| /* |
| * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver |
| * |
| * Header file for Host Controller registers and I/O accessors. |
| * |
| * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| */ |
| #ifndef __SDHCI_HW_H |
| #define __SDHCI_HW_H |
| |
| #include <linux/scatterlist.h> |
| #include <linux/compiler.h> |
| #include <linux/types.h> |
| #include <linux/io.h> |
| |
| #include <linux/mmc/host.h> |
| |
| /* |
| * Controller registers |
| */ |
| |
| #define SDHCI_DMA_ADDRESS 0x00 |
| #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS |
| |
| #define SDHCI_BLOCK_SIZE 0x04 |
| #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) |
| |
| #define SDHCI_BLOCK_COUNT 0x06 |
| |
| #define SDHCI_ARGUMENT 0x08 |
| |
| #define SDHCI_TRANSFER_MODE 0x0C |
| #define SDHCI_TRNS_DMA 0x01 |
| #define SDHCI_TRNS_BLK_CNT_EN 0x02 |
| #define SDHCI_TRNS_AUTO_CMD12 0x04 |
| #define SDHCI_TRNS_AUTO_CMD23 0x08 |
| #define SDHCI_TRNS_READ 0x10 |
| #define SDHCI_TRNS_MULTI 0x20 |
| |
| #define SDHCI_COMMAND 0x0E |
| #define SDHCI_CMD_RESP_MASK 0x03 |
| #define SDHCI_CMD_CRC 0x08 |
| #define SDHCI_CMD_INDEX 0x10 |
| #define SDHCI_CMD_DATA 0x20 |
| #define SDHCI_CMD_ABORTCMD 0xC0 |
| |
| #define SDHCI_CMD_RESP_NONE 0x00 |
| #define SDHCI_CMD_RESP_LONG 0x01 |
| #define SDHCI_CMD_RESP_SHORT 0x02 |
| #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 |
| |
| #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) |
| #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) |
| |
| #define SDHCI_RESPONSE 0x10 |
| |
| #define SDHCI_BUFFER 0x20 |
| |
| #define SDHCI_PRESENT_STATE 0x24 |
| #define SDHCI_CMD_INHIBIT 0x00000001 |
| #define SDHCI_DATA_INHIBIT 0x00000002 |
| #define SDHCI_DOING_WRITE 0x00000100 |
| #define SDHCI_DOING_READ 0x00000200 |
| #define SDHCI_SPACE_AVAILABLE 0x00000400 |
| #define SDHCI_DATA_AVAILABLE 0x00000800 |
| #define SDHCI_CARD_PRESENT 0x00010000 |
| #define SDHCI_WRITE_PROTECT 0x00080000 |
| #define SDHCI_DATA_LVL_MASK 0x00F00000 |
| #define SDHCI_DATA_LVL_SHIFT 20 |
| #define SDHCI_DATA_0_LVL_MASK 0x00100000 |
| |
| #define SDHCI_HOST_CONTROL 0x28 |
| #define SDHCI_CTRL_LED 0x01 |
| #define SDHCI_CTRL_4BITBUS 0x02 |
| #define SDHCI_CTRL_HISPD 0x04 |
| #define SDHCI_CTRL_DMA_MASK 0x18 |
| #define SDHCI_CTRL_SDMA 0x00 |
| #define SDHCI_CTRL_ADMA1 0x08 |
| #define SDHCI_CTRL_ADMA32 0x10 |
| #define SDHCI_CTRL_ADMA64 0x18 |
| #define SDHCI_CTRL_8BITBUS 0x20 |
| #define SDHCI_CTRL_CDTEST_INS 0x40 |
| #define SDHCI_CTRL_CDTEST_EN 0x80 |
| |
| #define SDHCI_POWER_CONTROL 0x29 |
| #define SDHCI_POWER_ON 0x01 |
| #define SDHCI_POWER_180 0x0A |
| #define SDHCI_POWER_300 0x0C |
| #define SDHCI_POWER_330 0x0E |
| |
| #define SDHCI_BLOCK_GAP_CONTROL 0x2A |
| |
| #define SDHCI_WAKE_UP_CONTROL 0x2B |
| #define SDHCI_WAKE_ON_INT 0x01 |
| #define SDHCI_WAKE_ON_INSERT 0x02 |
| #define SDHCI_WAKE_ON_REMOVE 0x04 |
| |
| #define SDHCI_CLOCK_CONTROL 0x2C |
| #define SDHCI_DIVIDER_SHIFT 8 |
| #define SDHCI_DIVIDER_HI_SHIFT 6 |
| #define SDHCI_DIV_MASK 0xFF |
| #define SDHCI_DIV_MASK_LEN 8 |
| #define SDHCI_DIV_HI_MASK 0x300 |
| #define SDHCI_PROG_CLOCK_MODE 0x0020 |
| #define SDHCI_CLOCK_CARD_EN 0x0004 |
| #define SDHCI_CLOCK_INT_STABLE 0x0002 |
| #define SDHCI_CLOCK_INT_EN 0x0001 |
| |
| #define SDHCI_TIMEOUT_CONTROL 0x2E |
| |
| #define SDHCI_SOFTWARE_RESET 0x2F |
| #define SDHCI_RESET_ALL 0x01 |
| #define SDHCI_RESET_CMD 0x02 |
| #define SDHCI_RESET_DATA 0x04 |
| |
| #define SDHCI_INT_STATUS 0x30 |
| #define SDHCI_INT_ENABLE 0x34 |
| #define SDHCI_SIGNAL_ENABLE 0x38 |
| #define SDHCI_INT_RESPONSE 0x00000001 |
| #define SDHCI_INT_DATA_END 0x00000002 |
| #define SDHCI_INT_BLK_GAP 0x00000004 |
| #define SDHCI_INT_DMA_END 0x00000008 |
