Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gpio_mouse - use standard driver registration method
Input: mark serio and i8042 as suspended when hibernating too
Input: add support for generic GPIO-based matrix keypad
Input: arrange keyboards alphabetically
Input: gpio-keys - avoid possibility of sleeping in timer function
Input: gpio-keys - revert 'change timer to workqueue'
Input: dm355evm_keys - fix kconfig symbol names
Input: wacom - add DTF720a support and fix rotation on Intuos3
Input: i8042 - more reset quirks for MSI Wind-clone netbooks
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9d8f796..a6b989a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -12,6 +12,42 @@
if INPUT_KEYBOARD
+config KEYBOARD_AAED2000
+ tristate "AAED-2000 keyboard"
+ depends on MACH_AAED2000
+ select INPUT_POLLDEV
+ default y
+ help
+ Say Y here to enable the keyboard on the Agilent AAED-2000
+ development board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aaed2000_kbd.
+
+config KEYBOARD_AMIGA
+ tristate "Amiga keyboard"
+ depends on AMIGA
+ help
+ Say Y here if you are running Linux on any AMIGA and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amikbd.
+
+config ATARI_KBD_CORE
+ bool
+
+config KEYBOARD_ATARI
+ tristate "Atari keyboard"
+ depends on ATARI
+ select ATARI_KBD_CORE
+ help
+ Say Y here if you are running Linux on any Atari and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atakbd.
+
config KEYBOARD_ATKBD
tristate "AT keyboard" if EMBEDDED || !X86
default y
@@ -68,16 +104,25 @@
right-hand column will be interpreted as the key shown in the
left-hand column.
-config KEYBOARD_SUNKBD
- tristate "Sun Type 4 and Type 5 keyboard"
- select SERIO
+config KEYBOARD_BFIN
+ tristate "Blackfin BF54x keypad support"
+ depends on (BF54x && !BF544)
help
- Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
- connected either to the Sun keyboard connector or to an serial
- (RS-232) port via a simple adapter.
+ Say Y here if you want to use the BF54x keypad.
To compile this driver as a module, choose M here: the
- module will be called sunkbd.
+ module will be called bf54x-keys.
+
+config KEYBOARD_CORGI
+ tristate "Corgi keyboard"
+ depends on PXA_SHARPSL
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
+ series of PDAs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called corgikbd.
config KEYBOARD_LKKBD
tristate "DECstation/VAXstation LK201/LK401 keyboard"
@@ -91,113 +136,38 @@
To compile this driver as a module, choose M here: the
module will be called lkkbd.
-config KEYBOARD_LOCOMO
- tristate "LoCoMo Keyboard Support"
- depends on SHARP_LOCOMO && INPUT_KEYBOARD
+config KEYBOARD_EP93XX
+ tristate "EP93xx Matrix Keypad support"
+ depends on ARCH_EP93XX
help
- Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+ Say Y here to enable the matrix keypad on the Cirrus EP93XX.
To compile this driver as a module, choose M here: the
- module will be called locomokbd.
+ module will be called ep93xx_keypad.
-config KEYBOARD_XTKBD
- tristate "XT keyboard"
- select SERIO
+config KEYBOARD_GPIO
+ tristate "GPIO Buttons"
+ depends on GENERIC_GPIO
help
- Say Y here if you want to use the old IBM PC/XT keyboard (or
- compatible) on your system. This is only possible with a
- parallel port keyboard adapter, you cannot connect it to the
- keyboard port on a PC that runs Linux.
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
To compile this driver as a module, choose M here: the
- module will be called xtkbd.
+ module will be called gpio_keys.
-config KEYBOARD_NEWTON
- tristate "Newton keyboard"
- select SERIO
+config KEYBOARD_MATRIX
+ tristate "GPIO driven matrix keypad support"
+ depends on GENERIC_GPIO
help
- Say Y here if you have a Newton keyboard on a serial port.
