| /* saa711x - Philips SAA711x video decoder driver |
| * This driver can work with saa7111, saa7111a, saa7113, saa7114, |
| * saa7115 and saa7118. |
| * |
| * Based on saa7114 driver by Maxim Yevtyushkin, which is based on |
| * the saa7111 driver by Dave Perks. |
| * |
| * Copyright (C) 1998 Dave Perks <dperks@ibm.net> |
| * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com> |
| * |
| * Slight changes for video timing and attachment output by |
| * Wolfgang Scherr <scherr@net4you.net> |
| * |
| * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003) |
| * by Ronald Bultje <rbultje@ronald.bitfreak.net> |
| * |
| * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com> |
| * (2/17/2003) |
| * |
| * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl> |
| * |
| * Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org> |
| * SAA7111, SAA7113 and SAA7118 support |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| #include "saa711x_regs.h" |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/v4l2-i2c-drv-legacy.h> |
| #include <media/saa7115.h> |
| #include <asm/div64.h> |
| |
| #define VRES_60HZ (480+16) |
| |
| MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver"); |
| MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " |
| "Hans Verkuil, Mauro Carvalho Chehab"); |
| MODULE_LICENSE("GPL"); |
| |
| static int debug; |
| module_param(debug, bool, 0644); |
| |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); |
| |
| static unsigned short normal_i2c[] = { |
| 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */ |
| 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */ |
| I2C_CLIENT_END }; |
| |
| I2C_CLIENT_INSMOD; |
| |
| struct saa711x_state { |
| v4l2_std_id std; |
| int input; |
| int output; |
| int enable; |
| int radio; |
| int bright; |
| int contrast; |
| int hue; |
| int sat; |
| int width; |
| int height; |
| u32 ident; |
| u32 audclk_freq; |
| u32 crystal_freq; |
| u8 ucgc; |
| u8 cgcdiv; |
| u8 apll; |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static inline int saa711x_write(struct i2c_client *client, u8 reg, u8 value) |
| { |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| /* Sanity routine to check if a register is present */ |
| static int saa711x_has_reg(const int id, const u8 reg) |
| { |
| if (id == V4L2_IDENT_SAA7111) |
| return reg < 0x20 && reg != 0x01 && reg != 0x0f && |
| (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e; |
| |
| /* common for saa7113/4/5/8 */ |
| if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f || |
| reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) || |
| reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) || |
| reg == 0x82 || (reg >= 0x89 && reg <= 0x8e))) |
| return 0; |
| |
| switch (id) { |
| case V4L2_IDENT_SAA7113: |
| return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && |
| reg != 0x5d && reg < 0x63; |
| case V4L2_IDENT_SAA7114: |
| return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) && |
| (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 && |
| reg != 0x81 && reg < 0xf0; |
| case V4L2_IDENT_SAA7115: |
| return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe); |
| case V4L2_IDENT_SAA7118: |
| return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) && |
| (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 && |
| (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0; |
| } |
| return 1; |
| } |
| |
| static int saa711x_writeregs(struct i2c_client *client, const unsigned char *regs) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| unsigned char reg, data; |
| |
| while (*regs != 0x00) { |
| reg = *(regs++); |
| data = *(regs++); |
| |
| /* According with datasheets, reserved regs should be |
| filled with 0 - seems better not to touch on they */ |
| if (saa711x_has_reg(state->ident,reg)) { |
| if (saa711x_write(client, reg, data) < 0) |
| return -1; |
| } else { |
| v4l_dbg(1, debug, client, "tried to access reserved reg 0x%02x\n", reg); |
| } |
| } |
| return 0; |
| } |
| |
| static inline int saa711x_read(struct i2c_client *client, u8 reg) |
| { |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| /* SAA7111 initialization table */ |
| static const unsigned char saa7111_init[] = { |
| R_01_INC_DELAY, 0x00, /* reserved */ |
| |
| /*front end */ |
| R_02_INPUT_CNTL_1, 0xd0, /* FUSE=3, GUDL=2, MODE=0 */ |
| R_03_INPUT_CNTL_2, 0x23, /* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, |
| * GAFIX=0, GAI1=256, GAI2=256 */ |
| R_04_INPUT_CNTL_3, 0x00, /* GAI1=256 */ |
| R_05_INPUT_CNTL_4, 0x00, /* GAI2=256 */ |
| |
| /* decoder */ |
| R_06_H_SYNC_START, 0xf3, /* HSB at 13(50Hz) / 17(60Hz) |
| * pixels after end of last line */ |
| R_07_H_SYNC_STOP, 0xe8, /* HSS seems to be needed to |
| * work with NTSC, too */ |
| R_08_SYNC_CNTL, 0xc8, /* AUFD=1, FSEL=1, EXFIL=0, |
| * VTRC=1, HPLL=0, VNOI=0 */ |
| R_09_LUMA_CNTL, 0x01, /* BYPS=0, PREF=0, BPSS=0, |
| * VBLB=0, UPTCV=0, APER=1 */ |
| R_0A_LUMA_BRIGHT_CNTL, 0x80, |
| R_0B_LUMA_CONTRAST_CNTL, 0x47, /* 0b - CONT=1.109 */ |
| R_0C_CHROMA_SAT_CNTL, 0x40, |
| R_0D_CHROMA_HUE_CNTL, 0x00, |
| R_0E_CHROMA_CNTL_1, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, |
| * FCTC=0, CHBW=1 */ |
| R_0F_CHROMA_GAIN_CNTL, 0x00, /* reserved */ |
| R_10_CHROMA_CNTL_2, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */ |
| R_11_MODE_DELAY_CNTL, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1, |
| * OEYC=1, OEHV=1, VIPB=0, COLO=0 */ |
| R_12_RT_SIGNAL_CNTL, 0x00, /* 12 - output control 2 */ |
| R_13_RT_X_PORT_OUT_CNTL, 0x00, /* 13 - output control 3 */ |
| R_14_ANAL_ADC_COMPAT_CNTL, 0x00, |
| R_15_VGATE_START_FID_CHG, 0x00, |
| R_16_VGATE_STOP, 0x00, |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x00, |
| |
| 0x00, 0x00 |
| }; |
| |
| /* SAA7113 init codes */ |
| static const unsigned char saa7113_init[] = { |
| R_01_INC_DELAY, 0x08, |
| R_02_INPUT_CNTL_1, 0xc2, |
| R_03_INPUT_CNTL_2, 0x30, |
| R_04_INPUT_CNTL_3, 0x00, |
| R_05_INPUT_CNTL_4, 0x00, |
| R_06_H_SYNC_START, 0x89, |
| R_07_H_SYNC_STOP, 0x0d, |
| R_08_SYNC_CNTL, 0x88, |
| R_09_LUMA_CNTL, 0x01, |
| R_0A_LUMA_BRIGHT_CNTL, 0x80, |
| R_0B_LUMA_CONTRAST_CNTL, 0x47, |
| R_0C_CHROMA_SAT_CNTL, 0x40, |
| R_0D_CHROMA_HUE_CNTL, 0x00, |
| R_0E_CHROMA_CNTL_1, 0x01, |
| R_0F_CHROMA_GAIN_CNTL, 0x2a, |
