}
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index a155e99..3b1893c 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -709,7 +709,7 @@
},
};
static struct i2c_client client_template = {
- I2C_DEVNAME("(tuner unset)"),
+ .name = "(tuner unset)",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index f42a1ef..258724b 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -162,24 +162,23 @@
unsigned char buffer[2];
if (-1 == subaddr) {
- dprintk("%s: chip_write: 0x%x\n",
- i2c_clientname(&chip->c), val);
+ dprintk("%s: chip_write: 0x%x\n", chip->c.name, val);
chip->shadow.bytes[1] = val;
buffer[0] = val;
if (1 != i2c_master_send(&chip->c,buffer,1)) {
printk(KERN_WARNING "%s: I/O error (write 0x%x)\n",
- i2c_clientname(&chip->c), val);
+ chip->c.name, val);
return -1;
}
} else {
dprintk("%s: chip_write: reg%d=0x%x\n",
- i2c_clientname(&chip->c), subaddr, val);
+ chip->c.name, subaddr, val);
chip->shadow.bytes[subaddr+1] = val;
buffer[0] = subaddr;
buffer[1] = val;
if (2 != i2c_master_send(&chip->c,buffer,2)) {
printk(KERN_WARNING "%s: I/O error (write reg%d=0x%x)\n",
- i2c_clientname(&chip->c), subaddr, val);
+ chip->c.name, subaddr, val);
return -1;
}
}
@@ -203,11 +202,10 @@
unsigned char buffer;
if (1 != i2c_master_recv(&chip->c,&buffer,1)) {
- printk(KERN_WARNING "%s: I/O error (read)\n",
- i2c_clientname(&chip->c));
+ printk(KERN_WARNING "%s: I/O error (read)\n", chip->c.name);
return -1;
}
- dprintk("%s: chip_read: 0x%x\n",i2c_clientname(&chip->c),buffer);
+ dprintk("%s: chip_read: 0x%x\n", chip->c.name, buffer);
return buffer;
}
@@ -222,12 +220,11 @@
write[0] = subaddr;
if (2 != i2c_transfer(chip->c.adapter,msgs,2)) {
- printk(KERN_WARNING "%s: I/O error (read2)\n",
- i2c_clientname(&chip->c));
+ printk(KERN_WARNING "%s: I/O error (read2)\n", chip->c.name);
return -1;
}
dprintk("%s: chip_read2: reg%d=0x%x\n",
- i2c_clientname(&chip->c),subaddr,read[0]);
+ chip->c.name, subaddr, read[0]);
return read[0];
}
@@ -240,7 +237,7 @@
/* update our shadow register set; print bytes if (debug > 0) */
dprintk("%s: chip_cmd(%s): reg=%d, data:",
- i2c_clientname(&chip->c),name,cmd->bytes[0]);
+ chip->c.name, name, cmd->bytes[0]);
for (i = 1; i < cmd->count; i++) {
dprintk(" 0x%x",cmd->bytes[i]);
chip->shadow.bytes[i+cmd->bytes[0]] = cmd->bytes[i];
@@ -249,7 +246,7 @@
/* send data to the chip */
if (cmd->count != i2c_master_send(&chip->c,cmd->bytes,cmd->count)) {
- printk(KERN_WARNING "%s: I/O error (%s)\n", i2c_clientname(&chip->c), name);
+ printk(KERN_WARNING "%s: I/O error (%s)\n", chip->c.name, name);
return -1;
}
return 0;
@@ -274,9 +271,9 @@
struct CHIPSTATE *chip = data;
struct CHIPDESC *desc = chiplist + chip->type;
- daemonize("%s",i2c_clientname(&chip->c));
+ daemonize("%s", chip->c.name);
allow_signal(SIGTERM);
- dprintk("%s: thread started\n", i2c_clientname(&chip->c));
+ dprintk("%s: thread started\n", chip->c.name);
for (;;) {
add_wait_queue(&chip->wq, &wait);
@@ -288,7 +285,7 @@
try_to_freeze();
if (chip->done || signal_pending(current))
break;
- dprintk("%s: thread wakeup\n", i2c_clientname(&chip->c));
+ dprintk("%s: thread wakeup\n", chip->c.name);
/* don't do anything for radio or if mode != auto */
if (chip->norm == VIDEO_MODE_RADIO || chip->mode != 0)
@@ -301,7 +298,7 @@
mod_timer(&chip->wt, jiffies+2*HZ);
}
- dprintk("%s: thread exiting\n", i2c_clientname(&chip->c));
+ dprintk("%s: thread exiting\n", chip->c.name);
complete_and_exit(&chip->texit, 0);
return 0;
}
@@ -314,7 +311,7 @@
if (mode == chip->prevmode)
return;
- dprintk("%s: thread checkmode\n", i2c_clientname(&chip->c));
+ dprintk("%s: thread checkmode\n", chip->c.name);
chip->prevmode = mode;
if (mode & VIDEO_SOUND_STEREO)
@@ -1098,7 +1095,7 @@
/* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF,
/* off */ TDA8425_S1_OFF, /* on */ TDA8425_S1_CH2};
- if (chip->c.adapter->id == (I2C_ALGO_BIT | I2C_HW_B_RIVA)) {
+ if (chip->c.adapter->id == I2C_HW_B_RIVA) {
memcpy (desc->inputmap, inputmap, sizeof (inputmap));
}
return 0;
@@ -1501,7 +1498,7 @@
(desc->flags & CHIP_HAS_INPUTSEL) ? " audiomux" : "");
/* fill required data structures */
- strcpy(i2c_clientname(&chip->c),desc->name);
+ strcpy(chip->c.name, desc->name);
chip->type = desc-chiplist;
chip->shadow.count = desc->registers+1;
chip->prevmode = -1;
@@ -1538,7 +1535,7 @@
chip->tpid = kernel_thread(chip_thread,(void *)chip,0);
if (chip->tpid < 0)
printk(KERN_WARNING "%s: kernel_thread() failed\n",
- i2c_clientname(&chip->c));
+ chip->c.name);
wake_up_interruptible(&chip->wq);
}
return 0;
@@ -1548,16 +1545,16 @@
{
/* don't attach on saa7146 based cards,
because dedicated drivers are used */
- if ((adap->id & I2C_ALGO_SAA7146))
+ if (adap->id == I2C_HW_SAA7146)
return 0;
#ifdef I2C_CLASS_TV_ANALOG
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, chip_attach);
#else
switch (adap->id) {
- case I2C_ALGO_BIT | I2C_HW_B_BT848:
- case I2C_ALGO_BIT | I2C_HW_B_RIVA:
- case I2C_ALGO_SAA7134:
+ case I2C_HW_B_BT848:
+ case I2C_HW_B_RIVA:
+ case I2C_HW_SAA7134:
return i2c_probe(adap, &addr_data, chip_attach);
}
#endif
@@ -1591,7 +1588,7 @@
struct CHIPSTATE *chip = i2c_get_clientdata(client);
struct CHIPDESC *desc = chiplist + chip->type;
- dprintk("%s: chip_command 0x%x\n",i2c_clientname(&chip->c),cmd);
+ dprintk("%s: chip_command 0x%x\n", chip->c.name, cmd);
switch (cmd) {
case AUDC_SET_INPUT:
@@ -1702,7 +1699,7 @@
static struct i2c_client client_template =
{
- I2C_DEVNAME("(unset)"),
+ .name = "(unset)",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 127ec38..3c3356a 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -534,7 +534,7 @@
tveeprom_attach_adapter (struct i2c_adapter *adapter)
{
dprintk(1,"%s: id 0x%x\n",__FUNCTION__,adapter->id);
- if (adapter->id != (I2C_ALGO_BIT | I2C_HW_B_BT848))
+ if (adapter->id != I2C_HW_B_BT848)
return 0;
return i2c_probe(adapter, &addr_data, tveeprom_detect_client);
}
diff --git a/drivers/media/video/tvmixer.c b/drivers/media/video/tvmixer.c
index 51b99cd..a43301a 100644
--- a/drivers/media/video/tvmixer.c
+++ b/drivers/media/video/tvmixer.c
@@ -91,7 +91,7 @@
if (cmd == SOUND_MIXER_INFO) {
mixer_info info;
strlcpy(info.id, "tv card", sizeof(info.id));
- strlcpy(info.name, i2c_clientname(client), sizeof(info.name));
+ strlcpy(info.name, client->name, sizeof(info.name));
info.modify_counter = 42 /* FIXME */;
if (copy_to_user(argp, &info, sizeof(info)))
return -EFAULT;
@@ -100,7 +100,7 @@
if (cmd == SOUND_OLD_MIXER_INFO) {
_old_mixer_info info;
strlcpy(info.id, "tv card", sizeof(info.id));
- strlcpy(info.name, i2c_clientname(client), sizeof(info.name));
+ strlcpy(info.name, client->name, sizeof(info.name));
if (copy_to_user(argp, &info, sizeof(info)))
return -EFAULT;
return 0;
@@ -276,9 +276,9 @@
#else
/* TV card ??? */
switch (client->adapter->id) {
- case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3:
- case I2C_ALGO_BIT | I2C_HW_B_BT848:
- case I2C_ALGO_BIT | I2C_HW_B_RIVA:
+ case I2C_HW_SMBUS_VOODOO3:
+ case I2C_HW_B_BT848:
+ case I2C_HW_B_RIVA:
/* ok, have a look ... */
break;
default:
@@ -295,7 +295,7 @@
devices[i].dev = NULL;
devices[i].minor = -1;
printk("tvmixer: %s unregistered (#1)\n",
- i2c_clientname(client));
+ client->name);
return 0;
}
}
@@ -354,7 +354,7 @@
if (devices[i].minor != -1) {
unregister_sound_mixer(devices[i].minor);
printk("tvmixer: %s unregistered (#2)\n",
- i2c_clientname(devices[i].dev));
+ devices[i].dev->name);
}
}
}
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 5dbd9f6..4437bde 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -576,7 +576,6 @@
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
- .force = &ignore,
};
static struct i2c_driver vpx3220_i2c_driver;
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 2574308..eed2ace 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -737,7 +737,7 @@
};
static struct i2c_adapter zoran_i2c_adapter_template = {
- I2C_DEVNAME("zr36057"),
+ .name = "zr36057",
.id = I2C_HW_B_ZR36067,
.algo = NULL,
.client_register = zoran_i2c_client_register,
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 3faf623..dc57352 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -36,6 +36,7 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/workqueue.h>
+#include <linux/prefetch.h>
#include <net/checksum.h>
@@ -66,8 +67,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.38"
-#define DRV_MODULE_RELDATE "September 1, 2005"
+#define DRV_MODULE_VERSION "3.39"
+#define DRV_MODULE_RELDATE "September 5, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -487,7 +488,8 @@
static inline void tg3_cond_int(struct tg3 *tp)
{
- if (tp->hw_status->status & SD_STATUS_UPDATED)
+ if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
+ (tp->hw_status->status & SD_STATUS_UPDATED))
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
}
@@ -3219,18 +3221,17 @@
netdev->quota -= work_done;
}
- if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+ if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
tp->last_tag = sblk->status_tag;
- rmb();
- sblk->status &= ~SD_STATUS_UPDATED;
+ rmb();
+ } else
+ sblk->status &= ~SD_STATUS_UPDATED;
/* if no more work, tell net stack and NIC we're done */
done = !tg3_has_work(tp);
if (done) {
- spin_lock(&tp->lock);
netif_rx_complete(netdev);
tg3_restart_ints(tp);
- spin_unlock(&tp->lock);
}
return (done ? 0 : 1);
@@ -3278,8 +3279,9 @@
{
struct net_device *dev = dev_id;
struct tg3 *tp = netdev_priv(dev);
- struct tg3_hw_status *sblk = tp->hw_status;
+ prefetch(tp->hw_status);
+ prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
/*
* Writing any value to intr-mbox-0 clears PCI INTA# and
* chip-internal interrupt pending events.
@@ -3288,19 +3290,9 @@
* event coalescing.
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
- tp->last_tag = sblk->status_tag;
- rmb();
- if (tg3_irq_sync(tp))
- goto out;
- sblk->status &= ~SD_STATUS_UPDATED;
- if (likely(tg3_has_work(tp)))
+ if (likely(!tg3_irq_sync(tp)))
netif_rx_schedule(dev); /* schedule NAPI poll */
- else {
- /* No work, re-enable interrupts. */
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- tp->last_tag << 24);
- }
-out:
+
return IRQ_RETVAL(1);
}
@@ -3330,9 +3322,10 @@
if (tg3_irq_sync(tp))
goto out;
sblk->status &= ~SD_STATUS_UPDATED;
- if (likely(tg3_has_work(tp)))
+ if (likely(tg3_has_work(tp))) {
+ prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
netif_rx_schedule(dev); /* schedule NAPI poll */
- else {
+ } else {
/* No work, shared interrupt perhaps? re-enable
* interrupts, and flush that PCI write
*/
@@ -3358,7 +3351,7 @@
* Reading the PCI State register will confirm whether the
* interrupt is ours and will flush the status block.
