| /* |
| * Copyright (c) 2003-2015 Broadcom Corporation |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/completion.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #define XLP9XX_I2C_DIV 0x0 |
| #define XLP9XX_I2C_CTRL 0x1 |
| #define XLP9XX_I2C_CMD 0x2 |
| #define XLP9XX_I2C_STATUS 0x3 |
| #define XLP9XX_I2C_MTXFIFO 0x4 |
| #define XLP9XX_I2C_MRXFIFO 0x5 |
| #define XLP9XX_I2C_MFIFOCTRL 0x6 |
| #define XLP9XX_I2C_STXFIFO 0x7 |
| #define XLP9XX_I2C_SRXFIFO 0x8 |
| #define XLP9XX_I2C_SFIFOCTRL 0x9 |
| #define XLP9XX_I2C_SLAVEADDR 0xA |
| #define XLP9XX_I2C_OWNADDR 0xB |
| #define XLP9XX_I2C_FIFOWCNT 0xC |
| #define XLP9XX_I2C_INTEN 0xD |
| #define XLP9XX_I2C_INTST 0xE |
| #define XLP9XX_I2C_WAITCNT 0xF |
| #define XLP9XX_I2C_TIMEOUT 0X10 |
| #define XLP9XX_I2C_GENCALLADDR 0x11 |
| |
| #define XLP9XX_I2C_CMD_START BIT(7) |
| #define XLP9XX_I2C_CMD_STOP BIT(6) |
| #define XLP9XX_I2C_CMD_READ BIT(5) |
| #define XLP9XX_I2C_CMD_WRITE BIT(4) |
| #define XLP9XX_I2C_CMD_ACK BIT(3) |
| |
| #define XLP9XX_I2C_CTRL_MCTLEN_SHIFT 16 |
| #define XLP9XX_I2C_CTRL_MCTLEN_MASK 0xffff0000 |
| #define XLP9XX_I2C_CTRL_RST BIT(8) |
| #define XLP9XX_I2C_CTRL_EN BIT(6) |
| #define XLP9XX_I2C_CTRL_MASTER BIT(4) |
| #define XLP9XX_I2C_CTRL_FIFORD BIT(1) |
| #define XLP9XX_I2C_CTRL_ADDMODE BIT(0) |
| |
| #define XLP9XX_I2C_INTEN_NACKADDR BIT(25) |
| #define XLP9XX_I2C_INTEN_SADDR BIT(13) |
| #define XLP9XX_I2C_INTEN_DATADONE BIT(12) |
| #define XLP9XX_I2C_INTEN_ARLOST BIT(11) |
| #define XLP9XX_I2C_INTEN_MFIFOFULL BIT(4) |
| #define XLP9XX_I2C_INTEN_MFIFOEMTY BIT(3) |
| #define XLP9XX_I2C_INTEN_MFIFOHI BIT(2) |
| #define XLP9XX_I2C_INTEN_BUSERR BIT(0) |
| |
| #define XLP9XX_I2C_MFIFOCTRL_HITH_SHIFT 8 |
| #define XLP9XX_I2C_MFIFOCTRL_LOTH_SHIFT 0 |
| #define XLP9XX_I2C_MFIFOCTRL_RST BIT(16) |
| |
| #define XLP9XX_I2C_SLAVEADDR_RW BIT(0) |
| #define XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT 1 |
| |
| #define XLP9XX_I2C_IP_CLK_FREQ 133000000UL |
| #define XLP9XX_I2C_DEFAULT_FREQ 100000 |
| #define XLP9XX_I2C_HIGH_FREQ 400000 |
| #define XLP9XX_I2C_FIFO_SIZE 0x80U |
| #define XLP9XX_I2C_TIMEOUT_MS 1000 |
| |
| #define XLP9XX_I2C_FIFO_WCNT_MASK 0xff |
| #define XLP9XX_I2C_STATUS_ERRMASK (XLP9XX_I2C_INTEN_ARLOST | \ |
| XLP9XX_I2C_INTEN_NACKADDR | XLP9XX_I2C_INTEN_BUSERR) |
| |
| struct xlp9xx_i2c_dev { |
| struct device *dev; |
| struct i2c_adapter adapter; |
| struct completion msg_complete; |
| int irq; |
| bool msg_read; |
| u32 __iomem *base; |
| u32 msg_buf_remaining; |
| u32 msg_len; |
| u32 clk_hz; |
| u32 msg_err; |
| u8 *msg_buf; |
| }; |
| |
| static inline void xlp9xx_write_i2c_reg(struct xlp9xx_i2c_dev *priv, |
| unsigned long reg, u32 val) |
| { |
| writel(val, priv->base + reg); |
| } |
| |
| static inline u32 xlp9xx_read_i2c_reg(struct xlp9xx_i2c_dev *priv, |
| unsigned long reg) |
| { |
| return readl(priv->base + reg); |
| } |
| |
| static void xlp9xx_i2c_mask_irq(struct xlp9xx_i2c_dev *priv, u32 mask) |
| { |
| u32 inten; |
| |
| inten = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTEN) & ~mask; |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, inten); |
| } |
| |