| #define SDHCI_INT_SPACE_AVAIL 0x00000010 |
| #define SDHCI_INT_DATA_AVAIL 0x00000020 |
| #define SDHCI_INT_CARD_INSERT 0x00000040 |
| #define SDHCI_INT_CARD_REMOVE 0x00000080 |
| #define SDHCI_INT_CARD_INT 0x00000100 |
| #define SDHCI_INT_RETUNE 0x00001000 |
| #define SDHCI_INT_ERROR 0x00008000 |
| #define SDHCI_INT_TIMEOUT 0x00010000 |
| #define SDHCI_INT_CRC 0x00020000 |
| #define SDHCI_INT_END_BIT 0x00040000 |
| #define SDHCI_INT_INDEX 0x00080000 |
| #define SDHCI_INT_DATA_TIMEOUT 0x00100000 |
| #define SDHCI_INT_DATA_CRC 0x00200000 |
| #define SDHCI_INT_DATA_END_BIT 0x00400000 |
| #define SDHCI_INT_BUS_POWER 0x00800000 |
| #define SDHCI_INT_ACMD12ERR 0x01000000 |
| #define SDHCI_INT_ADMA_ERROR 0x02000000 |
| |
| #define SDHCI_INT_NORMAL_MASK 0x00007FFF |
| #define SDHCI_INT_ERROR_MASK 0xFFFF8000 |
| |
| #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ |
| SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) |
| #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ |
| SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ |
| SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ |
| SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ |
| SDHCI_INT_BLK_GAP) |
| #define SDHCI_INT_ALL_MASK ((unsigned int)-1) |
| |
| #define SDHCI_ACMD12_ERR 0x3C |
| |
| #define SDHCI_HOST_CONTROL2 0x3E |
| #define SDHCI_CTRL_UHS_MASK 0x0007 |
| #define SDHCI_CTRL_UHS_SDR12 0x0000 |
| #define SDHCI_CTRL_UHS_SDR25 0x0001 |
| #define SDHCI_CTRL_UHS_SDR50 0x0002 |
| #define SDHCI_CTRL_UHS_SDR104 0x0003 |
| #define SDHCI_CTRL_UHS_DDR50 0x0004 |
| #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ |
| #define SDHCI_CTRL_VDD_180 0x0008 |
| #define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 |
| #define SDHCI_CTRL_DRV_TYPE_B 0x0000 |
| #define SDHCI_CTRL_DRV_TYPE_A 0x0010 |
| #define SDHCI_CTRL_DRV_TYPE_C 0x0020 |
| #define SDHCI_CTRL_DRV_TYPE_D 0x0030 |
| #define SDHCI_CTRL_EXEC_TUNING 0x0040 |
| #define SDHCI_CTRL_TUNED_CLK 0x0080 |
| #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 |
| |
| #define SDHCI_CAPABILITIES 0x40 |
| #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F |
| #define SDHCI_TIMEOUT_CLK_SHIFT 0 |
| #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 |
| #define SDHCI_CLOCK_BASE_MASK 0x00003F00 |
| #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 |
| #define SDHCI_CLOCK_BASE_SHIFT 8 |
| #define SDHCI_MAX_BLOCK_MASK 0x00030000 |
| #define SDHCI_MAX_BLOCK_SHIFT 16 |
| #define SDHCI_CAN_DO_8BIT 0x00040000 |
| #define SDHCI_CAN_DO_ADMA2 0x00080000 |
| #define SDHCI_CAN_DO_ADMA1 0x00100000 |
| #define SDHCI_CAN_DO_HISPD 0x00200000 |
| #define SDHCI_CAN_DO_SDMA 0x00400000 |
| #define SDHCI_CAN_DO_SUSPEND 0x00800000 |
| #define SDHCI_CAN_VDD_330 0x01000000 |
| #define SDHCI_CAN_VDD_300 0x02000000 |
| #define SDHCI_CAN_VDD_180 0x04000000 |
| #define SDHCI_CAN_64BIT 0x10000000 |
| |
| #define SDHCI_SUPPORT_SDR50 0x00000001 |
| #define SDHCI_SUPPORT_SDR104 0x00000002 |
| #define SDHCI_SUPPORT_DDR50 0x00000004 |
| #define SDHCI_DRIVER_TYPE_A 0x00000010 |
| #define SDHCI_DRIVER_TYPE_C 0x00000020 |
| #define SDHCI_DRIVER_TYPE_D 0x00000040 |
| #define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 |
| #define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 |
| #define SDHCI_USE_SDR50_TUNING 0x00002000 |
| #define SDHCI_RETUNING_MODE_MASK 0x0000C000 |
| #define SDHCI_RETUNING_MODE_SHIFT 14 |
| #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 |
| #define SDHCI_CLOCK_MUL_SHIFT 16 |
| #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ |
| |
| #define SDHCI_CAPABILITIES_1 0x44 |
| |
| #define SDHCI_MAX_CURRENT 0x48 |
| #define SDHCI_MAX_CURRENT_LIMIT 0xFF |
| #define SDHCI_MAX_CURRENT_330_MASK 0x0000FF |
