ARM: dts: imx6q-sabreauto: Add basic support
mx6qsabreauto is a board based on mx6q SoC with the following features:
- 2GB of DDR3
- 2 USB ports
- 1 HDMI output port
- SPI NOR
- 2 LVDS LCD ports
- Gigabit Ethernet
- Camera
- eMMC and SD card slot
- Multichannel Audio
- CAN
- SATA
- NAND
- PCIE
- Video Input
Add very basic support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c1ce813..ccafe36 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -49,6 +49,7 @@
imx53-qsb.dtb \
imx53-smd.dtb \
imx6q-arm2.dtb \
+ imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..826e4ad
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Automotive Board";
+ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ soc {
+ aips-bus@02000000 { /* AIPS1 */
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
+ 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
+ >;
+ };
+ };
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ uart4: serial@021f0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "okay";
+ };
+
+ ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
+ cd-gpios = <&gpio6 15 0>;
+ wp-gpios = <&gpio1 13 0>;
+ status = "okay";
+ };
+ };
+ };
+};