*/
- if ((sblk->status & SD_STATUS_UPDATED) ||
+ if ((sblk->status_tag != tp->last_tag) ||
!(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
/*
* writing any value to intr-mbox-0 clears PCI INTA# and
@@ -3369,19 +3362,17 @@
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
0x00000001);
- tp->last_tag = sblk->status_tag;
- rmb();
if (tg3_irq_sync(tp))
goto out;
- sblk->status &= ~SD_STATUS_UPDATED;
- if (likely(tg3_has_work(tp)))
- netif_rx_schedule(dev); /* schedule NAPI poll */
- else {
- /* no work, shared interrupt perhaps? re-enable
- * interrupts, and flush that PCI write
+ if (netif_rx_schedule_prep(dev)) {
+ prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
+ /* Update last_tag to mark that this status has been
+ * seen. Because interrupt may be shared, we may be
+ * racing with tg3_poll(), so only update last_tag
+ * if tg3_poll() is not scheduled.
*/
- tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- tp->last_tag << 24);
+ tp->last_tag = sblk->status_tag;
+ __netif_rx_schedule(dev);
}
} else { /* shared interrupt */
handled = 0;
@@ -5962,7 +5953,7 @@
tw32(MAC_LED_CTRL, tp->led_ctrl);
tw32(MAC_MI_STAT, MAC_MI_STAT_LNKSTAT_ATTN_ENAB);
- if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
+ if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) {
tw32_f(MAC_RX_MODE, RX_MODE_RESET);
udelay(10);
}
@@ -6244,6 +6235,7 @@
if (err)
return err;
+ tp->hw_status->status &= ~SD_STATUS_UPDATED;
tg3_enable_ints(tp);
tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
@@ -7559,6 +7551,38 @@
}
}
+static int tg3_phys_id(struct net_device *dev, u32 data)
+{
+ struct tg3 *tp = netdev_priv(dev);
+ int i;
+
+ if (!netif_running(tp->dev))
+ return -EAGAIN;
+
+ if (data == 0)
+ data = 2;
+
+ for (i = 0; i < (data * 2); i++) {
+ if ((i % 2) == 0)
+ tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
+ LED_CTRL_1000MBPS_ON |
+ LED_CTRL_100MBPS_ON |
+ LED_CTRL_10MBPS_ON |
+ LED_CTRL_TRAFFIC_OVERRIDE |
+ LED_CTRL_TRAFFIC_BLINK |
+ LED_CTRL_TRAFFIC_LED);
+
+ else
+ tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
+ LED_CTRL_TRAFFIC_OVERRIDE);
+
+ if (msleep_interruptible(500))
+ break;
+ }
+ tw32(MAC_LED_CTRL, tp->led_ctrl);
+ return 0;
+}
+
static void tg3_get_ethtool_stats (struct net_device *dev,
struct ethtool_stats *estats, u64 *tmp_stats)
{
@@ -7618,7 +7642,7 @@
if (!netif_running(tp->dev))
return -ENODEV;
- if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
+ if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)
max = TG3_SERDES_TIMEOUT_SEC;
else
max = TG3_COPPER_TIMEOUT_SEC;
@@ -7903,9 +7927,12 @@
return err;
}
-static int tg3_test_loopback(struct tg3 *tp)
+#define TG3_MAC_LOOPBACK 0
+#define TG3_PHY_LOOPBACK 1
+
+static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
{
- u32 mac_mode, send_idx, rx_start_idx, rx_idx, tx_idx, opaque_key;
+ u32 mac_mode, rx_start_idx, rx_idx, tx_idx, opaque_key;
u32 desc_idx;
struct sk_buff *skb, *rx_skb;
u8 *tx_data;
@@ -7913,18 +7940,26 @@
int num_pkts, tx_len, rx_len, i, err;
struct tg3_rx_buffer_desc *desc;
- if (!netif_running(tp->dev))
- return -ENODEV;
+ if (loopback_mode == TG3_MAC_LOOPBACK) {
+ mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
+ MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY |
+ MAC_MODE_PORT_MODE_GMII;
+ tw32(MAC_MODE, mac_mode);
+ } else if (loopback_mode == TG3_PHY_LOOPBACK) {
+ mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
+ MAC_MODE_LINK_POLARITY | MAC_MODE_PORT_MODE_GMII;
+ if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)
+ mac_mode &= ~MAC_MODE_LINK_POLARITY;
+ tw32(MAC_MODE, mac_mode);
+
+ tg3_writephy(tp, MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX |
+ BMCR_SPEED1000);
+ }
+ else
+ return -EINVAL;
err = -EIO;
- tg3_reset_hw(tp);
-
- mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
- MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY |
- MAC_MODE_PORT_MODE_GMII;
- tw32(MAC_MODE, mac_mode);
-
tx_len = 1514;
skb = dev_alloc_skb(tx_len);
tx_data = skb_put(skb, tx_len);
@@ -7945,15 +7980,15 @@
rx_start_idx = tp->hw_status->idx[0].rx_producer;
- send_idx = 0;
num_pkts = 0;
- tg3_set_txd(tp, send_idx, map, tx_len, 0, 1);
+ tg3_set_txd(tp, tp->tx_prod, map, tx_len, 0, 1);
- send_idx++;
+ tp->tx_prod++;
num_pkts++;
- tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx);
+ tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW,
+ tp->tx_prod);
tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
udelay(10);
@@ -7966,7 +8001,7 @@
tx_idx = tp->hw_status->idx[0].tx_consumer;
rx_idx = tp->hw_status->idx[0].rx_producer;
- if ((tx_idx == send_idx) &&
+ if ((tx_idx == tp->tx_prod) &&
(rx_idx == (rx_start_idx + num_pkts)))
break;
}
@@ -7974,7 +8009,7 @@
pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE);
dev_kfree_skb(skb);
- if (tx_idx != send_idx)
+ if (tx_idx != tp->tx_prod)
goto out;
if (rx_idx != rx_start_idx + num_pkts)
@@ -8010,6 +8045,30 @@
return err;
}
+#define TG3_MAC_LOOPBACK_FAILED 1
+#define TG3_PHY_LOOPBACK_FAILED 2
+#define TG3_LOOPBACK_FAILED (TG3_MAC_LOOPBACK_FAILED | \
+ TG3_PHY_LOOPBACK_FAILED)
+
+static int tg3_test_loopback(struct tg3 *tp)
+{
+ int err = 0;
+
+ if (!netif_running(tp->dev))
+ return TG3_LOOPBACK_FAILED;
+
+ tg3_reset_hw(tp);
+
+ if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
+ err |= TG3_MAC_LOOPBACK_FAILED;
+ if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
+ if (tg3_run_loopback(tp, TG3_PHY_LOOPBACK))
+ err |= TG3_PHY_LOOPBACK_FAILED;
+ }
+
+ return err;
+}
+
static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
u64 *data)
{
@@ -8050,10 +8109,8 @@
etest->flags |= ETH_TEST_FL_FAILED;
data[3] = 1;
}
- if (tg3_test_loopback(tp) != 0) {
+ if ((data[4] = tg3_test_loopback(tp)) != 0)
etest->flags |= ETH_TEST_FL_FAILED;
- data[4] = 1;
- }
tg3_full_unlock(tp);
@@ -8241,6 +8298,7 @@
.self_test_count = tg3_get_test_count,
.self_test = tg3_self_test,
.get_strings = tg3_get_strings,
+ .phys_id = tg3_phys_id,
.get_stats_count = tg3_get_stats_count,
.get_ethtool_stats = tg3_get_ethtool_stats,
.get_coalesce = tg3_get_coalesce,
@@ -8305,7 +8363,8 @@
tw32(NVRAM_CFG1, nvcfg1);
}
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)) {
switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
tp->nvram_jedecnum = JEDEC_ATMEL;
@@ -8719,8 +8778,9 @@
if (i == (len - 4))
nvram_cmd |= NVRAM_CMD_LAST;
- if ((tp->nvram_jedecnum == JEDEC_ST) &&
- (nvram_cmd & NVRAM_CMD_FIRST)) {
+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752) &&
+ (tp->nvram_jedecnum == JEDEC_ST) &&
+ (nvram_cmd & NVRAM_CMD_FIRST)) {
if ((ret = tg3_nvram_exec_cmd(tp,
NVRAM_CMD_WREN | NVRAM_CMD_GO |
diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h
index 1e49a88..66bb590 100644
--- a/drivers/net/wireless/ipw2200.h
+++ b/drivers/net/wireless/ipw2200.h
@@ -46,6 +46,7 @@
#include <linux/firmware.h>
#include <linux/wireless.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <net/ieee80211.h>
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 7bac2f7..a1178a6 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -20,27 +20,18 @@
#include <asm/hardware.h>
#include <asm/irq.h>
-
#include <asm/hardware/scoop.h>
-#include <asm/arch/corgi.h>
#include <asm/arch/pxa-regs.h>
#include "soc_common.h"
#define NO_KEEP_VS 0x0001
-static unsigned char keep_vs;
-static unsigned char keep_rd;
-
-static struct pcmcia_irqs irqs[] = {
- { 0, CORGI_IRQ_GPIO_CF_CD, "PCMCIA0 CD"},
-};
-
-static void sharpsl_pcmcia_init_reset(void)
+static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
{
- reset_scoop(&corgiscoop_device.dev);
- keep_vs = NO_KEEP_VS;
- keep_rd = 0;
+ reset_scoop(scoopdev->dev);
+ scoopdev->keep_vs = NO_KEEP_VS;
+ scoopdev->keep_rd = 0;
}
static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -71,29 +62,35 @@
pxa_gpio_mode(GPIO57_nIOIS16_MD);
/* Register interrupts */
- ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (scoop_devs[skt->nr].cd_irq >= 0) {
+ struct pcmcia_irqs cd_irq;
- if (ret) {
- printk(KERN_ERR "Request for Compact Flash IRQ failed\n");
- return ret;
+ cd_irq.sock = skt->nr;
+ cd_irq.irq = scoop_devs[skt->nr].cd_irq;
+ cd_irq.str = scoop_devs[skt->nr].cd_irq_str;
+ ret = soc_pcmcia_request_irqs(skt, &cd_irq, 1);
+
+ if (ret) {
+ printk(KERN_ERR "Request for Compact Flash IRQ failed\n");
+ return ret;
+ }
}
- /* Enable interrupt */
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR, 0x00C0);
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR, 0x0101);
- keep_vs = NO_KEEP_VS;
-
- skt->irq = CORGI_IRQ_GPIO_CF_IRQ;
+ skt->irq = scoop_devs[skt->nr].irq;
return 0;
}
static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (scoop_devs[skt->nr].cd_irq >= 0) {
+ struct pcmcia_irqs cd_irq;
- /* CF_BUS_OFF */
- sharpsl_pcmcia_init_reset();
+ cd_irq.sock = skt->nr;
+ cd_irq.irq = scoop_devs[skt->nr].cd_irq;
+ cd_irq.str = scoop_devs[skt->nr].cd_irq_str;
+ soc_pcmcia_free_irqs(skt, &cd_irq, 1);
+ }
}
@@ -101,31 +98,32 @@
struct pcmcia_state *state)
{
unsigned short cpr, csr;
+ struct device *scoop = scoop_devs[skt->nr].dev;
- cpr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR);
+ cpr = read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR);
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_IRM, 0x00FF);
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_ISR, 0x0000);
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_IRM, 0x0000);
- csr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CSR);
+ write_scoop_reg(scoop, SCOOP_IRM, 0x00FF);
+ write_scoop_reg(scoop, SCOOP_ISR, 0x0000);
+ write_scoop_reg(scoop, SCOOP_IRM, 0x0000);
+ csr = read_scoop_reg(scoop, SCOOP_CSR);
if (csr & 0x0004) {
/* card eject */
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000);
- keep_vs = NO_KEEP_VS;
+ write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
+ scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
}
- else if (!(keep_vs & NO_KEEP_VS)) {
+ else if (!(scoop_devs[skt->nr].keep_vs & NO_KEEP_VS)) {
/* keep vs1,vs2 */
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000);
- csr |= keep_vs;
+ write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
+ csr |= scoop_devs[skt->nr].keep_vs;
}
else if (cpr & 0x0003) {
/* power on */
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000);
- keep_vs = (csr & 0x00C0);
+ write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
+ scoop_devs[skt->nr].keep_vs = (csr & 0x00C0);
}
else {
/* card detect */
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0002);
+ write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
}
state->detect = (csr & 0x0004) ? 0 : 1;
@@ -147,6 +145,7 @@
const socket_state_t *state)
{
unsigned long flags;
+ struct device *scoop = scoop_devs[skt->nr].dev;
unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr;
@@ -166,10 +165,10 @@
local_irq_save(flags);
- nmcr = (mcr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR)) & ~0x0010;
- ncpr = (cpr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR)) & ~0x0083;
- nccr = (ccr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CCR)) & ~0x0080;
- nimr = (imr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR)) & ~0x003E;
+ nmcr = (mcr = read_scoop_reg(scoop, SCOOP_MCR)) & ~0x0010;
+ ncpr = (cpr = read_scoop_reg(scoop, SCOOP_CPR)) & ~0x0083;
+ nccr = (ccr = read_scoop_reg(scoop, SCOOP_CCR)) & ~0x0080;
+ nimr = (imr = read_scoop_reg(scoop, SCOOP_IMR)) & ~0x003E;
ncpr |= (state->Vcc == 33) ? 0x0001 :
(state->Vcc == 50) ? 0x0002 : 0;
@@ -184,22 +183,22 @@
((skt->status&SS_WRPROT) ? 0x0008 : 0);
if (!(ncpr & 0x0003)) {
- keep_rd = 0;
- } else if (!keep_rd) {
+ scoop_devs[skt->nr].keep_rd = 0;
+ } else if (!scoop_devs[skt->nr].keep_rd) {
if (nccr & 0x0080)
- keep_rd = 1;
+ scoop_devs[skt->nr].keep_rd = 1;
else
nccr |= 0x0080;
}
if (mcr != nmcr)
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR, nmcr);
+ write_scoop_reg(scoop, SCOOP_MCR, nmcr);
if (cpr != ncpr)
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR, ncpr);
+ write_scoop_reg(scoop, SCOOP_CPR, ncpr);
if (ccr != nccr)
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_CCR, nccr);
+ write_scoop_reg(scoop, SCOOP_CCR, nccr);
if (imr != nimr)
- write_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR, nimr);
+ write_scoop_reg(scoop, SCOOP_IMR, nimr);
local_irq_restore(flags);
@@ -208,10 +207,18 @@
static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
+ sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
+
+ /* Enable interrupt */
+ write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_IMR, 0x00C0);
+ write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_MCR, 0x0101);
+ scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
}
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
+ /* CF_BUS_OFF */
+ sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
}
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
@@ -223,7 +230,7 @@
.socket_init = sharpsl_pcmcia_socket_init,
.socket_suspend = sharpsl_pcmcia_socket_suspend,
.first = 0,
- .nr = 1,
+ .nr = 0,
};
static struct platform_device *sharpsl_pcmcia_device;
@@ -232,12 +239,15 @@
{
int ret;
+ sharpsl_pcmcia_ops.nr=scoop_num;
sharpsl_pcmcia_device = kmalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL);
if (!sharpsl_pcmcia_device)
return -ENOMEM;
+
memset(sharpsl_pcmcia_device, 0, sizeof(*sharpsl_pcmcia_device));
sharpsl_pcmcia_device->name = "pxa2xx-pcmcia";
sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
+ sharpsl_pcmcia_device->dev.parent=scoop_devs[0].dev;
ret = platform_device_register(sharpsl_pcmcia_device);
if (ret)
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 0cc879e..5959e67 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -269,7 +269,10 @@
__stop_tx(up);
- if (up->port.type == PORT_16C950 && tty_stop /*FIXME*/) {
+ /*
+ * We really want to stop the transmitter from sending.