| #define SDHCI_MAX_CURRENT_330_SHIFT 0 |
| #define SDHCI_MAX_CURRENT_300_MASK 0x00FF00 |
| #define SDHCI_MAX_CURRENT_300_SHIFT 8 |
| #define SDHCI_MAX_CURRENT_180_MASK 0xFF0000 |
| #define SDHCI_MAX_CURRENT_180_SHIFT 16 |
| #define SDHCI_MAX_CURRENT_MULTIPLIER 4 |
| |
| /* 4C-4F reserved for more max current */ |
| |
| #define SDHCI_SET_ACMD12_ERROR 0x50 |
| #define SDHCI_SET_INT_ERROR 0x52 |
| |
| #define SDHCI_ADMA_ERROR 0x54 |
| |
| /* 55-57 reserved */ |
| |
| #define SDHCI_ADMA_ADDRESS 0x58 |
| #define SDHCI_ADMA_ADDRESS_HI 0x5C |
| |
| /* 60-FB reserved */ |
| |
| #define SDHCI_PRESET_FOR_SDR12 0x66 |
| #define SDHCI_PRESET_FOR_SDR25 0x68 |
| #define SDHCI_PRESET_FOR_SDR50 0x6A |
| #define SDHCI_PRESET_FOR_SDR104 0x6C |
| #define SDHCI_PRESET_FOR_DDR50 0x6E |
| #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ |
| #define SDHCI_PRESET_DRV_MASK 0xC000 |
| #define SDHCI_PRESET_DRV_SHIFT 14 |
| #define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400 |
| #define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10 |
| #define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF |
| #define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0 |
| |
| #define SDHCI_SLOT_INT_STATUS 0xFC |
| |
| #define SDHCI_HOST_VERSION 0xFE |
| #define SDHCI_VENDOR_VER_MASK 0xFF00 |
| #define SDHCI_VENDOR_VER_SHIFT 8 |
| #define SDHCI_SPEC_VER_MASK 0x00FF |
| #define SDHCI_SPEC_VER_SHIFT 0 |
| #define SDHCI_SPEC_100 0 |
| #define SDHCI_SPEC_200 1 |
| #define SDHCI_SPEC_300 2 |
| |
| /* |
| * End of controller registers. |
| */ |
| |
| #define SDHCI_MAX_DIV_SPEC_200 256 |
| #define SDHCI_MAX_DIV_SPEC_300 2046 |
| |
| /* |
| * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. |
| */ |
| #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) |
| #define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12) |
| |
| /* ADMA2 32-bit DMA descriptor size */ |
| #define SDHCI_ADMA2_32_DESC_SZ 8 |
| |
| /* ADMA2 32-bit descriptor */ |
| struct sdhci_adma2_32_desc { |
| __le16 cmd; |
| __le16 len; |
| __le32 addr; |
| } __packed __aligned(4); |
| |
| /* ADMA2 data alignment */ |
| #define SDHCI_ADMA2_ALIGN 4 |
| #define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1) |
| |
| /* |
| * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte |
| * alignment for the descriptor table even in 32-bit DMA mode. Memory |
| * allocation is at least 8 byte aligned anyway, so just stipulate 8 always. |
| */ |
| #define SDHCI_ADMA2_DESC_ALIGN 8 |
| |
| /* ADMA2 64-bit DMA descriptor size */ |
| #define SDHCI_ADMA2_64_DESC_SZ 12 |
| |
| /* |
| * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte |
| * aligned. |
| */ |
| struct sdhci_adma2_64_desc { |
| __le16 cmd; |
| __le16 len; |
| __le32 addr_lo; |
| __le32 addr_hi; |
| } __packed __aligned(4); |
| |
| #define ADMA2_TRAN_VALID 0x21 |
| #define ADMA2_NOP_END_VALID 0x3 |
| #define ADMA2_END 0x2 |
| |
| /* |
| * Maximum segments assuming a 512KiB maximum requisition size and a minimum |
| * 4KiB page size. |
| */ |
| #define SDHCI_MAX_SEGS 128 |
| |
| /* Allow for a a command request and a data request at the same time */ |
| #define SDHCI_MAX_MRQS 2 |
| |
| enum sdhci_cookie { |
| COOKIE_UNMAPPED, |
| COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */ |
| COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */ |
| }; |
| |
| struct sdhci_host { |
| /* Data set by hardware interface driver */ |
| const char *hw_name; /* Hardware bus name */ |
| |
| unsigned int quirks; /* Deviations from spec. */ |
| |
| /* Controller doesn't honor resets unless we touch the clock register */ |
| #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) |