+ Enable support for GPIO driven matrix keypad.
To compile this driver as a module, choose M here: the
- module will be called newtonkbd.
-
-config KEYBOARD_STOWAWAY
- tristate "Stowaway keyboard"
- select SERIO
- help
- Say Y here if you have a Stowaway keyboard on a serial port.
- Stowaway compatible keyboards like Dicota Input-PDA keyboard
- are also supported by this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called stowaway.
-
-config KEYBOARD_CORGI
- tristate "Corgi keyboard"
- depends on PXA_SHARPSL
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
- series of PDAs.
-
- To compile this driver as a module, choose M here: the
- module will be called corgikbd.
-
-config KEYBOARD_SPITZ
- tristate "Spitz keyboard"
- depends on PXA_SHARPSL
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
- SL-C3000 and Sl-C3100 series of PDAs.
-
- To compile this driver as a module, choose M here: the
- module will be called spitzkbd.
-
-config KEYBOARD_TOSA
- tristate "Tosa keyboard"
- depends on MACH_TOSA
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
-
- To compile this driver as a module, choose M here: the
- module will be called tosakbd.
-
-config KEYBOARD_TOSA_USE_EXT_KEYCODES
- bool "Tosa keyboard: use extended keycodes"
- depends on KEYBOARD_TOSA
- default n
- help
- Say Y here to enable the tosa keyboard driver to generate extended
- (>= 127) keycodes. Be aware, that they can't be correctly interpreted
- by either console keyboard driver or by Kdrive keybd driver.
-
- Say Y only if you know, what you are doing!
-
-config KEYBOARD_AMIGA
- tristate "Amiga keyboard"
- depends on AMIGA
- help
- Say Y here if you are running Linux on any AMIGA and have a keyboard
- attached.
-
- To compile this driver as a module, choose M here: the
- module will be called amikbd.
-
-config ATARI_KBD_CORE
- bool
-
-config KEYBOARD_ATARI
- tristate "Atari keyboard"
- depends on ATARI
- select ATARI_KBD_CORE
- help
- Say Y here if you are running Linux on any Atari and have a keyboard
- attached.
-
- To compile this driver as a module, choose M here: the
- module will be called atakbd.
+ module will be called matrix_keypad.
config KEYBOARD_HIL_OLD
tristate "HP HIL keyboard support (simple driver)"
@@ -261,20 +231,39 @@
To compile this driver as a module, choose M here: the
module will be called lm8323.
-config KEYBOARD_OMAP
- tristate "TI OMAP keypad support"
- depends on (ARCH_OMAP1 || ARCH_OMAP2)
+config KEYBOARD_LOCOMO
+ tristate "LoCoMo Keyboard Support"
+ depends on SHARP_LOCOMO
help
- Say Y here if you want to use the OMAP keypad.
+ Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
To compile this driver as a module, choose M here: the
- module will be called omap-keypad.
+ module will be called locomokbd.
+
+config KEYBOARD_MAPLE
+ tristate "Maple bus keyboard"
+ depends on SH_DREAMCAST && MAPLE
+ help
+ Say Y here if you have a Dreamcast console running Linux and have
+ a keyboard attached to its Maple bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maple_keyb.
+
+config KEYBOARD_NEWTON
+ tristate "Newton keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Newton keyboard on a serial port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called newtonkbd.
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
depends on PXA27x || PXA3xx
help
- Enable support for PXA27x/PXA3xx keypad controller
+ Enable support for PXA27x/PXA3xx keypad controller.
To compile this driver as a module, choose M here: the
module will be called pxa27x_keypad.
@@ -288,51 +277,38 @@
To compile this driver as a module, choose M here: the
module will be called pxa930_rotary.
-config KEYBOARD_AAED2000
- tristate "AAED-2000 keyboard"
- depends on MACH_AAED2000
- select INPUT_POLLDEV
+config KEYBOARD_SPITZ
+ tristate "Spitz keyboard"
+ depends on PXA_SHARPSL
default y
help
- Say Y here to enable the keyboard on the Agilent AAED-2000
- development board.