| R_10_CHROMA_CNTL_2, 0x08, |
| R_11_MODE_DELAY_CNTL, 0x0c, |
| R_12_RT_SIGNAL_CNTL, 0x07, |
| R_13_RT_X_PORT_OUT_CNTL, 0x00, |
| R_14_ANAL_ADC_COMPAT_CNTL, 0x00, |
| R_15_VGATE_START_FID_CHG, 0x00, |
| R_16_VGATE_STOP, 0x00, |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x00, |
| |
| 0x00, 0x00 |
| }; |
| |
| /* If a value differs from the Hauppauge driver values, then the comment starts with |
| 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the |
| Hauppauge driver sets. */ |
| |
| /* SAA7114 and SAA7115 initialization table */ |
| static const unsigned char saa7115_init_auto_input[] = { |
| /* Front-End Part */ |
| R_01_INC_DELAY, 0x48, /* white peak control disabled */ |
| R_03_INPUT_CNTL_2, 0x20, /* was 0x30. 0x20: long vertical blanking */ |
| R_04_INPUT_CNTL_3, 0x90, /* analog gain set to 0 */ |
| R_05_INPUT_CNTL_4, 0x90, /* analog gain set to 0 */ |
| /* Decoder Part */ |
| R_06_H_SYNC_START, 0xeb, /* horiz sync begin = -21 */ |
| R_07_H_SYNC_STOP, 0xe0, /* horiz sync stop = -17 */ |
| R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */ |
| R_0A_LUMA_BRIGHT_CNTL, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ |
| R_0B_LUMA_CONTRAST_CNTL, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */ |
| R_0C_CHROMA_SAT_CNTL, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */ |
| R_0D_CHROMA_HUE_CNTL, 0x00, |
| R_0F_CHROMA_GAIN_CNTL, 0x00, /* use automatic gain */ |
| R_10_CHROMA_CNTL_2, 0x06, /* chroma: active adaptive combfilter */ |
| R_11_MODE_DELAY_CNTL, 0x00, |
| R_12_RT_SIGNAL_CNTL, 0x9d, /* RTS0 output control: VGATE */ |
| R_13_RT_X_PORT_OUT_CNTL, 0x80, /* ITU656 standard mode, RTCO output enable RTCE */ |
| R_14_ANAL_ADC_COMPAT_CNTL, 0x00, |
| R_18_RAW_DATA_GAIN_CNTL, 0x40, /* gain 0x00 = nominal */ |
| R_19_RAW_DATA_OFF_CNTL, 0x80, |
| R_1A_COLOR_KILL_LVL_CNTL, 0x77, /* recommended value */ |
| R_1B_MISC_TVVCRDET, 0x42, /* recommended value */ |
| R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */ |
| R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */ |
| |
| |
| R_80_GLOBAL_CNTL_1, 0x0, /* No tasks enabled at init */ |
| |
| /* Power Device Control */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */ |
| 0x00, 0x00 |
| }; |
| |
| /* Used to reset saa7113, saa7114 and saa7115 */ |
| static const unsigned char saa7115_cfg_reset_scaler[] = { |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* disable I-port output */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* enable I-port output */ |
| 0x00, 0x00 |
| }; |
| |
| /* ============== SAA7715 VIDEO templates ============= */ |
| |
| static const unsigned char saa7115_cfg_60hz_video[] = { |
| R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ |
| |
| R_15_VGATE_START_FID_CHG, 0x03, |
| R_16_VGATE_STOP, 0x11, |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x9c, |
| |
| R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */ |
| R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */ |
| |
| R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */ |
| |
| /* Task A */ |
| R_90_A_TASK_HANDLING_CNTL, 0x80, |
| R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, |
| R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, |
| R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, |
| |
| /* hoffset low (input), 0x0002 is minimum */ |
| R_94_A_HORIZ_INPUT_WINDOW_START, 0x01, |
| R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, |
| |
| /* hsize low (input), 0x02d0 = 720 */ |
| R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, |
| R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, |
| |
| R_98_A_VERT_INPUT_WINDOW_START, 0x05, |
| R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, |
| |
| R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c, |
| R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, |
| |
| R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, |
| R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, |
| |
| R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c, |
| R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, |
| |
| /* Task B */ |
| R_C0_B_TASK_HANDLING_CNTL, 0x00, |
| R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, |
| R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, |
| R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, |
| |
| /* 0x0002 is minimum */ |
| R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02, |
| R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, |
| |
| /* 0x02d0 = 720 */ |
| R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, |
| R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, |
| |
| /* vwindow start 0x12 = 18 */ |
| R_C8_B_VERT_INPUT_WINDOW_START, 0x12, |
| R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, |
| |
| /* vwindow length 0xf8 = 248 */ |
| R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1, |
| R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9, |
| |
| /* hwindow 0x02d0 = 720 */ |
| R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, |
| R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, |
| |
| R_F0_LFCO_PER_LINE, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */ |
| R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0 */ |
| R_F5_PULSGEN_LINE_LENGTH, 0xad, |
| R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, |
| |
| 0x00, 0x00 |
| }; |
| |
| static const unsigned char saa7115_cfg_50hz_video[] = { |
| R_80_GLOBAL_CNTL_1, 0x00, |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ |
| |
| R_15_VGATE_START_FID_CHG, 0x37, /* VGATE start */ |
| R_16_VGATE_STOP, 0x16, |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x99, |
| |
| R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */ |
| R_0E_CHROMA_CNTL_1, 0x07, |
| |
| R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */ |
| |
| /* Task A */ |
| R_90_A_TASK_HANDLING_CNTL, 0x81, |
| R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, |
| R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, |
| R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, |
| |
| /* This is weird: the datasheet says that you should use 2 as the minimum value, */ |
| /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ |
| /* hoffset low (input), 0x0002 is minimum */ |
| R_94_A_HORIZ_INPUT_WINDOW_START, 0x00, |