| /* Controller has bad caps bits, but really supports DMA */ |
| #define SDHCI_QUIRK_FORCE_DMA (1<<1) |
| /* Controller doesn't like to be reset when there is no card inserted. */ |
| #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) |
| /* Controller doesn't like clearing the power reg before a change */ |
| #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) |
| /* Controller has flaky internal state so reset it on each ios change */ |
| #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) |
| /* Controller has an unusable DMA engine */ |
| #define SDHCI_QUIRK_BROKEN_DMA (1<<5) |
| /* Controller has an unusable ADMA engine */ |
| #define SDHCI_QUIRK_BROKEN_ADMA (1<<6) |
| /* Controller can only DMA from 32-bit aligned addresses */ |
| #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) |
| /* Controller can only DMA chunk sizes that are a multiple of 32 bits */ |
| #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) |
| /* Controller can only ADMA chunks that are a multiple of 32 bits */ |
| #define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) |
| /* Controller needs to be reset after each request to stay stable */ |
| #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) |
| /* Controller needs voltage and power writes to happen separately */ |
| #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) |
| /* Controller provides an incorrect timeout value for transfers */ |
| #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) |
| /* Controller has an issue with buffer bits for small transfers */ |
| #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) |
| /* Controller does not provide transfer-complete interrupt when not busy */ |
| #define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) |
| /* Controller has unreliable card detection */ |
| #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) |
| /* Controller reports inverted write-protect state */ |
| #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) |
| /* Controller does not like fast PIO transfers */ |
| #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) |
| /* Controller has to be forced to use block size of 2048 bytes */ |
| #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) |
| /* Controller cannot do multi-block transfers */ |
| #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) |
| /* Controller can only handle 1-bit data transfers */ |
| #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) |
| /* Controller needs 10ms delay between applying power and clock */ |
| #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) |
| /* Controller uses SDCLK instead of TMCLK for data timeouts */ |
| #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) |
| /* Controller reports wrong base clock capability */ |
| #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) |
| /* Controller cannot support End Attribute in NOP ADMA descriptor */ |
| #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) |
| /* Controller is missing device caps. Use caps provided by host */ |
| #define SDHCI_QUIRK_MISSING_CAPS (1<<27) |
| /* Controller uses Auto CMD12 command to stop the transfer */ |
| #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) |
| /* Controller doesn't have HISPD bit field in HI-SPEED SD card */ |
| #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) |
| /* Controller treats ADMA descriptors with length 0000h incorrectly */ |
| #define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) |
| /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ |
| #define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) |
| |
| unsigned int quirks2; /* More deviations from spec. */ |
| |
| #define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) |