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+ SL-C3000 and Sl-C3100 series of PDAs.
To compile this driver as a module, choose M here: the
- module will be called aaed2000_kbd.
+ module will be called spitzkbd.
-config KEYBOARD_GPIO
- tristate "GPIO Buttons"
- depends on GENERIC_GPIO
+config KEYBOARD_STOWAWAY
+ tristate "Stowaway keyboard"
+ select SERIO
help
- This driver implements support for buttons connected
- to GPIO pins of various CPUs (and some other chips).
-
- Say Y here if your device has buttons connected
- directly to such GPIO pins. Your board-specific
- setup logic must also provide a platform device,
- with configuration data saying which GPIOs are used.
+ Say Y here if you have a Stowaway keyboard on a serial port.
+ Stowaway compatible keyboards like Dicota Input-PDA keyboard
+ are also supported by this driver.
To compile this driver as a module, choose M here: the
- module will be called gpio-keys.
+ module will be called stowaway.
-config KEYBOARD_MAPLE
- tristate "Maple bus keyboard"
- depends on SH_DREAMCAST && MAPLE
+config KEYBOARD_SUNKBD
+ tristate "Sun Type 4 and Type 5 keyboard"
+ select SERIO
help
- Say Y here if you have a Dreamcast console running Linux and have
- a keyboard attached to its Maple bus.
+ Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+ connected either to the Sun keyboard connector or to an serial
+ (RS-232) port via a simple adapter.
To compile this driver as a module, choose M here: the
- module will be called maple_keyb.
-
-config KEYBOARD_BFIN
- tristate "Blackfin BF54x keypad support"
- depends on (BF54x && !BF544)
- help
- Say Y here if you want to use the BF54x keypad.
-
- To compile this driver as a module, choose M here: the
- module will be called bf54x-keys.
+ module will be called sunkbd.
config KEYBOARD_SH_KEYSC
tristate "SuperH KEYSC keypad support"
@@ -344,13 +320,45 @@
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
-config KEYBOARD_EP93XX
- tristate "EP93xx Matrix Keypad support"
- depends on ARCH_EP93XX
+config KEYBOARD_OMAP
+ tristate "TI OMAP keypad support"
+ depends on (ARCH_OMAP1 || ARCH_OMAP2)
help
- Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+ Say Y here if you want to use the OMAP keypad.
To compile this driver as a module, choose M here: the
- module will be called ep93xx_keypad.
+ module will be called omap-keypad.
+
+config KEYBOARD_TOSA
+ tristate "Tosa keyboard"
+ depends on MACH_TOSA
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+
+ To compile this driver as a module, choose M here: the
+ module will be called tosakbd.
+
+config KEYBOARD_TOSA_USE_EXT_KEYCODES
+ bool "Tosa keyboard: use extended keycodes"
+ depends on KEYBOARD_TOSA
+ help
+ Say Y here to enable the tosa keyboard driver to generate extended
+ (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+ by either console keyboard driver or by Kdrive keybd driver.
+
+ Say Y only if you know, what you are doing!
+
+config KEYBOARD_XTKBD
+ tristate "XT keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use the old IBM PC/XT keyboard (or
+ compatible) on your system. This is only possible with a
+ parallel port keyboard adapter, you cannot connect it to the
+ keyboard port on a PC that runs Linux.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xtkbd.
endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 156b647..b5b5eae 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -4,29 +4,30 @@
# Each configuration option enables a list of files.
-obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
-obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
-obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
-obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
+obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
-obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
-obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
-obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
+obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
+obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
-obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
-obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
+obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
+obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
+obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
+obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o
+obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
+obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
+obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
-obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
-obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
-obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
-obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
-obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
-obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
-obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
+obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
+obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
+obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
+obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 2157cd7..efed0c9 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -29,7 +29,8 @@
struct gpio_button_data {
struct gpio_keys_button *button;
struct input_dev *input;
- struct delayed_work work;
+ struct timer_list timer;
+ struct work_struct work;
};
struct gpio_keys_drvdata {
@@ -40,7 +41,7 @@
static void gpio_keys_report_event(struct work_struct *work)
{
struct gpio_button_data *bdata =
- container_of(work, struct gpio_button_data, work.work);
+ container_of(work, struct gpio_button_data, work);
struct gpio_keys_button *button = bdata->button;
struct input_dev *input = bdata->input;
unsigned int type = button->type ?: EV_KEY;
@@ -50,17 +51,25 @@
input_sync(input);
}
+static void gpio_keys_timer(unsigned long _data)
+{
+ struct gpio_button_data *data = (struct gpio_button_data *)_data;
+
+ schedule_work(&data->work);
+}
+
static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
{
struct gpio_button_data *bdata = dev_id;
struct gpio_keys_button *button = bdata->button;
- unsigned long delay;
BUG_ON(irq != gpio_to_irq(button->gpio));
- delay = button->debounce_interval ?
- msecs_to_jiffies(button->debounce_interval) : 0;
- schedule_delayed_work(&bdata->work, delay);
+ if (button->debounce_interval)
+ mod_timer(&bdata->timer,
+ jiffies + msecs_to_jiffies(button->debounce_interval));
+ else
+ schedule_work(&bdata->work);
return IRQ_HANDLED;
}
@@ -107,7 +116,9 @@
bdata->input = input;
bdata->button = button;
- INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event);
+ setup_timer(&bdata->timer,
+ gpio_keys_timer, (unsigned long)bdata);
+ INIT_WORK(&bdata->work, gpio_keys_report_event);
error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
if (error < 0) {
@@ -166,7 +177,9 @@
fail2:
while (--i >= 0) {
free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
- cancel_delayed_work_sync(&ddata->data[i].work);
+ if (pdata->buttons[i].debounce_interval)
+ del_timer_sync(&ddata->data[i].timer);
+ cancel_work_sync(&ddata->data[i].work);
gpio_free(pdata->buttons[i].gpio);
}
@@ -190,7 +203,9 @@
for (i = 0; i < pdata->nbuttons; i++) {
int irq = gpio_to_irq(pdata->buttons[i].gpio);
free_irq(irq, &ddata->data[i]);
- cancel_delayed_work_sync(&ddata->data[i].work);
+ if (pdata->buttons[i].debounce_interval)
+ del_timer_sync(&ddata->data[i].timer);
+ cancel_work_sync(&ddata->data[i].work);
gpio_free(pdata->buttons[i].gpio);
}
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
new file mode 100644
index 0000000..e9b2e7cb
--- /dev/null
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -0,0 +1,453 @@
+/*
+ * GPIO driven matrix keyboard driver
+ *
+ * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on corgikbd.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+
+struct matrix_keypad {
+ const struct matrix_keypad_platform_data *pdata;
+ struct input_dev *input_dev;
+ unsigned short *keycodes;
+
+ uint32_t last_key_state[MATRIX_MAX_COLS];
+ struct delayed_work work;
+ bool scan_pending;
+ bool stopped;
+ spinlock_t lock;
+};
+
+/*
+ * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause
+ * minmal side effect when scanning other columns, here it is configured to
+ * be input, and it should work on most platforms.