| R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, |
| |
| /* hsize low (input), 0x02d0 = 720 */ |
| R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, |
| R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, |
| |
| R_98_A_VERT_INPUT_WINDOW_START, 0x03, |
| R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, |
| |
| /* vsize 0x12 = 18 */ |
| R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12, |
| R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, |
| |
| /* hsize 0x05a0 = 1440 */ |
| R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, |
| R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, /* hsize hi (output) */ |
| R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12, /* vsize low (output), 0x12 = 18 */ |
| R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, /* vsize hi (output) */ |
| |
| /* Task B */ |
| R_C0_B_TASK_HANDLING_CNTL, 0x00, |
| R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, |
| R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, |
| R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, |
| |
| /* This is weird: the datasheet says that you should use 2 as the minimum value, */ |
| /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ |
| /* hoffset low (input), 0x0002 is minimum. See comment above. */ |
| R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00, |
| R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, |
| |
| /* hsize 0x02d0 = 720 */ |
| R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, |
| R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, |
| |
| /* voffset 0x16 = 22 */ |
| R_C8_B_VERT_INPUT_WINDOW_START, 0x16, |
| R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, |
| |
| /* vsize 0x0120 = 288 */ |
| R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20, |
| R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01, |
| |
| /* hsize 0x02d0 = 720 */ |
| R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, |
| R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, |
| |
| R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */ |
| R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */ |
| R_F5_PULSGEN_LINE_LENGTH, 0xb0, |
| R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, |
| |
| 0x00, 0x00 |
| }; |
| |
| /* ============== SAA7715 VIDEO templates (end) ======= */ |
| |
| static const unsigned char saa7115_cfg_vbi_on[] = { |
| R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ |
| R_80_GLOBAL_CNTL_1, 0x30, /* Activate both tasks */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ |
| |
| 0x00, 0x00 |
| }; |
| |
| static const unsigned char saa7115_cfg_vbi_off[] = { |
| R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ |
| R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ |
| |
| 0x00, 0x00 |
| }; |
| |
| |
| static const unsigned char saa7115_init_misc[] = { |
| R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01, |
| R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01, |
| R_84_I_PORT_SIGNAL_DEF, 0x20, |
| R_85_I_PORT_SIGNAL_POLAR, 0x21, |
| R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5, |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, |
| |
| /* Task A */ |
| R_A0_A_HORIZ_PRESCALING, 0x01, |
| R_A1_A_ACCUMULATION_LENGTH, 0x00, |
| R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, |
| |
| /* Configure controls at nominal value*/ |
| R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80, |
| R_A5_A_LUMA_CONTRAST_CNTL, 0x40, |
| R_A6_A_CHROMA_SATURATION_CNTL, 0x40, |
| |
| /* note: 2 x zoom ensures that VBI lines have same length as video lines. */ |
| R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00, |
| R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02, |
| |
| R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00, |
| |
| /* must be horiz lum scaling / 2 */ |
| R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00, |
| R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01, |
| |
| /* must be offset luma / 2 */ |
| R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00, |
| |
| R_B0_A_VERT_LUMA_SCALING_INC, 0x00, |
| R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04, |
| |
| R_B2_A_VERT_CHROMA_SCALING_INC, 0x00, |
| R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04, |
| |
| R_B4_A_VERT_SCALING_MODE_CNTL, 0x01, |
| |
| R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00, |
| R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00, |
| R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00, |
| R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00, |
| |
| R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00, |
| R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00, |
| R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00, |
| R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00, |
| |
| /* Task B */ |
| R_D0_B_HORIZ_PRESCALING, 0x01, |
| R_D1_B_ACCUMULATION_LENGTH, 0x00, |
| R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, |
| |
| /* Configure controls at nominal value*/ |
| R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80, |
| R_D5_B_LUMA_CONTRAST_CNTL, 0x40, |
| R_D6_B_CHROMA_SATURATION_CNTL, 0x40, |
| |
| /* hor lum scaling 0x0400 = 1 */ |
| R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00, |
| R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04, |
| |
| R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00, |
| |
| /* must be hor lum scaling / 2 */ |
| R_DC_B_HORIZ_CHROMA_SCALING, 0x00, |
| R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02, |
| |
| /* must be offset luma / 2 */ |
| R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00, |
| |
| R_E0_B_VERT_LUMA_SCALING_INC, 0x00, |
| R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04, |
| |
| R_E2_B_VERT_CHROMA_SCALING_INC, 0x00, |
| R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04, |
| |
| R_E4_B_VERT_SCALING_MODE_CNTL, 0x01, |
| |
| R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00, |
| R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00, |
| R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00, |
| R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00, |
| |
| R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00, |
| R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00, |