+ */
+ if (up->port.type == PORT_16C950) {
up->acr |= UART_ACR_TXDIS;
serial_icr_write(up, UART_ACR, up->acr);
}
@@ -283,10 +286,11 @@
up->ier |= UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
}
+
/*
- * We only do this from uart_start
+ * Re-enable the transmitter if we disabled it.
*/
- if (tty_start && up->port.type == PORT_16C950 /*FIXME*/) {
+ if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
up->acr &= ~UART_ACR_TXDIS;
serial_icr_write(up, UART_ACR, up->acr);
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 79422a3..9f44e83 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -782,7 +782,7 @@
return -E2BIG;
}
- bus->class_dev = class_device_create(usb_host_class, MKDEV(0,0), bus->controller, "usb%d", busnum);
+ bus->class_dev = class_device_create(usb_host_class, MKDEV(0,0), bus->controller, "usb_host%d", busnum);
if (IS_ERR(bus->class_dev)) {
clear_bit(busnum, busmap.busmap);
up(&usb_bus_list_lock);
diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c
index ca9f3a3..f36c0b6 100644
--- a/drivers/usb/media/w9968cf.c
+++ b/drivers/usb/media/w9968cf.c
@@ -1523,7 +1523,6 @@
static int w9968cf_i2c_attach_inform(struct i2c_client* client)
{
struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
- const char* clientname = i2c_clientname(client);
int id = client->driver->id, err = 0;
if (id == I2C_DRIVERID_OVCAMCHIP) {
@@ -1535,12 +1534,12 @@
}
} else {
DBG(4, "Rejected client [%s] with driver [%s]",
- clientname, client->driver->name)
+ client->name, client->driver->name)
return -EINVAL;
}
DBG(5, "I2C attach client [%s] with driver [%s]",
- clientname, client->driver->name)
+ client->name, client->driver->name)
return 0;
}
@@ -1549,12 +1548,11 @@
static int w9968cf_i2c_detach_inform(struct i2c_client* client)
{
struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
- const char* clientname = i2c_clientname(client);
if (cam->sensor_client == client)
cam->sensor_client = NULL;
- DBG(5, "I2C detach client [%s]", clientname)
+ DBG(5, "I2C detach client [%s]", client->name)
return 0;
}
@@ -1573,15 +1571,13 @@
int err = 0;
static struct i2c_algorithm algo = {
- .name = "W996[87]CF algorithm",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = w9968cf_i2c_smbus_xfer,
.algo_control = w9968cf_i2c_control,
.functionality = w9968cf_i2c_func,
};
static struct i2c_adapter adap = {
- .id = I2C_ALGO_SMBUS | I2C_HW_SMBUS_W9968CF,
+ .id = I2C_HW_SMBUS_W9968CF,
.class = I2C_CLASS_CAM_DIGITAL,
.owner = THIS_MODULE,
.client_register = w9968cf_i2c_attach_inform,
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 7622441..a9d0414 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -75,7 +75,7 @@
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_ALGO_ATI;
+ chan->adapter.id = I2C_HW_B_RADEON;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->rinfo->pdev->dev;
chan->algo.setsda = radeon_gpio_setsda;
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c
index 67f8534..ad60bbb 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/matrox/matroxfb_maven.c
@@ -1271,7 +1271,7 @@
}
static int maven_attach_adapter(struct i2c_adapter* adapter) {
- if (adapter->id == (I2C_ALGO_BIT | I2C_HW_B_G400))
+ if (adapter->id == I2C_HW_B_G400)
return i2c_probe(adapter, &addr_data, &maven_detect_client);
return 0;
}
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index 3757c14..1a91bff 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -90,14 +90,13 @@
return val;
}
-#define I2C_ALGO_NVIDIA 0x0e0000
static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name)
{
int rc;
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_ALGO_NVIDIA;
+ chan->adapter.id = I2C_HW_B_NVIDIA;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->pci_dev->dev;
chan->algo.setsda = nvidia_gpio_setsda;
diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c
index da1334d..77151d8 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/riva/rivafb-i2c.c
@@ -92,14 +92,13 @@
return val;
}
-#define I2C_ALGO_RIVA 0x0e0000
static int riva_setup_i2c_bus(struct riva_i2c_chan *chan, const char *name)
{
int rc;
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_ALGO_RIVA;
+ chan->adapter.id = I2C_HW_B_RIVA;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->pdev->dev;
chan->algo.setsda = riva_gpio_setsda;
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index 024a0ce..847698b 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -137,7 +137,6 @@
return (0 != (GET_CR_DATA(chan->ioaddr) & PROSAVAGE_I2C_SDA_IN));
}
-#define I2C_ALGO_SAVAGE 0x0f0000
static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
const char *name)
{
@@ -147,7 +146,7 @@
if (add_bus && chan->par) {
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_ALGO_SAVAGE;
+ chan->adapter.id = I2C_HW_B_SAVAGE;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->pcidev->dev;
chan->algo.udelay = 40;
diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h
index 7ea771f..527404b 100644
--- a/include/asm-arm/hardware/scoop.h
+++ b/include/asm-arm/hardware/scoop.h
@@ -40,6 +40,19 @@
unsigned short io_dir;
};
+/* Structure for linking scoop devices to PCMCIA sockets */
+struct scoop_pcmcia_dev {
+ struct device *dev; /* Pointer to this socket's scoop device */
+ int irq; /* irq for socket */
+ int cd_irq;
+ const char *cd_irq_str;
+ unsigned char keep_vs;
+ unsigned char keep_rd;
+};
+
+extern int scoop_num;
+extern struct scoop_pcmcia_dev *scoop_devs;
+
void reset_scoop(struct device *dev);
unsigned short set_scoop_gpio(struct device *dev, unsigned short bit);
unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit);
diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h
index 2cf279a..96c6db7 100644
--- a/include/asm-arm/mach/time.h
+++ b/include/asm-arm/mach/time.h
@@ -47,9 +47,7 @@
#ifdef CONFIG_NO_IDLE_HZ
-#define DYN_TICK_SKIPPING (1 << 2)
#define DYN_TICK_ENABLED (1 << 1)
-#define DYN_TICK_SUITABLE (1 << 0)
struct dyn_tick_timer {
unsigned int state; /* Current state */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index b3bb326..3fa9428 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -6,6 +6,9 @@
#define VMLINUX_SYMBOL(_sym_) _sym_
#endif
+/* Align . to a 8 byte boundary equals to maximum function alignment. */
+#define ALIGN_FUNCTION() . = ALIGN(8)
+
#define RODATA \
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
*(.rodata) *(.rodata.*) \
@@ -79,12 +82,18 @@
VMLINUX_SYMBOL(__security_initcall_end) = .; \
}
+/* sched.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
#define SCHED_TEXT \
+ ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__sched_text_start) = .; \
*(.sched.text) \
VMLINUX_SYMBOL(__sched_text_end) = .;
+/* spinlock.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
#define LOCK_TEXT \
+ ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__lock_text_start) = .; \
*(.spinlock.text) \
VMLINUX_SYMBOL(__lock_text_end) = .;
diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h
index 1b5018a..7eb4004 100644
--- a/include/linux/hwmon-sysfs.h
+++ b/include/linux/hwmon-sysfs.h
@@ -33,4 +33,19 @@
.index = _index, \
}
+struct sensor_device_attribute_2 {
+ struct device_attribute dev_attr;
+ u8 index;
+ u8 nr;
+};
+#define to_sensor_dev_attr_2(_dev_attr) \
+ container_of(_dev_attr, struct sensor_device_attribute_2, dev_attr)
+
+#define SENSOR_DEVICE_ATTR_2(_name,_mode,_show,_store,_nr,_index) \
+struct sensor_device_attribute_2 sensor_dev_attr_##_name = { \
+ .dev_attr = __ATTR(_name,_mode,_show,_store), \
+ .index = _index, \
+ .nr = _nr, \
+}
+
#endif /* _LINUX_HWMON_SYSFS_H */
diff --git a/include/linux/hwmon-vid.h b/include/linux/hwmon-vid.h
new file mode 100644
index 0000000..cd4b7a0
--- /dev/null
+++ b/include/linux/hwmon-vid.h
@@ -0,0 +1,45 @@
+/*
+ hwmon-vid.h - VID/VRM/VRD voltage conversions
+
+ Originally part of lm_sensors
+ Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ With assistance from Trent Piepho <xyzzy@speakeasy.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _LINUX_HWMON_VID_H
+#define _LINUX_HWMON_VID_H
+
+int vid_from_reg(int val, int vrm);
+int vid_which_vrm(void);
+
+/* vrm is the VRM/VRD document version multiplied by 10.
+ val is in mV to avoid floating point in the kernel.
+ Returned value is the 4-, 5- or 6-bit VID code.
+ Note that only VRM 9.x is supported for now. */
+static inline int vid_to_reg(int val, int vrm)
+{
+ switch (vrm) {
+ case 91: /* VRM 9.1 */
+ case 90: /* VRM 9.0 */
+ return ((val >= 1100) && (val <= 1850) ?
+ ((18499 - val * 10) / 25 + 5) / 10 : -1);
+ default:
+ return -1;
+ }
+}
+
+#endif /* _LINUX_HWMON_VID_H */
diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h
new file mode 100644
index 0000000..0efd994
--- /dev/null
+++ b/include/linux/hwmon.h
@@ -0,0 +1,35 @@
+/*
+ hwmon.h - part of lm_sensors, Linux kernel modules for hardware monitoring
+
+ This file declares helper functions for the sysfs class "hwmon",
+ for use by sensors drivers.
+
+ Copyright (C) 2005 Mark M. Hoffman <mhoffman@lightlink.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+*/
+
+#ifndef _HWMON_H_
+#define _HWMON_H_
+
+#include <linux/device.h>
+
+struct class_device *hwmon_device_register(struct device *dev);
+
+void hwmon_device_unregister(struct class_device *cdev);
+
+/* Scale user input to sensible values */
+static inline int SENSORS_LIMIT(long value, long low, long high)
+{
+ if (value < low)
+ return low;
+ else if (value > high)
+ return high;
+ else
+ return value;
+}
+
+#endif
+
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 33f0825..44f3087 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -1,6 +1,6 @@
/* ------------------------------------------------------------------------- */
/* */
-/* i2c.h - definitions for the i2c-bus interface */
+/* i2c-id.h - identifier values for i2c drivers and adapters */
/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-1999 Simon G. Vogl
@@ -24,16 +24,6 @@
#define LINUX_I2C_ID_H
/*
- * This file is part of the i2c-bus package and contains the identifier
- * values for drivers, adapters and other folk populating these serial
- * worlds.
- *
- * These will change often (i.e. additions) , therefore this has been
- * separated from the functional interface definitions of the i2c api.
- *
- */
-
-/*
* ---- Driver types -----------------------------------------------------
* device id name + number function description, i2c address(es)
*
@@ -170,151 +160,113 @@
/*
* ---- Adapter types ----------------------------------------------------
- *
- * First, we distinguish between several algorithms to access the hardware
- * interface types, as a PCF 8584 needs other care than a bit adapter.