+ */
+static void __activate_col(const struct matrix_keypad_platform_data *pdata,
+ int col, bool on)
+{
+ bool level_on = !pdata->active_low;
+
+ if (on) {
+ gpio_direction_output(pdata->col_gpios[col], level_on);
+ } else {
+ gpio_set_value_cansleep(pdata->col_gpios[col], !level_on);
+ gpio_direction_input(pdata->col_gpios[col]);
+ }
+}
+
+static void activate_col(const struct matrix_keypad_platform_data *pdata,
+ int col, bool on)
+{
+ __activate_col(pdata, col, on);
+
+ if (on && pdata->col_scan_delay_us)
+ udelay(pdata->col_scan_delay_us);
+}
+
+static void activate_all_cols(const struct matrix_keypad_platform_data *pdata,
+ bool on)
+{
+ int col;
+
+ for (col = 0; col < pdata->num_col_gpios; col++)
+ __activate_col(pdata, col, on);
+}
+
+static bool row_asserted(const struct matrix_keypad_platform_data *pdata,
+ int row)
+{
+ return gpio_get_value_cansleep(pdata->row_gpios[row]) ?
+ !pdata->active_low : pdata->active_low;
+}
+
+static void enable_row_irqs(struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+static void disable_row_irqs(struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+/*
+ * This gets the keys from keyboard and reports it to input subsystem
+ */
+static void matrix_keypad_scan(struct work_struct *work)
+{
+ struct matrix_keypad *keypad =
+ container_of(work, struct matrix_keypad, work.work);
+ struct input_dev *input_dev = keypad->input_dev;
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ uint32_t new_state[MATRIX_MAX_COLS];
+ int row, col, code;
+
+ /* de-activate all columns for scanning */
+ activate_all_cols(pdata, false);
+
+ memset(new_state, 0, sizeof(new_state));
+
+ /* assert each column and read the row status out */
+ for (col = 0; col < pdata->num_col_gpios; col++) {
+
+ activate_col(pdata, col, true);
+
+ for (row = 0; row < pdata->num_row_gpios; row++)
+ new_state[col] |=
+ row_asserted(pdata, row) ? (1 << row) : 0;
+
+ activate_col(pdata, col, false);
+ }
+
+ for (col = 0; col < pdata->num_col_gpios; col++) {
+ uint32_t bits_changed;
+
+ bits_changed = keypad->last_key_state[col] ^ new_state[col];
+ if (bits_changed == 0)
+ continue;
+
+ for (row = 0; row < pdata->num_row_gpios; row++) {
+ if ((bits_changed & (1 << row)) == 0)
+ continue;
+
+ code = (row << 4) + col;
+ input_event(input_dev, EV_MSC, MSC_SCAN, code);
+ input_report_key(input_dev,
+ keypad->keycodes[code],
+ new_state[col] & (1 << row));
+ }
+ }
+ input_sync(input_dev);
+
+ memcpy(keypad->last_key_state, new_state, sizeof(new_state));
+
+ activate_all_cols(pdata, true);
+
+ /* Enable IRQs again */
+ spin_lock_irq(&keypad->lock);
+ keypad->scan_pending = false;
+ enable_row_irqs(keypad);
+ spin_unlock_irq(&keypad->lock);
+}
+
+static irqreturn_t matrix_keypad_interrupt(int irq, void *id)
+{
+ struct matrix_keypad *keypad = id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&keypad->lock, flags);
+
+ /*
+ * See if another IRQ beaten us to it and scheduled the
+ * scan already. In that case we should not try to
+ * disable IRQs again.
+ */
+ if (unlikely(keypad->scan_pending || keypad->stopped))
+ goto out;
+
+ disable_row_irqs(keypad);
+ keypad->scan_pending = true;
+ schedule_delayed_work(&keypad->work,
+ msecs_to_jiffies(keypad->pdata->debounce_ms));
+
+out:
+ spin_unlock_irqrestore(&keypad->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static int matrix_keypad_start(struct input_dev *dev)
+{
+ struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+ keypad->stopped = false;
+ mb();
+
+ /*
+ * Schedule an immediate key scan to capture current key state;
+ * columns will be activated and IRQs be enabled after the scan.