| R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00, |
| R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00, |
| |
| R_F2_NOMINAL_PLL2_DTO, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */ |
| R_F3_PLL_INCREMENT, 0x46, |
| R_F4_PLL2_STATUS, 0x00, |
| R_F7_PULSE_A_POS_MSB, 0x4b, /* not the recommended settings! */ |
| R_F8_PULSE_B_POS, 0x00, |
| R_F9_PULSE_B_POS_MSB, 0x4b, |
| R_FA_PULSE_C_POS, 0x00, |
| R_FB_PULSE_C_POS_MSB, 0x4b, |
| |
| /* PLL2 lock detection settings: 71 lines 50% phase error */ |
| R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88, |
| |
| /* Turn off VBI */ |
| R_40_SLICER_CNTL_1, 0x20, /* No framing code errors allowed. */ |
| R_41_LCR_BASE, 0xff, |
| R_41_LCR_BASE+1, 0xff, |
| R_41_LCR_BASE+2, 0xff, |
| R_41_LCR_BASE+3, 0xff, |
| R_41_LCR_BASE+4, 0xff, |
| R_41_LCR_BASE+5, 0xff, |
| R_41_LCR_BASE+6, 0xff, |
| R_41_LCR_BASE+7, 0xff, |
| R_41_LCR_BASE+8, 0xff, |
| R_41_LCR_BASE+9, 0xff, |
| R_41_LCR_BASE+10, 0xff, |
| R_41_LCR_BASE+11, 0xff, |
| R_41_LCR_BASE+12, 0xff, |
| R_41_LCR_BASE+13, 0xff, |
| R_41_LCR_BASE+14, 0xff, |
| R_41_LCR_BASE+15, 0xff, |
| R_41_LCR_BASE+16, 0xff, |
| R_41_LCR_BASE+17, 0xff, |
| R_41_LCR_BASE+18, 0xff, |
| R_41_LCR_BASE+19, 0xff, |
| R_41_LCR_BASE+20, 0xff, |
| R_41_LCR_BASE+21, 0xff, |
| R_41_LCR_BASE+22, 0xff, |
| R_58_PROGRAM_FRAMING_CODE, 0x40, |
| R_59_H_OFF_FOR_SLICER, 0x47, |
| R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83, |
| R_5D_DID, 0xbd, |
| R_5E_SDID, 0x35, |
| |
| R_02_INPUT_CNTL_1, 0x84, /* input tuner -> input 4, amplifier active */ |
| |
| R_80_GLOBAL_CNTL_1, 0x20, /* enable task B */ |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, |
| 0x00, 0x00 |
| }; |
| |
| static int saa711x_odd_parity(u8 c) |
| { |
| c ^= (c >> 4); |
| c ^= (c >> 2); |
| c ^= (c >> 1); |
| |
| return c & 1; |
| } |
| |
| static int saa711x_decode_vps(u8 * dst, u8 * p) |
| { |
| static const u8 biphase_tbl[] = { |
| 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, |
| 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, |
| 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, |
| 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, |
| 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, |
| 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, |
| 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, |
| 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, |
| 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, |
| 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, |
| 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, |
| 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, |
| 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, |
| 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, |
| 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, |
| 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, |
| 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, |
| 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, |
| 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, |
| 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, |
| 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, |
| 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, |
| 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, |
| 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, |
| 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, |
| 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, |
| 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, |
| 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, |
| 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, |
| 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, |
| 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, |
| 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, |
| }; |
| int i; |
| u8 c, err = 0; |
| |
| for (i = 0; i < 2 * 13; i += 2) { |
| err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; |
| c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4); |
| dst[i / 2] = c; |
| } |
| return err & 0xf0; |
| } |
| |
| static int saa711x_decode_wss(u8 * p) |
| { |
| static const int wss_bits[8] = { |
| 0, 0, 0, 1, 0, 1, 1, 1 |
| }; |
| unsigned char parity; |
| int wss = 0; |
| int i; |
| |
| for (i = 0; i < 16; i++) { |
| int b1 = wss_bits[p[i] & 7]; |
| int b2 = wss_bits[(p[i] >> 3) & 7]; |
| |
| if (b1 == b2) |
| return -1; |
| wss |= b2 << i; |
| } |
| parity = wss & 15; |
| parity ^= parity >> 2; |
| parity ^= parity >> 1; |
| |
| if (!(parity & 1)) |
| return -1; |
| |
| return wss; |
| } |
| |
| static int saa711x_set_audio_clock_freq(struct i2c_client *client, u32 freq) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| u32 acpf; |
| u32 acni; |
| u32 hz; |
| u64 f; |
| u8 acc = 0; /* reg 0x3a, audio clock control */ |
| |
| /* Checks for chips that don't have audio clock (saa7111, saa7113) */ |
| if (!saa711x_has_reg(state->ident,R_30_AUD_MAST_CLK_CYCLES_PER_FIELD)) |
| return 0; |
| |
| v4l_dbg(1, debug, client, "set audio clock freq: %d\n", freq); |
| |
| /* sanity check */ |
| if (freq < 32000 || freq > 48000) |
| return -EINVAL; |
| |
| /* hz is the refresh rate times 100 */ |
| hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000; |
| /* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */ |
| acpf = (25600 * freq) / hz; |
| /* acni = (256 * freq * 2^23) / crystal_frequency = |
| (freq * 2^(8+23)) / crystal_frequency = |
| (freq << 31) / crystal_frequency */ |
| f = freq; |
| f = f << 31; |
| do_div(f, state->crystal_freq); |
| acni = f; |
| if (state->ucgc) { |
| acpf = acpf * state->cgcdiv / 16; |
| acni = acni * state->cgcdiv / 16; |
| acc = 0x80; |
| if (state->cgcdiv == 3) |
| acc |= 0x40; |
| } |
| if (state->apll) |
| acc |= 0x08; |
| |
| saa711x_write(client, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03); |
| saa711x_write(client, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10); |
| saa711x_write(client, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc); |
| |
| saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff); |
| saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1, |
| (acpf >> 8) & 0xff); |
| saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2, |
| (acpf >> 16) & 0x03); |