- */
-
-#define I2C_ALGO_NONE 0x000000
-#define I2C_ALGO_BIT 0x010000 /* bit style adapters */
-#define I2C_ALGO_PCF 0x020000 /* PCF 8584 style adapters */
-#define I2C_ALGO_ATI 0x030000 /* ATI video card */
-#define I2C_ALGO_SMBUS 0x040000
-#define I2C_ALGO_ISA 0x050000 /* lm_sensors ISA pseudo-adapter */
-#define I2C_ALGO_SAA7146 0x060000 /* SAA 7146 video decoder bus */
-#define I2C_ALGO_ACB 0x070000 /* ACCESS.bus algorithm */
-#define I2C_ALGO_IIC 0x080000 /* ITE IIC bus */
-#define I2C_ALGO_SAA7134 0x090000
-#define I2C_ALGO_MPC824X 0x0a0000 /* Motorola 8240 / 8245 */
-#define I2C_ALGO_IPMI 0x0b0000 /* IPMI dummy adapter */
-#define I2C_ALGO_IPMB 0x0c0000 /* IPMB adapter */
-#define I2C_ALGO_MPC107 0x0d0000
-#define I2C_ALGO_EC 0x100000 /* ACPI embedded controller */
-
-#define I2C_ALGO_MPC8XX 0x110000 /* MPC8xx PowerPC I2C algorithm */
-#define I2C_ALGO_OCP 0x120000 /* IBM or otherwise On-chip I2C algorithm */
-#define I2C_ALGO_BITHS 0x130000 /* enhanced bit style adapters */
-#define I2C_ALGO_IOP3XX 0x140000 /* XSCALE IOP3XX On-chip I2C alg */
-#define I2C_ALGO_SIBYTE 0x150000 /* Broadcom SiByte SOCs */
-#define I2C_ALGO_SGI 0x160000 /* SGI algorithm */
-
-#define I2C_ALGO_USB 0x170000 /* USB algorithm */
-#define I2C_ALGO_VIRT 0x180000 /* Virtual bus adapter */
-
-#define I2C_ALGO_MV64XXX 0x190000 /* Marvell mv64xxx i2c ctlr */
-#define I2C_ALGO_PCA 0x1a0000 /* PCA 9564 style adapters */
-#define I2C_ALGO_AU1550 0x1b0000 /* Au1550 PSC algorithm */
-
-#define I2C_ALGO_EXP 0x800000 /* experimental */
-
-#define I2C_ALGO_MASK 0xff0000 /* Mask for algorithms */
-#define I2C_ALGO_SHIFT 0x10 /* right shift to get index values */
-
-#define I2C_HW_ADAPS 0x10000 /* # adapter types */
-#define I2C_HW_MASK 0xffff
-
-
-/* hw specific modules that are defined per algorithm layer
*/
/* --- Bit algorithm adapters */
-#define I2C_HW_B_LP 0x00 /* Parallel port Philips style adapter */
-#define I2C_HW_B_LPC 0x01 /* Parallel port, over control reg. */
-#define I2C_HW_B_SER 0x02 /* Serial line interface */
-#define I2C_HW_B_ELV 0x03 /* ELV Card */
-#define I2C_HW_B_VELLE 0x04 /* Vellemann K8000 */
-#define I2C_HW_B_BT848 0x05 /* BT848 video boards */
-#define I2C_HW_B_WNV 0x06 /* Winnov Videums */
-#define I2C_HW_B_VIA 0x07 /* Via vt82c586b */
-#define I2C_HW_B_HYDRA 0x08 /* Apple Hydra Mac I/O */
-#define I2C_HW_B_G400 0x09 /* Matrox G400 */
-#define I2C_HW_B_I810 0x0a /* Intel I810 */
-#define I2C_HW_B_VOO 0x0b /* 3dfx Voodoo 3 / Banshee */
-#define I2C_HW_B_PPORT 0x0c /* Primitive parallel port adapter */
-#define I2C_HW_B_SAVG 0x0d /* Savage 4 */
-#define I2C_HW_B_SCX200 0x0e /* Nat'l Semi SCx200 I2C */
-#define I2C_HW_B_RIVA 0x10 /* Riva based graphics cards */
-#define I2C_HW_B_IOC 0x11 /* IOC bit-wiggling */
-#define I2C_HW_B_TSUNA 0x12 /* DEC Tsunami chipset */
-#define I2C_HW_B_FRODO 0x13 /* 2d3D, Inc. SA-1110 Development Board */
-#define I2C_HW_B_OMAHA 0x14 /* Omaha I2C interface (ARM) */
-#define I2C_HW_B_GUIDE 0x15 /* Guide bit-basher */
-#define I2C_HW_B_IXP2000 0x16 /* GPIO on IXP2000 systems */
-#define I2C_HW_B_IXP4XX 0x17 /* GPIO on IXP4XX systems */
-#define I2C_HW_B_S3VIA 0x18 /* S3Via ProSavage adapter */
-#define I2C_HW_B_ZR36067 0x19 /* Zoran-36057/36067 based boards */
-#define I2C_HW_B_PCILYNX 0x1a /* TI PCILynx I2C adapter */
-#define I2C_HW_B_CX2388x 0x1b /* connexant 2388x based tv cards */
+#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
+#define I2C_HW_B_LPC 0x010001 /* Parallel port control reg. */
+#define I2C_HW_B_SER 0x010002 /* Serial line interface */
+#define I2C_HW_B_ELV 0x010003 /* ELV Card */
+#define I2C_HW_B_VELLE 0x010004 /* Vellemann K8000 */
+#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
+#define I2C_HW_B_WNV 0x010006 /* Winnov Videums */
+#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */
+#define I2C_HW_B_HYDRA 0x010008 /* Apple Hydra Mac I/O */
+#define I2C_HW_B_G400 0x010009 /* Matrox G400 */
+#define I2C_HW_B_I810 0x01000a /* Intel I810 */
+#define I2C_HW_B_VOO 0x01000b /* 3dfx Voodoo 3 / Banshee */
+#define I2C_HW_B_PPORT 0x01000c /* Primitive parallel port adapter */
+#define I2C_HW_B_SAVG 0x01000d /* Savage 4 */
+#define I2C_HW_B_SCX200 0x01000e /* Nat'l Semi SCx200 I2C */
+#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */
+#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */
+#define I2C_HW_B_TSUNA 0x010012 /* DEC Tsunami chipset */
+#define I2C_HW_B_FRODO 0x010013 /* 2d3D SA-1110 Development Board */
+#define I2C_HW_B_OMAHA 0x010014 /* Omaha I2C interface (ARM) */
+#define I2C_HW_B_GUIDE 0x010015 /* Guide bit-basher */
+#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */
+#define I2C_HW_B_IXP4XX 0x010017 /* GPIO on IXP4XX systems */
+#define I2C_HW_B_S3VIA 0x010018 /* S3Via ProSavage adapter */
+#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */
+#define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */
+#define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */
+#define I2C_HW_B_NVIDIA 0x01001c /* nvidia framebuffer driver */
+#define I2C_HW_B_SAVAGE 0x01001d /* savage framebuffer driver */
+#define I2C_HW_B_RADEON 0x01001e /* radeon framebuffer driver */
/* --- PCF 8584 based algorithms */
-#define I2C_HW_P_LP 0x00 /* Parallel port interface */
-#define I2C_HW_P_ISA 0x01 /* generic ISA Bus inteface card */
-#define I2C_HW_P_ELEK 0x02 /* Elektor ISA Bus inteface card */
+#define I2C_HW_P_LP 0x020000 /* Parallel port interface */
+#define I2C_HW_P_ISA 0x020001 /* generic ISA Bus inteface card */
+#define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */
/* --- PCA 9564 based algorithms */
-#define I2C_HW_A_ISA 0x00 /* generic ISA Bus interface card */
+#define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
/* --- ACPI Embedded controller algorithms */
-#define I2C_HW_ACPI_EC 0x00
+#define I2C_HW_ACPI_EC 0x1f0000
/* --- MPC824x PowerPC adapters */
-#define I2C_HW_MPC824X 0x00 /* Motorola 8240 / 8245 */
+#define I2C_HW_MPC824X 0x100001 /* Motorola 8240 / 8245 */
/* --- MPC8xx PowerPC adapters */
-#define I2C_HW_MPC8XX_EPON 0x00 /* Eponymous MPC8xx I2C adapter */
+#define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */
/* --- ITE based algorithms */
-#define I2C_HW_I_IIC 0x00 /* controller on the ITE */
+#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */
/* --- PowerPC on-chip adapters */
-#define I2C_HW_OCP 0x00 /* IBM on-chip I2C adapter */
+#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
/* --- Broadcom SiByte adapters */
-#define I2C_HW_SIBYTE 0x00
+#define I2C_HW_SIBYTE 0x150000
/* --- SGI adapters */
-#define I2C_HW_SGI_VINO 0x00
-#define I2C_HW_SGI_MACE 0x01
+#define I2C_HW_SGI_VINO 0x160000
+#define I2C_HW_SGI_MACE 0x160001
/* --- XSCALE on-chip adapters */
-#define I2C_HW_IOP3XX 0x00
+#define I2C_HW_IOP3XX 0x140000
/* --- Au1550 PSC adapters adapters */
-#define I2C_HW_AU1550_PSC 0x00
+#define I2C_HW_AU1550_PSC 0x1b0000
/* --- SMBus only adapters */
-#define I2C_HW_SMBUS_PIIX4 0x00
-#define I2C_HW_SMBUS_ALI15X3 0x01
-#define I2C_HW_SMBUS_VIA2 0x02
-#define I2C_HW_SMBUS_VOODOO3 0x03
-#define I2C_HW_SMBUS_I801 0x04
-#define I2C_HW_SMBUS_AMD756 0x05
-#define I2C_HW_SMBUS_SIS5595 0x06
-#define I2C_HW_SMBUS_ALI1535 0x07
-#define I2C_HW_SMBUS_SIS630 0x08
-#define I2C_HW_SMBUS_SIS96X 0x09
-#define I2C_HW_SMBUS_AMD8111 0x0a
-#define I2C_HW_SMBUS_SCX200 0x0b
-#define I2C_HW_SMBUS_NFORCE2 0x0c
-#define I2C_HW_SMBUS_W9968CF 0x0d
-#define I2C_HW_SMBUS_OV511 0x0e /* OV511(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_OV518 0x0f /* OV518(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_OV519 0x10 /* OV519 USB 1.1 webcam IC */
-#define I2C_HW_SMBUS_OVFX2 0x11 /* Cypress/OmniVision FX2 webcam */
+#define I2C_HW_SMBUS_PIIX4 0x040000
+#define I2C_HW_SMBUS_ALI15X3 0x040001
+#define I2C_HW_SMBUS_VIA2 0x040002
+#define I2C_HW_SMBUS_VOODOO3 0x040003
+#define I2C_HW_SMBUS_I801 0x040004
+#define I2C_HW_SMBUS_AMD756 0x040005
+#define I2C_HW_SMBUS_SIS5595 0x040006
+#define I2C_HW_SMBUS_ALI1535 0x040007
+#define I2C_HW_SMBUS_SIS630 0x040008
+#define I2C_HW_SMBUS_SIS96X 0x040009
+#define I2C_HW_SMBUS_AMD8111 0x04000a
+#define I2C_HW_SMBUS_SCX200 0x04000b
+#define I2C_HW_SMBUS_NFORCE2 0x04000c
+#define I2C_HW_SMBUS_W9968CF 0x04000d
+#define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */
+#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */
+#define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */
+#define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */
/* --- ISA pseudo-adapter */
-#define I2C_HW_ISA 0x00
+#define I2C_HW_ISA 0x050000
/* --- IPMI pseudo-adapter */
-#define I2C_HW_IPMI 0x00
+#define I2C_HW_IPMI 0x0b0000
/* --- IPMB adapter */
-#define I2C_HW_IPMB 0x00
+#define I2C_HW_IPMB 0x0c0000
/* --- MCP107 adapter */
-#define I2C_HW_MPC107 0x00
+#define I2C_HW_MPC107 0x0d0000
/* --- Marvell mv64xxx i2c adapter */
-#define I2C_HW_MV64XXX 0x00
+#define I2C_HW_MV64XXX 0x190000
+
+/* --- Miscellaneous adapters */
+#define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */
+#define I2C_HW_SAA7134 0x090000 /* SAA7134 video decoder bus */
#endif /* LINUX_I2C_ID_H */
diff --git a/include/linux/i2c-isa.h b/include/linux/i2c-isa.h
new file mode 100644
index 0000000..67e3598
--- /dev/null
+++ b/include/linux/i2c-isa.h
@@ -0,0 +1,36 @@
+/*
+ * i2c-isa.h - definitions for the i2c-isa pseudo-i2c-adapter interface
+ *
+ * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LINUX_I2C_ISA_H
+#define _LINUX_I2C_ISA_H
+
+#include <linux/i2c.h>
+
+extern int i2c_isa_add_driver(struct i2c_driver *driver);
+extern int i2c_isa_del_driver(struct i2c_driver *driver);
+
+/* Detect whether we are on the isa bus. This is only useful to hybrid
+ (i2c+isa) drivers. */
+#define i2c_is_isa_adapter(adapptr) \
+ ((adapptr)->id == I2C_HW_ISA)
+#define i2c_is_isa_client(clientptr) \
+ i2c_is_isa_adapter((clientptr)->adapter)
+
+#endif /* _LINUX_I2C_ISA_H */
diff --git a/include/linux/i2c-sensor.h b/include/linux/i2c-sensor.h
deleted file mode 100644
index 21b6252..0000000
--- a/include/linux/i2c-sensor.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- i2c-sensor.h - Part of the i2c package
- was originally sensors.h - Part of lm_sensors, Linux kernel modules
- for hardware monitoring
- Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _LINUX_I2C_SENSOR_H
-#define _LINUX_I2C_SENSOR_H
-
-/* A structure containing detect information.