+ */
+ schedule_delayed_work(&keypad->work, 0);
+
+ return 0;
+}
+
+static void matrix_keypad_stop(struct input_dev *dev)
+{
+ struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+ keypad->stopped = true;
+ mb();
+ flush_work(&keypad->work.work);
+ /*
+ * matrix_keypad_scan() will leave IRQs enabled;
+ * we should disable them now.
+ */
+ disable_row_irqs(keypad);
+}
+
+#ifdef CONFIG_PM
+static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ matrix_keypad_stop(keypad->input_dev);
+
+ if (device_may_wakeup(&pdev->dev))
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ enable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+ return 0;
+}
+
+static int matrix_keypad_resume(struct platform_device *pdev)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ if (device_may_wakeup(&pdev->dev))
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ disable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+ matrix_keypad_start(keypad->input_dev);
+
+ return 0;
+}
+#else
+#define matrix_keypad_suspend NULL
+#define matrix_keypad_resume NULL
+#endif
+
+static int __devinit init_matrix_gpio(struct platform_device *pdev,
+ struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i, err = -EINVAL;
+
+ /* initialized strobe lines as outputs, activated */
+ for (i = 0; i < pdata->num_col_gpios; i++) {
+ err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col");
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to request GPIO%d for COL%d\n",
+ pdata->col_gpios[i], i);
+ goto err_free_cols;
+ }
+
+ gpio_direction_output(pdata->col_gpios[i], !pdata->active_low);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row");
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to request GPIO%d for ROW%d\n",
+ pdata->row_gpios[i], i);
+ goto err_free_rows;
+ }
+
+ gpio_direction_input(pdata->row_gpios[i]);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+ matrix_keypad_interrupt,
+ IRQF_DISABLED |
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "matrix-keypad", keypad);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to acquire interrupt for GPIO line %i\n",
+ pdata->row_gpios[i]);
+ goto err_free_irqs;
+ }
+ }
+
+ /* initialized as disabled - enabled by input->open */
+ disable_row_irqs(keypad);
+ return 0;
+
+err_free_irqs:
+ while (--i >= 0)
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ i = pdata->num_row_gpios;
+err_free_rows:
+ while (--i >= 0)
+ gpio_free(pdata->row_gpios[i]);
+ i = pdata->num_col_gpios;
+err_free_cols:
+ while (--i >= 0)
+ gpio_free(pdata->col_gpios[i]);
+
+ return err;
+}
+
+static int __devinit matrix_keypad_probe(struct platform_device *pdev)
+{
+ const struct matrix_keypad_platform_data *pdata;
+ const struct matrix_keymap_data *keymap_data;
+ struct matrix_keypad *keypad;
+ struct input_dev *input_dev;
+ unsigned short *keycodes;
+ int i;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
+ }
+
+ keymap_data = pdata->keymap_data;
+ if (!keymap_data) {
+ dev_err(&pdev->dev, "no keymap data defined\n");
+ return -EINVAL;
+ }
+
+ if (!keymap_data->max_keymap_size) {
+ dev_err(&pdev->dev, "invalid keymap data supplied\n");
+ return -EINVAL;
+ }
+
+ keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
+ keycodes = kzalloc(keymap_data->max_keymap_size *
+ sizeof(keypad->keycodes),
+ GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!keypad || !keycodes || !input_dev) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ keypad->input_dev = input_dev;
+ keypad->pdata = pdata;
+ keypad->keycodes = keycodes;
+ keypad->stopped = true;
+ INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
+ spin_lock_init(&keypad->lock);
+
+ input_dev->name = pdev->name;
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->open = matrix_keypad_start;
+ input_dev->close = matrix_keypad_stop;
+
+ input_dev->keycode = keycodes;
+ input_dev->keycodesize = sizeof(*keycodes);