| #define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) |
| /* The system physically doesn't support 1.8v, even if the host does */ |
| #define SDHCI_QUIRK2_NO_1_8_V (1<<2) |
| #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) |
| #define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) |
| /* Controller has a non-standard host control register */ |
| #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) |
| /* Controller does not support HS200 */ |
| #define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) |
| /* Controller does not support DDR50 */ |
| #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) |
| /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ |
| #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) |
| /* Controller does not support 64-bit DMA */ |
| #define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) |
| /* need clear transfer mode register before send cmd */ |
| #define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) |
| /* Capability register bit-63 indicates HS400 support */ |
| #define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) |
| /* forced tuned clock */ |
| #define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) |
| /* disable the block count for single block transactions */ |
| #define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) |
| /* Controller broken with using ACMD23 */ |
| #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) |
| /* Broken Clock divider zero in controller */ |
| #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) |
| |
| int irq; /* Device IRQ */ |
| void __iomem *ioaddr; /* Mapped address */ |
| |
| const struct sdhci_ops *ops; /* Low level hw interface */ |
| |
| /* Internal data */ |
| struct mmc_host *mmc; /* MMC structure */ |
| struct mmc_host_ops mmc_host_ops; /* MMC host ops */ |
| u64 dma_mask; /* custom DMA mask */ |
| |
| #if IS_ENABLED(CONFIG_LEDS_CLASS) |
| struct led_classdev led; /* LED control */ |
| char led_name[32]; |
| #endif |
| |
| spinlock_t lock; /* Mutex */ |
| |
| int flags; /* Host attributes */ |
| #define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ |
| #define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ |
| #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ |
| #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ |
| #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ |
| #define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ |
| #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ |
| #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ |
| #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ |
| #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ |
| #define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ |
| #define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */ |
| #define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */ |
| #define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */ |
| |
| unsigned int version; /* SDHCI spec. version */ |
| |
| unsigned int max_clk; /* Max possible freq (MHz) */ |
| unsigned int timeout_clk; /* Timeout freq (KHz) */ |
| unsigned int clk_mul; /* Clock Muliplier value */ |
| |
| unsigned int clock; /* Current clock (MHz) */ |
| u8 pwr; /* Current voltage */ |
| |
| bool runtime_suspended; /* Host is runtime suspended */ |
| bool bus_on; /* Bus power prevents runtime suspend */ |
| bool preset_enabled; /* Preset is enabled */ |
| bool pending_reset; /* Cmd/data reset is pending */ |
| |
| struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ |
| struct mmc_command *cmd; /* Current command */ |
| struct mmc_command *data_cmd; /* Current data command */ |
