clk: samsung: pll: Add support for rate configuration of PLL46xx
This patch implements round_rate and set_rate callbacks of PLL46xx
driver to allow reconfiguration of PLL at runtime.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index d963b3e..529e11d 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -411,10 +411,13 @@
/*
* PLL46xx Clock Type
*/
+#define PLL46XX_LOCK_FACTOR 3000
+#define PLL46XX_VSEL_MASK (1)
#define PLL46XX_MDIV_MASK (0x1FF)
#define PLL46XX_PDIV_MASK (0x3F)
#define PLL46XX_SDIV_MASK (0x7)
+#define PLL46XX_VSEL_SHIFT (27)
#define PLL46XX_MDIV_SHIFT (16)
#define PLL46XX_PDIV_SHIFT (8)
#define PLL46XX_SDIV_SHIFT (0)
@@ -422,6 +425,15 @@
#define PLL46XX_KDIV_MASK (0xFFFF)
#define PLL4650C_KDIV_MASK (0xFFF)
#define PLL46XX_KDIV_SHIFT (0)
+#define PLL46XX_MFR_MASK (0x3F)
+#define PLL46XX_MRR_MASK (0x1F)
+#define PLL46XX_KDIV_SHIFT (0)
+#define PLL46XX_MFR_SHIFT (16)
+#define PLL46XX_MRR_SHIFT (24)
+
+#define PLL46XX_ENABLE BIT(31)
+#define PLL46XX_LOCKED BIT(29)
+#define PLL46XX_VSEL BIT(27)
static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
@@ -446,8 +458,102 @@
return (unsigned long)fvco;
}
+static bool samsung_pll46xx_mpk_change(u32 pll_con0, u32 pll_con1,
+ const struct samsung_pll_rate_table *rate)
+{
+ u32 old_mdiv, old_pdiv, old_kdiv;
+
+ old_mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+ old_pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+ old_kdiv = (pll_con1 >> PLL46XX_KDIV_SHIFT) & PLL46XX_KDIV_MASK;
+
+ return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv
+ || old_kdiv != rate->kdiv);
+}
+
+static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate;
+ u32 con0, con1, lock;
+ ktime_t start;
+
+ /* Get required rate settings from table */
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ con0 = __raw_readl(pll->con_reg);
+ con1 = __raw_readl(pll->con_reg + 0x4);
+
+ if (!(samsung_pll46xx_mpk_change(con0, con1, rate))) {
+ /* If only s change, change just s value only*/
+ con0 &= ~(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+ con0 |= rate->sdiv << PLL46XX_SDIV_SHIFT;
+ __raw_writel(con0, pll->con_reg);
+
+ return 0;
+ }
+
+ /* Set PLL lock time. */
+ lock = rate->pdiv * PLL46XX_LOCK_FACTOR;
+ if (lock > 0xffff)
+ /* Maximum lock time bitfield is 16-bit. */
+ lock = 0xffff;
+
+ /* Set PLL PMS and VSEL values. */
+ con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
+ (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
+ (PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) |
+ (PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT));
+ con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) |
+ (rate->pdiv << PLL46XX_PDIV_SHIFT) |
+ (rate->sdiv << PLL46XX_SDIV_SHIFT) |
+ (rate->vsel << PLL46XX_VSEL_SHIFT);
+
+ /* Set PLL K, MFR and MRR values. */
+ con1 = __raw_readl(pll->con_reg + 0x4);
+ con1 &= ~((PLL46XX_KDIV_MASK << PLL46XX_KDIV_SHIFT) |
+ (PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT) |
+ (PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT));
+ con1 |= (rate->kdiv << PLL46XX_KDIV_SHIFT) |
+ (rate->mfr << PLL46XX_MFR_SHIFT) |
+ (rate->mrr << PLL46XX_MRR_SHIFT);
+
+ /* Write configuration to PLL */
+ __raw_writel(lock, pll->lock_reg);
+ __raw_writel(con0, pll->con_reg);
+ __raw_writel(con1, pll->con_reg + 0x4);
+
+ /* Wait for locking. */
+ start = ktime_get();
+ while (!(__raw_readl(pll->con_reg) & PLL46XX_LOCKED)) {
+ ktime_t delta = ktime_sub(ktime_get(), start);
+
+ if (ktime_to_ms(delta) > PLL_TIMEOUT_MS) {
+ pr_err("%s: could not lock PLL %s\n",
+ __func__, __clk_get_name(hw->clk));
+ return -EFAULT;
+ }
+
+ cpu_relax();
+ }
+
+ return 0;
+}
+
static const struct clk_ops samsung_pll46xx_clk_ops = {
.recalc_rate = samsung_pll46xx_recalc_rate,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_pll46xx_set_rate,
+};
+
+static const struct clk_ops samsung_pll46xx_clk_min_ops = {
+ .recalc_rate = samsung_pll46xx_recalc_rate,
};
/*
@@ -675,7 +781,10 @@
case pll_4600:
case pll_4650:
case pll_4650c:
- init.ops = &samsung_pll46xx_clk_ops;
+ if (!pll->rate_table)
+ init.ops = &samsung_pll46xx_clk_min_ops;
+ else
+ init.ops = &samsung_pll46xx_clk_ops;
break;
default:
pr_warn("%s: Unknown pll type for pll clk %s\n",
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index f3c85bf..6c39030 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -53,6 +53,28 @@
.afc = (_afc), \
}
+#define PLL_4600_RATE(_rate, _m, _p, _s, _k, _vsel) \
+ { \
+ .rate = (_rate), \
+ .mdiv = (_m), \
+ .pdiv = (_p), \
+ .sdiv = (_s), \
+ .kdiv = (_k), \
+ .vsel = (_vsel), \
+ }
+
+#define PLL_4650_RATE(_rate, _m, _p, _s, _k, _mfr, _mrr, _vsel) \
+ { \
+ .rate = (_rate), \
+ .mdiv = (_m), \
+ .pdiv = (_p), \
+ .sdiv = (_s), \
+ .kdiv = (_k), \
+ .mfr = (_mfr), \
+ .mrr = (_mrr), \
+ .vsel = (_vsel), \
+ }
+
/* NOTE: Rate table should be kept sorted in descending order. */
struct samsung_pll_rate_table {
@@ -62,6 +84,9 @@
unsigned int sdiv;
unsigned int kdiv;
unsigned int afc;
+ unsigned int mfr;
+ unsigned int mrr;
+ unsigned int vsel;
};
extern struct clk * __init samsung_clk_register_pll2550x(const char *name,