+ input_dev->keycodemax = keymap_data->max_keymap_size;
+
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ unsigned int key = keymap_data->keymap[i];
+ unsigned int row = KEY_ROW(key);
+ unsigned int col = KEY_COL(key);
+ unsigned short code = KEY_VAL(key);
+
+ keycodes[(row << 4) + col] = code;
+ __set_bit(code, input_dev->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(input_dev, keypad);
+
+ err = init_matrix_gpio(pdev, keypad);
+ if (err)
+ goto err_free_mem;
+
+ err = input_register_device(keypad->input_dev);
+ if (err)
+ goto err_free_mem;
+
+ device_init_wakeup(&pdev->dev, pdata->wakeup);
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(keycodes);
+ kfree(keypad);
+ return err;
+}
+
+static int __devexit matrix_keypad_remove(struct platform_device *pdev)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ device_init_wakeup(&pdev->dev, 0);
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ gpio_free(pdata->row_gpios[i]);
+ }
+
+ for (i = 0; i < pdata->num_col_gpios; i++)
+ gpio_free(pdata->col_gpios[i]);
+
+ input_unregister_device(keypad->input_dev);
+ platform_set_drvdata(pdev, NULL);
+ kfree(keypad->keycodes);
+ kfree(keypad);
+
+ return 0;
+}
+
+static struct platform_driver matrix_keypad_driver = {
+ .probe = matrix_keypad_probe,
+ .remove = __devexit_p(matrix_keypad_remove),
+ .suspend = matrix_keypad_suspend,
+ .resume = matrix_keypad_resume,
+ .driver = {
+ .name = "matrix-keypad",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init matrix_keypad_init(void)
+{
+ return platform_driver_register(&matrix_keypad_driver);
+}
+
+static void __exit matrix_keypad_exit(void)
+{
+ platform_driver_unregister(&matrix_keypad_driver);
+}
+
+module_init(matrix_keypad_init);
+module_exit(matrix_keypad_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:matrix-keypad");
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 5e5eb88..7b6ce17 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -46,7 +46,7 @@
input_sync(input);
}
-static int __init gpio_mouse_probe(struct platform_device *pdev)
+static int __devinit gpio_mouse_probe(struct platform_device *pdev)
{
struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
struct input_polled_dev *input_poll;
@@ -170,10 +170,8 @@
return 0;
}
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:gpio_mouse");
-
static struct platform_driver gpio_mouse_device_driver = {
+ .probe = gpio_mouse_probe,
.remove = __devexit_p(gpio_mouse_remove),
.driver = {
.name = "gpio_mouse",
@@ -183,8 +181,7 @@
static int __init gpio_mouse_init(void)
{
- return platform_driver_probe(&gpio_mouse_device_driver,
- gpio_mouse_probe);
+ return platform_driver_register(&gpio_mouse_device_driver);
}
module_init(gpio_mouse_init);
@@ -197,3 +194,5 @@
MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
MODULE_DESCRIPTION("GPIO mouse driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
+
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fb8a3cd..924e8ed 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -392,6 +392,34 @@
DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
},
},
+ {
+ .ident = "Acer Aspire One 150",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
+ },
+ },
+ {
+ .ident = "Advent 4211",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"),
+ },
+ },
+ {
+ .ident = "Medion Akoya Mini E1210",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "E1210"),
+ },
+ },
+ {
+ .ident = "Mivvy M310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
+ },
+ },
{ }
};
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index f919bf5..582245c 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -934,10 +934,11 @@
static int i8042_suspend(struct platform_device *dev, pm_message_t state)
{
- if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) {
+ if (!i8042_suspended && state.event == PM_EVENT_SUSPEND)
i8042_controller_reset();
- i8042_suspended = true;
- }
+