- Force variables overrule all other variables; they force a detection on
- that place. If a specific chip is given, the module blindly assumes this
- chip type is present; if a general force (kind == 0) is given, the module
- will still try to figure out what type of chip is present. This is useful
- if for some reasons the detect for SMBus or ISA address space filled
- fails.
- probe: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values.
- A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second is the address.
- kind: The kind of chip. 0 equals any chip.
-*/
-struct i2c_force_data {
- unsigned short *force;
- unsigned short kind;
-};
-
-/* A structure containing the detect information.
- normal_i2c: filled in by the module writer. Terminated by I2C_CLIENT_ISA_END.
- A list of I2C addresses which should normally be examined.
- normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
- A list of ISA addresses which should normally be examined.
- probe: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values.
- A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second is the address. These
- addresses are also probed, as if they were in the 'normal' list.
- ignore: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values.
- A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second is the I2C address. These
- addresses are never probed. This parameter overrules 'normal' and
- 'probe', but not the 'force' lists.
- force_data: insmod parameters. A list, ending with an element of which
- the force field is NULL.
-*/
-struct i2c_address_data {
- unsigned short *normal_i2c;
- unsigned int *normal_isa;
- unsigned short *probe;
- unsigned short *ignore;
- struct i2c_force_data *forces;
-};
-
-#define SENSORS_MODULE_PARM_FORCE(name) \
- I2C_CLIENT_MODULE_PARM(force_ ## name, \
- "List of adapter,address pairs which are unquestionably" \
- " assumed to contain a `" # name "' chip")
-
-
-/* This defines several insmod variables, and the addr_data structure */
-#define SENSORS_INSMOD \
- I2C_CLIENT_MODULE_PARM(probe, \
- "List of adapter,address pairs to scan additionally"); \
- I2C_CLIENT_MODULE_PARM(ignore, \
- "List of adapter,address pairs not to scan"); \
- static struct i2c_address_data addr_data = { \
- .normal_i2c = normal_i2c, \
- .normal_isa = normal_isa, \
- .probe = probe, \
- .ignore = ignore, \
- .forces = forces, \
- }
-
-/* The following functions create an enum with the chip names as elements.
- The first element of the enum is any_chip. These are the only macros
- a module will want to use. */
-
-#define SENSORS_INSMOD_0 \
- enum chips { any_chip }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- static struct i2c_force_data forces[] = {{force,any_chip},{NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_1(chip1) \
- enum chips { any_chip, chip1 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- static struct i2c_force_data forces[] = {{force,any_chip},\
- {force_ ## chip1,chip1}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_2(chip1,chip2) \
- enum chips { any_chip, chip1, chip2 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_3(chip1,chip2,chip3) \
- enum chips { any_chip, chip1, chip2, chip3 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_4(chip1,chip2,chip3,chip4) \
- enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_5(chip1,chip2,chip3,chip4,chip5) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {force_ ## chip5,chip5}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_6(chip1,chip2,chip3,chip4,chip5,chip6) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {force_ ## chip5,chip5}, \
- {force_ ## chip6,chip6}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_7(chip1,chip2,chip3,chip4,chip5,chip6,chip7) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- SENSORS_MODULE_PARM_FORCE(chip7); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {force_ ## chip5,chip5}, \
- {force_ ## chip6,chip6}, \
- {force_ ## chip7,chip7}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_8(chip1,chip2,chip3,chip4,chip5,chip6,chip7,chip8) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- SENSORS_MODULE_PARM_FORCE(chip7); \
- SENSORS_MODULE_PARM_FORCE(chip8); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {force_ ## chip5,chip5}, \
- {force_ ## chip6,chip6}, \
- {force_ ## chip7,chip7}, \
- {force_ ## chip8,chip8}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-/* Detect function. It iterates over all possible addresses itself. For
- SMBus addresses, it will only call found_proc if some client is connected
- to the SMBus (unless a 'force' matched); for ISA detections, this is not
- done. */
-extern int i2c_detect(struct i2c_adapter *adapter,
- struct i2c_address_data *address_data,
- int (*found_proc) (struct i2c_adapter *, int, int));
-
-
-/* This macro is used to scale user-input to sensible values in almost all
- chip drivers. */
-static inline int SENSORS_LIMIT(long value, long low, long high)
-{
- if (value < low)
- return low;
- else if (value > high)
- return high;
- else
- return value;
-}
-#endif /* def _LINUX_I2C_SENSOR_H */
diff --git a/include/linux/i2c-vid.h b/include/linux/i2c-vid.h
deleted file mode 100644
index 41d0635..0000000
--- a/include/linux/i2c-vid.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- i2c-vid.h - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
- With assistance from Trent Piepho <xyzzy@speakeasy.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*
- This file contains common code for decoding VID pins.
- This file is #included in various chip drivers in this directory.
- As the user is unlikely to load more than one driver which
- includes this code we don't worry about the wasted space.
- Reference: VRM x.y DC-DC Converter Design Guidelines,
- available at http://developer.intel.com
-*/
-
-/*
- AMD Opteron processors don't follow the Intel VRM spec.
- I'm going to "make up" 2.4 as the VRM spec for the Opterons.
- No good reason just a mnemonic for the 24x Opteron processor
- series
-
- Opteron VID encoding is:
-
- 00000 = 1.550 V
- 00001 = 1.525 V
- . . . .
- 11110 = 0.800 V
- 11111 = 0.000 V (off)
- */
-
-/*
- Legal val values 0x00 - 0x1f; except for VRD 10.0, 0x00 - 0x3f.
- vrm is the Intel VRM document version.
- Note: vrm version is scaled by 10 and the return value is scaled by 1000
- to avoid floating point in the kernel.
-*/
-
-int i2c_which_vrm(void);
-
-#define DEFAULT_VRM 82
-
-static inline int vid_from_reg(int val, int vrm)
-{
- int vid;
-
- switch(vrm) {
-
- case 0:
- return 0;
-
- case 100: /* VRD 10.0 */
- if((val & 0x1f) == 0x1f)
- return 0;
- if((val & 0x1f) <= 0x09 || val == 0x0a)
- vid = 10875 - (val & 0x1f) * 250;
- else
- vid = 18625 - (val & 0x1f) * 250;
- if(val & 0x20)
- vid -= 125;
- vid /= 10; /* only return 3 dec. places for now */
- return vid;
-
- case 24: /* Opteron processor */
- return(val == 0x1f ? 0 : 1550 - val * 25);
-
- case 91: /* VRM 9.1 */
- case 90: /* VRM 9.0 */
- return(val == 0x1f ? 0 :
- 1850 - val * 25);
-
- case 85: /* VRM 8.5 */
- return((val & 0x10 ? 25 : 0) +
- ((val & 0x0f) > 0x04 ? 2050 : 1250) -
- ((val & 0x0f) * 50));
-
- case 84: /* VRM 8.4 */
- val &= 0x0f;
- /* fall through */
- default: /* VRM 8.2 */
- return(val == 0x1f ? 0 :
- val & 0x10 ? 5100 - (val) * 100 :
- 2050 - (val) * 50);
- }
-}
-
-static inline int vid_to_reg(int val, int vrm)
-{
- switch (vrm) {
- case 91: /* VRM 9.1 */
- case 90: /* VRM 9.0 */
- return ((val >= 1100) && (val <= 1850) ?
- ((18499 - val * 10) / 25 + 5) / 10 : -1);
- default:
- return -1;
- }
-}
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index be837b1..be35332 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -34,6 +34,13 @@
#include <linux/device.h> /* for struct device */
#include <asm/semaphore.h>
+/* --- For i2c-isa ---------------------------------------------------- */
+
+extern void i2c_adapter_dev_release(struct device *dev);
+extern struct device_driver i2c_adapter_driver;
+extern struct class i2c_adapter_class;
+extern struct bus_type i2c_bus_type;
+
/* --- General options ------------------------------------------------ */
struct i2c_msg;
@@ -41,7 +48,6 @@
struct i2c_adapter;
struct i2c_client;
struct i2c_driver;
-struct i2c_client_address_data;
union i2c_smbus_data;
/*
@@ -143,12 +149,9 @@
*/
struct i2c_client {
unsigned int flags; /* div., see below */
- unsigned int addr; /* chip address - NOTE: 7bit */
+ unsigned short addr; /* chip address - NOTE: 7bit */
/* addresses are stored in the */
- /* _LOWER_ 7 bits of this char */
- /* addr: unsigned int to make lm_sensors i2c-isa adapter work
- more cleanly. It does not take any more memory space, due to
- alignment considerations */
+ /* _LOWER_ 7 bits */
struct i2c_adapter *adapter; /* the adapter we sit on */
struct i2c_driver *driver; /* and our access routines */
int usage_count; /* How many accesses currently */
@@ -160,6 +163,11 @@
};
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
+static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
+{
+ return to_i2c_client(container_of(kobj, struct device, kobj));
+}
+
static inline void *i2c_get_clientdata (struct i2c_client *dev)
{
return dev_get_drvdata (&dev->dev);
@@ -170,13 +178,6 @@
dev_set_drvdata (&dev->dev, data);
}
-#define I2C_DEVNAME(str) .name = str
-
-static inline char *i2c_clientname(struct i2c_client *c)
-{
- return &c->name[0];
-}
-
/*
* The following structs are for those who like to implement new bus drivers:
* i2c_algorithm is the interface to a class of hardware solutions which can
@@ -184,9 +185,6 @@
* to name two of the most common.
*/
struct i2c_algorithm {
- char name[32]; /* textual description */
- unsigned int id;
-
/* If an adapter algorithm can't do I2C-level access, set master_xfer
to NULL. If an adapter algorithm can do SMBus access, set
smbus_xfer. If set to NULL, the SMBus protocol is simulated
@@ -214,8 +212,7 @@
*/
struct i2c_adapter {
struct module *owner;
- unsigned int id;/* == is algo->id | hwdep.struct->id, */
- /* for registered values see below */
+ unsigned int id;
unsigned int class;
struct i2c_algorithm *algo;/* the algorithm to access the bus */
void *algo_data;
@@ -292,12 +289,11 @@
unsigned short *normal_i2c;
unsigned short *probe;
unsigned short *ignore;
- unsigned short *force;
+ unsigned short **forces;
};
/* Internal numbers to terminate lists */
#define I2C_CLIENT_END 0xfffeU
-#define I2C_CLIENT_ISA_END 0xfffefffeU
/* The numbers to use to set I2C bus address */
#define ANY_I2C_BUS 0xffff
@@ -356,10 +352,6 @@
*/
extern int i2c_control(struct i2c_client *,unsigned int, unsigned long);
-/* This call returns a unique low identifier for each registered adapter,
- * or -1 if the adapter was not registered.
- */
-extern int i2c_adapter_id(struct i2c_adapter *adap);
extern struct i2c_adapter* i2c_get_adapter(int id);
extern void i2c_put_adapter(struct i2c_adapter *adap);
@@ -376,6 +368,12 @@
return (func & i2c_get_functionality(adap)) == func;
}
+/* Return id number for a specific adapter */
+static inline int i2c_adapter_id(struct i2c_adapter *adap)
+{
+ return adap->nr;
+}
+
/*
* I2C Message - used for pure i2c transaction, also from /dev interface
*/
@@ -510,9 +508,6 @@
#define I2C_FUNCS 0x0705 /* Get the adapter functionality */
#define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/
#define I2C_PEC 0x0708 /* != 0 for SMBus PEC */
-#if 0
-#define I2C_ACK_TEST 0x0710 /* See if a slave is at a specific address */
-#endif
#define I2C_SMBUS 0x0720 /* SMBus-level access */
@@ -556,27 +551,148 @@
module_param_array(var, short, &var##_num, 0); \
MODULE_PARM_DESC(var,desc)
-/* This is the one you want to use in your own modules */
+#define I2C_CLIENT_MODULE_PARM_FORCE(name) \
+I2C_CLIENT_MODULE_PARM(force_##name, \
+ "List of adapter,address pairs which are " \
+ "unquestionably assumed to contain a `" \
+ # name "' chip")
+
+
+#define I2C_CLIENT_INSMOD_COMMON \
+I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan " \
+ "additionally"); \
+I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \
+ "scan"); \
+static struct i2c_client_address_data addr_data = { \
+ .normal_i2c = normal_i2c, \
+ .probe = probe, \
+ .ignore = ignore, \
+ .forces = forces, \
+}
+
+/* These are the ones you want to use in your own drivers. Pick the one
+ which matches the number of devices the driver differenciates between. */
#define I2C_CLIENT_INSMOD \
- I2C_CLIENT_MODULE_PARM(probe, \
- "List of adapter,address pairs to scan additionally"); \
- I2C_CLIENT_MODULE_PARM(ignore, \
- "List of adapter,address pairs not to scan"); \
I2C_CLIENT_MODULE_PARM(force, \
"List of adapter,address pairs to boldly assume " \
"to be present"); \
- static struct i2c_client_address_data addr_data = { \
- .normal_i2c = normal_i2c, \
- .probe = probe, \
- .ignore = ignore, \
- .force = force, \
- }
+ static unsigned short *forces[] = { \
+ force, \
+ NULL \
+ }; \
+I2C_CLIENT_INSMOD_COMMON
-/* Detect whether we are on the isa bus. If this returns true, all i2c
- access will fail! */
-#define i2c_is_isa_client(clientptr) \
- ((clientptr)->adapter->algo->id == I2C_ALGO_ISA)
-#define i2c_is_isa_adapter(adapptr) \
- ((adapptr)->algo->id == I2C_ALGO_ISA)
+#define I2C_CLIENT_INSMOD_1(chip1) \
+enum chips { any_chip, chip1 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+static unsigned short *forces[] = { force, force_##chip1, NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_2(chip1, chip2) \
+enum chips { any_chip, chip1, chip2 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3) \
+enum chips { any_chip, chip1, chip2, chip3 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4) \
+enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, NULL}; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5) \
+enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, \
+ NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6) \
+enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, \
+ force_##chip6, NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \
+enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \
+ chip7 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip7); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, \
+ force_##chip6, force_##chip7, \
+ NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8) \
+enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \
+ chip7, chip8 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip7); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip8); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, \
+ force_##chip6, force_##chip7, \
+ force_##chip8, NULL }; \
+I2C_CLIENT_INSMOD_COMMON
#endif /* _LINUX_I2C_H */
diff --git a/include/linux/klist.h b/include/linux/klist.h
index eebf5e5..c4d1fae 100644
--- a/include/linux/klist.h
+++ b/include/linux/klist.h
@@ -9,6 +9,9 @@
* This file is rleased under the GPL v2.
*/
+#ifndef _LINUX_KLIST_H
+#define _LINUX_KLIST_H
+
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/kref.h>
@@ -31,8 +34,8 @@
struct completion n_removed;
};
-extern void klist_add_tail(struct klist * k, struct klist_node * n);
-extern void klist_add_head(struct klist * k, struct klist_node * n);
+extern void klist_add_tail(struct klist_node * n, struct klist * k);
+extern void klist_add_head(struct klist_node * n, struct klist * k);
extern void klist_del(struct klist_node * n);
extern void klist_remove(struct klist_node * n);
@@ -53,3 +56,4 @@
extern void klist_iter_exit(struct klist_iter * i);
extern struct klist_node * klist_next(struct klist_iter * i);
+#endif
diff --git a/include/media/id.h b/include/media/id.h
index a39a642..801ddef 100644
--- a/include/media/id.h
+++ b/include/media/id.h
@@ -34,8 +34,3 @@
#ifndef I2C_DRIVERID_SAA6752HS
# define I2C_DRIVERID_SAA6752HS I2C_DRIVERID_EXP0+8
#endif
-
-/* algorithms */
-#ifndef I2C_ALGO_SAA7134
-# define I2C_ALGO_SAA7134 0x090000
-#endif
diff --git a/include/net/irda/irlan_filter.h b/include/net/irda/irlan_filter.h
index 3afeb6c..492deda 100644
--- a/include/net/irda/irlan_filter.h
+++ b/include/net/irda/irlan_filter.h
@@ -28,6 +28,6 @@
void irlan_check_command_param(struct irlan_cb *self, char *param,
char *value);
void irlan_filter_request(struct irlan_cb *self, struct sk_buff *skb);
-int irlan_print_filter(struct seq_file *seq, int filter_type);
+void irlan_print_filter(struct seq_file *seq, int filter_type);
#endif /* IRLAN_FILTER_H */
diff --git a/include/net/sock.h b/include/net/sock.h
index cf62826..8c48fbe 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1377,9 +1377,10 @@
#ifdef CONFIG_SYSCTL
extern struct ctl_table core_table[];
-extern int sysctl_optmem_max;
#endif
+extern int sysctl_optmem_max;
+
extern __u32 sysctl_wmem_default;
extern __u32 sysctl_rmem_default;
diff --git a/init/Kconfig b/init/Kconfig
index 05a75c4..d5a1a12 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -77,6 +77,22 @@
object and source tree, in that order. Your total string can
be a maximum of 64 characters.
+config LOCALVERSION_AUTO
+ bool "Automatically append version information to the version string"
+ default y
+ help
+ This will try to automatically determine if the current tree is a
+ release tree by looking for git tags that
+ belong to the current top of tree revision.
+
+ A string of the format -gxxxxxxxx will be added to the localversion
+ if a git based tree is found. The string generated by this will be
+ appended after any matching localversion* files, and after the value
+ set in CONFIG_LOCALVERSION
+
+ Note: This requires Perl, and a git repository, but not necessarily
+ the git or cogito tools to be installed.
+
config SWAP
bool "Support for paging of anonymous memory (swap)"
depends on MMU
@@ -238,6 +254,8 @@
Say N if unsure.
+source "usr/Kconfig"
+
menuconfig EMBEDDED
bool "Configure standard kernel features (for small systems)"
help
@@ -260,8 +278,8 @@
help
Normally kallsyms only contains the symbols of functions, for nicer
OOPS messages. Some debuggers can use kallsyms for other
- symbols too: say Y here to include all symbols, and you
- don't care about adding 300k to the size of your kernel.
+ symbols too: say Y here to include all symbols, if you need them
+ and you don't care about adding 300k to the size of your kernel.
Say N.
diff --git a/init/Makefile b/init/Makefile
index 93a53fb..a230007 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -25,4 +25,5 @@
include/linux/compile.h: FORCE
@echo ' CHK $@'
- @$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CC) $(CFLAGS)"
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
+ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(CFLAGS)"
diff --git a/lib/klist.c b/lib/klist.c
index 738ab81..a70c836 100644
--- a/lib/klist.c
+++ b/lib/klist.c
@@ -79,11 +79,11 @@
/**
* klist_add_head - Initialize a klist_node and add it to front.
- * @k: klist it's going on.
* @n: node we're adding.
+ * @k: klist it's going on.
*/
-void klist_add_head(struct klist * k, struct klist_node * n)
+void klist_add_head(struct klist_node * n, struct klist * k)
{
klist_node_init(k, n);
add_head(k, n);
@@ -94,11 +94,11 @@
/**
* klist_add_tail - Initialize a klist_node and add it to back.
- * @k: klist it's going on.
* @n: node we're adding.
+ * @k: klist it's going on.
*/
-void klist_add_tail(struct klist * k, struct klist_node * n)
+void klist_add_tail(struct klist_node * n, struct klist * k)
{
klist_node_init(k, n);
add_tail(k, n);
diff --git a/net/atm/ioctl.c b/net/atm/ioctl.c
index 4dbb5af..d89056e 100644
--- a/net/atm/ioctl.c
+++ b/net/atm/ioctl.c
@@ -21,6 +21,7 @@
#include "resources.h"
#include "signaling.h" /* for WAITING and sigd_attach */
+#include "common.h"
static DECLARE_MUTEX(ioctl_mutex);
diff --git a/net/core/filter.c b/net/core/filter.c
index cd91a24..079c2ed 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -182,7 +182,7 @@
A = ntohl(*(u32 *)ptr);
continue;
}
- return 0;
+ break;
case BPF_LD|BPF_H|BPF_ABS:
k = fentry->k;
load_h:
@@ -191,7 +191,7 @@
A = ntohs(*(u16 *)ptr);
continue;
}
- return 0;
+ break;
case BPF_LD|BPF_B|BPF_ABS:
k = fentry->k;
load_b:
@@ -200,7 +200,7 @@
A = *(u8 *)ptr;
continue;
}
- return 0;
+ break;
case BPF_LD|BPF_W|BPF_LEN:
A = skb->len;
continue;
diff --git a/net/core/sock.c b/net/core/sock.c
index ccd10fd..c1359457 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1719,8 +1719,8 @@
EXPORT_SYMBOL(sock_wmalloc);
EXPORT_SYMBOL(sock_i_uid);
EXPORT_SYMBOL(sock_i_ino);
-#ifdef CONFIG_SYSCTL
EXPORT_SYMBOL(sysctl_optmem_max);
+#ifdef CONFIG_SYSCTL
EXPORT_SYMBOL(sysctl_rmem_max);
EXPORT_SYMBOL(sysctl_wmem_max);
#endif
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index d582faa..a5905f5 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -831,7 +831,7 @@
left = stats->len - ((void *)info_element - (void *)beacon);
while (left >= sizeof(struct ieee80211_info_element_hdr)) {
if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
- IEEE80211_DEBUG_SCAN("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%d left=%d.\n",
+ IEEE80211_DEBUG_SCAN("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%Zd left=%d.\n",
info_element->len + sizeof(struct ieee80211_info_element),
left);
return 1;
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 63e1066..953129d 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -54,6 +54,7 @@
#include <linux/major.h>
#include <linux/root_dev.h>
#include <linux/delay.h>
+#include <linux/nfs_fs.h>
#include <net/arp.h>
#include <net/ip.h>
#include <net/ipconfig.h>
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index cbcc9fc..f3f0013 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -769,10 +769,10 @@
if (off == PAGE_SIZE) {
put_page(page);
TCP_PAGE(sk) = page = NULL;
- TCP_OFF(sk) = off = 0;
+ off = 0;
}
} else
- BUG_ON(off);
+ off = 0;
if (copy > PAGE_SIZE - off)
copy = PAGE_SIZE - off;
diff --git a/net/irda/irlan/irlan_filter.c b/net/irda/irlan/irlan_filter.c
index 343c5d4..ca7d358 100644
--- a/net/irda/irlan/irlan_filter.c
+++ b/net/irda/irlan/irlan_filter.c
@@ -27,6 +27,7 @@
#include <linux/seq_file.h>
#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_filter.h>
/*
* Function irlan_filter_request (self, skb)
diff --git a/net/irda/qos.c b/net/irda/qos.c
index df732d5..ddfb5c5 100644
--- a/net/irda/qos.c
+++ b/net/irda/qos.c
@@ -37,6 +37,7 @@
#include <net/irda/parameters.h>
#include <net/irda/qos.h>
#include <net/irda/irlap.h>
+#include <net/irda/irlap_frame.h>
/*
* Maximum values of the baud rate we negociate with the other end.
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index e089f17..49a3900 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -344,14 +344,14 @@
} while(nfnl && nfnl->sk_receive_queue.qlen);
}
-void __exit nfnetlink_exit(void)
+static void __exit nfnetlink_exit(void)
{
printk("Removing netfilter NETLINK layer.\n");
sock_release(nfnl->sk_socket);
return;
}
-int __init nfnetlink_init(void)
+static int __init nfnetlink_init(void)
{
printk("Netfilter messages via NETLINK v%s.\n", nfversion);
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index e3a5285..249bddb 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -76,17 +76,6 @@
static DEFINE_RWLOCK(instances_lock);
-u_int64_t htonll(u_int64_t in)
-{
- u_int64_t out;
- int i;
-
- for (i = 0; i < sizeof(u_int64_t); i++)
- ((u_int8_t *)&out)[sizeof(u_int64_t)-1] = ((u_int8_t *)&in)[i];
-
- return out;
-}
-
#define INSTANCE_BUCKETS 16
static struct hlist_head instance_table[INSTANCE_BUCKETS];
@@ -497,8 +486,8 @@
if (entry->skb->tstamp.off_sec) {
struct nfqnl_msg_packet_timestamp ts;
- ts.sec = htonll(skb_tv_base.tv_sec + entry->skb->tstamp.off_sec);
- ts.usec = htonll(skb_tv_base.tv_usec + entry->skb->tstamp.off_usec);
+ ts.sec = cpu_to_be64(skb_tv_base.tv_sec + entry->skb->tstamp.off_sec);
+ ts.usec = cpu_to_be64(skb_tv_base.tv_usec + entry->skb->tstamp.off_usec);
NFA_PUT(skb, NFQA_TIMESTAMP, sizeof(ts), &ts);
}
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index dc48934..75b28dd 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -42,6 +42,7 @@
*/
#include <net/sctp/structs.h>
+#include <net/sctp/sctp.h>
#include <linux/sysctl.h>
static ctl_handler sctp_sysctl_jiffies_ms;
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
new file mode 100644
index 0000000..9087273
--- /dev/null
+++ b/scripts/Kbuild.include
@@ -0,0 +1,96 @@
+####
+# kbuild: Generic definitions
+
+# Convinient variables
+comma := ,
+empty :=
+space := $(empty) $(empty)
+
+###
+# The temporary file to save gcc -MD generated dependencies must not
+# contain a comma
+depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
+
+###
+# filechk is used to check if the content of a generated file is updated.
+# Sample usage:
+# define filechk_sample
+# echo $KERNELRELEASE
+# endef
+# version.h : Makefile
+# $(call filechk,sample)
+# The rule defined shall write to stdout the content of the new file.
+# The existing file will be compared with the new one.