| static void xlp9xx_i2c_unmask_irq(struct xlp9xx_i2c_dev *priv, u32 mask) |
| { |
| u32 inten; |
| |
| inten = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTEN) | mask; |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, inten); |
| } |
| |
| static void xlp9xx_i2c_update_rx_fifo_thres(struct xlp9xx_i2c_dev *priv) |
| { |
| u32 thres; |
| |
| thres = min(priv->msg_buf_remaining, XLP9XX_I2C_FIFO_SIZE); |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MFIFOCTRL, |
| thres << XLP9XX_I2C_MFIFOCTRL_HITH_SHIFT); |
| } |
| |
| static void xlp9xx_i2c_fill_tx_fifo(struct xlp9xx_i2c_dev *priv) |
| { |
| u32 len, i; |
| u8 *buf = priv->msg_buf; |
| |
| len = min(priv->msg_buf_remaining, XLP9XX_I2C_FIFO_SIZE); |
| for (i = 0; i < len; i++) |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MTXFIFO, buf[i]); |
| priv->msg_buf_remaining -= len; |
| priv->msg_buf += len; |
| } |
| |
| static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv) |
| { |
| u32 len, i; |
| u8 *buf = priv->msg_buf; |
| |
| len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) & |
| XLP9XX_I2C_FIFO_WCNT_MASK; |
| len = min(priv->msg_buf_remaining, len); |
| for (i = 0; i < len; i++, buf++) |
| *buf = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO); |
| |
| priv->msg_buf_remaining -= len; |
| priv->msg_buf = buf; |
| |
| if (priv->msg_buf_remaining) |
| xlp9xx_i2c_update_rx_fifo_thres(priv); |
| } |
| |
| static irqreturn_t xlp9xx_i2c_isr(int irq, void *dev_id) |
| { |
| struct xlp9xx_i2c_dev *priv = dev_id; |
| u32 status; |
| |
| status = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTST); |
| if (status == 0) |
| return IRQ_NONE; |
| |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTST, status); |
| if (status & XLP9XX_I2C_STATUS_ERRMASK) { |
| priv->msg_err = status; |
| goto xfer_done; |
| } |
| |
| /* SADDR ACK for SMBUS_QUICK */ |
| if ((status & XLP9XX_I2C_INTEN_SADDR) && (priv->msg_len == 0)) |
| goto xfer_done; |
| |
| if (!priv->msg_read) { |
| if (status & XLP9XX_I2C_INTEN_MFIFOEMTY) { |
| /* TX FIFO got empty, fill it up again */ |
| if (priv->msg_buf_remaining) |
| xlp9xx_i2c_fill_tx_fifo(priv); |
| else |
| xlp9xx_i2c_mask_irq(priv, |
| XLP9XX_I2C_INTEN_MFIFOEMTY); |
| } |
| } else { |
| if (status & (XLP9XX_I2C_INTEN_DATADONE | |
| XLP9XX_I2C_INTEN_MFIFOHI)) { |
| /* data is in FIFO, read it */ |
| if (priv->msg_buf_remaining) |
| xlp9xx_i2c_drain_rx_fifo(priv); |
| } |
| } |
| |
| /* Transfer complete */ |
| if (status & XLP9XX_I2C_INTEN_DATADONE) |
| goto xfer_done; |
| |
| return IRQ_HANDLED; |
| |
| xfer_done: |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0); |
| complete(&priv->msg_complete); |
| return IRQ_HANDLED; |
| } |
| |
| static int xlp9xx_i2c_init(struct xlp9xx_i2c_dev *priv) |
| { |
| u32 prescale; |
| |
| /* |
| * The controller uses 5 * SCL clock internally. |
| * So prescale value should be divided by 5. |
| */ |
| prescale = DIV_ROUND_UP(XLP9XX_I2C_IP_CLK_FREQ, priv->clk_hz); |
| prescale = ((prescale - 8) / 5) - 1; |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_RST); |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_EN | |