+ i8042_suspended = state.event == PM_EVENT_SUSPEND ||
+ state.event == PM_EVENT_FREEZE;
return 0;
}
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index fb17573..d66f494 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -935,10 +935,11 @@
{
struct serio *serio = to_serio_port(dev);
- if (!serio->suspended && state.event == PM_EVENT_SUSPEND) {
+ if (!serio->suspended && state.event == PM_EVENT_SUSPEND)
serio_cleanup(serio);
- serio->suspended = true;
- }
+
+ serio->suspended = state.event == PM_EVENT_SUSPEND ||
+ state.event == PM_EVENT_FREEZE;
return 0;
}
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 38bf863..c896d6a 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -384,6 +384,8 @@
wacom_report_key(wcombo, BTN_STYLUS2, 0);
wacom_report_key(wcombo, BTN_TOUCH, 0);
wacom_report_abs(wcombo, ABS_WHEEL, 0);
+ if (wacom->features->type >= INTUOS3S)
+ wacom_report_abs(wcombo, ABS_Z, 0);
}
wacom_report_key(wcombo, wacom->tool[idx], 0);
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
@@ -836,6 +838,7 @@
{ "Wacom DTU710", 8, 34080, 27660, 511, 0, PL },
{ "Wacom DTF521", 8, 6282, 4762, 511, 0, PL },
{ "Wacom DTF720", 8, 6858, 5506, 511, 0, PL },
+ { "Wacom DTF720a", 8, 6858, 5506, 511, 0, PL },
{ "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
@@ -897,8 +900,9 @@
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 7ac12cb..5b6e58a 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -32,8 +32,7 @@
* This driver was tested with firmware revision A4.
*/
-#if defined(CONFIG_KEYBOARD_DM355EVM) \
- || defined(CONFIG_KEYBOARD_DM355EVM_MODULE)
+#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE)
#define msp_has_keyboard() true
#else
#define msp_has_keyboard() false
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
new file mode 100644
index 0000000..7964516
--- /dev/null
+++ b/include/linux/input/matrix_keypad.h
@@ -0,0 +1,65 @@
+#ifndef _MATRIX_KEYPAD_H
+#define _MATRIX_KEYPAD_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define MATRIX_MAX_ROWS 16
+#define MATRIX_MAX_COLS 16
+
+#define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
+ (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
+ (val & 0xffff))
+
+#define KEY_ROW(k) (((k) >> 24) & 0xff)
+#define KEY_COL(k) (((k) >> 16) & 0xff)
+#define KEY_VAL(k) ((k) & 0xffff)
+
+/**
+ * struct matrix_keymap_data - keymap for matrix keyboards
+ * @keymap: pointer to array of uint32 values encoded with KEY() macro
+ * representing keymap
+ * @keymap_size: number of entries (initialized) in this keymap
+ * @max_keymap_size: maximum size of keymap supported by the device
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement matrix-like keypads/keyboards.
+ */
+struct matrix_keymap_data {
+ const uint32_t *keymap;
+ unsigned int keymap_size;
+ unsigned int max_keymap_size;
+};
+
+/**
+ * struct matrix_keypad_platform_data - platform-dependent keypad data
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @row_gpios: array of gpio numbers reporesenting rows
+ * @col_gpios: array of gpio numbers reporesenting colums
+ * @num_row_gpios: actual number of row gpios used by device
+ * @num_col_gpios: actual number of col gpios used by device
+ * @col_scan_delay_us: delay, measured in microseconds, that is
+ * needed before we can keypad after activating column gpio
+ * @debounce_ms: debounce interval in milliseconds
+ *
+ * This structure represents platform-specific data that use used by
+ * matrix_keypad driver to perform proper initialization.
+ */
+struct matrix_keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+
+ unsigned int row_gpios[MATRIX_MAX_ROWS];
+ unsigned int col_gpios[MATRIX_MAX_COLS];
+ unsigned int num_row_gpios;
+ unsigned int num_col_gpios;
+
+ unsigned int col_scan_delay_us;
+
+ /* key debounce interval in milli-second */
+ unsigned int debounce_ms;
+
+ bool active_low;
+ bool wakeup;
+};
+
+#endif /* _MATRIX_KEYPAD_H */