| /* |
| * drivers/s390/cio/css.c |
| * driver for channel subsystem |
| * |
| * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, |
| * IBM Corporation |
| * Author(s): Arnd Bergmann (arndb@de.ibm.com) |
| * Cornelia Huck (cornelia.huck@de.ibm.com) |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/list.h> |
| |
| #include "css.h" |
| #include "cio.h" |
| #include "cio_debug.h" |
| #include "ioasm.h" |
| #include "chsc.h" |
| #include "device.h" |
| #include "idset.h" |
| #include "chp.h" |
| |
| int css_init_done = 0; |
| static int need_reprobe = 0; |
| static int max_ssid = 0; |
| |
| struct channel_subsystem *css[__MAX_CSSID + 1]; |
| |
| int css_characteristics_avail = 0; |
| |
| int |
| for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *data) |
| { |
| struct subchannel_id schid; |
| int ret; |
| |
| init_subchannel_id(&schid); |
| ret = -ENODEV; |
| do { |
| do { |
| ret = fn(schid, data); |
| if (ret) |
| break; |
| } while (schid.sch_no++ < __MAX_SUBCHANNEL); |
| schid.sch_no = 0; |
| } while (schid.ssid++ < max_ssid); |
| return ret; |
| } |
| |
| static struct subchannel * |
| css_alloc_subchannel(struct subchannel_id schid) |
| { |
| struct subchannel *sch; |
| int ret; |
| |
| sch = kmalloc (sizeof (*sch), GFP_KERNEL | GFP_DMA); |
| if (sch == NULL) |
| return ERR_PTR(-ENOMEM); |
| ret = cio_validate_subchannel (sch, schid); |
| if (ret < 0) { |
| kfree(sch); |
| return ERR_PTR(ret); |
| } |
| |
| if (sch->st != SUBCHANNEL_TYPE_IO) { |
| /* For now we ignore all non-io subchannels. */ |
| kfree(sch); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* |
| * Set intparm to subchannel address. |
| * This is fine even on 64bit since the subchannel is always located |
| * under 2G. |
| */ |
| sch->schib.pmcw.intparm = (__u32)(unsigned long)sch; |
| ret = cio_modify(sch); |
| if (ret) { |
| kfree(sch->lock); |
| kfree(sch); |
| return ERR_PTR(ret); |
| } |
| return sch; |
| } |
| |
| static void |
| css_free_subchannel(struct subchannel *sch) |
| { |
| if (sch) { |
| /* Reset intparm to zeroes. */ |
| sch->schib.pmcw.intparm = 0; |
| cio_modify(sch); |
| kfree(sch->lock); |
| kfree(sch); |
| } |
| } |
| |
| static void |
| css_subchannel_release(struct device *dev) |
| { |
| struct subchannel *sch; |
| |
| sch = to_subchannel(dev); |
| if (!cio_is_console(sch->schid)) { |
| kfree(sch->lock); |
| kfree(sch); |
| } |
| } |
| |
| static int css_sch_device_register(struct subchannel *sch) |
| { |
| int ret; |
| |
| mutex_lock(&sch->reg_mutex); |
| ret = device_register(&sch->dev); |
| mutex_unlock(&sch->reg_mutex); |
| return ret; |
| } |
| |
| void css_sch_device_unregister(struct subchannel *sch) |
| { |
| mutex_lock(&sch->reg_mutex); |
| device_unregister(&sch->dev); |
| mutex_unlock(&sch->reg_mutex); |
| } |
| |
| static void ssd_from_pmcw(struct chsc_ssd_info *ssd, struct pmcw *pmcw) |
| { |
| int i; |
| int mask; |
| |
| memset(ssd, 0, sizeof(struct chsc_ssd_info)); |
| ssd->path_mask = pmcw->pim; |
| for (i = 0; i < 8; i++) { |
| mask = 0x80 >> i; |
| if (pmcw->pim & mask) { |
| chp_id_init(&ssd->chpid[i]); |
| ssd->chpid[i].id = pmcw->chpid[i]; |
| } |
| } |
| } |
| |
| static void ssd_register_chpids(struct chsc_ssd_info *ssd) |
| { |
| int i; |
| int mask; |
| |
| for (i = 0; i < 8; i++) { |
| mask = 0x80 >> i; |
| if (ssd->path_mask & mask) |
| if (!chp_is_registered(ssd->chpid[i])) |