| |
| saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff); |
| saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff); |
| saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f); |
| state->audclk_freq = freq; |
| return 0; |
| } |
| |
| static int saa711x_set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| if (ctrl->value < 0 || ctrl->value > 255) { |
| v4l_err(client, "invalid brightness setting %d\n", ctrl->value); |
| return -ERANGE; |
| } |
| |
| state->bright = ctrl->value; |
| saa711x_write(client, R_0A_LUMA_BRIGHT_CNTL, state->bright); |
| break; |
| |
| case V4L2_CID_CONTRAST: |
| if (ctrl->value < 0 || ctrl->value > 127) { |
| v4l_err(client, "invalid contrast setting %d\n", ctrl->value); |
| return -ERANGE; |
| } |
| |
| state->contrast = ctrl->value; |
| saa711x_write(client, R_0B_LUMA_CONTRAST_CNTL, state->contrast); |
| break; |
| |
| case V4L2_CID_SATURATION: |
| if (ctrl->value < 0 || ctrl->value > 127) { |
| v4l_err(client, "invalid saturation setting %d\n", ctrl->value); |
| return -ERANGE; |
| } |
| |
| state->sat = ctrl->value; |
| saa711x_write(client, R_0C_CHROMA_SAT_CNTL, state->sat); |
| break; |
| |
| case V4L2_CID_HUE: |
| if (ctrl->value < -127 || ctrl->value > 127) { |
| v4l_err(client, "invalid hue setting %d\n", ctrl->value); |
| return -ERANGE; |
| } |
| |
| state->hue = ctrl->value; |
| saa711x_write(client, R_0D_CHROMA_HUE_CNTL, state->hue); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int saa711x_get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| ctrl->value = state->bright; |
| break; |
| case V4L2_CID_CONTRAST: |
| ctrl->value = state->contrast; |
| break; |
| case V4L2_CID_SATURATION: |
| ctrl->value = state->sat; |
| break; |
| case V4L2_CID_HUE: |
| ctrl->value = state->hue; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int saa711x_set_size(struct i2c_client *client, int width, int height) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| int HPSC, HFSC; |
| int VSCY; |
| int res; |
| int is_50hz = state->std & V4L2_STD_625_50; |
| int Vsrc = is_50hz ? 576 : 480; |
| |
| v4l_dbg(1, debug, client, "decoder set size to %ix%i\n",width,height); |
| |
| /* FIXME need better bounds checking here */ |
| if ((width < 1) || (width > 1440)) |
| return -EINVAL; |
| if ((height < 1) || (height > Vsrc)) |
| return -EINVAL; |
| |
| if (!saa711x_has_reg(state->ident,R_D0_B_HORIZ_PRESCALING)) { |
| /* Decoder only supports 720 columns and 480 or 576 lines */ |
| if (width != 720) |
| return -EINVAL; |
| if (height != Vsrc) |
| return -EINVAL; |
| } |
| |
| state->width = width; |
| state->height = height; |
| |
| if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH)) |
| return 0; |
| |
| /* probably have a valid size, let's set it */ |
| /* Set output width/height */ |
| /* width */ |
| |
| saa711x_write(client, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, |
| (u8) (width & 0xff)); |
| saa711x_write(client, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, |
| (u8) ((width >> 8) & 0xff)); |
| |
| /* Vertical Scaling uses height/2 */ |
| res=height/2; |
| |
| /* On 60Hz, it is using a higher Vertical Output Size */ |
| if (!is_50hz) |
| res += (VRES_60HZ - 480) >> 1; |
| |
| /* height */ |
| saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, |
| (u8) (res & 0xff)); |
| saa711x_write(client, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, |
| (u8) ((res >> 8) & 0xff)); |
| |
| /* Scaling settings */ |
| /* Hprescaler is floor(inres/outres) */ |
| HPSC = (int)(720 / width); |
| /* 0 is not allowed (div. by zero) */ |
| HPSC = HPSC ? HPSC : 1; |
| HFSC = (int)((1024 * 720) / (HPSC * width)); |
| /* FIXME hardcodes to "Task B" |
| * write H prescaler integer */ |
| saa711x_write(client, R_D0_B_HORIZ_PRESCALING, |
| (u8) (HPSC & 0x3f)); |
| |
| v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); |
| /* write H fine-scaling (luminance) */ |
| saa711x_write(client, R_D8_B_HORIZ_LUMA_SCALING_INC, |
| (u8) (HFSC & 0xff)); |
| saa711x_write(client, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, |
| (u8) ((HFSC >> 8) & 0xff)); |
| /* write H fine-scaling (chrominance) |
| * must be lum/2, so i'll just bitshift :) */ |
| saa711x_write(client, R_DC_B_HORIZ_CHROMA_SCALING, |
| (u8) ((HFSC >> 1) & 0xff)); |
| saa711x_write(client, R_DD_B_HORIZ_CHROMA_SCALING_MSB, |
| (u8) ((HFSC >> 9) & 0xff)); |
| |
| VSCY = (int)((1024 * Vsrc) / height); |
| v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); |
| |
| /* Correct Contrast and Luminance */ |
| saa711x_write(client, R_D5_B_LUMA_CONTRAST_CNTL, |
| (u8) (64 * 1024 / VSCY)); |
| saa711x_write(client, R_D6_B_CHROMA_SATURATION_CNTL, |
| (u8) (64 * 1024 / VSCY)); |
| |
| /* write V fine-scaling (luminance) */ |
| saa711x_write(client, R_E0_B_VERT_LUMA_SCALING_INC, |
| (u8) (VSCY & 0xff)); |
| saa711x_write(client, R_E1_B_VERT_LUMA_SCALING_INC_MSB, |
| (u8) ((VSCY >> 8) & 0xff)); |
| /* write V fine-scaling (chrominance) */ |
| saa711x_write(client, R_E2_B_VERT_CHROMA_SCALING_INC, |
| (u8) (VSCY & 0xff)); |
| saa711x_write(client, R_E3_B_VERT_CHROMA_SCALING_INC_MSB, |
| (u8) ((VSCY >> 8) & 0xff)); |
| |
| saa711x_writeregs(client, saa7115_cfg_reset_scaler); |
| |
| /* Activates task "B" */ |
| saa711x_write(client, R_80_GLOBAL_CNTL_1, |
| saa711x_read(client,R_80_GLOBAL_CNTL_1) | 0x20); |
| |
| return 0; |
| } |
| |
| static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| |
| /* Prevent unnecessary standard changes. During a standard |
| change the I-Port is temporarily disabled. Any devices |
| reading from that port can get confused. |
| Note that VIDIOC_S_STD is also used to switch from |
| radio to TV mode, so if a VIDIOC_S_STD is broadcast to |
| all I2C devices then you do not want to have an unwanted |
| side-effect here. */ |
| if (std == state->std) |
| return; |
| |
| state->std = std; |
| |
| // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. |
| if (std & V4L2_STD_525_60) { |
| v4l_dbg(1, debug, client, "decoder set standard 60 Hz\n"); |
| saa711x_writeregs(client, saa7115_cfg_60hz_video); |
| saa711x_set_size(client, 720, 480); |
| } else { |
| v4l_dbg(1, debug, client, "decoder set standard 50 Hz\n"); |
| saa711x_writeregs(client, saa7115_cfg_50hz_video); |
| saa711x_set_size(client, 720, 576); |