| XLP9XX_I2C_CTRL_MASTER); |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_DIV, prescale); |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0); |
| |
| return 0; |
| } |
| |
| static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg, |
| int last_msg) |
| { |
| unsigned long timeleft; |
| u32 intr_mask, cmd, val; |
| |
| priv->msg_buf = msg->buf; |
| priv->msg_buf_remaining = priv->msg_len = msg->len; |
| priv->msg_err = 0; |
| priv->msg_read = (msg->flags & I2C_M_RD); |
| reinit_completion(&priv->msg_complete); |
| |
| /* Reset FIFO */ |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MFIFOCTRL, |
| XLP9XX_I2C_MFIFOCTRL_RST); |
| |
| /* set FIFO threshold if reading */ |
| if (priv->msg_read) |
| xlp9xx_i2c_update_rx_fifo_thres(priv); |
| |
| /* set slave addr */ |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_SLAVEADDR, |
| (msg->addr << XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT) | |
| (priv->msg_read ? XLP9XX_I2C_SLAVEADDR_RW : 0)); |
| |
| /* Build control word for transfer */ |
| val = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_CTRL); |
| if (!priv->msg_read) |
| val &= ~XLP9XX_I2C_CTRL_FIFORD; |
| else |
| val |= XLP9XX_I2C_CTRL_FIFORD; /* read */ |
| |
| if (msg->flags & I2C_M_TEN) |
| val |= XLP9XX_I2C_CTRL_ADDMODE; /* 10-bit address mode*/ |
| else |
| val &= ~XLP9XX_I2C_CTRL_ADDMODE; |
| |
| /* set data length to be transferred */ |
| val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) | |
| (msg->len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT); |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val); |
| |
| /* fill fifo during tx */ |
| if (!priv->msg_read) |
| xlp9xx_i2c_fill_tx_fifo(priv); |
| |
| /* set interrupt mask */ |
| intr_mask = (XLP9XX_I2C_INTEN_ARLOST | XLP9XX_I2C_INTEN_BUSERR | |
| XLP9XX_I2C_INTEN_NACKADDR | XLP9XX_I2C_INTEN_DATADONE); |
| |
| if (priv->msg_read) { |
| intr_mask |= XLP9XX_I2C_INTEN_MFIFOHI; |
| if (msg->len == 0) |
| intr_mask |= XLP9XX_I2C_INTEN_SADDR; |
| } else { |
| if (msg->len == 0) |
| intr_mask |= XLP9XX_I2C_INTEN_SADDR; |
| else |
| intr_mask |= XLP9XX_I2C_INTEN_MFIFOEMTY; |
| } |
| xlp9xx_i2c_unmask_irq(priv, intr_mask); |
| |
| /* set cmd reg */ |
| cmd = XLP9XX_I2C_CMD_START; |
| cmd |= (priv->msg_read ? XLP9XX_I2C_CMD_READ : XLP9XX_I2C_CMD_WRITE); |
| if (last_msg) |
| cmd |= XLP9XX_I2C_CMD_STOP; |
| |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CMD, cmd); |
| |
| timeleft = msecs_to_jiffies(XLP9XX_I2C_TIMEOUT_MS); |
| timeleft = wait_for_completion_timeout(&priv->msg_complete, timeleft); |
| |
| if (priv->msg_err) { |
| dev_dbg(priv->dev, "transfer error %x!\n", priv->msg_err); |
| if (priv->msg_err & XLP9XX_I2C_INTEN_BUSERR) |
| xlp9xx_i2c_init(priv); |
| return -EIO; |
| } |
| |
| if (timeleft == 0) { |
| dev_dbg(priv->dev, "i2c transfer timed out!\n"); |
| xlp9xx_i2c_init(priv); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int xlp9xx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, |
| int num) |
| { |
| int i, ret; |
| struct xlp9xx_i2c_dev *priv = i2c_get_adapdata(adap); |
| |
| for (i = 0; i < num; i++) { |
| ret = xlp9xx_i2c_xfer_msg(priv, &msgs[i], i == num - 1); |
| if (ret != 0) |
| return ret; |
| } |