+# - If no file exist it is created
+# - If the content differ the new file is used
+# - If they are equal no change, and no timestamp update
+# - stdin is piped in from the first prerequisite ($<) so one has
+# to specify a valid file as first prerequisite (often the kbuild file)
+define filechk
+ $(Q)set -e; \
+ echo ' CHK $@'; \
+ mkdir -p $(dir $@); \
+ $(filechk_$(1)) < $< > $@.tmp; \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ echo ' UPD $@'; \
+ mv -f $@.tmp $@; \
+ fi
+endef
+
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
+# Usage:
+# $(Q)$(MAKE) $(build)=dir
+build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+
+# If quiet is set, only print short version of command
+cmd = @$(if $($(quiet)cmd_$(1)),\
+ echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
+
+###
+# if_changed - execute command if any prerequisite is newer than
+# target, or command line has changed
+# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
+# including used config symbols
+# if_changed_rule - as if_changed but execute rule instead
+# See Documentation/kbuild/makefiles.txt for more info
+
+ifneq ($(KBUILD_NOCMDDEP),1)
+# Check if both arguments has same arguments. Result in empty string if equal
+# User may override this check using make KBUILD_NOCMDDEP=1
+arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
+endif
+
+# echo command. Short version is $(quiet) equals quiet, otherwise full command
+echo-cmd = $(if $($(quiet)cmd_$(1)), \
+ echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';)
+
+# function to only execute the passed command if necessary
+# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
+# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
+#
+if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+ @set -e; \
+ $(echo-cmd) \
+ $(cmd_$(1)); \
+ echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
+
+# execute the command and also postprocess generated .d dependencies
+# file
+if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
+ $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+ @set -e; \
+ $(echo-cmd) \
+ $(cmd_$(1)); \
+ scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
+ rm -f $(depfile); \
+ mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
+
+# Usage: $(call if_changed_rule,foo)
+# will check if $(cmd_foo) changed, or any of the prequisites changed,
+# and if so will execute $(rule_foo)
+if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
+ @set -e; \
+ $(rule_$(1)))
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 76ba6be..506e3f3 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -10,8 +10,11 @@
# Read .config if it exist, otherwise ignore
-include .config
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
+include scripts/Kbuild.include
include scripts/Makefile.lib
ifdef host-progs
@@ -169,7 +172,7 @@
-T $(@D)/.tmp_$(@F:.o=.ver); \
rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
else \
- mv $(@D)/.tmp_$(@F) $@; \
+ mv -f $(@D)/.tmp_$(@F) $@; \
fi;
endif
diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
index ff3e87d..8974ea5 100644
--- a/scripts/Makefile.clean
+++ b/scripts/Makefile.clean
@@ -7,7 +7,14 @@
.PHONY: __clean
__clean:
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
+# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
# Figure out what we need to build from the various variables
# ==========================================================================
@@ -87,8 +94,3 @@
# If quiet is set, only print short version of command
cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
-# Usage:
-# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 2821a2b..2d51970 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -98,7 +98,8 @@
# Create executable from a single .c file
# host-csingle -> Executable
quiet_cmd_host-csingle = HOSTCC $@
- cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(HOST_LOADLIBES) -o $@ $<
+ cmd_host-csingle = $(HOSTCC) $(hostc_flags) -o $@ $< \
+ $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-csingle): %: %.c FORCE
$(call if_changed_dep,host-csingle)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 7cf75cc..0f81dcf 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -1,13 +1,3 @@
-# ===========================================================================
-# kbuild: Generic definitions
-# ===========================================================================
-
-# Standard vars
-
-comma := ,
-empty :=
-space := $(empty) $(empty)
-
# Backward compatibility - to be removed...
extra-y += $(EXTRA_TARGETS)
# Figure out what we need to build from the various variables
@@ -84,10 +74,6 @@
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
# These flags are needed for modversions and compiling, so we define them here
# already
# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
@@ -179,89 +165,4 @@
quiet_cmd_gzip = GZIP $@
cmd_gzip = gzip -f -9 < $< > $@
-# ===========================================================================
-# Generic stuff
-# ===========================================================================
-
-ifneq ($(KBUILD_NOCMDDEP),1)
-# Check if both arguments has same arguments. Result in empty string if equal
-# User may override this check using make KBUILD_NOCMDDEP=1
-arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
-
-endif
-
-# echo command. Short version is $(quiet) equals quiet, otherwise full command
-echo-cmd = $(if $($(quiet)cmd_$(1)), \
- echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';)
-
-# function to only execute the passed command if necessary
-# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
-# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
-#
-if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
- @set -e; \
- $(echo-cmd) \
- $(cmd_$(1)); \
- echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
- $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
- @set -e; \
- $(echo-cmd) \
- $(cmd_$(1)); \
- scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
- rm -f $(depfile); \
- mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
- @set -e; \
- $(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
-
-# $(call descend,<dir>,<target>)
-# Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make do not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-# echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-# $(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
- $(Q)set -e; \
- echo ' CHK $@'; \
- mkdir -p $(dir $@); \
- $(filechk_$(1)) $(2) > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst
index 85d6494..23fd1bd 100644
--- a/scripts/Makefile.modinst
+++ b/scripts/Makefile.modinst
@@ -5,7 +5,7 @@
.PHONY: __modinst
__modinst:
-include scripts/Makefile.lib
+include scripts/Kbuild.include
#
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 94b550e..0c4f3a9 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -36,6 +36,7 @@
_modpost: __modpost
include .config
+include scripts/Kbuild.include
include scripts/Makefile.lib
symverfile := $(objtree)/Module.symvers
diff --git a/scripts/conmakehash.c b/scripts/conmakehash.c
index 93dd23f2..e0c6891 100644
--- a/scripts/conmakehash.c
+++ b/scripts/conmakehash.c
@@ -33,7 +33,7 @@
int getunicode(char **p0)
{
- unsigned char *p = *p0;
+ char *p = *p0;
while (*p == ' ' || *p == '\t')
p++;
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index d3d2e53..9be41a9f 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -207,9 +207,9 @@
* move then they may get dropped in pass 2, which breaks the
* kallsyms rules.
*/
- if ((s->addr == _etext && strcmp(s->sym + offset, "_etext")) ||
- (s->addr == _einittext && strcmp(s->sym + offset, "_einittext")) ||
- (s->addr == _eextratext && strcmp(s->sym + offset, "_eextratext")))
+ if ((s->addr == _etext && strcmp((char*)s->sym + offset, "_etext")) ||
+ (s->addr == _einittext && strcmp((char*)s->sym + offset, "_einittext")) ||
+ (s->addr == _eextratext && strcmp((char*)s->sym + offset, "_eextratext")))
return 0;
}
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 8b84c42..c3d2578 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -59,7 +59,7 @@
void menu_end_entry(void);
void menu_add_dep(struct expr *dep);
struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep);
-void menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
+struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep);
void menu_finalize(struct menu *parent);
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 8c59b21..5cfa6c4 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -136,9 +136,9 @@
return prop;
}
-void menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep)
+struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep)
{
- menu_add_prop(type, prompt, NULL, dep);
+ return menu_add_prop(type, prompt, NULL, dep);
}
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep)
diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped
index f163d8d..ff4fcc0 100644
--- a/scripts/kconfig/zconf.tab.c_shipped
+++ b/scripts/kconfig/zconf.tab.c_shipped
@@ -1531,7 +1531,7 @@
{
menu_add_entry(NULL);
- menu_add_prop(P_MENU, yyvsp[-1].string, NULL, NULL);
+ menu_add_prompt(P_MENU, yyvsp[-1].string, NULL);
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
;}
break;
@@ -1586,7 +1586,7 @@
{
menu_add_entry(NULL);
- menu_add_prop(P_COMMENT, yyvsp[-1].string, NULL, NULL);
+ menu_add_prompt(P_COMMENT, yyvsp[-1].string, NULL);
printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
;}
break;
@@ -1640,7 +1640,7 @@
case 86:
{
- menu_add_prop(P_PROMPT, yyvsp[-1].string, NULL, yyvsp[0].expr);
+ menu_add_prompt(P_PROMPT, yyvsp[-1].string, yyvsp[0].expr);
;}
break;
@@ -1925,7 +1925,7 @@
sym_init();
menu_init();
modules_sym = sym_lookup("MODULES", 0);
- rootmenu.prompt = menu_add_prop(P_MENU, "Linux Kernel Configuration", NULL, NULL);
+ rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
//zconfdebug = 1;
zconfparse();
diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y
index 54460f8..e1a0f45 100644
--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -342,7 +342,7 @@
menu: T_MENU prompt T_EOL
{
menu_add_entry(NULL);
- menu_add_prop(P_MENU, $2, NULL, NULL);
+ menu_add_prompt(P_MENU, $2, NULL);
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
};
@@ -392,7 +392,7 @@
comment: T_COMMENT prompt T_EOL
{
menu_add_entry(NULL);
- menu_add_prop(P_COMMENT, $2, NULL, NULL);
+ menu_add_prompt(P_COMMENT, $2, NULL);
printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
};
@@ -443,7 +443,7 @@
/* empty */
| prompt if_expr
{
- menu_add_prop(P_PROMPT, $1, NULL, $2);
+ menu_add_prompt(P_PROMPT, $1, $2);
};
prompt: T_WORD
@@ -487,7 +487,7 @@
sym_init();
menu_init();
modules_sym = sym_lookup("MODULES", 0);
- rootmenu.prompt = menu_add_prop(P_MENU, "Linux Kernel Configuration", NULL, NULL);
+ rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
//zconfdebug = 1;
zconfparse();
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 0835dc2..8aaf74e6 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1665,11 +1665,17 @@
}
sub process_file($) {
- my ($file) = "$ENV{'SRCTREE'}@_";
+ my $file;
my $identifier;
my $func;
my $initial_section_counter = $section_counter;
+ if (defined($ENV{'SRCTREE'})) {
+ $file = "$ENV{'SRCTREE'}" . "/" . "@_";
+ }
+ else {
+ $file = "@_";
+ }
if (defined($source_map{$file})) {
$file = $source_map{$file};
}
diff --git a/scripts/lxdialog/dialog.h b/scripts/lxdialog/dialog.h
index c571548..eb63e1b 100644
--- a/scripts/lxdialog/dialog.h
+++ b/scripts/lxdialog/dialog.h
@@ -163,7 +163,7 @@
int dialog_checklist (const char *title, const char *prompt, int height,
int width, int list_height, int item_no,
const char * const * items, int flag);
-extern unsigned char dialog_input_result[];
+extern char dialog_input_result[];
int dialog_inputbox (const char *title, const char *prompt, int height,
int width, const char *init);
diff --git a/scripts/lxdialog/inputbox.c b/scripts/lxdialog/inputbox.c
index fa7bebc..074d2d6 100644
--- a/scripts/lxdialog/inputbox.c
+++ b/scripts/lxdialog/inputbox.c
@@ -21,7 +21,7 @@
#include "dialog.h"
-unsigned char dialog_input_result[MAX_LEN + 1];
+char dialog_input_result[MAX_LEN + 1];
/*
* Print the termination buttons
@@ -48,7 +48,7 @@
{
int i, x, y, box_y, box_x, box_width;
int input_x = 0, scroll = 0, key = 0, button = -1;
- unsigned char *instr = dialog_input_result;
+ char *instr = dialog_input_result;
WINDOW *dialog;
/* center dialog box on screen */
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 8d118d1..d7b8a38 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -1,7 +1,8 @@
TARGET=$1
ARCH=$2
SMP=$3
-CC=$4
+PREEMPT=$4
+CC=$5
# If compile.h exists already and we don't own autoconf.h
# (i.e. we're not the same user who did make *config), don't
@@ -26,8 +27,10 @@
UTS_VERSION="#$VERSION"
-if [ -n "$SMP" ] ; then UTS_VERSION="$UTS_VERSION SMP"; fi
-UTS_VERSION="$UTS_VERSION `LC_ALL=C LANG=C date`"
+CONFIG_FLAGS=""
+if [ -n "$SMP" ] ; then CONFIG_FLAGS="SMP"; fi
+if [ -n "$PREEMPT" ] ; then CONFIG_FLAGS="$CONFIG_FLAGS PREEMPT"; fi
+UTS_VERSION="$UTS_VERSION $CONFIG_FLAGS `LC_ALL=C LANG=C date`"
# Truncate to maximum length
@@ -37,7 +40,8 @@
# Generate a temporary compile.h
( echo /\* This file is auto generated, version $VERSION \*/
-
+ if [ -n "$CONFIG_FLAGS" ] ; then echo "/* $CONFIG_FLAGS */"; fi
+
echo \#define UTS_MACHINE \"$ARCH\"
echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c
index 1112347..43271a1 100644
--- a/scripts/mod/sumversion.c
+++ b/scripts/mod/sumversion.c
@@ -252,9 +252,9 @@
}
/* FIXME: Handle .s files differently (eg. # starts comments) --RR */
-static int parse_file(const signed char *fname, struct md4_ctx *md)
+static int parse_file(const char *fname, struct md4_ctx *md)
{
- signed char *file;
+ char *file;
unsigned long i, len;
file = grab_file(fname, &len);
@@ -332,7 +332,7 @@
Sum all files in the same dir or subdirs.