| } |
| |
| /* Register 0E - Bits D6-D4 on NO-AUTO mode |
| (SAA7111 and SAA7113 doesn't have auto mode) |
| 50 Hz / 625 lines 60 Hz / 525 lines |
| 000 PAL BGDHI (4.43Mhz) NTSC M (3.58MHz) |
| 001 NTSC 4.43 (50 Hz) PAL 4.43 (60 Hz) |
| 010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz) |
| 011 NTSC N (3.58MHz) PAL M (3.58MHz) |
| 100 reserved NTSC-Japan (3.58MHz) |
| */ |
| if (state->ident == V4L2_IDENT_SAA7111 || |
| state->ident == V4L2_IDENT_SAA7113) { |
| u8 reg = saa711x_read(client, R_0E_CHROMA_CNTL_1) & 0x8f; |
| |
| if (std == V4L2_STD_PAL_M) { |
| reg |= 0x30; |
| } else if (std == V4L2_STD_PAL_Nc) { |
| reg |= 0x20; |
| } else if (std == V4L2_STD_PAL_60) { |
| reg |= 0x10; |
| } else if (std == V4L2_STD_NTSC_M_JP) { |
| reg |= 0x40; |
| } else if (std & V4L2_STD_SECAM) { |
| reg |= 0x50; |
| } |
| saa711x_write(client, R_0E_CHROMA_CNTL_1, reg); |
| } else { |
| /* restart task B if needed */ |
| int taskb = saa711x_read(client, R_80_GLOBAL_CNTL_1) & 0x10; |
| |
| if (taskb && state->ident == V4L2_IDENT_SAA7114) { |
| saa711x_writeregs(client, saa7115_cfg_vbi_on); |
| } |
| |
| /* switch audio mode too! */ |
| saa711x_set_audio_clock_freq(client, state->audclk_freq); |
| } |
| } |
| |
| static v4l2_std_id saa711x_get_v4lstd(struct i2c_client *client) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| |
| return state->std; |
| } |
| |
| static void saa711x_log_status(struct i2c_client *client) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| int reg1e, reg1f; |
| int signalOk; |
| int vcr; |
| |
| v4l_info(client, "Audio frequency: %d Hz\n", state->audclk_freq); |
| if (state->ident != V4L2_IDENT_SAA7115) { |
| /* status for the saa7114 */ |
| reg1f = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC); |
| signalOk = (reg1f & 0xc1) == 0x81; |
| v4l_info(client, "Video signal: %s\n", signalOk ? "ok" : "bad"); |
| v4l_info(client, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); |
| return; |
| } |
| |
| /* status for the saa7115 */ |
| reg1e = saa711x_read(client, R_1E_STATUS_BYTE_1_VD_DEC); |
| reg1f = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC); |
| |
| signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80; |
| vcr = !(reg1f & 0x10); |
| |
| if (state->input >= 6) { |
| v4l_info(client, "Input: S-Video %d\n", state->input - 6); |
| } else { |
| v4l_info(client, "Input: Composite %d\n", state->input); |
| } |
| v4l_info(client, "Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad"); |
| v4l_info(client, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); |
| |
| switch (reg1e & 0x03) { |
| case 1: |
| v4l_info(client, "Detected format: NTSC\n"); |
| break; |
| case 2: |
| v4l_info(client, "Detected format: PAL\n"); |
| break; |
| case 3: |
| v4l_info(client, "Detected format: SECAM\n"); |
| break; |
| default: |
| v4l_info(client, "Detected format: BW/No color\n"); |
| break; |
| } |
| v4l_info(client, "Width, Height: %d, %d\n", state->width, state->height); |
| } |
| |
| /* setup the sliced VBI lcr registers according to the sliced VBI format */ |
| static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_format *fmt) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| int is_50hz = (state->std & V4L2_STD_625_50); |
| u8 lcr[24]; |
| int i, x; |
| |
| #if 1 |
| /* saa7113/7114/7118 VBI support are experimental */ |
| if (!saa711x_has_reg(state->ident,R_41_LCR_BASE)) |
| return; |
| |
| #else |
| /* SAA7113 and SAA7118 also should support VBI - Need testing */ |
| if (state->ident != V4L2_IDENT_SAA7115) |
| return; |
| #endif |
| |
| for (i = 0; i <= 23; i++) |
| lcr[i] = 0xff; |
| |
| if (fmt->service_set == 0) { |
| /* raw VBI */ |
| if (is_50hz) |
| for (i = 6; i <= 23; i++) |
| lcr[i] = 0xdd; |
| else |
| for (i = 10; i <= 21; i++) |
| lcr[i] = 0xdd; |
| } else { |
| /* sliced VBI */ |
| /* first clear lines that cannot be captured */ |
| if (is_50hz) { |
| for (i = 0; i <= 5; i++) |
| fmt->service_lines[0][i] = |
| fmt->service_lines[1][i] = 0; |
| } |
| else { |
| for (i = 0; i <= 9; i++) |
| fmt->service_lines[0][i] = |
| fmt->service_lines[1][i] = 0; |
| for (i = 22; i <= 23; i++) |
| fmt->service_lines[0][i] = |
| fmt->service_lines[1][i] = 0; |
| } |
| |
| /* Now set the lcr values according to the specified service */ |
| for (i = 6; i <= 23; i++) { |
| lcr[i] = 0; |
| for (x = 0; x <= 1; x++) { |
| switch (fmt->service_lines[1-x][i]) { |
| case 0: |
| lcr[i] |= 0xf << (4 * x); |
| break; |
| case V4L2_SLICED_TELETEXT_B: |
| lcr[i] |= 1 << (4 * x); |
| break; |
| case V4L2_SLICED_CAPTION_525: |
| lcr[i] |= 4 << (4 * x); |
| break; |
| case V4L2_SLICED_WSS_625: |
| lcr[i] |= 5 << (4 * x); |
| break; |
| case V4L2_SLICED_VPS: |
| lcr[i] |= 7 << (4 * x); |
| break; |
| } |
| } |
| } |
| } |
| |
| /* write the lcr registers */ |
| for (i = 2; i <= 23; i++) { |
| saa711x_write(client, i - 2 + R_41_LCR_BASE, lcr[i]); |
| } |
| |
| /* enable/disable raw VBI capturing */ |
| saa711x_writeregs(client, fmt->service_set == 0 ? |
| saa7115_cfg_vbi_on : |
| saa7115_cfg_vbi_off); |
| } |
| |
| static int saa711x_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) |
| { |
| static u16 lcr2vbi[] = { |
| 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ |
| 0, V4L2_SLICED_CAPTION_525, /* 4 */ |
| V4L2_SLICED_WSS_625, 0, /* 5 */ |
| V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */ |
| 0, 0, 0, 0 |
| }; |
| struct v4l2_sliced_vbi_format *sliced = &fmt->fmt.sliced; |
| int i; |
| |
| if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) |
| return -EINVAL; |
| memset(sliced, 0, sizeof(*sliced)); |
| /* done if using raw VBI */ |
| if (saa711x_read(client, R_80_GLOBAL_CNTL_1) & 0x10) |
| return 0; |
| for (i = 2; i <= 23; i++) { |
| u8 v = saa711x_read(client, i - 2 + R_41_LCR_BASE); |
| |
| sliced->service_lines[0][i] = lcr2vbi[v >> 4]; |
| sliced->service_lines[1][i] = lcr2vbi[v & 0xf]; |
| sliced->service_set |= |
| sliced->service_lines[0][i] | sliced->service_lines[1][i]; |
| } |
| return 0; |
| } |
| |
| static int saa711x_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) |
| { |
| if (fmt->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { |
| saa711x_set_lcr(client, &fmt->fmt.sliced); |
| return 0; |
| } |