| |
| return num; |
| } |
| |
| static u32 xlp9xx_i2c_functionality(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C | |
| I2C_FUNC_10BIT_ADDR; |
| } |
| |
| static struct i2c_algorithm xlp9xx_i2c_algo = { |
| .master_xfer = xlp9xx_i2c_xfer, |
| .functionality = xlp9xx_i2c_functionality, |
| }; |
| |
| static int xlp9xx_i2c_get_frequency(struct platform_device *pdev, |
| struct xlp9xx_i2c_dev *priv) |
| { |
| u32 freq; |
| int err; |
| |
| err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq); |
| if (err) { |
| freq = XLP9XX_I2C_DEFAULT_FREQ; |
| dev_dbg(&pdev->dev, "using default frequency %u\n", freq); |
| } else if (freq == 0 || freq > XLP9XX_I2C_HIGH_FREQ) { |
| dev_warn(&pdev->dev, "invalid frequency %u, using default\n", |
| freq); |
| freq = XLP9XX_I2C_DEFAULT_FREQ; |
| } |
| priv->clk_hz = freq; |
| |
| return 0; |
| } |
| |
| static int xlp9xx_i2c_probe(struct platform_device *pdev) |
| { |
| struct xlp9xx_i2c_dev *priv; |
| struct resource *res; |
| int err = 0; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| priv->irq = platform_get_irq(pdev, 0); |
| if (priv->irq <= 0) { |
| dev_err(&pdev->dev, "invalid irq!\n"); |
| return priv->irq; |
| } |
| |
| xlp9xx_i2c_get_frequency(pdev, priv); |
| xlp9xx_i2c_init(priv); |
| |
| err = devm_request_irq(&pdev->dev, priv->irq, xlp9xx_i2c_isr, 0, |
| pdev->name, priv); |
| if (err) { |
| dev_err(&pdev->dev, "IRQ request failed!\n"); |
| return err; |
| } |
| |
| init_completion(&priv->msg_complete); |
| priv->adapter.dev.parent = &pdev->dev; |
| priv->adapter.algo = &xlp9xx_i2c_algo; |
| priv->adapter.dev.of_node = pdev->dev.of_node; |
| priv->dev = &pdev->dev; |
| |
| snprintf(priv->adapter.name, sizeof(priv->adapter.name), "xlp9xx-i2c"); |
| i2c_set_adapdata(&priv->adapter, priv); |
| |
| err = i2c_add_adapter(&priv->adapter); |
| if (err) |
| return err; |
| |
| platform_set_drvdata(pdev, priv); |
| dev_dbg(&pdev->dev, "I2C bus:%d added\n", priv->adapter.nr); |
| |
| return 0; |
| } |
| |
| static int xlp9xx_i2c_remove(struct platform_device *pdev) |
| { |
| struct xlp9xx_i2c_dev *priv; |
| |
| priv = platform_get_drvdata(pdev); |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0); |
| synchronize_irq(priv->irq); |
| i2c_del_adapter(&priv->adapter); |
| xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, 0); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id xlp9xx_i2c_of_match[] = { |
| { .compatible = "netlogic,xlp980-i2c", }, |
| { /* sentinel */ }, |
| }; |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id xlp9xx_i2c_acpi_ids[] = { |
| {"BRCM9007", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, xlp9xx_i2c_acpi_ids); |
| #endif |
| |
| static struct platform_driver xlp9xx_i2c_driver = { |
| .probe = xlp9xx_i2c_probe, |
| .remove = xlp9xx_i2c_remove, |
| .driver = { |
| .name = "xlp9xx-i2c", |
| .of_match_table = xlp9xx_i2c_of_match, |
| .acpi_match_table = ACPI_PTR(xlp9xx_i2c_acpi_ids), |
| }, |
| }; |
| |
| module_platform_driver(xlp9xx_i2c_driver); |
| |
| MODULE_AUTHOR("Subhendu Sekhar Behera <sbehera@broadcom.com>"); |
| MODULE_DESCRIPTION("XLP9XX/5XX I2C Bus Controller Driver"); |
| MODULE_LICENSE("GPL v2"); |