| chp_new(ssd->chpid[i]); |
| } |
| } |
| |
| void css_update_ssd_info(struct subchannel *sch) |
| { |
| int ret; |
| |
| if (cio_is_console(sch->schid)) { |
| /* Console is initialized too early for functions requiring |
| * memory allocation. */ |
| ssd_from_pmcw(&sch->ssd_info, &sch->schib.pmcw); |
| } else { |
| ret = chsc_get_ssd_info(sch->schid, &sch->ssd_info); |
| if (ret) |
| ssd_from_pmcw(&sch->ssd_info, &sch->schib.pmcw); |
| ssd_register_chpids(&sch->ssd_info); |
| } |
| } |
| |
| static int css_register_subchannel(struct subchannel *sch) |
| { |
| int ret; |
| |
| /* Initialize the subchannel structure */ |
| sch->dev.parent = &css[0]->device; |
| sch->dev.bus = &css_bus_type; |
| sch->dev.release = &css_subchannel_release; |
| sch->dev.groups = subch_attr_groups; |
| css_update_ssd_info(sch); |
| /* make it known to the system */ |
| ret = css_sch_device_register(sch); |
| if (ret) { |
| CIO_MSG_EVENT(0, "Could not register sch 0.%x.%04x: %d\n", |
| sch->schid.ssid, sch->schid.sch_no, ret); |
| return ret; |
| } |
| return ret; |
| } |
| |
| static int css_probe_device(struct subchannel_id schid) |
| { |
| int ret; |
| struct subchannel *sch; |
| |
| sch = css_alloc_subchannel(schid); |
| if (IS_ERR(sch)) |
| return PTR_ERR(sch); |
| ret = css_register_subchannel(sch); |
| if (ret) |
| css_free_subchannel(sch); |
| return ret; |
| } |
| |
| static int |
| check_subchannel(struct device * dev, void * data) |
| { |
| struct subchannel *sch; |
| struct subchannel_id *schid = data; |
| |
| sch = to_subchannel(dev); |
| return schid_equal(&sch->schid, schid); |
| } |
| |
| struct subchannel * |
| get_subchannel_by_schid(struct subchannel_id schid) |
| { |
| struct device *dev; |
| |
| dev = bus_find_device(&css_bus_type, NULL, |
| &schid, check_subchannel); |
| |
| return dev ? to_subchannel(dev) : NULL; |
| } |
| |
| static int css_get_subchannel_status(struct subchannel *sch) |
| { |
| struct schib schib; |
| |
| if (stsch(sch->schid, &schib) || !schib.pmcw.dnv) |
| return CIO_GONE; |
| if (sch->schib.pmcw.dnv && (schib.pmcw.dev != sch->schib.pmcw.dev)) |
| return CIO_REVALIDATE; |
| if (!sch->lpm) |
| return CIO_NO_PATH; |
| return CIO_OPER; |
| } |
| |
| static int css_evaluate_known_subchannel(struct subchannel *sch, int slow) |
| { |
| int event, ret, disc; |
| unsigned long flags; |
| enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE } action; |
| |
| spin_lock_irqsave(sch->lock, flags); |
| disc = device_is_disconnected(sch); |
| if (disc && slow) { |
| /* Disconnected devices are evaluated directly only.*/ |
| spin_unlock_irqrestore(sch->lock, flags); |
| return 0; |
| } |
| /* No interrupt after machine check - kill pending timers. */ |
| device_kill_pending_timer(sch); |
| if (!disc && !slow) { |
| /* Non-disconnected devices are evaluated on the slow path. */ |
| spin_unlock_irqrestore(sch->lock, flags); |
| return -EAGAIN; |
| } |
| event = css_get_subchannel_status(sch); |
| CIO_MSG_EVENT(4, "Evaluating schid 0.%x.%04x, event %d, %s, %s path.\n", |
| sch->schid.ssid, sch->schid.sch_no, event, |
| disc ? "disconnected" : "normal", |
| slow ? "slow" : "fast"); |
| /* Analyze subchannel status. */ |
| action = NONE; |
| switch (event) { |
| case CIO_NO_PATH: |
| if (disc) { |
| /* Check if paths have become available. */ |
| action = REPROBE; |
| break; |
| } |
| /* fall through */ |