| if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| return saa711x_set_size(client,fmt->fmt.pix.width,fmt->fmt.pix.height); |
| } |
| |
| /* Decode the sliced VBI data stream as created by the saa7115. |
| The format is described in the saa7115 datasheet in Tables 25 and 26 |
| and in Figure 33. |
| The current implementation uses SAV/EAV codes and not the ancillary data |
| headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV |
| code. */ |
| static void saa711x_decode_vbi_line(struct i2c_client *client, |
| struct v4l2_decode_vbi_line *vbi) |
| { |
| static const char vbi_no_data_pattern[] = { |
| 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0 |
| }; |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| u8 *p = vbi->p; |
| u32 wss; |
| int id1, id2; /* the ID1 and ID2 bytes from the internal header */ |
| |
| vbi->type = 0; /* mark result as a failure */ |
| id1 = p[2]; |
| id2 = p[3]; |
| /* Note: the field bit is inverted for 60 Hz video */ |
| if (state->std & V4L2_STD_525_60) |
| id1 ^= 0x40; |
| |
| /* Skip internal header, p now points to the start of the payload */ |
| p += 4; |
| vbi->p = p; |
| |
| /* calculate field and line number of the VBI packet (1-23) */ |
| vbi->is_second_field = ((id1 & 0x40) != 0); |
| vbi->line = (id1 & 0x3f) << 3; |
| vbi->line |= (id2 & 0x70) >> 4; |
| |
| /* Obtain data type */ |
| id2 &= 0xf; |
| |
| /* If the VBI slicer does not detect any signal it will fill up |
| the payload buffer with 0xa0 bytes. */ |
| if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern))) |
| return; |
| |
| /* decode payloads */ |
| switch (id2) { |
| case 1: |
| vbi->type = V4L2_SLICED_TELETEXT_B; |
| break; |
| case 4: |
| if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1])) |
| return; |
| vbi->type = V4L2_SLICED_CAPTION_525; |
| break; |
| case 5: |
| wss = saa711x_decode_wss(p); |
| if (wss == -1) |
| return; |
| p[0] = wss & 0xff; |
| p[1] = wss >> 8; |
| vbi->type = V4L2_SLICED_WSS_625; |
| break; |
| case 7: |
| if (saa711x_decode_vps(p, p) != 0) |
| return; |
| vbi->type = V4L2_SLICED_VPS; |
| break; |
| default: |
| return; |
| } |
| } |
| |
| /* ============ SAA7115 AUDIO settings (end) ============= */ |
| |
| static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *arg) |
| { |
| struct saa711x_state *state = i2c_get_clientdata(client); |
| |
| /* ioctls to allow direct access to the saa7115 registers for testing */ |
| switch (cmd) { |
| case VIDIOC_S_FMT: |
| return saa711x_set_v4lfmt(client, (struct v4l2_format *)arg); |
| |
| case VIDIOC_G_FMT: |
| return saa711x_get_v4lfmt(client, (struct v4l2_format *)arg); |
| |
| case VIDIOC_INT_AUDIO_CLOCK_FREQ: |
| return saa711x_set_audio_clock_freq(client, *(u32 *)arg); |
| |
| case VIDIOC_G_TUNER: |
| { |
| struct v4l2_tuner *vt = arg; |
| int status; |
| |
| if (state->radio) |
| break; |
| status = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC); |
| |
| v4l_dbg(1, debug, client, "status: 0x%02x\n", status); |
| vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0; |
| break; |
| } |
| |
| case VIDIOC_LOG_STATUS: |
| saa711x_log_status(client); |
| break; |
| |
| case VIDIOC_G_CTRL: |
| return saa711x_get_v4lctrl(client, (struct v4l2_control *)arg); |
| |
| case VIDIOC_S_CTRL: |
| return saa711x_set_v4lctrl(client, (struct v4l2_control *)arg); |
| |
| case VIDIOC_QUERYCTRL: |
| { |
| struct v4l2_queryctrl *qc = arg; |
| |
| switch (qc->id) { |
| case V4L2_CID_BRIGHTNESS: |
| case V4L2_CID_CONTRAST: |
| case V4L2_CID_SATURATION: |
| case V4L2_CID_HUE: |
| return v4l2_ctrl_query_fill_std(qc); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| case VIDIOC_G_STD: |
| *(v4l2_std_id *)arg = saa711x_get_v4lstd(client); |
| break; |
| |
| case VIDIOC_S_STD: |
| state->radio = 0; |
| saa711x_set_v4lstd(client, *(v4l2_std_id *)arg); |
| break; |
| |
| case AUDC_SET_RADIO: |
| state->radio = 1; |
| break; |
| |
| case VIDIOC_INT_G_VIDEO_ROUTING: |
| { |
| struct v4l2_routing *route = arg; |
| |
| route->input = state->input; |
| route->output = state->output; |
| break; |
| } |
| |
| case VIDIOC_INT_S_VIDEO_ROUTING: |
| { |
| struct v4l2_routing *route = arg; |
| u32 input = route->input; |
| u8 mask = (state->ident == V4L2_IDENT_SAA7111) ? 0xf8 : 0xf0; |
| |
| v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output); |
| /* saa7111/3 does not have these inputs */ |
| if ((state->ident == V4L2_IDENT_SAA7113 || |
| state->ident == V4L2_IDENT_SAA7111) && |
| (route->input == SAA7115_COMPOSITE4 || |
| route->input == SAA7115_COMPOSITE5)) { |
| return -EINVAL; |
| } |
| if (route->input > SAA7115_SVIDEO3) |
| return -EINVAL; |
| if (route->output > SAA7115_IPORT_ON) |
| return -EINVAL; |
| if (state->input == route->input && state->output == route->output) |
| break; |
| v4l_dbg(1, debug, client, "now setting %s input %s output\n", |
| (route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); |
| state->input = route->input; |
| |
| /* saa7111 has slightly different input numbering */ |
| if (state->ident == V4L2_IDENT_SAA7111) { |
| if (input >= SAA7115_COMPOSITE4) |
| input -= 2; |
| /* saa7111 specific */ |
| saa711x_write(client, R_10_CHROMA_CNTL_2, |
| (saa711x_read(client, R_10_CHROMA_CNTL_2) & 0x3f) | |
| ((route->output & 0xc0) ^ 0x40)); |
| saa711x_write(client, R_13_RT_X_PORT_OUT_CNTL, |
| (saa711x_read(client, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | |
| ((route->output & 2) ? 0x0a : 0)); |
| } |
| |
| /* select mode */ |
| saa711x_write(client, R_02_INPUT_CNTL_1, |
| (saa711x_read(client, R_02_INPUT_CNTL_1) & mask) | |
| input); |
| |
| /* bypass chrominance trap for S-Video modes */ |
| saa711x_write(client, R_09_LUMA_CNTL, |
| (saa711x_read(client, R_09_LUMA_CNTL) & 0x7f) | |
| (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0)); |
| |
| state->output = route->output; |
| if (state->ident == V4L2_IDENT_SAA7114 || |
| state->ident == V4L2_IDENT_SAA7115) { |
| saa711x_write(client, R_83_X_PORT_I_O_ENA_AND_OUT_CLK, |
| (saa711x_read(client, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) | |
| (state->output & 0x01)); |
| } |
| break; |
| } |
| |
| case VIDIOC_STREAMON: |
| case VIDIOC_STREAMOFF: |
| v4l_dbg(1, debug, client, "%s output\n", |
| (cmd == VIDIOC_STREAMON) ? "enable" : "disable"); |
| |
| if (state->enable != (cmd == VIDIOC_STREAMON)) { |
