sparc32: always define boot_cpu_id
Define boot_cpu_id in single-processor kernels as well. This is
to support architectures which can boot on other than CPU0.
Sam Ravnborg has written the cleanup parts by extracting
boot_cpu_id from smp_32.c into setup_32.c and cleaned up
sun4d_irq.c.
boot_cpu_id was initialized before BSS was cleared in
sun4c_continue_boot, instead boot_cpu_id is set to 0xff to
avoid BSS. If boot_cpu_id is untouched (0xff) by bootup code
it will be overwritten to 0. boot_cpu_id4 is automatically
calculated in common code.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/arch/sparc/include/asm/setup.h b/arch/sparc/include/asm/setup.h
index 2643c62..64718ba 100644
--- a/arch/sparc/include/asm/setup.h
+++ b/arch/sparc/include/asm/setup.h
@@ -11,4 +11,16 @@
# define COMMAND_LINE_SIZE 256
#endif
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SPARC32
+/* The CPU that was used for booting
+ * Only sun4d + leon may have boot_cpu_id != 0
+ */
+extern unsigned char boot_cpu_id;
+extern unsigned char boot_cpu_id4;
+#endif
+
+#endif /* __KERNEL__ */
+
#endif /* _SPARC_SETUP_H */
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index 5942349..520c615 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -816,10 +816,7 @@
.global leon_smp_init
leon_smp_init:
- sethi %hi(boot_cpu_id), %g1 ! master always 0
- stb %g0, [%g1 + %lo(boot_cpu_id)]
- sethi %hi(boot_cpu_id4), %g1 ! master always 0
- stb %g0, [%g1 + %lo(boot_cpu_id4)]
+ /* let boot_cpu_id default to 0 (master always 0) */
rd %asr17,%g1
srl %g1,28,%g1
@@ -893,9 +890,6 @@
sta %g4, [%g0] ASI_M_VIKING_TMP1
sethi %hi(boot_cpu_id), %g5
stb %g4, [%g5 + %lo(boot_cpu_id)]
- sll %g4, 2, %g4
- sethi %hi(boot_cpu_id4), %g5
- stb %g4, [%g5 + %lo(boot_cpu_id4)]
#endif
/* Fall through to sun4m_init */
@@ -1024,14 +1018,28 @@
bl 1b
add %o0, 0x1, %o0
+ /* If boot_cpu_id has not been setup by machine specific
+ * init-code above we default it to zero.
+ */
+ sethi %hi(boot_cpu_id), %g2
+ ldub [%g2 + %lo(boot_cpu_id)], %g3
+ cmp %g3, 0xff
+ bne 1f
+ nop
+ mov %g0, %g3
+ stub %g3, [%g2 + %lo(boot_cpu_id)]
+
+1: /* boot_cpu_id set. calculate boot_cpu_id4 = boot_cpu_id*4 */
+ sll %g3, 2, %g3
+ sethi %hi(boot_cpu_id4), %g2
+ stub %g3, [%g2 + %lo(boot_cpu_id4)]
+
/* Initialize the uwinmask value for init task just in case.
* But first make current_set[boot_cpu_id] point to something useful.
*/
set init_thread_union, %g6
set current_set, %g2
#ifdef CONFIG_SMP
- sethi %hi(boot_cpu_id4), %g3
- ldub [%g3 + %lo(boot_cpu_id4)], %g3
st %g6, [%g2]
add %g2, %g3, %g2
#endif
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index ef8a2ed..3609bde 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -103,6 +103,10 @@
/* Exported for mm/init.c:paging_init. */
unsigned long cmdline_memory_size __initdata = 0;
+/* which CPU booted us (0xff = not set) */
+unsigned char boot_cpu_id = 0xff; /* 0xff will make it into DATA section... */
+unsigned char boot_cpu_id4; /* boot_cpu_id << 2 */
+
static void
prom_console_write(struct console *con, const char *s, unsigned n)
{
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index 91c10fb..4a1d5b7 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -37,8 +37,6 @@
#include "irq.h"
volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
-unsigned char boot_cpu_id = 0;
-unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
cpumask_t smp_commenced_mask = CPU_MASK_NONE;
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 14a0435..b830914 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -14,6 +14,7 @@
#include <asm/io.h>
#include <asm/sbi.h>
#include <asm/cacheflush.h>
+#include <asm/setup.h>
#include "kernel.h"
#include "irq.h"
@@ -438,11 +439,9 @@
void __init sun4d_init_sbi_irq(void)
{
struct device_node *dp;
- int target_cpu = 0;
+ int target_cpu;
-#ifdef CONFIG_SMP
target_cpu = boot_cpu_id;
-#endif
for_each_node_by_name(dp, "sbi") {
int devid = of_getintprop_default(dp, "device-id", 0);
int board = of_getintprop_default(dp, "board#", 0);