mwifiex: enable traffic only when port is open
This patch adds support to enable data traffic only when port is open.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index e1b62bf..8fa363a 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -77,7 +77,7 @@
priv->media_connected = false;
eth_broadcast_addr(priv->curr_addr);
-
+ priv->port_open = false;
priv->pkt_tx_ctrl = 0;
priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
priv->data_rate = 0; /* Initially indicate the rate as auto */
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 56b024a..3cda1f9 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -783,6 +783,8 @@
if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled)
priv->scan_block = true;
+ else
+ priv->port_open = true;
done:
/* Need to indicate IOCTL complete */
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index c59430e..6f98d7e 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -519,6 +519,7 @@
u8 frame_type;
u8 curr_addr[ETH_ALEN];
u8 media_connected;
+ u8 port_open;
u32 num_tx_timeout;
/* track consecutive timeout */
u8 tx_timeout_cnt;
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 6a85c77..18f269e 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -599,6 +599,7 @@
"info: key: GTK is set\n");
priv->wpa_is_gtk_set = true;
priv->scan_block = false;
+ priv->port_open = true;
}
}
@@ -629,6 +630,7 @@
mwifiex_dbg(priv->adapter, INFO, "info: key: GTK is set\n");
priv->wpa_is_gtk_set = true;
priv->scan_block = false;
+ priv->port_open = true;
}
}
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index f1045d4..72be16e 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -54,6 +54,7 @@
priv->media_connected = false;
priv->scan_block = false;
+ priv->port_open = false;
if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info)) {
@@ -474,7 +475,7 @@
case EVENT_PS_AWAKE:
mwifiex_dbg(adapter, EVENT, "info: EVENT: AWAKE\n");
- if (!adapter->pps_uapsd_mode &&
+ if (!adapter->pps_uapsd_mode && priv->port_open &&
priv->media_connected && adapter->sleep_period.period) {
adapter->pps_uapsd_mode = true;
mwifiex_dbg(adapter, EVENT,
@@ -553,6 +554,7 @@
case EVENT_PORT_RELEASE:
mwifiex_dbg(adapter, EVENT, "event: PORT RELEASE\n");
+ priv->port_open = true;
break;
case EVENT_EXT_SCAN_REPORT:
diff --git a/drivers/net/wireless/mwifiex/uap_event.c b/drivers/net/wireless/mwifiex/uap_event.c
index 7bc1f85..a412c3d 100644
--- a/drivers/net/wireless/mwifiex/uap_event.c
+++ b/drivers/net/wireless/mwifiex/uap_event.c
@@ -176,6 +176,7 @@
break;
case EVENT_UAP_BSS_IDLE:
priv->media_connected = false;
+ priv->port_open = false;
if (netif_carrier_ok(priv->netdev))
netif_carrier_off(priv->netdev);
mwifiex_stop_net_dev_queue(priv->netdev, adapter);
@@ -185,6 +186,7 @@
break;
case EVENT_UAP_BSS_ACTIVE:
priv->media_connected = true;
+ priv->port_open = true;
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
mwifiex_wake_up_net_dev_queue(priv->netdev, adapter);
@@ -192,6 +194,7 @@
case EVENT_UAP_BSS_START:
mwifiex_dbg(adapter, EVENT,
"AP EVENT: event id: %#x\n", eventcause);
+ priv->port_open = false;
memcpy(priv->netdev->dev_addr, adapter->event_body + 2,
ETH_ALEN);
if (priv->hist_data)
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 7995f92..173d366 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -465,6 +465,8 @@
for (i = 0; i < adapter->priv_num; ++i) {
priv = adapter->priv[i];
+ if (priv && !priv->port_open)
+ continue;
if (priv && atomic_read(&priv->wmm.tx_pkts_queued))
return false;
}
@@ -1080,7 +1082,8 @@
priv_tmp = adapter->bss_prio_tbl[j].bss_prio_cur->priv;
- if (atomic_read(&priv_tmp->wmm.tx_pkts_queued) == 0)
+ if (!priv_tmp->port_open ||
+ (atomic_read(&priv_tmp->wmm.tx_pkts_queued) == 0))
continue;
/* iterate over the WMM queues of the BSS */