| state->enable = (cmd == VIDIOC_STREAMON); |
| saa711x_write(client, |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, |
| state->enable); |
| } |
| break; |
| |
| case VIDIOC_INT_S_CRYSTAL_FREQ: |
| { |
| struct v4l2_crystal_freq *freq = arg; |
| |
| if (freq->freq != SAA7115_FREQ_32_11_MHZ && |
| freq->freq != SAA7115_FREQ_24_576_MHZ) |
| return -EINVAL; |
| state->crystal_freq = freq->freq; |
| state->cgcdiv = (freq->flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4; |
| state->ucgc = (freq->flags & SAA7115_FREQ_FL_UCGC) ? 1 : 0; |
| state->apll = (freq->flags & SAA7115_FREQ_FL_APLL) ? 1 : 0; |
| saa711x_set_audio_clock_freq(client, state->audclk_freq); |
| break; |
| } |
| |
| case VIDIOC_INT_DECODE_VBI_LINE: |
| saa711x_decode_vbi_line(client, arg); |
| break; |
| |
| case VIDIOC_INT_RESET: |
| v4l_dbg(1, debug, client, "decoder RESET\n"); |
| saa711x_writeregs(client, saa7115_cfg_reset_scaler); |
| break; |
| |
| case VIDIOC_INT_S_GPIO: |
| if (state->ident != V4L2_IDENT_SAA7111) |
| return -EINVAL; |
| saa711x_write(client, 0x11, (saa711x_read(client, 0x11) & 0x7f) | |
| (*(u32 *)arg ? 0x80 : 0)); |
| break; |
| |
| case VIDIOC_INT_G_VBI_DATA: |
| { |
| struct v4l2_sliced_vbi_data *data = arg; |
| |
| /* Note: the internal field ID is inverted for NTSC, |
| so data->field 0 maps to the saa7115 even field, |
| whereas for PAL it maps to the saa7115 odd field. */ |
| switch (data->id) { |
| case V4L2_SLICED_WSS_625: |
| if (saa711x_read(client, 0x6b) & 0xc0) |
| return -EIO; |
| data->data[0] = saa711x_read(client, 0x6c); |
| data->data[1] = saa711x_read(client, 0x6d); |
| return 0; |
| case V4L2_SLICED_CAPTION_525: |
| if (data->field == 0) { |
| /* CC */ |
| if (saa711x_read(client, 0x66) & 0x30) |
| return -EIO; |
| data->data[0] = saa711x_read(client, 0x69); |
| data->data[1] = saa711x_read(client, 0x6a); |
| return 0; |
| } |
| /* XDS */ |
| if (saa711x_read(client, 0x66) & 0xc0) |
| return -EIO; |
| data->data[0] = saa711x_read(client, 0x67); |
| data->data[1] = saa711x_read(client, 0x68); |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| break; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| case VIDIOC_DBG_G_REGISTER: |
| case VIDIOC_DBG_S_REGISTER: |
| { |
| struct v4l2_register *reg = arg; |
| |
| if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip)) |
| return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (cmd == VIDIOC_DBG_G_REGISTER) |
| reg->val = saa711x_read(client, reg->reg & 0xff); |
| else |
| saa711x_write(client, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| } |
| #endif |
| |
| case VIDIOC_G_CHIP_IDENT: |
| return v4l2_chip_ident_i2c_client(client, arg, state->ident, 0); |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int saa7115_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct saa711x_state *state; |
| int i; |
| char name[17]; |
| char chip_id; |
| int autodetect = !id || id->driver_data == 1; |
| |
| /* Check if the adapter supports the needed features */ |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -EIO; |
| |
| for (i = 0; i < 0x0f; i++) { |
| saa711x_write(client, 0, i); |
| name[i] = (saa711x_read(client, 0) & 0x0f) + '0'; |
| if (name[i] > '9') |
| name[i] += 'a' - '9' - 1; |
| } |
| name[i] = '\0'; |
| |
| chip_id = name[5]; |
| |
| /* Check whether this chip is part of the saa711x series */ |
| if (memcmp(name, "1f711", 5)) { |
| v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n", |
| client->addr << 1, name); |
| return -ENODEV; |
| } |
| |
| /* Safety check */ |
| if (!autodetect && id->name[6] != chip_id) { |
| v4l_warn(client, "found saa711%c while %s was expected\n", |
| chip_id, id->name); |
| } |
| snprintf(client->name, sizeof(client->name), "saa711%c", chip_id); |
| v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name, |
| client->addr << 1, client->adapter->name); |
| |
| state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL); |
| if (state == NULL) |
| return -ENOMEM; |
| i2c_set_clientdata(client, state); |
| state->input = -1; |
| state->output = SAA7115_IPORT_ON; |
| state->enable = 1; |
| state->radio = 0; |
| state->bright = 128; |
| state->contrast = 64; |
| state->hue = 0; |
| state->sat = 64; |
| switch (chip_id) { |
| case '1': |
| state->ident = V4L2_IDENT_SAA7111; |
| break; |
| case '3': |
| state->ident = V4L2_IDENT_SAA7113; |
| break; |
| case '4': |
| state->ident = V4L2_IDENT_SAA7114; |
| break; |
| case '5': |
| state->ident = V4L2_IDENT_SAA7115; |
| break; |
| case '8': |
| state->ident = V4L2_IDENT_SAA7118; |
| break; |
| default: |
| state->ident = V4L2_IDENT_SAA7111; |
| v4l_info(client, "WARNING: Chip is not known - Falling back to saa7111\n"); |
| |
| } |
| |
| state->audclk_freq = 48000; |
| |
| v4l_dbg(1, debug, client, "writing init values\n"); |
| |
| /* init to 60hz/48khz */ |
| state->crystal_freq = SAA7115_FREQ_24_576_MHZ; |
| switch (state->ident) { |
| case V4L2_IDENT_SAA7111: |
| saa711x_writeregs(client, saa7111_init); |
| break; |
| case V4L2_IDENT_SAA7113: |
| saa711x_writeregs(client, saa7113_init); |
| break; |
| default: |
| state->crystal_freq = SAA7115_FREQ_32_11_MHZ; |
| saa711x_writeregs(client, saa7115_init_auto_input); |
| } |
| if (state->ident != V4L2_IDENT_SAA7111) |
| saa711x_writeregs(client, saa7115_init_misc); |
| saa711x_set_v4lstd(client, V4L2_STD_NTSC); |
| |
| v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n", |
| saa711x_read(client, R_1E_STATUS_BYTE_1_VD_DEC), saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC)); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int saa7115_remove(struct i2c_client *client) |
| { |
| kfree(i2c_get_clientdata(client)); |
| return 0; |
| } |
| |
| static const struct i2c_device_id saa7115_id[] = { |
| { "saa7115_auto", 1 }, /* autodetect */ |
| { "saa7111", 0 }, |
| { "saa7113", 0 }, |
| { "saa7114", 0 }, |
| { "saa7115", 0 }, |
| { "saa7118", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, saa7115_id); |
| |
| static struct v4l2_i2c_driver_data v4l2_i2c_data = { |
| .name = "saa7115", |
| .driverid = I2C_DRIVERID_SAA711X, |
| .command = saa7115_command, |
| .probe = saa7115_probe, |
| .remove = saa7115_remove, |
| .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL, |
| .id_table = saa7115_id, |
| }; |