*/
while ((line = get_next_line(&pos, file, flen)) != NULL) {
- signed char* p = line;
+ char* p = line;
if (strncmp(line, "deps_", sizeof("deps_")-1) == 0) {
check_files = 1;
continue;
@@ -458,7 +458,7 @@
close(fd);
}
-static int strip_rcs_crap(signed char *version)
+static int strip_rcs_crap(char *version)
{
unsigned int len, full_len;
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 3b1f2ef..f3e7e8e 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -59,7 +59,7 @@
$(CONFIG_SHELL) $(MKSPEC) prebuilt > $@
binrpm-pkg: $(objtree)/binkernel.spec
- $(MAKE)
+ $(MAKE) KBUILD_SRC=
set -e; \
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
set -e; \
@@ -74,16 +74,30 @@
#
.PHONY: deb-pkg
deb-pkg:
- $(MAKE)
+ $(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
clean-dirs += $(objtree)/debian/
+# tarball targets
+# ---------------------------------------------------------------------------
+.PHONY: tar%pkg
+tar%pkg:
+ $(MAKE)
+ $(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
+
+clean-dirs += $(objtree)/tar-install/
+
+
# Help text displayed when executing 'make help'
# ---------------------------------------------------------------------------
help:
- @echo ' rpm-pkg - Build the kernel as an RPM package'
- @echo ' binrpm-pkg - Build an rpm package containing the compiled kernel & modules'
- @echo ' deb-pkg - Build the kernel as an deb package'
+ @echo ' rpm-pkg - Build the kernel as an RPM package'
+ @echo ' binrpm-pkg - Build an rpm package containing the compiled kernel'
+ @echo ' and modules'
+ @echo ' deb-pkg - Build the kernel as an deb package'
+ @echo ' tar-pkg - Build the kernel as an uncompressed tarball'
+ @echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
+ @echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index c279b63..6edb29f 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -14,18 +14,38 @@
# Some variables and settings used throughout the script
version=$KERNELRELEASE
tmpdir="$objtree/debian/tmp"
+packagename=linux-$version
+
+if [ "$ARCH" == "um" ] ; then
+ packagename=user-mode-linux-$version
+fi
# Setup the directory structure
rm -rf "$tmpdir"
mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
+if [ "$ARCH" == "um" ] ; then
+ mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
+fi
# Build and install the kernel
-cp System.map "$tmpdir/boot/System.map-$version"
-cp .config "$tmpdir/boot/config-$version"
-cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+if [ "$ARCH" == "um" ] ; then
+ $MAKE linux
+ cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
+ cp .config "$tmpdir/usr/share/doc/$packagename/config"
+ gzip "$tmpdir/usr/share/doc/$packagename/config"
+ cp $KBUILD_IMAGE "$tmpdir/usr/bin/linux-$version"
+else
+ cp System.map "$tmpdir/boot/System.map-$version"
+ cp .config "$tmpdir/boot/config-$version"
+ cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+fi
if grep -q '^CONFIG_MODULES=y' .config ; then
- INSTALL_MOD_PATH="$tmpdir" make modules_install
+ INSTALL_MOD_PATH="$tmpdir" make KBUILD_SRC= modules_install
+ if [ "$ARCH" == "um" ] ; then
+ mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/"
+ rmdir "$tmpdir/lib/modules/$version"
+ fi
fi
# Install the maintainer scripts
@@ -53,6 +73,8 @@
EOF
# Generate a control file
+if [ "$ARCH" == "um" ]; then
+
cat <<EOF > debian/control
Source: linux
Section: base
@@ -60,12 +82,34 @@
Maintainer: $name
Standards-Version: 3.6.1
-Package: linux-$version
+Package: $packagename
+Architecture: any
+Description: User Mode Linux kernel, version $version
+ User-mode Linux is a port of the Linux kernel to its own system call
+ interface. It provides a kind of virtual machine, which runs Linux
+ as a user process under another Linux kernel. This is useful for
+ kernel development, sandboxes, jails, experimentation, and
+ many other things.
+ .
+ This package contains the Linux kernel, modules and corresponding other
+ files version $version
+EOF
+
+else
+cat <<EOF > debian/control
+Source: linux
+Section: base
+Priority: optional
+Maintainer: $name
+Standards-Version: 3.6.1
+
+Package: $packagename
Architecture: any
Description: Linux kernel, version $version
This package contains the Linux kernel, modules and corresponding other
- files version $version.
+ files version $version
EOF
+fi
# Fix some ownership and permissions
chown -R root:root "$tmpdir"
diff --git a/scripts/package/buildtar b/scripts/package/buildtar
new file mode 100644
index 0000000..d8fffe6
--- /dev/null
+++ b/scripts/package/buildtar
@@ -0,0 +1,111 @@
+#!/bin/sh
+
+#
+# buildtar 0.0.3
+#
+# (C) 2004-2005 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
+#
+# This script is used to compile a tarball from the currently
+# prepared kernel. Based upon the builddeb script from
+# Wichert Akkerman <wichert@wiggy.net>.
+#
+
+set -e
+
+#
+# Some variables and settings used throughout the script
+#
+version="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}${EXTRANAME}"
+tmpdir="${objtree}/tar-install"
+tarball="${objtree}/linux-${version}.tar"
+
+
+#
+# Figure out how to compress, if requested at all
+#
+case "${1}" in
+ tar-pkg)
+ compress="cat"
+ file_ext=""
+ ;;
+ targz-pkg)
+ compress="gzip -c9"
+ file_ext=".gz"
+ ;;
+ tarbz2-pkg)
+ compress="bzip2 -c9"
+ file_ext=".bz2"
+ ;;
+ *)
+ echo "Unknown tarball target \"${1}\" requested, please add it to ${0}." >&2
+ exit 1
+ ;;
+esac
+
+
+#
+# Clean-up and re-create the temporary directory
+#
+rm -rf -- "${tmpdir}"
+mkdir -p -- "${tmpdir}/boot"
+
+
+#
+# Try to install modules
+#
+if ! make INSTALL_MOD_PATH="${tmpdir}" modules_install; then
+ echo "" >&2
+ echo "Ignoring error at module_install time, since that could be" >&2
+ echo "a result of missing local modutils/module-init-tools," >&2
+ echo "or you just didn't compile in module support at all..." >&2
+ echo "" >&2
+fi
+
+
+#
+# Install basic kernel files
+#
+cp -v -- System.map "${tmpdir}/boot/System.map-${version}"
+cp -v -- .config "${tmpdir}/boot/config-${version}"
+cp -v -- vmlinux "${tmpdir}/boot/vmlinux-${version}"
+
+
+#
+# Install arch-specific kernel image(s)
+#
+case "${ARCH}" in
+ i386)
+ [ -f arch/i386/boot/bzImage ] && cp -v -- arch/i386/boot/bzImage "${tmpdir}/boot/vmlinuz-${version}"
+ ;;
+ alpha)
+ [ -f arch/alpha/boot/vmlinux.gz ] && cp -v -- arch/alpha/boot/vmlinux.gz "${tmpdir}/boot/vmlinuz-${version}"
+ ;;
+ vax)
+ [ -f vmlinux.SYS ] && cp -v -- vmlinux.SYS "${tmpdir}/boot/vmlinux-${version}.SYS"
+ [ -f vmlinux.dsk ] && cp -v -- vmlinux.dsk "${tmpdir}/boot/vmlinux-${version}.dsk"
+ ;;
+ *)
+ [ -f "${KBUILD_IMAGE}" ] && cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinux-kbuild-${version}"
+ echo "" >&2
+ echo '** ** ** WARNING ** ** **' >&2
+ echo "" >&2
+ echo "Your architecture did not define any architecture-dependant files" >&2
+ echo "to be placed into the tarball. Please add those to ${0} ..." >&2
+ echo "" >&2
+ sleep 5
+ ;;
+esac
+
+
+#
+# Create the tarball
+#
+(
+ cd "${tmpdir}"
+ tar cf - . | ${compress} > "${tarball}${file_ext}"
+)
+
+echo "Tarball successfully created in ${tarball}${file_ext}"
+
+exit 0
+
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 6e7a58f..0b10387 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -62,10 +62,19 @@
fi
echo "%install"
+echo "%ifarch ia64"
+echo 'mkdir -p $RPM_BUILD_ROOT/boot/efi $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules'
+echo "%else"
echo 'mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules'
+echo "%endif"
echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} modules_install'
+echo "%ifarch ia64"
+echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/efi/vmlinuz-$KERNELRELEASE"
+echo 'ln -s '"efi/vmlinuz-$KERNELRELEASE" '$RPM_BUILD_ROOT'"/boot/"
+echo "%else"
echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/vmlinuz-$KERNELRELEASE"
+echo "%endif"
echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE"
diff --git a/scripts/reference_discarded.pl b/scripts/reference_discarded.pl
index d5cabb8..f04f627 100644
--- a/scripts/reference_discarded.pl
+++ b/scripts/reference_discarded.pl
@@ -96,6 +96,7 @@
$from !~ /\.debug_ranges$/ &&
$from !~ /\.debug_line$/ &&
$from !~ /\.debug_frame$/ &&
+ $from !~ /\.debug_loc$/ &&
$from !~ /\.exitcall\.exit$/ &&
$from !~ /\.eh_frame$/ &&
$from !~ /\.stab$/)) {
diff --git a/scripts/reference_init.pl b/scripts/reference_init.pl
index 9a24084..7f6960b 100644
--- a/scripts/reference_init.pl
+++ b/scripts/reference_init.pl
@@ -98,6 +98,7 @@
$from !~ /\.pdr$/ &&
$from !~ /\__param$/ &&
$from !~ /\.altinstructions/ &&
+ $from !~ /\.eh_frame/ &&
$from !~ /\.debug_/)) {
printf("Error: %s %s refers to %s\n", $object, $from, $line);
}
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
new file mode 100644
index 0000000..7c805c8
--- /dev/null
+++ b/scripts/setlocalversion
@@ -0,0 +1,56 @@
+#!/usr/bin/perl
+# Copyright 2004 - Ryan Anderson <ryan@michonline.com> GPL v2
+
+use strict;
+use warnings;
+use Digest::MD5;
+require 5.006;
+
+if (@ARGV != 1) {
+ print <<EOT;
+Usage: setlocalversion <srctree>
+EOT
+ exit(1);
+}
+
+my ($srctree) = @ARGV;
+chdir($srctree);
+
+my @LOCALVERSIONS = ();
+
+# We are going to use the following commands to try and determine if this
+# repository is at a Version boundary (i.e, 2.6.10 vs 2.6.10 + some patches) We
+# currently assume that all meaningful version boundaries are marked by a tag.
+# We don't care what the tag is, just that something exists.
+
+# Git/Cogito store the top-of-tree "commit" in .git/HEAD
+# A list of known tags sits in .git/refs/tags/
+#
+# The simple trick here is to just compare the two of these, and if we get a
+# match, return nothing, otherwise, return a subset of the SHA-1 hash in
+# .git/HEAD
+
+sub do_git_checks {
+ open(H,"<.git/HEAD") or return;
+ my $head = <H>;
+ chomp $head;
+ close(H);
+
+ opendir(D,".git/refs/tags") or return;
+ foreach my $tagfile (grep !/^\.{1,2}$/, readdir(D)) {
+ open(F,"<.git/refs/tags/" . $tagfile) or return;
+ my $tag = <F>;
+ chomp $tag;
+ close(F);
+ return if ($tag eq $head);
+ }
+ closedir(D);
+
+ push @LOCALVERSIONS, "g" . substr($head,0,8);
+}
+
+if ( -d ".git") {
+ do_git_checks();
+}
+
+printf "-%s\n", join("-",@LOCALVERSIONS) if (scalar @LOCALVERSIONS > 0);
diff --git a/usr/Kconfig b/usr/Kconfig
new file mode 100644
index 0000000..07727f3
--- /dev/null
+++ b/usr/Kconfig
@@ -0,0 +1,46 @@
+#
+# Configuration for initramfs
+#
+
+config INITRAMFS_SOURCE
+ string "Initramfs source file(s)"
+ default ""
+ help
+ This can be either a single cpio archive with a .cpio suffix or a
+ space-separated list of directories and files for building the
+ initramfs image. A cpio archive should contain a filesystem archive
+ to be used as an initramfs image. Directories should contain a
+ filesystem layout to be included in the initramfs image. Files
+ should contain entries according to the format described by the
+ "usr/gen_init_cpio" program in the kernel tree.
+
+ When multiple directories and files are specified then the
+ initramfs image will be the aggregate of all of them.
+
+ See <file:Documentation/early-userspace/README for more details.
+
+ If you are not sure, leave it blank.
+
+config INITRAMFS_ROOT_UID
+ int "User ID to map to 0 (user root)"
+ depends on INITRAMFS_SOURCE!=""
+ default "0"
+ help
+ This setting is only meaningful if the INITRAMFS_SOURCE is
+ contains a directory. Setting this user ID (UID) to something
+ other than "0" will cause all files owned by that UID to be
+ owned by user root in the initial ramdisk image.
+
+ If you are not sure, leave it set to "0".
+
+config INITRAMFS_ROOT_GID
+ int "Group ID to map to 0 (group root)"
+ depends on INITRAMFS_SOURCE!=""
+ default "0"
+ help
+ This setting is only meaningful if the INITRAMFS_SOURCE is
+ contains a directory. Setting this group ID (GID) to something
+ other than "0" will cause all files owned by that GID to be
+ owned by group root in the initial ramdisk image.
+
+ If you are not sure, leave it set to "0".
diff --git a/usr/Makefile b/usr/Makefile
index 248d555..e2129cb 100644
--- a/usr/Makefile
+++ b/usr/Makefile
@@ -27,7 +27,7 @@
filechk_initramfs_list = $(CONFIG_SHELL) \
$(srctree)/scripts/gen_initramfs_list.sh $(gen_initramfs_args) $(quotefixed_initramfs_source)
-$(obj)/initramfs_list: FORCE
+$(obj)/initramfs_list: $(obj)/Makefile FORCE
$(call filechk,initramfs_list)
quiet_cmd_cpio = CPIO $@