| /* |
| * Copyright 2012 ST-Ericsson AB |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| * |
| * Device Tree for the HREF+ prior to the v60 variant. |
| */ |
| |
| #include "ste-dbx5x0.dtsi" |
| #include "ste-href-ab8500.dtsi" |
| #include "ste-href.dtsi" |
| |
| / { |
| gpio_keys { |
| button@1 { |
| gpios = <&tc3589x_gpio 7 0x4>; |
| }; |
| }; |
| |
| soc { |
| i2c@80004000 { |
| tps61052@33 { |
| compatible = "tps61052"; |
| reg = <0x33>; |
| }; |
| |
| tc35892@42 { |
| compatible = "toshiba,tc35892"; |
| reg = <0x42>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <25 IRQ_TYPE_EDGE_RISING>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&tc35892_hrefprev60_mode>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| tc3589x_gpio: tc3589x_gpio { |
| compatible = "tc3589x-gpio"; |
| interrupts = <0>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| }; |
| |
| ssp@80002000 { |
| /* |
| * On the first generation boards, this SSP/SPI port was connected |
| * to the AB8500. |
| */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ssp0_hrefprev60_mode>; |
| }; |
| |
| // External Micro SD slot |
| sdi0_per1@80126000 { |
| cd-gpios = <&tc3589x_gpio 3 0x4>; |
| }; |
| |
| vmmci: regulator-gpio { |
| gpios = <&tc3589x_gpio 18 0x4>; |
| enable-gpio = <&tc3589x_gpio 17 0x4>; |
| }; |
| |
| pinctrl { |
| /* Set this up using hogs */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ipgpio_hrefprev60_mode>; |
| |
| ssp0 { |
| ssp0_hrefprev60_mode: ssp0_hrefprev60_default { |
| hrefprev60_mux { |
| function = "ssp0"; |
| groups = "ssp0_a_1"; |
| }; |
| hrefprev60_cfg1 { |
| pins = "GPIO145_C13"; /* RXD */ |
| ste,config = <&in_pd>; |
| }; |
| |
| }; |
| }; |
| sdi0 { |
| /* This additional pin needed on early MOP500 and HREFs previous to v60 */ |
| sdi0_default_mode: sdi0_default { |
| hrefprev60_mux { |
| function = "mc0"; |
| groups = "mc0dat31dir_a_1"; |
| }; |
| hrefprev60_cfg1 { |
| pins = "GPIO21_AB3"; /* DAT31DIR */ |
| ste,config = <&out_hi>; |
| }; |
| |
| }; |
| }; |
| tc35892 { |
| tc35892_hrefprev60_mode: tc35892_hrefprev60 { |
| hrefprev60_cfg { |
| pins = "GPIO217_AH12"; |
| ste,config = <&gpio_in_pu>; |
| }; |
| }; |
| }; |
| ipgpio { |
| ipgpio_hrefprev60_mode: ipgpio_hrefprev60 { |
| hrefprev60_mux { |
| function = "ipgpio"; |
| groups = "ipgpio0_c_1", "ipgpio1_c_1"; |
| }; |
| hrefprev60_cfg1 { |
| pins = "GPIO6_AF6", "GPIO7_AG5"; |
| ste,config = <&in_pu>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |