phy-sun4i-usb: Simplify missing dr_mode handling
If we cannot get dr_mode or no id gpio is specified simply assume
peripheral mode, as this is always safe.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 02cb65e..fb2d4f3 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -124,7 +124,6 @@
bool regulator_on;
int index;
} phys[MAX_PHYS];
- int first_phy;
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
@@ -326,7 +325,10 @@
{
switch (data->dr_mode) {
case USB_DR_MODE_OTG:
- return gpiod_get_value_cansleep(data->id_det_gpio);
+ if (data->id_det_gpio)
+ return gpiod_get_value_cansleep(data->id_det_gpio);
+ else
+ return 1; /* Fallback to peripheral mode */
case USB_DR_MODE_HOST:
return 0;
case USB_DR_MODE_PERIPHERAL:
@@ -539,8 +541,7 @@
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
- if (args->args[0] < data->first_phy ||
- args->args[0] >= data->cfg->num_phys)
+ if (args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@@ -615,33 +616,18 @@
}
data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
- switch (data->dr_mode) {
- case USB_DR_MODE_OTG:
- /* otg without id_det makes no sense, and is not supported */
- if (!data->id_det_gpio) {
- dev_err(dev, "usb0_id_det missing or invalid\n");
- return -ENODEV;
- }
- /* fall through */
- case USB_DR_MODE_HOST:
- case USB_DR_MODE_PERIPHERAL:
- data->extcon = devm_extcon_dev_allocate(dev,
- sun4i_usb_phy0_cable);
- if (IS_ERR(data->extcon))
- return PTR_ERR(data->extcon);
- ret = devm_extcon_dev_register(dev, data->extcon);
- if (ret) {
- dev_err(dev, "failed to register extcon: %d\n", ret);
- return ret;
- }
- break;
- default:
- dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
- data->first_phy = 1;
+ data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
+ if (IS_ERR(data->extcon))
+ return PTR_ERR(data->extcon);
+
+ ret = devm_extcon_dev_register(dev, data->extcon);
+ if (ret) {
+ dev_err(dev, "failed to register extcon: %d\n", ret);
+ return ret;
}
- for (i = data->first_phy; i < data->cfg->num_phys; i++) {
+ for (i = 0; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];