| struct mmc_data *data; /* Current data request */ |
| unsigned int data_early:1; /* Data finished before cmd */ |
| |
| struct sg_mapping_iter sg_miter; /* SG state for PIO */ |
| unsigned int blocks; /* remaining PIO blocks */ |
| |
| int sg_count; /* Mapped sg entries */ |
| |
| void *adma_table; /* ADMA descriptor table */ |
| void *align_buffer; /* Bounce buffer */ |
| |
| size_t adma_table_sz; /* ADMA descriptor table size */ |
| size_t align_buffer_sz; /* Bounce buffer size */ |
| |
| dma_addr_t adma_addr; /* Mapped ADMA descr. table */ |
| dma_addr_t align_addr; /* Mapped bounce buffer */ |
| |
| unsigned int desc_sz; /* ADMA descriptor size */ |
| |
| struct tasklet_struct finish_tasklet; /* Tasklet structures */ |
| |
| struct timer_list timer; /* Timer for timeouts */ |
| struct timer_list data_timer; /* Timer for data timeouts */ |
| |
| u32 caps; /* CAPABILITY_0 */ |
| u32 caps1; /* CAPABILITY_1 */ |
| bool read_caps; /* Capability flags have been read */ |
| |
| unsigned int ocr_avail_sdio; /* OCR bit masks */ |
| unsigned int ocr_avail_sd; |
| unsigned int ocr_avail_mmc; |
| u32 ocr_mask; /* available voltages */ |
| |
| unsigned timing; /* Current timing */ |
| |
| u32 thread_isr; |
| |
| /* cached registers */ |
| u32 ier; |
| |
| wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ |
| unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ |
| |
| unsigned int tuning_count; /* Timer count for re-tuning */ |
| unsigned int tuning_mode; /* Re-tuning mode supported by host */ |
| #define SDHCI_TUNING_MODE_1 0 |
| #define SDHCI_TUNING_MODE_2 1 |
| #define SDHCI_TUNING_MODE_3 2 |
| |
| unsigned long private[0] ____cacheline_aligned; |
| }; |
| |
| struct sdhci_ops { |
| #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS |
| u32 (*read_l)(struct sdhci_host *host, int reg); |
| u16 (*read_w)(struct sdhci_host *host, int reg); |
| u8 (*read_b)(struct sdhci_host *host, int reg); |
| void (*write_l)(struct sdhci_host *host, u32 val, int reg); |
| void (*write_w)(struct sdhci_host *host, u16 val, int reg); |
| void (*write_b)(struct sdhci_host *host, u8 val, int reg); |
| #endif |
| |
| void (*set_clock)(struct sdhci_host *host, unsigned int clock); |
| void (*set_power)(struct sdhci_host *host, unsigned char mode, |
| unsigned short vdd); |
| |
| int (*enable_dma)(struct sdhci_host *host); |
| unsigned int (*get_max_clock)(struct sdhci_host *host); |
| unsigned int (*get_min_clock)(struct sdhci_host *host); |
| unsigned int (*get_timeout_clock)(struct sdhci_host *host); |
| unsigned int (*get_max_timeout_count)(struct sdhci_host *host); |
| void (*set_timeout)(struct sdhci_host *host, |
| struct mmc_command *cmd); |
| void (*set_bus_width)(struct sdhci_host *host, int width); |
| void (*platform_send_init_74_clocks)(struct sdhci_host *host, |
| u8 power_mode); |
| unsigned int (*get_ro)(struct sdhci_host *host); |
| void (*reset)(struct sdhci_host *host, u8 mask); |
| int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode); |
| void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); |
| void (*hw_reset)(struct sdhci_host *host); |
| void (*adma_workaround)(struct sdhci_host *host, u32 intmask); |
| void (*card_event)(struct sdhci_host *host); |
| void (*voltage_switch)(struct sdhci_host *host); |
| int (*select_drive_strength)(struct sdhci_host *host, |
| struct mmc_card *card, |
| unsigned int max_dtr, int host_drv, |
| int card_drv, int *drv_type); |
| }; |
| |
| #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS |
| |
| static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) |
| { |
| if (unlikely(host->ops->write_l)) |
| host->ops->write_l(host, val, reg); |
| else |
| writel(val, host->ioaddr + reg); |