| case CIO_GONE: |
| /* Prevent unwanted effects when opening lock. */ |
| cio_disable_subchannel(sch); |
| device_set_disconnected(sch); |
| /* Ask driver what to do with device. */ |
| action = UNREGISTER; |
| if (sch->driver && sch->driver->notify) { |
| spin_unlock_irqrestore(sch->lock, flags); |
| ret = sch->driver->notify(&sch->dev, event); |
| spin_lock_irqsave(sch->lock, flags); |
| if (ret) |
| action = NONE; |
| } |
| break; |
| case CIO_REVALIDATE: |
| /* Device will be removed, so no notify necessary. */ |
| if (disc) |
| /* Reprobe because immediate unregister might block. */ |
| action = REPROBE; |
| else |
| action = UNREGISTER_PROBE; |
| break; |
| case CIO_OPER: |
| if (disc) |
| /* Get device operational again. */ |
| action = REPROBE; |
| break; |
| } |
| /* Perform action. */ |
| ret = 0; |
| switch (action) { |
| case UNREGISTER: |
| case UNREGISTER_PROBE: |
| /* Unregister device (will use subchannel lock). */ |
| spin_unlock_irqrestore(sch->lock, flags); |
| css_sch_device_unregister(sch); |
| spin_lock_irqsave(sch->lock, flags); |
| |
| /* Reset intparm to zeroes. */ |
| sch->schib.pmcw.intparm = 0; |
| cio_modify(sch); |
| break; |
| case REPROBE: |
| device_trigger_reprobe(sch); |
| break; |
| default: |
| break; |
| } |
| spin_unlock_irqrestore(sch->lock, flags); |
| /* Probe if necessary. */ |
| if (action == UNREGISTER_PROBE) |
| ret = css_probe_device(sch->schid); |
| |
| return ret; |
| } |
| |
| static int css_evaluate_new_subchannel(struct subchannel_id schid, int slow) |
| { |
| struct schib schib; |
| |
| if (!slow) { |
| /* Will be done on the slow path. */ |
| return -EAGAIN; |
| } |
| if (stsch_err(schid, &schib) || !schib.pmcw.dnv) { |
| /* Unusable - ignore. */ |
| return 0; |
| } |
| CIO_MSG_EVENT(4, "Evaluating schid 0.%x.%04x, event %d, unknown, " |
| "slow path.\n", schid.ssid, schid.sch_no, CIO_OPER); |
| |
| return css_probe_device(schid); |
| } |
| |
| static void css_evaluate_subchannel(struct subchannel_id schid, int slow) |
| { |
| struct subchannel *sch; |
| int ret; |
| |
| sch = get_subchannel_by_schid(schid); |
| if (sch) { |
| ret = css_evaluate_known_subchannel(sch, slow); |
| put_device(&sch->dev); |
| } else |
| ret = css_evaluate_new_subchannel(schid, slow); |
| if (ret == -EAGAIN) |
| css_schedule_eval(schid); |
| } |
| |
| static struct idset *slow_subchannel_set; |
| static spinlock_t slow_subchannel_lock; |
| |
| static int __init slow_subchannel_init(void) |
| { |
| spin_lock_init(&slow_subchannel_lock); |
| slow_subchannel_set = idset_sch_new(); |
| if (!slow_subchannel_set) { |
| CIO_MSG_EVENT(0, "could not allocate slow subchannel set\n"); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| static void css_slow_path_func(struct work_struct *unused) |
| { |
| struct subchannel_id schid; |
| |
| CIO_TRACE_EVENT(4, "slowpath"); |
| spin_lock_irq(&slow_subchannel_lock); |
| init_subchannel_id(&schid); |
| while (idset_sch_get_first(slow_subchannel_set, &schid)) { |
| idset_sch_del(slow_subchannel_set, schid); |
| spin_unlock_irq(&slow_subchannel_lock); |
| css_evaluate_subchannel(schid, 1); |
| spin_lock_irq(&slow_subchannel_lock); |
| } |
| spin_unlock_irq(&slow_subchannel_lock); |
| } |
| |
| static DECLARE_WORK(slow_path_work, css_slow_path_func); |
| struct workqueue_struct *slow_path_wq; |
| |
