ath9k_hw: fix PLL clock initialization for newer SoC
On AR934x and newer SoC devices, the layout of the AR_RTC_PLL_CONTROL
register changed. This currently breaks at least 5/10 MHz operation.
AR933x uses the old layout.
It might also have been causing other stability issues because of the
different location of the PLL_BYPASS bit which needs to be set during
PLL clock initialization.
This patch also removes more instances of hardcoded register values in
favor of properly computed ones with the PLL_BYPASS bit added.
Reported-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 95fdf93..2a938f4 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1244,12 +1244,23 @@
#define AR_CH0_DPLL3_PHASE_SHIFT_S 23
#define AR_PHY_CCA_NOM_VAL_2GHZ -118
+#define AR_RTC_9300_SOC_PLL_DIV_INT 0x0000003f
+#define AR_RTC_9300_SOC_PLL_DIV_INT_S 0
+#define AR_RTC_9300_SOC_PLL_DIV_FRAC 0x000fffc0
+#define AR_RTC_9300_SOC_PLL_DIV_FRAC_S 6
+#define AR_RTC_9300_SOC_PLL_REFDIV 0x01f00000
+#define AR_RTC_9300_SOC_PLL_REFDIV_S 20
+#define AR_RTC_9300_SOC_PLL_CLKSEL 0x06000000
+#define AR_RTC_9300_SOC_PLL_CLKSEL_S 25
+#define AR_RTC_9300_SOC_PLL_BYPASS 0x08000000
+
#define AR_RTC_9300_PLL_DIV 0x000003ff
#define AR_RTC_9300_PLL_DIV_S 0
#define AR_RTC_9300_PLL_REFDIV 0x00003C00
#define AR_RTC_9300_PLL_REFDIV_S 10
#define AR_RTC_9300_PLL_CLKSEL 0x0000C000
#define AR_RTC_9300_PLL_CLKSEL_S 14
+#define AR_RTC_9300_PLL_BYPASS 0x00010000
#define AR_RTC_9160_PLL_DIV 0x000003ff
#define AR_RTC_9160_PLL_DIV_S 0