| } |
| |
| static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) |
| { |
| if (unlikely(host->ops->write_w)) |
| host->ops->write_w(host, val, reg); |
| else |
| writew(val, host->ioaddr + reg); |
| } |
| |
| static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) |
| { |
| if (unlikely(host->ops->write_b)) |
| host->ops->write_b(host, val, reg); |
| else |
| writeb(val, host->ioaddr + reg); |
| } |
| |
| static inline u32 sdhci_readl(struct sdhci_host *host, int reg) |
| { |
| if (unlikely(host->ops->read_l)) |
| return host->ops->read_l(host, reg); |
| else |
| return readl(host->ioaddr + reg); |
| } |
| |
| static inline u16 sdhci_readw(struct sdhci_host *host, int reg) |
| { |
| if (unlikely(host->ops->read_w)) |
| return host->ops->read_w(host, reg); |
| else |
| return readw(host->ioaddr + reg); |
| } |
| |
| static inline u8 sdhci_readb(struct sdhci_host *host, int reg) |
| { |
| if (unlikely(host->ops->read_b)) |
| return host->ops->read_b(host, reg); |
| else |
| return readb(host->ioaddr + reg); |
| } |
| |
| #else |
| |
| static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) |
| { |
| writel(val, host->ioaddr + reg); |
| } |
| |
| static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) |
| { |
| writew(val, host->ioaddr + reg); |
| } |
| |
| static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) |
| { |
| writeb(val, host->ioaddr + reg); |
| } |
| |
| static inline u32 sdhci_readl(struct sdhci_host *host, int reg) |
| { |
| return readl(host->ioaddr + reg); |
| } |
| |
| static inline u16 sdhci_readw(struct sdhci_host *host, int reg) |
| { |
| return readw(host->ioaddr + reg); |
| } |
| |
| static inline u8 sdhci_readb(struct sdhci_host *host, int reg) |
| { |
| return readb(host->ioaddr + reg); |
| } |
| |
| #endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */ |
| |
| extern struct sdhci_host *sdhci_alloc_host(struct device *dev, |
| size_t priv_size); |
| extern void sdhci_free_host(struct sdhci_host *host); |
| |
| static inline void *sdhci_priv(struct sdhci_host *host) |
| { |
| return (void *)host->private; |
| } |
| |
| extern void sdhci_card_detect(struct sdhci_host *host); |
| extern void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, |
| u32 *caps1); |
| extern int sdhci_setup_host(struct sdhci_host *host); |
| extern int __sdhci_add_host(struct sdhci_host *host); |
| extern int sdhci_add_host(struct sdhci_host *host); |
| extern void sdhci_remove_host(struct sdhci_host *host, int dead); |
| extern void sdhci_send_command(struct sdhci_host *host, |
| struct mmc_command *cmd); |
| |
| static inline void sdhci_read_caps(struct sdhci_host *host) |
| { |
| __sdhci_read_caps(host, NULL, NULL, NULL); |
| } |
| |
| static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host) |
| { |
| return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED); |
| } |
| |
| u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, |
| unsigned int *actual_clock); |
| void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); |
| void sdhci_set_power(struct sdhci_host *host, unsigned char mode, |
| unsigned short vdd); |
| void sdhci_set_bus_width(struct sdhci_host *host, int width); |
| void sdhci_reset(struct sdhci_host *host, u8 mask); |
| void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); |
| |
| #ifdef CONFIG_PM |
| extern int sdhci_suspend_host(struct sdhci_host *host); |
| extern int sdhci_resume_host(struct sdhci_host *host); |
| extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); |
| extern int sdhci_runtime_suspend_host(struct sdhci_host *host); |
| extern int sdhci_runtime_resume_host(struct sdhci_host *host); |
| #endif |
| |
| #endif /* __SDHCI_HW_H */ |