| void css_schedule_eval(struct subchannel_id schid) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&slow_subchannel_lock, flags); |
| idset_sch_add(slow_subchannel_set, schid); |
| queue_work(slow_path_wq, &slow_path_work); |
| spin_unlock_irqrestore(&slow_subchannel_lock, flags); |
| } |
| |
| void css_schedule_eval_all(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&slow_subchannel_lock, flags); |
| idset_fill(slow_subchannel_set); |
| queue_work(slow_path_wq, &slow_path_work); |
| spin_unlock_irqrestore(&slow_subchannel_lock, flags); |
| } |
| |
| /* Reprobe subchannel if unregistered. */ |
| static int reprobe_subchannel(struct subchannel_id schid, void *data) |
| { |
| struct subchannel *sch; |
| int ret; |
| |
| CIO_MSG_EVENT(6, "cio: reprobe 0.%x.%04x\n", |
| schid.ssid, schid.sch_no); |
| if (need_reprobe) |
| return -EAGAIN; |
| |
| sch = get_subchannel_by_schid(schid); |
| if (sch) { |
| /* Already known. */ |
| put_device(&sch->dev); |
| return 0; |
| } |
| |
| ret = css_probe_device(schid); |
| switch (ret) { |
| case 0: |
| break; |
| case -ENXIO: |
| case -ENOMEM: |
| /* These should abort looping */ |
| break; |
| default: |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /* Work function used to reprobe all unregistered subchannels. */ |
| static void reprobe_all(struct work_struct *unused) |
| { |
| int ret; |
| |
| CIO_MSG_EVENT(2, "reprobe start\n"); |
| |
| need_reprobe = 0; |
| /* Make sure initial subchannel scan is done. */ |
| wait_event(ccw_device_init_wq, |
| atomic_read(&ccw_device_init_count) == 0); |
| ret = for_each_subchannel(reprobe_subchannel, NULL); |
| |
| CIO_MSG_EVENT(2, "reprobe done (rc=%d, need_reprobe=%d)\n", ret, |
| need_reprobe); |
| } |
| |
| static DECLARE_WORK(css_reprobe_work, reprobe_all); |
| |
| /* Schedule reprobing of all unregistered subchannels. */ |
| void css_schedule_reprobe(void) |
| { |
| need_reprobe = 1; |
| queue_work(ccw_device_work, &css_reprobe_work); |
| } |
| |
| EXPORT_SYMBOL_GPL(css_schedule_reprobe); |
| |
| /* |
| * Called from the machine check handler for subchannel report words. |
| */ |
| void css_process_crw(int rsid1, int rsid2) |
| { |
| struct subchannel_id mchk_schid; |
| |
| CIO_CRW_EVENT(2, "source is subchannel %04X, subsystem id %x\n", |
| rsid1, rsid2); |
| init_subchannel_id(&mchk_schid); |
| mchk_schid.sch_no = rsid1; |
| if (rsid2 != 0) |
| mchk_schid.ssid = (rsid2 >> 8) & 3; |
| |
| /* |
| * Since we are always presented with IPI in the CRW, we have to |
| * use stsch() to find out if the subchannel in question has come |
| * or gone. |
| */ |
| css_evaluate_subchannel(mchk_schid, 0); |
| } |
| |
| static int __init |
| __init_channel_subsystem(struct subchannel_id schid, void *data) |
| { |
| struct subchannel *sch; |
| int ret; |
| |
| if (cio_is_console(schid)) |
| sch = cio_get_console_subchannel(); |
| else { |
| sch = css_alloc_subchannel(schid); |
| if (IS_ERR(sch)) |
| ret = PTR_ERR(sch); |
| else |
| ret = 0; |
| switch (ret) { |
| case 0: |
| break; |
| case -ENOMEM: |
| panic("Out of memory in init_channel_subsystem\n"); |
| /* -ENXIO: no more subchannels. */ |
| case -ENXIO: |
| return ret; |
| /* -EIO: this subchannel set not supported. */ |
| case -EIO: |
| return ret; |
| default: |
| return 0; |
| } |
| } |
| /* |
| * We register ALL valid subchannels in ioinfo, even those |
| * that have been present before init_channel_subsystem. |
| * These subchannels can't have been registered yet (kmalloc |
| * not working) so we do it now. This is true e.g. for the |
| * console subchannel. |
| */ |
| css_register_subchannel(sch); |
| return 0; |
| } |
| |
| static void __init |
| css_generate_pgid(struct channel_subsystem *css, u32 tod_high) |
| { |
| if (css_characteristics_avail && css_general_characteristics.mcss) { |
| css->global_pgid.pgid_high.ext_cssid.version = 0x80; |
| css->global_pgid.pgid_high.ext_cssid.cssid = css->cssid; |
| } else { |
| #ifdef CONFIG_SMP |
| css->global_pgid.pgid_high.cpu_addr = hard_smp_processor_id(); |
| #else |
| css->global_pgid.pgid_high.cpu_addr = 0; |
| #endif |
| } |
| css->global_pgid.cpu_id = ((cpuid_t *) __LC_CPUID)->ident; |
| css->global_pgid.cpu_model = ((cpuid_t *) __LC_CPUID)->machine; |
| css->global_pgid.tod_high = tod_high; |
| |
| } |
| |
| static void |
| channel_subsystem_release(struct device *dev) |
| { |
| struct channel_subsystem *css; |
| |
| css = to_css(dev); |
| mutex_destroy(&css->mutex); |
| kfree(css); |
| } |
| |
| static ssize_t |
| css_cm_enable_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct channel_subsystem *css = to_css(dev); |
| |
| if (!css) |
| return 0; |
| return sprintf(buf, "%x\n", css->cm_enabled); |
| } |
| |
| static ssize_t |
| css_cm_enable_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct channel_subsystem *css = to_css(dev); |
| int ret; |
| |
| switch (buf[0]) { |
| case '0': |
| ret = css->cm_enabled ? chsc_secm(css, 0) : 0; |
| break; |
| case '1': |
| ret = css->cm_enabled ? 0 : chsc_secm(css, 1); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| return ret < 0 ? ret : count; |
| } |
| |
| static DEVICE_ATTR(cm_enable, 0644, css_cm_enable_show, css_cm_enable_store); |
| |
| static int __init setup_css(int nr) |
| { |
| u32 tod_high; |
| int ret; |
| |
| memset(css[nr], 0, sizeof(struct channel_subsystem)); |
| css[nr]->pseudo_subchannel = |
| kzalloc(sizeof(*css[nr]->pseudo_subchannel), GFP_KERNEL); |
| if (!css[nr]->pseudo_subchannel) |
| return -ENOMEM; |
| css[nr]->pseudo_subchannel->dev.parent = &css[nr]->device; |
| css[nr]->pseudo_subchannel->dev.release = css_subchannel_release; |
| sprintf(css[nr]->pseudo_subchannel->dev.bus_id, "defunct"); |
| ret = cio_create_sch_lock(css[nr]->pseudo_subchannel); |
| if (ret) { |
| kfree(css[nr]->pseudo_subchannel); |
| return ret; |
| } |
| mutex_init(&css[nr]->mutex); |
| css[nr]->valid = 1; |
| css[nr]->cssid = nr; |
| sprintf(css[nr]->device.bus_id, "css%x", nr); |
| css[nr]->device.release = channel_subsystem_release; |
| tod_high = (u32) (get_clock() >> 32); |
| css_generate_pgid(css[nr], tod_high); |
| return 0; |
| } |
| |
| /* |
| * Now that the driver core is running, we can setup our channel subsystem. |
| * The struct subchannel's are created during probing (except for the |
| * static console subchannel). |
| */ |
| static int __init |
| init_channel_subsystem (void) |
| { |
| int ret, i; |
| |
| ret = chsc_determine_css_characteristics(); |
| if (ret == -ENOMEM) |
| goto out; /* No need to continue. */ |
| if (ret == 0) |
| css_characteristics_avail = 1; |
| |
| ret = chsc_alloc_sei_area(); |
| if (ret) |
| goto out; |
| |
| ret = slow_subchannel_init(); |
| if (ret) |
| goto out; |
| |
| if ((ret = bus_register(&css_bus_type))) |
| goto out; |
| |
| /* Try to enable MSS. */ |
| ret = chsc_enable_facility(CHSC_SDA_OC_MSS); |
| switch (ret) { |
| case 0: /* Success. */ |
| max_ssid = __MAX_SSID; |
| break; |
| case -ENOMEM: |
| goto out_bus; |
| default: |
| max_ssid = 0; |
| } |
| /* Setup css structure. */ |
| for (i = 0; i <= __MAX_CSSID; i++) { |
| css[i] = kmalloc(sizeof(struct channel_subsystem), GFP_KERNEL); |
| if (!css[i]) { |
| ret = -ENOMEM; |
| goto out_unregister; |
| } |
| ret = setup_css(i); |
| if (ret) |
| goto out_free; |
| ret = device_register(&css[i]->device); |
| if (ret) |
| goto out_free_all; |
| if (css_characteristics_avail && |
| css_chsc_characteristics.secm) { |
| ret = device_create_file(&css[i]->device, |
| &dev_attr_cm_enable); |
| if (ret) |
| goto out_device; |
| } |
| ret = device_register(&css[i]->pseudo_subchannel->dev); |
| if (ret) |
| goto out_file; |
| } |
| css_init_done = 1; |
| |
| ctl_set_bit(6, 28); |
| |
| for_each_subchannel(__init_channel_subsystem, NULL); |
| return 0; |
| out_file: |
| device_remove_file(&css[i]->device, &dev_attr_cm_enable); |
| out_device: |
| device_unregister(&css[i]->device); |
| out_free_all: |
| kfree(css[i]->pseudo_subchannel->lock); |
| kfree(css[i]->pseudo_subchannel); |
| out_free: |
| kfree(css[i]); |
| out_unregister: |
| while (i > 0) { |
| i--; |
| device_unregister(&css[i]->pseudo_subchannel->dev); |
| if (css_characteristics_avail && css_chsc_characteristics.secm) |
| device_remove_file(&css[i]->device, |
| &dev_attr_cm_enable); |
| device_unregister(&css[i]->device); |
| } |
| out_bus: |
| bus_unregister(&css_bus_type); |
| out: |
| chsc_free_sei_area(); |
| kfree(slow_subchannel_set); |
| printk(KERN_WARNING"cio: failed to initialize css driver (%d)!\n", |
| ret); |
| return ret; |
| } |
| |
| int sch_is_pseudo_sch(struct subchannel *sch) |
| { |
| return sch == to_css(sch->dev.parent)->pseudo_subchannel; |
| } |
| |
| /* |
| * find a driver for a subchannel. They identify by the subchannel |
| * type with the exception that the console subchannel driver has its own |
| * subchannel type although the device is an i/o subchannel |
| */ |
| static int |
| css_bus_match (struct device *dev, struct device_driver *drv) |
| { |
| struct subchannel *sch = container_of (dev, struct subchannel, dev); |
| struct css_driver *driver = container_of (drv, struct css_driver, drv); |
| |
| if (sch->st == driver->subchannel_type) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int |
| css_probe (struct device *dev) |
| { |
| struct subchannel *sch; |
| |
| sch = to_subchannel(dev); |
| sch->driver = container_of (dev->driver, struct css_driver, drv); |
| return (sch->driver->probe ? sch->driver->probe(sch) : 0); |
| } |
| |
| static int |
| css_remove (struct device *dev) |
| { |
| struct subchannel *sch; |
| |
| sch = to_subchannel(dev); |
| return (sch->driver->remove ? sch->driver->remove(sch) : 0); |
| } |
| |
| static void |
| css_shutdown (struct device *dev) |
| { |
| struct subchannel *sch; |
| |
| sch = to_subchannel(dev); |
| if (sch->driver->shutdown) |
| sch->driver->shutdown(sch); |
| } |
| |
| struct bus_type css_bus_type = { |
| .name = "css", |
| .match = css_bus_match, |
| .probe = css_probe, |
| .remove = css_remove, |
| .shutdown = css_shutdown, |
| }; |
| |
| subsys_initcall(init_channel_subsystem); |
| |
| MODULE_LICENSE("GPL"); |
| EXPORT_SYMBOL(css_bus_type); |
| EXPORT_SYMBOL_GPL(css_characteristics_avail); |